Smeg ALFA41XE2 Instruction Manual
Contents
1. cooking and the program selected It is possible to start cooking early before the preheating temperature is reached by keeping the START button pressed for 3 seconds During cooking it is possible to modify the temperature by turning the knob to the or 6 symbols it will continue with the new setting after 3 seconds During the last minute of cooking only the countdown of the remaining 60 seconds will be displayed At the end a beep and the text End flashing for 20 minutes will indicate that cooking has been completed At the end of the cooking operation to perform the same program again press the START button once more To return to the OFF status keep the STOP button pressed for 4 seconds The parameters set for the program are deleted me Instructions for the User 4 6 Preheating with delayed start The program with delayed pre heating is set as follows e Turn the knob to the or symbols to select the program P39 e Press the PUSH button for at least 3 seconds the display shows the current hour flashing e Turn the knob to the or symbols to set the current hour e Press the PUSH button the display will show the minutes flashing e Turn the knob to the or symbols to set the minutes e Press the PUSH button the display will show the temperature flashing e Turn the knob to the or symbols to set the temperature e Press the PUSH but2. PEAN DIRECTIVE 2002 96 EC ON WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT WEEE THIS GUIDELINE IS THE FRAME OF A EUROPEAN WIDE VALIDITY OF RETURN AND RECYCLING ON WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT The manufacturer declines all responsibility for damage to persons or things caused by the non observance of the above prescriptions or deriving from tampering with any part of the appliance or by the use of non original spares INFORMATION FOR USERS Pursuant to Directives 2002 95 EC 2002 96 EC and 2003 108 EC relating to the reduction of the use of hazardous substances in electrical and electronic appliances as well as to the disposal of refuse The crossed out bin symbol on the appliance indicates that the product at the end of its useful life must be collected separately from other refuse Therefore the user must consign the product that has reached the end of its working life to the appropriate selective collection centres for electrical and electronic refuse or deliver it back to the retailer when purchasing an equivalent product on a one for one basis Adequate selective collection for the subsequent forwarding of the decommissioned product to recycling treatment and ecologically compatible disposal contributes to avoiding possible negative effects on the environment and on health and promotes the recycling of the materials of which the appliance consists The illicit disposal of the product by the user results in the application o
3. TE MATERIALS AND TAKE THEM TO THE NEAREST SELECTIVE WASTE COLLECTION CENTRE THE APPLIANCE MUST BE CONNECTED TO EARTH IN COMPLIANCE WITH ELECTRICAL SYSTEM SAFETY REGULATIONS w WHEN LINKING UP TO MAINS BY PLUG AND SOCKET MAKE SURE THAT BOTH ARE COMPATIBLE AND CONNECT BY MEANS OF A POWER CABLE COMPLYING WITH APPLICABLE REGULATIONS NEVER UNPLUG BY PULLING ON THE CABLE anA DO NOT OBSTRUCT VENTILATION OR HEAT DISPERSAL OPENINGS IMMEDIATELY AFTER INSTALLATION CARRY OUT A BRIEF INSPECTION TEST OF THE OVEN FOLLOWING THE INSTRUCTIONS BELOW SHOULD THE APPLIANCE NOT FUNCTION DISCONNECT IT FROM THE POWER SUPPLY AND CALL THE NEAREST TECHNICAL ASSISTANCE CENTRE NEVER ATTEMPT TO REPAIR THE APPLIANCE NEVER PUT INFLAMMABLE OBJECTS IN THE OVEN IF IT SHOULD ACCIDENTALLY BE SWITCHED ON THIS MIGHT CAUSE A FIRE THE APPLIANCE BECOMES VERY HOT DURING USE SUITABLE HEAT PROOF GLOVES SHOULD BE WORN FOR ALL OPERATIONS THE ID PLATE WITH TECHNICAL DATA SERIAL NUMBER AND BRAND NAME IS POSITIONED VISIBLY ON THE SIDE OF THE OVEN DO NOT REMOVE THIS PLATE FOR ANY REASON 19 20 Instructions for safety and use THE APPLIANCE IS DESIGNED FOR PROFESSIONAL USE BY TRAINED PERSONS DO NOT ALLOW CHILDREN TO GO NEAR IT OR PLAY WITH IT TRAYS MUST BE WASHED BEFORE USE WITH A SUITABLE KITCHENWARE DETERGENT DO NOT USE ABRASIVE PRODUCTS THE OVEN IS DESIGNED FOR A MAXIMUM LOAD OF 3 5 KG THIS APPLIANCE IS MARKED ACCORDING TO THE EURO
4. ae ay Contents INSTRUCTIONS FOR SAFETY AND USE 008 19 OVEN INOTACELA TION Renee et et eer rT 21 DESCRIPTION OF CONTROLS cceeeeeeteeeeeeeeees 23 STG THE OVEN e uae 24 CLEANING AND MAINTENANCE nssssneenssesnnnsneenesesennnnes 29 EXTRAORDINARY MAINTENANCE 0 cceeeeee eters 31 x INSTRUCTIONS FOR THE USER these contain user advice description of the commands and the correct procedures for cleaning and maintenance of the appliance INSTRUCTIONS FOR THE INSTALLER these instructions are intended X for the qualified technician who must perform the installation put it into operation and test the appliance Instructions for safety and use 1 INSTRUCTIONS FOR SAFETY AND USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE IT MUST BE KEPT IN ITS ENTIRETY AND IN AN ACCESSIBLE PLACE FOR THE WHOLE WORKING LIFE OF THE OVEN WE URGE YOU TO READ THIS MANUAL AND ALL THE INFORMATI ON IT CONTAINS CAREFULLY BEFORE USING THE OVEN INSTALLATION MUST BE CARRIED OUT BY QUALIFIED PERSONNEL IN ACCORDANCE WITH THE REGULATIONS IN FORCE THIS OVEN IS INTENDED FOR PROFESSIONAL USE AND CONFORMS TO THE EEC DIRECTIVES CURRENTLY IN FORCE THE APPLIANCE HAS BEEN BUILT TO CARRY OUT THE FOLLOWING FUNCTIONS COOKING AND HEATING UP OF FOOD ALL OTHER USES ARE CONSIDERED IMPROPER THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR IMPROPER USE DO NOT DISCARD PACKING IN THE HOME ENVIRONMENT SEPARATE THE VARIOUS WAS
5. duration of the cooking operation 24 Instructions for the User me 4 USING THE OVEN 4 1 Warnings and general advice When using the oven for the first time heat it up to its maximum temperature for a duration long enough to burn off any oily residues from the manufacturing process To access food always leave the door open as short a time as possible to prevent the temperature in the oven from falling and ruining the food 4 2 Choice of programs This appliance allows you select 40 cooking programs including e 38 programs that can be edited and saved as the user wishes e 1 manual program P40 e 1 preheating program with delayed start P39 4 3 Editing saving a program The oven has 38 programs that can be modified by the user from P01 to P38 To set the operational parameters of a program e Turn the knob to the or symbols to select the program you wish to save edit e Keep the PUSH knob pressed for 3 seconds the display will show the cooking temperature e Turn the knob to the or symbols to set the cooking temperature e Press the PUSH knob the display will show the cooking time e Turn the knob to the or symbols to set the cooking time from 1 to 99 min e Press the PUSH knob to exit from the data setting and saving phase The message PEnd will appear on the display and the parameters will be saved e After 3 seconds the display will show
6. f administrative sanctions Instructions for the installer CGB 2 OVEN INSTALLATION The oven must be installed on a free standing horizontal work top The distance from the rear wall must allow easy access to the terminal board for connection of the power supply cable Installation must be carried out by a qualified technician and in compliance with EEC DIRECTIVES currently in force 2 1 Positioning For correct operation you must not place products on top of each other If several products are installed side by side maintain a minimum distance of 10 mm between each of them as shown in the figure 2 2 Electrical connection Make sure the voltage and the cross section of the power cord match the specifications indicated on the identification plate positioned on the side of the oven Do not remove this plate for any reason The oven is fitted with an HO7RN F three core cable for operation at 220 240V and a power supply plug The supplied cable is a HO7RN F 3 x 1 5 mm three core cable The power supply cable must be replaced by the manufacturer or by an authorised service centre to prevent any risks The terminal marked with this symbol connects parts together that are normally at zero potential Connect the appliances appropriately using this terminal in order to make sure that they are equipotential The plug and wall mounted socket must be of the same type in accordance with CEI reg
7. he STOP button we Instructions for the User 5 CLEANING AND MAINTENANCE Important do not aim jets of water directly against the oven avoid the use of pressure jets Before performing any operations switch off the power supply to the oven 5 1 Cleaning stainless steel ES To keep stainless steel in good condition it should be cleaned regularly at Eq the end of the day Let it cool first 43 BEA To clean and preserve the stainless steel surfaces always use only specific products that do not contain abrasives or chlorine based acids How to use pour the product onto a damp cloth and wipe the surface rinse thoroughly and dry with a soft cloth or deerskin Do not use metallic sponges or sharp scrapers they will damage the surface Use ordinary non abrasive products for steel with the aid of wooden or plastic utensils if necessary p Rinse thoroughly and dry with a soft cloth or deerskin D D 29 Instructions for the User ome 5 2 Cleaning the oven interior a To keep the oven in good condition it should be cleaned regularly at the aN end of the day Let it cool first Take out all removable parts EN e Clean the oven racks and side runners with hot water and non abrasive detergent Rinse and dry 5 3 Door glazing The glass in the door should always be kept thoroughly clean Use absorbent kitchen roll in case of stubborn dirt remove with a damp sponge and an ordinary detergent 30 we I
8. nstructions for the User 6 EXTRAORDINARY MAINTENANCE The oven may require extraordinary maintenance or replacement of parts subject to wear such as seals bulbs and so on The following instructions describe how to carry out these minor maintenance operations Before performing any operations switch off the power supply to the oven 6 1 Changing the light bulb Remove the bulb protector A Replace the bulb B with a similar one Re fit the bulb protector A oy Use only oven bulbs T 300 C 31 32 Instructions for the User me 6 2 Removing the door Hinges with mobile connecting plates Catch the door at the two sides with both hands in proximity to hinges C and lift up the small levers D Raise the door to an angle of about 45 and remove it To reassemble fit the hinges C into their grooves then lower the door into place and release the levers D removed Before removing the seal take off the door as described above Once the door has been taken off lift the tabs at the corners as shown in the figure a Ss
9. possible to extend it manually e While the display is showing the message End press the START button the text tP00 will appear on the display e Turn the knob to the or symbols to set the additional minutes of cooking at most 20 extra minutes are allowed e To start cooking with the extra time that has just been set press the START button for at least 2 seconds e Atthe end of cooking the text End will continue to flash for the next 20 minutes and the oven light will remain on 25 26 Instructions for the User ome 4 5 Manual cooking The manual program is P40 and can be edited by the user but does not save the cooking parameters set in memory To select this program proceed as follows Save the program temporarily as described in chapter 4 3 Editing saving a program Unlike saved programs the cooking time can be set to infinite the display will show the text InF After saving it do NOT return to the OFF condition Press the START button The appliance will perform a pre heating cycle showing the text PrEh on the display When preheating is finished a series of beeps lasting 3 seconds indicate that is possible to proceed with the cooking operation The text PrEh will flash on the display To start the cooking keep the START button pressed for 2 seconds The display will show in order the temperature set the time remaining until the end of
10. the parameters set in rotation e To return to the OFF status keep the STOP button pressed for 4 seconds me Instructions for the User 4 4 Running a program From the OFF status proceed as follows e Turn the knob to the or symbols to select one of the available programs from P01 to P38 The display will show the parameters of the selected program in rotation e To start the program press the START button The appliance will perform a preheating cycle showing the message PrEh on the display e When preheating is finished a series of beeps lasting 3 seconds indicate that is possible to proceed with the cooking operation The message PrEh will flash on the display e To start the cooking keep the START button pressed for 2 seconds The display will show in order the temperature set the time remaining until the end of cooking and the program selected e It is possible to start the cooking early before the preheating temperature is reached by keeping the START button pressed for 3 seconds e During the last minute of cooking only the countdown of the remaining 60 seconds will be displayed At the end a beep and the text End flashing for 20 minutes will indicate that the cooking has been completed e To return to the OFF status keep the STOP button pressed for 4 seconds 4 4 1 Extending a cooking operation When a cooking operation finishes it is
11. ton the display will show the cooking start hour flashing e Turn the knob to the or symbols to set the cooking start hour e Press the PUSH button the display will show the minutes flashing e Turn the knob to the or symbols to set the minutes e Press the PUSH button to exit from the data setting and saving phase The text PEnd appears on the display and after 3 seconds it will display P39 the temperature and the pre heating start time in succession e To start the program press the START button for at least 2 seconds The display will show the current time and P39A in succession until the program is activated at the set time The oven will perform preheating at the set time during this phase the display shows P39 the text InF and the set temperature in succession this will continue until interrupted by the STOP button The program must be activated every day To reactivate it press the START button for at least 2 seconds 27 28 Instructions for the User me 4 7 Rapid cooling The oven is equipped with a special function that allows the oven interior to be cooled rapidly To activate it when the display shows the text OFF open the door and press the START button for at leasts 4 seconds This will activate the internal motor fan the heating elements are switched off and the display shows the text To stop the function press t
12. ulations Make sure that the supply line is suitably earthed Avoid use of adapters and shunts 21 _ CGB Instructions for the installer X 2 2 1 Safety thermostat The oven is equipped with a safety device that takes action in case of serious malfunction To re arm the safety device you must contact the technical assistance service things caused by the non observance of the above prescriptions or The manufacturer declines all responsibility for damage to persons or deriving from tampering with any part of the appliance 2 3 Levelling Level the oven on the ground using the four adjustable feet In order to adjust them loosen the lock nut and unscrew the foot The adjustment screws have a range of 10 mm 2 4 Steam outlet pipe An exhaust pipe is fitted on the back of the oven to allow the discharge of steam during cooking Make sure the pipe is not obstructed Avoid crushing them 22 me Instructions for the User 3 DESCRIPTION OF CONTROLS START BUTTON This button lets you start cooking operations or perform a rapid cooling cycle when they are finished In the steam model it starts the humidification cycle STOP BUTTON This button lets you stop cooking at any time DISPLAY Allows to view the selected program and the cooking parameters of the selected program PROGRAM SELECTION KNOB Allows to set the cooking operation using one of the preset programs to select the temperature and
Download Pdf Manuals
Related Search