Sunbeam Bedding GCSBCS-1-MASTER User's Manual
Contents
1. cotton or linen Please make sure the water reservoir is approximately 1 4 full of water Steam Ironing Follow the instructions for Filling the Water Reservoir 2 Plug the cord into a 120 Volt AC outlet Press the buttons to select desired fabric setting Allow iron to heat until Wait Ready light turns green indicating the unit is ready While the iron is heating make sure it is sitting on its heel rest on a stable protected surface w IMPORTANT When not ironing always set the Steam Lever to j Dry and the Fabric Select Buttons to OFF Turning Off Your Iron Turn the Steam Lever to Dry and press the Fabric Select Buttons until OFF is illuminated Unplug the iron from the power source WARNING NEVER yank the power cord when unplugging the iron This can damage the cord Storing Your Iron 1 Turn off iron following instructions above Allow the iron to cool N If you do not use your iron on a daily basis empty the water reservoir after each use for a longer iron life To do so unplug the iron turn the iron upside down open the fill hole cover and allow water to flow from the fill hole Shake the iron gently to remove trapped water drops Loosely loop the power cord around the heel rest and store the iron on its heel rest w IMPORTANT Wrapping the cord around the iron too tightly can damage the cord Visit www sunbeam com for an Ironing Guide and Ironing Tips Please2. do not return product to the place of purchase Call 1 800 458 8407 or visit www sunbeam com Refer to manual for safety and cleaning instructions For any questions please call 1 800 458 8407 or visit us at www sunbeam com 2011 Sunbeam Products Inc doing business as Jarden Consumer Solutions All rights reserved Distributed by Sunbeam Products Inc doing business as Jarden Consumer Solutions Boca Raton Florida 33431 Printed in China SPR 051211 385 PN 147424 www sunbeam com
3. unbeam Quick Start Guide TURBO Steam Master Professional Iron Using Your Iron GCSBCS 112 SPRAY MIST Release Covered Water Fill Hole to Reservoir Steam Select Dial Wait Ready Indicator Fabric Select Buttons SHOT OF STEAM Vertical Steam Button select models only 7 SPRAY MIST Trigger 8 Soft Grip Handle 9 360 Tangle Free Swivel Cord 10 See Through Water Reservoir Maximum Fill Line 11 Self Clean Button 12 Soleplate Oy OR w p Filling The Water Reservoir use tap water 1 Make sure the iron is unplugged Set the Steam Lever to oR Dry 2 Lift the Covered Water Fill Hole to Reservoir 3 Pour tap water into water reservoir using the easy pour cup included with your iron WARNING To prevent the risk of burns be careful when filling a hot iron with water Hot metal parts hot water and steam can cause injuries Dry Ironing 1 Make sure the Steam Lever is turned to the X Dry setting 2 Plug the cord into a 120 Volt AC outlet 3 Press the buttons to select desired Fabric Setting Allow the iron to heat until wait ready light turns green indicating the unit is ready While the iron is heating make sure it is sitting on its heel rest on a stable protected surface Caring for Your Iron After Use NOTE While the Steam Lever is turned to the SR Dry setting you may still use the SHOT OF STEAM or SPRAY MIST feature as long as the fabric setting is set to wool
Download Pdf Manuals
Related Search