Home

Smeg 129316 Instructions for Use

image

Contents

1. Tumble Dryer 9LEGZL Thank you for your trust and for buying our tumble drier We congratulate you on your wise decision This appliance is designed for drying clothes for home use only The dryer enables quick drying of your laundry leaving it soft and tender without affecting its shape Our appliances are environmentally friendly some of the materials are recyclable while others are disposed of and destroyed To protect the environment dispose of your appliance by delivering it to the authorized dealer The appliance is intended exclusively for use in households If the appliance is used for professional purposes for profit or for purposes beyond regular use in a household or if appliance is used by a person who is not a consumer the warranty period equals the shortest warranty period possible as stipulated by the relevant legislation Appliance description c cccccssessseseeeseeeeees 3 Warning Saci a a 4 Installation and connection cccceceeeeeeeeeeees 6 Operatli Mean E 10 Tips for drying and for economic use of the AE e E E A E E 15 Cleaning and maintenance cccssseceeeees 16 POUDIE S zirenena a E 19 TADIS d 21 Appliance description Front panel Water container Door mh OWON Technical data depending on model Drying program button Condenser Evacuation slots Cooling air slot Legs ald Dimensions of the appliance w xd x h 600 mm x 600 mm x 85
2. functioning If the plug is correctly inserted into the socket If the door is closed tightly press it towards the appliance If the program runs according to instructions If the container is full only with condensation dryer lf appropriate drying time is selected If the filter is clean If the condensation device is clean only with condensation dryer If the room is adequately ventilated If the amount of laundry to be dried is not too big If the evacuation tube is too long only with evacuation dryer max 2 m If the laundry loaded in the drum has not been spun enough or if appropriate drying time has been set If the room is too hot over 25 C applies for condensation dryer If the room temperature is too high If the condensation device is clean 129316 9LEGZL Unevenly dried e If the amount of laundry to be dried is not too big laundry e If there are only large pieces of laundry large and small pieces should be dried together e If different fabrics are dried together group the laundry according to the type of fabrics The machine signals errors or failures in operation by flashing signal LED s Record number of flashes representing the failure shut the machine off and call nearest authoriyed service If a failure occurs due to incorrect installation or inappropriate use of the appliance the guarantee is void and the repair bill shall be settled by the user Program ch Type la
3. to ensure that the items are left at a temperature that ensures that the items will not be damaged Before connecting the appliance read these instructions carefully Repairing the failure arising from inappropriate connections or use of the appliance is not covered by the guarantee The belt can be replaced by a servising engineer only who incorporates an Original spare part with the marking OPTIBELT EPH 1906 code 104265 OPTIBELT 8 EPH 1941 code 160165 depending on model The symbol on the product or on its et packaging indicates that this product m may not be treated as household waste Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of thisproduct For more detailed information about recycling of this product please contact your local city office your household waste disposal service or the shop where you purchased the product A Never stop a tumble dryer before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated 129316 9LEGZL Removing wrapping Selecting the appropriate location of the appliance A Nv i e Packaging mater
4. laundry since drying makes it soft and tender e Drying time is much shorter and consequently the energy consumption lower if laundry is well spun prior tumble dring minimum 1000 spin RPM e By selecting the most suitable drying program you will avoid over drying and defficult ironing e By cleaning the filter on regular basis drying time is shorter and consumes less energy 129316 9LEGZL Cleaning the filter i gt W ae Cleaning the condensation dryer e After every drying clean the filter located in the inner part of the door e Lift the filter lid Fig e Pull your fingers over the filter to remove fibers and threads lining Replace the filter cover e f necessary also clean the filter housing and door sealing Cleaning of the filter on the lower side of the door opening only with some models Before removing clothes from the drum clean the filter on the lower side of the door opening with a damp cloth or wet hand If the filter is clogged in such way that it needs washing pull it out from its bed Fig wash it under hot water and dry Be sure that the replaced filter snaps Safely to its position and only then close the filter lid If the filter is not regularly cleaned the airflow is obstructed which causes longer drying time and danger of overheating AN Empty the container and occasionally clean the water condensation device Emptying the water containere Empty the cont
5. two appliances decorative plate is available on request against payment Do not place the appliance behind lockable door sliding door and door with hinges on the opposite side of the appliance Place the appliance in the room in such way to ensure free opening of the drier door e Level the machine longitudinally and transversally by rotating the adjustable feet thus enabling the leveling by 1 cm A Vibrations moving of the appliance and loud operation due to incorrect setting of the adjustable feet shall not be covered by this warranty A The appliance should be placed on a surface with concrete base the surface should be dry and clean in order to prevent slipping The adjustable feet should also be cleaned before installation Do not place the dryer on a thick carpet since this could obstruct the air circulation 129316 9LEGZL Moist air outlet A Evacuation dryer e There are two openings for the evacuation of humid air One of them should be closed with the supplied lid while the other should be connected to the evacuation tube 1 Lid 2 Evacuation tube The distance between the dryer and the moist air outlet ventilation shaft window should not exceed 2 meters otherwise water can accumulate in the tube B Condensation dryer pa e Moisture from laundry is extracted in the water A condensation device and Is either collected in the receptacle or discharged directly into t
6. 0 mm Weight net evacuation dryer 34 kg condensation dryer 42 kg Nominal voltage 230 V 50 Hz Connecting power 2900 W Max load 6 kg 7 kg Connection power cord 230 V 50 Hz min 16 A Fuse 16A Heater 2600 W Name plate with technical information for the appliance is located under the door frame 129316 9LEGZL e Use the dryer to dry only the laundry washed with water Do not attempt to dry the laundry washed or cleaned with flammable detergents or solutions gasoline trichloroethylene etc as it may cause explosion e Do not let the children play with the appliance Prevent your children or pets to enter the dryer drum e When discarding the old appliance remove the power cord and breka the lock so that the door can not be locked safety precautions for children e After cleaning replace the condenser to the air channel Operating the appliance without the condenser or with a damaged condenser may cause fire e Rear wall of the appliance may be hot for condenser drier only danger of burns e Clean filter after each drying If you pulled the filter out always reinsert it before the next drying operation e After use always turn the appliance off the program selection jog A should be in position O and unplug the power cord e Close the dryer door prior pulling out the water container e Leave all repairs to a qualified technician Tampering with the appliance or reparations by an unqualifie
7. ainer after every drying procedure pull the container out pull out the draining nozzle pour out the water and replace the container AN Water from condenser tank is not drinkable If filtered it may be used for ironing Cleaning of evacuation drier Cleaning the water condensation device a aon 2 a q AN Strictly switch the appliance off prior cleaning unplug the power cord from the wall socket or turn the selector jog to the position 0 e Clean the casing and drum interior with soft cloth and mild detergent e Periodically clean vacuum the interior of air evacuation opening and evacuation tube Water condensation device should be cleaned three to four times a year in case of very frequent use even more often During cleaning a certain amount of water may drip out so it is good to put an absorbing cloth below the opening e Open the exterior lid of the condenser by grabbing the handle on the lower left part of the appliance housing and pull it downwards e Remove the interior lid by first turning the lever vertically down then tilt the lid towards yourself and remove it e Turn the lock on the condenser upwards and pull the condenser out by pulling the lever e Clean the device from both sides with lukewarm water and drain it well e Before replacing it into its slot clean the air channel in which the device is mounted and the gasket at the interior lid e Lock the condenser into its
8. d Changing the program or the functions If you wish to change the drying time during the drying procedure move button A to the position 0 for about 1 second set new drying time and press the START PAUSE button D The same procedure applies if you wish to change settings selection of functions by means of buttons Door opened If the door is opened during the drying process this will pause the operation the E LED flashes intermittently The drying process is resumed by closing the door and pressing the START PAUSE button D from the point where it had been interrupted e Power failure If a power failure occurs during the operation of the dryer this requires that drying time is reset again and all extra functions are reselected LED E flashes as at the commencement of the program 129316 9LEGZL e Water container is full condenser appliance only When the container is full signal lamps E and F are flashing The drying program is interrupted When the container is emptied press the START PAUSE button D to reactivate the drying program Tips for drying and for economic use of the dryer e Drying is economically most effective if you dry the recommended quantity of laundry per one charge see Program Chart e Do not dry the laundry made of especially sensitive fibers wool silk which may shrink or lose shape e It is not necessary to use a fabric conditioner when washing the
9. d person may cause accidents or failures Call the authorized service department see list of authorized service departments e Name plate with technical information about the appliance is located under the door frame e The room must be well aired surrounding air must not contain dusty particles e Room where the appliance is located must be well aired to prevent back flow of gasses released by open fire gas appliances fireplace e The warranty shall not apply to consumables bulbs minor discoloration or deviations of color increased noise level as a consequence of appliance age which does not affect appliance functionality and aesthetical deficiencies which do not affect appliance functionality or safety To reduce the fire hazard always consider the following e Do not dry unwashed items in the tumble dryer e Items that have been soiled with substances as cooking oil acetone alcohol petrol kerosene spot removers turpentine waxes and wax removers should be washed in hot water with an extra amount of detergent before being dried in the tumble dryer e Items such as foam rubber latex foam shower caps waterproof textiles rubber backed articles and clothes or pillows fitted with foam rubber pads should not be dried in the tumble dryer e Fabric softeners or similar products should be used as specified by the fabric softener instructions e The final part of a tumble dryer cycle occurs without heat cool down cycle
10. he drain Y drain height should not exceed 800mm e The signal light indicates that the container is full and should be emptied preferably after each 4 drying cycle Power connection e Use the power cord to connect the dryer to the power supply via wall socket e Rated voltage and other characteristics are indicated on the name plate located under the door frame of the appliance The wall socket should always be within reach It has to be earthed according to the standing regulations If the supply cable is damaged it should only be replaced by a qualified technician 129316 9LEGZL E u A aii FE A program selection jog B lower temperature button C heater off key D START PAUSE button E ON OFF LED F filter alarm water container alarm LED Drying procedure Open the dryer door by pushing the left hand side of the door towards the appliance make sure the drum is empty Sort the laundry according to the type of fabrics Do the buttons and zippers tie the strings and pull out the pockets AN Very delicate laundry should be put in a Coy special protective sack Itis suggested to load the drum with items of different sizes Do not load drip wet laundry into the dryer min 800 rpm A Pay attention to the labels on the clothes indicating the recommending drying mode see table of textile treatment symbols on the last page Operating the d
11. ials are environmentally friendly they can either be recycled safely disposed of or destroyed without any threat to the environment e To be able to do this effectively all materials are marked accordingly A Be careful not to damage cabinet of the appliance with a sharp object when removing the packaging Before connecting the appliance let it warm up to room temperature wait for two hours Ventilation slots and openings on the appliance front and rear wall should not be obstructed A Evacuation dryer e Place the appliance in a well ventilated room with a window or a built in fan e Connect the evacuation tube to the pre prepared Opening e Evacuation must not be connected to air duct used as a chimney for exhaust gasses of appliances using other combustion material B Condensation dryer e Do not place the appliance in a room where there is danger of freezing e Location should be adequately ventilated Room temperature should always be between 0 C and 25 C since frozen water in the condensation container or in the pump may damage the dryer Installation e Appliance can either stand on its own or can be placed on top of a washing machine of the same dimensions minimum width 517 mm depth 476 mm The surface for placing the dryer must be clean and flat Use supplied vacuum feet to prevent sliding of the appliance Washing machine hardtop must be wooden or metallic To conceal the opening between the
12. n hang on washing line and dry Do not drain hang wet and dry Drain lay on a flat surface and dry cE Machine drying not permitted Drying at normal temperature A Drying at lower temperature SP PG1 OEM
13. place e Insert the inner lid to seal well and lock it with a handle e Push the exterior lid towards the appliance to lock to its place 129316 9LEGZL After five drying cycles you need to do the following condenser appliances only e remove clean wash and refit the filters on the interior side of the door and the bottom side of door opening e remove clean wash and refit water condenser e wipe the inside of the water condenser compartment with a damp cloth e wipe the entire back of the water condenser housing with a damp cloth reach deeply into the condenser compartment with your hand to touch the back wall of the compartment e wipe all sealings and sealing surfaces of the condenser condenser housing and condenser door with a damp cloth Trouble Appliance does not work There is current in the socket but the drum is not rolling Laundry is not dry The condensation is inadequate Interferences from the ambient for example electrical wiring could induce signalization of different faults In such cases switch the appliance off and wait for a few seconds plug in the appliance and repeat the drying program If the fault repeats call authorized service shop Warranty shall not apply in case of failures due to interferences from the environment lightning stroke power supply circuit faults natural disasters Check If there is current in the socket and if the fuse is
14. ryer Insert the laundry into the drum prior making sure that the drum is empty Close the dryer door Select drying time e By turning the drying time selector set the preferred drying period according to the type and quantity of laundry and washing machine spin rom see drying program chart Selector jog may be turned in both directions Available time span is from 15 min to 140 minutes LED E is flashing Final 10 minutes of the drying cycle is the cooling period the heater is off e It is also possible to select the ventilation program lasting 20 minutes During this program the heater is off Selection of additional functions Additional functions are selected prior pressing the START button D Decreasing the temperature By pressing the button B the drying temperature is decreased the LED over button is on this way however the drying cycle is longer It is therefore recommended for only drying delicate laundry After the drying is completed the function returns to initial higher temperature iS Heater off Turn the heater off by pressing button C if you wish to dry laundry at room temperature LED above button is on 129316 9LEGZL Drying procedure e Press the START PAUSE button D LED E is on appliance starts to operate after a 2 second pause e 10 minutes prior the end of drying program the machine starts the cooling cycle heater is off
15. un Synthetics Ventilation of dry art Max load in kg 6kg 7kg 7 O possible compulsory Extra functions Revolutions por minuts Eva Con Eva Con 6kg i 7kg 6kg 7kg dry for storage 85 98 120 130 75 89 100 117 1000 rpm 800 rpm ventilation of dry 50 min laundry l iron dry i Level of dryness Anti crease off Note Indicated drying time corresponds to the laundry spun at indicated spin rpm In case of higher or lower spin rpm the times are accordingly shorter or longer Drying time is also prolonged in case of excessively large pieces of laundry 129316 9LEGZL Table of consumption For illustration the chart gives values for 6 7 kg values of testing laundry measured by the EN61121 standard on different RPM of final spin in washing machine program dry for storage Rounds min Remaining moisture Drying time Power consumption in minutes in kWh 7kg 6kg 7kg 6kg 7kg 6kg 7kg 6kg 7kg 70 110 130 120 140 40 46 4 4 5 1 58 92 104 100 117 3 3 3 8 3 7 4 2 50 44 85 98 95 110 31 36 34 i 39 75 89 85 100 28 3 2 3 1 3 6 68 77 74 85 25 29 27 3 1 Measured values may differ from the actual ones due to fluctuations in the type or quantity of laundry spinning power oscillation as well as ambience temperature and humidity o Drying in drier not permitted Drai
16. which prevents excessive creasing e At the end of the cooling program the appliance switches on the anti crease program which lasts for 1 hour periodic tumbling of the drum LED E is flashing e f you open the dryer door the anti crease program is suspended End of drying At the end of drying LED E flashes which means that the drying program is completed LED F is on which for the evacuation type of dryer requires cleaning of filter and for the condensation type cleaning the filter and draining the container e Open the dryer door by pushing the left hand side of the door towards the appliance e Remove the laundry from the dryer e Turn the appliance off by turning the jog selector A to the position 0 e Clean the lint filter see chapter on Cleaning and Maintenance e Close the dryer door e Empty the water container this applies for condensation dryers only see Cleaning and Maintenance and replace it back to its slot e Pull the power lead from the socket disconnecting the appliance from the mains Interruptions e By the user Z After drying be careful when extracting laundry from the appliance as it may be hot Suspending the operation by pressing the START PAUSE button In case you press the START PAUSE button D during the drying procedure the drying program is suspended and with the next press of the same button the program is resumed where it had been interrupte

Download Pdf Manuals

image

Related Search

Related Contents

Chief FSB4210B mounting kit  técnicas de expresión gráfico plástica  DREI UserGuide NECe808 105x146  MANUAL DEL PROPIETARIO DE NEXSTAR 10006  Multiplexx Motorola ES400 (EDA) case  SERVICE MANUAL  MANUAL DEL USUARIO  Window Locks Security Guarantee  Univex Clipper 425621X108 User's Manual  車番認識システム用 赤外線 LED 投光器  

Copyright © All rights reserved.
Failed to retrieve file