Sony HDR-AZ1VR/W Operating Guide
Contents
1. A smartphone with PlayMemories Mobile installed Press the Wi Fi button to switch the Wi Fi settings of the camera when connecting to a separately sold Live View Remote or a smartphone e Press the Wi Fi button of the camera to switch the screen indicator of the display panel as described below Icons of available functions will be displayed an LIVE Switch on the Wi Fi Single connection default Connect to multiple cameras Multi connection Perform Live streaming Live connection Switch off the Wi Fi OFF Refer to the operating guide of Live View Remote as well Connecting Live View Remote to the camera Single connection Turn on the power of the camera to set the Wi Fi settings to the single connection default Turn on the power of Live View Remote to set the network settings connection mode of the remote control to the single connection 3 Select the SSID of the camera using Live View Remote For details on operation refer to the operating guide of Live View Remote 4 Press and hold the Wi Fi button of the camera after you hear the camera beep After you hear the camera beep again The camera images will be displayed in the LCD screen of Live View Remote the REC lamp of Live View Remote lights up in blue Notes e A text string with DIRECT abbreviated from the SSID of the camera will be displayed on the LCD screen of Live View Remote e Check that the Wi Fi setti2. For the notes on use of the waterproof case refer to the instruction manual on the web Note on optional accessories Genuine Sony accessories may not be available in some countries regions Security in the use of wireless LAN devices e To avoid hacking access by malicious third parties and other vulnerabilities confirm that the wireless LAN is always secure e It is very important to set up security on a wireless LAN e If a problem occurs due to inadequate security measures or due to foreseeable circumstances Sony Corporation is not responsible for any resulting damage Note on wireless network function e We assume no responsibility whatsoever for any damage caused by unauthorized access to or unauthorized use of destinations loaded on the camera resulting from loss or theft Signal format HDTV Power requirements Rechargeable battery pack 3 7 V NP BY1 Multi Micro USB terminal 5 0 V USB charging DC 5 0 V 500 mA Rechargeable battery pack NP BY1 Maximum charge voltage DC 4 2 V Maximum charge current 975 mA Splash proof IPX4 based on our tests Operating temperature 5 C to 40 C 23 F to 104 F Storage temperature 20 C to 60 C 4 F to 140 F Dimensions Approx 24 2 mm x 36 0 mm x 74 0 mm 31 32 in x 17 16 in x 3 in W H D excluding protrusions and excluding the supplied waterproof case Mass Approx 48 g 1 7 oz main body only Total weight in use Approx 63 g 2 2
3. Android 4 0 or later is required iOS Search for PlayMemories Mobile on App Store then install it Available on the iPhone 0 App Store e When using iOS One touch functions NFC are not available Notes e Update PlayMemories Mobile to the latest version if you have already installed it on your smartphone e The Wi Fi function described in this Operating Guide is not guaranteed to work with all smartphones and tablets e The operation methods and display screens for the application are subject to change without notice by future upgrades e For more information about PlayMemories Mobile refer to the following website http www sony net pmm Connecting Android Turn on the power of this camera to set the Wi Fi setting to the single connection default Start PlayMemories Mobile on the smartphone Select the SSID as printed on the sticker attached to the back side of the battery pack cover Input the password on the same sticker First time only Android Supporting NFC Touch the N mark of the smartphone against the M amp M N mark of the camera When PlayMemories Mobile starts settings are automatically applied to establish Wi Fi connection iPhone Turn on the power of this camera to set the Wi Fi setting to the single connection default Open Settings on the smartphone Select Wi Fi on the smartphone Select the SSID as printed on the sticke
4. sold separately See the instruction manual supplied with RM LVR1 or the handbook PDF The instruction manual is released also on the website Access the Sony support page http www sony net Sonylnfo Support Select your country or region Search and download RM LVR1 on Sony eSupport 4547916110 2014 Sony Corporation Printed in China http www sony net Checking the bundled items Camera 1 Micro USB cable 1 Rechargeable battery pack NP BY1 1 Waterproof Case SPK AZ1 1 Attachment Buckle 1 Flat Adhesive Mount 1 Curved Adhesive Mount 1 Tripod Adaptor 1 Set of printed documentation Parts and controls 1 POWER lamp CHG Charge lamp REC HOLD switch REC Movie Photo button REC lamp LIVE lamp Lens Microphones Tripod adaptor attachment hole 8 N mark NFC Near Field Communication 9 Speaker 10 IR remote receiver 11 Display panel 12 ON OFF button 13 Wi Fi button 14 Connector cover USB 15 Multi Micro USB terminal Supports Micro USB compatible devices RESET button Memory card insertion slot 18 Memory card cover 19 REC Access lamp 20 Battery cover lock lever 21 Battery ejection sheet 22 Battery storage area 23 Battery pack cover 24 SSID label NI Od 0 A 0 N o oa i F D l co
5. 2 SONY 7669 The number below is for the FCC related matters only Regulatory Information Declaration of Conformity Trade Name SONY Model No HDR AZ1 Responsible Party Sony Electronics Inc Address 16530 Via Esprillo San Diego CA 92127 U S A Telephone No 858 942 2230 This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This equipment must not be co located or operated in conjunction with any other antenna or transmitter CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment Note This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur ina particular installation If this equipment does cause harmful interference to radio or television reception whic
6. 4 547 916 11 1 SONY Digital HD Video Camera Recorder Operating Guide This manual describes the basic operation that can be performed with HDR AZ1 only To use the camera in a variety of ways you need a smartphone or tablet supporting a dedicated application PlayMemories Mobile or a separately sold Live View Remote For details refer to Read this first on this manual You can download the movie editing PC software Action Cam Movie Creator limited to this device from the following URL http www sony net actioncam support See how to use the camera and software at this URL e Use an SDXC card faster than Class10 when recording movies in XAVC S m mgs XAVC umumion P Memory STICK XC HDR AZ1 Owner s Record The model and serial numbers are located on the side Record the serial number in the space provided below Refer to these numbers whenever you call your Sony dealer regarding this product Model No HDR AZ1 Serial No Read this first This manual describes the basic operation that can be performed with HDR AZ1 only To use the camera in a variety of ways you need a smartphone or tablet supporting a dedicated application PlayMemories Mobile or a separately sold Live View Remote e Installing how to use PlayMemories Mobile See the following URL m E http www sony net pmm See also Connecting to the smartphone on this manual e How to use Live View Remote RM LVR1
7. co Charging the battery pack 1 Open the cover Slide the lock lever to the OPEN side Open the cover from lt 4 2 Insert the battery pack Align the lt mark of the battery with that of the camera ejection sheet and insert the battery pack Insert the battery pack aligning the lt mark of the battery with that of the camera and orienting its printed side as illustrated Securely close the cover and slide the lock lever to the LOCK position Make sure that the yellow mark on the lock lever is not visible and the cover is securely closed Double check that the battery ejection sheet is not pinched in the cover or sticking out of the cover If any foreign matter such as sand gets inside the cover the sealing gasket may be scratched and may result in water entering the inside of the camera step 1 in opposite order To eject the battery pull the battery ejection sheet There are chances that the battery may not be ejected if the battery ejection sheet is stored under the battery Additionally this may cause water leakage 3 Check that the power of the camera is OFF To turn off the camera press the ON OFF button until the POWER lamp turns off Connect the camera to an activated computer with the micro USB cable supplied Micro USB cable Inserting a memory card microSD card microSDHC card microSDXC card Memory Stick Micro Mar
8. h can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help The supplied interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules For Customers in Canada This device complies with Industry Canada licence exempt RSS standard s Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device For Customers in Europe Notice for the customers in the countries applying EU Directives Manufacturer Sony Corporation 1 7 1 Konan Minato ku Tokyo 108 0075 Japan For EU product compliance Sony Deutschland GmbH Hedelfinger Strasse 61 70327 Stuttgart Germany CE Hereby Sony Corporation declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC For details please access the following URL http www compliance sony de Notice If sta
9. k2 media Printed side Terminal side Insert the memory card properly confirming each side is facing the correct direction Use an SDXC card faster than Class10 when recording movies in XAVC S Notes e Make sure that the connector cover USB the memory card cover and the battery pack cover are securely closed and any foreign matters are not stuck in the cover before use Otherwise this may cause water leakage Attach accessories to the camera as required For details on the bundled accessories refer to the following http rd1 sony net help cam 1415 h_zz 1 Press the ON OFF button to power on 2 Slide the REC HOLD switch and release REC HOLD If REC HOLD is released proceed to step 3 3 Press the REC button to start recording To stop recording Press the REC button again Notes e Images cannot be played on the camera To play back images you need a smartphone or tablet supporting a dedicated application PlayMemories Mobile e The camera cannot play back audio e During periods of extended shooting camera temperature may rise to a point where shooting stops automatically e The shooting mode setting is set to the Movie mode by default Change the shooting settings by using the followings for PHOTO INTVL recording For more information about the operation refer to the instruction manual on the website A separately sold Live View Remote RM LVR1 Software version 2 00 or later
10. ly cold or hot places that exceed this range is not recommended Notes on long time recording e Camera body and battery may get warm with use this is normal e Avoid using the camera for a long time when holding the camera in your hand or when it is directly touching your skin It is recommended that you use the supplied adhesive mounts or waterproof case or optional mount accessories e Under high ambient temperatures the temperature of the camera rises quickly e Leave the camera alone for 10 minutes or longer to allow the temperature inside the camera to decrease to a safe level e When the temperature of the camera rises the image quality may deteriorate It is recommended that you wait until the temperature of the camera drops before continuing to shoot images On the overheat protection Depending on the camera and battery temperature you may be unable to record movies or the power may turn off automatically to protect the camera A message will be displayed on the screen of Live View Remote before the power turns off or you can no longer record movies In this case leave the power off and wait until the camera and battery temperature goes down If you turn on the power without letting the camera and battery cool enough the power may turn off again or you may be unable to record movies About dust proof and waterproof performance e The camera is dust proof and waterproof Depth of water 5 m 16 feet 30 minutes continuously
11. ng has been set to the single connection when the SSID is not displayed Connecting Live View Remote to multiple cameras up to 5 cameras Multi connection 1 Turn on the power of the cameras to set the Wi Fi setting to the multi connection 2 Turn on the power of Live View Remote 3 Set the network settings connection mode of Live View Remote to the multi connection Display the camera registration screen on the LCD screen of Live View Remote and shift to the registration standby mode For details on operation refer to the operating guide of Live View Remote D Press and hold the Wi Fi button of the camera After you hear the camera beep the camera images will be displayed in the LCD screen of the remote control and the REC lamp of Live View Remote lights up in blue Repeat steps 3 to 5 to connect to the cameras continuously Notes e Register cameras before connection standby mode of the Live View Remote is cancelled e The WPS method is used for connecting the Live View Remote to multiple cameras If there is another device using the WPS method in the vicinity of the cameras the registration may fail If the registration fails reconnect by performing each step again Installing PlayMemories Mobile on your smartphone m E PlayMemories wy y Mobile EF Android OS Search for PlayMemories Mobile on Google Play then install it Google play e When using One touch functions NFC
12. oz including the battery pack excluding the supplied waterproof case e This camera is splash proof The camera body has IPX4 splash proof performance based on our tests e Design and specifications are subject to change without notice for future upgrades On trademarks e Memory Stick and amp are trademarks or registered trademarks of Sony Corporation e Mac is a registered trademark of Apple Inc in the United States and other countries e iOS is a registered trademark or trademark of Cisco Systems Inc e Android and Google Play are trademarks of Google Inc e iPhone is a trademark or a registered trademark of Apple Inc e Wi Fi the Wi Fi logo Wi Fi PROTECTED SET UP are registered trademarks of the Wi Fi Alliance e The N Mark is a trademark or registered trademark of NFC Forum Inc in the United States and in other countries e Adobe the Adobe logo and Adobe Acrobat are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and or other countries e microSDXC logo is a trademark of SD 3C LLC In addition system and product names used in this manual are in general trademarks or registered trademarks of their respective developers or manufacturers However the or marks may not be described in this manual WARNING To reduce the risk of fire or electric shock 1 do not expose the unit to rain or moisture 2 do not place objects filled with liquids such as va
13. r attached to the back side of the battery pack cover Input the password on the same sticker First time only Confirm that the SSID of the camera is displayed on the smartphone Return to the Home screen then start PlayMemories Mobile a T O gt OO fe O gt a O gt RY O 5 Checking without a sticker If the sticker is peeled off or becomes difficult to be read you can recall your user ID and password by the following procedure Insert a charged battery pack into the camera Connect the camera to a computer with the micro USB cable supplied Press the ON OFF button to turn on the power Display Computer PMHOME INFO WIFI_INF TXT on your computer then confirm your ID and password You can perform the live distribution of movies to an online video sharing site such as USTREAM by using a smartphone that can tether to a camera or a Wi Fi router in the live connection For details on operation refer to Live streaming with the camera in the instruction manual on the website http rd1 sony net help cam 1410 h_zz Wi Fi function e Use the camera in accordance with the regulations of the area of use e You cannot use the Wi Fi function of the camera underwater On operating temperatures The camera is designed for use in temperatures between 5 C and 40 C 23 F and 104 F Shooting in extreme
14. re that the battery and the electrical and electronic equipment will be treated properly hand over these products at end of life to the applicable collection point for the recycling of electrical and electronic equipment For all other batteries please view the section on how to remove the battery from the product safely Hand the battery over to the applicable collection point for the recycling of waste batteries For more detailed information about recycling of this product or battery please contact your local Civic Office your household waste disposal service or the shop where you purchased the product or battery For Customers in Singapore Complies with IDA Standards DB00353
15. ses on the apparatus Do not expose the batteries to excessive heat such as sunshine fire or the like CAUTION Battery pack If the battery pack is mishandled the battery pack can burst cause a fire or even chemical burns Observe the following cautions e Do not disassemble e Do not crush and do not expose the battery pack to any shock or force such as hammering dropping or stepping on it e Do not short circuit and do not allow metal objects to come into contact with the battery terminals e Do not expose to high temperature above 60 C 140 F such as in direct sunlight or in a car parked in the sun e Do not incinerate or dispose of in fire e Do not handle damaged or leaking lithium ion batteries e Be sure to charge the battery pack using a genuine Sony battery charger or a device that can charge the battery pack e Keep the battery pack out of the reach of small children e Keep the battery pack dry e Replace only with the same or equivalent type recommended by Sony e Dispose of used battery packs promptly as described in the instructions AC Adaptor Use the nearby wall outlet wall socket when using the AC Adaptor Disconnect the AC Adaptor from the wall outlet wall socket immediately if any malfunction occurs while using the apparatus Battery charger Even when the CHARGE lamp of this battery charger is off the power is not disconnected If any trouble occurs while this unit is in use unplug it from
16. the wall outlet wall socket to disconnect the power Even if your camera is turned off AC power source mains is still supplied to it while connected to the wall outlet wall socket via the AC Adaptor For customers in the U S A and CANADA RECYCLING LITHIUM ION BATTERIES Lithium lon batteries are recyclable You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you For more information regarding recycling of rechargeable batteries call toll free 1 800 822 8837 or visit http www call2recycle org Caution Do not handle damaged or leaking Lithium lon batteries Battery pack This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation CAN ICES 3 B NMB 3 B This equipment complies with FCC IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency RF Exposure Guidelines and RSS 102 of the IC radio frequency RF Exposure rules This equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption ratio SAR For Customers in the USA If you have any questions about this product you may call Sony Customer Information Center 1 800 22
17. tic electricity or electromagnetism causes data transfer to discontinue midway fail restart the application or disconnect and connect the communication cable USB etc again This product has been tested and found compliant with the limits set out in the EMC regulation for using connection cables shorter than 3 meters 9 8 feet The electromagnetic fields at the specific frequencies may influence the picture and sound of this unit Disposal of waste batteries and electrical and electronic equipment applicable in the European Union and other European countries with separate collection systems This symbol on the product the battery or on the packaging indicates that the product and the battery shall not be treated as household waste On certain batteries this symbol might be used in combination with a chemical symbol The chemical symbols for mercury Hg or lead Pb are added if the battery contains more than 0 0005 mercury or 0 004 lead By ensuring these products and batteries are disposed of correctly you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling The recycling of the materials will help to conserve natural resources In case of products that for safety performance or data integrity reasons require a permanent connection with an incorporated battery this battery should be replaced by qualified service staff only To ensu
Download Pdf Manuals
Related Search