SMC Networks SMCWBR 14-GM User's Manual
Contents
1. 192 159 2 1939 DT a My computer The settings of a TCP IP environment include host IP Subnet Mask Gateway and DNS configurations It is not easy to manually configure all the computers and devices in your network Fortunately DHCP Server provides a rather simple approach to handle all these settings This product supports the function of DHCP server If you enable this product s DHCP server and configure your computers as automatic IP allocation mode then when your computer is powered on it will automatically load the proper TCP IP settings from this product The settings of DHCP server include the following items DHCP Server Choose Disable or Enable IP pool starting Address IP pool starting Address Whenever there is a request the DHCP server will automatically allocate an unused IP address from the IP address pool to the requesting computer You must specify the starting and ending address of the IP address pool 21 Wireless Settings File Edit View Favorites Tools Help x ix E A J Search Favorites B wj mg 2 Address C Documents and Settingszsolt MahunkslDestopisMC htm MIMONmdechtm D Gg SMC System WAN LAN Wireless Logout Wireless Setting Network ID SSID default NAT Enable C Disable Firewall DDNS UPnP Tools Status 115 C 11g only Mixed C 11b only2. OOOO m SS SMC SMEWBRI4 GM Borricooe MIMO Networks Wireless Broadband Router SMCWBR14 GM Wireless Broadband Router with MIMO Technology User s Manual Copyright The contents of this publication may not be reproduced in any part or as a whole stored transcribed in an information retrieval system translated into any language or transmitted in any form or by any means mechanical magnetic electronic optical photocopying manual or otherwise without the prior written permission Trademarks products company brand names are trademarks or registered trademarks of their respective companies They are used for identification purpose only Specifications are subject to be changed without prior notice FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against radio interference in a commercial environment This equipment can generate use and radiate radio frequency energy and if not installed and used in accordance with the instructions in this manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures are necessary to correct the interference CE Declaration
3. Firewall DDNS UPnP Tools Status 44 re WDS Setting The Wireless Distrubution System V DS provides a means to extend the range of a Wireless Local Area Network VVLAN WDS allows an Access Point AP to establish a direct link to another APs and allows stations to roam freely within the area covered by the WDS AP2 Setting 2 lt 5 Remote Mac 00 50 18 00 0f fe AP3 Setting 3 lt 5 Remote Mac 00 50 18 00 0f fe 27 SMCWBR14 GM Advanced Settings Microsoft Internet Explorer 8 File Edit Favorites Tools x la D search Se Favorites OZ 22 j LJE SMC System WAN Virtual Server Wireless You can configure the Barricade as a virtual server so that remote users accessing services such as the Web or FTP at your local site NAT via public IP addresses can be automatically redirected to local servers configured with private IP addresses In other words depending on the requested service TCP UDP port number the Wireless Barricade redirects the external service request to the appropriate server located at another internal IP address DDNS Well known services selectone Copy to lip B UPnP Tools Br IP Address Public Port s Data Type Status 1 Firewall 192146862 Te x 2 192168 2 lL 3 192168 2 Jit T Re m 4 19
4. 2 Choose MD5 Challenge or Smart Card or other Certificate as the EAP type 3 If choosing use smart card or the certificate as the EAP type we select to use a certificate on this computer Fig 3 4 We will change EAP type to fit the variable test condition Wireless Network Connection Properties E Ed General Wireless Networks Authentication Advanced Select this option to provide authenticated network access for wired and wireless Ethernet networks Enable network access control using IEEE 802 1 EAP type Smart Card or other Certificate M D 5 Dhallenge Smart Card or other Certificate Authenticate as computer when computer information i available Authenticate as quest when user ar computer information is unavailable 47 Figure 2 Enable IEEE 802 1X access control 48 Figure 3 Smart card or certificate properties 4 Windows 2000 RADIUS server Authentication testing 4 1DUT authenticate using certificate PC2 follows the same test procedures Download and install the certificate on PCI Fig 4 PCI choose SSID of DUT as the Access Point Set authentication type of wireless client and RADIUS server both to EAP TLS Disable the wireless connection and enable again 5 The DUT will send the user s certificate to the RADIUS server and then send the message of authentication result to PC1
5. Fig 5 6 Windows XP will prompt that the authentication process is success or fail and end the authentication procedure Fig 6 7 Terminate the test steps when get dynamic IP and PING remote host successfully 49 Certificates Personal Other People Intermediate Certification Autharities Trusted Root Certificatior Issued By Certificate intended purposes Wie Close Figure 4 Certificate information on PC1 s Network Connections File Edit View Favorites Tools Advanced Help Es gt 2 Search Folders Hak Address e Network Connections LAN or High Speed Internet Network Tasks A at Local 4rea Connection s Create a new Disabled T D Link DFE 5307X PCI Fast Ets Y e Set up a home or small Office network Figure 5 Authenticating 50 s Network Connections 6 File Edit Favorites Tools Advanced Bac E i 8 P 3 yp Search Folders Address Network Connections v E c LAN or or High Speed Internet Network Tasks p Local 4rea Connection Create new gt Disabled connection a D Link DFE 530T4 PCI Fast Et f Set up a home or small office network Figure 6 Authentication success 4 2 DUT authenticate PC2 using PEAP TLS PC2 choose the SSID of DUT as the Access Point Set authentication type of wireless client and RADIUS server both to PEAP TLS Disable the wireless connection and
6. Leam about setting up wireless network This is computer to computer ad hoc network wireless configuration Advanced access points are not used 66 Then if the wireless client wants to associate it has to request to authenticate Appendix D FAQ and Troubleshooting Reset to factory Default There are 2 methods to reset to default Restore with RESET button First turn off the router and press the RESET button in And then power on the router and push the RESET button down until the Status LED start flashing then remove the finger If LED flashes about 8 times the RESTORE process is completed However if LED flashes 2 times repeat 2 Restore directly when the router power on First push the RESET button about 5 seconds M1 will start flashing about 5 times remove the finger The RESTORE process is completed 67 SMC Network 38 Tesla rvine CA 92618 Phone 949 679
7. Note At any given time only one PC can use each Special Application tunnel 20 Firewall Parental Control 3 SMCWBR 14 GM Advanced Settings Microsoft Internet Explorer 39 O 9 d 4 fom O B S i Addres E C Documents and Settings Zsolt Mahunka Desktop SMC_html MIMO index htm SMC lt System WAN LAN Wireless This tool allows you to create access rules to block internet and network access for a specific port and or during a specific time NAT Firewall Parental Control DDNS UPnP Tools Status This option lets you enable disable web sites services by setting up rules 30 MAC Filter Th SMCWBR 14 GM Advanced Settings Microsoft Internet Explorer x 1 BI LP wes Q amp C Documents and Settingslzsolt MahunkalDesktop SMC_htmi MIMO index htm SMC lt System WAN MAC Filtering Table LAN Wireless This section helps provides MAC Filter configuration When enabled only MAC addresses configured will have access to your NAT network All other client devices will get denied access This security feature can support up to 32 devices and applies to clients Firewall ih Home DDNS UPnP Tools Status This option lets you control the Wireless clients connectiong to your MIMO Wireless Router Each on of them will be checked before letting them connect wirelessly This o
8. language a computer uses Computers must use the same protocol ta communicate Select Microsoft item in the manufactures list And choose TCP IP in the Network Protocols Click OK button to return to Network window 39 Select Network Protocol Fast Infrared Frotocol IPE SPE compatible Protocol Microsoft 32 bit DLC d Microsoft DLC NetBEUI The TCP IP protocol shall be listed in the Network window Click OK to complete the install procedure and restart your PC to enable the TCP IP protocol A 2 Set TCP IP Protocol for Working with NAT Router Click Start button and choose Settings then click Control Panel Double click Network icon Select the TCP IP line that has been associated to your network card in the Configuration tab of the Network window 40 Network Mf PCI Fast Ethernet DEC 21140 Based Adapter NetBEUI Dial Up Adapter MetBELII gt PCI Fast Ethernet DEC 21140 Based Adapter TCP IP gt Dial Up Adapter gt PCI Fast Ethemet DEC 21140 Based Adapter 1 aet File and printer sharing for Microsoft sadi o Remove _ Properies Client For Microsoft Networks Click Properties button to set the TCP IP protocol for this NAT Router Now you have two setting methods 41 Select Obtain an IP address automatically in the IP Address tab TCP IP Properties Don t input any value in the Gateway tab TCP IP Properties WINS Configuration IP Ad
9. Backup Settings File Download 2 You are downloading the file config bin From 192 168 123 254 Would pou like to open the or save it to your computer Always ask before opening this of file You can backup your settings by clicking the Backup Setting button and save it as a bin file Once you want to restore these settings please click Firmware Upgrade button and use the bin file you saved Reset To Factory Defaults Microsoft Internet Explorer X Reset all settings to Factory default Cancel You can also reset this product to factory default by clicking the Reset to default button 38 Appendix TCP IP Configuration for Windows 95 98 This section introduces you how to install TCP IP protocol into your personal computer And suppose you have been successfully installed one network card on your personal computer If not please refer to your network card manual Moreover the Section B 2 tells you how to set TCP IP values for working with this NAT Router correctly A 1 Install TCP IP Protocol into Your PC Click Start button and choose Settings then click Control Panel Double click Network icon and select Configuration tab in the Network window Click Add button to add network component into your PC Double click Protocol to add TCP IP protocol Select Network Component Type Click the type of network component vou want to install Cancel Protocol 1 a
10. For safe operation please use only the power adapter provided by SMCWBRI4 GM Package List Wireless broadband router Installation CD ROM Power adapter CAT 5 UTP Fast Ethernet cable Hardware Ports and Buttons Rear Panel 4 3 2 1 WAN PWR Figure 1 1 Rear Panel Ports Port Description PWR Power inlet WAN the port where you will connect your cable or DSL modem or Ethernet router Port 1 4 the ports where you will connect networked computers and other devices LED Indicators Front Panel Figure 1 2 Front Panel LED Power Power Green On indication System Blinking Status is flashed once per second to indicate system is alive status Power is being applied to this product Status WAN WLAN The WAN port is linked Blinking The WAN port is sending or receiving data Blinking Sending or receiving data via wireless 8 Link Link status Green On An active station is connected to the corresponding LAN 1 4 port Speed Blinking The corresponding LAN port is sending or receiving data 10 100 Rate Green On Data is transmitting in 100Mbps on the corresponding LAN port Re To reset system settings to factory defaults Getting Started Procedure for Hardware Installation Decide where to place your Wireless Broadband Router You can place your Wireless Broadband Router on a desk or other flat surface or you can mount it on a wall For optimal performance
11. You can click this button to renew or release IP manually Wizard 13 3 SMCWBR 14 GM Setup Wizard Microsoft Internet Explorer e xl File Edit Favorites Tools 8 10 deme CL JAS SMC 1 Channel and SSID 1 Channel and SSID 2 Time Zone 3 Broadband This page allows you to define SSID and Channel ID for wireless connection In the wireless environment the router can alos act as an wireless access point These parameters are used for the mobile station to connect to this access point 4 IP Address Info Network ID SSID default SSID broadcast Enable Disable Channel 11 gt gl Mme LL a My Computer 08 Setup Wizard will guide you through a basic configuration procedure step by step Set the basic Wireless Parameters and Press Next gt SMCWBR 14 GM Setup Wizard Microsoft Internet Explorer File Edit wiew Favorites Tools Qe 5 Favorites ORZ i Lha 3 Address e C Documents and Settings Zsolt Mahunka Desktop SMC_html MIMO index htm SIMIC C 1 Channel and SSID 2 Time Zone 2 Time Zone 3 Broadband Type Set the time zone for the Barricade This information is used for log entries and client filtering 4 IP Address Info Set Time Zone GMT 08 00 Pacific Time US amp Canada Tijuana zl YT ty Computer Setup Wizard Select Time Zone 14 SMCWBR 14 GM
12. place your Wireless Broadband Router in the center of your office or your home in a location that is away from any potential source of interference such as a metal wall or microwave oven This location must be close to power and network connection Setup LAN connection Wired LAN connection connects an Ethernet cable from your computer s Ethernet port to one of the LAN ports of this product Wireless LAN connection locate this product at a proper position to gain the best transmit Existing Connection DSL Cable Modem performance Figure 2 1 Setup of LAN and WAN connections for this product Setup WAN connection Prepare an Ethernet cable for connecting this product to your cable XDSL modem or Ethernet backbone Figure 2 3 illustrates the WAN connection Power on Connecting the power cord to power inlet and turning the power switch on this product will automatically enter the self test phase When it is in the self test phase the indicators status will be lighted ON for about 10 seconds and then status will be flashed 3 times to indicate that the self test operation has finished Finally the status will be continuously flashed once per second to indicate that this product is in normal operation Make Correct Network Settings of Your Computer The default IP address of this product is 192 168 2 1 and the default subnet mask is 255 255 255 0 These addresses can be changed on your need but the default values
13. 247 t Adapter TNET1130 WLAN Adapter i Profiles Adapter tupe wirel Pinging 192 168 0 247 with 32 bytes of data 4 SASEN 9 Nets W Connect to network Contral CG Ac Scan Auto Scan List C Documents and Settings fae ping 192 168 808 248 t OD IE e Connection information Trusted Servers Status oper Pingi 192 168 868 246 with 32 bytes of data 4 Elapsed time 00 04 13 from 192 168 0 248 bytes 32 time ims TTL 64 A ae Network SSID 123kk From 192 168 0 248 bytes 32 time ims TIL 64 Access point Q0 50 18 00 0F F8 From 192 168 686 248 bytes 32 time ims TIL 64 Packets in out 166 246 from 192 168 from 192 168 From 192 168 from 192 168 From 192 168 From 192 168 248 hytes 32 time 1ms ITL 64 248 hytes 32 time 1ms TTL 64 248 hytes 32 time 1ms TTL 64 Reconnect i ail 248 hytes 32 time 1ms TTL 64 248 hytes 32 time 4ms TIL 64 248 hytes 32 time ims TIL 64 248 hytes 32 time ims TIL 64 248 hytes 32 time ims TIL 64 from 192 168 From 192 168 Method2 35 1 First patch windows XP and have to install Service package 1 Patch http www microsoft com downloads details aspx displaylang en amp FamilyID 5039ef4a 6 1 e0 4c44 9 4f0 c25c9deO0ace9 2 Then reboot 3 Setting on the router and client Router Network ID SSID 123kk Channal Bow security WPA PSK Kev Mode ASCII Preshare Key 12345678 Client Go to Network Connection and
14. Address For example Use Static My IP Address and My Subnet Mask the private IP address and subnet mask your ISP assigned to you Server IP Address the IP address of the PPTP server PPTP Account and Password the account and password your ISP assigned to you If you don t want to change the password keep it empty Connection ID optional Input the connection ID if your ISP requires it Maximum Idle Time the time of no activity to disconnect your PPTP session Set it to zero or enable Auto reconnect to disable this feature If Auto reconnect is enabled this product will connect to ISP automatically after system is restarted or connection is dropped Connection Control There are 3 modes to select Connect on demand The device will link up with ISP when the clients send outgoing packets Auto Reconnect Always on The device will link up with ISP until the connection is established Manually The device will not make the link until someone clicks the connect button in the Status page 19 DNS J SMCWBR 14 GM Advanced Settings Microsoft Internet Explorer A sak CI B Searh d ies 2 B 2207 dress C Documents and Settings Zsolt MahunkalDesktop SMC_html MIMO index htm DNS A Domain Name Server DNS is an index of IP addresses and VVeb addresses If you type a VVeb address into your browser such as wwWw smc com DNS server will find that name in its index and find the matchin
15. January 1 Firewall DDNS Ends on January lt UPnP Tools Status Get Date and Time by online Time Servers NTP Pre set Servers time nist gov Custom Server Sync Now Set Date and Time using PC s Date and Time Computer Time Date Tuesday January 24 2006 10 27 56 AM Set Date and Time manually Year 2005 Month Dec Day 28 Time Hour 0 0 23 Minute 0 0 59 Second 0 59 E My computer Password Settings ES SMCWBR 1 4 GM Advanced Settings Microsoft Internet Explorer 8 xl File Edit View Favorites Tools Qu O 9d 6 De re O a U Address e C Documents and SettingsizsolE Mahunka Desktop SMC_html MIMO index htm System Home Password Settings Set a password to secure access to the Barricade Web Management You can also configure the amount of time that you will stay logged into the router using the idle time settings Wireless NAT Firewall DDNS UPnP Tools Status ord Options Idle Time Out Settings Idle Time fio Mins Idle Time 0 NO Time Out T my computer 7 16 Enable Disable Remote Management J SMCWBR14 GM Advanced Settings Microsoft Internet Explorer Remote Management Set the remote management of the Wireless Barricade If you want to manage the Wireless
16. Obtain an IP address from ISP automatically Host Name optional Required by some ISPs for example Home Renew IP Forever this feature enables this product to renew your IP address automatically when the lease time is expiring even when the system is idle Dynamic IP Address with Road Runner Session Management e g Telstra BigPond LAN IP Address is the IP address of this product It must be the default gateway of your computers WAN Type is Dynamic IP Address If the WAN type is not correct change it Host Name optional Required by some ISPs e g 9 Home Renew IP Forever this feature enable this product renew IP address automatically when the lease time is being expired even the system is in idle state PPP over Ethernet Some ISPs require the use of PPPoE to connect to their services PPPoE Account and Password the account and password your ISP assigned to you For security this field appears blank If you don t want to change the password leave it empty PPPoE Service Name optional Input the service name if your ISP requires it Otherwise leave it blank Maximum Idle Time the amount of time of inactivity before disconnecting your PPPoE session Set it to zero or enable Auto reconnect to disable this feature Maximum Transmission Unit MTU Most ISP offers MTU value to users The most common MTU value is 1492 Connection Control There are 3 modes to select Connect on demand The device will link up with
17. Setup Wizard Microsoft Internet Explorer Edit View Favorites Tools Help TE Q x 2 QD D sme O 01 16 A S Address e C Documents and Settings Zsolt Mahunka Desktop SMC_html MIMO index htm 7 gt 3 Broadband C 1 Channel and SSID 2 Time Zone Specify the WAN connection type required by your Internet Service Provider Specify Cable modem or xDSL modem 3 Broadband Type O 4 IP Address Info C Gg Cable Modem A cable modem requires minimal configuration When you have setup an account with your Internet provider the Wireless Barricade will be automatically configured when plugged into the cable modem The host name field is optional but may be required by some Service Providers If there is a Domain Name Server DNS that you would rather use you need to specify the IP address in the Advanced Setup VVAN DNS page C Ha Fixed IP xDSL Some xDSL Internet Service Providers may assign a fixed IP address for your Wireless Barricade If you have been provided with this information choose this option and enter the assigned IP address subnet mask gateway IP and DNS IP addresses for your Wireless Barricade ge PPPoE xDSL If you connect to the Internet using an xDSL Modem and your ISP has provided you with a password and service name then your ISP uses PPPoE You must choose this option and enter the required information Point to Point Tun
18. configure like below Network ID SSID 123k Channel Security APA RADIUS Server IP 182 168 1221 RADIUS port 1812 RADIUS Shared Key costra 4 Go to Odyssey Client Manager choose Profiles and Setup Profile name as 1 59 Add Profile Profile name fi User Info Authentication Settings PEAP Settings Login name rael Password Iv Permit login using password use Windows password prompt for password yse the following password fae iw Linmask E ertificate Iw Permit login using my certificate fae WEN Browse Cancel Login name and password are fael and fael Remember that you get certificate from Radius in Stepl 5 Then Choose certificate like above 60 Select Certificate 61 6 Then go to Authentication and first Remove EAP TLS and Add EAP TLS again Edit Profile Properties 62 7 Go Network and Select 1 and ok Network Properties Network Network name SSID Z3kk Connect to any available network Scan Description optional Network type Access point infrastructure made l Channel Association mode Encryption method data privacy Pre shared key WFA Fassphraze Linmask Cancel 63 Network Network name SSID f 23kk Connect to any available network Description optional Network type Association ma
19. enable again The DUT will send the user s certificate to the RADIUS server and then send the message of authentication result to PC2 Windows XP will prompt that the authentication process is success or fail and end the authentication procedure Terminate the test steps when PC2 get dynamic IP and PING remote host successfully Support Type The router supports the types of 802 1x Authentication PEAP CHAPv2 and PEAP TLS Note 1 is on Windows XP platform without Service Pack 1 PC2 is on Windows XP platform with Service Pack 1a PEAP is supported on Windows XP with Service Pack 1 only Windows XP with Service Pack 1 allows 802 1x authentication only when data encryption function is enable 51 Appendix C WPA PSK and WPA PC USER AN Wan 1 192 168 122 216 Wired LAN USER B Lan ip 192 168 123 254 Authentication Server Windows 2000 Radius server 192 168 122 1 Wireless Router LAN IP 192 168 2 1 WAN IP 192 168 122 216 Radius Server 192 168 122 1 UserA XP Wireless Card Ti 11g Tool Odyssey Client Manager Refer to www funk com Download http www funk com News amp Events ody c wpa preview pn asp 32 Or Another Configuration PC USER A Wireless PC 2 Wired LAN USER B aD 192 168 123 254 Authentication Server Windows 2000 Radius server 192 168 123 33 WPA PSK In
20. fact it is not necessary for this function to authenticate by Radius Server the client and wireless Router authenticate by themselves Method1 1 Go to the Web manager of Wireless Router to configure like below Network ID SSID 1234 Security WPA PSK iwi Key Mode ASCH 12345678 I Preshare Key 2 Go to Odyssey Client Manager first choose Network Before doing that you should verify if the software can show the wireless card 53 Open Adapters Odyssey Chent Manazer netting Commands Web Help Connection The following networks are configured t Profiles 123kk gt Networks Remove ds Auto S can Lists Properties EA Trusted Servers Adapters 3 Add and edit some settings 54 Network Properties Network CC CUL eat ccc Connect to any available netesork Description optional Network Access point infrastructure moda Esxccralion mode mm Erreruption method n Authentication Authenticate using profile pure uH pe ere Sten Sure nx en ae esphrase 12345678 p S20 mm oM l Lnmask 4 Back to Connection Then Select Connect to network You will see Odyssey Client Manager Commands Web Help Media State IU ns age Media discon c Connection annectian C Documents and Settings fae gt ping 192 168 0
21. then this product can sense the application type and open multi port tunnel for it DMZ Host supported Lets a networked computer be fully exposed to the Internet this function is used when special application sensing tunnel feature is insufficient to allow an application to function correctly Statistics of WAN Supported Enables you to monitor inbound and outbound packets Wireless functions High speed for wireless LAN connection Up to 54Mbps data rate by incorporating Orthogonal Frequency Division Multiplexing OFDM Roaming Provides seamless roaming within the IEEE 802 11b 11M and IEEE 802 11g 54M WLAN infrastructure IEEE 802 11b compatible 11M Allowing inter operation among multiple vendors IEEE 802 11g compatible 54M Allowing inter operation among multiple vendors Auto fallback 54M 48M 36M 24M 18M 12M 6M data rate with auto fallback in 802 11g mode 11M 5 5M 2M 1M data rate with auto fallback in 802 11b mode Security functions Packet filter supported Packet Filter allows you to control access to a network by analyzing the incoming and outgoing packets and letting them pass or halting them based on the IP address of the source and destination Domain Filter Supported Let you prevent users under this device from accessing specific URLs URL Blocking Supported URL Blocking can block hundreds of websites connection by simply a keyword VPN Pass through The router also supports VPN pass
22. to peer network connectivity of PCs of all form factors intelligent NAT appliances and wireless devices UPnP enables seamless proximity networking in addition to control and data transfer among networked devices in the home office and everywhere in between Firewall DDNS e UPnP Tools Status The Universal Plug and Play architecture offers pervasive peer to peer network connectivity of PCs of all form factors intelligent appliances and wireless devices UPnP enables seamless proximity networking in addition to control and data transfer among networked devices in the home office and everywhere in between 36 Configuration Tools Firmware Upgrade 3 SMCWBR 14 GM Advanced Settings Microsoft Internet Explorer 0 MAO l Xr elg su 0 8 Address E C Documents and Settings Zsolt Mahunka Desktop SMC_html MIMO index htm SMC System WAN Firmware Upgrade LAN Wireless This tool allows you to upgrade the Barricade system firmware using a file provided by SMC NAT Firewall DDNS The upgrade procedure takes about 20 seconds UPnP Note Do not power off the unit when it is being upgraded Tools Enter the path and name of the upgrade file then click the APPLY button below You will be prompted to confirm the upgrade When the upgrade is done successfully the unit will be restarted automatically Status You can upgrade firmware by clicking Apply button 37
23. 214682 5 192 168 2 jit m 19214662 7 HL Te m 7 1921682 8 192168 2 HI 9 19216821 m xi LIT HM Computer Virtual Server This product s NAT firewall filters out unrecognized packets to protect your Intranet so all hosts behind this product are invisible to the outside world If you wish you can make some of them accessible by enabling the Virtual Server Mapping A virtual server is defined as a Service Port and all requests to this port will be redirected to the computer specified by the Server IP Virtual Server can work with Scheduling Rules and give user more flexibility on Access control For Detail please refer to Scheduling Rule For example if you have an FTP server port 21 at 192 168 2 1 a Web server port 80 at 192 168 2 2 and a VPN server at 192 168 2 6 then you need to specify the following virtual server mapping table Special Application 28 3 SMCWBR 14 GM Advanced Settings Microsoft Internet Explorer e xl File Edit Favorites Tools Help Q O 98 010 Xem OO a _ JOS Address C Documents and Settings Zsolt Mahunka Desktop SMC_html MIMO index htm SMC System WAN Special Applications Wireless Some applications require multiple connections such as Internet gaming video conferencing Internet telephony and others These 2 NAT applica
24. Barricade from a remote location outside of the local network you must also specify the IP address of the remote PC LAN MI NAT M DDNS UPnP Tools Status WAN Setup SMCWBR 14 GM Advanced Settings Microsoft Internet Explorer O A 6 Ds dre O18 Address C Documents and Settings Zsolt MahunkalDesktop SMC_html MIMO index htm th Home WAN Settings The Barricade can be connected to your service provider in any of the following ways C Dynamic IP Address Obtains an IP address automatically from your service provider C PPPoE PPP over Ethernet is a common connection method used for xDSL LAN Wireless NAT Firewall DDNS UPnP Tools Status PPIP Point to Point Tunneling Protocol is common connection method used for xDSL connections in Europe v Static IP Address Your service provider provides a static IP address to access Internet services C BigPond In this section you can configure the built in client for the BigPond Internet service available in Australia This option 1s primary to enable this product to work properly The setting items and the web 17 appearance depend on the WAN type Choose correct WAN type before you start Static IP Address ISP assigns you a static IP address WAN IP Address Subnet Mask Gateway Primary and Secondary DNS enter the proper setting provided by your ISP Dynamic IP Address
25. ISP when the clients send outgoing packets Auto Reconnect Always on The device will link up with ISP until the connection 1s established Manually The device will not make the link until someone clicks the connect button in the Status page PPTP Some ISPs require the use of PPTP to connect to their services My IP Address and My Subnet Mask the private IP address and subnet mask your ISP assigned to you Server IP Address the IP address of the PPTP server PPTP Account and Password the account and password your ISP assigned to you If you don t want to change 18 the password keep it empty Connection ID optional Input the connection ID if your ISP requires it Maximum Idle Time the time of no activity to disconnect your PPTP session Set 1t to zero or enable Auto reconnect to disable this feature If Auto reconnect 1s enabled this product will connect to ISP automatically after system is restarted or connection is dropped Connection Control There are 3 modes to select Connect on demand The device will link up with ISP when the clients send outgoing packets Auto Reconnect Always on The device will link up with ISP until the connection 1s established Manually The device will not make the link until someone clicks the connect button in the Status page L2TP Some ISPs require the use of L2TP to connect to their services First please check your ISP assigned and Select Static IP Address or Dynamic IP
26. Q313664 Note Windows 2000 RADIUS server only supports PEAP after upgrade to service pack 3 and HotFix Q313664 You can get more information from http support microsoft com default aspx scid kb 313664 2 DUT Configuration Enable DHCP server WAN setting static IP address LAN IP address 192 168 2 1 24 Set RADIUS server IP Set RADIUS server shared key Configure WEP key and 802 1X setting The following test will use the inbuilt 802 1 X authentication method such as EAP_TLS PEAP_CHAPv2 Windows XP with SP1 only and PEAP_TLS Windows XP with SP1 only using the Smart Card or other Certificate of the Windows XP Professional 3 DUT and Windows 2000 Radius Server Setup Setup Windows 2000 RADIUS Server We have to change authentication method to MD5 Challenge or using smart card or other certificate on RADIUS server according to the test condition setup DUT 46 Enable the 802 1X check the Enable checkbox Enter the RADIUS server IP Enter the shared key The key shared by the RADIUS server and DUT We will change 802 1 X encryption key length to fit the variable test condition Setup Network adapter on PC 1 Choose the IEEE802 1X as the authentication method Fig 2 Note Figure 2 is a setting picture of Windows XP without service pack 1 If users upgrade to service pack 1 then they can t see MD5 Challenge from EAP type list any more but they will get a new Protected EAP PEAP option
27. Security None IT PP E My computer Wireless settings allow you to set the wireless configuration items Network ID SSID Network ID is used for identifying the Wireless LAN WLAN Client stations can roam freely over this product and other Access Points that have the same Network ID The factory setting is default Channel The radio channel number The permissible channels depend on the Regulatory Domain The factory setting is as follow channel 6 for North America channel 7 for European ETSI channel 7 for Japan WEP Security Select the data privacy algorithm you want Enabling the security can protect your data while it is transferred from one station to another The standardized IEEE 802 11 WEP 128 or 64 bit 1s used here WEP Key 1 2 3 amp 4 When you enable the 128 or 64 bit WEP key security please select one WEP key to be used and input 26 or 10 hexadecimal 0 1 2 8 9 A B F digits Pass phrase Generator Since hexadecimal characters are not easily remembered this device offers a conversion utility to convert a simple word or phrase into hex 802 1X Check Box was used to switch the function of the 802 1 X When the 802 1X function is enabled the Wireless user must authenticate to this router first to use the Network service 22 RADIUS Server IP address or the 802 1X server s domain name RADIUS Shared Key Key value shared by the RADIUS server and this router This key valu
28. T Desktop g TETEE E wow WU wow 2227 E Wireless Router gt Desktop PC Fast Ethernet Windows f Mac Unix like Start up and Log in 11 SMC WBR14 GM LOGIN Microsoft Internet Explorer File Edit Favorites Tools 2 gt M LJ O ixl 2 0 Du 7 Address e C Documents and Settings Zsolt Mahunka Desktop SMC_html MIMO index htm Go SMCWBR14 GM Password ee eee eee LOGIN CANCEL Please enter your password to access the Configuration Copyright 2003 SMC All rights reserved We suggest that you use IE4 0 or Netscape4 0 on 800 600 or 1024x765 16bits Eje TT a ty Computer Activate your browser and disable the proxy or add the IP address of this product into the exceptions Then type this product s IP address in the Location for Netscape or Address for IE field and press ENTER For example http 192 168 2 1 After the connection is established you will see the web user interface of this product There are two appearances of web user interface for general users and for system administrator To log in as an administrator enter the system password the factory setting is smcadmin in the System Password field and click on the Log in button If the password is correct the web appearance will be changed into administrator configure mode As listed in its main menu there are seve
29. US Shared Key If you select HEX you have to fill in 64 hexadecimal 0 1 2 8 9 A B F digits if ASCII the length of Pre share key is from 8 to 63 Key value shared by the RADIUS server and this router This key value is consistent with the key value in the RADIUS server WPA2 PSK AES Select Encryption and Pre share Key Mode If you select HEX you have to fill in 64 hexadecimal 0 1 2 8 9 A B F digits if ASCII the length of Pre share key is from 8 to 63 2 Fill in the key Ex 12345678 WPA2 AES Check Box was used to switch the function of the WPA When the WPA function is enabled the Wireless user must authenticate to this router first to use the Network service RADIUS Server IP address or the 802 1X server s domain name Encryption and RADIUS Shared Key If you select HEX you have to fill in 64 hexadecimal 0 1 2 8 9 A B F digits if ASCII 24 the length of Pre share key is from 8 to 63 Key value shared by the RADIUS server and this router This key value is consistent with the key value in the RADIUS server WPA PSK WPA2 PSK Select Encryption and Pre share Key Mode If you select HEX you have to fill in 64 hexadecimal 0 1 2 8 9 A B F digits if ASCII the length of Pre share key is from 8 to 63 Fill in the key Ex 12345678 WPA WPA2 Check Box was used to switch the function of the WPA When the WPA function is enabled the Wireless user must authenticate to this rout
30. add this trusted server to the database and press Yes Certificate chain WirelessCA win2000ady intra com tw Permanent trust Add this trusted server to the database Server name must end with fwin2000advintracomt 168 122 168 122 168 122 168 122 168 122 168 122 168 122 168 122 168 122 168 122 168 122 168 122 168 122 168 122 168 122 168 122 168 122 168 122 168 122 168 122 168 122 1 The UserA or UserB have to get certificate from Radius first 64 Proceed to authenticate with this server bytes 32 bytes 32 bytes 32 bytes 32 bytes 32 bytes bytes 32 bytes 32 bytes 32 bytes 32 bytes 32 bytes 32 bytes 32 bytes 32 bytes 32 bytes 32 bytes bytes 32 bytes 32 bytes 32 bytes 32 time ims time ims time ims time ims time ims time ims time ims time ims time ims time ims time ims time 2ms time ims time ims time ims time ims time ims time 2ms time 2ms time ims time ims http 192 168 122 1 certsrv account fae 1 passwd fael Connect to 192 168 122 1 Connecting to 192 1568 122 1 User name m Bemember my password Cancel 2 Then Install this certificate and finish 3 Setting on the router and client Router Network 1055107 123kk Channel Security 802 1 Settings RADIUS Server IP 182 168 1221 RADIUS Shared key Client Go to Netwo
31. are used in this manual If the TCP IP environment of your computer has not yet been configured you can refer to Appendix to configure it For example configure IP as 192 168 2 10 subnet mask as 255 255 255 0 and gateway as 192 168 2 1 or more easier configure your computers to load TCP IP setting automatically that is via DHCP server of this product After installing the TCP IP communication protocol you can use the ping command to check if your computer has successfully connected to this product The following example shows the ping procedure for Windows 95 platforms First execute the ping command ping 192 168 2 1 If the following messages appear Pinging 192 168 2 1 with 32 bytes of data Reply from 192 168 2 1 bytes 32 time 2ms TTL 64 A communication link between your computer and this product has been successfully established Otherwise if you get the following messages Pinging 192 168 2 1 with 32 bytes of data Request timed out There must be something wrong in your installation procedure You have to check the following 10 items in sequence Is the Ethernet cable correctly connected between this product and your computer Configuring Wireless Broadband Router This product provides Web based configuration scheme that is configuring by your Web browser such as Netscape Communicator or Internet Explorer This approach can be adopted in any MS Windows Macintosh or UNIX based platforms CHA R
32. business people to maintain continuous network connectivity Home users can stay connected to the network anywhere through a building without being limited by LAN cables via SMCWBRI14 GM s AP functionality This device also has the additional advantage of providing high performance throughput and large coverage range in wireless network The SMCWBR14 GM supports the UPnP NAT traversal and users can use any UPNP software easily without NAT unfriendly problem Besides it also supports NetBIOS over TCP to let computers share files in LAN Features Router Basic functions Auto sensing Ethernet Switch Equipped with a 4 port auto sensing Ethernet switch WAN type supported The router supports some WAN types Static Dynamic PPPoE PPTP L2TP Dynamic IP with Road Runner Firewall unwanted packets from outside intruders are blocked to protect your Intranet DHCP server supported of the networked computers can retrieve TCP IP settings automatically from this product Web based configuring Configurable through any networked computer s web browser using Netscape or Internet Explorer Virtual Server supported Enable you to expose WWW and other services on your LAN to be accessible to Internet users User Definable Application Sensing Tunnel User can define the attributes to support the special applications requiring multiple connections like Internet gaming video conferencing Internet telephony and so on
33. de Adapter type wireless Encryption method 9 9 Networks Iv Connect to network 123kk gt Authentication Scan Authenticate using Keys will be genera Pre shared key WPA 8 Back to Connection and Select 123kk If successfully the wireless client has to authenticate with Radius Server like below Scan lt Odyssey Client Manager Connection Connection i Profiles Adapter TNET1130 WLAN Adapter di b suos can Lists Connection information Trusted Servers Status authenticating Elapsed time Adapters Network 5510 123kk Access point 00 50 18 00 0F F8 Packets in out Reconnect Reauthenticate ail amp v 9 Result _ Odyssey Client Manager ea X Connection Connection Adapter TNET1130 WLAN Adapter v C Profiles Adapter type wireless Connect to network lt 123kk gt Scan open and authenticated ee Networks Auto Scan Lists Trusted Servers afinection information tatus Elapsed time Hz amp Adapters Network SSID 123kk point 00 50 18 00 0F F8 Packets in out 12679 13505 Reconnect Reauthenticate Method 2 Odyssey Client You are about to authenticate to an untrusted server To terminate communication press No To temporarily trust this server press Yes To permanently trust this server check
34. dress Beno e 42 Choose Disable DNS in the DNS Configuration tab TCP IP Properties Configure IP manually Select Specify an IP address in the IP Address tab The default IP address of this product is 192 168 2 1 So please use 192 168 2 xxx xxx is between 1 and 253 for IP Address field and 255 255 255 0 for Subnet Mask field 43 TCP IP Properties 192 168 123 115 255 255 255 0 In the Gateway tab add the IP address of this product default IP is 192 168 2 1 in the New gateway field and click Add button TCP7IP Properties 192 158 123 254 In the DNS Configuration tab add the DNS values which are provided by the ISP into DNS 44 Server Search Order field and click Add button ID Properties El Gateway WINS Configuration IP Address MyComputer 168 95 192 1 169 99 1 1 Appendix 802 1x Setting 192 168 123 254 Authentication Server Windows 2000 Radius server 132 168 123 33 Figure 1 Testing Environment Use Windows 2000 Radius Server 1 Equipment Details PCI 45 Microsoft Windows XP Professional without Service Pack 1 D Link DWL 650 wireless LAN adapter Driver version 3 0 5 0 Driver date 03 05 2003 PC2 Microsoft Windows XP Professional with Service Pack 1a Z Com XI 725 wireless LAN USB adapter Driver version 1 7 29 0 Driver date 10 20 2001 Authentication Server Windows 2000 RADIUS server with Service Pack 3 and HotFix
35. e is consistent with the key value in the RADIUS server 3 SMCWBR 1 4 GM Advanced Settings Microsoft Internet Explorer Det A A Alpa serve C y dress E C Documents and Settings Zsolt Mahunka Desktop SMC_html MIMO index htm SMC lt System WAN LAN Wireless Wireless Setting NAT Firewall DDNS UPnP Tools Status WPA PSK Select Encryption and Pre share Key Mode If you select HEX you have to fill in 64 hexadecimal 0 1 2 8 9 A B F digits if ASCII the length of Pre share key is from 8 to 63 Fill in the key Ex 12345678 23 EEXLINZENUUUETUECUUXUITIT T NMEMMMMMM NENNEN 5135 File Edit Favorites Tools Help Qa DO search p Favorites O2 H Address C Documents and Settings Zsolt MahunkslDestopiSMC htm MIMONmdechtm EY Gg SMC lt System Wireless Setting LAN Logout Wireless Network ID SSID default Pall Enable Disable Firewall DDNS Channel 11 v Ed DEBE 11g only Mixed C 11b only Tools Status WPA PSK El TKIP CAES asc likshbsah ee WPA Check Box was used to switch the function of the WPA When the WPA function is enabled the Wireless user must authenticate to this router first to use the Network service RADIUS Server IP address or the 802 1X server s domain name Encryption and RADI
36. er first to use the Network service RADIUS Server IP address or the 802 1X server s domain name Encryption and RADIUS Shared Key If you select HEX you have to fill in 64 hexadecimal 0 1 2 8 9 A B F digits if ASCII the length of Pre share key is from 8 to 63 Key value shared by the RADIUS server and this router This key value is consistent with the key value in the RADIUS server WDS Wireless Distribution System WDS operation as defined by the IEEE802 11 standard has been made available Using WDS it is possible to wirelessly connect Access Points and in doing so extend a wired infrastructure to locations where cabling is not possible or inefficient to implement How to setup and work AP 1 AP2 AP3 IP 192 168 2 1 IP 192 168 2 253 IP 192 168 2 252 Mac 00 50 18 00 0f fe Mac 00 50 18 00 0f fd Mac 00 50 18 00 0f fc SSID Default SSID Default SSID Default Channel 11 Channel 11 Channel 11 DHCP Server Enable 25 Blue Line Wireless Black Line Wire API Client If the Settings are ok the client and client2 can get IP from DHCP server Of AP1 Then Clientl and Client2 can get information each other AP1 Setting AP1 lt 7 gt AP2 Remote Mac 00 50 18 00 O0f fd AP1 amp AP3 Remote Mac 00 50 18 00 Of fc 26 SMCWBR 14 GM Advanced Settings Microsoft Internet Explorer Qe ix 2 p 1 SMC lt System WAN LAN Wireless NAT
37. g Advanced System Log Email Notification Enable the Discard Ping from WAN option if you don t want to be seen on the Internet You can also enable disable VPN protocols to pass through your NAT Firewall Set up your E Mail address and servers to get the notification emails on the desired account 33 Demilitarized Zone DMZ SMCWBR 14 GM Advanced Settings Microsoft Internet Explorer n Qe x 2 Seres 2 02 12 RE dress C Documents and Settings Zsolt MahunkalDesktop SMC_html MIMO index htm lt System ix DMZ Demilitarized Zone Wireless If you have a local client PC that cannot run an Internet application properly from behind the NAT firewall then you can open the client NAT up to unrestricted two way Internet access by defining a Virtual DMZ Host Firewall DDNS UPnP Tools Status This option lets you open all ports to one workstation behind your Router Be careful with this option because it let s everybody access that particular PC from everywhere 34 Dynamic DNS Services Edt view Favorites Tools Hep File Edit Favorites Tools Help O 1 0 verme D 22078 3 Logout MEG DDNS Dynamic DNS Settings LAN BIG Dynamic DNS provides users on the Internet a method to tie their domain name s to computers or servers DDNS allows your domain NAT name
38. g IP address 202 42 118 222 Most ISPs provide a DNS server for speed and convenience Since your Service Provider may connect to the Internet with dynamic IP settings it is likely that the DNS server IP s are also provided dynamically However if there is a DNS server that you would rather use you need to specify the IP address here LAN Wireless NAT Firewall DDNS UPnP Tools Status Set the primary and Secondary DNS server s as assigned by your ISP If you are using different DNS servers than your ISP the Internet response times might be slower and some sites might become inaccesible 20 LAN amp DHCP Server 3 SMCWBR 14 GM Advanced Settings Microsoft Internet Explorer File Edit Favorites Tools Help F O ixl 2 5 Ds zu S Address e C Documents and Settings Zsolt Mahunka Desktop SMC_html MIMO index htm gt Go SMC lt System 2888 LAN Settings LAN Wireless You can enable DHCP to dynamically allocate IP addresses to your client PCs or configure filtering functions based on specific clients NAT or protocols The Wireless Barricade must have an IP address for the local network Mic DDNS UPnP Tools Status th LAN IP Settings IP Address fi 932 158 2 1 255 255 255 0 Enable C Disable DHCP Server Settings Lease Time One Week gt 19 16921100
39. ix like com or org etc while URL Blocking require user to input a keyword only In other words Domain filter can block specific website while URL Blocking can block hundreds of websites by simply a keyword URL Blocking Enable Check if you want to enable URL Blocking URL If any part of the Website s URL matches the pre defined word the connection will be blocked For example you can use pre defined word sex to block all websites if their URLs contain pre defined word sex Enable Check to enable each rule 32 Advanced Firewall Settings 7h SMCWBR 14 GM Advanced Settings Microsoft Internet Explorer Qe A 75 JO R io wl JE ddress C Documents and Settings Zsolt Mahunka Desktop SMC_html MIMO index htm SMC lt System a LAN Wireless NAT Firewall DDNS UPnP Tools Status Advanced Firewall Settings Use this section to configure the advanced settings of your Barricade Firewall You can enable disable each option depending on your requirements If you want to be alerted via email for hacker attacks please configure the email alert option Email Alerts require you to set an SMTP outgoing mail server to send the email Your username and password are also required as most ISPs are using outgoing authentication to cut down on SPAM Enable the Advanced Firewall Protection if you want Hacker attack monitoring and loggin
40. neling Protocol is a common connection method used for xDSL connections in Europe C pe BigPond Tha RinPand Intarnat carica ic availahlo in Auctralia z Mme p p FE P T a My Computer 0 Select the WAN Access Type 3 SMCWBR 14 GM Setup Wizard Microsoft Internet Explorer e xl Qm O hag OC 1 E 1 channel 5510 4 IP Address Information 2 Time Zone 3 Broadband X 4 IP Address Info ge PPPoE xDSL Enter the User Name and Password required by your ISP in the appropriate fields If your ISP has provided you with a Service Name enter it in the Service Name field otherwise leave it blank User Name Dlecccccee Please retype your password esee e T minutes Always On Line C Manual Connect C Connect On Demand vv Mone LL Pa My Computer 0 Set your username and password You might select from the 3 different connection profiles Be careful with Always online if you do not have a flatrate connection 15 System Settings Time Zone File Edit Favorites Tools Qe E TN JO Search Favorites OI w LJE E SMCWBR 14 GM Advanced Settings Microsoft Internet Explorer m xl Set your Local Timezone Settings Time Zone GMT 08 00 Pacific Time US amp Canada Tijuana Wireless Daylight em Enable Auto Update feature NAT Starts
41. of Conformity This equipment complies with the requirements relating to electromagnetic compatibility EN 55022 A1 Class B Note The content of user manual will be revised without notice Table of Contents Introduction Features System Requirements Package List Hardware Ports and Buttons LED Indicators Getting Started Configuring Wireless Broadband Router System Settings WAN Settings LAN Settings Wireless Settings NAT Firewall Dynamic DNS Services UPnP System Tools Introduction Congratulations on your purchase of this outstanding Wireless Broadband Router This product is specifically designed for Small Office and Home Office needs It provides a complete SOHO solution for Internet surfing and is easy to configure and operate even for non technical users Instructions for installing and configuring this product can be found in this manual Before you install and use this product please read this manual carefully for fully exploiting the functions of this product The SMCWBRI4 GM is an ultra slim design and compact size of Wireless Broadband Router It is an ideal device for home and office users who need to efficiently and easily surf Internet anytime in home or office Additionally Wireless Broadband Router and fully compliant IEEE 802 11b 802 11g MIMO WLAN device functions let you connect to Local Area Network or Internet easily The SMCWBRI4 GM offers WLAN mobility for home user and
42. ption does not work for wired client PCs You can select from two different policies Allow will let all computers access the network except the ones appearing on the list Block will not let any computers accessing the network unless they are on the list 31 URL Website Blocking SMCWBR14 GM Advanced Settings Microsoft Internet Explorer File Edit Favorites Tools O AA Glan drm OS sd LI 8 Address C Documents and Settings Zsolt Mahunka Desktop SMC_html MIMO index htm SMC System WAN Website Blocking LAN Wireless You can block access to certain Web sites from a particular PC by entering either a full URL address or just a keyword of the Web NAT site aic To specify the PCs that you want to block these websites to go to the Parental Control page and check the box for Block Specific Web Sites in the Pre Defined Blocking Options section URL Keyword isse URL Keyword E Sie O Site2 Tools Status Site3 5 4 Sites sites site7 sites Site 9 Site 10 Site11 Site12 Site 13 Site14 Site 15 Site 15 Site 17 Site18 EEEE E m m B BH M URL Blocking will block LAN computers to connect to pre defined Websites The major difference between Domain filter and URL Blocking is Domain filter require user to input suff
43. ral options for system administration Status 12 SMCWBR 14 GM Advanced Settings Microsoft Internet Explorer Ol j seh prete 2 ru oL 3 Address C Documents and Settings Zsolt Mahunka Desktop SMC_html MIMO index htm lt System WAN Status LAN Wireless You can use the Status screen to see the connection status for Barricade s interfaces firmware and hardware version NAT numbers any illegal attempts to access your network as well as information on all DHCP client PCs currently connected to your Firewall DDNS Current time Wed Dec 28 00 11 38 2005 UPnP EPI Connection Status Barricade Settings Hardware Information Status DHCP Client Connected IP Address 192 168 2 1 Runtime Code Version R1 97e6b R61 WAN IP 192 168 122 76 Subnet Mask 255 255 255 0 Boot Code Version R1 0710 080 Subnet Mask 255 255 255 0 DHCP Server Enabled LAN MAC Address 00 50 18 00 0 01 Gateway 192 168 122 250 Firewall Disabled WAN MAC Address 00 50 BA EA 3A 45 Primary DNS 192 168 123 103 UPnP Disabled Hardware Version R1 01 Secondary DNS 192 168 122 250 Numbers of DHCP Clients 0 DHCP Client Log View DHCP clients Network Log This option provides the function for observing this product s working status WAN Port Status If the WAN port is assigned a dynamic IP there may appear a Renew or Release button on the Sidenote column
44. rk Connection and select wireless adapter Choose View available Wireless Networks like below Advanced choose 123kk Select WirelessCA and Enable in Trusted root certificate authority 4 Wireless Network Connection 4 Properties x General Authentication Advanced Select this option to provide authenticated network access for wired and wireless Ethernet networks Smart Card or other Certificate Properties When connecting Use my smart card Use a certificate on this computer Validate server certificate Connect only if server name ends with a eS Trusted root certific Authenticate as computer when computer information ig available Authenticate as guest when user or computer information is Use a different user name for the connection unavailable t Wireless Network Connection Properties BES 123kk properties General Wireless Networks Advanced Association Authentication Use Windows to configure my wireless network settings Network name 55101 Available networks Wireless network key To connect to an available network click Configure amp amit This network regu i JOYCE Preferred networks Network Kev Automatically connect to available networks in the order listed below nebwark A Move up Move down The ket is provided for me automatically
45. select wireless adapter Choose View available Wireless Networks like below Advanced choose 123kk 56 i Wireless Network Connection Properties EE 123kk properties General Wireless Networks Advanced Association Authentication Use Windows to configure my wireless network settings Network name 55101 Available networks Wireless network key To connect to an available network click Configure amit E Prefered network s Network key Automatically connect to available networks in the order listed below Confirm network key A 123kk Move up Move dawn index advanced gl The key is provided for me automatically Learn about setting up wireless network his is a computer to computer ad hac network wireless configuration Advanced s points are not used 57 WPA For this function we need the server to authenticate This function 1s like 802 1x PC USER A Wan ip 192 168 122 216 he Wired LAN USER B Authentication Server Windows 2000 Radius server 192 168 122 1 The above is our environment Method 1 The UserA or UserB have to get certificate from Radius first http 192 168 122 1 certsrv account fael passwd fael Connect to 192 168 122 1 Connecting to 192 1568 122 1 User name bs Remember my password 58 2 Then Install this certificate and finish 3 Go to the Web manager of Wireless Router to
46. through 802 1 supported When the 802 1X function is enabled the Wireless user must authenticate to this router first to use the Network service Support WPA PSK and WPA When the WPA function is enabled the Wireless user must authenticate to this router first to use the Network service SPI Mode Supported When SPI Mode is enabled the router will check every incoming packet to detect if this packet is valid DoS Attack Detection Supported When this feature is enabled the router will detect and log the DoS attack comes from the Internet Advanced functions System time Supported Allow you to synchronize system time with network time server E mail Alert Supported The router can send its info by mail Dynamic dns Supported At present the router has 3 ddns dyndns TZO com and dhs org Other functions UPNP Universal Plug and Play Supported The router also supports this function The applications X box Msn Messenger System Requirements To start to use the SMCWBRI4 GM your system must have the following minimum requirements Windows 95 98 ME 2000 An Ethernet 1OBaseT or 10 100 BaseT adapter for wired client At least one WLAN client adapter of 802 11g 54Mbps or 802 11b 11 Mbps for wireless and NetBIOS network protocol installed Internet Browser installed The SMCWBR14 GM requires an external 12V 1A power supply which is included in the SMCWBRI14 GM package
47. tions cannot work when Network Address Translation NAT is enabled If you need to run applications that require multiple connections specify the port normally associated with an application in the Trigger Port field select the protocol type as TCP or UDP then enter the public ports associated with the trigger port to open them for inbound traffic Popular applications selectone F Copy to jo a Trigger Port s E Incoming Port s Data Type ee 6 zl ET P P My computer fh Firewall DDNS UPnP Tools Status ea Eg m m m NM NM Ww Some applications require multiple connections like Internet games Video conferencing Internet telephony etc Because of the firewall function these applications cannot work with a pure NAT router The Special Applications feature allows some of these applications to work with this product If the mechanism of Special Applications fails to make an application work try setting your computer as the DMZ host instead Trigger the outbound port number issued by the application Incoming Ports when the trigger packet is detected the inbound packets sent to the specified port numbers are allowed to pass through the firewall This product provides some predefined settings Select your application and click Copy to to add the predefined setting to your list
48. to follow your IP address automatically by having your DNS records changed when your IP address changes Firewall DDNS UPnP Tools Status Enable C Disable service Configuration DynDNS erg Dynamic Domain Name Username E mail Enable Server Configuration 192 168 2 Web Server HTTP Port 80 Port 8000 FTP Server Port 201 Port 21T Email Server POP3 Port 110 SMTP Port 25 E Done H my Computer To host your server on a changing IP address you have to use dynamic domain name service DDNS So that anyone wishing to reach your host only needs to know the name of it Dynamic DNS will map the name of your host to your current IP address which changes each time you connect your Internet service provider Before you enable Dynamic DNS you need to register an account on one of these Dynamic DNS servers that we list in provider field To enable Dynamic DNS click the check box next to Enable in the DDNS field Next you can enter the appropriate information about your Dynamic DNS Server You have to define Provider Host Name Username E mail Password Key You will get this information when you register an account on a Dynamic DNS server After Dynamic DNS setting is configured click the Apply button 35 lt System i kn UPnP Universal Plug and Play Setting Wireless The Universal Plug and Play architecture offers pervasive peer
Download Pdf Manuals
Related Search