Home

Sanyo DP42410 User's Manual

1. E3 amp 2 Move EX Enter Channel List E3 amp AMove ED ESEnter ERetum GUExit INITIAL CHANNEL SCAN NOTE Skip the following process if there is no cable or antenna being plugged in to tuner connector 8 Use the CURSOR A UP and Y Down buttons to Analog Channels found 0 highlight the Channel Scan Press the OK button Digital Channels found O Choose the Scan to start the channel scanning The scanned channels are stored in channel List and can be scanned using the CURSOR UP and V Down buttons AUTO CHANNEL SEARCH Now Searching Please Wait 12 ADVANCED AV CONNECTIONS ADVANCED DIGITAL SIGNAL CONNECTIONS HDMI TO HDMI Connect compatible Digital devices such as a HD Cable Box HD Satellite Receiver DVD Player and Game System HDMI High Definition Multimedia Interface This is an all digital AV interface that accepts uncompressed video signals for the best picture quality possible It supports HDCP copy protection allowing transmission of copy protected digital content The signal can also include Dolby Digital or PCM audio when available 1 Connect a HDMI cable to the HDMI input and to your external device Cable is not supplied NOTE Press the INPUT button to step through the signal inputs to select HDMI1 HDMI2 or HDMI3 DVI TO HDMI ONLY HDMI1IS COMPATIBLE WITH THIS FUNCTION 1 Use an adapter not supplied
2. Can English Can French Region Name EA G3Enter 9 Return Exit This SANYO television is equipped with an electronic V Chip to interpret MPAA Motion Picture Association of America and TV Parental Guidelines rating codes When these codes are detected the HDTV will automatically display or block the program depending upon choices you make when setting up the PARENT menu Use this feature to automatically block programs with content you deem as inappropriate for your children to view MORE INFORMATION Additional information about MPAA and V Chip rating can be found at www mpaa org and www v chip org respectively PASSWORD SETTING You will need to set a passowrd when using this TV and entering the PARENT menu for the first time Enter this password to access the PARENT menu from the second time 1 Press the MENU button and then use the CURSOR lt buttons to highlight PARENT mode Press the OK button 2 Use the 0 9 buttons to enter NEW PIN the new password you want to assign Press the OK button 3 Use the 0 9 buttons to enter Confirm numbers Press the OK button NOTE Please carefully remember new password If you forget the former password press 1 button 4 times to reset password Change password OPERATION 1 Press the MENU button and then use the CURSOR 4 gt buttons to highlight PARENT mode Press the OK button 2 Enter password If the password is correct it will auto
3. Language Choose from English Fran ais and Espa ol for the on screen display of menus and messages 1 Press the MENU button on the remote control to display the Main menu 2 Use the CURSOR 4 buttons to highlight SYSTEM Press the OK button 3 Use the CURSOR UP and Y Down buttons to ighlight Language option Press the OK button se the CURSOR A UP and Y Down buttons to elect English Frangais or Espanol Press the OK utton A red hook will appear in the squared and blank region TIME ZONE OPERATION Time Zone Choose from six categories in different location U S A of Eastern Central Mountain Pacific Alaska and Hawaii for your choice of setting all displayed time zone on all ON Screen Menu 1 Press the MENU button on the remote control to display the Main menu 2 Use the CURSOR lt buttons to highlight SYSTEM Press the OK button 3 Use the CURSOR UP and Y Down buttons to highlight Time Zone Press the OK button Use the CURSOR UP and Y Down buttons to select Eastern Central Mountain Pacific Alaska or Hawaii Press the OK button A red hook will appear in the squared and blank region SLEEP OPERATION Sleep Choose from Off 30 min 60 min 90 min 120 min 150 min and 180 min for your choice of setting the counting down of time you desire the HDTV to be turned off by itself The default setting is Off 1 Press the MENU button on the remote control to
4. 60 37 88 40 1024x768 60 48 36 65 1360x768 60 47 712 85 5 1280x768 60 47 78 79 5 SXGA 1280x1024 60 63 981 108 NOTE In principle the TV can not display signal modes not described in the above column However it can sometimes display a signal very similar with one of the modes described a tis not the trouble of the TV if interference appears on the picture while switching the signal mode The Dot Clock of the computer s signal must be less than 108 MHz a When the input signal from PC is out of the PC signal mode column above No Support caution message will display But in some case the LCD TV will still display the PC signal though the signal mode doesn t exist on the list above Under this condition the display position may not correct and the quality may not be admitted also When input signal is digital from HDMI terminal refer to the chart below SYSTEM MODE Resolution V Freq Hz H Freq KHz PIXELS CLOCK MHz 4801 720 1440 480 59 94 15 73 27 480 720 480 59 94 31 47 27 1280 720 10801 60 1920 1080 60 33 75 74 25 1080 24 1920 1080 24 27 74 25 1080 60 1920 1080 60 67 5 148 5 29
5. CONTROLS AND JACKS 8 REMOTE CONTROL OPERATION 9 GETTING STARTED CONNECTIONS 10 POWER CONNECTION eene 11 INITIAL SetUp ecu iaco oui 11 INITIAL CHANNEL SCAN 11 GETTING STARTED POWER CONNECTION CHANNEL SEARCH 11 ADVANCED AV CONNECTIONS 12 ADVANCED DIGITAL SIGNAL CONNECTIONS HDMI TO HDMI 12 DVI TO DM aint 12 Only HDMI1 is compatible with this TUNCUON epe 12 DIGITAL AUDIO 12 AUDIO OUT JACKS eese 12 PC CONNECTIONS 13 PC MONITOR OPERATION 13 SPORTS MODE 14 ON SCREEN MENU OPERATION 15 MENU NAVIGATION 15 CHANNEL 15 CHANNEL LIST OPERATION 16 PARENT ADJUSTMENT nenne 17 PICTURE AUDIO ADVANCED ADJUSTMENT eee 19 PICTURE senes nennntntntatnnnns 19 nwuso 19 22 USB PHOTO VIEWER e 24 HELPFUL HINTS PROBLEMS SOLUTIONS 27 SPECIFICATIONS 28 CONFIGURATIONS OF
6. INFO OPERATION System Info Allows your checking the record of the Firmware Code version and release Date kept in your HDTV memory 1 Use the CURSOR lt buttons to highlight SYSTEM Press the OK button 2 Use the CURSOR A UP and Y Down buttons to highlight System Info Press the OK button 3 Use the MENU button to return to SYSTEM menu or use the EXIT button to close the ON Screen menu USB PHOTO VIEWER USB Photo Viewer Settings MEDIA BROWSER OPERATION 1 Press the INPUT button on the remote control and use the CURSOR A UP and Y Down buttons to highlight USB Press the OK button 2 Use the CURSOR A UP and Y Down buttons to highlight Media Brower Press the OK button Use the CURSOR A UP and Y Down buttons to select JPEG file or JPEG folder Press the OK button SINGLE VIEW Open 1 Use the CURSOR A UP and Y Down buttons to select Open Press the OK button Thumbnail Slideshow 2 Use the CURSOR A UP and Y Down buttons to select JPEG file Press the OK button 050222 1 JPG 3 Use CURSOR A UP and Y Down buttons can rotate the image NOTE CURSOR A UP button can rotate view clockwise CURSOR Y Down button can rotate view counterclockwise 4 Press OK button can zoom in x2 and press OK button again can zoom in x4 Press EXIT button can minify the image and press exit again can to original size Note CURSOR 4 Y Down buttons can sc
7. INPUT 9 Stereo Audio Out L R Jacks PAGE 12 Connect stereo audio equipment to these jacks USB port PAGE 24 Used for updating the television s firmware and access JPEG file REMOTE CONTROL OPERATION D MUTE Button Press to mute or restore the sound 2 Numeric Buttons Press numeric buttons to select a channel Example Press 6 then OK button to select analog channel A6 Press 6 then 1 button to select digital channel D6 3 INPUT Button Press to select the source to view TV VIDEO1 VIDEO2 VIDEO3 HDMI1 HDMI2 HDMI3 PC or USB Input 4 SPORTS Button Press to choose between options Football Winter Sports Marine Sports Indoor Sports and Off in turn See page 14 5 ECO Button Press to Energy saving mode between options Off ECO1 ECO2 and ECO3 in turn 6 Volume Buttons Press VOL to decrease or increase the audio volume PIX SHAPE Button Press to choose between options Standard WaterGlass Zoom1 Full and Zoom2 Available options depend on the signal and the broadcast s aspect ratio AUDIO Button Press to select the desired audio mode if available 9 MENU Press to display on screen menu CURSOR A up Y down Buttons Press these buttons to move the cursor up and down CURSOR lt left gt right Buttons Press these buttons to move the cursor left and right OK Button Press to select an option from the menu system when required EXIT Button Press
8. Source Air Signal Type All Channel Scan Channel List KBE Move GVEnter Return Exit Page Edit 1 2 3 4 Use the CURSOR A UP and Y Down buttons to highlight the Channel List Press the OK button Use the CURSOR lt gt buttons to change pages Use the CURSOR A UP and Y Down buttons to select and highlight the channel you want to delete Press the VOL button to delete the channel from the Channel List A white Y will disappear in the squared region This means the channel has been deleted from the Channel List RENAMING CHANNELS FROM THE CHANNEL LIST You can rename each channel of the Channel List with following operation 1 Use the CURSOR A UP and Y Down buttons to highlight the Channel List Press the OK button Use the CURSOR lt buttons show more unshowed channels Use the CURSOR A UP and Y Down buttons to select and highlight the channel you want to rename Press the INFO button Use 0 9 buttons to type the channel renaming with each appointed English word numbers and symbols by continuously pressing HINT Use CURSOR gt buttons to move forward and backward Use 1 button to delete Press the INFO button to confirm ES Ed Ed Ed Ed ES KD Move 8 Back OK JKLikI5 2 acaba 7 E e 4 9 1 MNOmno6 A D 3 2 4 ON SCREEN MENU OPERATION CONTINUED PARENT ADJUSTMENT Change password Lock TV Rating MPAA
9. VGA TERMINALS 29 PC HDMI SIGNAL MODES 29 INSTALLING AND UNINSTALLING STAND A CAUTION INSTALLING STAND Handling with two people is recommended when installing When holding moving or lifting the LCD Display hold the display s body Do not handle the LCD TV by holding the attached accessory parts speakers otherwise it may result in damage Before installing provide a desk or a part of it which is strong enough to support the weight of the LCD TV and its stand The desk must be larger than the LCD Display s screen size The desk s surface must be flat and covered with soft material such as a blanket for protecting the screen surface Before putting the LCD Display on the desk make sure there is no object on it Leaving any object under the Screen may cause damage on the screen The LCD TV with this stand should be installed on a flat and level place Do not place it on non flat unlevel or unstable cart or stand The display may fall causing not only serious damage to the products but serious injury to a person AN SAFETY NOTE For correct installing mounting and uninstalling of the LCD TV Stand it is strongly recommended to use a trained authorized dealer Failure to follow correct procedures could result in damage to the equipment or injury to the installer Installing Stand 42 1 Place the LCD TV on a flat surface place where 2 Secure the stand to the TV with 4 s
10. brightness will automatically be boosted or reduced depending on the room brightness 1 Press the MENU button on the remote control to display the Main menu Use the CURSOR lt gt buttons to highlight ADVANCED Press the OK button 2 3 Use the CURSOR A UP and Y Down buttons to select Light Sensor Press the OK button 4 Use the CURSOR A UP and Y Down buttons to select Off Low Middle or High Press the OK button NOTE The initial setting of Light sensor in the Home mode is High Change this setting to Middle Lowor Off if a picture is too dark in your home OSD DISPLAY TIME OPERATION OSD Display Time 1 Press the MENU button on the remote control to display the Main menu 2 Use the CURSOR lt buttons to highlight ADVANCED Press the OK button 3 Use the CURSOR A UP and Y Down buttons to select the OSD Display Time option Press the OK button 4 Use the CURSOR 4 buttons to choose from 21 English 22 20 Seconds 30 Seconds 40 Seconds 50 Seconds or 60 Seconds Press the OK button NEXT PAGE OPERATION NEXT PAGE Jump to next page menu 1 Press the MENU button on the remote control to display the Main menu 2 Use the CURSOR lt buttons to highlight ADVANCED Press the OK button 3 Use the CURSOR A UP and Y Down buttons to select the Next Page 4 Press the OK button to jump next page 120Hz CONDITION OPERATION 1 Press the MENU button on the remote control to display
11. by the manufacturer and listed by an independent laboratory such as UL 18 Apparatus shall not be exposed to dripping or splashing and no objects filled with liquides such as vases shall be placed on the apparatus When the MAINS plug is used as the disconnect device the disconnect device shall remain readily operable Install the LCD TV in a proper position If not it may result in a fire hazard Provide appropriate space on the top sides and rear of the LCD TV cabinet for allowing air circulation and cooling the LCD TV Minimum clearance must be maintained If the LCD TV is to be built into a compartment or similarly enclosed the minimum distances must be maintained Do not cover the ventilation slot on the LCD TV Heat build up can reduce the service life of your LCD TV and can also be dangerous SIDE and TOP 10 cm 1 e 2 e 2 2 N REAR 6 cm 10 cm 10 cm FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference wil
12. sound output Analog During this setting the audio input signal will be fixed to PC AUDIO INPUT port NOTE Even though the HDMI is pure HDMI type the audio still is selected from the PC AUDIO INPUT port Press the MENU button on the remote control to display the Main menu Use the CURSOR 4 buttons to highlight AUDIO Press the OK button Use the CURSOR A UP and Y Down buttons to highlight HDMI Audio Press the OK button Use the CURSOR A UP and Y Down buttons to select Auto Digital or Analog option Press the OK button A red hook will appear in the white blank space N RESET AUDIO OPERATION Reset Audio It can reset previous adjusting settings during the AUDIO mode to the factory default value 1 Use the CURSOR 4 buttons to highlight AUDIO Press the OK button 2 Use the CURSOR A UP and Y Down buttons to highlight the Reset Audio Press the OK button 3 Use the CURSOR A UP and Y Down buttons to select Reset or Cancel Press the OK button NOTE Press the MENU button to return to the AUDIO menu ADVANCED omg Sports Noise Reduction MPEG NR Dynamic Al Pix Shape Backlight Light Sensor OSD Display Time Next Page Medium Full 30 Seconds EBE3Move amp AGS3Enter Return Exit SPORTS OPERATION See PAGE 14 1 Press the MENU button on the remote control to display the Main menu 2 Use the CURSOR 4 buttons to highlight ADVANCED Pr
13. stored in memory and the menu is modified to include advanced adjustment option 1 2 5 Press the MENU button and then use the CURSOR lt gt buttons to highlight PARENT Press the OK button Enter your password If the password is correct it will automatically return to PARENT menu If the password is wrong you can enter password again or press the MENU button to return to the PARENT menu Use the CURSOR A UP and Down buttons to highlight Region Name Press the OK button Use the CURSOR A UP and Down buttons to select the option you want to adjust Press the OK button Press the OK button to confirm or cancel the selected setting NOTE If current program stream is without RRT5 data this function will be grayed out This function is only effective for digital channels including RRT5 data PICTURE AUDIO ADVANCED ADJUSTMENT PICTURE E PICTURE Picture Mode Brightness Contrast Saturation Hue Sharpness Color Temperature Video3 Reset Picture EBEMove SERetum GWExit ADJUSTING THE PICTURE LEVELS PICTURE MODE OPERATION 1 Press the MENU button on the remote control to display the Main menu 2 Use the CURSOR 4 buttons to highlight PICTURE Press the OK button 3 Use the CURSOR A UP and Y Down buttons to select the Picture Mode Press the OK button Use the CURSOR A UP and Y Down buttons to select the Cinema Standard Vivid or User Press the O
14. the Main menu 2 Use the CURSOR lt buttons to highlight ADVANCED Press the OK button 3 Use the CURSOR A UP and Y Down buttons to select the 120Hz Condition option Press the OK button 4 Use the CURSOR A UP and Y Down buttons to select On or Off Press the OK button NOTES When you select to PC source or USB mode the120Hz CONDITION default setting is set to Off RESET ADVANCED OPERATION Reset Advanced Reset the previous adjustment settings under the ADVANCED mode to the factory default value Use the CURSOR lt buttons to highlight ADVANCED Press the OK button 2 Use the CURSOR A UP and Y Down buttons to highlight Reset Advanced Press the OK button Use the CURSOR A UP and Y Down buttons to select Reset or Cancel Press the OK button NOTE Press the MENU button to return to the previous ADVANCED menu PREVIOUS PAGE OPERATION PREVIOUS PAGE Return to previous page 1 Press the MENU button on the remote control to display the Main menu 2 Use the CURSOR lt buttons to highlight ADVANCED Press the OK button 3 Use the CURSOR A UP and Y Down buttons to select the Previous Page 4 Press the OK button can return to previous page SYSTEM 3 0 fa SYSTEM English Eastern off cc1 csi Language Time Zone Sleep Analog CC Digital CC CC Style Setting Reset System Default System Info EAGSEnter Return Exit LANGUAGE OPERATION
15. the Remote A PRECAUTIONS Do not use rechargeables together with dry cells other types mixed new and old or batteries with different charge levels Do not expose the Remote or batteries to moisture or heat such as sunshine the size of battery is AAA Match the and signs on the batteries with marks inside the Remote Control e Please recycle used up rechargeable batteries 2 Antenna Connection for off air signals X ANALOGIDIGITAL p T ANTENNA IN lt ANTENNA gt 0D THE TUNER IN THIS HDTV CAN RECEIVE a Digital and Analog off air signals from an antenna OR b Analog or Clear QAM cable channels from a direct Cable TV connection NOTES You must use the on screen MENU to Search for Clear QAM Cable channels see page 11 For the best picture connect your Cable box or Satellite receiver to HDMI or component VIDEOS jacks This HDTV can receive ANY unscrambled RF signal being broadcast GETTING STARTED CONTROLS AND JACKS LEFT SIDE PANEL Power button JJ Channel a vbuttons buttons Menu button Input button Volume al l HDMI port VIDEO2 port S Video Input VIDEO1 PAGE 10 To enhance video detail use the S Video jack instead of the Video jack if available on your external equipment An S Video connection will override a connection to the Video1 input jack 2 Comp
16. to connect a DVI device to a input jack NOTE HDMI Audio setting is necessary refer page 20 2 Connect the audio out of the device to the PC AUDIO INPUT BACK SIDE VIEW OF HDTV SATELLITE RECEIVER DIGITAL AUDIO 1 Connect the Digital Audio output to a multichannel receiver as shown NOTE Dolby Digital audio signal is available from the Digital Audio output terminal only when received as part of a Digital Antenna input being viewed on the screen BACK SIDE VIEW OF HDTV Coaxial DIGITAL AUDIO CABLE Not supplied PCINPUT MULTICHANNEL RECEIVER AUDIO OUT JACKS 1 Connect the Audio output to a multichannel receiver as shown BACK SIDE VIEW OF HDTV PCAUDIO Cable not supplied STEREO AMPLIFIER PC CONNECTIONS NOTE Before connecting any cables disconnect the AC Power Cords of both the HDTV and Personal Computer from the AC outlets 1 Connect an RGB cable from the monitor output on your PC to the RGB connector on the HDTV and tighten the screws Monitor Cable not supplied 2 Insert one end of a Stereo Mini Audio cable into the PC Audio Out jack and the other end into the HDTV PC AUDIO INPUT jack Stereo Mini Audio Cable not supplied HINT Volume can be adjusted both from the PC and the HDTV VOLUME and buttons 3 Select Auto Adjustment from the PC Setup Menu NO
17. K button Enter your password If the password is correct it will automatically return to PARENT menu If the password is wrong you can enter password again or press the MENU button to return to PARENT menu Use the CURSOR A UP and Y Down buttons to highlight Can English Press the OK button Use the CURSOR A UP and Y Down buttons to select the setting you want to adjust and press the OK button A white mark will appear in the squared region CANADIAN FRENCH OPERATION 1 Press the MENU button and then use the CURSOR lt gt buttons to highlight PARENT Press the OK button Enter your password If the password is correct it will automatically return to PARENT menu If the password is wrong you can enter password again or press the MENU button to return to PARENT menu Use the CURSOR A UP and Y Down buttons to highlight Can French Press the OK button Use the CURSOR A UP and Y Down buttons to select the setting you want to adjust and press the OK button A white mark will appear in the squared region NOTE Press the OK button to make or cancel the selected settings A lock symbol will appear beside the selected rating option indicating that it is blocked REGION NAME OPERATION Region Name Region Name for V Chip Regional Rating 5 RRT5 is an advanced V Chip ratings system for digital channels that are received with an antenna When the HDTV detects compatible RRT5 data it is downloaded and
18. K button to add a red hook in the blank space BRIGHTNESS CONTRAST SATURATION HUE SHARPNESS OPERATION 1 Press the MENU button on the remote control to display the Main menu 2 Use the CURSOR gt buttons to highlight PICTURE Press the OK button 3 Use the CURSOR A UP and Y Down buttons to select the Brightness Contrast Saturation Hue or Sharpness Press the OK button 4 Use the CURSOR lt gt buttons to adjust the picture setting NOTE These items will be grayed out if you are not select the User mode User mode Picture Mode will allow to adjust brightness contrast saturation hue and sharpness function by user COLOR TEMPERATURE OPERATION 1 Press the MENU button to display the Main menu Press the OK button 2 Use the CURSOR 4 buttons to highlight PICTURE Press the OK button Use the CURSOR A UP and Y Down buttons to highlight Color Temperature Press the OK button 4 Use the CURSOR A UP and Y Down buttons to select Warm Normal or Cool Press the OK button VIDEO3 OPERATION 1 Press the MENU button to display the Main menu Press the OK button 2 Use the CURSOR 4 buttons to highlight PICTURE Press the OK button 3 Use the CURSOR A UP or Y Down buttons to highlight Video3 Press the OK button 4 Use the CURSOR A UP and Y Down buttons to select YPbPr or Video Press the OK button RESET PICTURE OPERATION Reset Picture Make the previous adjustment settings
19. PFUL HINTS Problems Solutions If you are having problems with your HDTV check this Before returning your HDTV please visit our trouble shooting chart to find one or more possible website at http ca sanyo com or call us toll free at solutions 1 800 263 2244 We can Help Check these Conditions Try these Solutions Check the antenna external Adjust antenna connections e Try a different channel No picture sound There may be a station trouble no Execute Channel Scan in the Digital Picture signal broadcast CHANNEL menu Set Signal Type MUTE function may be turned ON to All Adjust Volume Check if station is broadcasting a Press the CAPTION button to No Caption Closed Caption signal select captioning mode Select another channel Check if the program is in color Try a different channel Check the antenna external Adjust the antenna Poor Picture Sound connections Execute Reset Picture in the watching Analog Color or Tint may be misadjusted PICTURE menu There may be a station trouble Adjust the Volume and or Image MUTE function may be turned ON Check the Audio Video Press the INPUT button on the connections remote control Check the external equipment connections No Signal message phen E Check the external equipment settings Check the antenna connection Pixilation of Digital e Press the INFO button and check Turn antenna install signal booster 7 41 image signal s
20. PTIONS SIGNAL SOURCE OPERATION Picture Mode There are two categories Brightness e Cable Contrast AlR Antenna Search It will search for analog and digital PICTURE Sports channels that are broadcasted over the air NECS Noise Reduction Cable eid LT oa darum and MPEG NR unscrambled Clear QAM digital cable channels Video 3 Dynamic Al 1 Press the MENU button on the remote control to E ADVANCED a uttons to highlight Press the utton OSDDipayTme 2 Highlight Air or Cable Press the OK button reble BaSS 3 Use the CURSOR and Y Down buttons AUDIO Balance to highlight All Press the OK button Ared hook Bass Boost will appear beside the select item Previous Page HDMI Audio 4 Use the CURSOR A UP and Y Down buttons Reset Audio Signal Source to highlight Channel Scan Press the OK button Signal Type Choose the Scan to start the channel scanning CHANNEL Channel Scan Change P
21. Press the INPUT button to step through the signal inputs to select VIDEOS YPbPr NOTES The Green video jack and White Red audio jacks can be used as Composite connectors like VIDEO1 and VIDEO2 Shared with Component Y You may follow the VIDEO3 OPERATION See PAGE 19 to choice suitable function Video or YPbPr for external devices PCAUDIO INPUT INPUT2 DVD PLAYER SATELLITE RECEIVER TON SS I e A PC AUDIO INPUT GETTING STARTED POWER CONNECTION CHANNEL SEARCH POWER CONNECTION aoe E CHANNEL 5 Plug in AC power cord 120V AC 60Hz Signal Source Signal Type Channel Sca Cable 6 Pressthe POWER Channel List button Follow the on screen instructions To 120V AC outlet E3 amp AMove GSEnter Return Exit INITIAL SETUP 75 A 7 Use the CURSOR A UP and Y Down buttons to f d highlight Store or Home Press the OK button TVs CHANNEL will enter INITIAL CHANNEL SCAN automatically i Air Store This mode is for the retail display setup Channel Scd Analog Home This mode qualifies for ENERGY STAR Channel List 7 Digital Please select the proper location for your TV the display will be adjusted for best result E3 amp AMove KDGSEnte PReturn amp Exit TIN CHANNEL Signal So Air Signal Type All Store mode is for the retail display setup Home mode qualifies for ENERGY STAR
22. SANYO Owner s Manual 4 Table of Contents Manual del usuario 32 Tabla de contenido 99 1080p HDTV LCD TV HD 1080p de LCD TV HD 1080p ACL DP42410 Model No No de Modelo 2010 Sanyo Manufacturing Corporation Part No No de parte HDA69B42201 Thank you for choosing SANYO Please read all instructions to obtain maximum benefit of your product CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITH THIS UNIT THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE OWNER S MANUAL WITH THIS UNIT WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE IMPORTANT SAFETY INSTRUCTIONS Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with a dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type pl
23. Sanyo Electric co Ltd has determined that this product meets the Energy Star guidelines for energy efficiency This symbol on the nameplate means the product is Listed by Underwriters uus Laboratories Inc It is designed and manufactured to meet rigid U L safety LISTED standards against risk of fire casualty and electrical hazards PROTECTING THE LCD SCREEN Ah HANDLING PRECAUTIONS The screen can be damaged if it is not maintained Handle by the cabinet only Never touch the screen properly Do not use hard objects such as hard when handling cloth or paper Do not use excessive pressure when e Excessive pressure on the screen can cause cleaning the screen excessive pressure can cause permanent discoloration or dark spots permanent discoloration or dark Handling damage is not covered under warranty Spots NEVER spray liquids on the CONTAINS MERCURY LAMPS screen DISPOSE OF PROPERLY CONTENTS IMPORTANT SAFETY INSTRUCTIONS 2 FCC INFORMATION 3 ENERGY STAR USER INFORMATION 3 TRADEMARKS 3 PROTECTING THE LCD SCREEN 3 HANDLING PRECAUTIONS 3 INSTALLING AND UNINSTALLING 5 INSTALLATION 6 POSITIONING THE LCD 6 WALL MOUNTING OPTIONAL 6 GETTING STARTED 7 PReCAUTIONS E GETTING STARTED
24. T button on the remote control to exit the current menu PC MENU OPERATING TIPS The Picture settings in the PC input do not affect other input settings 13 14 SPORTS MODE By simply pushing the SPORTS button on the remote control the TV will automatically optimize both picture amp sound settings for the programs shown a Off a Football For golf football programs etc Fresh greenness of the lawn Enfolding cheering voices ball hitting sounds Winter Sports For skiing ice skating programs etc Details kept white vivid color of costume Enhanced skiing skating sounds Marine Sports For swimming diving programs etc Sparkling blue of sea azure sky Delightful splashing and surf sounds Indoor Sports For basketball boxing programs etc Alive reddish flesh Clear announcements powerful banging sounds SPORTS button NOTE When the SPORTS button is pushed an OSD showing the current sports mode will appear on the the bottom left of the screen Once the channel or the input source is changed the sports mode will automatically be set to Off and the Sports Off OSD will appear on the top right of the screen If the channel or input source is changed under the Sports status the Sports Off OSD will not appear on the top right of the screen ON SCREEN MENU OPERATION MENU NAVIGATION MAP CHANNEL ADJUSTMENT MAIN MENU SUB MENU O
25. TE Power on the HDTV and any other peripheral equipment before powering on the computer PC MENU NAVIGATION MAP Auto Adjust H Position PC V Position Clock Phase PC MONITOR OPERATION PC PREPARATION To avoid a No Support condition preset your PC s output resolution to an XGA value such as 1024 x 768 before you disconnect it from your regular monitor Auto Adjust H Position V Position Clock Phase EBE3Move amp AGS3Enter Return amp gExit PC MENU AUTO ADJUSTMENTS OPERATION 1 Use the CURSOR A UP and Down buttons on the remote control to highlight the Auto Adjust in the PC menu mode Press the OK button 2 Highlight Auto Adjust and press the OK button to start the automatically adjust function PC MENU MANUAL ADJUSTMENTS OPERATION The Clock Phase Horizontal Position and Vertical Position are set automatically when Auto Adjustment is completely done Clock Adjust the Dot frequency to match the dot frequency of your computer Phase Adjust the phase when the picture appears to flicker or blur H Position Move the image horizontally V Position Move the image vertically 1 Use the CURSOR A UP and Y Down buttons on the remote control to highlight H Position V Position Clock or Phase Press the OK button 2 Use the CURSOR 4 buttons to adjust the setting value Press the MENU button to return 3 Press the EXI
26. Treble Bass or Balance Press the OK button 4 Use the CURSOR lt buttons to adjust the audio setting BASS BOOST OPERATION 1 Press the MENU button on the remote control to display the Main menu 2 Use the CURSOR 4 buttons to highlight AUDIO Press the OK button 3 Use the CURSOR A UP and Y Down buttons to highlight Bass Boost Press the OK button 4 Use the CURSOR A UP and Y Down buttons to highlight Off Low or High Press the OK button SURROUND OPERATION 1 Press the MENU button on the remote control to display the Main menu Use the CURSOR lt buttons to highlight AUDIO Press the OK button 2 3 Use the CURSOR A UP and Y Down buttons to highlight Surround Press the OK button 4 Use the CURSOR A UP and Y Down buttons to highlight Off Low or High Press the OK button HDMI AUDIO OPERATION HDMI AUDIO SETTINGS includes three categories Auto Digital and Analog Default setting is Auto For the other HDMI port the HDMI Audio setting will be blocked out and fixed in Digital Auto During this setting the system will analyze HDMI signal type by info frame to detect if this input Source is pure HDMI or DVI signal Then it will select the audio input signal from HDMI port or PC AUDIO INPUT port automatically refer to page 13 Digital During this setting the audio input signal will be fixed to the HDMI1 port NOTE If the HDMI is a DVI signal type there will be no
27. and Y Down buttons to select next page JPEG file Press the OK button 4 Use the EXIT button to exit this function SLIDESHOW 1 Use the CURSOR A UP and Y Down buttons to select Slideshow Press the OK button 25 26 PHOTO VIEWER SPECIFICATIONS USB memory Should be a flash memory type with USB mass storage Playable media No support for USB HUB Maximum number of files 10000 Maximum number of 1000 folders File path Up to 260 characters JPEG Base Line format Supported with English file name Image file format Progressive JPEG 2000 Uncompressed Not supported 4069x2160 Width x Height or less x 1 16 Zoom out limit Larger than 4096x2160 Width x Height and 8192x4320 Width x Height or less x 1 32 Larger than 8192x4320 Width x Height x1 64 _ amp Q Number 0123456789 Alphabet ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijkImnopqrstuvwxyz Character code supported in file system library No operation is guaranteed for use Symbol only as a directory name or file name NOTES Connectivity is not guaranteed for all devices Gently insert the USB device into the port and do no remove while viewing Media Player USB device USB Mass Storage Class device MSC Connect the USB device to the TV directly Do not use a USB Hub You must obtain any required permission from copyright owners to use copyright content SANYO cannot and does not grant such permission HEL
28. assword Channel List Lock ip ME 0 EL TV Rating PARENT MPAA CHANNEL Can English Signal Source Air Can French Auto Adjust M All Region Name H Position Channel List PC V Position Language Clock Time Zone Phase Sleep Areler S Move E2 G3Enter Return G3jExit SYSTEM Digital CC CC Style Setting Reset System Default System Info Media Media Browser Settings 15 ON SCREEN MENU OPERATION CONTINUED DELETING CHANNELS FROM THE CHANNEL LIST CHANNEL LIST OPERATION The Channel List is a database of active channels you can scan through using the CURSOR A UP and Y Down buttons Customize it by deleting or adding channels 1 2 3 Press the MENU button on the remote control to display the Main menu Use the CURSOR lt buttons to highlight CHANNEL mode Press the OK button Use the CURSOR A UP and Y Down buttons to highlight Channel Scan Press the OK button Make the channel scan process complete the OK button ADDING CHANNELS TO CHANNEL LIST 1 2 3 4 16 Use the CURSOR A UP and Y Down buttons to highlight the Channel List Press the OK button Use the CURSOR lt buttons to change pages Use the CURSOR A UP and Y Down buttons to select and highlight the channel you want to add Press the VOL to add the channel to the Channel List A white Y will appear in the squared region This means the channel is added to the Channel List P 2 Y CHANNEL Signal
29. button 4 Use the CURSOR A UP and Y Down buttons to select CS1 CS2 CS3 CS4 CS5 or CS6 Press the OK button A red hook will appear in the squared and blank region CC STYLE SETTING OPERATION CC Style Setting Caption is a textual information transmitted along with the picture and sound Turning captioning ON causes the HDTV to open these captions Digital or Analog and superimpose them on the screen Local broadcasters decide which caption signals to transmit Digital Captions can be changed by your choice of the CC Style Setting as shown There are several Subcatalogs for each nine categories under the CC Style Setting for your choice of setting the desired caption style superimposed on your HDTV screen CC Setting CC Display Muted On Off CC Priority Automatic Analog CC Digital CC Digital CC Preset Default Custom Font Size Standard Large Small Font Col White Red Green Blue Yellow ibd Magenta Cyan Black Style1 Style2 Style3 Style4 Font Style Style5 Style6 Style7 Edae Type None Raised Depressed Outline SEP L shadow R shadow Edae Color White Red Green Blue Yellow 9 Magenta Cyan Black Backareund Color White Red Green Blue Yellow 9 Magenta Cyan Black 1 Press the MENU button on the remote control to display the Mai
30. crews maintained with soft materials such as a blanket for protecting the display screen UNINSTALLING STAND For correct installing mounting and uninstalling LCD TV Stand it is strongly recommended to use a trained authorized dealer Failure to follow correct procedures could result in damage to the equipment or injury to the installer Uninstalling Stand 42 1 Place the LCD TV screen facing down on a flat 2 Remove screws in 4 holes with screw driver surface with soft materials such as a blanket for protecting the display screen INSTALLATION POSITIONING THE LCD HDTV Always use a firm flat surface when positioning A your HDTV Do not position the unit in a confined area Allow adequate space for proper ventilation 40 8 4 36l ee Diagonal screen 42 02 inches NOTE All dimensions are in inches WALL MOUNTING OPTIONAL Use the screws that are threaded into the stand mounting inserts on the back of your HDTV to secure it to a wall mounting kit NOTE 1 Wall Mounting kit is not supplied 2 Wall mounting kit shall be able to sustain at least 3 times of set weight VESA standard interface TV 200 x 400mm humum T 1 8 Wall Mounting Inserts C2 o Mounting screws measurements 42 TV M4 Diameter Length 13mm min 16mm max Wall 2 60mm GETTING STARTED 1 Install supplied batteries in
31. display the Main menu 2 Use the CURSOR 4 buttons to highlight SYSTEM Press the OK button 3 Use the CURSOR A UP and Y Down buttons to highlight Sleep Press the OK button 4 Use the CURSOR A UP and Y Down buttons to select Off 30 min 60 min 90 min 120 min 150 min or 180 min Press the OK button A red hook will appear in the squared and blank region ANALOG CLOSED CAPTION OPERATION Analog CC Choose from eight types of captions for Analog TV signal for your choice of setting the desired caption type to be displayed with Analog TV signal programs on your HDTV 1 Press the MENU button on the remote control to display the Main menu 2 Use the CURSOR lt buttons to highlight SYSTEM Press the OK button 3 Use the CURSOR A UP and Y Down buttons to highlight Analog CC Press the OK button 4 Use the CURSOR A UP and Y Down buttons to select CC1 CC2 CC3 CC4 TT1 TT2 TT3 or TTA Press the OK button A red hook will appear in the squared and blank region DIGITAL CLOSED CAPTION OPERATION Digital CC Choose from six types of captions for Digital TV signal for your choice of setting the desired caption type to be displayed with Digital TV signal programs on your HDTV 1 Press the MENU button on the remote control to display the Main menu 2 Use the CURSOR lt buttons to highlight SYSTEM Press the OK button 3 Use the CURSOR A UP and Y Down buttons to highlight Digital CC Press the OK
32. ess the OK button 3 Use the CURSOR A UP and Y Down buttons to select Sports Press the OK button 4 Use the CURSOR A UP and Y Down buttons to select Off Football Winter Sports Marine Sports or Indoor Sports Press the OK button NOISE REDUCTION OPERATION 1 Press the MENU button on the remote control to display the Main menu Use the CURSOR lt buttons to highlight ADVANCED Press the OK button 3 Use the CURSOR A UP and Y Down buttons to select Noise Reduction Press the OK button 4 Use the CURSOR A UP and Y Down buttons to select Off Weak Medium or Strong Press the OK button DVD player cable satellite box and digital camera signals usually will not need noise reduction MPEG NR OPERATION 1 Press the MENU button on the remote control to display the Main menu Use the CURSOR lt buttons to highlight ADVANCED Press the OK button 2 3 Use the CURSOR A UP and Y Down buttons to select MPEG NR Press the OK button 4 Use the CURSOR A UP and Y Down buttons to select Off Weak Medium or Strong Press the OK button DYNAMIC AI OPERATION 1 Press the MENU button on the remote control to display the Main menu 2 Use the CURSOR 4 buttons to highlight ADVANCED Press the OK button 3 Use the CURSOR A UP and Y Down buttons to select the Dynamic Al Press the OK button Use the CURSOR A UP and Y Down buttons to select Off Weak Medium or Strong Press the OK butto
33. l not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help CAUTION FCC Regulations state that improper modifications or unauthorized changes to this unit may void the user s authority to operate the unit ENERGY STAR USER INFORMATION ENERGY STAR User Information Statement the factory default settings of this television meet ENERGY STAR requirements Changing Picture Settings may increase energy consumption possibly beyond the limits required for ENERGY STAR qualification To ensure your television is operating at an optimal energy efficiency select default picture mode TRADEMARKS Q DOLBY Manufactured under license from Dolby Laboratories DIGITAL Dolby and the double D symbol are trademarks of Dolby Laboratories HDMI the HDMI logo and High Definition Multimedia Interface are trademarks Horni or registered trademarks of HDMI Licensing LLC in the United States and other countries 7 PA As an Energy Star Partner
34. matically return to PARENT menu If the password is wrong you can enter password again or press MENU button to return to PARENT menu 3 Use the CURSOR A UP and Y Down buttons to highlight Change Password Press the OK button Use the 0 9 buttons to enter the OLD PIN the former password NEW PIN the new password you want to assign and enter Confirm numbers in turn Press the OK button Lock OPERATION V Chip This TV follows the restricted channels broad casting setting within MPAA and TV Rating option in PARENT menu Lock Block the broadcast of the current displayed channel directly or current source input 1 Press the MENU button and then use CURSOR 4 gt buttons to highlight PARENT Press the OK button 2 Enter your password If the password is correct it will automatically return to the PARENT menu If the password is wrong you can enter the password again or press MENU button to return to the PARENT menu 3 Use the CURSOR A UP and Y Down buttons to highlight Lock Press the OK button 4 Select V Chip or Lock Press the OK button TV Rating OPERATION TV Rating Decides which kind of classified channel in the Channel List can be viewed You can block portions of the TV rating by choosing one or more of the content ratings D L S V and FV By blocking just the L and S content ratings of TV 14 for example TV 14 rated programs with a D and or V content rating could still be viewed 1 P
35. n NOTE Please set PICTURE MODE to User then can turn on this function PAGE 19 PICTURE PIX SHAPE OPERATION Pix Shape Divided into three categories The options during the Pix Shape mode change by the detection of HD SD or PC inputs HD Full WaterGlass Zoom1 Zoom2 SD Standard WaterGlass Zoom1 Full Zoom2 PC Normal Full Dot by Dot 1 Press the MENU button on the remote control to display the Main menu 2 Use the CURSOR lt buttons to highlight ADVANCED Press the OK button 3 Use the CURSOR A UP and Y Down buttons to select Pix Shape Press the OK button 4 Use the CURSOR A UP and Y Down buttons to select Standard WaterGlass Zoom1 Full or Zoom2 Press the OK button NOTE The remote controls of HD cable and satellite boxes also have similar zoom choices Try having the TV setting on FULL first and adjust via the cable satellite box s remote control BACKLIGHT OPERATION 1 Press the MENU button on the remote control to display the Main menu 2 Use the CURSOR lt gt buttons to highlight ADVANCED Press the OK button 3 Use the CURSOR A UP and Y Down buttons to select Backlight Press the OK button 4 Use the CURSOR 4 gt buttons to select the desired value between 0 to 50 NOTE This item will be grayed out if you turn on the Light sensor function Please set Light sensor operation to off then can turn on this function LIGHT SENSOR OPERATION Picture
36. n menu Use the CURSOR lt buttons to highlight SYSTEM Press the OK button Use the CURSOR A UP and Y Down buttons to highlight CC Style Setting Press the OK button Use the CURSOR A UP and Y Down buttons to select CC Setting CC Priority Digital CC Present Font Size Font Color Font Style Edge Type Edge Color or Background Color Press the OK button 5 Use the CURSOR 4 buttons to select the above mentioned Subcatalog of the Category Title you want to set Press the OK button gt nm 23 RESET SYSTEM OPERATION Reset System Reset the previous adjustment settings under the SYSTEM mode to the factory default value 1 Use the CURSOR lt buttons to highlight SYSTEM Press the OK butto n 2 Use the CURSOR A UP and Y Down buttons to highlight Reset System Press the OK button 3 Use the CURSOR A UP and Y Down buttons to select Reset or Cancel Press the OK button DEFAULT OPERATION Default A function linked to the RESET button on the remote control Allows you to reset the previous adjustment settings of all ON Screen Menu Operations to the factory default value NOTE Be sure you wish to execute this function 1 Use the CURSOR lt buttons to highlight SYSTEM Press the OK button 2 Use the CURSOR A UP and Y Down buttons to highlight Default Press the OK button 3 Use the CURSOR A UP and Y Down buttons to select Reset or Cancel Press the OK button SYSTEM
37. nel Coverage Low band 54 00to 144 00MHz Mid band 145 00 to 424 00MHz High band 425 00 to 861 25MHz Sound Output 10W 10W Dimensions Including Stand W 1023 x H 697 x D 250 mm Net Weight Including Stand 16 3 kg Operating Environment Operating Temperature 5 C to 35 C Operating Humidity 0 to 90 Storage Temperature 0 C to 40 C Storage Humidity 0 to 90 non condensing Specifications are subject to change without notice The On Screen Menu and figures in this manual may differ slightly from the product Input terminals 28 Output terminals CONFIGURATIONS OF VGA TERMINALS VGA IN D SUB TERMINAL Terminal D SUB15 PIN Connect video output terminal of LCD TV to this terminal with a VGA Cable not supplied When connecting Macintosh computer the MAC Adapter not supplied is required Pin Configuration 1 Red Input 9 5V 2 Green Input 10 NC 3 Blue Input 11 Sense 0 O6 6000 4 Reserved 12 DDC_SDA oo 5 Reserved 13 Horiz sync 00000 6 GND 14 Vert sync T GND 15 DDC SCL 8 GND SIGNAL MODES This LCD TV can correspond to the signals below After connecting with the computer the TV can automatically recognize the signal from the connected PC computer HDMI PC SIGNAL MODE COLUMN recommended SYSTEM MODE Resolution V Freq Hz H Freq KHz PIXELS CLOCK MHz 640x480 59 94 31 47 25 18 800x600
38. osite video Input VIDEO1 or VIDEO2 PAGE 10 Standard composite video and standard audio inputs and for use with video devices with analog audio and composite video output Connect digital video equipment to the Video Yellow jack and matching Audio White L and Red R jacks 8 Component Video Input VIDEO3 YPbPr PAGE 10 Connect digital video equipment to the Video Green Y Blue Pb Red Pr jacks and matching Audio White L and Red R jacks These jacks will automatically detect the type of signal being received 4 Digital Audio Output Coaxial PAGE 12 Use a Phono Type Coaxial Digital Audio Out Cable to connect Digital Audio Output to an advanced stereo home theater system equipped with Dolby Digital 5 Analog Digital Antenna Input PAGE 7 Connect an RF antenna or Analog Cable system to this jack BACK SIDE PANEL 8 T PC INPUT PC AUDIO INPUT HDMI INPUT2 HDMI Input INPUT1 INPUT2 or INPUT3 PAGE 12 A digital AV interface that accepts uncompressed video signals for the best picture This HDMI input supports HDCP copy protection allowing transmission of copy protected digital contents PC AUDIO INPUT PAGE 12 20 This terminal is not only use for PC audio input but also can share with HDMI audio input for DVI signal connecting 8 PC INPUT RGB connector of 15 pin D SUB PAGE 13 Connect computer to this terminal Audio is separated from another Stereo Mini Jack PC AUDIO
39. ress the MENU button and then use CURSOR 4 gt buttons to highlight PARENT Press the OK button 2 Enter your password If the password is correct it will automatically return to the PARENT menu If the password is wrong you can enter the password again or press the MENU button to return to the PARENT menu 3 Use the CURSOR A UP and Y Down buttons to highlight TV Rating for TV Rating Press the OK button 4 Use the CURSOR UP Y Down and 4 gt buttons to select the setting you want to adjust and press the OK button A white mark will appear in the squared region MPAA OPERATION MPAA Decides which kind of classified movie rating signal can be viewed 1 Press the MENU button and then use the CURSOR lt buttons to highlight PARENT Press the OK button 2 Enter your password If the password is correct it will automatically return to the PARENT menu If the password is wrong you can enter the password again or press MENU button to return to the PARENT menu 3 Use the CURSOR A UP and Y Down buttons to highlight MPAA for movie Rating Press the OK button Use the CURSOR A UP and Y Down buttons to select the setting you want to adjust and press the OK button A white mark will appear in the squared region 17 18 ON SCREEN MENU OPERATION CONTINUED CANADIAN US ENGLISH OPERATION 1 Press the MENU button and then use the CURSOR lt gt buttons to highlight PARENT Press the O
40. roll over the screen only in Zoom mode x2 x4 Open Thumbnail 2 Use the EXIT button to exit this function SETTINGS for Slideshow function OPERATION 1 Use the CURSOR A UP and Y Down buttons to highlight Settings Press the OK button 5 Use the EXIT button to exit this function 2 Use the CURSOR A UP and Y Down buttons to highlight Slideshow Interval Use the CURSOR lt buttons to select 3sec 1 Use the CURSOR A UP and Y Down buttons to 5sec or 10sec select Thumbnail Press the OK button 8 MULTI VIEW Thumbnail Use the CURSOR A UP and Y Down buttons to highlight Slideshow Effect Use the CURSOR lt buttons to select Off Wipe Right Wipe Down Comb Side Comb UpDown Checker Mosaic Fade Blind Left Blind Down Box In and Box Out 4 Use the CURSOR A UP and Y Down buttons to highlight Slideshow Repeat Use the CURSOR lt gt buttons to select On or Off NOTES The operation bar of JPEG viewer OSD will disappear within three seconds Press the INFO button to display the operation bar again Use the CURSOR 4 buttons to view Next or Previous eL I TS Use the INFO button to close OSD information a 1 mem 2 ES 4 diu et 2 Press the OK button then use the CURSOR lt gt A UP and Y Down buttons to select JPEG file Press the OK button b ag LAE OK 3 If the JPEG file more than 15 files Use the CURSOR lt gt A UP
41. s information with respect to proper grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding conductors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrodes 16 An outside antenna system should not be located in the NOORWNS co 2 vicinity of overhead power lines or other electrical light power circuits or where it can fall into such power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal EXAMPLE OF ANTENNA GROUNDING ACCORDING TO NATIONAL ELECTRICAL CODE ANSI NFPA 70 ANTENNA LEAD IN WIRE GRO ND CLAMP d ie ANTENNA DISCHARGE UNIT NEC SECTION 810 20 GROUNDING CONDUCTORS No NEC SECTION 810 21 A POWER SERVICE GROUNDING GROUND CLAMPS AH ELECTRODE SYSTEM NEC NATIONAL ELECTRICAL CODE MES ATA PARTH Note to CATV system installer This reminder is provided to call the CATV system installer s attention to Article 820 40 of the NEC that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical 17 Wall or Ceiling Mounting The product should be mounted to a wall or ceiling only as recommended
42. to exit from the menu 1 Button Press numeric button then press this button to select TV digital channel GUIDE Button Press to show window with the guide information displayed on your HDTV screen digital channel only 2 INFO Button Press to display Channel Banner information Digital Banner may contain Channel Number CC State Channel Title Video Resolution Video Ratio Signal Strength Digital Sound information amp Program Rating Analog Banner may contain Channel Number CC State Channel Title Video Resolution Analog Sound information amp Program Rating 3 RECALL Button Press to switch to last channel or input selected Channel Up Down CH Buttons Press to 0 000 OOo OOOO Switch to last next active channel 45 RESET Button Press this button to display RESET menu If you execute RESET function the TV will clear all customized settings NOTE The Channel Scan Memory database will be reset to default all analog channel enabled You will need to execute Channel Scan after RESET SLEEP Button Press this button to switch Off Timer between Off 30 min 60 min 90 min 120 min 150 min and 180 min options NOTE The Off Timer will be canceled when the TV is turned off or when a power failure occurs 17 CAPTION Button Press this button to switch CC mode between Off CC Display and Muted On options Digital Captions can be changed using the men
43. trength e Install outdoor Digital antenna e Channel may be removed from Selec Channel List to add memory channels or start channel scan in Cannot select or scan Check antenna connections CHANNEL mode some channels No digital signal being Turn antenna install signal booster broadcasted Weak Signal Check CHANNEL menu Signal e Set Signal Source to Cable Set No Cable channels Source item should set to Cable Signal Type to All and execute above number 13 Channel Scan to search for Cable channels in CHANNEL menu Remote Control will Check batteries Replace batteries not operate TV Check if the TV is Plugged in e Aim remote control at front of TV Cabinet makes e This is a normal condition during d warm up and cool down of the POPRING SOUn plastic cabinet parts Check the external equipment Press the INPUT button on the connections remote control MN No USB Media message appears on screen e Check the external equipment settings SPECIFICATIONS Maximum Visible Range H 930 24 x V 523 26 mm 42 02 inches diagonal Refresh Rate 120 Hz Picture Resolution Full HD 1920X1080 Viewing Angle Horizontal 178 amp Vertical 178 Panel tentative Brightness 450 Typical cd m Panel tentative Contrast Ratio 4000 1 Typical Panel tentative Voltage 120V AC 60Hz AC Power Consumption average 178 Watts Color System NTSC3 58 Sound System M Chan
44. u settings 10 GETTING STARTED CONNECTIONS 3 Analog Signal Connections VIDEO1 or VIDEO2 optional Connect an analog device such as an Analog Cable Box Satellite Receiver or VCR Composite connectors are included on your HDTV to provide continued compatibility with older analog devices such as a VCR The S Video connector will provide the best analog resolution If you have an S Video connector on your old analog equipment you should use it instead of the standard video connector Cables are not supplied 1 Connect an AV cable to the VIDEO1 or VIDEO2 jack on the HDTV and to your analog AV equipment as shown Match the connector colors to jack colors 2 Press the INPUT button to step through the signal inputs to select Video1 or Video2 PCINPUT PCAUDIO INPUT ANALOG DEVICE 4 Component Signal Connections VIDEO3 YPbPr Connect Digital devices such as a HD Cable Box HD Satellite Receiver DVD Player and Game System The Component jacks on this HDTV will accept HDTV EDTV and SDTV video signals making Component a great choice when connecting your compatible external devices 1 Connect a COMPONENT cable to a set of Green Blue and Red video jacks VIDEO3 YPbPr on the HDTV and to your digital device as shown Cable is not supplied 2 Connect an AUDIO cable to the matching set of White and Red audio jacks as shown Cable is not supplied 3
45. ug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and at the point where they exit from the apparatus 11 Only use the attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart appliance combination to avoid injury from tip over 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the appliance has been damaged in any way such as when a power supply cord or plug is damaged liquid has been spilled or objects have fallen into apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 15 If an outside antenna is connected to the television equipment be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges In the U S Selection 810 21 of the National Electrical Code provide
46. under the PICTURE mode recovered from the factory default value 1 2 3 Use the CURSOR lt gt buttons to highlight PICTURE Press the OK button Use the CURSOR A UP and Y Down buttons to highlight Reset Picture Press the OK button Use the CURSOR A UP and Y Down buttons to select Reset or Cancel Press the OK button NOTE Press the MENU button to return to the PICTURE mode menu AUDIO Sound Mode Treble Bass Center Balance Bass Boost Low Surround Off HDMI Audio Reset Audio Auto EBE3Move amp AGS3Enter Return GWExit SOUND MODE OPERATION 1 2 3 4 Press the MENU button on the remote control to display the Main menu Use the CURSOR lt buttons to highlight AUDIO Press the OK button Use the CURSOR A UP and Y Down buttons to select Sound Mode Press the OK button Use the CURSOR 4 gt button to adjust the audio setting Off Rock Pop Jazz Vocal User 19 20 NOTES User mode Sound Equalizer will allow to adjust frequency response from 100Hz to 10kHz by user Use the CURSOR A UP and Y Down buttons to select frequency Use the to CURSOR lt buttons to adjust the frequency setting ADJUSTING THE AUDIO LEVELS TREBLE BASS BALANCE OPERATION 1 Press the MENU button on the remote control to display the Main menu 2 Use the CURSOR lt buttons to highlight AUDIO Press the OK button 3 Use the CURSOR A UP and Y Down buttons to select

Sanyo DP42410 User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents