Sanyo ST-21KS2 User's Manual
Contents
1. e May be station trouble e Press IMAGE key to select e Color or Tint misadjusted NATURAL picture mode See page 18 Blue screen with Check A V connections e Press TV AV key AVT OVD Check external equipment e Switch on external equipment AV2 displayed Black screen with and e Check to see if channel is set See Setting of the Private Channel number the Private Position Position See pages 21 22 displayed color No sound or e May be station trouble e Try a different channel poor sound e MUTE may be on e Press MUTE key e Check A V connections e Press VOLUME key No Cable e Cable channel Indicator e Select CABLE signal and channels above should appear next to reset channel search number 13 channel number See page 14 No UHF e Cable channel Indicator C e Select VAF UHF signal channels should not appear next to and reset channel search VHF OK channel number See page 14 Cannot select e Channel may be removed e Skip channel to memory or scan some from memory manually See page 15 channels Check antenna connections Remote Control e Check batteries e Replace batteries will not work e Check if TV set is plugged in e Aim remote towards front of TV Cabinet makes e This is a normal condition during warm up and cool down of popping sound the plastic cabinet parts e Keep away your TV set from m2. select the time period CANCELLING THE SLEEP TIMER e Press the SLEEP key then select 0 00 by pressing VOLUME or key Note e Press the SLEEP key once to check the remaining time e Just one minute before switching off the TV 0 01 will be display on the screen e Ihe OFF TIMER cancels when the TV set is turned off or if a power failure occurs 19 ON TIMER SETTING When the ON TIMER is set TV will automatically be switched on to the selected Channel number when the specified time has elapsed 1 Press the SLEEP key twice 2 Press the VOLUME or key to select the time period The set time will be increased or decreased by 10 minutes each time when the VOLUME or key is pressed the maximum time which can be set is 24 hours Channel number for when TV is switched on by ON TIMER 3 Use Number key function to insert Channel number for when the TV set is switched on by ON TIMER see page 9 Note If no operation is performed after the TV has been switched on by the ON TIMER such as if you are not at home the TV will be automatically switched off after approximately 2 hours If the TV is already switched on when the time set for the ON TIMER has been reached only the Channel number will be changed to the set Channel number Cancelling ON TIMER To cancel the ON TIMER press the VOLUME or key to set it to ON 0 00 while the ON TIMER screen is shown Sw
3. Contrast Brightness PRESS RESET KEY Sharpness and Tint to factory settings AGAIN TO RETURN Clock and On Off Sleep Timers Clear _ Plug amp Play Returned to the state where it does not perform If desired personal settings can be made again using the menu options 23 USING THE AUDIO VIDEO INPUT JACKS You can connect your VCR camcorder video game stereo system etc directly to the TV using the Audio and Video jacks Be sure to switch off TV and external equipment before connecting cables Make sure all cable connectors are fully seated on the jacks to avoid possible signal loss and audio hum Cables are not supplied CONNECTING AUDIO VIDEO INPUT JACKS e Connect the video output from the external equipment to the TV s video input jack e Stereo R L audio Connect the right and left audio output from the external equipment to the TV s right and left audio input jacks Then select STEREO channel of the audio channel in the TV set with the AUDIO menu setting in AV mode If the external audio signal is a monaural one in this connection please use Mono to Stereo Adapter not supplied and connect to TV set Note AV stereo in AV mode always fixed on STEREO channel e Mono single jack audio Connect the audio output from the external equipment to the TV s left L audio input jack BACK
4. OF VCR CABLE OOO OUTPUT Y C8 S VIDEO R AUDIO L VIDEO Hen To watch video input picture select AV1 position by pressing the TV AV key AW FRONT AV JACKS gt To watch video input picture select AV2 position by pressing the TV AV key ANTENNA AV2 AN JACKS TERMINAL CAMCORDER Note Model 5 215 1 ST 21SF1K is not equipped with Front AV2 input terminal 24 USING THE DVD INPUT JACKS CONNECTING TO a DVD PLAYER WITH AV1 DVD VIDEO COMPONENT INPUT TERMINAL Y Cb or Cr Connect the component output terminal on your DVD player to the component video input terminal of this product NOTE When a signal of Y Cb Cr Y Pb Pr is received the output signal from monitor output terminal will be corresponding but without colour black and white image BACK OF DVD CABLE OUTPUT Y Ce S VIDEO R AUDIO L VIDEO ooo DH To watch video input picture select AV1 DVD position by pressing the TV AV key DVD Ar ANT 75 ANTENNA AN JACKS TERMINAL 25 USING THE AUDIO VIDEO OUTPUT JACKS The picture signal being displayed on the TV screen is output through the Monitor Output Jacks Use these terminals to record TV broadcasts and for video dubbing from AV input terminals CONNECTING ANOTHER VCR e Connect the video output from TV to anoth
5. Off timers Channel recall Mute key Automatic power shut off CARE AND CLEANING The surface of the cabinet can be damaged if not properly maintained Many common household aerosol sprays cleaning agents solvents and polishes will cause permanent damage to the fine surface 1 2 Unplug the power cord before cleaning the Television Clean the screen with a soft cloth dampened with glass cleaner or warm water Clean the cabinet with a soft cloth dampened with a mild household detergent and warm water Dry thoroughly Note NEVER spray liquids on the screen because they can run down and drip onto the chassis This may cause component failure not covered under Warranty SPECIFICATIONS Picture Tube Size measured diagonally All Models 21 inch 510 mm viewing screen Television System NTSC 181 Channel Tuning System VHF Channels 2 13 UHF Channels 14 69 Cable TV CATV 1 14 125 Automatic Fine Tuning on VHF and Cable Channels Speakers Model ST 21YS2 S BS ST 21KS2 K ST 21SF1 K ST 21VF1 S KS ST 21YS22 B ST 21KS22 K ST 21MS22 T B 5 x 9 cm 2 pcs Model ST 21XS2S 5 x 9 cm 2 pcs Sound output Model ST 21XS2S 10 W 10 W RMS Model ST 21YS2 S BS ST 21KS2 K ST 21SF1 K ST 21VF1 S KS ST 21YS22 B ST 21KS22 K ST 21MS22 T B 5 0 W 5 0 W RMS Antenna Input VHF UHF CATV 75 ohms Unbalanced AN Input Jacks Model ST 21XS2S ST 21YS2 S BS ST 21KS2 K ST 21VF1 S KS ST ST 21YS22 B ST 21K
6. cord is plugged in there is still connection to the AC power source mains Unplug the TV set before moving it or if you are not going to use it for several days Do not squash power supply cord under the television receiver iim Do not place this product on an unstable cart stand tripod bracket or table The product may fall causing serious personal injury and serious damage to the product If the television is to be built into a compartment or similarly enclosed the minimum distances must be maintained Heat build up can reduce the service life of your television and can also be dangerous UNPACKING Treat the TV as a precise piece of equipment that requires careful handling Keep the shipping carton until you are sure the TV has not been damaged Report any damage to the place of purchase Check to find the following items Remote Control Two AA Batteries CONTENTS DESCRIPTION 4 o gt eae Ag Se kee e Choos On KATA 4 SOC CIC ANON Soi cot ek aun dida do dei el OEC Um le dade uid 5 Front Control Panel pasama RE ROI o edere dnd 6 7 Operating Control Functions 7 Remote 333 Bm RAAT NE hb Ad 8 9 SETUP Connecting the Antenna or Cable 10 11 Plug in the Power Cord aa 12 OPERATION TURN On the TM uoo do ae d AUR ene NG Bok dO eC es 12 PING seran dcus o aoc CORE
7. 4252 049 562 0666 054 811 1601 032 346 0471 033 337 1313 053 321 6212 082 300 8381 08822 724 482 SANYO SANYO PHILIPPINES INC MAKATI CITY PHILIPPINES Part No 1AA6P1P5575 E BE4P E FC8 A Printed in Indonesia Website WWW Sanyo com ph
8. ADAPTER WITH VCR WITHOUT VCR BACK OF VCR BONNET TO CONNECT DIRECTLY s Li 1 1 VCR TO TV NG va OR SINGLE POLE AN JACKS Ka INDOOR ANTENNA ww wg O WITHOUT ADAPTER orur O O CHA s TOTV CONNECT TO TV TO USE TV TUNER CONNECT TO TV TO USE VIDEO MODE ANT 750 ANTENNA AN JACKs TERMINAL BACK OF TV 11 PLUG IN THE POWER CORD Plug the power cord into a convenient wall outlet that has standard house power of 230 volts ac 50 60 Hz CAUTION To prevent electric shock insert the AC PLUG fully into the outlet Note As a safety precaution unplug or turn off the TV with the MAIN POWER switch on the TV front panel when you plan to be away for an extended period of time AC PLUG TURN ON THE TV Press the POWER key Note The TV will switch off automatically after 10 minutes if a signal is not being received This feature is not active while the mode is selected PLUG amp PLAY Automatic setting up channels This TV set provides a self automatic tuning and sorting system function called Plug amp Play It automatically begins searching and storing of all available channels when switching on the TV set for the first time Let s start Connect power cord of the TV set to a wall outlet and turn on the TV set by pressing the Mains ON OFF button Self automatic tuning s
9. FF lMisELECT W ADJUST EXIT Audio adjustment menu in AV mode 17 SELECTING THE PICTURE MODE e Press the IMAGE key on the remote control to select the picture mode PERSONAL PERSONAL DYNAMIC NATURAL y Use the chart below as a guide when you select the picture mode NATURAL e Press the IMAGE key once to check the picture mode ECO gt GAME Note If while DYNAMIC NAYTURAL ECO or mode is selected the Color Brightness Contrast Sharpness Tint or White tone control is readjusted by using the Picture Adjustment menu the picture mode will automatically change to PERSONAL PICTURE MODE Picture Adjustment Settings PERSONAL for your preference as adjusted with Picture adjustment menu DYNAMIC for high color contrast and brightness picture settings suitable for viewing an ordinary TV program in a brightly lit room NATURAL for normal viewing with factory settings ECO for low color contrast and brightness picture settings suitable for viewing movies in a dimly lit room This mode is economical of the TV power consumption This mode is gentle on the eyes Perfect for TV game due to subdued color and soft contrast 18 TIMER SETTING OFF TIMER SETTING The OFF Timer will switch off the TV automatically Use your remote control to set the Off Timer 1 Press the SLEEP key until the desired time delay appears 2 Press the VOLUME or key to
10. HANNEL NUMBER OFF TIMER OR ON TIMER To check the channel number time or sleep timer press the DISPLAY key on the remote control Press the DISPLAY key once for about 5 second display Press the DISPLAY key again to clear the screen Off 5 Second Display OFF 0 30 0 20 11 Video Mode OFF 0 30 STEREO 0 20 11 AV1 AUTO The Colour System appear in AV mode only AUTO PAL NTSC NTSC4 43 Press the DISPLAY key repeatedly select a suitable colour system in AV Mode see page 23 Channel number for when TV is switched on by ON TIMER Select STEREO or MONO channel of the audio channel in the TV set with the AUDIO menu setting in AV mode 22 SELECTING THE COLOUR SYSTEM IN AV MODE Depending on the type of video tape or connected AV equipment being used it may be necessary to select colour system In this case press the DISPLAY key and select a suitable colour system Each time the DISPLAY key is pressed colour system is changed as follow PAL NTSC NTSC4 43 RESETTING THE TV This feature automatically resets the television to factory settings If your adjustments have been changed or your personal preferences are not satisfactory just press RESET key on the remote control twice This feature will automatically reset Video Mode to TV Antenna Mode to VHF UHF Channel Memory Clear all channels Picture Adjustments in PERSONAL mode Color
11. KEYS OPERATION 1 DISPLAY Key 9 Press once to display the channel number off time on timer or on channel number by on timer on the 10 screen for 5 seconds Press again to remove the display See page 22 This button also used to select the Colour System in AV Mode See page 23 POWER Key Press to turn the TV On and Off While the power indicator lights the remote operation is available IMAGE Key Press to select the picture mode PERSONAL DYNAMIC NATURAL or GAME See page 18 MENU Key Use this key with the A V and keys to adjust the features of the on screen menu system See pages 13 17 12 CHANNEL SCANNING A V Keys Press A up or V down to scan 13 through the channels in memory MUTE Key Press once to turn off volume 14 Press again to restore volume X SURROUND Key Press this key to get surround sound TV AV Key Press to select the program mode TY or AVI or AVI DWD or AW2 See pages 24 26 Note In model ST 21SF1 ST 21SF1K This button used to select mode or AVI or AVI DVD 11 RECALL Key Use this key to recall the last selected channel NUMBER Keys Press to directly select channels Two keys must be pressed For channels 1 through 9 press 0 first then the number For channels 10 through 99 press the two numbers in sequence For channels 100 through 125 press 1 key t
12. Lb FRONT CONTROL PANEL Model ST 21XS2S SANYO Nur m J KA Press to open VIDEO L AUDIO R 3 2 HH A 4 8 7 6 5 1 Model ST 21YS2S ST 21YS2BS ST 21YS22 ST 21YS22B _ Press to open AV2 IN N eee VIDAN LARULAR R 1 IE 4 8 76 b 4 Model ST 21KS2 ST 21KS2K ST 21KS22 ST 21KS22K Pull to open Model ST 21SF1 ST 21SF1K FRONT CONTROL PANEL Model ST 21VF1S ST 21VF1KS Model ST 21MS22 ST 21MS22T ST 21MS22B Press to open mn NS 3 2 1 e e UWE L uk dE T fe tf WTH 7 6 5 4 OPERATING CONTROL FUNCTIONS 1 MAIN POWER Switch Press to turn on the TV Then the power indicator lights and the TV is ready for remote operation Remote Sensor Receives the infrared control signals from the hand held remote control unit Point the remote control toward here POWER Indicator 4 CHANNEL Scanning V A Keys Press V down or A up to scan through the channels in memory VOLUME Keys Press to adjust the volume level The volume level indicator will appear on the screen BASS EXPANDER AVOLUME 40 6 MENU Key Use this key along with the Channel keys and the VOLUME keys to adjust the features in the on screen menu TV AV Key Press to select the program mode TV or or AVI DVD or V2 Note In model ST 21SF1 ST 21SF1K Thi
13. OWNER S MANUAL REMOTE CONTROL COLOR TV MONITOR SANYO ST 21XS2S ST 21YS2S ST 21YS2BS ST 21YS22 ST 21YS22B ST 21KS2 ST 21KS2K ST 21KS22 ST 21KS22K ST 21SF1 ST 21SF1K ST 21VF1S ST 21VF1KS ST 21MS22 ST 21MS22T ST 21MS22B Safety Precautions N To prevent electrical shock do not remove the back cover This unit is fully transistorized and does not contain user serviceable components Report any problems to qualified service personnel To reduce the risk of fire or electrical shock do not expose this appliance to rain or other moisture No objects filled with liquids such as vases shall be placed on this appliance Do not drop or push objects into the television cabinet slots or openings When playing TV video games do not use intense brightness and or contrast settings over an extended period of time This may leave a permanent image of the playing field on the picture screen Do not block the ventilation holes in the back cover Adequate ventilation is essential to prevent failure of electrical components No naked flame sources such as lighted candles should be placed on the apparatus Please read and keep these instructions A A Avoid exposing the television receiver to direct sunlight and other source of the heat Do not stand the television receiver directly on other products which give off heat E g video cassette players audio amplifiers Even if your TV is turn off and the power
14. S22 K ST 21MS22 T B e Video Input 2 DVD Input Y CB CR 1 Audio Input R L 2 RCA Connectors Model ST 21SF1 K Video Input 1 DVD Input Y CB CR 1 Audio Input R L 1 RCA Connectors Monitor Output Jacks Video Output 1 Audio Output R L 1 RCA Connectors Designs and specifications are subject to change without notice Remote Control Transmitter Numbered Channel Selection Channel Scanning Up Down Volume Up Down Mute Power Recall Display Sleep Menu Image Surround TV AV Power Requirement 127 240 V AC 50 60 Hz Dimensions WxHxD Model ST 21XS2S 654 mm x 467 mm x 335 mm 25 8 in x 18 4 in x 13 2 in Model ST 21YS2 S BS 598 mm x 465 mm x 396 mm 23 5 in x 18 3 in x 15 6 in Model ST 21YS22 B 598 mm x 465 mm x 328 mm 23 5 in x 18 3 in x 12 9 in Model ST 21KS2 K ST 21KS22 K 580 mm x 465 mm x 326 mm 22 8 in x 18 3 in x 12 8 in Model ST 21SF1 K 570 mm x 460 mm x 465 mm 22 4 in x 18 1 in x 18 3 in Model ST 21VF1 S KS 580 mm x 460 mm x 468 mm 22 8 in x 18 1 in x 18 4 in Model ST 21MS22 T B 580 mm x 465 mm x 328 mm 22 8 in x 18 3 in x 12 9 in Weight Approximate Model ST 21XS2S 19 6Kg 43 2 Lb Model ST 21YS2 S BS 20 1Kg 44 3 Lb Model ST 21KS2 K 19 7Kg 43 4 Lb Model ST 21SF1 K 19 8Kg 43 6 Lb Model ST 21VF1 S KS 20 5Kg 45 2 Lb Model ST 21YS22 B 18 0Kg 39 6 Lb Model ST 21MS22 T B ST 21KS22 K 17 9Kg 39 4
15. agnetic source then turn off your TV setand disconnect TV s power cord from AC outlet keep this Colour Spot On condition about more than 60 minutes and turn on again your TV The CRT set if time is reach If colour spot is not disappear after this solutio have done please contact your local dealer AUTHORIZED SERVICE CENTERS SANYO Service Center Basement Solid House Building 2285 Don Chino Roces Avenue Ext Makati City Quezon City Branch 137 A Roosevelt Ave SFDM Quezon City Dagupan Branch No 3 Pinkies Bldg Zamora cor Gomez St Dagupan City Pangasinan San Fernando Branch Cher Hil Subd Mac Arthur Highway San Fernando City Pampanga San Pablo Branch 175 C Bgy San Rafael San pablo City Laguna Naga Branch Door No 8 Bldg 1 Puritan Land Devt Corp Roxas Ave Naga City Cebu Branch PO 238 Lopez Jaena St Tipolo Mandaue City lloilo Branch D Appliance Arcade South Fundidor Molo Iloilo City Tacloban Branch No 35 T Claudio St Tacloban City Davao Branch San Josua Realty Bldg Km 7 Lanang Davao City Cagayan De Oro Branch Door 1 True Value Bldg Lapasan St Cagayan De Oro City Authorized SANYO Service Centers Z2 TEL NO 632 892 1493 02 374 1349 02 414 9647 075 522 0254 045 860 4252 049 562 0666 054 472 3650 032 346 8048 033 336 8698 053 321 6212 082 300 6586 088 231 4628 lt FAX NO 632 892 1260 075 522 0254 045 860
16. below as a guide when you make adjustments WISELECT W ADJUST M ExiT 6 Press MENU key to exit BRIGHTNESS CONTRAST TINT SHARPNESS WHITE TONE D gt lMisELECT W ADJUST IM EXIT Picture adjustment menu PICTURE ADJUSTMENTS KEY KEY COLOR Adjusts color intensity Lighter Deeper BRIGHTNESS Adjusts picture brightness Darker Brighter CONTRAST Adjusts picture contrast Lighter Deeper TINT Adjusts color tints Reddish Greenish SHARPNESS Adjusts picture detail Softer Crisper WHITE TONE Adjusts white balance Reddish Bluish 16 AUDIO ADJUSTMENT MENU This feature uses the on screen menu system to adjust the audio controls Bass Treble Balance Bass Expander on or off Surround on or off and Stereo stereo or mono this feature available in AV mode only AUDIO ADJUSTMENTS 1 2 Press MENU The Main Menu will appear See page 13 Press the CHANNEL A up or V down key to select AUDIO Press VOLUME or key The Audio Adjustment menu will appear Press the CHANNEL A up or V down key to select the control you want to adjust Use the VOLUME or key to make adjustments Press MENU key to exit PICTURE PRESET MISELECT ADJUST EXIT Select AUDIO v TREBLE BALANCE BASS EXPANDER OFF SURROUND OFF __ gt MISELECT ADJUST EXIT Audio adjustment menu in TV mode BASS TREBLE BALANCE BASS EXPANDER OFF SURROUND O
17. eio dias eo eee A 12 On Screen Menu 13 Channel Setup 14 Setting the Antenna 14 Resetting Channel 14 Skipping 15 Picture Adjustment 16 Picture Adjustments 16 Audio Adjustment 17 Audio Adjustments 17 Selecting the Picture Mode 18 Timer Setting 4 use doe dee ee 19 20 Setting of the Private Position 21 22 Checking the Channel Number Off Time or On Timer 22 Selecting the Colour System in AV Mode 23 Resetting TY sce ocean ee RR te SS 23 Using the Audio Video Input Jacks 24 Using the DVD Inputs Jacks 25 Using the Audio Video Output Jacks 26 Helpful Hints Problems Solutions 37 Authorized SANYO Service Centers 28 FEATURES OU G ee bk G 181 channel frequency synthesizer tuner Cable ready Plug amp Play Automatic Setting Up Channels Automatic channel search with manual skip Digital picture controls with on screen display Picture mode Personal Dynamic Natural Eco Game Selection Audio Video inputs Monitor output On
18. er VCR s video input jack refer to the VCR owner s manual e Connect the audio output from TV to another VCR s audio input jack Note The audio left channel and right channel which were inputted from AV Input Jacks are mixed and are outputted from Monaural Audio Monitor Output Jack BACK OF VCR CABLE INPUT S VIDEO R AUDIO L VIDEO CH4 OUTPUT A V JACKS TERMINAL fx KN m po TV MONITOR To record TV programme select TV mode To dub video from the Input terminal by pressing the TV AV key select AV mode by pressing the TV AV key 19 TV mode 26 HELPFUL HINTS Problems Solutions BEFORE REQUESTING SERVICE CHECK THE FOLLOWING CHART Problem Check these Conditions Try these solutions e TV will automatically switch off Press POWER key TV turns off See pages 10 19 and 20 e Turn off the TV with the automatically e Power surge protection feature MAIN POWER switch momentarily e Check antenna connections e Adjust antenna No picture or e May be station trouble e Try a different channel poor picture e Possible interference from e Press IMAGE key to select household appliance NATURAL picture mode e Brightness or Contrast misadjusted See page 18 e Check if program is in color e Try a different channel e Check antenna connections e Adjust antenna
19. itching off the TV by pressing the Mains Power Switch will also cancel the ON TIMER settings ON TIMER Setting Mode 20 SETTING OF THE PRIVATE POSITION Private position is used to restrict of channel positions that you do not want others to watch Any position can be set as the Private position HOW TO SET PRIVATE POSITION For example to set the channel 15 as the private position 1 Select channel 15 2 Press and hold the DISPLAY key for more than 2 seconds 3 Press MENU key 4 The picture will disappear and 15 will be display on the screen The private position setting is now completed TO VIEW A CHANNEL ON PRIVATE POSITION 1 Select private position In this case channel 15 2 Press and hold the DISPLAY key for more than 2 seconds 3 Press the DISPLAY key once again for watching a TV programme Note The position 15 is still in the private position 15 Press and hold DISPLAY key Press MENU key to active it 15 15 Press and hold DISPLAY key 15 Press DISPLAY key to watch it 15 21 CANCELLING THE PRIVATE POSITION 1 Select private position In this case channel 15 2 Press and hold the DISPLAY key for more than 2 seconds Press and hold DISPLAY key 3 Press the MENU key once again for watching a TV programme 15 The private position is now cancelled Press MENU key to watch it 1 CHECKING THE C
20. kground let you know which mode you have selected To select another mode use the CHANNEL A up or CHANNEL down key After making your selection press the VOLUME or VOLUME key to enter to each adjustment menu Now use the VOLUME or VOLUME key to make adjustments to your selection If you wait too long to make selection the menu will disappear usually after 15 seconds Just press MENU twice to return to where you were Now you can finish your selections Once you have completed your selections and you want to clear the menu from the screen press MENU or wait for about 15 seconds 13 CHANNEL SETUP MENU Your TV can receive 181 channels Off Air VHF 2 13 and UHF 14 69 or Cable 1 125 The available channels are stored in the channel scanning memory in this TV Make sure that your antenna is connected to the TV before setting the Antenna Mode or resetting the Channel Search SETTING THE ANTENNA MODE mur 1 Press MENU The Main Menu will appear See page 13 2 Press the CHANNEL A up or V Select CHANNEL and press VOLUME down key to select PRESET Or then press the VOLUME or key 3 Press the CHANNEL A up or V down key to select ANTENNA 4 Use the VOLUME or key to select CABLE Select either VHF UHF VHF channels 2 13 and UHF channels 14 69 or CABLE channels 1 125 The Cable indicator G appears with the channel MisELECT ADJUST number For examp
21. le C 34 M Exit Select Antenna mode RESETTING CHANNEL SEARCH You can automatically program the tuning system of this TV to scan only the channels available in your area Then when you press one of the CHANNEL SCANNING A V keys the TV will select only those channels 1 Press MENU The Main Menu will appear See page 13 2 Press the CHANNEL A up or V down key to select CHANNEL SENS blu then press the VOLUME or key CHANNEL 02 3 Press the CHANNEL A up or awe me V down key to select SEARCH 4 Use the VOLUME or key to select START Starting automatic channel search The TV will begin searching through the channels After the search is completed the lowest available channel will be selected Note If additional channels become available you move to another city or cable is installed perform another channel search 14 SKIPPING CHANNELS When there is a channel you do not use Channel 4 for example by setting the SKIP Channel function it is possible to jump over this channel when you are selecting a channel using the CHANNEL A up or V down key For example to set channel 4 as Skip channel 1 Press MENU The Main Menu will appear See page 13 2 Press the CHANNEL A up or V down key to select PRESET then press the VOLUME or key 3 Press the CHANNEL A up or V down key to select CHANNEL 4 Select channel
22. o display C 1 then press the other two numbers in sequence VOLUME Keys Press to adjust the volume level The volume indicator will appear on the Screen BASS EXPANDER AVOLUME 40 ON V GUIDE Key This key could not be operated RESET Key Press this key to reset the TV to factory settings See page 23 SLEEP Key Use this key to set off timer on timer on channel number by on timer See page 19 20 CONNECTING THE ANTENNA OR CABLE To obtain the best possible picture use a quality antenna system Inspect your antenna system for loose connections broken wires cracked insulation or other potential problems These conditions can cause poor reception AUTOMATIC POWER SHUT OFF The TV will switch off automatically after 10 minutes if a signal is not being received This feature is not active while the AV mode is selected CONNECT YOUR ANTENNA OR CABLE Identify the type of antenna and antenna wire you have then follow the diagram shown on page 11 VCR CONNECTION The antenna signal must be connected to your VCR antenna input With connect the VCR output to the television Refer to the VCR owner s manual for details Note The VCR can be connected to your TV using the A V jacks See pages 11 24 26 for Using the Audio Video Jacks 10 CABLE CATV SYSTEM ANTENNA OPTIONS COMBO BACK OF COMBO UHF VHF UHF VHF CABLE BOX IF NEEDED WN CH3 CH4 E our 3000
23. s button used to select mode or or 100 Front AUDIO VIDEO INPUT Jacks Connect to the audio video output jacks of your external video equipment such as camcorder or VCR etc to these jacks See page 24 26 Note Model ST 215F1 ST 21SF1K is not equipped with Front AV2 input terminal REMOTE CONTROL The remote control uses an invisible infrared light beam to operate the TV Objects between the TV and the remote can block this light beam Therefore for correct operation the remote control must be pointed directly at the front of the TV with no obstructions Point at the Front of TV T INSTALLING BATTERIES The remote control requires two AA batteries supplied e Remove the battery compartment cover 1 e Install batteries to match the and pie marks inside case Incorrectly 8 WD 2 installed batteries can damage the PECAN Ne remote control I O e Replace the battery cover Remove the batteries if the remote 7 control will not be used for a month or 10 5 CI more Weak batteries may leak and cause damage Normal battery life is roughly six months 11 V GUIDE SLEEP MUTE 21 6 RESET SURROUND ne 7 14 SANYO JXMRL Battery Cover Do not expose batteries battery pack or batteries installed to excessive heat such as sunshine fire or the like REMOTE CONTROL
24. that you want to skip with the VOLUME or key for this example is channel 4 For cable channels above 99 press and hold the 1 key until C1 appears Then press the other two digits 5 Select SKIP by pressing the CHANNEL A up or V down key 6 Press the VOLUME or key to set SKIP to ON To cancel Skip Channel function set to OFF 7 Select MEMORY by pressing the CHANNEL A up or V down key 8 Press the VOLUME or key to memorize 9 Press MENU key to exit VHF UHF START Select CHANNEL that you want to SKIP VHF UHF START Select SKIP by pressing CHANNEL A up or V down key v ANTENNA VHF UHF SEARCH START CHANNEL 04 OFF MEMORY Select MEMORY by pressing CHANNEL A up or V down key v VHF UHF START 04 ON Press Volume or key to memorize v VHF UHF START 04 ON 15 PICTURE ADJUSTMENT MENU This feature is used to adjust the color brightness contrast tint sharpness and white tone to your personal preferences PICTURE ADJUSTMENTS 1 Press MENU The Main Menu will appear See page 13 PRESET 2 Press the CHANNEL A up or V down key to select PICTURE 3 Press VOLUME or key The Manual Adjustment menu will appear 4 Press the CHANNEL A up or V down key to select the control you want to adjust lect PICTURE M 5 Use the VOLUME or key to adjust the control b 4 Use the chart
25. ystem will be started After completing this procedure the lowest available programme position is selected and the ending messages on the screen Note The Plug amp Play can be cancelled at any time by pressing the MENU button 2 Press any of the control buttons to make the ending message disappear Or will automatically return to normal TV display after 10 seconds This procedure only appears at the first switch on time B if no TV stations are found the display shown below will appear Please check if the antenna is connected properly NO STATION If it isn t connected properly connect PLEASE CONNECT ANTENNA PLUG antenna and Automatic Tuning will be reset 12 ON SCREEN MENU SYSTEM The On Screen Menu System allows the viewer to program television features to their personal preference Adjustments can be made by using the keys either on the TV front panel see pages 6 and 7 or on the remote control see pages 8 and 9 Read this page for information on selecting menus The system has 3 different modes PICTURE COLOR BRIGHTNESS CONTRAST TINT SHARPNESS and WHITE TONE AUDIO BASS TREBLE BALANCE BASS EXPANDER ON OFF and PRESET ANTENNA SEARCH M EXIT CHANNEL SKIP and MEMORY Main Menu GENERAL OPERATION To open the Main Menu press MENU on the remote control or on the TV front panel You will notice that PICTURE is in yellow and is indicated by the blue background The blue bac
Download Pdf Manuals
Related Search