Home

Speco Technologies CVC6146SCFF User's Manual

image

Contents

1. 5 SYNC INT Internal Synchronisation Move the arrow indicator to RETURN after complete the setup to return to SETUP menu ADJUST 1 When the SETUP menu screen is displayed select ADJUST using the Up and Down buttons SETUP LENS EXPOSURE WHITE BAL ATW DAY NIGHT COLOR 3DNR ON SPECIAL E Md DJUST RESET a EXIT 28 2 Select the desired mode by using Up or Down button ADJUST SHARPNESS BLUE RED RETURN SHARPNESS Improving image clarity The level can be adjusted to obtain an improved image However when the level is set too high it can distort the image or cause noise Select BLUE or RED to increase or decrease the value of R Gain RED and B Gain BLUE while monitoring the color of the image RETURN Move the arrow indicator to RETURN after complete the setup to return to SETUP menu RESET Resets the camera settings to the factory defaults EXIT Press the SET button in the EXIT menu to save the current settings and exit the SETUP menu 29 Trouble Shooting PROBLEM POSSIBLE CAUSE Northing appears on t Check the power cable power supply output and video the screen connection between the camera and monitor Are the camera lens or the lens glass dirty Clean the lens glass with a soft clean cloth The image on the Adjust the monitor controls as required screen is dim i f the camera is facing a very strong light change the camera position t
2. Adjust the lens focus The image on the t Adjust the contrast control of the monitor screen is dark f there is an intermediate device correctly set the 75Q Hi z ustedes t Check the camera is correctly connected to an appropriate and the surface of the camera is hot regulated power source Motion Detection t Has MOTION DET been set to ON the menu is not activated t Has MD AREA been properly defined The color of the t Check the settings in WHITE BALANCE menu picture is not correct The image on the Make sure that the camera isn t facing direct sunlight or screen flickers fluorescent lighting If necessary change the camera position The SENS UP does t Check that the AGC setting in the EXPOSURE menu is t set to OFF not work t Check the EXPOSURE menu and make sure SHUTTER is set to 30 speco technologies PRODUCT WARRANTIES AND INFORMATION EFFECTIVE JULY 8 2008 POLICY TERMS AND CONDITIONS OF SALE This statement of policy is in lieu of any other policy expressed or implied and no representative or person is authorized to assume for us any other liability or policy without our written consent We cannot be held responsible for typographical errors TERMS OF PAYMENT 2 10 days net 30 from invoice date of merchandise for qualified accounts or Visa MasterCard Amex net at time of order placement only other payment discounts do not apply 300 credit card minimum We reserve the right to
3. Left or Right button Available values or Status are displayed by pressing the Left or Right buttons Press the button until desired value status is displayed 4 After completing the setting move the arrow indicator to EXIT and press the SET button to EXIT Lens 1 Move the arrow indicator to LENS using the Up and Down buttons on the Set Up menu screen 2 Select the desired lens type by pressing the Left or Right button LENS EXPOSURE WHITE BAL DAY NIGHT 3DNR SPECIAL ADJUST RESET EXIT gt DC DC Auto Iris Lens 11 3 Press the RETURN to return to the SETUP menu Exposure This function is used to select Automatic or Manual shutter speed control 1 On the Set Up menu screen select EXPOSURE by using the Up or Down button 2 Select the desired shutter mode by pressing the Left or Right button SETUP LENS DC 4 EXPOSURE 4 WHITE BAL ATW DAY NIGHT COLOR 3DNR ON SPECIAL ADJUST RESET EXIT FLK Select FLK mode when flickering occurs caused by the unmatched frequency of electric lights 12 EXPOSURE p gt SHUTTER BRIGHTNESS SENS UP BLC D WDR RETURN 4 NOTE To produce better results with FLK do not use it in conjunction with the WDR mode in the BACKLIGHT menu Desired shutter speed can be selected by user 1 60 1 250 1 500 1 2000 1 5000 1 0000 1 100000 FLK Brightness just can operate when selected the Manual mode Option When se
4. Not responsible for printer errors We now accept Visa MasterCard AMEX at time of order placement See terms of Payment amp Credit Terms For more information contact us at Speco Technologies 200 New Highway P O Box 726 Amityville N Y 11701 0726 Tel 631 957 8700 Outside Metro N Y 1 800 645 5516 Fax 631 957 9142 or 631 957 3880 Web www specotech com 31 speco technologies 200 New Highway Amityville NY 11701 631 957 8700 1 800 645 5516 www specotech com
5. WDR digital WDR This camera provides intelligent light level control to overcome even strong backlight conditions 1 Move the arrow indicator to D WDR using the Up or Down button on the EXPOSURE menu screen 2 Select the desired feature by using the Left or Right button EXPOSURE SHUTTER 1 60 BRIGHTNESS i LOW SENS UP m BLC lt 1 4D WDR OFF RETURN A D WDR When there are simultaneous brightness amp dark image areas WDR makes both distinct and can be selected desired feature between OUTDOOR and INDOOR OFF D WDR function does not operate RETURN Select Return to save the changes in the EXPOSURE menu and retun to the SETUP menu 17 White Balance The White Balance function is used to control the on screen color 1 Move the arrow indicator to WHITE BAL on the SETUP menu screen using the Up and Down button 2 Select the desired mode by using the Left or Right button SETUP LENS DC 4 EXPOSURE 4 _AWHITE BAL ATW DAY NIGHT COLOR 3DNR ON SPECIAL ADJUST RESET EXIT There are three user selectable White Balance settings available ATW Auto Tracking White Balance Normal setting when the color temperature range is from 1 800 K to 10 500 K Ex a fluorescent lamp or outdoors AWB The White Balance is automatically adjusted in a specific environment AWC SET To obtain the best results press the SET button while the camera is focused onto whit
6. charge 1 1 2 interest per month on past due balances New orders will not be shipped while there is a past due balance We will also ship net C O D or C I A PRICING POLICY This price sheet reflects current published price All prices are subject to change without notice All items will be billed at current prices CREDIT Companies that have not established credit with our company should allow a sufficient period of time for credit approval Please be sure to provide complete credit information bank and trade references plus financial statements if available with your first order To expedite first shipment a certified or bank check with the order or use of Visa MasterCard Amex will avoid delays while we are checking credit and waiting for bank clearance FREIGHT POLICY All shipments are F O B our New York warehouse All orders totaling 2000 or more will be shipped freight allowed to any point in zones 1 2 3 4 5 and 1 2 freight allowed in zones 6 7 8 providing invoice is paid within 30 days from receipt of merchandise catalogs or exceptions from regular pricing All UPS and USPS shipments will be insured with insurance fee plus shipping and handling charges added to the invoice MINIMUM OPENING ORDER 1500 We reserve the right to refuse reorders under 250 PLEASE REQUEST CONFIRMATION OF ALL FAXED PURCHASE ORDERS WARRANTY We warranty all products to be free from any manufacturing or material defects Cameras 5 Years This war
7. e E T 20 _ 21 eCameraTitle 2er ehh hh hh hh hh 21 Effect TNT S RR RR S II QUOS alate 24 amp Motion 26 Privacy NUR a a Re eee eT ee a a ee a ee DR US 27 Sync s v EUR V V VUE c9 9 E8892 Ws WwW les Rm 28 Return ee ae CE VR UI a 28 gt Adjust 28 gt Reset E E m EE EEA E E E E E E E E ee 29 gt Exit Cem E EEEE EEEE 29 Trouble Shooting Susa ev EUR QUE E TN IR NR CAT aoe aie abe 30 Precautions Only use the camera under conditions Severe lighting change or flicker can This is one of the most important parts of the where temperatures are between cause the camera to work improperly camera Be careful not to leave 10 C and 50 C Be especially careful to provide fingerprints on the lens cover ventilation when operating under high temperatures It can cause malfunctions to occur Severe lighting change or flicker can If exposed to radioactivity the CCD cause the camera to work improperly will fai
8. m om CLR POS END 2 Choose a character in displayed range 7 0 9 using the Up Down Left and Right buttons 3 Select the desired character by pressing the SETUP button The cursor moves to the next position after character input by pressing the SETUP button 4 Repeat the above steps until the Camera ID has been created 22 NOTE In cases where the wrong Camera ID has been input Move the cursor to CLR and press SETUP button to erase characters from left to right and repeat the above steps to input the characters again 1 5 To select the position where the Camera ID should be displayed on the screen CD Move the cursor to POS and press the SET button CAMERATITLE 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ Doe Coe o z amp lo cT CLR POS END 2 Created camera ID is displayed Factory default position 598 3 Select a new position by using the four directional button Press the SET button to confirm the position 2 D EFFECT Move the cursor to D EFFECT and press the SET button to set the other image functions SPECIAL 1 CAM TITLE OFF OFF 32 D EFFECT 3 MOTION OFF OFF 4 PRIVACY OFF OFF 5 SYNC OFF OFF 6 RETURN a 2 1 FREEZE Image freezing or moving Image D EFFECT Hd FREEZE 2 MIRROR V FLIP 3 D ZOOM OFF 4 GAMMA 0 45 5 RETURN 4 24 2 2 MIRROR Flip the image horizontally on the scr
9. same physical condition as when received by us If repacking or refurbishing is requested where possible you will be charged accordingly 5 creditis issued current best quantity price or price when purchased whichever is lower will prevail BACK ORDERS Products not immediately available for shipment will be back ordered and shipped as soon as available unless we are advised to cancel back orders The original order will determine basis of shipment If the original order is freight allowed back orders will be freight allowed If the original order does not qualify for freight allowance back orders will be shipped freight collect or shipping and handling charges added to the invoice PROMOTIONAL MATERIAL Requests for nominal amounts of catalogs brochures promotional sheets etc will be supplied at no charge Requests for bulk quantities of promotional materials will be billed on a cooperative 50 50 basis CLAIMS Claims for shortage must be presented within thirty days of date of invoice Freight damage claims and freight shortages should be filed directly with the carrier within seven days of receipt of shipment No liability will be accepted for damages directly or indirectly caused from the use of our products or from any other cause Our liability shall be limited to the repair and or replacement of our products at our option of found to be defective NOTE All units priced and packaged individually unless specified
10. to select the SENSITIVITY to increase or decrease by using the Left Right button between the level 0 40 RETURN Move the arrow indicator to RETURN after complete the setup to return to SPECIAL menu 4 PRIVACY Hide an area you want to hide on the screen 4 1 When the SPECIAL menu screen is displayed press the Up and Down buttons to set to PRIVACY SPECIAL 1 CAM TITLE OFF ON 2 D EFFECT A 3 MOTION OFF 44 PRIVACY OFF ON RE 5 SYNC OFF OFF 6 RETURN H 4 2 Set up the area mode using the 4 direction buttons CD AREA SELECT You can select up to 8 MD area PRIVACY AREA SELECT AREA DISPLAY gt WIDTH BOOM HEIGHT COLOR RETURN 2 AREA DISPLAY OFF Disabled ON Activates area display 27 3 Move the arrow indicator to WIDTH to make desired width of cells to increase or decrease by using the Left Right button between the level 0 100 4 Move the arrow indicator to HEIGHT to make desired height of cells to increase or decrease by using the Left Right button between the level 0 100 5 Move the arrow indicator to the LEFT RIGHT and TOP BOTTOM to select the desired area positon by using the LEFT or RIGHT button 6 Move the arrow indicator to COLOR to select the desired color of each area cells by using the Left Right button between the 15 different color RETURN Move the arrow indicator to RETURN after complete the setup to return to SPECIAL menu
11. INSTRUCTION MANUAL 550 Line Color Dome Camera Focus Free CVC6146SCSFF speco technologies Spec clade An dl dt nstantly developing product im ments We re e the right to modify product design and spec es s without notice and without incurring any obligation Rev 6 9 10 EN CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL 15014001 FC The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance INFORMATION This equipment has been tested and found to comply with limits for a Class A digital device pursuant to part 15 of the FCC Rules amp CE Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cau
12. LC sensitivity by selecting LOW MIDDLE or HIGH DEFAULT Press the Default to back to the factory default when input the wrong data CD Move the arrow indicator to select the WIDTH of cells to increase or decrease by using the Left Right button from 0 7 cells 2 Move the arrow indicator to select the HEIGHT of cells to increase or decrease by using the Left Right button from 0 7 cells 3 Move the arrow indicator to the LEFT RIGHT and TOP BOTTOM to select the desired area positon by using the LEFT or RIGHT button 15 Move the arrow indicator to RETURN and press the Set Up button after complete the BLC area set to return to EXPOSURE menu 4 Select HSBLC High Suppress Backlight Compensation by using the Left and Right buttons then press the Set Up button to set up the desired HSBLC area and GAIN level 623i 9194 HSBLC OFF HSBLC ON LEVEL Adjust the HSBLC sensitivity by selecting between 0 8 DEFAULT Press the Default to return to the factory default when input the wrong data CD Move the arrow indicator to select the WIDTH of cells to increase or decrease by using the Left Right button from 0 7 cells 2 Move the arrow indicator to select the HEIGHT of cells to increase or decrease by using the Left Right button from 0 7 cells 3 Move the arrow indicator to the LEFT RIGHT and TOP BOTTOM to select the desired area positon by using the LEFT or RIGHT button 16 D
13. able AWC SET COLOR AUTO DELAY 0 63 S LEVEL 0 100 E LEVEL 0 100 RESET ON RANGE 0 100 Level Selectable OFF SHARPNESS RANGE 0 31 Level Adjustable BLUE RANGE 0 100 Level Adjustable RED RANGE 0 100 Level Adjustable RETURN Save the SETUP Menu and exit Special Menu ON OFF FREEZE MIRROR 0 200 GAMMA NEG IMAGE AREA SELECT AREA 1 AREA DISPLAY ON OFF LEFT RIGHT 0 100 Level Adjustable WIDTH 0 100 Level Adjustable TOP BOTTOM 0 100 Level Adjustable HEIGHT 0 100 Level Adjustable SENSITIVITY 0 40 Level Adjustable RETURN AREA SELECT AREA 1 AREA DISPLAY ON OFF LEFT RIGHT 0 100 Level Adjustable WIDTH 0 100 Level Adjustable TOP BOTTOM 0 100 Level Adjustable HEIGHT 0 100 Level Adjustable COLOR Selectable in 15 Color RETURN Menu Set Up Menu items can be selected by using the OSD buttons of the camera 1 Press the Set Up button The Set Up menu will be displayed on the monitor ALENS EXPOSURE WHITE BAL DAY NIGHT 3DNR SPECIAL ADJUST RESET EXIT 2 Move and select the required function using the Up and Down button Move the arrow indicator Up or Down to select the desired feature by pressing the Up or Down button SETUP ALENS Ra EXPOSURE WHITE BAL DAY NIGHT 3DNR SPECIAL ADJUST RESET EXIT ATW COLOR ON 10 3 Changing menu settings using the
14. d noise in a low luminance environment 1 Move the arrow indicator to 3DNR by using the Up and Down button LENS EXPOSURE WHITE BAL DAY NIGHT 2 Select whether or not to activate 3DNR by using the Left and Right buttons ON Activates 3DNR Digial noise reduction can be adjusted between 0 100 OFF Deactivates 3DNR noise is not reduced 3DNR p LEVEL RETURN Select RETURN by using the Up or Down button to return to Set Up menu 20 Special 1 When the SETUP menu screen is displayed select SPECIAL using the Up and Down buttons SETUP LENS DC 4 EXPOSURE 4 WHITE BAL ATW DAY NIGHT COLOR 3DNR ON H A SPECIAL gt ADJUST a RESET H EXIT 2 Select one of the mode using the Up and Down button SPECIAL 91 CAM TITLE OFF_ OFF 2 D EFFECT 3 OFF 4 PRIVACY OFF OFF 5 SYNC OFF OFF 6 RETURN 1 CAM TITLE When input the Camera ID is displayed on the monitor 1 1 Move the arrow indicator to CAMERA ID using the Up or Down button on the SETUP menu screen 1 2 Set to ON using the Left or Right button 21 3 Press the SETUP button CAMERA TITLE 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ Dee ce pop CS Er E CLR POS END 1 4 The CAMERA TITLE can be up to 15 alphanumeric characters in length CD Move the cursor to choose an alphanumeric character CAMERA TITLE 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ Due eo CE suf
15. e paper If the environment and or light source changes the White Balance will require re adjustment MANUAL Used for fine adjustment of White Balance Set White Balance first using ATW or AWC then change to MANUAL and press SETUP button Increase or decrease the value of R Gain Red and B Gain Blue while monitoring the color of the image WHITE BAL MANUAL BLUE RED RETURN 18 Day Night Picture can be displayed in either color or black and white 1 Select DAY NIGHT using the Up or Down button on the SETUP menu screen SETUP LENS EXPOSURE T WHITE BAL ATW ADAY COLOR 3DNR ON SPECIAL ADJUST RESET EXIT 2 Select the desired mode using the Left and Right buttons COLOR The picture is always displayed in color BW The White Balance is automatically adjusted in a specific environment AUTO The mode is automatically switches to color in normal conditions and switches to B W mode when ambient illumination is low To set the switching time or speed in AUTO mode press the SET button DAY NIGHT AUTO DELAY S LEVEL E LEVEL RETURN 19 3 Select the desired mode and set the values by using the Left or Right button DELAY The range can be adjusted between 0 63 S LEVEL The start level can be adjusted between 0 100 E LEVEL The end level can be adjusted between 0 100 3DNR 3DNR is used to reduce the level of backgroun
16. e limitations on implied warranty and consequential damages may and Speaker Selectors not apply to you This warranty gives you specific legal rights You may have other rights which vary from state to state See actual warranty statement included with Electrical Equipment Not Listed product for limitations and exclusions where applicable This limited warranty extends to Above amp Balance of Line products listed in the company s current price schedule RETURNS A written return authorization must be obtained prior to shipment Label s must appear on all packages and return must be ship prepaid Defective in warranty products will be returned prepaid Defective out of warranty products will be repaired at a nominal charge for parts and labor and returned with shipping charges added to the invoice If you require an estimate before repair please request RETURNED GOODS POLICY RETURNS SENT WITHOUT PRIOR APPROVAL WILL NOT BE ACCEPTED CREDIT WILL BE ISSUED UPON INSPECTION OF RETURNED UNITS No discounted item may be returned for credit or exchange An order of 3 00 for every 1 00 to be returned must accompany a request for return for stock adjustment There will be minimum charge of 1596 for handling and repacking where necessary Merchandise returned for credit or exchange with missing or damaged packaging or accessories will be charged accordingly Merchandise returned for repair will be shipped back repaired but in the
17. een D EFFECT 1 FREEZE 42 MIRROR V FLIP 3 D ZOOM 4 GAMMA 0 45 5 RETURN 4 V FLIP Flip the image vertically on the screen ROTATE Flip the horizontal image vertically on the screen OFF Disabled MIRROR ON MIRROR OFF 3 D ZOOM Digital zoom available range x1 x32 PAN The pan range can be controlled between 10 100 TILT The tilt range can be controlled between 10 100 D ZOOM PAN d 20 HT Sage ae Eos RETURN 4 25 2 4 GAMMA Desired gamma values can be adjusted between 0 05 1 00 2 5 RETURN Move the arrow indicator to RETURN after complete the setup to return to SPECIAL menu 3 MOTION MOTION AREA SELECT AREA AREA DISPLAY ON LEFT RIGHT eem 100 WIDTH TOP BOTTOM HEIGHT SENSITIVITY RETURN 3 1 When the special menu screen is displayed use the Up or Down botton to access the MOTION menu CD AREA SELECT Determines whether the MD area selected AREA 1 2 3 4 2 Move the arrow indicator to select the HEIGHT of cells to increase or decrease by using the Left Right button between the level 0 100 3 Move the arrow indicator to the LEFT RIGHT and TOP BOTTOM to select the desired area positon by using the LEFT or RIGHT button Move the arrow indicator to select the WIDTH of cells to increase or decrease by using the Left Right button between the level 0 100 26 5 Move the arrow indicator
18. el Adjustable D WDR Indoor Outdoor Off Motion Detection On Off 4 Zone Alarm Output Privacy On Off 8 Zone Mirror Off Mirror V Rev Rotate Freeze On Off Sharpness 0 31 Level Adjustable D amp N Selection Color BW Auto Digital Zoom On 32 Off Blemish Compensation 256 Point Even 128 Point ODD 128 Point Power DC 12V Power Consumption DC 12V 250mA Lens Focus free Al Motorized zoom Lens 2 8 10mm Operating Temperature Humidity 14 122 F RH 95 Max Storage Temperature Humidity 4 140 F RH 95 Max Dimension 5 47 W 3 82 H 5 47 D Weight 1 54 Ib General Features 3D Filtering Method of Newly Advanced DNR Function i Newly developed 3D filtering enhances Digital Noise reduction at low light levels 3D Filtering of I the Video Signal Optimises the Signal to Noise ratio giving vastly improved low light visivility and a powerful Sens Up function up to 256 times magnification 550TV Lines The combination of a Sony Super HAD CCD image sen sor and DNR DSP provides an excellent resolution of 550 TV lines D WDR Digital Wide Dynamic Range t D WDR is a powerful and ultra advanced technology that captures cleaner and superior high Resolution pic tures even where images appear dark because there is a strong back light present High Spotlight BLC Function rg High Spotlight BLC Function is Especially Effective to Read the Number Plate of the Vehicles in the Street or Parking Lot at Night Ti
19. l Sefety Instructions Precautions for use This camera should be installed by qualified personnel only There are no user serviceable parts inside Do not disassemble this camera other than to make initial adjustments Use a UL approved regulated 24 volt or 12 volt DC power supply Use appropriate low voltage power cable to prevent fire or electrical shock Please insure that your installation area can support the weight of the camera Please handle this camera carefully Do not use a strong or abrasive detergent when cleaning the camera Do not install near cooling or heating device 550 Line color dome camera Focus free Al Motorized zoom Lens 2 8 10mm CVC6146SCSFF SPECIFICATIONS ee oc ococsocsococobsossocscsocosossosccsisoisccssssssisison MODEL CVC6146SCSFF Sensor 1 3 SONY Super HAD CCD Total Pixels NTSC 811 H 508 V PAL 795 H 595 V Effective Pixels NTSC 768 H 494 V PAL 752 H 582 V Scanning System 2 1 Interlace Synchronization Internal Line Lock O S D Available Backlight BLC HSBLC Off Selectable Resolution 550TV Lines Color 600TV Lines B W S N Y signal 52dB AGC Off Weight On Min Illumination 0 00001 Lux Sens Up 256 White Balance ATW AWB Manual AWC gt SET Electronic Shutter Speed AUTO 1 50sec 1 60sec 1 120 000sec Sense Up Off Auto Selectable limit 2 256 Gain Control High Middle Low Off Selectable 3 DNR Off On 1 50 Lev
20. lected DC mode brightness will be disabled AGC AUTO GAIN CONTROL A higher gain increases brightness but also increases any noise OFF Deactivates the AGC function LOW Allows automatic gain control to LOW MIDDLE Allows automatic gain control to MIDDLE HIGH Allows automatic gain control to HIGH SENS UP At night and or in dark conditions the Sens Up mode can be selected desired value from x2 x256 Select FLK mode when flickering occurs caused by the unmatched frequency of electric lights SENS UP gt SENS UP RETURN 13 RETURN Select Return to save the changes in the EXPOSURE menu and retun to the SETUP menu NOTE Back Light BLC This camera provides intelligent light level control to overcome even strong backlight conditions 1 Move the arrow indicator to BACKLIGHT using the Up or Down button on the SETUP menu screen 2 Select the desired level by using the Left or Right button EXPOSURE SHUTTER BRIGHTNESS AGC SENS UP D WDR 4 RETURN OFF BLC function does not operate BLC Users can select and define a specific area in a scene and view the area clearly HSBLC When there are simultaneous brightness amp dark image areas HSBLC makes both distinct 14 BLC ON BLC OFF 3 Select a mode using the Left and Right buttons then press the SET button Select BLC to adjust the desired BLC area and GAIN level GAIN Adjust the B
21. me Especially Users Can Adjust and Select the Special Required Area to Observe the Target Object Under the Strong Spots of Light Exist Illumination t With an Incredibly Minimum Illumination of Amazing 0 00001 Lux can Capture Good Images Even in Extremely os E DISK SAVING Low Light Conditions and Related Noises are Significantly Reduced by the Ultra Advanced DNR Digital Noise Reduction Technology Disk Saving Effects Advanced 3DNR technology improves picture quality and saves hard drive space as less noise means much smaller file sizes much smaller than standard CCTV camera images Additional Functions t OSD On Screen Display menu with multi Language support Privacy Masking 8 zones Sens Up x256 times Digital Zoom x32 Menu Set Up DC MANUAL SHUTTER BRIGHTNESS RETURN AUTO B W COLOR EXT Refer to the next page SHARPNESS BLUE RED RETURN FACTORY DC LEVEL 0 100 Adjustable SHUTTER FLK 1 60 1 250 1 500 1 2000 1 5000 1 10000 1 100000 BRIGHTNESS 0 100 Adjustable AGC OFF LOW MIDDLE HIGH SENS UP x2 x256 Level Selectable BLC OFF BLC GAIN LOW MIDDLE HIGH DEFAULT LEFT RIGHT WIDTH TOP BOTTOM HEIGHT RTURN HSBLC LEVEL RANGE 1 8 Selectable DEFAULT LEFT RIGHT WIDTH TOP BOTTOM HEIGHT RETURN D WDR OFF INDOOR OUTDOOR RETURN ATW AWB MANUAL R Gain 0 100 Level Selectable B Gain 0 100 Level Select
22. ranty will not extend to any products which have been subjected to misuse Monitors amp IR LEDs 1 Year neglect accident or improper installation used in violation of instructions furnished by us or to units which have been repaired or altered outside of the factory This limited DVRs EZVR Series VDRs 3 Years warranty does not apply to broken cases batteries or other physically damaged parts PCPro PCL Series DVRs Upon request by the customer the company will at the customer s expense repackage merchandise in new cartons replace missing accessories and return in resalable Indoor Speakers Lifetime condition Unless requested the company will replace and return all merchandise in the Outdoor Weatherproof Speakers 5 Years packaging in which it was received This warranty is in lieu of all expressed warranties Amplifiers 5 Years expressed or implied and of all obligations or liability on our part and we p neither assume nor authorize any representative or other person to assume for us any PA Horns Microphones obligation or liability In no event shall we be liable for incidental or consequential Volume Controls damages arising from the use of the product or for any delay in the use of this product M h do to causes beyond our control Some states do not allow limitations of how long an egapnenes implied warranty lasts and or do not allow the exclusion or limitation of consequential Speaker Distribution Centers damages The abov
23. se harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense WARNING Changes or modifications not expressly approved by the manufacturer could void the user s authority to operate the equipment CAUTION To prevent electric shock and risk of fire hazards Do NOT use power sources other than those specified Do NOT expose this appliance to rain or moisture This installation should be made by a qualified service person and should conform to all local codes Contents Contents Om 3 Precautions aexua tuo uopad SEO updated rA bu V Ste rA DP ELLE RE CES 4 Sefety Instructions m 5 SPECIFICATIONS P 6 General Features cce UT 7 Menu Set Up TE 9 gt Menu Set Up 10 Lens Set Up ROSSO uS Ju ORAN dsl eet 11 gt Exposure 12 Back Light EI Le ee ee ee LL 14 n nnn 17 White Bal 49189 vaa EE ORO IOS 6 We e Qu oce ei E ah E 18 gt Day amp Night eee Cee ee AR CE ROC iol AA RR rice Reda RR E PN 19

Download Pdf Manuals

image

Related Search

Related Contents

  User Manual - B&H Photo Video  Kindermann 7444000523  Samsung 21,5" monitor HDTV LS22EM Manual de Usuario  LevelOne IES-0882    Catchment, Landform, and River Network analysis - Sisyphe  Philips HX8254/70  Sweex Broadband Router  

Copyright © All rights reserved.
Failed to retrieve file