Silvercrest KH 2130 User's Manual
Contents
1. Transmitter connections 9 V Supply voltage 2 x Audio Video IN jacks 3 5 mm x TV output jack 3 5 mm Infrared socket IR Receiver connections 9 V Supply voltage Audio R L and Video OUT CINCH Operating temperature 5 35 C Humidity 5 90 no condensation Dimensions Transmitter Receiver unit 135x 55x 145 mm Weight Receiver approx 170 g Transmitter approx 185g e Mains power adapter approx 180 g Video signal 1 Vss Audio signal 1 Vss type Transmission power 10 mW Open space range up to 100 m Within enclosed buildings or other loca tions transmission disruptions reflections may arise that strongly impair the image and sound quality Safety instructions Please read the following information carefully The operating manual must be stored safely and passed on to any future owners of the radio transmission set Only use the product for the intended purpose as described in this operating manual IN Risk of electric shocks Set up the radio transmission set out side of the reach of children Never allow children to play with the radio transmission set without supervision Children could attempt to insert for eign objects into the openings in the device housing Only connect the devices to a socket with a mains voltage of 230 V 50 Hz using the supplied mains adapters Only plug the mains power adapter wall plug transformer in the2. personskader Dette produkt m ikke benyttes af personer inklusive bern med be graensede fysiske sensoriske eller psykiske evner eller med manglende erfaringer og eller manglende viden medmindre en person som er ansvar lig for deres sikkerhed holder opsyn med dem og giver dem anvisninger til hvordan det tr dl se overfersels saet skal anvendes Bern skal vaere under opsyn s det sikres at de ikke leger med produktet A Skader p apparatet e Uds t ikke det tr dl se overf rsels s t for h je temperaturer direkte solp virkning kraftige vibrationer samt get mekanisk belastning Brug ikke aggressive kemiske substan ser til reng ring Apparatets dele Fig A Senderen Q Sender LED driftsvisning Kontakt ROOM 1 Kontakt ROOM 2 InfraredHtilslutningsbesning IR Udgang til tv apparat AV indgang 2 AV indgang 1 Tilslutningsbesning til forsyningsspaendingen Taend slukknap til senderen Sendekanal omskifter apparatets underside Fig B Modtageren Q Modtager Infrar d modtager Q LED driftsvisning Audio video CINCH udgange Tilslutningsbesning til forsyningsspaendingen Taend slukknap til modtageren Modtagelseskanal omskifter apparatets underside Netdel 2 styk CINCH 3 5mm jack kabel 2 styk amp SCART CINCH adapter IN 6 SCART CINCH adapter OUT Infrared kabel med 3 sendedioder AUDIO adapter 3 5
3. signalet og herer til den gule CINCH bgsning Ved behov kan et ekstra apparat sluttes til senderen p samme m de og her v lges b sningen AV IN 2 Hvis signalkilden leverer signalerne via en SCART tilslutning skal du an vende den vedlagte SCART CINCH adapter OUT mellem apparatet og CINCH 3 5mm jack kablet Nu er signalkildens A V udgang op taget Hvis du alligevel gerne vil slutte signalkilden til et tv apparat skal du forbinde tv apparatet via b sningen OUTPUT TO TV med senderen Hertil skal du bruge enten et af de vedlagte CINCH 3 5mm jack kabler eller hvis begge allerede er opta get et tilsvarende kabel fra en special forretning Infrared forbindelse Du kan styre signalkilderne via deres infrared fjernbetjeninger selv om du ikke er i samme rum Modtageren op tager signalerne og sender dem tilbage til senderen som leder signalerne til signalkilderne via infrared kablet 6 Slut det vedlagte infrared kabel til senderens infraredtilslutningsbes ning Tag beskyttelsesfolien af en af de ved lagte pads og lim paden p den af rundede side af en af infrared kablets sendedioder 69 Tag nu den 2 beskyttelsesfolie af paden og lim sendedioden p sig nalkildens infrared modtager Bem rk Undg at anbringe sendedioderne p hele overfladen af signalkildens infrar d modtager Ellers kan direkte fiernbetjeningskommandoer ikke modtages laengere G frem p
4. You can also transmit the video signal of a computer if the computer s video card has a VIDEO output available For the sound transmissions use if neces sary the AUDIO adapter 3 5 mm jack on CINCH sockets which you connect to the output of the sound card if this has no cinch output The yellow plug of the CINCH 3 5mm jack cable you con nect to the video card s video output D Tips The video card must have an FBAS output available Make sure that the computer is cor rectly configured for outputting video on the video card Connecting the receiver Connect the Audio Video CINCH out puts of the receiver O to the A V in puts on the target device probably a television set For this you use the sup plied three core CINCH cable 65 If necessary with the aid of the supplied SCART CINCH adapter IN 6 Note Be sure to match the colours correctly Insert the cable plug of the second supplied wall plug transformer into the connection socket for the supply voltage Insert the wall plug transformer into a properly connected 230 V 50 Hz mains power socket AN Important Try if required to operate the receiver in various locations to avoid cancella tion effects and interference and thus improve the transmission quality Switching on Move the ON OFF switch and of the transmitter and receiver to the ON position to switch them both on Switch the signal source on and if
5. necessary start playback Switch the TV target device on and activate the A V inputs to which you have connected the receiver Select on the transmitter and on the receiver via the CHANNEL switch and implicitly in each case the same transmission channel The radio transmission should now function Note The data signals sent from the transmit ter are not encrypted This means that compatible devices within the recep tion range are capable of eavesdrop ping on the signal The radio transmis sion set uses an open standard To switch the signal source AV 1 and or 2 for a TV connected to the trans mitter press the button ROOM 1 8 the room in which the transmitter is located To switch the signal source AV 1 and or 2 for a TV connected to the receiver Q press the button ROOM 2 O the room in which the receiver is located Point the remote control of the signal source to the infrared receiver of the receiver The commands are sent to your signal source Improving the transmission quality You can try the following measures to im prove the quality in event of transmission disruptions Change the position and or direction of the transmitter and or receiver For problems with the remote control signal quality change the position of the infrared cable s transmission diodes to the infrared receiver of the signal source Try setting one of the other 4 trans missio
6. rselskvaliteten S dan t nder du for overf rsels s ttet Stil ON OFF kontakterne og 9 p senderen og modtageren p position ON for at t nde for begge T nd for signalkilden igen og start evt afspilningen T nd for tv apparatet m lapparatet og aktiv r A V indgangen du har slut tet modtageren til V lg altid den samme overf rselska nal med CHANNEL kontakterne og p senderen og modtageren Nu skulle den tr dl se overf rsel fungere Bem rk Dataene signalerne som udsendes af senderen er ikke krypterede Dermed er det muligt at andre kan lytte med i modtageomr det ved brug af et kompatibelt apparat Dette er en s kaldt ben standard For at skifte signalkilden AV 1 eller 2 over til et tv apparat der er sluttet til senderen skal du trykke p knappen ROOM 1 rum hvor senderen st r For at skifte signalkilden AV 1 eller 2 over til et tv apparat der er sluttet til modtageren skal du trykke p knappen ROOM 2 rum hvor modtageren st r Ret signalkildens fjernbetjening mod modtagerens infrar d modtager NU styres signalkilden 20 Forbedring af overforselskvaliteten Du kan foretage forbedringer ved over ferselskvaliteten Skift positionen og eller retningen for senderen eller modtageren Ved problemer med fjernbetjenings signalets kvalitet skal du ndre positio nen for infrar d kablets sendedioder p sign
7. its intended purpose Gesundheit und Sicherheit gem B S 3 1 1 Artikel 3 1 a Health and safety requirements pursuant to 3 1 1 Article 3 1 a angewendete harmonisierte Normen EN 60065 2002 A1 2006 Harmonised Standards applied Schutzanforderungen in Bezug auf die elektromagnetische Vertr glichkeit S 3 1 2 Artikel 3 1 b Protection requirements concerning electromagnetic compatibility 3 1 2 Article 3 1 b angewendete harmonisierte Normen EN 301 489 1 V1 6 1 Harmonised Standards applied EN 301 489 3 V1 4 1 Ma nahmen zur effizienten Nutzung des Funkfrequenzspektrums Measures for the efficient use of the radio frequency spectrum vi Luftschnittstelle bei Funkanlagen gem 8 3 2 Artikel 3 2 Air interface of the radio systems pursuant to 3 2 Article 3 2 Angewendete harmonisierte Normen EN 300 220 3 V1 1 1 Harmonised standards applied EN 300 440 2 V1 1 2 Bochum 29 07 2009 E Hans Komperna Gesch ftsf hrer CONTENT PAGE Intended Use 2 Contents 2 Technical data 3 Safety instructions 3 The device components 6 Putting the deviceintouse 6 Connecting the transmitter 6 Conmedingthereceiver 8 Swithngon 1 8 Improvingthetransmissionqudlity 9 Channel configuration parallel operation 9 Expansion options 2 Cleaning 9 Troubleshooting 9 Disposal O 10 Importer O 10 Important warranty information O IL Read these operating instructions carefully before us
8. samme m de for at inte grere andre signalkilder eller andre apparater som du vil styre med det tr dl se overf rselss t S t en af de vedlagte netdeles kabel stik ind i tilslutningsb sningen til forsyningssp ndingen S t netdelen i en korrekt tilsluttet 230 V 50 Hz stikkontakt Computer som signalkilde Du kan ogs f overfert videosignaler fra computeren hvis dens grafikkort har en VIDEO udgang Brug evt AUDIO adapteren 3 5 mm jack p CINCH stikkene til lydoverferslen og slut den til lydkortets udgang hvis det ikke har en cinch udgang Det gule stik til CINCH 3 5mm jack kablet sluttes til grafikkortets videoudgang D Bem rk Grafikkortet skal have en FBAS udgang Serg for at indstillingerne p compu teren er rigtige til billedudsendelse p grafikkortet Tilslutning af modtageren Slut audio video CINCH udgangene p modtageren til A V indgange ne p m lapparatet sandsynligvis et tv apparat Brug hertil det vedlagte tre leder CINCH kabel 6 Brug eventuelt den vedlagte SCART CINCH adapter IN 6 Bem rk Serg for at farvetildelingen er rigtig S t kabelstikket p den anden vedlag te netdel O ind i tilslutningsbasningen til forsyningsspaendingen Q S t netdelen i en korrekt tilsluttet 230 V 50 Hz stikkontakt A vigtigt Afpr v modtageren ved behov med forskellige placeringer for at undg fejl og afbrydelser samt for at forbedre overf
9. warranty DES Ltd Tel 0870 787 6177 Fax 0870 787 6168 e mail support uk kompernass com ED Kompernass Service Ireland Tel 1850 930 412 0 082 EUR Min Standard call rates apply Mobile operators may vary e mail support ie kompernass com INDHOLDSFORTEGNELSE SIDE Anvendelsesomr de 1 1 1 1 Y 14 Medfelgervedkob 14 Teknskedata 1 Sikkerhedsanvisninger 15 Apparatets dele B Opstart af apparatet 8 Tilslutning afsenderen 18 Tilslutning af modtageren 1 20 S dan t nder du for overf rselss tet 20 Forbedring af overf rselskvaliteten 21 Kanalindstilling parallelunktion o n Udvidelsesmuligheder 1 1 21 Reng ring 21 Felssgning Z 1 YO Bortskaffelse 1 22 Import r O 22 Vigtige garantioplysninger 1 1 1 23 L s betjeningsvejledningen omhyggeligt fer du bruger overferselssaettet f rste gang og gem vejledningen til senere brug Hvis du giver overferselssaettet videre til andre skal vejledningen ogs f lge med Anvendelsesomr de Apparatet m udelukkende anvendes til privat brug Det tr dl se overf rsels s t kan anvendes til audio og videoapparater som f eks TV apparat SAT modtager Set Top Box DVD CD afspiller e PC etc med AV ind udgange Det tr dl se overf rsels s ts anvendelsesomr de muligg r Tr dl s overf rsel af audio video og infrarede signaler overferse
10. 3c L KOMPERNASS GMBH BURGSTRASSE 21 D 44867 BOCHUM www kompernass com ID Nr KH 2130 06 09 V3 il RADIO SET Radio Set Operating instructions Radiotransmissionss t Betjeningsvejledning SILVERCREST KH 2130 A Konformit tserkl rung gem dem Gesetz ber Funkanlagen und Telekommunikationsendeinrichtungen FTEG und der Richtlinie 1999 5 EG R amp TTE Declaration of Conformity in accordarice with the Radio and Telecommunications Terminal Equipment Act FTEG and Directive 1999 5 EC R amp TTE Directive Hersteller Verantwortliche Person Komperna GmbH Manufacturer responsible person Burgstra e 21 44867 Bochum erkl rt dass das Produkt Funk bertragungs Set declares that the product Radio Transmission Set Type ggf Anlagenkonfiguration mit Angabe der Module KH 2130 Type if applicable configuration including the modules Telekommunikations Tk endeinrichtung lv Funkanlage Telecommunic tions ternlinal equiprrient Radio equipment Verwendungszweck Intended purpose bertragung von Audio und Video Signalen Transmission of audio and video signals bei bestimmungsgem er Verwendung den grundlegenden Anforderungen des 3 und den brigen einschl gigen Bestimmungen des FTEG Artikel 3 der R amp TTE entspricht complies with the essential requirements of 3 and the other relevant provisions of the FTEG Article 3 of the R amp TTE Directive when used for
11. alkildens infrared modtager Prev at indstille en af de andre 4 overferselskanaler via CHANNEL kontakterne og Q Kanalindstilling parallelfunktion Du kan betjene op til 4 tr dl se overf r selss t i n rheden af hinanden V lg s en egen kanal ud fra de 4 forskellige kanaler til hvert s t Udvidelsesmuligheder Du kan udvide overf rsels s ttet ved at slutte flere sendere eller modtagere til Bem rk Hvis du for eksempel vil aktivere en modtager med flere sendere b r du aldrig have flere sendere t ndt samtidigt Dermed undg s forstyrrelser i overf rslen 22 Sender ET SX N Modtager Reng ring A Fare for elektrisk st d Tr k netdelene ud af stikkontakten n r du vil reng re overf rsels s ttet Obs Kemiske reng ringsmidler kan beskadige overf rsels s ttet Reng r kun overf rsels s ttet med en let fugtet klud Fejls gning Hvis der opst r problemer bedes du f rst se efter i den efterf lgende tabel Hvis problemet ikke kan l ses bedes du henvende dig til et af de anf rte servicesteder Ingen audio videooverf rsel gt Ertaenderen og modtageren t ndt c Er sendekanal omskifteren og modtagerkanal omskifteren indstil let p den samme kanal c R kkevidden for overfersels saettet forringes af mure og lofter Reducer afstanden mellem sender og mod tager c Kontroll r CINCH og AV tilslutninger ne p de tilslut
12. an der forekomme for styrrelser ved overf rsel refleksion som p virker billed og lydkvaliteten negativt Sikkerhedsanvisninger Du bedes l se de f lgende informa tioner omhyggeligt igennem Betjeningsvejledningen skal opbeva res omhyggeligt og gives videre sam men med det tr dl se overfersels saet hvis dette gives videre til andre Brug kun produktet til anvendelsesom r derne som angivet i betjeningsvej ledningen Fare p grund af elektrisk st d Stil det tr dl se overf rsels s t uden for b rns r kkevidde Lad aldrig b rn lege med det tr dl se overf rsels s t uden opsyn B rn kan fors ge at stik ke genstande ind i apparatet gennem bningerne Slut kun apparaterne til en stikkontakt med en netsp nding p 230 V 50 Hz med de medf lgende netadaptere Stik kun netadapterne netdelene ind i tilslutningsb sningerne p apparatet som er m rket med 9 V Beskyt produktet mod fugt Anvend det kun i t rre rum ikke udend rs eller i n rheden af v sker S rg for at apparatet eller netadapte ren ikke kan beskadiges af v de eller fugt under driften F r storm og eller uvejr med fare for lynnedslag skal netadapteren afbrydes fra str mnettet Lad aldrig v ske komme ind i det tr dl se overf rsels s ts hus l g aldrig det tr dl se overf rsels s t ned i vand Reng r det kun med en let fugtet klud Brug ikke apparatet hvis netadapterens kabel e
13. currently applicable re gulations In case of doubt please contact your waste disposal centre eb Dispose of packaging materials in an environmentally responsible manner Importer KOMPERNASS GMBH BURGSTRASSE 21 44867 BOCHUM GERMANY www kompernass com Important warranty information You receive a 3 year warranty for this device as of the purchase date Should you in spite of our high quality stand ards have grounds for complaint please contact our Service Hotline In the event that processing of your complaint is not possible by telephone here you will re ceive a processing number RMA number as well as an address to which you can send your device for repair under warranty In the case of a mail in shipment please enclose a copy of the purchase receipt sales slip The device must be securely packed and the RMA number clearly visible Products sent in without an RMA number cannot be processed D Note The warranty provisions cover only material or manufacturing defects The warranty is not valid to parts subject to wear and tear for damage to breakable parts such as switches or rechargeable batteries This product is for private use only and is not intended for commercial applica tions The warranty is void in the case of abusive and improper handling use of force and internal tampering not carried out by our authorized service branch Your statutory warranty claims are not restricted by this
14. desig nated 9 V connection socket of the respective device Protect the device from moisture Use it only in dry rooms do not use it out doors or close to liquids Make sure that neither the device nor the mains adapter becomes wet or damp or sustains any other damage during use When a storm and or thunderstorm with the risk of lightening threatens disconnect the mains adapter from the mains power Never allow any fluids to enter into the housings of the radio transmission sets Never submerse the device in water Wipe it only with a slightly damp cloth Do not operate the device if a mains adapter the adapter s power cable or the device itself is damaged Arrange for a defective mains adapter to be repaired or replaced as soon as pos sible by Customer Services You are not permitted to open the housing of the radio transmission set or to modify it in any way Otherwise the warranty becomes void D Notice regarding power disconnection To completely disconnect the device from mains power the mains adapter must be unplugged from the wall socket For this reason the device must be used in a location where unobstructed access to the power socket is always assured so that you are able to imme diately pull out the power plug in the event of an emergency To eliminate the risk of fire prevent unintended activation and save energy costs the mains adapter must be unplugged from the wall socket when the de
15. gnal to be transmitted can be selected via a switch on the front panel of the transmitter Thereby the radio transmission set can transmit the image and sound signals of every de vice that emits a sound and or video signal via a suitable connection DVD Player CD Player e VCR Television SAT receiver set top box Video camera Computer video card etc Connecting signal sources to the transmitter On devices with cinch outputs for the audio and video signals you connect these via one of the supplied CINCH 3 5mm jack cables to the socket AV IN 1 amp on the rear panel of the transmitter Note Observe the colour coding c The white CINCH plug carries the left audio channel signal and belongs in the white CINCH socket gt The red CINCH plug carries the right audio channel signal and belongs in the red CINCH socket c The yellow CINCH plug carries the video signal and belongs in the yellow CINCH socket If required you can connect a second device as well with the transmitter and for this select the socket AV IN 2 If the signal source of your signal is available via a SCART connection you can use the supplied SCART CINCH adapter OUT between the device and the CINCH 3 5mm jack cable The A V output of your signal source is now occupied If you nevertheless want to connect the signal source to a TV connect the TV via the socket OUTPUT TO TV to the transmitter For
16. h mechanical loads Do not use any aggressive chemical substances for cleaning The device components Fig A The transmitter Transmitter LED status indicator Switch ROOM 1 Switch ROOM 2 O Infrared connection socket IR Q Output fora TV Q AV input 2 AV input 1 O Connection socket Transmitter s on off switch Transmitter channel toggle switch on the underside of the device Fig B The receiver Q Receiver Infrared receiver Q LED operating indicator Audio Video CINCH outputs Q Connection socket for the supply voltage Receiver s on off switch Reception channel switch bottom of device Wall plug transformer 2 pieces CINCH 3 5mm jacks cables 2 pieces SCART CINCH adapter IN SCART CINCH adapter OUT Infrared cable with 3 transmit diodes AUDIO adapter 3 5 mm mini stereo to CINCH female 6 CINCH CINCH cable Putting the device into use First take all device components from the packaging and remove all packing foil and tape Important notice Even when the system transmitter receiver is switched off the manufac turer still recommends disconnecting the wall plug transformer from the mains power or using a power strip with a shut off switch Only in this way is complete switch off assured thus contributing to economical consumer attitude Connecting the transmitter Note You can connect two signal sources The si
17. he CINCH and AV connec tions on the connected devices as well as on the transmitter and the receiver If you are using other radio devices same frequency this may result in disruptions It may also affect the range of the radio transmission set c The signal source must be switched on i e DVD player and playback started Poor transmission quality c Change the direction of the transmit ter and the receiver c Change the channel setting O on both components Make sure that the transmitter and the receiver have the same setting If you are using other radio devices same frequency this may result in disruptions It may also affect the range of the radio transmission set Disruptions in remote control commands c Point your remote control directly at the infrared receiver 6 Otherwise the commands cannot be executed c Fasten the infrared transmission di odes of the infrared cable 6 slightly offset to the infrared receiver of the signal source If you are using other radio devices same frequency this may result in disruptions It may also affect the range of the radio transmission set Disposal Do not dispose of the device in your normal domestic waste This product is subject to the provisions of European Directive 2002 96 EC Arrange for the product or parts of it to be disposed of by a professional dis posal company or by your communal waste facility Observe the
18. ing the device for the first time and preserve this booklet for later reference Pass this booklet on to whoever might acquire the device at a future date Intended Use The device inintended exclusively for private non commercial use The radio transmission set is suitable for audio and video equipment such as Televisions SAT receiver set top boxes DVD CD players e PCs etc The equipment must have the appropriate AV inputs outputs The radio transmission set is intended for Wireless transmission of audio video and infrared signals Transmission distances outdoors are possible up to approx 100 metres No warranty is provided for damages resulting from improper use of the device Contents 1 Radio transmission set 1 x transmitter 1 x receiver 2 Wall plug transformers 9 V 300 mA 1 SCART CINCH adapter IN 1 SCART CINCH adapter OUT 2 CINCH Jacks 3 5 mm cable 3 core 1 CINCH CINCH cable 3 core 1 Infrared cable infrared transmission diode cable for the remote control signals to be transmitted 3 Adhesive pads for the infrared transmitter diodes 1 AUDIO adapter 3 5 mm stereo jack on CINCH sockets 1 Operating manual Technical data Power supply Transmitter 9 V 300 mA Receiver 9 V 300 mA Manvfacturer HON KWANG ELECTRIC CO LTD Model number HKA O930EC 230 Input 230 V 50 Hz 30mA 7W Output 9 V 300mA 2 7 VA Protection class II
19. ller selve apparatet er beskadi get Lad omg ende netadapteren re parere eller udskifte af kundeservice hvis den er defekt Huset til overf rsels s ttet m aldrig bnes og dets konstruktion m aldrig ndres Ellers oph rer garantien D Info om afbrydelse fra str mmen For at afbryde apparatet fuldst ndigt fra nettet skal netadapteren tr kkes ud af stikkontakten Derfor skal appa ratet placeres s der altid er uhindret adgang til stikkontakten s netadap terne i en n dssituation kan tr kkes ud For at udelukke brandfare fore bygge utilsigtet tilslutning og for at spare energi b r netadapterne princi pielt altid v re afbrudt fra stikkontak ten n r apparatet ikke anvendes Hold altid direkte p netadapteren hvis du vil tage den ud af stikkontakten Tr k ikke i kablet og hold aldrig p netadapteren med v de h nder da det kan v re rsag til kortslutning eller elektrisk st d Stil ikke m bler eller lignende p netadapterens kabel og s rg for at det ikke kommer i klemme Bind aldrig knuder p kablet og s t det ikke sammen med andre kabler Laeg netadapterkablet og evt CINCH infrared kablet s ingen kan tr de p det eller snuble over det Hvis neta dapteren er defekt kan den starte en brand eller give elektrisk sted Kontrol l r netadapteren af og til Hvis den er beskadiget bedes du henvende dig til den n rmeste autoriserede kundeser viceafdeling eller til din forhandler f
20. lsstraekning op til 100 meter mulig ved fri sigt For skader der opst r fordi apparatet an vendes til andet end anvendelsesomr det giver vi ingen garanti Medf lger ved k b 1 tr dl st overf rsels s t 1 x sender 1 x modtager netdele 9 V 300 mA SCART CINCH adapter IN SCART CINCH adapter OUT CINCH jack 3 5 mm kabel 3 leder CINCH CINCH kabel 3 leder infrared kabel diodekabel for infrar d overf rsel af fjernbetjeningssignaler pads til fastsaetning af infrarede sendedioder 1 AUDIO adapter 3 5 mm stereo jack pa CINCH besninger 1 betjeningsvejledning aa AD UN Tekniske data Spaendingsforsyning Sender 9 V 300 mA Modtager 9 V 300 mA Producent HON KWANG ELECTRIC CO LTD Modelnummer HKA 0930EC 230 Indgang 230 V 50 Hz 30 mA 7 W Udgang 9 V 300 mA 2 7 VA Beskyttelsesklasse II Tilslutninger sender 9 V forsyningsspaending 2xaudio video IN jack 3 5 mm x TV udgang jack 3 5 mm Infrared besning IR Tilslutninger modtager 9 V forsyningsspaending Audio R L og video OUT CINCH Driftstemperatur 5 35 C Fugt 5 90 ingen kondensering M l Sender modtageenhed 135x55 x 145 mm V gt Modtager ca 170g Sender ca 185g Netadapter ca 180g Videosignal 1 Vss Audiosignal 1 Vss type Sendeeffekt 10mW Raekkevidde ved fri sigt indtil 100 m Inden i lukkede bygninger eller andre opholdssteder k
21. mm jack p CINCH besninger 6 CINCH CINCH kabel Opstart af apparatet Tag ferst alle apparatets dele ud af emballagen og fjern alle emballage og klaebefolier D Vigtige informationer inden opstart Producenten anbefaler at netdelene afbrydes fra stremnettet selv om anlaeg get er slukket sender eller modtager eller at der anvendes stikkontaktister der kan slukkes Det er den eneste m de som garanterer fuldst ndig slukning og som samtidig bidrager til konomisk funktion Tilslutning af senderen Bem rk Du kan slutte to signalkilder til Sig nalet der skal overf res kan v lges via en kontakt p senderens forside Det tr dl se overf rselsapparat kan overf re billed og lydsignaler fra alle apparater som udsender et lyd eller videosignal via en anvendelig tilslut ning DVD afspiller CD afspiller Video afspiller TV apparat SAT modtager Set Top Box Videokamera e Computer grafikkort etc Forbind signalkilderne med senderen Ved apparater med cinch udgange til audio og videosignaler forbindes disse med det vedlagte CINCH 3 5mm jack kabel med besningen AV IN 1 p bagsiden af senderen D Bem rk Hold eje med farvekodningen c Det hvide CINCH stik overf rer venstre audiokanal og h rer til den hvide CINCH basning c Det rede CINCH stik overf rer h jre audiokanal og h rer til den rede CINCH basning c Det gule CINCH stik overf rer video
22. n channels via the CHANNEL switch and Channel configuration parallel operation You can operate up to 4 radio transmis sion sets within close proximity of each other Then you select for each set their own channel from the 4 different avail able channels Expansion options Expand the radio transmission set by connecting multiple transmitters or receivers Note If you want to control a receiver selectively with several transmitters 9 you should never have several trans mitters switched on at the same time This prevents transmission disruptions Transmitter Q caa Receiver Cleaning Risk of electric shock Disconnect the wall plug transformer from the mains power socket when you want to clean the radio transmission set A mportant Chemical cleansers may damage the radio transmission set Clean the radio transmission set only with a slightly damp cloth Troubleshooting If a problem arises please check the fol lowing table first If the problem cannot be resolved please contact one of the listed service locations No audio video transmission Are the transmitter and receiver switched on c Are the transmitter channel switch and the receiver channel switch set to the same channel c The range of the radio transmission set is reduced by walls and ceilings Reduce the distance between the transmitter and the receiver c Check t
23. ng material lying unattended Plastic foils and bags and pieces of styropor etc are not toys they can be dangerous for small children AN Danger from radio signals Do not operate the device in a hospital a hospital operations room or in the vicinity of medical electronic systems The transmitted radio waves could impair the function of sensitive devices Keep the device at least 20 cm away from pacemakers since the proper functioning of the pacemaker could be impaired by radio waves The trans mitted radio waves can cause interfer ence noises in audio equipment Do not bring the device into the vicinity of flammable gases or an explosive environment e g paint shop while the radio components are switched on since the transmitted radio waves could trigger an explosion or a fire The range of the radio waves depends on ambient and environmental conditions IN Risk of accidents and injury This device is not intended for use by individuals including children with restricted physical physiological or intellectual abilities or deficiences in experience and or knowledge un less they are supervised by a person responsible for their safety or receive from this person instruction in how the device is to be used Children must be supervised to ensure that they do not play with the device AN Damage to the device Do not expose the radio transmission set to high temperatures direct sunlight severe vibrations or hig
24. ntakt affaldsordningen hvis du er i tvivl CA Aflever alle emballagematerialer p eS et affaldsdepot s milj et sk nes Import r KOMPERNASS GMBH BURGSTRASSE 21 44867 BOCHUM GERMANY www kompernass com 22 Vigtige garantioplysninger P dette apparat f r du 3 rs garanti fra Kompernaf Service Danmark Tel 45 4975 8454 Fax 45 4975 8453 e mail support dk kompernass com kebsdatoen Skulle du have grund til reklamationer trods vores h je kvalitets standarder bedes du venligst kontakte vores Service Hotline Hvis en telefonisk behandling af reklamationen ikke er mulig modtager du der et administrationsnummer RMA nummer samt en adresse til hvilken du kan indsende produktet til garantibehandling Du bedes vedl gge en kopi af kvitteringen kassebon ved indsendelse Apparatet skal v re pakket transportsikkert og RMA nummeret v re direkte synligt Indsendte apparater uden RMA nummer kan ikke behandles D Bem rk Garantiydelsen g lder kun for materiale eller fabrikationsfejl Garantiydelsen g lder ikke for sliddele for skader p skr belige dele som kontakter eller akkuer Produktet er kun beregnet til privat og ikke til erhvervsmaessigt brug Ved misbrug og uhensigtsm ssig behandling anvendelse af vold og ved indgreb som ikke er foreta get af vores autoriserede service afdeling oph rer garantien Dine garantikrav som er fastsat i loven begr nses ikke af denne ga
25. or at f den udskiftet IN Brandfare Lad vaere med at tilslutte netdelene hvis du lige har transporteret overf r sels saettet fra kulden og ind i et varmt rum Kondensvandet som kan opst herved kan i visse situationer edelaeg ge overfersels saettet N r overfarsels s ttet har f et rumtemperatur kan du starte det op uden problemer Stil ikke bne brandkilder f eks stea rinlys lige foran eller p apparatet Stil ikke genstande som er fyldt med vand p apparatet f eks vase Du m ikke tild kke netdelene da de bliver meget varme under drift Fare for kv lning Lad ikke emballeringsmaterialet ligge uden opsyn Plastikfolier poser styro pordele etc er ikke legetej og kan vaere farlige for bern UN Fare p grund af radiosignaler Brug ikke apparatet p sygehuse ope rationsstuer eller i n rheden af medi cinske elektroniksystemer De overf rte radiob lger kan del gge f lsomme apparaters funktion Hold apparatet mindst 20 cm borte fra pacemakere da funktionen ellers kan forstyrres af radiob lgerne De overf rte radiob l ger kan fremkalde st j i h reapparater Anbring ikke apparatet med t ndte radiokomponenter i n rheden af an t ndelige gasser eller i eksplosive om givelser f eks lakvirksomhed de de overf rte radiob lger kan udl se en eksplosion eller brand Radiob lgernes r kkevidde er afh ngig af milj og omgivelsesbetingelser UN Fare for ulykker og
26. ranti 23
27. tede apparater samt p senderen og modtageren c Hvis du har flere tr dl se apparater i gang samme frekvens kan der opst forstyrrelser R kkevidden for over f rsels s ttet kan p virkes yderligere derved c Signalkilden skal v re t ndt f eks DVD afspiller og afspilningen skal v re startet D rlig overf rselskvalitet c Flyt senderen og modtageren s de vender i en anden retning c Skift kanalindstillingen 9 69 for begge systemer S rg for at senderen og modtageren har samme indstilling c Hvis du har flere tr dl se apparater i gang samme frekvens kan der opst forstyrrelser R kkevidden for over f rsels s ttet kan p virkes yderligere derved Fejl ved fjernbetjeningskommandoerne c Ret fjernbetjeningen direkte mod infrar d modtageren Ellers kan kommandoerne ikke udf res c Kl b infrar d sendedioderne til infra r d kablet lidt forskudt p signalkil dens infrar d modtager c Hvis du har flere tr dl se apparater i gang samme frekvens kan der opst forstyrrelser R kkevidden for overf rsels s ttet kan p virkes yderli gere derved Bortskaffelse Kom under ingen omst ndig heder enheden i det normale husholdningsaffald Dette pro dukt er underkastet det euro p iske direktiv 2002 96 EC Bortskaf produktet eller dele deraf p et godkendt affaldsdepot eller den kommunale genbrugsplads F lg de aktuelt g ldende regler Ko
28. this you can use either one of the supplied CINCH 3 5mm jack ca bles or if both are already occupied an equivalent cable from your local dealer Infrared connection You can control the signal source via the remote control even if you are not in the same room The receiver picks up the signal and sends it back to the transmitter Q which then redirects the signal via the infrared cable 6 to the signal source For this you connect the supplied infra red cable 6 to the transmitter s infrared connection socket Remove the protective foil from one of the supplied adhesive pads and at tach the pad to the rounded off side of one of the infrared cable s transmis sion diodes Now remove the 2 protective foils from the adhesive pad and attach the trans mission diode to the infrared receiver of your signal source Note Avoid attaching the full length of the transmission diode to the infrared receiver of the signal source Other wise it is possible that direct remote control commands will no longer be received Proceed in the same manner to con nect further signal sources and or other devices that you want to control with the radio transmission set Insert the cable plug of one of the supplied wall plug transformers into the connection socket for the supply voltage O Insert the wall plug transformer 6 into a properly connected 230 V 50 Hz mains power socket Using a computer as the signal source
29. vice is not in use Always grasp the mains adapter di rectly when you wish to unplug it Do not pull on the cable and never touch the mains adapter with wet hands this could result in a short circuit or you receiving an electric shock Do not place furniture or other objects on the cable of the mains adapter and ensure that it cannot become trapped Never make a knot in the power ca ble and do not bind it together with other cables Run the mains adapter cable as well as any CINCH or in frared cable so that no one will step on it or trip over it A damaged mains adapter can cause a fire or electric shock Check the mains adapter from time to time Should it become dam aged contact your nearest authorised customer service centre or your dealer to have it replaced IN Risk of fire Avoid plugging in the wall plug trans former immediately after moving the radio transmission set from a cold envi ronment to a warm one The tempera ture change could result in condensa tion that could damage the radio trans mission set Once the radio transmission set has reached room temperature it can be safely put into operation Do not place any open fire sources such as candles directly next to or on the device Do not place any objects filled with liquid e g vases on the device The wall plug transformer must not be covered because it becomes very warm during operation A Risk of suffocation Do not leave packagi
Download Pdf Manuals
Related Search