Sony VGP-PRUX1 Operating Instructions
Contents
1. VGA D sub 15 pin 1 AV OUT compatible with NTSC PAL stereo mini jack 1 LAN connector LAN 100BASE TX 10BASE T 1 The specifications are the same as those of the personal computer you are using For details refer to the manuals provided with your personal computer Power requirements AC adapter Use the unit with an AC adapter VGP AC16V7 that is compatible with your personal computer Operating temperature 41 F to 95 F 5 C to 35 C temperature gradient less than 18 F 10 C hour Operating humidity 20 to 80 not condensed provided that humidity is less than 65 at 95 F 35 C hygrometer reading of less than 84 F 29 C Storage temperature 4 F to 140 F 20 C to 60 C temperature gradient less than 18 F 10 C hour Storage humidity 10 to 90 not condensed provided that humidity is less than 20 at 140 F 60 C hygrometer reading of less than 95 F 35 C Approx 6 0 w x 2 9 h x 4 6 d inches Approx 150 2 x 71 9 x 114 7 mm Mass Approx 8 8 oz 249 g Supplied accessories Operating instructions 1 Holder 1 When using the unit attach the holder For details on how to attach it refer to the manuals provided with your personal computer Dimensions Design and specifications are subject to change without notice Notes on use e Use the unit with an AC adapter that is compatible with your personal computer See also the manuals provided2. with your Sony personal computer for more information e To disconnect the unit completely from the main voltage unplug the AC adapter e Make sure that the socket outlet is easily accessible e Do not place the unit in locations that are Extremely hot or cold Dusty or dirty Very humid Vibrating Subject to strong magnetic fields Sandy Subject to direct sunlight Do not apply mechanical shock or drop the unit e Make sure that nothing metallic comes into contact with the metal parts of the unit If this happens a short circuit may occur and the unit may be damaged e Do not operate the unit with a damaged cord e Do not operate the unit if the unit itself has been dropped or damaged e Always keep the metal contacts clean e Do not disassemble or convert the unit e While in use it is normal for the unit to get warm e Keep the unit away from TV or AM receivers because it can disturb TV or AM reception i LINK USB PC card slot Printer DVI D and MONITOR connectors are not supplied with Limited Power Sources if those connectors are provided e When connecting or disconnecting the unit handle it carefully e When transporting the unit prevent foreign objects from causing a malfunction by using the battery pack the connector covers and the supplied slot protectors if there is any e When transporting your personal computer be sure to remove the unit first Moving your personal compute
3. 2694689 1 2 Port Replicator VGP PRUX1 Operating Instructions P S400 2 694 689 1 2 1 2006 Sony Corporation Printed in Japan Ss ONY To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture To avoid electrical shock do not open the cabinet Refer servicing to qualified personnel only e Use your product only with the AC adapter supplied with your personal computer e To disconnect it completely from the main voltage unplug the AC adapter e Make sure that the socket outlet is easily accessible For customers in the USA Owner s Record The model number and serial number are located on the bottom of your port replicator Record the serial number in the space provided here Refer to the model and serial number when you call your Sony Service Center Model No VGP PRUX1 Serial No WARNING This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur ina particular installation If this equipment does cause harmful interfere
4. nce to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference using one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Printed on 70 or more recycled paper using VOC amp Volatile Organic Compound free vegetable oil based ink http www sony net You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment Only peripherals computer input output devices terminals printers etc that comply with FCC Class B limits may be attached to this computer product Operation with non compliant peripherals is likely to result in interference to radio and television reception All cables used to connect peripherals must be shielded and grounded Operation with cables connected to peripherals that are not shielded and grounded may result in interference to radio and television reception If you have any questions about this product you can reach the Sony Customer Infomation Service Center at 1 888 476 6972 in the United States or 1 800 961 7669 in Canada or write to the Sony Customer Information Ser
5. r with the unit installed could cause the unit to fall off resulting in personal injury or damage to the unit or your personal computer e When transporting the unit detach the holder e If there are any dust or dirt particles on the port replicator connector your personal computer may not be able to detect the port replicator when it is connected even if the particles are invisible to the eye If the connection seems to be poor remove the AC power adapter and battery and wipe off the connector and the area around it on both the personal computer and port replicator Commercial air dusters are also effective for blowing away residual dust and dirt Be careful not to damage the connectors while cleaning them On cleaning Clean the unit with a soft dry cloth or a soft cloth lightly moistened with a mild detergent solution Do not use any type of solvent such as alcohol or benzine which may damage the finish
6. vice Center at 12451 Gateway Blvd Ft Meyers FL 33913 or find Sony Customer Service on the Web at http www sony com pcsupport Declaration of Conformity Trade Name SONY Model No VGP PRUX1 Responsible Party Sony Electronics Inc Address 16530 Via Esprillo San Diego CA 92127 U S A Telephone No 858 942 2230 This phone number is for FCC related matters only This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation e VAIO and NIN IO are trademarks of Sony Corporation e i LINK is a designation referring to IEEE 1394 1995 and IEEE 1394a 2000 i LINK and the i LINK logo p are trademarks of Sony Corporation Before use Before using the port replicator please read this manual thoroughly and retain it for future reference See also the manuals provided with your personal computer for more information about connecting the port replicator The Sony VGP PRUX1 port replicator is designed for Sony personal computers However it may not be used with some models Continue to next page Specifications Connectors Port replicator connector Custom connector 1 USB Type A connector 3 i LINK IEEE 1394 S400 4 pin 1 External display output MONITOR Analog RGB
Download Pdf Manuals
Related Search