Sony SNCACA2 User's Manual
Contents
1. in the literature accompanying the appliance UNPACKING Unpack carefully Electronic components can be damaged if improperly handled or dropped If an item appears to have been damaged in shipment replace it properly in its carton and notify the shipper Be sure to save The shipping carton and packaging material They are the safest material in which to make future shipments of the equipment 2 These Installation and Operating Instructions SERVICE If technical support or service is needed contact Sony at the following number TECHNICAL SUPPORT 8 15AM to 7 30PM Eastern Time 1 800 883 6817 SONY PRODUCT DISCLAIMER CAUTION This unit must be properly and securely mounted to a supporting structure capable of sustaining the weight of the bracket and camera assembly Accordingly 1 The installation should be made by a qualified installer 2 The installation should be in compliance with local codes 3 Care should be exercised to select suitable hardware to install the unit taking into account both the compostition of the mounting surface and the weight the hardware will be required to sustain Be sure to periodically examine the unit and the supporting structure to make sure that the integrity of the installation is intact Failure to comply with the foregoing could result in the unit coming loose from the support structure and falling with resultant damages or injury to anyone or anything struck by the falli2. SONY OUTDOOR HOUSING MOUNTING BRACKET Installation and Operation Instructions for the following models UNI PMA1 SNCAPM3 1 Supplied Parts 1 Mount bracket 4 Hex head bolts 3 8 16 x 1 4 Lockwasher 3 8 4 Flat washers 3 8 UNI CMA1 SNCACA2 1 Supplied Parts 1 Wall mount bracket 4 Hex head bolts 3 8 16 x 1 4 Lockwasher 3 8 4 Flat washers 3 8 1 Operation Instruction Manual 12 27 05 81 IN6564 PRECAUTIONS ON INSTALLATION 1 Both the pole mount adapter and the corner mount adapter are designed for outdoor use in conjunction with a wall mount bracket 2 The combined weight of camera lens housing pan tilt and the wall mount bracket must not exceed 75 Ibs 34 kg 3 Select a location where the combined weight of the bracket housing pan tilt and the wall mount bracket can be properly supported INSTALLING THE POLE MOUNT ADAPTER INSTALLING THE CORNER MOUNT ADAPTER UNI PMA1 or SNCAPM3 UNI CMA1 or SNCACA2 GENERAL INSTRUCTIONS Mount the bracket assembly to the selected Tools Required 100 Flat Head Screwdriver corner location using appropriate hardware not Phillips Head Screwdriver provided 1 Mount the bracket assembly to the pole using 2 Combine the wall mount bracket with the corner metal straps not provided Place the straps mount adapter and securely attach the four through the slots on the UN PMA1 or SNCAPM3 Pe ed Pelee GE WO NAR AnA TA An and then around th
3. e pole Tighten straps provided into the 3 8 inserts on the adapter 2 Combine the wall mount bracket with the pole mount adapter and securely attach the four hex head bolts lock washers and flat washers provided into the 3 8 inserts on the adapter Figure 2 Figure 1 i 2 62 A L 88 h 4o 4 4 3 8 16 inserts 2X 75 j 4 438 DIA holes A i i3 a 3 82 4 3 8 16 inserts T x 75 i 38 gt d a 1 00 ia WJ 2 00 E O 5 50 t ni s O 1 00 7 25 de lh 1 00 2 00 in 11 87 4f UNI PMA1 SNCAPM3 Dimensions UNI CMA1 SNCACA2 Dimensions IMPORTANT SAFEGUARDS Read Instructions All the safety and operating instructions should be read before the unit is operated 2 Retain Instructions The safety and operating instructions should be retained for future reference 3 Heed Warnings All warnings on the unit and in the operating instructions should be adhered to 4 Follow Instructions All operating and user instructions should be followed 5 Electrical Connections Only a qualified electrician should make electrical connections 6 Attachments Do not use attachments not recommended by the product manufacturer as they may cause hazards 7 Cable Runs All cable runs must be within permissible distance 8 Mounting This unit must b
4. e properly and securely mounted to a supporting structure capable of sustaining the weight of the unit Accordingly a The installation should be made by a qualified installer b The installation should be in compliance with local codes c Care should be exercised to select suitable hardware to install the unit taking into account both the composition of the mounting surface and the weight of the unit Be sure to periodically examine the unit and the supporting structure to make sure that the integrity of the installation is intact Failure to comply with the foregoing could result in the unit separating from the support structure and falling with resultant damages or injury to anyone or anything struck by the falling unit 2005 Sony Corporation SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non insulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to presence of important operating and maintenance servicing instructions
5. ng unit 2005 by Sony Corporation
Download Pdf Manuals
Related Search