Sanus Systems NFCD User's Manual
Contents
1. SANUS SYSTEMS THE UNION OF FORM AND FUNCTION Assembly Instructions for Model NFCD Thank you for choosing a Sanus Systems Natural Media Tower The Model NFCD is designed to keep your collection clean and organized by storing up to 430 CDs or 230 DVDs all in one convenient location If you do not understand these directions please contact Sanus at 800 359 5520 or www sanus com Check carefully to make sure that there are no missing or defective parts Our customer service representatives can quickly assist you with assembly questions and missing or damaged parts Replacement parts for products purchased through authorized dealers will be shipped directly to you Never use defective parts Improper assembly may cause damage or serious injury Do not use this product for any purpose that is not explicitly specified by Sanus Systems Sanus Systems can not be liable for damage or injury caused by incorrect assembly or incorrect use Please call Sanus Systems before returning products to the point of purchase Required Tools Rubber mallet or hammer screwdrivers phillips amp regular Supplied Parts List Not to Scale NFCD Top A Qty 1 NFCD Base B Qty 1 sb NFCD Foot C Qty 4 Glass Shelves F Qty 14 Center Support D Side Panels E Qty 1 Qty 2 sanus systems Sanus Name Plate G Qty 1 Sanus Systems 2221 Hw2. ass Shelf requires four shelf Pins Place the Glass Shelves F in the NFCD Media Tower Diagram 7 Step 8 Attach Name Plate Attach the Sanus Name Plate G In the desired location Diagram 8 al Sanus Systems 2221 Hwy 36 West Saint Paul MN 55113 02 28 06 100028 Customer Service 800 359 5520 See complementary Sanus products at www sanus com
3. nter Support F The top of each Side Panel is smooth and the bottom has a notch routed in the inside edge Attach a Side Panel to each side of the Center Support and using a phillips screwdriver rotate each Cam H clockwise until tight See Detail B Diagram 4 E Gs Detail B Step 5 Attaching NFCD Top Panel Stand the unit up so that the notched bottom of each Side Panel is facing down and the smooth top edge is facing up Tap a Plastic Dowel Pin J into the holes in the top edge of each Side Panel E then align the holes of the NFCD Top A with the Dowel Pins and the slot across the NFCD Top with the Center Support D Firmly press the NFCD Top onto the Dowel Pins and Side Panels until it is firmly seated NOTE Once the NFCD Top is attached it may not be removed without causing damage Diagram 5 Step 6 Attaching NFCD Base Assembly Turn the assembly over so that the Top is resting on a towel or clean carpet Gently fit the NFCD Base B into the routed notches in each Side Panel E Rotate the NFCD Base to expose the screw holes and using the phillips screwdriver secure with four Wood Screws L Diagram 6 Step 7 Installing Glass Shelves Stand the NFCD Media Tower upright Place the Shelf Pins M into holes in the Side Panels where you want the Glass Shelves F to be located Each Gl
4. y 36 West Saint Paul MN 55113 02 28 06 100028 Customer Service 800 359 5520 See complementary Sanus products at www sanus com Supplied Hardware Full Size AAU MMES Cam H Cam Pin Plastic Dowel J Qty 4 Qty 4 Qty 4 TL ai CW Machine Screw K Wood Screw L Shelf Pin M Qty 4 Qty 4 Qty 56 Step 1 Attach Feet to NFCD Base Insert a Machine Screw K into each Foot C then using the regular screwdriver attach the Feet to the NFCD Base B Diagram 1 Step 2 Insert Cam Pins into Side Panels There are two holes that are centered on each side of the Side Panels E and 12 304 3 mm from each end Using the phillips screwdriver screw Cam Pins I into the two holes of each Side Panel taking care not to over tighten the Cam Pins Diagram 2 aye Step 3 Insert Cam into Center Support Place a Cam H into each of the four holes in the Center Support D NOTE Each Cam has an arrow on it Using a phillips screwdriver align each Cam so the arrow is pointing toward the small hole on the edge of the Center Support See Detail A Diagram 3 Cam H Small L Hole qe i Cam H Small sae Detail A Step 4 Secure Side Panels to Center Support The Cam Pins I installed in each Side Panel E line up with the small holes in the edge of the Ce
Download Pdf Manuals
Related Search