Home
Schwinn A10 Assembly Manual
Contents
1. up and operate your machine For safe operation the location must be on a hard level surface Allow a workout area of minimum 67 x 56 170cm x 142cm Follow these basic points when you assemble your machine Read and understand the Important Safety Instructions before assembly Collect all the pieces necessary for each assembly step Using the recommended wrenches turn the bolts and nuts to the right clockwise to tighten and the left counterclockwise to loosen unless instructed otherwise When attaching 2 pieces lightly lift and look through the bolt holes to help insert the bolt through the holes Ol o w TN Ss The assembly can require 2 people Specifications and Tools Included Not Included 6mm recommended 13mm 17mm recommended P 15mm N 2 Parts 1 Console Mast with pre installed Handlebar Bracket et 9 J O17 AIOT N Hardware A B C D A Carriage Bolt M8 x 65 Acorn Nut 3 Assembiy 1 Attach Stabilizers to Main Frame 2 Install Pedals 3 Attach Seat Post to Main Assembly Note Hardware is pre installed on Seat and not on Hardware Card 4 Attach Seat Note The Adjustment Knob is pre installed on the Main Frame 5 Install Console Mast on Main Assembly NOTICE Do not crimp Console Cable 6 Install Handlebars on Console Mast Note Hardware is pre installed on Console Mast and not on Hardware Card NOTICE Make sure the Handlebar B
2. ad and understand the Assembly Manual Keep bystanders and children away from the product you are assembling at all times Do not connect power supply to the machine until instructed to do so Do not assemble this machine outdoors or in a wet or moist location Make sure assembly is done in an appropriate work space away from foot traffic and exposure to bystanders some components of the machine can be heavy or awkward Use a second person when doing the assembly steps involving these parts Do not do steps that involve heavy lifting or awkward movements on your own Set up this machine on a solid level horizontal surface Do not try to change the design or functionality of this machine This could compromise the safety of this machine and will void the warranty If replacement parts are necessary use only genuine Nautilus replacement parts and hardware Failure to use genuine replacement parts can cause a risk to users keep the machine from operating correctly and void the warranty Do not use or put the machine into service until the machine has been fully assembled and inspected for correct performance in accordance with the Owner s Manual Read and understand the complete Owner s Manual supplied with this machine before first use Keep the Owner s Manual for future reference Do all assembly steps in the sequence given Incorrect assembly can lead to injury or incorrect function Before Assembly select the area where you are going to set
3. racket has an equal distance between the two ends of the bracket and the bracket mount on the Console Mast 7 Install Console on Console Mast Note Hardware is pre installed on Console and not on Hardware Card NOTICE Do not crimp Console Cable Make sure that the switch on the back of the Console is set to B 8 Install Water Bottle Holder Note Hardware is pre installed on Console Mast and not on Hardware card 9 Install Batteries in Console Note The console uses D size batteries LR20 Make sure that the batteries point in the direction of the indicators in the battery bay If you use rechargeable batteries the optional power adapter will not recharge the batteries Optional Power Adapter The console for your machine can operate on battery power or AC power For AC power it is necessary to order the optional Power Adapter If batteries and the Power Adapter are installed the console will use the Power Adapter to operate Note If you use rechargeable batteries the optional Power Adapter will not recharge the batteries After the machine Is fully assembled connect the Power Adaptor to the console and the wall outlet NOTICE lf you use a power adapter for your bike make sure that the cord stays clear of the path of the pedals Attach the cord to the machine as shown i ___ lt is
4. recommended to remove batteries when they are not used to avoid damage from battery corrosion NOTICE To order the optional Power Adapter go to www schwinnfitness com powersupply Or call 1 800 605 3369 Final Inspection Inspect your machine to ensure that all fasteners are tight and components are properly assembled Do not use or put the machine into service until the machine has been fully assembled and inspected for correct performance in accordance with the Owner s Manual Leveling Your Bike The levelers are the polygonal end caps on the Rear Stabilizer Turn the end cap to adjust the level Make sure the bike is level and stable before you exercise SCHWINN FITNESS Printed in China Nautilus Bowflex Schwinn Fitness Universal
5. v We J SCHWINN FITNESS Ua Lis Schwinn A10 Upright Bike Ver pagina2 PRS EE tere LT Nautilus Bowflex Schwinn Fitness Universal 003 3799 042310A Nautilus Inc World Headquarters 16400 SE Nautilus Dr Vancouver WA USA 98683 800 NAUTILUS 800 628 8458 www Nautiluslnc com Customer Service North America 800 605 3369 customerservice schwinnfitness com Europe Middle East amp Africa 49 02203 2020 0 technics EMEA nautilus com Germany amp Austria 49 02203 2020 0 Switzerland 41 26 460 77 66 United Kingdom 44 1908 267 345 Asia Pacific amp Latin America 360 859 5180 technics APLA nautilus com Patent information This product may be covered by US and Foreign Patents and Patents Pending See Product for more information Printed in China 2010 Nautilus Inc All rights reserved and indicate a trademark or registered trademark Nautilus Inc www nautilus com trademarks include NAUTILUS BOWFLEX SCHWINN and UNIVERSAL and respective logos Other trademarks are the property of their respective owners Para obtener este manual en Espa ol Latino Americano vaya a http www schwinnfitness com Espanol Americano Latino Important Safety Instructions A This icon means a potentially hazardous situation which if not avoided could result in death or serious Injury Obey the following warnings Read and understand all warnings on this machine Carefully re
Download Pdf Manuals
Related Search
Related Contents
Braun cruZer 4 face Schwingtor Betriebsanleitung DE 3 Up-And-Over Door USER MANUAL Midland G11 Bedienungsanleitung / Manual Mode d`emploi Wiesel 2013 - HMF Hermeler Maschinenbau GmbH Plextor PlexWriter 8/20 Burner EverFocus EBC-910R User's Guide bilan d`étape 2012, annexes (PDF • 4Mo) Automated Inventory Solutions, Inc. User Manual Copyright © All rights reserved.
Failed to retrieve file