Home
Sony CDX-C7500 User's Manual
Contents
1. repeatedly to select desired setting TE JE DI AI T DITIT Lo IHIEL Each time you press gt or O the cut off frequency in the display changes as follows LPF OFF lt gt LPF 80 HZ lt gt LPF 120 HZ 4 Press SHIFT When the frequency setting is complete the display returns to the normal playback mode With Optional Equipment CD MD Unit This unit can control a maximum of seven external CD MD units in this configuration CD unit maximum of five MD unit maximum of five Any combination up to seven will work If you connect an optional CD unit with the CD TEXT function the CD TEXT information will appear in the display when you play a CD TEXT disc Playing a CD or MD 1 Press repeatedly to select CD or MD 2 Press until the desired unit appears CD MD playback starts When a CD MD unit is connected all the tracks play from the beginning Changing the display item Each time you press during CD CD TEXT or MD playback the item changes as follows v Track number Elapsed playback time v Disc name Artist name v Track name v Clock 1 f you have not labelled the disc or if there is no disc name prerecorded on the MD NO NAME appearsin the display 2 If you play a CD TEXT disc the artist name appears in the display after the disc name Only for CD TEXT discs with the artist name 3 If the track name of a CD TEXT disc or
2. Soluci n Inserte el cargador con discos en la unidad de CD MD NO DISC No ha insertado ning n disco en la unidad Inserte los discos en la unidad de CD MD NG DISCS El CD MD no se reproduce debido a alg n problema Inserte otro CD MD ERROR Un CD est sucio o insertado al rev s Limpie el CD o ins rtelo correctamente No es posible reproducir un MD debido a alg n problema Inserte otro MD BLANK No ha grabado ning n tema en el MD Reproduzca un MD con temas grabados RESET No es posible emplear la unidad de CD MD debido a alg n problema Pulse el bot n de restauraci n de la unidad NO READY La tapa de la unidad de minidiscos est abierta o los minidiscos no se han insertado correctamente Cierre la tapa o inserte los minidiscos correctamente HI TEMP La temperatura ambiente es superior a 50 C Espere hasta que la temperatura descienda por debajo de 50 C 1 Si se produce un error durante la reproducci n de un MD o de un CD el n mero del MD o del CD no aparecer en el visor 2 El visor mostrar el n mero del disco que causa el error Si el problema no se soluciona con las sugerencias anteriormente enumeradas p ngase en contacto con el proveedor Sony m s pr ximo Sony Corporation Printed in Korea
3. No es posible mostrar los t tulos de tema durante la reproducci n de MD y discos CD TEXT e Si no hay discos en el cargador el visor mostrar NO DISC e Si no se ha asignado ning n nombre personalizado a un disco el visor mostrar Mo e Si la unidad no ha le do la informaci n de discos el visor mostrar NOT READ Para introdudr el disco pulse en primer lugar el bot n num rico y a continuaci n seleccione el disco que no se ha introducido No es posible mostrar ciertas letras durante la reproducci n de MD o CD TEXT 20 Selecci n de temas espec ficos para su reproducci n Funci n de banco Unidad de CD con funci n de archivo personalizado Si asigna t tulos a los discos podr programar la unidad para que omita temas o reproduzca s lo los temas deseados 1 Reproduzca el disco pulse y a continuaci n PLAY MODE durante dos segundos Modo de edici n de banco Pug oe K EEI 1 m n _ to ff Leet PLAY MODE ENTER Nota Si no ha asignado t tulos a los discos el modo de edici n de banco no aparecer Para volver al modo de reproducci n normal pulse SHIFT 2 Desplace el control SEEK AMS hacia arriba o abajo para seleccionar el n mero de tema que desee omitir y pulse 6 ENTER row sc TRACK HE T D T L T o JN 1 NAS PLAY MODE ENTER La indicaci n cambia de PLAY a SKIP Si desea volver al modo PLAY vuelva a pulsar
4. Para volver al modo de reproducci n normal seleccione REP OFF en el anterior paso 2 Reproducci n de temas en orden aleatorio Reproducci n aleatoria 1 Pulse durante la reproducci n 2 Pulse SHUF varias veces hasta que aparezca SHUF 1 SETUP_ PLAY MODE REP SHUF Se inicia la reproducci n en orden aleatorio 3 Pulse SHIFD Para volver al modo de reproducci n normal seleccione SHUF OFF en el anterior paso 2 Radio Memorizaci n autom tica de emisoras Memorizaci n de la mejor sinton a BTM Esta unidad selecciona las emisoras de se al m s intensa y las memoriza por orden de frecuencia Es posible almacenar hasta 10 emisoras de cada banda FM1 FM2 y AM Precauci n Durante la conducci n utilice la memorizaci n de la mejor sinton a para evitar accidentes 1 Pulse SOURCE varias veces para seleccionar el sintonizador Cada vez que pulse SOURCE la fuente cambiar de la siguiente forma gt TUNER gt CD gt MD Si el equipo opcional correspondiente no est conectado el elemento no aparecera 2 Pulse varias veces para seleccionar la banda Cada vez que pulse MODE la banda cambiar de la siguiente forma gt FM1 gt FM2 gt AM 3 Pulse y a continuaci n PLAY MODE varias veces hasta que aparezca B T M 4 Pulse gt La unidad almacenar las emisoras en los botones num ricos por orden
5. check the connections first If everything is in order check the fuse e If no sound comes from the speakers of 2 speaker systems set the fader control to the centre position e If your car is equipped with a power aerial it will extend automatically while the unit is operating e Connecting this unit may cause some car battery wear when your car has no ACC accessory position on the ignition key switch If you have any questions or problems concerning your unit that are not covered in this manual please consult your nearest Sony dealer Notes on handling CDs A dirty or defective disc may cause sound dropouts while playing To enjoy optimum sound handle the disc by its edge To keep the disc clean do not touch the surface Do not stick paper or tape on the labelled surface continue to next page gt 21 Do not expose the discs to direct sunlight or heat sources such as hot air ducts or leave them in a car parked in direct sunlight where there can be a considerable rise in temperature inside the car Before playing clean the discs with an optional cleaning cloth Wipe each disc from the centre out Do not use solvents such as benzine thinner commercially available cleaners or antistatic spray intended for analog discs Note on moisture condensation On a rainy day or in a very damp area moisture may condense on the lenses inside the CD player Should this occur the unit will not operate properl
6. gt AM 3 Press SHIFT then press 4 PLAY MODE repeatedly until B T M appears 4 Press gt The unit stores stations in the order of their frequencies on the number buttons A beep sounds when the setting is stored 5 Press SHIFD Notes e The unit does not store stations with weak signals If only a few stations can be received some number buttons will retain their former setting e When a number is indicated in the display the unit starts storing stations from the one currently displayed e If a CD isnot in the unit only the tuner band appears even if you press SOURCE 10 Memorising only the desired stations You can preset up to 20 FM stations 10 each for FM1 and 2 up to 10 AM stations in the order of your choice 1 press repeatedly to select the tuner 2 Press repeatedly to select the band 3 Push the SEEK AMS control up or down to tune in the station that you want to store on the number button 4 Press and hold the desired number button G to Go until MEM appears The number button indication appears in the display Note If you try to store another station on the same number button the previously stored station will be erased Receiving the memorised stations 1 Press repeatedly to select the tuner 2 Press repeatedly to select the band 3 Press the number button C to 10 gt on which the desired station is stored If you cannot tune in
7. 10 17 19 2 eject button located on the front side of the unit behind the front panel 8 SOURCE source select button 8 10 16 17 19 Dial volume subw oofer volume bass treble left right rear front control 7 11 12 14 19 SOUND button 14 Display window DSPL display mode change button 8 11 12 17 19 OPEN button 6 8 22 LIST button Station Memo 11 12 Disc Memo 19 List up 12 20 CDX C7500 Reset button located on the front side of the unit behind the front panel 6 OFF button 6 8 SHIFT button PLAY MODE 10 11 20 21 REP 9 18 SET UP 7 9 15 16 17 18 SHUF 9 18 Frequency Select switch located on the bottom of the unit See Frequency Select Switch in the Installation Connections manual During radio reception Number buttons 10 During CD MD playback Direct disc selection buttons 18 20 Receptor for the optional wireless remote D BASS control 15 Optional wireless remote RM X47 The corresponding buttons of the wireless remote control the same functions as those on this unit OFF button SEEK AMS button O buttons El ATT button SOUND SEL button J DSPL button PRESET DISC button You cannot perform manual search or manual tuning with the wireless remote El SOURCE button El MODE DIR button Getting Started Resetting the unit Before operating the unit for the first time or after replacing the car battery you must r
8. 6 ENTER 3 Repita el paso 2 para definir el modo PLAY o SKIP en todos los temas 4 Pulse PLAY MODE durante dos segundos La unidad vuelve al modo normal de reproducci n de CD 5 Pulse SHF Notas e Es posible definir los modos PLAY o SKIP para un m ximo de 24 temas e No es posible definir el modo SKIP para todos lostemas de un CD Reproducci n s lo de temas espec ficos Es posible seleccionar e BANK ON para reproducir los temas con el ajuste PLAY e BANK INV Inverso para reproducir los temas con el ajuste SKIP 1 Durante la reproducci n pulse y a continuaci n 4 PLAY MODE varias veces hasta que aparezca BANK 2 Pulse gt varias veces hasta que aparezca el ajuste que desee m gt BANK ON gt BANK INV gt BANK OFF rai BANK Ae THIN o AUP PLAY MODE gt La reproducci n se inicia a partir del tema siguiente al actual 3 Pulse SHIFT Para volver al modo normal de reproducci n seleccione BANK OFF en el anterior paso 2 Informacion complementaria Precauciones e Si aparca el autom vil bajo la luz solar directa y se produce un considerable aumento de temperatura en su interior deje que la unidad se enfr e antes de utilizarla e Si la unidad no recibe alimentaci n compruebe las conexiones en primer lugar Si todo est en orden examine el fusible eSi los altavoces no emite
9. Rotate the control and release it to e Locate a specific track on a disc Rotate and hold the control until you locate the specific point in a track then release it to SOUND start playback MODE e Tune in stations automatically Rotate and ust hold the control to find a specific station By pushing in and rotating the Usi ng the rotary control the PRESET DISC control commander On The rotary commander works by pressing A O buttons and or rotating controls IZ You can also control optional CD or MD units with the rotary commander By pressing buttons the SOURCE and MODE buttons Push in and rotate the control to e Receive the stations memorised on the number buttons e Change the disc 13 Other operations Rotate the VOL control to adjust the volume Press to attenuate the sound Press to turn off the unit Press to adjust the volume and sound menu Press to display the memorised names Changing the operative direction The operative direction of controls is factory set as shown below To increase To decrease If you need to mount the rotary commander on the right hand side of the steering column you can reverse the operative direction Press for two seconds while pushing the VOL control Tip You can also change the operative direction of these controls with the unit page 15 14 Adjusting the sound characteristics You can adjust the bass treble b
10. select _ under bar O Press gt after locating the desired character The flashing cursor moves to the next If you press 2 4 the flashing cursor moves to the left Repeat steps O and O to enter the entire name 3 To return to normal CD playback mode press for two seconds Tip To erase or correct a name enter _ for each character under bar Displaying the disc memo Press during CD or CD TEXT disc playback Each time you press during CD or CD TEXT disc playback the item changes as follows v Track number Elapsed playback time v Disc memo name v Track name v Clock If you connect an optional CD unit with the CD TEXT function the CD TEXT information will appear in the display when you play a CD TEXT disc Erasing the disc memo 1 2 Press repeatedly to select CD Press repeatedly to select the CD unit 3 Press for two seconds Press for two seconds 5 Rotate the dial to select the name you want to erase Press 6 ENTER for two seconds The name is erased Repeat steps 5 and 6 if you want to erase other names Press for two seconds The unit returns to normal CD playback mode Note When a personalized label is erased the original CD TEXT information will appear in the display 19 Locating a disc by name List up For a CD unit with the custom file function or an MD unit You can use this fun
11. FF Repeat Play starts 3 Press SHIFT To return to normal playback mode select REP OFF in step 2 above Playing tracks in random order shuffle Play You can select e SHUF 1 to play the tracks on the current disc in random order e SHUF 2 to play the tracks in the current unit in random order e SHUF ALL to play all the tracks in all the units in random order 1 During playback press SHIFT 2 Press SHUF repeatedly until the desired setting appears gt SHUF 1 gt SHUF 2 SHUF OFF 4 SHUF ALL lt __ Shuffle Play starts SHUF ALL is available for CD changer s only 3 Press SHIFT To return to normal playback mode select SHUF OFF in step 2 above Labelling a CD Disc Memo For a CD unit with the custom file function You can label each disc with a personalised name You can enter up to eight characters for a disc If you label a CD you can locate the disc by name page 20 and select the specific tracks for playback page 20 1 Play the CD and press fortwo seconds 2 Enter the characters O Rotate the dial clockwise to select the desired characters A gt B gt C gt Z gt 0 gt 1 gt 2 gt 9 gt gt gt t gt olo gt gt gt o lt gt gt _ ro E HE e If you rotate the dial counterclockwise the characters will appear in reverse order If you want to put a blank space between characters
12. SOURCE varias veces para seleccionar CD 2 Pulse varias veces para seleccionar la unidad de CD 3 Pulse durante dos segundos 4 Pulse durante dos segundos 5 Gire el dial para seleccionar el t tulo que desee borrar 6 Pulse 6 ENTER durante dos segundos El t tulo se borrar Repita los pasos 5 y 6 para borrar otros t tulos 7 Pulse durante dos segundos La unidad vuelve al modo normal de reproducci n de CD Nota Si se borra el nombre personalizado el visor mostrar la informaci n CD TEXT original 19 Localizaci n de discos mediante el nombre Funci n de listado unidad de CD con funci n de archivo personalizado o una unidad de MD Esta funci n puede utilizarse con discos a los que se ha asignado un t tulo personalizado Para obtener m s informaci n sobre los t tulos de disco consulte Asignaci n de t tulos a los discos compactos p gina 19 1 Pulse st El nombre asignado al disco actualmente en reproducci n aparecer en el visor Si asigna un memorando de discos a un disco CD TEXT prevalecer sobre la informaci n original CD TEXT 2 Pulse varias veces hasta encontrar el disco deseado 3 Pulse ENTER para reproducir el disco Notas e Una vez que el t tulo del disco se ha mostrado durante cinco segundos en el visor vuelve a aparecer la indicaci n del modo de reproducci n normal Para que desaparezcan lasindicaciones del visor pulse DSPL
13. a preset station Push and release the SEEK AMS control up or down to search for the station automatic tuning Scanning stops when the unit receives a station Push the SEEK AMS control up or down repeatedly until the desired station is received Note If the automatic tuning stops too frequently press SHIFT then press 4 PLAY MODE repeatedly until LOCAL local seek mode is displayed Then press gt to select LOCAL ON Press SHIFT Only the stations with relatively strong signals will be tuned in Tip If you know the frequency of the station you want to listen to push the SEEK AMS control up or down and hold until the desired frequency appears manual tuning If FM stereo reception is poor Monaural Mode 1 During radio reception press SHIFT then press 4 PLAY MODE repeatedly until MONO appears 2 Press gt repeatedly until MONO ON appears The sound improves but becomes monaural ST disappears 3 Press GHIFT To return to normal playback mode select MONO OFF in step 2 above Changing the display item Each time you press DSPL the item changes as follows Frequency gt Clock After you select the desired item the display will automatically change to the Motion Display mode after a few seconds In the Motion Display mode all the above items are scrolled in the display one by one in order Tip The Motion Display mode can
14. agujas del reloj para seleccionar los caracteres que desee A gt B gt C gt Z gt 0 gt 1l gt 2 gt 2 9 gt gt gt gt gt ol gt gt gt lt gt gt LIE E A AE Si gira el dial en el sentido contrario a las agujas del reloj los caracteres aparecer n en orden inverso Si desea introducir un espacio en blanco entre caracteres seleccione _ barra inferior O Pulse gt despu s de localizar el car cter que desee El cursor parpadeante se desplaza al espacio siguiente gt Disc i ps ME T wry bE ist ey ca ETA tm Si pulsa 2 el cursor parpadeante se desplaza al lado izquierdo Repita los pasos y O hasta haber introducido todo el nombre 3 Para volver al modo normal de reproducci n de CD pulse durante dos segundos Consejo Para borrar o corregir un t tulo introduzca barra inferior por cada car cter uo Visualizaci n del memorando de discos Pulse durante la reproducci n de un CD o de un disco CD TEXT Cada vez que pulse durante la reproducci n de un CD o de un disco CD TEXT la indicaci n cambia de la siguiente forma v N mero de tema Tiempo de reproducci n transcurrido v T tulo de disco v T tulo del tema v Reloj Si conecta una unidad opcional de CD con la funci n CD TEXT el visor mostrar la informaci n CD TEXT al reproducir discos CD TEXT Borrado del memorando de discos 1 Pulse
15. alcohol No aplique demasiada presi n ya que los conectores podr an da arse Unidad principal Parte posterior del panel frontal Notas e Como medida de seguridad antes de limpiar los conectores apague el motor y extraiga la Ilave del interruptor de encendido e No toque nunca los conectores directamente con los dedos o con cualquier dispositivo met lico Desmontaje de la unidad 1 Presione el clip del interior de la cubierta frontal con un destornillador fino y libere dicha cubierta con suavidad E 2 Repita el paso 1 en el lado izquierdo La cubierta frontal podr extraerse GS 3 Emplee un destornillador fino para presionar el clip de la parte izquierda de la unidad a continuaci n tire del lado izquierdo de la unidad hasta que el enganche salga del marco 4 Repita el paso 3 en el lado derecho A 5 Saque la unidad del marco 23 24 Especificaciones Secci n del reproductor de discos compactos Sistema Relaci n se al ruido Respuesta de frecuencia Fluctuaci n y tr molo Audiodigital de discos compactos 90 dB 10 20 000 Hz Inferior al l mite medible Secci n del sintonizador FM Gama de sintonizaci n Terminal de antena Frecuencia intermedia Sensibilidad utilizable Selectividad Relaci n se al ruido Distorsi n arm nica a 1 kHz Separaci n Respuesta de frecuencia AM Gama de sintonizaci n Terminal de antena Frecuencia intermedia S
16. be turned off See Changing the sound and display settings on page 15 Storing the station names Station Memo You can assign a name to each radio station and store itin memory The name of the station currently tuned in appears in the display You can assign a name of up to eight characters per station Storing the station names 1 Tune in a station whose name you want to store 2 Press for two seconds TM I EFLA 3 Enter the characters Rotate the dial clockwise to select the desired characters A gt B gt C gt Z gt 0 gt 1 gt 2 gt 9 gt gt gt 5 gt gt 9 gt gt lt gt gt _ Fi e Mz ee AD E ta I If you rotate the dial counterclockwise the characters appear in the reverse order If you want to put a blank space between characters select _ under bar O Press gt after locating the desired character The flashing cursor moves to the next space If you press 2 the flashing cursor moves to the left Repeat steps O and O to enter the entire name 4 To return to normal radio reception press for two seconds Tip To erase or correct a name enter _ for each character under bar 11 12 Displaying the station name Press during radio reception mes lI Each time you press DSPL the item changes as follows m Station name gt Frequency Clock Ifthe stat
17. does not appear To return to normal playback mode press SHIFT Push the SEEK AMS control up or down to select the track number you want to skip and press 6 ENTER Pua e K KA W a EEE TTA D a I rat PLAY MODE NTER The indication changes from PLAY to SKIP To return the indication to PLAY press ENTER again Repeat step 2 to set PLAY or SKIP for all the tracks Press 4 PLAY MODE for two seconds The unit returns to normal CD playback mode 20 5 Press SHIFT Notes e You can set PLAY or SKIP for up to 24 tracks e You cannot set SKIP for all the tracks on a CD Playing specific tracks only You can select e BANK ON to play the tracks with the PLAY setting e BANK INV Inverse to play the tracks with the SKIP setting 1 During playback press SHIFT then press 4 PLAY MODE repeatedly until BANK appears 2 Press gt repeatedly until the desired setting appears gt BANK ON gt BANK INV gt AN Playback starts from the track following the current one 3 Press GHIFT To return to normal playing mode select BANK OFF in step 2 above Additional Information Precautions e If your car was parked in direct sunlight resulting in a considerable rise in temperature inside the car allow the unit to cool off before operating it e If no power is being supplied to the unit
18. n de restauraci n se borrar n los ajustes del reloj y algunas funciones memorizadas e Cuando conecte el cable de alimentaci n o restaure la unidad espere unos 10 segundos antes de insertar un disco No inserte ning n disco antes de que transcurran los 10 segundos ya que de lo contrario la unidad no se restaurar y deber volver a pulsar el bot n de restauraci n Extracci n del panel frontal Es posible extraer el panel frontal de esta unidad para evitar su robo Antes de extraer el panel frontal ceri rese de presionar OFF Despu s presione a fin de abrirlo despu s desl celo hacia la derecha y por ltimo tire de su parte izquierda Notas e Procure no dejar caer el panel al extraerlo de la unidad e Si retira el panel con la unidad encendida sta se desactivar autom ticamente la alimentaci n para evitar da en los altavoces e Cuando lleve consigo el panel gu rdelo en el estuche suministrado Fijaci n del panel frontal Coloque el orificio del panel sobre el eje de la unidad como muestra la ilustraci n y a continuaci n ejerza presi n sobre el lado izquierdo para fijarlo Notas Aseg rese de no fijar el panel frontal al rev s e No ejerza excesiva presi n sobre el panel al fijarlo a la unidad No sujete con demasiada fuerza ni presione excesivamente sobre el visor del panel frontal e No exponga el panel frontal a la luz solar directa a fuentes t rmicas como conduct
19. 828 CDX 727 CDX 626 MD changer 6 discs MDX 65 Other CD MD changers with the Sony BUS system Source selector XA C30 Design and specifications are subject to change Separation 35 dB at 1 kHz Frequency response 30 15 000 Hz AM Optional equipment Tuning range AM tuning interval 9 kHz 10 kHz switchable 531 1 602 kHz at 9 kHz step 530 1 710 kHz at 10 kHz step Aerial terminal External aerial connector Intermediate frequency 10 7 MHz 450 kHz Sensitivity 30 pV Power amplifier section without notice Outputs Speaker outputs sure seal connectors Speaker impedance 4 8 ohms Maximum power output 40 W x 4 at 4 ohms Troubleshooting guide The following checklist will help you remedy the problems you may encounter with your unit Before going through the checklist below check the connection and operating procedures General Problem Cause Solution No sound e Cancel the ATT function e Set the fader control to the centre position for two speaker systems e Rotate the dial in a clockwise direction to adjust the volume The contents of the memory e The power cord or battery has been disconnected have been erased e The reset button has been pressed Store again into the memory Indications do not appear in the Remove the front panel and clean the connectors See display Cleaning the connectors page 22 for details No beep sound e An optional power amplifier is connected and you are not using t
20. CRL Desplazamiento autom tico p gina 8 17 Nota S conecta un amplificador opcional de potencia y no utiliza el incorporado el pitido se desactivar 1 Pulse GHIFT 2 Pulse 3 SET UP varias veces hasta que aparezca el elemento que desee Cada vez que pulse 3 SET UP los elementos cambian de la siguiente forma CLOCK D INFO AMBER GREEN gt DIM BEEP RM gt HPF gt LPF gt M DSPL gt A SCRL Este elemento no aparecera cuando no haya ning n CD o MD en reproducci n Nota El elemento mostrado variar dependiendo de la fuente 3 Pulse gt para seleccionar el ajuste que desee por ejemplo ON u OFF 4 pulse SHIFT Una vez finalizado el ajuste de modo aparecer la indicaci n de modo de reproducci n normal Refuerzo de los graves D bass Es posible disfrutar de graves intensos y n tidos La funci n D bass refuerza la se al de frecuencias bajas con una curva m s marcada que la del refuerzo de graves convencional Es posible escuchar la l nea de graves con mayor nitidez aunque el sonido vocal se encuentre al mismo nivel Igualmente es posible enfatizar y ajustar los graves f cilmente con el control D BASS D BASS 3 a D BASS 2 D BASS 1 Nivel 2 2 Frecuencia Hz Ajuste de la curva de graves Gire el control D BASS para ajustar el nivel de graves 1 2 o 3 D BASS aparece en el visor Para cancelar gir
21. MD is not prerecorded NO NAME appears in the display You can label CD and CD TEXT discs with a personalized name using the disc memo function Refer to Labelling a CD page 19 However if you use personalized labels they will always take priority over the original CD TEXT information when such information is displayed Tip If you want to display the original CD TEXT information after labelling the CD TEXT disc with a personalized name press SHIFT then gt After you select the desired item the display will automatically change to the Motion Display mode after a few seconds In the Motion Display mode all the above items are scrolled in the display one by one in order Tip The Motion Display mode can be turned off See Changing the sound and display settings on page 15 Automatically scrolling a disc name Auto Scroll If the disc name artist name or track name on a CD TEXT disc or MD exceeds 8 characters and the Auto Scroll function is on information automatically scrolls across the display as follows e The disc name appears when the disc has changed if the disc name is selected e The track name appears when the track has changed if the track name is selected If you press to change the display item the disc or track name of the MD or CD TEXT disc is scrolled automatically whether you set the function on or off continue to next page gt 17 1 During p
22. P CD1 Adaptador sencillo de discos compactos CSA 8 Cambiador de CD 10 discos CDX 828 CDX 727 CDX 626 Cambiador de MD 6 discos MDX 65 Otros cambiadores de CD MD con el sistema BUS de Sony Selector de fuente XA C30 Accesorios opcionales Equipo opcional Dise o y especificaciones sujetos a cambios sin previo aviso Guia de soluci n de problemas La siguiente lista de comprobaciones proporciona ayuda para solucionar la mayoria de los problemas que pueden producirse con la unidad Antes de consultar la lista que aparece a continuaci n compruebe los procedimientos de conexi n y funcionamiento Generales Problema Ausencia de sonido Causa Soluci n e Cancele la funci n ATT e Ajuste el control de equilibrio entre los altavoces en la posici n central para sistemas de 2 altavoces e Gire el dial en el sentido de las agujas del reloj para ajustar el volumen Se ha borrado el contenido de la memoria e Ha desconectado el cable de alimentaci n o la bater a e Ha pulsado el bot n de restauraci n Vuelva a realizar el almacenamiento en la memoria El visor no muestra indicaciones Retire el panel frontal y limpie los conectores Para obtener m s informaci n consulte el apartado Limpieza de los conectores p gina 22 Ausencia de pitidos e Ha conectado un amplificador opcional de potencia y no utiliza el incorporado e Los pitidos est n cancelados p gina 15 Repro
23. S ONY 3 865 913 31 1 FM AM Compact Disc Player Operating Instructions Manual de instrucciones O a j oe For installation and connections see the supplied installation connections manual Para obtener informaci n sobre la instalaci n y las conexiones consulte el manual de instalaci n conexiones suministrado y fw eu ts AS uffa Sfw Su ts efi HC COMPACT DIGITAL AUDIO TEXT CDX C7500 O 1999 by Sony Corporation Welcome Thank you for purchasing the Sony Compact Disc Player This unit lets you enjoy a variety of features as well as an optional rotary commander or a wireless remote In addition to the CD playback and radio operations you can expand your system by connecting an optional CD MD unit When you operate this unit or a connected optional CD unit with the CD TEXT function the CD TEXT information will appear in the display when you play a CD TEXT disc 1 You can also connect a CD changer an MD changer a CD player or an MD player 2 A CD TEXT disc is an audio CD that includes information such asthe disc name artist name and track names Thisinformation isrecorded on the disc Table of Contents This Unit Only Location Of controls c occoccconiconicocononononnnncnnncnoncnnnnnono 4 Getting Started Resetting the unit erratas 6 Detaching the front panel ccccseeeeeeseens 6 Setting the COCK side
24. alance and fader You can store the bass and treble levels independently for each source 1 Select the item you want to adjust by pressing repeatedly VOL volume SUB subwoofer volume BAS bass gt TRE treble BAL left right FAD front rear 2 Adjust the selected item by rotating the dial Adjust within three seconds after selecting the item After three seconds the dial function reverts to volume control Attenuating the sound Press on the optional rotary commander or wireless remote ATT ON flashes momentarily To restore the previous volume level press again Tip The unit decreases the volume automatically when a telephone call comesin Telephone ATT function Changing the sound and display settings The following items can be set e CLOCK page 7 e D INFO Dual Information to display the clock and the play mode at the same time ON or to display the information alternately OFF e AMBER GREEN to change the illumination color to amber or green e DIM Dimmer to change the brightness of the display Select ON to dim the display e BEEP to turn on or off the beeps e RM Rotary Commander to change the operative direction of the controls of the optional rotary commander Select NORM to use the rotary commander as the factory set position Select REV when you mount the rotary commander on the right side of the steer
25. biar autom ticamente al modo de desplazamiento de indicaciones por el visor transcurridos unos segundos En este modo todos los elementos anteriores se desplazan por el visor de uno en uno por orden Consejo Es posible desactivar el modo de desplazamiento de indicaciones por el visor consulte Camblo de los ajustes de sonido y visualizaci n en la p gina 15 Almacenamiento de nombres de emisoras Memorando de emisoras Usted podr asignar un nombre a cada emisora y almacenarlo en la memoria El nombre de la emisora actualmente sintonizada aparecer en el visor Usted podr utilizar hasta ocho caracteres por emisora Almacenamiento de nombres de emisoras 1 sintonice la emisora cuyo nombre desee almacenar 2 Pulse durante dos segundos Dal TER I 3 Introduzca los caracteres O Gire el dial en el sentido de las agujas del reloj para seleccionar los caracteres que desee A gt B gt C gt zZz gt 0 gt 1l1 gt 2 gt 9 gt gt gt t gt gt li gt gt gt lt gt gt _ CMe 1 revi Si gira el dial en el sentido contrario a las agujas del reloj los caracteres aparecer n en orden inverso Si desea dejar un espacio en blanco entre caracteres seleccione _ subrayado O Pulse gt despu s de haber localizado el car cter deseado El cursor parpadeante se mover hasta el espacio siguiente TM i roe li A E EEE a Si pulsa 2 el curs
26. ction for discs that have been assigned a custom name For more information on disc names refer to Labelling Selecting specific tracks for playback Bank Fora CD unit with the custom file function If you label the disc you can set the unit to skip or play the tracks of your choice a CD page 19 1 Press LIST The name assigned to the current disc appears in the display When you assign a disc memo label to a CD TEXT disc it takes priority over the original CD TEXT information 2 Press repeatedly until you find the desired disc 3 Press ENTER to play the disc Notes After a disc name has been displayed for five seconds the display returns to normal playback mode To turn off the display press DSPL The track names are not displayed during MD or CD TEXT disc playback e If there are no discsin the magazine NO DISC appearsin the display e If a disc has not been assigned a custom file kkk appears in the display e If the disc information has not been read by the unit NOT READ appears in the display To load a disc first press the number button then choose the disc that has not been loaded e There are also some letters which cannot be displayed during MD or CD TEXT disc playback 1 Start playing the disc and press SHIFT then press 4 PLAY MODE for two seconds Bank edit mode Note If you have not labelled the disc the bank edit mode
27. de frecuencia Sonar un pitido y se almacenar el ajuste 5 Pulse GHIFT Notas e La unidad no almacena emisoras de se ales d biles Si se reciben pocas emisoras algunos botones num ricos conservar n sus par metros anteriores e Si el visor muestra alg n n mero la unidad almacenar las emisoras a partir del mostrado en el visor e Si no hay ning n CD en la unidad s lo aparece la banda del sintonizador aunque pulse SOURCE Memorizaci n de las emisoras deseadas Es posible almacenar un m ximo de 20 emisoras de FM 10 de FM1 y 10 de FM2 y 10 de AM en el orden en que desee 1 Pulse SOURCE varias veces para seleccionar el sintonizador 2 Pulse varias veces para seleccionar la banda 3 Desplace el control SEEK AMS hacia arriba o abajo para sintonizar la emisora que desee almacenar en el bot n num rico 4 Pulse y mantenga presionado el bot n num rico que desee C a CO hasta que aparezca MEM En el visor aparecer la indicaci n del bot n num rico Nota Si almacena otra emisora en el mismo bot n num rico la emisora previamente almacenada se borrar Recepci n de emisoras memorizadas 1 Pulse SOURCE varias veces para seleccionar el sintonizador 2 Pulse varias veces para seleccionar la banda 3 Pulse el bot n num rico a GOD en el que est almacenada la emisora que desee Si no puede sintonizar una emisora programada Desplace el control SEEK AMS hacia a
28. ducci n de CD MD Problema No es posible insertar un disco Causa Soluci n e Ya hay un CD insertado e Ha insertado el CD a la fuerza incorrectamente o al rev s MD La reproducci n no se inicia Disco defectuoso MD o sucio CD El disco se expulsa autom ticamente La temperatura ambiental es superior a 50 C EI CD no se expulsa Pulse el bot n 4 durante dos segundos Los botones de funcionamiento no se activan Pulse el bot n de restauraci n El sonido se omite debido a vibraciones e Ha instalado la unidad en un ngulo superior a los 60 e No ha instalado la unidad en una parte segura del autom vil Recepci n de radio Problema No es posible realizar la sintonizaci n de programaci n Causa Soluci n e Memorice la frecuencia correcta e La emisi n es demasiado d bil No es posible realizar la sintonizaci n autom tica La emisi n es demasiado d bil Utilice la sintonizaci n manual La indicaci n ST parpadea e Realice la sintonizaci n con precisi n e La emisi n es demasiado d bil Realice el ajuste en el modo monof nico MONO p gina 11 25 26 Indicaciones de error cuando se ha conectado una unidad de CD MD opcional Las siguientes indicaciones parpadear n durante cinco segundos aproximadamente y se oir una alarma Indicaci n NO MAG Causa No ha insertado el cargador de discos en la unidad de CD MD
29. e el control hasta la posici n OFF Nota Si los graves se distorsionan ajuste el control D BASS o el control de volumen 15 Ajuste de la frecuencia de los altavoces y del altavoz o altavoces potenciadores de graves Mediante el ajuste del nivel de corte de se ales de frecuencia no deseadas los altavoces conectados al terminal de salida y o el altavoz o altavoces conectados al terminal de salida secundario emitir n una imagen de sonido n tida Ajuste de la frecuencia de los altavoces conectados mediante el terminal de salida Filtro de paso alto HPF Con el fin de adaptarse a las caracter sticas de los altavoces conectados mediante el terminal de salida podr eliminar las se ales de baja frecuencia no deseadas que se introducen en dichos altavoces 1 presione para seleccionar una fuente radio CD o MD 2 Presione y despu s E SET UP varias veces hasta que aparezca HPF 3 Presione gt 0 varias veces para seleccionar el ajuste que desee Cada vez que presione gt 0 la frecuencia de corte que aparece en el visor cambiar de la siguiente forma HPF OFF lt gt HPF 80 HZ lt gt HPF 120 HZ 4 Presione SHIFT Una vez finalizado el ajuste de la frecuencia el visor volver a mostrar el modo de reproducci n normal 16 Ajuste de la frecuencia de los altavoces potenciadores de graves Filtro de paso bajo LPF Con el fin de adaptarse a las caracte
30. e limpieza disponibles en las tiendas del ramo ni aerosoles antiest ticos destinados a discos anal gicos Nota sobre condensaci n de humedad En los d as lluviosos o en zonas muy h medas puede condensarse humedad en las lentes del interior del reproductor de discos compactos Si esto ocurre la unidad no funcionar correctamente En este caso extraiga el disco y espere una hora aproximadamente hasta que la humedad se evapore Reproducci n de discos compactos de 8 cm Utilice el adaptador sencillo de discos compactos opcional de Sony CSA 8 para evitar que el reproductor de discos compactos se da e 22 Mantenimiento Sustituci n del fusible Cuando sustituya el fusible compruebe que utiliza uno con el amperaje especificado en el fusible original Si ste se funde compruebe la conexi n de alimentaci n y sustit yalo Si una vez sustituido vuelve a fundirse es posible que exista un funcionamiento defectuoso interno En este caso p ngase en contacto con el proveedor Sony m s pr ximo Fusible 10 A Advertencia No utilice nunca un fusible de amperaje superior al del suministrado con la unidad ya que sta podr a da arse Limpieza de los conectores La unidad puede no funcionar correctamente si los conectores de la misma y del panel frontal est n sucios Con el fin de evitarlo abra el panel frontal pulsando a continuaci n sep relo y limpie los conectores con un bastoncillo humedecido en
31. e problem Insert another CD MD ERROR A CD is dirty or inserted upside down Clean or insert the CD correctly An MD does not play because of some problem Insert another MD BLANK No tracks have been recorded on an MD Play an MD with tracks recorded on it RESET The CD MD unit cannot be operated because of some problem Press the reset button of the unit NO READY The lid of the MD unit is open or MDs are not inserted properly Close the lid or insert the MDs properly HI TEMP The ambient temperature is more than 50 C Wait until the temperature goes down below 50 C 1 When an error occurs during playback of an MD or CD the disc number of the MD or CD does not appear in the display 2 The disc number of the disc causing the error appears in the display If the above mentioned solutions do not help improve the situation consult your nearest Sony dealer 26 Bienvenido Enhorabuena por la adquisici n del reproductor de discos compactos Sony Esta unidad le permitir disfrutar de una serie de funciones as como de un mando rotativo o inal mbrico opcionales Adem s de las operaciones de reproducci n de CD o de recepci n de emisoras es posible ampliar el sistema conectando una unidad de CD MD opcional Si utiliza esta unidad o conecta u otra opcional de CD conectada que disponga de la funci n CD TEXT el visor mostrar la inf
32. ensibilidad Intervalo de sinton a de FM 50 kHz 200 kHz conmutable 87 5 108 0 MHz intervalo de 50 kHz 87 5 107 9 MHz intervalo de 200 kHz Conector de antena externa 10 7 MHz 12 dBf 75 dB a 400 kHz 65 dB est reo 68 dB mono 0 7 est reo 0 5 mono 35 dBa 1 kHz 30 15 000 Hz Intervalo de sinton a de AM 9 kHz 10 kHz conmutable 531 1 602 kHz intervalo de 9 kHz 530 1 710 kHz intervalo de 10 kHz Conector de antena externa 10 7 MHz 450 kHz 30 pV Secci n del amplificador de potencia Salidas Impedancia de altavoz Salidas de altavoz conectores de sellado seguro 4 8 ohmios Salida m xima de potencia 40 W x 4 a 4 ohmios Generales Salidas Salidas de l nea 2 Cable de control de rel de antena motorizada Cable de control de amplificador de potencia Cable de control de atenuaci n para tel fono Graves 8 dB a 100 Hz Agudos 8 dB a 10 kHz Requisitos de alimentaci n Bater a de autom vil de 12 V CC toma a tierra Controles de tono negativa Dimensiones Aprox 178 x 50 x 185 mm an al prf Dimensi n de montaje Aprox 182 x 53 x 162 mm an al prf Masa Aprox 1 2 kg Accesorios suministrados Componentes para instalaci n y conexiones 1 juego Estuche para el panel frontal 1 Mando rotativo RM X4S Control remoto inal mbrico RM X47 Cable BUS suministrado con un cable de pines RCA RC 61 1 m RC 62 2 m Pa o de limpieza X
33. eset the unit Remove the front panel and press the reset button with a pointed object such as a ballpoint pen Reset button Notes e Pressing the reset button will erase the clock setting and some memorised functions When you connect the power supply cord to the unit or reset the unit wait for about 10 seconds before you insert a disc If you insert a disc within these 10 seconds the unit will not be reset and you will have to pressthe reset button again Detaching the front panel You can detach the front panel of this unit to protect the unit from being stolen Before detaching the front panel be sure to press first Then press to open the front panel then slide the front panel to the right side and pull out the left side of the front panel Notes e Be sure not to drop the panel when detaching it from the unit e If you detach the panel while the unit is still turned on the power will turn off automatically to prevent the speakers from being damaged e When carrying the front panel with you use the supplied front panel case Attaching the front panel Place the hole in the front panel onto the spindle on the unit as illustrated then push the left side in Notes Be sure not to attach the front panel upside down e Do not press the front panel too hard against the unit when attaching it e Do not press too hard or put excessive pressure on the display window of t
34. he built in amplifier e The beep sound is cancelled page 15 CD MD playback Problem Cause Solution A disc cannot be loaded e Another CD is already loaded e The CD is forcibly inserted upside down or in the wrong way MD Playback does not begin Defective MD or dirty CD A disc is automatically ejected The ambient temperature exceeds 50 C CD will not eject Press amp for two seconds The operation buttons do not Press the reset button function The sound skips due to e The unit is installed at an angle of more than 60 vibration e The unit is not installed in a sturdy part of the car Radio reception Problem Cause Solution Preset tuning is not possible e Memorise the correct frequency e The broadcast signal is too weak Automatic tuning is not The broadcast signal is too weak possible Use manual tuning The ST indication flashes e Tune in the frequency accurately e The broadcast signal is too weak Set to the MONO mode page 11 25 Error displays when optional CD MD unit is connected The following indications will flash for about five seconds and an alarm sound will be heard Display NO MAG Cause The disc magazine is not inserted in the CD MD unit Solution Insert the disc magazine in the CD MD unit NO DISC No disc is inserted in the CD MD unit Insert discs in the CD MD unit NG DISCS A CD MD cannot play because of som
35. he front panel e Do not expose the front panel to direct sunlight or heat sources such as hot air ducts and do not leave it in a humid place Never leave it on the dashboard of a car parked in direct sunlight or where there may be a considerable rise in temperature Caution alarm If you turn the ignition key switch to the OFF position without removing the front panel the caution alarm will beep for a few seconds If you connect an optional power amplifier and do not use the built in amplifier the beep sound will be deactivated Setting the clock The clock uses a 12 hour digital indication 2 Press SHIFT L o Wirt LIL SETUP The clock starts Example To set the clock to 10 08 1 Press SHIFT then press SET UP 3 Press SHIFT repeatedly until CLOCK appears After the clock setting is complete the display returns to normal playback mode SETUP gt The hour indication flashes O Set the hour to go backward to go forward EET 1 ant SME Iati SETUP Sis O Press gt LA F 1 mol LE SET UP AA The minute indication flashes O Set the minute to go backward to go forward CD Player Listening to a CD 1 Press and insert the CD Labelled side up I gt 2 Close the front panel Playback starts automatically If a CD is already inserted press repeatedly until CD appears to star
36. ing column e HPF High Pass Filter e LPF Low Pass Filter M DSPL Motion display to turn the motion display on or off e A SCRL Auto Scroll page 8 17 Note If you connect an optional power amplifier and do not use the built in amplifier the beep sound will be disabled 1 press SHiFD 2 Press SET UP repeatedly until the desired item appears Each time you press 3 SET UP the item changes as follows CLOCK gt D INFO AMBER GREEN DIM BEEP RM gt HPF gt LPF gt M DSPL gt A SCRL When no CD or MD is playing this item will not appear Note The displayed item will differ depending on the source 3 Press gt to select the desired setting Example ON or OFF 4 Press SHIFD After the mode setting is complete the display returns to normal playback mode Boosting the bass sound D bass You can enjoy a clear and powerful bass sound The D bass function boosts the low frequency signal with a sharper curve than conventional bass boost You can hear the bass line more clearly even while the vocal volume remains the same You can emphasise and adjust the bass sound easily with the D BASS control ssa __ D BASS 2 x D BASS 1 Adjusting the bass curve Turn the D BASS control to adjust the bass level 1 2 or 3 D BASS appears in the display To cancel turn the control to OFF Note If the bass sound becomes dist
37. ion name of a station is not stored NO NAME appears in the display for one second Erasing the station name 1 Tune in any station and press for two seconds 2 Press for two seconds 3 Rotate the dial to select the name that you want to erase 4 Press C6 ENTER for two seconds The name is erased Repeat steps 3 and 4 if you want to erase other names 5 Press for two seconds The unit returns to the normal radio reception mode Locating a station by name List up 1 press momentarily The name assigned to the station currently playing appears in the display 2 Press repeatedly until you find the desired station 3 Press 6 ENTER to tune in the desired station Note Once the station name or frequency has been displayed for five seconds the display goes back to its normal mode To turn off the display press SPD Each time you press SOURCE the source changes as follows Other Functions TONER Seb stab If the corresponding optional equipment is not connected this item will not appear You can connect an optional rotary der RM X4 ith thi it x commander Swi da Pressing changes the operation in the following ways e Tuner FM1 gt FM2 gt AM Labelling the rotary gt MD unit MDI gt MDZ n commander By rotating the control the Depending on how you mount the rotary SEEK AMS control commander attach the appropriate label as shown in the illustration below
38. l panel frontal La reproducci n se iniciar de forma autom tica Si ya hay un CD insertado pulse SOURCE varias veces hasta que aparezca CD para que se inicie la reproducci n Tiempo de reproducci n transcurrido N mero de tema Indicaci n de CD Nota Si desea reproducir un CD de 8 cm utilice el adaptador sencillo opcional de discos compactos Sony CSA 8 Para Pulse Detener la reproducci n OFF Expulsar el CD y a continuaci n amp Cambio de la indicaci n del visor Cada vez que pulse DSPL durante la reproducci n de un CD o de un disco CD TEXT los elementos cambiar n de la siguiente forma v N mero de tema Tiempo de reproducci n transcurrido v T tulo del disco Nombre del cantante v T tulo del tema v Reloj 1 Si inserta un disco que no sea CD TEXT el visor mostrar NO NAME 2 Si reproduce un disco CD TEXT aparece el nombre del cantante en el visor despu s del t tulo del disco S lo discos CD TEXT con nombres de cantantes Despu s de si seleccionar el elemento que desee el visor cambiar autom ticamente al modo de desplazamiento de indicaciones por el visor transcurridos unos segundos En este modo todos los elementos anteriores se desplazan por el visor de uno en uno por orden Consejo Es posible desactivar el modo de desplazamiento de indicaciones por el visor consulte Camblo de los ajustes de sonido y vi
39. layback press SHIFT 2 Press SET UP repeatedly until A SCRL appears 3 Press 2 to select A SCRL ON 4 Press SHIFT To cancel Auto Scroll select A SCRL OFF in step 3 above Note For some CD TEXT discs with very many characters the following cases may happen Some of the characters are not displayed Auto Scroll does not work Tip To manually scroll the long name of an MD or CD TEXT disc after activating the Auto Scroll function Press CSHIFT then manual scroll Locating a specific track Automatic Music Sensor AMS During playback push the SEEK AMS control up or down and release for each track you want to skip To locate succeeding PP tracks To locate preceding tracks SES Locating a specific point in a track Manual Search During playback push the SEEK AMS control up or down and hold Release when you have found the desired point Ma SEEK AMS Locating a disc by disc number Direct Disc Selection To search forward To search backward Press the number button that corresponds with the desired disc number The desired disc in the current unit begins playback 18 Playing tracks repeatedly Repeat Play You can select e REP 1 to repeat a track e REP 2 to repeat a disc 1 During playback press SHIFT 2 Press REP repeatedly until the desired setting appears gt REP 1 gt REP 2 REP 0
40. lmacenamiento de nombres de emisoras Memorando de emisoras cec 11 Localizaci n de una emisora por su nombre TASHA a E E E teat 12 Otras funciones Informaci n complementaria Etiquetado del mando rotativo Precauciones Uso del mando rotativo Mantenimiento Ajuste de las caracter sticas de sonido 14 Desmontaje de la unidad 00 cece 23 Atenuaci n del sonido cccinionioninninninncarasesess 14 Especificaciones cssssesessessseesseesseesseesseessee 24 Cambio de los ajustes de sonido y Gu a de soluci n de problemas 25 Visualizaci n sist iaa 15 Refuerzo de los graves Did iaa 15 Ajuste de la frecuencia de los altavoces y del altavoz o altavoces potenciadores de SLAVES OEE E 16 Localizaci n de los controles CDX C7500 Consulte las p ginas indicadas para obtener m s informaci n Control SEEK AMS b squeda sensor de m sica autom tico b squeda manual 9 10 11 18 20 Bot n MODE selecci n de banda unidad 10 17 19 Bot n 2 expulsi n situado en la parte frontal de la unidad detr s del panel frontal 8 8 10 16 17 19 El 7 11 12 14 19 Bot n SOUND 14 Visor Bot n DSPL cambio del modo de indicaci n 8 11 12 17 19 Bot n OPEN 6 8 22 Bot n LIST Memorando de emisoras 11 12 BO NO Memorando de disco 19 Funci n de listado 12 20 Bot n SOURCE selecci n de fuente Dial control de vo
41. lumen volumen de potenciaci n de graves graves agudos izquierdo derecho trasero delantero E E i DSJ Bot n de restauraci n situado en la parte frontal de la unidad detr s del panel frontal 6 Bot n OFF 6 8 Bot n SHIFT PLAY MODE 10 11 20 21 REP 9 18 SET UP 7 9 15 16 17 18 SHUF 9 18 Selector de frecuencia situado en la base de la unidad Consulte Selector de frecuencia del manual de Instalaci n conexiones Durante la recepci n de radio Botones num ricos 10 Durante la reproducci n de CD MD Botones de selecci n directa de disco 18 20 Receptor para el control remoto inal mbrico opcional Control D BASS 15 Control remoto inalambrico opcional RM X47 RESE Botones del control remoto inal mbrico con la misma funci n que los de esta unidad Bot n OFF Bot n SEEK AMS Botones O El Bot n ATT El Bot n SOUND SEL NE Bot n DSPL Bot n PRESET DISC No es posible realizar la b squeda manual ni la sintonizaci n manual con el control remoto Bot n SOURCE Bot n MODE DIR Procedimientos iniciales Restauracion de la unidad Antes de utilizar la unidad por primera vez o despu s de sustituir la bater a del autom vil es necesario restaurar dicha unidad Pulse el bot n de restauraci n con un objeto puntiagudo por ejemplo un bol grafo O AN Bot n de restauraci n Notas Al pulsar el bot
42. m order Playing tracks repeatedly Repeat Play 1 During playback press SHIFT Every time you press SHIFT only the items you can select light up Ea o SHIFT o o o o o o 1 2 03 212 7 J REP SHUF 2 Press REP repeatedly until REP 1 SETUP PLAY MODE REP SHUF Repeat Play starts 3 Press GHFD To return to normal playback mode select REP OFF in step 2 above Playing tracks in random order Shuffle Play 1 During playback press SHIFT 2 Press SHUF repeatedly until SHUF 1 appears A Y no SETUP_ PLAY MODE REP SHUF Shuffle Play starts 3 Press GHIFT To return to normal playback mode select SHUF OFF in step 2 above Radio Memorising stations automatically Best Tuning Memory BTM The unit selects the stations with the strongest signals and memorises them in the order of their frequencies You can store up to 10 stations on each band FM1 FM2 and AM Caution When tuning in stations while driving use Best Tuning Memory to prevent accidents 1 Press repeatedly to select the tuner Each time you press SOURCE the source changes as follows gt TUNER gt CD gt MD If the corresponding optional equipment is not connected this item will not appear 2 Press repeatedly to select the band Each time you press MODE the band changes as follows gt FM1 gt FM2
43. modo de reproducci n normal seleccione REP OFF en el paso 2 anterior Reproducci n de temas en orden aleatorio Reproducci n aleatoria Es posible seleccionar e SHUF 1 para reproducir los temas del disco actual en orden aleatorio e SHUF 2 para reproducir los temas de la unidad actual en orden aleatorio e SHUF ALL para reproducir todos los temas de todas las unidades en orden aleatorio 1 Durante la reproducci n pulse SHIFT 2 Pulse SHUF varias veces hasta que aparezca el ajuste que desee gt SHUF 1 gt SHUF 2 gt SHUF ALL SHUF OFF Se inicia la reproducci n en orden aleatorio Es posible disponer de SHUF ALL s lo para cambiadores de CD 3 Pulse SHIFT Para volver al modo de reproducci n normal seleccione SHUF OFF en el paso 2 anterior Asignacion de titulos a los discos compactos Memorando de discos Unidad de CD con funci n de archivo personalizado Es posible asignar un t tulo personalizado a cada disco utilizando un m ximo de ocho caracteres para cada uno de stos La asignaci n de t tulos permitir localizar los discos por el nombre p gina 20 y seleccionar los temas espec ficos que se quieran reproducir p gina 20 1 Reproduzca el CD y pulse durante dos segundos mua DSC ny wi sls e ZAS gt 2 Introduzca los caracteres O Gire el dial en el sentido de las
44. n sonido con un sistema de 2 altavoces ajuste el control de equilibrio en la posici n central e Si el autom vil dispone de antena motorizada observe que sta se extender autom ticamente durante el funcionamiento de la unidad e La conexi n de esta unidad puede producir cierta descarga de la bater a si el autom vil no dispone de posici n ACC accesorios en el interruptor de la llave de encendido Si desea realizar alguna consulta o solucionar alg n problema referentes a la unidad que no aparezcan en este manual p ngase en contacto con el proveedor Sony m s pr ximo Notas sobre el manejo de discos compactos Si el disco est sucio o es defectuoso puede producirse p rdida de sonido durante la reproducci n Para disfrutar de buena calidad de sonido maneje el disco como se explica a continuaci n C jalo por los bordes Para mantenerlo limpio no toque la superficie No adhiera papel ni cinta adhesiva en la superficie de la etiqueta contin a en la pagina siguiente gt 21 No exponga los discos a la luz solar directa ni a fuentes de calor como conductos de aire caliente ni los deje en un autom vil aparcado a la luz solar directa ya que puede producirse un considerable aumento de temperatura en su interior Antes de realizar la reproducci n limpie los discos con un pa o opcional de limpieza desde el centro hacia los bordes No utilice disolventes como bencina diluyentes o productos d
45. o funciona Consejo Para desplazarse manualmente por el t tulo largo de un MD o disco CD TEXT despu s de activar la funci n de desplazamiento autom tico pulse y a continuaci n E desplazamiento manual Localizaci n de un tema espec fico Sensor de m sica autom tico AMS Durante la reproducci n desplace el control SEEK AMS hacia arriba o abajo y su ltelo por cada tema que desee omitir Para localizar temas Deine posteriores Para localizar temas anteriores SEEK ANS Localizaci n de un punto espec fico de un tema B squeda manual Durante la reproducci n desplace el control SEEK AMS hacia arriba o abajo y mant ngalo en esta posici n Su ltelo cuando encuentre la parte que desee Para buscar hacia pei delante Para buscar hacia atr s U SEEK AMS Localizaci n de discos mediante el n mero de disco Selecci n directa de disco Pulse el bot n num rico correspondiente al n mero de disco que desee El disco que se encuentra en la unidad actual comienza a reproducirse 18 eoa M T a Reproducci n repetida de temas Reproducci n repetida Es posible seleccionar e REP 1 para repetir un tema e REP 2 para repetir un disco 1 Durante la reproducci n pulse SHIFT 2 Pulse REP varias veces hasta que aparezca el ajuste que desee gt REP 1 gt REP 2 REP OFF 4 Se inicia la reproducci n repetida 3 Pulse SHIFT Para volver al
46. o segundos el visor volver al modo normal Para desactivar la indicaci n pulse DSPL Cada vez que pulse SOURCE la fuente cambiara de la siguiente forma Otras funciones TUNER CD MD Si el equipo opcional correspondlente no est 54 a conectado el elemento no aparecer Tambi n puede controlar esta unidad con un p mando rotativo RM X4S opcional i Al pulsar MODE el funcionamiento cambiara de la siguiente forma e Sintonizador FM1 FM2 AM Etiquetado del mando Unidad de CD CD1 CD2 gt e Unidad de MD MD1 gt MD2 gt rotativo En funci n de c mo monte el mando rotativo Mediante el giro del control adhiera la etiqueta adecuada como se muestra SEEK AMS en la siguiente ilustraci n Gire el control y su ltelo para e Localizar un tema espec fico de un disco Gire y mantenga girado el control hasta localizar el punto espec fico de un tema y a continuaci n su ltelo para iniciar la reproducci n e Sintonizar emisoras autom ticamente Gire y mantenga girado el control para sintonizar una determinada emisora Mediante el giro del control mientras Este mando funciona mediante la pulsaci n de botones y o el giro de controles NT Tambi n es posible controlar unidades opcionales de CD o MD con el mando rotativo EA A O Mediante la pulsaci n de botones SOURCE y MODE Presione y gire el control para e Recibir emisoras memorizadas en los b
47. or parpadeante se mover hacia la izquierda Repita los pasos O y O hasta haber introducido todo el nombre 4 Para volver al modo de recepci n normal de la radio pulse durante dos segundos Consejo Para borrar corregir un nombre introduzca _ subrayado para cada car cter 1 1 Visualizaci n del nombre de la emisora Pulse durante la recepci n de una emisora Cada vez que pulse DSPL el elemento cambiar de la forma siguiente r gt Nombre de la emisora gt Frecuencia Reloj lt Si el nombre de la emisora no est almacenado en el visor aparecer durante un segundo NO NAME Borrado del nombre de una emisora 1 Sintonice cualquier emisora y pulsado durante dos segundos 2 Pulse durante dos segundos 3 Gire el dial para seleccionar el nombre que desee borrar 4 Pulse ENTER durante dos segundos El nombre se borrar Si desea borrar otros nombres repita los pasos 3 y 4 5 Pulse durante dos segundos La unidad volver al modo de recepci n normal de la radio 12 Localizaci n de una emisora por su nombre Listado 1 Pulse durante un instante El nombre asignado a la emisora actualmente recibida aparecer en el visor 2 Pulse repetidamente hasta encontrar la emisora deseada 3 Pulse C6 ENTER para sintonizar la emisora deseada Nota Despu s de haberse visualizado el nombre o la frecuencia de una emisora durante cinc
48. ormaci n CD TEXT al reproducir discos CD TEXT Tambi n es posible conectar un cambiador de CD un cambiador de MD un reproductor de CD o un reproductor de MD 2 Un disco CD TEXT es un CD de audio que contiene informaci n como el t tulo del disco nombre del cantante y t tulos de los temas Esta informaci n est registrada en el disco Indice Solo esta unidad Equipo opcional Localizaci n de los controles ooioccinnininnninc 4 Unidad de CD MD Reproducci n de discos compactos CD o de Procedimientos iniciales minidiscos MD coccion 17 Restauraci n de la unidad Reproducci n repetida de temas Reproducci n repetida occ 18 Extracci n del panel frontal Ajuste del reloj esscsssssssssssssssssssussssessnsssesssssee 7 Reproducci n de temas en orden aleatorio Reproducci n aleatoria ommmmo 18 a Asignaci n de t tulos a los discos compactos Reproductor de discos Memorando de discos 0 0 sce 19 compactos Localizaci n de discos mediante el nombre Reproducci n de discos compactos 8 Funci n de listado ccc 20 Reproducci n de discos compactos en diversos Selecci n de temas espec ficos para su MOLS E Tii 9 reproducci n Funci n de banco ou 20 Radio Memorizaci n autom tica de emisoras Memorizaci n de la mejor sinton a BTM cesses ias REA AE 10 Memorizaci n de las emisoras deseadas 10 Recepci n de emisoras memorizadas 10 A
49. orted adjust the D BASS control or volume 15 Adjusting the frequency of the speakers and the subwoofer s By setting the cut off level of unwanted frequency signals the speakers connected to the output terminal and or the subwoofer s connected to the sub out terminal will out put a cleare sound image Adjusting the frequency of the speakers connected from the output terminal High Pass Filter HPF To match the characteristics of the connected speakers from the output terminal you can cut out the unwanted low frequency signals entering the speakers 1 Press to select a source radio CD or MD 2 Press SHIFT then press 3 SET UP repeatedly until HPF appears 3 Press gt or repeatedly to select desired setting T ET IEI LAATAT AIA T DU CINT Each time you press gt or the cut off frequency in the display changes as follows HPF OFF lt gt HPF 80 HZ lt gt HPF 120 HZ 4 Press SHIFT When the frequency setting is complete the display returns to the normal playback mode Adjusting the frequency of the subwoofer s Low Pass Filter LPF To match the characteristics of the connected subwoofer s you can cut out the unwanted high and middle frequency signals entering the subwoofer s 1 press to select a source radio CD or MD 2 Press SHIFT then press 3 SET UP repeatedly until LPF appears 3 Press O gt or
50. os de aire caliente ni lo deje en un lugar h medo No lo deje nunca sobre el salpicadero de un autom vil aparcado bajo la luz solar directa ya que podr a producirse un considerable aumento de temperatura Alarma de precauci n Si gira el interruptor de la llave de encendido a la posici n OFF sin haber extra do el panel frontal la alarma de precauci n emitir pitidos durante unos segundos Si conecta un amplificador opcional de potencia y no utiliza el incorporado los pitidos se desactivar n Ajuste del reloj El reloj dispone de una indicaci n digital de 12 horas Ejemplo Para ajustar el reloj a las 10 08 1 Pulse y a continuaci n E SET UP varias veces hasta que aparezca CLOCK TET aes Ta TIT LELIL gt SETUP O Pulse gt SE Suena HALA SETUP gt J Los digitos de la hora parpadean O Ajuste la hora 1 para retroceder para avanzar LR T ETE E SETUP gt Los d gitos de los minutos parpadean O Ajuste los minutos para retroceder para avanzar 2 Pulse SHIFD Ll mina A SETUP El reloj se pone en funcionamiento 3 Pulse GHIFT Una vez finalizado el ajuste del reloj aparecer la indicaci n de modo de reproducci n normal Reproductor de discos compactos Reproduccion de discos compactos 1 Pulse e inserte un CD Con el lado de la etiqueta hacia arriba 2 Cierre e
51. otones num ricos e Cambiar el disco 13 14 Otras operaciones Gire el control VOL para ajustar el volumen Pulse para Pulse para desactivar la unidad Pulse para ajustar el menu de sonido y el volumen Pulse LIST para hacer que se visualicen los nombres memorizados Cambio de la direcci n de funcionamiento La direcci n de funcionamiento de los controles se ha ajustado en f brica como se indica en la siguiente ilustraci n Para disminuir Si necesita montar el mando rotativo en la parte derecha de la columna de direcci n puede invertir la direcci n de funcionamiento de los controles Mantenga pulsada durante dos segundos manteniendo presionado el control VOL Consejo Tambi n es posible cambiar la direcci n de funcionamiento de estos controles con la unidad p gina 15 atenuar el sonido Ajuste de las caracter sticas de sonido Es posible ajustar los graves los agudos el balance y el equilibrio entre altavoces e igualmente almacenar para cada fuente un nivel de graves y agudos 1 Pulse SOUND varias veces para seleccionar el elemento que desee ajustar VOL volumen SUB volumen de potenciaci n de graves BAS graves TRE agudos gt BAL izquierdo derecho FAD delantero trasero 2 Gire el dial para ajustar el elemento seleccionado Realice el ajuste en un intervalo de tres segundos despu s de la selecci n Transcurridos tres
52. play item the disc or track name of the CD TEXT disc is scrolled automatically whether you set the function on or off 1 During playback press SHIFT 2 Press SET UP repeatedly until A SCRL appears 3 Press gt to select A SCRL ON 4 Press GGHIFT To cancel Auto Scroll select A SCRL OFF in step 3 above Note For some CD TEXT discs with very many characters the following cases may happen Some of the characters are not displayed Auto Scroll does not work Tip To manually scroll the long name of a CD TEXT disc after activating the Auto Scroll function press SHIFT then lt manual scroll Locating a specific track Automatic Music Sensor AMS During playback push the SEEK AMS control up or down and release for each track you want to skip To locate succeeding me tracks To locate preceding tracks maaa Locating a specific point in a track Manual Search During playback push the SEEK AMS control up or down and hold Release when you have found the desired point r peata SEEK AMS To search forward To search backward Note lf oo or 4 47 7 appearsin the display that means you have reached the beginning or the end of the disc and you cannot go any further Playing a CD in various modes You can play CDs in various modes e REP Repeat Play repeats the current track e SHUF Shuffle Play plays all the tracks in rando
53. r sticas de los altavoces potenciadores de graves conectados podr desactivar las se ales de frecuencia media y alta no deseadas que se introducen en dichos altavoces 1 Presione para seleccionar una fuente radio CD o MD 2 Presione y despu s G SET UP varias veces hasta que aparezca LPF 3 Presione gt o varias veces para seleccionar el ajuste que desee Cada vez que presione gt 0 la frecuencia de corte que aparece en el visor cambiar de la siguiente forma LPF OFF lt LPF 80 HZ lt gt LPF 120 HZ 4 Presione GHIFT Una vez finalizado el ajuste de la frecuencia el visor volver a mostrar el modo de reproducci n normal Equipo opcional Unidad de CD MD Es posible controlar un maximo de siete unidades externas de CD MD con esta unidad con la siguiente configuraci n Unidades de CD m ximo de cinco Unidades de MD m ximo de cinco Cualquier combinaci n de hasta siete unidades funcionar Si conecta una unidad opcional de CD con la funci n CD TEXT el visor mostrar la informaci n CD TEXT al reproducir discos CD TEXT Reproducci n de discos compactos CD o de minidiscos MD 1 Pulse SOURCE varias veces para seleccionar CD o MD 2 Pulse hasta que aparezca la unidad que desee Se inicia la reproducci n de CD MD Si una unidad de CD MD se encuentra conectada todos los temas se reproducen desde el principio Cambio de la indicaci n del
54. ris reia aene 7 CD Player Listening to a CD esinin 8 Playing a CD in various modes cecccncnnacnornnncaos 9 Radio Memorising stations automatically Best Tuning Memory BTM n se 10 Memorising only the desired stations 10 Receiving the memorised stations i 10 Storing the station names Station MEMO sssini 11 Locating a station by name LIS ninia ia 12 Other Functions Labelling the rotary commander mnncocinnnono 13 Using the rotary commander 18 Adjusting the sound characteristics 14 Attenuating the sound uo 14 Changing the sound and display settings 15 Boosting the bass sound A E E 15 Adjusting the frequency of the speakers and the subwoofer s occicicicononnonincnnononononcncnnono 16 With Optional Equipment CD MD Unit Playing a CD or MD a ioa eiiieaen Playing tracks repeatedly Repeat Play cocino ricas Playing tracks in random order Shuffle Playita Labelling a CD Disc Memo erisin Locating a disc by name List Up iii ie nin Selecting specific tracks for playback eT E O E E Additional Information BreCa titi Oms ee s caracte tordos Maintenance Dismounting the unit Specifications saiaren Troubleshooting guide 00 Location of controls Refer to the pages for details o o BO NO SEEK AMS seek Automatic M usic Sensor manual search control 9 10 11 18 20 MODE band unit select button
55. rriba o abajo y su ltelo para buscar la emisora sintonizaci n autom tica La exploraci n se detiene cuando la unidad recibe una emisora Desplace el control SEEK AMS hacia arriba o abajo varias veces hasta recibir la emisora que desee Nota Si la sintonizaci n autom tica se detiene con demasiada frecuencia pulse y a continuaci n PLAY MODE varias veces hasta que el visor muestre LOCAL modo de b squeda local A continuaci n pulse gt para seleccionar LOCAL ON Pulse SHIFT S lo se sintonizar n las emisoras de se al relativamente intensa Consejo Si conoce la frecuencia de la emisora que desea escuchar desplace el control SEEK AMS hacia arriba o abajo y mant ngalo en esta posici n hasta que aparezca la frecuencia deseada sintonizaci n manual Si la recepci n de FM en est reo es de mala calidad Modo monof nico 1 Durante la recepci n de la radio pulse y a continuaci n 4 PLAY MODE varias veces hasta que aparezca MONO 2 Pulse gt varias veces hasta que aparezca MONO ON El sonido mejorar aunque ser monof nico la indicaci n ST desaparecer 3 Pulse SHIFT Para volver al modo normal seleccione MONO OFF en el anterior paso 2 Cambio de la indicaci n del visor Cada vez que pulse DSPL el elemento cambiar de la forma siguiente Frecuencia gt Reloj Despu s de si seleccionar el elemento que desee el visor cam
56. segundos la funci n del dial vuelve a ser la de control de volumen Atenuaci n del sonido Pulse en el mando rotativo o en el inal mbrico opcionales La indicaci n ATT ON parpadea moment neamente Para restaurar el nivel de volumen anterior vuelva a pulsar ATT Consejo La unidad reducir autom ticamente el volumen cuando entre una llamada telef nica funci n ATT para tel fono Cambio de los ajustes de sonido y visualizacion Es posible ajustar los siguientes elementos e CLOCK Reloj p gina 7 e D INFO Informaci n dual que permite mostrar simult neamente el reloj y el modo de reproducci n ON o la informaci n de forma alternativa OFF e AMBER GREEN que permite cambiar el color de iluminaci n entre mbar o verde e DIM Atenuador que permite cambiar el brillo del visor Seleccione ON para atenuar el brillo del visor e BEEP que permite activar o desactivar los pitidos e RM Mando rotativo para cambiar la direcci n de funcionamiento de los controles del mando rotativo opcional Seleccione NORM para utilizar el mando rotativo seg n la posici n ajustada en f brica Seleccione REV si monta el mando rotativo a la derecha de la columna de direcci n e HPF Filtro de paso alto e LPF Filtro de paso bajo e M DSPL Desplazamiento de indicaciones para activar o desactivar el desplazamiento de indicaciones por el visor e A S
57. sualizaci n en la p gina 15 Desplazamiento autom tico del t tulo de un disco Desplazamiento autom tico Si el t tulo del disco nombre del cantante o t tulo de tema de un disco CD TEXT tiene m s de 8 caracteres y la funci n de desplazamiento autom tico se encuentra activada la informaci n se desplaza autom ticamente por el visor tal como se muestra a continuaci n El t tulo del disco aparece al cambiar ste si se ha seleccionado el t tulo de disco El t tulo del tema aparece al cambiar ste si se ha selecdonado el t tulo de tema Si pulsa para cambiar el elemento mostrado el t tulo del disco o del tema del disco CD TEXT se desplaza autom ticamente tanto si activa como si desactiva la funci n 1 Durante la reproducci n pulse SHIFT 2 Pulse SET UP varias veces hasta que aparezca A SCRL 3 Pulse gt para seleccionar A SCRL ON 4 Pulse GHIFT Para cancelar la funci n de desplazamiento autom tico seleccione A SCRL OFF en el paso 3 anterior Nota Con algunos discos CD TEXT con un gran n mero de caracteres pueden producirse las siguientes situaciones Algunos de los caracteres no se muestran La funci n de desplazamiento autom tico no funciona Consejo Para desplazarse manualmente por un t tulo largo de un disco CD TEXT despu s de activar la funci n de desplazamiento autom tico pulse y a continuaci n desplazamien
58. t playback CD indication Elapsed playing time Lt E A Track number Note To play back an 8 cm CD use the optional Sony compact disc single adapter CSA 8 To Press Stop playback OFF Eject the CD then 4 Changing the display item Each time you press during CD or CD TEXT disc playback the item changes as follows v Track number Elapsed playback time v Disc name Artist name v Track name v Clock 1 f you inserted a non CD TEXT disc NO NAME appearsin the display 2 If you play a CD TEXT disc the artist name appearsin the display after the disc name Only for CD TEXT discs with the artist name After you select the desired item the display will automatically change to the Motion Display mode after a few seconds In the Motion Display mode all the above items are scrolled in the display one by one in order Tip The Motion Display mode can be turned off See Changing the sound and display settings on page 15 Automatically scrolling a disc name Auto Scroll If the disc name artist name or track name on a CD TEXT disc exceeds 8 characters and the Auto Scroll function is on information automatically scrolls across the display as follows e The disc name appears when the disc has changed if the disc name is selected e The track name appears when the track has changed if the track name is selected If you press to change the dis
59. t cover is removed a 3 Use a thin screwdriver to push in the clip on the left side of the unit then pull out the left side of the unit until the catch clears the mounting 23 24 Specifications CD player section General System Compact disc digital audio Outputs system Signal to noise ratio 90 dB Frequency response 10 20 000 Hz Wow and flutter Below measurable limit Tuner section Tone controls FM Tuning range FM tuning interval Power requirements 50 kHz 200 kHz f switchable Dimensions 87 5 108 0 MHz at 50 kHz step Mounting dimensions 87 5 107 9 MHz at 200 kHz step Mass Aerial terminal External aerial connector Supplied accessories Intermediate frequency 10 7 MHz Usable sensitivity 12 dBf y Selectivity 75 dB at 400 kHz Optional accessories Signal to noise ratio 65 dB stereo 68 dB mono Harmonic distortion at 1 kHz 0 7 stereo 0 5 mono Line outputs 2 Power aerial relay control lead Power amplifier control lead Telephone ATT control lead Bass 8 dB at 100 Hz Treble 8 dB at 10 kHz 12 V DC car battery negative earth Approx 178 x 50 x 185 mm w h d Approx 182 x 53 x 162 mm w h d Approx 1 2 kg Parts for installation and connections 1 set Front panel case 1 Rotary commander RM X4S Wireless remote RM X47 BUS cable supplied with an RCA pin cord RC 61 1 m RC 62 2 m Cleaning cloth XP CD1 Compact disc single adapter CSA 8 CD changer 10 discs CDX
60. to manual Localizaci n de un tema espec fico Sensor de m sica autom tico AMS Durante la reproducci n desplace el control SEEK AMS hacia arriba o abajo y su ltelo por cada tema que desee omitir Para localizar temas eee posteriores Y Para localizar temas anteriores La Localizaci n de un punto espec fico de un tema B squeda manual Durante la reproducci n desplace el control SEEK AMS hacia arriba o abajo y mant ngalo en esta posici n Su ltelo cuando encuentre la parte que desee fe lt lt SEEK AMS Para buscar hacia delante Para buscar hacia atr s Nota S LLLL o 71 717171 aparece en el visor significa que ha alcanzado el principio o el final del disco y no ser posible pasar al siguiente Reproducci n de discos compactos en diversos modos Es posible reproducir discos compactos en los siguientes modos e Reproducci n repetida REP que permite repetir el tema actual e Reproducci n aleatoria SHUF que permite reproducir todos los temas en orden aleatorio Reproducci n repetida de temas Reproducci n repetida 1 Pulse durante la reproducci n Cada vez que pulse SHIFT se iluminar n s lo los elementos que pueden seleccionarse OFF REP SHUF o o o o o o o SHIFT 1 2 03 4 5 6 2 Pulse 7 REP varias veces hasta que aparezca REP 1 SETUP PLAY MODE REP SHUF Se inicia la reproducci n repetida 3 Pulse GHD
61. uno por orden Consejo Es posible desactivar el modo de desplazamiento de indicaciones por el visor consulte Cambio de los ajustes de sonido y visualizaci n en la p gina 15 Desplazamiento autom tico del t tulo de un disco Desplazamiento Autom tico Si el t tulo del disco nombre del artista o t tulo de tema de un disco CD TEXT o MD tiene m s de 8 caracteres y la funci n de desplazamiento autom tico est activada la informaci n se desplazar autom ticamente por el visor de la siguiente forma El t tulo del disco aparece al cambiar ste si se ha seleccionado el t tulo de disco El t tulo del tema aparece al cambiar ste si se ha seleccionado el t tulo de tema Si pulsa para cambiar el elemento mostrado el t tulo del disco o del tema del MD o del disco CD TEXT se desplaza autom ticamente tanto si activa como si desactiva la funci n contin a en la p gina siguiente gt 17 1 Pulse durante la reproducci n 2 Pulse gt SET UP varias veces hasta que aparezca A SCRL 3 Pulse gt para seleccionar A SCRL ON 4 Pulse GHIFT Para cancelar la funci n de desplazamiento autom tico seleccione A SCRL OFF en el paso 3 anterior Nota Con algunos discos CD TEXT con un gran n mero de caracteres pueden producirse las siguientes situaciones Algunos de los caracteres no se muestran La funci n de desplazamiento autom tico n
62. visor Cada vez que pulse durante la reproducci n de CD CD TEXT o MD el elemento cambiar de la siguiente forma v N mero de tema Tiempo de reproducci n transcurrido v T tulo de disco Nombre del cantante v T tulo de tema v Reloj 1 Si no ha asignado ninguna etiqueta al disco o no hay ning n t tulo de disco previamente grabado en el MD aparece la indicaci n NO NAME en el visor 2 Si reproduce un disco CD TEXT el nombre del cantante aparecer en el visor despu s del t tulo del disco S lo para discos CD TEXT con nombre del cantante 3 Si el t tulo del tema de un disco CD TEXT o de un MD no se ha registrado previamente el visor mostrar NO NAME Puede asignar un nombre personalizado para discos CD y CD TEXT con la funci n de memorando de discos Consulte Asignaci n de t tulos a los discos compactos p gina 19 No obstante si utiliza nombres personalizados siempre tendr n prioridad sobre la informaci n CD TEXT original al mostrarse tal informaci n Consejo Si desea mostrar la informaci n original CD TEXT despu s de asignar una etiqueta personalizada a un disco CD TEXT pulse y a continuaci n gt Despu s de si seleccionar el elemento que desee el visor cambiar autom ticamente al modo de desplazamiento de indicaciones por el visor transcurridos unos segundos En este modo todos los elementos anteriores se despazan por el visor de uno en
63. y In this case remove the disc and wait for about an hour until the moisture evaporates When you play 8 cm CDs Use the optional Sony compact disc single adapter CSA 8 to protect the CD player from damage Maintenance Fuse replacement When replacing the fuse be sure to use one matching the amperage rating started on the original fuse If the fuse blows check the power connection and replace the fuse If the fuse blows again after replacement there may be an internal malfunction In such a case consult your nearest Sony dealer Fuse 10 A Warning Never use a fuse with an amperage rating exceeding the one supplied with the unit as this could damage the unit Cleaning the connectors The unit may not function properly if the connectors between the unit and the front panel are not clean In order to prevent this open the front panel by pressing COPEN then detach it and clean the connectors with a cotton swab dipped in alcohol Do not apply too much force Otherwise the connectors may be damaged Main unit Back of the front panel Notes e For safety turn off the engine before cleaning the connectors and remove the key from the ignition switch e Never touch the connectors directly with your fingers or any metal device Dismounting the unit 1 Press the clip inside the front cover with a thin screwdriver and gently pry the front cover free E 2 Repeat step 1 on the left side The fron
Download Pdf Manuals
Related Search
Related Contents
Manual de Utilização BB2 Central Unit - Cerlic Enviromental Controls User Manual - L MESA MSC2120ECSD Installation Guide : Free Download, Borrow, and Streaming : Internet Archive FMDS User Manual - ETS MANUAL DO USUÁRIO Philips USB 2.0 cable SWU2181N CÉAS-point-com n° 552 du vendredi 30 mai 2014 Copyright © All rights reserved.
Failed to retrieve file