Samsung MAX-VB450 User's Manual
Contents
1. This is a player that enables the playback of audio CD CD R CD RW OR and MP3 CD and does not possess the function that saves MP3 files Do not use CDs of irregular shapes like heart or octagon shapes The performance of the player may be degraded gt gt At least more than one CD should be inserted for playbacks 1 Press the Standby On button to switch on the power 2 Press the VCD CD KI of the main unit to select the CD function 3 insert more than one CD or a MP3 CD 4 Press the VCD CD Pl button of the main unit or the KI button of the remote control gt If there is more than one CD or an MP3 CD inserted replays are then processed in order Your CD Player will take a few moments to scan through all the tracks recorded on a particular MP3 CD The English name of the song may be indicated on the display only if directly downloaded from the PC or if the purchased MP3 CD is sorted according to titles directory Other languages besides English may not be indicated The English name of the track may not be indicated depending on the characteristics of the MP3 CD 5 Adjust the volume according to needs with the following procedures Turn the Volume control of the main unit or Press the VOL or button of the remote control 6 If it is desired to stop while2. a cocco Ge EG Er ET Al Sleep Timer On Off Timer Clock CD Repeat Program Enter a amp S V WhatisMP3 ooo i i Demo Dimmer 5 MP3 means MPEG1 Layer 3 the global standard for audio signal compression technology It uses digital compression technol ogy to compress original sound data by up to 12 times without sound quality degradation File Compatibility The unit will playback files created in format Mpeg1 Layer3 with mp3 as their extension Files created in MP2 format Mpeg1 Layer2 with mp2 as their extension can also be played back How many MP3 files can a CD R or CD RW disc record The maximum capacity of one CD R or CD RW disc is 680MB Normally one MP3 file has a capacity of 4MB therefore approximately 170 files can be recorded on a single disc Regarding the playback of CD R RW In the case of an original CD R Recordable recorded in audio CD format CD RW Rewritable and editing by the user playback is processed on the respective completed status The player may not be played back according to the characteristics of the CD or recorded sta tus The CD RW is comparably less reflexive than CD which causes more time delay to read 12 MP3 CD Playback HOW TO PLAYBACK MP3 CD directly After inserting MP3 CD in the Set Press the select but ton or Number button after Reading 2 You can see the i
3. V So 10 Your system is equipped with a clock which allows you to turn your system on and off automatically You should set the clock When you purchase the mini compact system After a power failure After unplugging the unit W Remember to reset the time when the clock changes from winter to summer time and vice verse For each step you have a few seconds to set the required options If you exceed this time you must start again Switch the system on by pressing Standby on Press Timer Clock twice Result CLOCK is displayed Press Enter Result The hour flashes P oc N sch To Press the Increase the hours ppt Decrease the hours Uoc L When the correct hour is displayed press Enter Result The minutes flash 6 To Press the Increase the minutes pi Decrease the minutes kd 7 When the correct time is displayed press Enter Result The clock starts and is displayed even when the system is in standby mode gt You can display the time even when you are using another function by pressing Timer Clock once S CD Repeat Program e Vo o f band VS Demo Dimmer Mono ST Stop Loading and Changing Compact To replay the CDMP3 CD The CD disc changer can contain up to three 12 cm or 8 cm compact discs without using an adapter W Never force the compact disc carrousel whe
4. Volume Equalizer Example You can watch a film and take advantage of stereo sound provided that the original sound track is in stereo as if you were in a cinema LU HU UU Al Sleep Timer On Off Timer Clock CD Repeat Program d Phones MIC VOL MIC TN The loudspeaker connector terminals are located on the rear of the system 1 Press and hold the clamp of the speaker terminal on the rear of the unit Insert the end of the speaker cord into the terminal Match the polarity colors Red to red and black to black 3 Release the finger from the clamp Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the unit Directions in Installing Speaker Installation in a place near heating apparatus under direct lay of light or with high humidity may cause performance degradation of the speaker Do not install on the wall or on a high place of pole or other unstable place to prevent any safety accident caused by falling of the speaker Do not take the speaker apart from TV or computer monitor The speaker near the TV or computer monitor may influence the quality of the screen display Connecting the AM MW LW Aerial The AM aerial for long and medium waves can be Placed on a stable surface Fixed to the wall you must first rem
5. EQ Preset Pop Compact Disc Compartment VCD CD Open Close Disc Change Disc Selection buttons Remote Control 15 16 17 Gn GT AlSleep Shuffle Return Time Search D Sound Slow Key Control El Standby On Digit Buttons Direction Buttons FM Mono Stereo VCD Zoom 10 0 Track Previous VCD CD Stop CD Repeat Radio Station Search Volume Decrease Deck 1 2 TAPE Rewind TAPE Fast Forward Al Sleep VCD CD Shuffle Play MP3 CD Random Play VCD Sound VCD Slow Play Key Control b 18 19 20 21 22 23 24 25 26 27 28 29 30 S BASS 32 33 Key Control Return Time Search Last Memory TAPE Stop TAPE Play Tuner Band Tuning Mode Volume Increase Disc Number Skip Disc Play Pause Track Next Disc View Sound Mode Timer On Off Mute Rear Panel View SPEAKERS IMPEDANCE 60 Mg e 0 O 1 FM Aerial Connector Terminal 2 AM Aerial Connector Terminals AUX Input Loudspeaker Connector Terminals Voltage Selector option SW Aerial Connector Terminal option Audio DISC Output gt Video DISC Output Tour Inserting Remote Control Batteries To take full advantage of your new mini compact system follow these installation instructions before connecting the unit Install the system on a flat stable
6. 0779 THREE CD CHANGER VIDEO CD MINI COMPACT SYSTEM MP3 CD CD R RW PLAYBACK MAX VB450 Safety Warnings CLASS 1 LASER PRODUCT CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1 This Compact Disc player is classified as a CLASS 1 LASER product Use of controls adjustments or performance of CAUTION AN procedures other than those specified herein may result DO NOT OPEN DEE in hazardous radiation exposure CAUTION TO REDUCE THE RISK OF ELECTRIC ap ies och CAUTION INVISIBLE LASER RADIATION WHEN OPEN REFER SERVICING TO QUALIFIED AND INTERLOCKS DEFEATED AVOID SERVICE PERSONNEL EXPOSURE TO BEAM This symbol indicates that dangerous voltage which can cause electric shock is present inside this unit This symbol alerts you to important operating and maintenance instructions accompanying the unit gt gt WARNING To reduce the risk of fire or electric shock do not expose this appliance to rain or moisture CAUTION TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT FULLY INSERT Thank you for buying this SAMSUNG mini compact system Contents Please take time to read these instructions They will allow you to operate your system with ease and take full advantage ER of its features SAFETY WARNINGS isti INSTALLING YOUR MINI COMPACT SYSTEM Bi Front Panel VieWze z amun c Me
7. Turn on the Standby On switch and set the VCD mode Press the Open Close button on the unit to open the CD tray Result OPEN is displayed and CD tray slides open Load a video CD S with the label facing upwards in the tray Press the Open Close A button again to close the CD tray oF G N To playback In version 1 1 press the ru button for direct access to the film as there is no menu on screen In version 2 0 load a video CD Video CD2 0 and MENU ON are displayed on the TV screen Press the ru button and the menu is displayed on the TV screen Select a number from the menu using Digits button on the remote control and press the VCD CD button gt To return to the previous menu press the Return button on the remote control or the Enter button on the front panel When playing a video CD S version 2 0 reading time on the display may take longer depending on the disc s contents 6 Press u button on the remote control to receive a still picture Result Pause is displayed a still picture appears and the sound is muted 7 To return to normal playback press VCD CD button 8 Press the Stop button to stop playback gt gt Please make sure that the VIDEO CD S to be played is not flawed optically as this may cause a distorted sound or the unit to malfunction Open Close Disc 2 Disc 3 Disc Change oO 5 S g SS ccococ2t S
8. AI Slean Timer EON Timer Clock CD Repeat Program E 9 SN SN Ba NS Si S Se e 3i AP SE Phones MIC VOL Geck J 16 You can find certain passage faster during playback This function is possible in CD or VCD Ver 1 1 or Ver 2 0 menu off mode 1 To Pressandholddown Scan forwards gt Scan backwards 4 2 Release the Skip Search buttons when the desired passage has been found gt gt In the video CD version 1 1 where the disc s contents are over 15 minutes long you can scan up or down by intervals of five minutes 3 To Scan forwards by 5 minute intervals Scan backwards by 5 minute intervals Result The picture is still and the disc s contents are forwarded or reversed by 5 minute intervals Playback then resumes from this new position gt In the SKIP SEARCH or SCAN mode the sound can only be partially heard and the picture scenes will change sporadically until the required passage has been found da Time Search Function This function is available only during the playback of a CD VCD Please use this function for reproducing a desired track in a certain time of playback 1 Press the Time Search button 2 Set a desired time by pressing the Digit buttons 3 Press the Play Pll button AlSkep Shuffle Return
9. Coco es amp van When adjusting play speed Sound Select Function Turn on the TV and set video mode Press the Slow button on the remote controller when the play function is on Voices do not come out when the Slow button is pressed Slow playing is 1 2 1 4 1 8 the normal playing speed To return to normal operation Press the VCD CD PII button gt gt When the slow mode or frame mode is selected a disc will only forward operation Al Sleep Timer On Off Timer Clock CD Repeat SE __ Phones MIC VOL Deck1 2 m VCD CD RS GID AlSleep Shuffle Return Time Search Sound Slow Key Control NTSC PAL Selection Method According to a DISC or TV Press the REC Pause button on the front panel Set the system to standby power off mode press the REC Pause button on the front panel Result Each time the REC Pause button is pressed the following appears in the display m NTSC SCH N Demo Dimmer Counter REC Deck1 2 Reset Pause CD 9 synchro With this function you can playback video CD s that provide 2 chan nel tone bilingual in the original language Similarly with karaoke video CD s you can select between the channel for music without vocals for sing along purpose or the channel complete with music and vocals During playback press the Sound button on the remote control Result Each time the Sound bu
10. Disc 1 2 3 button 5 Select the required track by pressing the Ita and ppi button Press 141 to move back through the tracks Press pp to move forward through the tracks 6 Press Program to confirm your selection Result The selection is stored and is displayed 7 To select other tracks repeat Steps 4 to 6 8 Press VCD CD Pl to listen to the track selection in the order pro grammed To Press the 144 and pp Listen to the current track again Press red once Listen to the previous track Press k d twice Listen to the next track eec Press PRI once Skip forwards or backwalds o one The appropriate number of or more tracks pressing the 164 and ppi 10 To cancel the selection press B Once if the compact disc player is stopped Result PRGM is no longer displayed gt gt If you open the compartment the selection is cancelled If you select the number of a disc which is not loaded or a track which does not exist on the CD the selection skips to the next programmed track ee ee 6 AI Sleep Timer On Off Timer Clock fl A7 Phones MIC VOL Decku2 Counter Checking or Changing Programmed Tracks You can check or change your selection of tracks at any time 1 Press M once if you have started listening to the selection 2 Press Program Result The following indications
11. are A Te C Check 01 Program No DI Disc No Track No on the disc gt f you have already programmed 30 tracks C is displayed instead of P when you press Program Press Program again Result The first track selected is displayed together with the letter C Change Press Program one or more times until the track to be changed is displayed If necessary press the corresponding Disc 1 2 3 button to change discs 6 Press 44 and ppt to select a different track 7 Press Program to confirm your change Press VCD CD ru to start listening to the selection Result The first track selected is played gt When selecting the tracks of numbers larger than 3 digit figures figures from the number 100 please use the Digit buttons gt S3 Hd o dH Mes KE Timer On Ott am CD Repeat Prograr Enter O Q SB w l standbyron 00000 Phones Mono ST 410 0 Disc View Sound Mode vo C C2 CD Repeat Disc Skip 15 In order to playback video VIDEO CD S make sure that your unit is connected to your TV set This unit is designed for playback of video CD S version 1 1 and 2 0 Only with version 2 0 is it possible to call up the on screen menu function This unit will not play back any other video VIDEO CD S other than 1 1 and 2 0 versions
12. surface Never place this unit on carpeting Never place this unit in an outdoor area Maintain an open space of approximately 6 inches 15 cm on the sides and rear of the system for ventilation purposes Make sure that you have enough room to open the compact disc com partment easily Place the loudspeakers at a reasonable distance on either side of the system to ensure good stereo sound Direct the loudspeakers towards the listening area For optimum performance make sure that both speakers are placed at an equal distance above the floor Connecting your System to the Power Supp The main lead must be plugged into an appropriate socket W Before plugging your system into a main socket you must check the volt age Check the position of the voltage selector on the rear of the system OPTIONAL 2 Plug the main lead marked AC Cord on the rear of the system into an appropriate socket 3 Press the Standby On button to switch your mini compact system on ess ess ess ess ass ess ess ess ess O ES D EX A 2 G d eas Insert or replace remote control batteries when you Purchase the mini compact system Find that the remote control is no longer operating correctly When replacing the batteries use a new set of batteries and never mix alkaline and manganese batteries 1 Place your thumb on the position marked on the battery compart
13. to light ning could damage the unit Remove the batteries from the remote control if not used for any extended period Leaking batteries can cause serious damage to the remote control When using headphones take care not to listen at excessive volumes Extended use of headphones at high volumes will lead to hearing damage Do not place heavy items on the main lead Main cable damage can lead to damage of the equipment fire hazard and can cause electric shock Do not remove any equipment panels The inside of the unit contains live components which cause electric shock Cleaning Your Mini Compact System To obtain the best possible results from your mini compact system you must clean the following elements regularly The outer casing The compact disc player The cassette players heads rollers and drive capstans Always unplug the system from the wall outlet Before cleaning it If you are not going to be using it for a long time Outer Casing Clean the outer casing regularly using a soft cloth and a light detergent Do not use abrasive powders liquids or aerosol cleaners Never let any liquids get into the system Compact Disc Player 1 Before playing a compact disc clean it with a special CD cleaning agent Do not use the same cleaning agents as for vinyl LP records Carefully wipe the disc from the centre outward 2 Regularly clean the player with a special cleaning disc a
14. 4 PPI buttons Press Enter d Select a preset station by pressing the 4 IER buttons o VCD CD compact disc a Load one or more compact discs b Select the reguired disc Press Enter to confirm the timer Press Standby On to set the system to standby mode Result O is displayed to the bottom left of the time indicating that the timer has been set The system will switch on and off automati cally at the required times gt It the timer switch on and off times are identical the word ERROR is displayed JS E E C ee Al Sleep Timer On Off Timer Clock CD Repeat Program Enter o o Demo Dimmer Mono ST Phones MIC VOL Cancelling the Timer After having set the timer it will start automatically as shown by the TIMER indication on the display If you no longer wish to use the timer you must cancel it gt You can stop the timer at any time system on or in standby mode To Press Timer On Off Cancel the timer vem Once Result Gis no longer displayed Restart the timer s Twice Result C is displayed again Mono ST 410 0 Disc View Sound Mode Ww lt a VCD as Previous PP CD Repeat Disc Skip You can turn the sound off temporarily on your system Example You wish to answer a telephone call 1 Press Mute 2 To switch the sound back on at the same volume as before press Mute agai
15. Return Time Search Sound Key Control 14 Repeating One or All Tracks on the Compact Discs You can repeat indefinitely A specific track on a compact disc All tracks on the compact disc selected All discs loaded in the carrousel 1 To repeat Press CD Repeat on the Front Panel one or more times until The current track indefinitely REPEAT 1 is displayed The selected disc REPEAT 1 CD is displayed All discs loaded rr REPEAT ALL CD is displayed 2 When you wish to stop the Repeat function press CD Repeat until ALL CD or 1 CD is displayed or press El El E Ed EG Al Sleep Timer On Off Timer Clock CD Program Enter 5 S oo Demo Dimmer Mono ST Programming the Order of Playback You can decide The order in which you listen to the tracks on the discs loaded Which tracks you do not wish to listen to A maximum of up to 30 order of tracks desired to listen may be programmed gt 9 Before selecting the track the VCD player should be stopped This function may be used simultaneously with the CD Repeat function 1 If the CD function is selected stop the player by pressing BI Load the selected CDs 3 Press Program Result The following indications are displayed 01 Programme No DI Disc No Track No on the disc 4 If necessary select the disc containing the required track by pressing the corresponding
16. S is displayed and SBS ON is displayed for a few seconds To cancel this function press SBS button again 24 Standby On DemolDimmer Mono ST Phones MIC VOL MIC O The microphone enables the user to mix in his or her vocals to sing along with the music Preparation Plug the microphone with a 6 3mm mic jack into microphone terminal 1 Turn the MIC Volume knob to adjust the mic volume PS R Z Al Sleep Timer On Off Timer Clock CD Repeat Program Demo Dimmer Mono ST _ Phones MIC VOL MIC jo Safety Precautions The following diagrams illustrate the precautions to be taken when using or moving your mini compact system Ambient operating conditions Ambient temperature 5 35 Humidity 10 7596 Do not expose the unit to direct sun radiation or other heat sources This could lead to overheating and malfunction of the unit Do not place potted plants or vases on top of the unit Moisture entering the unit could lead to dangerous electric shock and can cause equipment damage In such events immediately disconnect the main plug from the socket During thunderstorms disconnect the main plug from the socket Main voltage peaks due
17. ant to select a track as the previous one 1 Press the Disc View button in the stop state 2 Press Zoom button once more in the state of double sized zoom Result TRACK VIEW menu is displayed on the screen Result The picture being reproduced is enlarged four times as large The screen is split into 9 with each screen picture being as the initial one reproduced for 4 seconds Press NEXT button to see the rest tracks 3 Press Zoom button in the state of four times sized zoom Press PREV 4 button to see the previous tracks Result The picture will return to the initial size 2 Select a track by pressing the Digits buttons ids he VCD CD but During operating the zoom function if you want to move the 3 Press the Pil button picture upward downward leftward rightward please press the Result The picture that you selected is displayed in full screen respective Digits button 2 4 6 8 4 When you wish to stop the DISC VIEW function press the Bill button When using more than 10 tracks Press the Digits and 10 0 button select the desired track number Reference page 13 Press NEXT button to see the next track Press PREV 14 button to see the previous track Mono ST 10 0 Disc View Sound Mode Zoom VCD CD SR Previous Next CD Repeat Disc Skip When you want to select an INDEX This function is convenient to search a desired scene as it displays a track repro
18. assette where the tab has been broken simply cover the opening with adhesive tape When you have finished playing a cassette always put it back in its case Store your cassettes in a clean place out of direct sunlight where they will not be exposed to high temperatures Avoid using 120 minute cassettes as they place unnecessary strain on the tape mechanism 26 Before Contacting the After Sales Service It always takes a little time to become familiar with a new appliance If you have any of the problems listed below try the solutions given They may save you the time and inconvenience of an unnecessary service call Problem Checks Explanation The system does not work The main lead is not correctly plugged into a wall socket or the wall socket is not switched on The remote control batteries need replacing or the polarity has not been respected The Standby On button has not been pressed There is no sound The volume has been completely turned down The correct function TUNER CD TAPE AUX has not been selected You have connected a set of earphones The loudspeaker wires have been disconnected The Mute button has been pressed gt Dm zm The Timer does not work The timer has been stopped by pressing Timer On Off In case it does not work even the Press the SBS button for 5 seconds in action is taken as above power OFF standby then it is returned the ori
19. duced by time Last Memory Function 1 Reproduce the pictures by pressing KU button 2 Press the Disc View button When CD playback is selected again after your CD player has Result INDEX VIEW menu is displayed on the screen been stopped or turned off this function allows playback from the The screen is split into 9 with each screen picture being start of the track that you last listened to reproduced for 4 seconds 3 Reproduce the pictures by pressing a desired Digits button Result The one of nine picture is displayed in full screen mm C2 C C aa Mono ST 410 0 Disc V hund Mode le AlSleep Shuffle Return Time Search Previous Sound Slow Key Control 18 m Searching for and Storing the Radio Stations You can store up to 15 FM stations 15 AM stations or 8MW 7LW Station 15FM stations 5 MW stations 5 SW1 stations 5 SW2 stations 1 Switch the system on by pressing Standby on 2 Select the TUNER function by pressing TUNER 3 Select the required frequency band by pressing TUNER Band again on the front panel or TUNER Band on the remote control Result The appropriate indication is displayed FM Frequency Modulation AM MW Medium Wave LW Option Long Wave SW1 Option Short Wave SW2 Option Short Wave 4 Tune in to the desired station Manual tuning Press the Tuning Mode button so that the MANUAL indicator
20. erial Connecting to the Equipment Using the Audio Cord Connect the Audio Output Terminals Left Right of the System with the Audio Input Terminals Left Right of the Video Input Cassette Recorder so as to Record VCD Using the Video Cord Connect the Video Output Terminal of the system with the Video Input Terminal of TV Turn on the TV and Select the Video mode by pressing the TV VIDEO SELECT button to the VIDEO Position Please Pay Attention not to Connect the Audio Output Terminals left right of the System with the Audio Input Terminal of TV VIDEO OUT L ANPLIFIER VIDEO INPUT AUDIO INPUT All functions available on the system can be viewed on the display and the display s brightness can be switched between on and off Press the Demo Dimmer button Result All functions available on the system appear on the front panel display gt gt Each of these are explained in detail in this guide Please refer to the relevant section 2 Press the Demo Dimmer button again Result The Dimmer function is selected and the display darkens gt gt Press the Demo Dimmer button once again to brighten the front panel display display brightness control can only be performed while the system power is on _ A Timer Clock cD M Program Enter EY CO S lt Gs 5
21. ginal position RESET The CD function has not been selected The disc has been inserted face down or is either dirty or scratched The compact disc player does not The laser sensor is dirty or dusty start playing The system has not been installed on a flat horizontal surface Condensation has formed in the player leave the system in a warm airy room for at least one hour Dog The mp 3 CD player cannot be Use the PC to confirm if the extension is played mp3 The TAPE function has not been selected The cassette has not been inserted correctly The cassette player has not been closed The tape is either slack or broken The tape does not start playing The volume falls off The audio heads are dirty cassette is not erased correctly The rollers or drive capstans are dirty ere is excessive wow and flutter The tape is worn gom moco o Reception is poor or no radio sta The TUNER function has not been selected ions are received at all The radio frequency has not been correctly selected The aerial has been disconnected or is not facing the right way Turn it until you find the best orientation You are in a building that blocks radio waves you must use an outside aerial 2 If the above guidelines do not allow you to solve the problem take a note of The model and serial numbers normally printed on the rear of the system Your warranty de
22. lights up on the front panel display Press lt lt kk on the main unit to tune in to the desired station manually or Press Tuning or on the remote control to do the same Automatic tuning Press and hold lt lt kk on the main unit for more than 1 second so that the AUTO indicator lights up on the front panel display Press and briefly hold lt lt gt on the main unit to begin automatic tuning or Press and briefly hold Tuning or on the remote control to do the same Use the manual tuning method if the automatic tuning search does not stop at the desired station because the signal is weak For details on the Preset function see the Selecting a Stored Station on page 19 5 Adjust the volume by Turning the Volume knob on the front panel or Pressing the VOL or buttons on the remote control 6 Select the FM stereo or mono mode by pressing Mono ST 7 If you do not want to store the radio station found revert to Step 4 and search for another station Otherwise a Press Program Result The PRGM is displayed for a few seconds b Press Tuning Down and Up to assign a programme number between 1 and 15 C Press Program to store the radio station Result PRGM is no longer displayed and the station is stored 8 To store any other radio frequencies required repeat Steps 3 to 7 gt gt The PROGRAM function can be used to assign a new station to an exi
23. ment cover rear of the remote control and push the cover in the direction of the arrow 2 Insert two AA LR6 or equivalent batteries taking care to respect the polarities on the battery against in the battery compartment on the battery against in the battery compartment 3 Replace the cover by sliding it back until it clicks into position gt gt If you will not be using the remote control for a long time remove the batteries to prevent corrosion V Connecting to an External Source Connecting the Loudspeakers The auxiliary input can be used to take advantage of the sound quality of your mini compact system when listening to other sources Examples A television A video disc player A Hi Fi stereo video cassette recorder To connect the external source the source must have an audio out gt gt put In addition you need an connection cable 1 Set the system to standby mode and disconnect it and the external source from the main 2 Connect the audio cable to the rear of the mini compact system Connect the White ach To the connector marked R right L left gt For optimum sound quality do not invert the right and left channels 3 Plug the system back into the main socket and press Standby On to Switch it on 4 Select the AUX source by pressing AUX Result AUX is displayed 5 Switch the external source on 6 Adjust the volume and balance as required
24. n opening and closing the compartment Never press down or place objects on the carrousel gt Always treat your compact discs with care refer if necessary to the section entitled Precautions When Using Compact Discs on page 26 1 Switch the system on by pressing Standby On 2 Press the Open Close button on the front panel Result The compartment opens 3 Place one or two discs in the front slots of the carrousel with the label on the discs facing upwards Check that the compact disc has been correctly inserted in the holder before closing the compartment 4 If you wish to load a third compact disc press the Disc Change button on the front panel or Disc Skip on the remote control Result The carrousel rotates by 120 5 Close the compartment by pressing the Open Close button again gt If you wish to start playing a disc directly you can also pro ceed as follows To play Press Disc 2 s Disc 2 Disc d oec Disc 3 Result The compartment closes automatically and the disc selected starts playing 6 To change or unload the compact disc changer repeat Steps 2 to 5 W Keep the compartment closed whenever you are not using it to prevent dust from entering gt You can load or unload compact discs when the radio tape or auxiliary source function is selected The function will be automatically entered VCD CD from the other source when you press CD Open Close button
25. n or the Volume buttons Mono ST 10 0 Disc View Sound Mode Gar as an Previous Next GI bl CD Repeat Disc Skip Selecting an Equalizer Preset Your mini compact system is equipped with preset equalizer that allows you to choose the most appropriate balance between treble and bass frequencies according to the type of music you are listening to Press EQ on the front panel until the required option is selected To obtain a Select Normal balance linear e PASS Balance suitable for pop MUSIC e POP Balance suitable for rock music e ROCK Balance suitable for classic music CLASSIC Power Sound Function Your mini compact system is equipped with the function of Power Sound The function of Power Sound amplifies bass and improves high key or bass twice as much for you to appreciate powerful real sound gt To select Power Sound Press Power Sound button on the front panel SOUND is displayed To cancel this function press Power Sound button again and OFF is displayed for a few seconds 23 Setting the System to Switch off Automaticall Connecting Headphones You can connect set of headphones to your mini compact system so that you can listen to music or radio programmers without disturbing other people in the room The earphones must have 3 5 mm jack or an appropriate adapter While listening to compac
26. nformation of Disc on the TV TOTAL 150 PAGE 003 030 144 pi 017 0 02 39 PBAY M DON T FOR M Track No 1 File display 7 tracks on the PAL TV screen every time 5 tracks on the NTSC TV screen every time Select the No of song on the remote control Digits button and you can enjoy the Music Song name HOW TO PLAYBACK MP3 CD on MENU MODE 1 After inserting MP3 CD in the Set Press the DISC VIEW button 2 You can see the following information of Disc on the TV TOTAL 150 PAGE 001 003 000 0 00 00 gt DIRECTORY KBG CDEG123 Directory No Directory name Select the Number of Directory You can see the following Display MP3 TOTAL 150 PAGE 001 004 TR 000 0 00 00 DIRECTORY NAME gt 1 DIRECTORY NAME 51 2 Ai 3 KBG Ai H CDEG123 1 Select the No of song on the remote control Digits button and you can enjoy the Music Searching for a Specific Music You can select the track you wish to listen to either when the compact disc player is stopped or when a disc is playing To start playback at the beginning of the Press the 164 and pp rtt tette ette e Press pp once Current track Press once Previous track e Press kid twice Track of your choice o The appropriate number of pressing the 144 and ppi SS cct Timer On Off Timer Clock CD Repeat Pr
27. ng TAPE Open either cassette deck 1 or 2 by pushing and releasing the deck cover where PUSH EJECT 4 is written Insert the pre recorded cassette with the open edge of the tape facing downward P U NBP Close the deck by pushing on it until it clicks into place Result Depending on the deck selected the 1 or 2 indication is displayed in front of the counter number gt If you insert a cassette in both decks the system selects the deck in which you inserted the second cassette 6 If you have inserted two cassettes press Deck 1 2 on the front panel or directly the Deck 1 2 button on the remote control to select the cassette to be played Result Depending on the deck selected the TAPE 1 or TAPE 2 indication is displayed 7 To listen to Press Side A B TAPE gt once Result The cassette starts playing When the cassette is stopped select one of the following functions 8 as required To Press Rewind the cassette EE dd Fast forward the cassette s DP e amp cocococA Al Sleep Timer On Off Timer Clock CD Repeat Program Demo Dimmer 5 Ge iby On MIC VOL MIC Deck1 2 20 You can record a compact disc on a cassette in two different ways Synchronised recording Direct recording This feature enables you to synchronize the start of the recordi
28. ng with the start of the disc or track of your choice Switch the system on by pressing Standby On Insert a blank cassette in Deck 2 Select the CD function by pressing VCD CD on the front panel Load a compact disc Select the required disc OY Ur RUNI Select the required track and press CD Synchro or press CD Synchro directly to start recording at the beginning of the disc Result REC and CD SYNC are displayed and recording starts 7 To stop Press Recording and playing the compact disc Recording a Compact Disc The direct recording mode enables you to start recording with any track on the compact disc You can only record on cassettes in Deck 2 You do not need to adjust the volume as it has no effect on the recording Switch your system on by pressing Standby On Insert a blank cassette in Deck 2 Select the CD function by pressing VCD CD on the front panel Load the compact disc Select the required disc Select the required track on the compact disc and press gt on the front panel or on the remote control to set the compact disc player to Pause mode Press the REC Pause Result REC is displayed Press the to start playing the track Result The track is recorded on the cassette OLn iU NH When you have finished recording press TAPE ll on the remote control or lil on the front panel to st
29. ogram S A jes MIC VOL MIC Counter t Reset OO When listening to a compact disc you can quickly search for a specif ic music passage on a track gt Itis recommended that you turn the volume down before using this function To search through the tracks Press and hold down Forwards EN for at least one second Backwards Wa for at least one second You can also press and hold down 144 PPI on the front panel to auto search through the tracks Mono ST 10 0 Disc View Sound Mode E VCD CD _ Previous Disc Skip ext el Function to skip through 10 tracks at a time Press the 10 0 button briefly while playing back CD and VCD The track 10 tracks after the current one will then be played back Example If you want to select track 43 during playback of track 15 press the 10 0 button four times and then press the PPI button three times or Digit 3 button once 15 10 20 30 40 41 42 43 10 0 100 100 100 gt gt In selecting a track on MP3 CD digit 0 will be entered if the button of 10 0 is pressed Example If you want to select a track 40 during the playback of a certain track press both buttons of 4 and 10 0 Mono ST 10 0 Disc View Sound Mode VCD CD Previous 13 Shuffle Play Function You can listen to the tracks
30. on a compact disc in a different order each time as the various tracks will be selected automatically in a random sequence 1 Press the Shuffle button Result The SHUFFLE VCD CD or RANDOM MP3 CD indication appears and all the tracks are played in a random order Both the track number and the playing time are displayed If this button is pressed when the CD is being played back or stopped any track recorded in the CD may be selected to playback again The CD plays back without repetitions and in the case of the MP3 CD a track once played back may also be played back again repeatedly 2 When playing tracks in a random order you can Move on to the next track selected at random by pressing ktd Search quickly for a specific point in the current track by pressing 44 gt When you have finished the random playback press or press the Shuffle button again gt The Repeat and CD Synchro function is not supported from the Shuffle playback mode Playback of video CD Version 2 0 When pressing the Shuffle button during the playback the operation will stop When pressing the Shuffle button during the stop the playback will operate with reading the video CD Version 2 0 as a Version 1 1 Al Sleep Timer On Off Timer Clock CD Repeat Program Demo Dimmer Mono ST lt Decki2 lt Ca AlSleep Shuffle
31. op recording C2 CO CO een 3 Sloop Won On Off Timer Clock ham Deda D REC Dubbing Recording a Radio Programme You can record radio programme of your choice You can only record on cassettes in Deck 2 You do not need to adjust the volume as it has no effect on the recording Switch the system on by pressing Standby On Insert a blank cassette in Deck 2 Select the TUNER function by pressing TUNER Q N HB Select the radio station that you wish to record by pressing Tuning AN on the remote control or by press the Tuning Down or Up on the front panel 5 Press REC Pause Result REC is displayed in red and recording starts 6 When you have finished recording press the M on the remote control or on the front panel to stop recording Z C Gep lt Sleep Timer oun P ciock Repeat Program y D SB Timer On Off_Timer Clock_CD Repeat Prog Phones MIC VOL A A w O O O OQ ve er SS Dubbing MIC Ty OO When playing a cassette a counter is displayed to enable you to take note of the counter value at the start of each track and thus start playback at the beginning of the track to which you wish to listen gt The counter is only displayed when a cassette is being
32. ove the base The AM aerial connector terminals are located on the rear of the system and are marked AM To avoid noise interference check that the loudspeaker wires do not run close to the aerial wires Always keep them at least 2 inches b cm away AMANT 1001000 ll l i BS ig Connecting the FM Aerial How to connect a COAXIAL TYPE aerial Connect a 750 antenna to the FM antenna terminal Plug the connector on the FM aerial supplied into the coaxial socket 750 marked FM on the rear of the system Follow the instructions given on Page 19 to tune into a radio sta tion and determine the best position for the aerial If reception is poor you may need to install an outdoor aerial To do so connect an outdoor FM aerial to the FM socket on the rear ofthe system using a 750 coaxial cable not supplied 77 C FM AERIAL supplied g bg TN 75Q COAXIAL CABLE not supplied IES Connecting the SW Aerial option How to connect a WIRE TYPE aerial Spread the SW aerial out and attach the ends to a wall in the position providing the best reception If reception is poor e g distance from transmitter too great walls blocking the radio waves etc install an outdoor a
33. played Before starting to record a cassette for which you wish to take note of the counter values at the beginning of each track reset the counter by pressing Counter Reset T Koll lay stan NE ASN ND oo 2 ome FPO O OO re Counter Deck1 2 Reet Pause Dubbing Ka jl Nd V Copying a Cassette Dubbing You can copy a cassette from Deck 1 to Deck 2 Two options are available gt You do not need to adjust the volume as it has no effect on the recording Take care not to insert the tape to be copied in Deck 2 as it will be erased when you start recording Switch your system on by pressing Standby On Insert a blank cassette in Deck 2 Insert the tape to be copied in Deck 1 gt Press Dubbing To copy a cassette at Normal speed dubbing Result The appropriate indications are displayed and the cassette in Deck 1 is copied to the cassette in Deck 2 5 Press W on the front panel or TAPE M on the remote control when you have finished recording 21 Timer Function The timer enables you to switch the system on or off at spe cific times Example You wish to wake up to music every morning gt e UJ N F 22 If you no longer want the system to be switched on or off auto matically you must cancel the timer Before setting the timer check that the current time is correct For each step yo
34. pying a Cassette Dubbing W Tape Counter OTHER FUNCTIONS W Timer Function E Cancelling the Timer W Mute Function E Selecting an Equalizer Preset W Power Sound Function E Setting the System to Switch off Automatically E Super Bass Sound W Connecting Headphones W Microphone Function RECOMMENDATIONS FOR USE W Safety Precautions E Cleaning Your Mini Compact System E Precautions When Using Compact Discs W Precautions When Using Audio Cassettes W Before Contacting the After Sales Service T NEE sea KJE ied ps paola tt ch bna epa pr litri s sties Symbols gt Hn Press Push Important Note 3 Front Panel View CONOAPWON gt 4 1 2 3 4 5 6 7 8 9 0 1 D Enter Window Display Program CD Repeat Timer Clock AI Sleep Timer On Off Standby On Function Selection buttons Headphone Jack Connector MIC Volume MIC Jack Cassette Deck 1 Demo Dimmer Stop button Mono ST Search Function buttons Deck 1 2 Cassette Deck 2 REC Pause PAL NTSC TAPE Normal Dubbing CD Synchro Recording Counter Reset Skip Function buttons Volume S Bass Power Sound EQ Preset Rock EQ Preset Classic
35. sa W Remote Control W Rear Panel View W Where to Install Your Mini Compact System W Connecting your System to the Power Supply E inserting Remote Control Batteries W Connecting to an External Source W Connecting the Loudspeakers W Connecting the AM MW LW Aerial W Connecting the FM Aerial W Connecting the SW Aerial Option W Connecting the equipment E Demo Dimmer function E Setting the Clock VCD CD PLAYER W Loading and Changing Compact Discs W To replay the CD MP3 CD W Selecting a CD in the Disc changer WMP3 CD Playback W Selecting a Track E Searching for a Specific Music Passage on a CD W Function to skip through 10 tracks at a time E Shuffle Play Function E Repeating One or All Tracks on the Compact Discs W Programming the Order of Playback W Checking or Changing Programmed Tracks W Video CD Player Playback W Search Functions W When adjusting play speed E NTSC PAL Selection Method E Sound Select Function IM KEY CONTROL Function E VCD View Function E ZOOM Function W Last Memory Function A5 OO oo TUNER W Searching for and Storing the Radio Stations E Selecting a Stored Station W Improving Radio Reception Deck IM Listening to a Cassette E CD Synchro Record Feature W Recording a Compact Disc W Recording a Radio Programme W Co
36. sting programme number Selecting a Stored Station You can listen to stored radio station as follows Switch the system on by pressing Standby On Select the TUNER function by pressing TUNER 3 Select the required frequency band by pressing TUNER Band on the remote control or TUNER Band again on the front panel 4 Press 44 kk button on the front panel of the unit or the Tuning Mode button on the remote control until PRESET is displayed 5 Press k d pp to select the desired station or Select the desired station by pressing the station number stored using the Tuning or button on the remote control Result The desired station is now received You can improve the quality of radio reception by Improving Radio Reception Rotating the FM or AM MW aerial Testing the positions of the FM and AM MW aerials before fixing them per manently If reception from a specific FM radio station is poor press Mono ST on the remote control to switch from stereo mode to mono The quality of the sound will be improved Mono ST 10 0 Disc View Sound Mode VCD CD _ Listening to a Cassette CD Synchro Record Feature gt gt Always treat your cassettes with care refer if necessary to the section entitled Precautions When Using Audio Cassettes on page 26 Switch the system on by pressing the Standby On button Select the TAPE function by pressi
37. t disc or cassette you can set the system to switch off automatically Example You wish to go to sleep to music 1 Press Al Sleep Result playback starts and the following indications are displayed 90 MIN 2 gr Prolonged use of headphones at a high volume may damage Press Al Sleep one or more times to indicate how long the system your hearing should continue playing before it switches off Connect the headphones to the Phones jack on the front panel Result The loudspeakers are no longer used to output the sound P SLEEP 90 MIN 60 MIN 45 MIN OFF 15 MIN lt 30 MIN 4 q gt At any time you can IG SEE Check the remaining time by pressing Al Sleep Al Sleep Timer On Off Timer Clock CD Repeat Program Super Bass Sound Change the remaining time by repeating Steps 1 and 2 Press Al Sleep one or more times until AI SLEEP is displayed Result The system will automatically switch off at the end of disc or cassette To cancel SLEEP function press Al Sleep one or more times until OFF is displayed DE SS S Al Sleep Timer On Off Timer Clock CD Repeat Program O SN gt Standby On MIC VOL Your mini compact system has a bass amplification function called S Bass Super Bass Sound This function makes the sound more powerful and real 1 Press the SBS button on the front panel Result S BAS
38. tails A clear description of the problem Then contact your local dealer or SAM SUNG after sales service Technical Specifications SAMSUNG strives to improve its products at all times Both the design specifications and these user instructions are thus subject to change without notice RADIO LW option Usable sensitivity SW option Usable sensitivity AM MW Signal noise ratio Usable sensitivity Total harmonic distortion FM Signal noise ratio Usable sensitivity Total harmonic distortion COMPACT DISC PLAYER Capacity Frequency range Signal noise ratio Distortion Channel separation Disc sizes TAPE DECK Frequency range Signal noise ratio Channel separation Erasing effect eee eee eee CeCe eee ere reer eer ree rer rer rrr crete errr errr rer rrr rrr rrr yy AMPLIFIER Output power 6 Q Channel separation Signal noise ratio GENERAL Dimensions 3 discs 20 Hz 20 KHz 1 dB 90 dB at 1 KHz with filter 0 05 96 at 1 KHz 74 dB Diameter 120 or 80 mm Thickness 1 2 mm 125 Hz 8 KHz 40 dB 35 dB 50 dB eceeeoso 35 Watts CH RMS total harmonic distortion 10 96 45 dB 75 dB 270 W x 317 H x 370 D mm 27 THIS APPLIANCE IS MANUFACTURED BY ELECTRONICS AH68 01144B
39. the playback is processing press the VCD CD Pl button gt gt Press the VCD CD PI button once again to playback again 7 To stop playback press the M button gt A new disc may be inserted in the remaining two compartments excluding the CD which is being played back Press the Disc Changer button to open the CD tray The revolving part does not turn during playbacks If there is not even one CD inserted in the CD tray it is indicated as NO DISC If the CD Repeat function is not selected CDs are played back which automatically stops Zl es re DemoiDin NG O D NE S A GS ar e OQ 11 Selecting a CD in the Disc changer The CD function is automatically selected when Disc Skip is pushed To select a specific disc press the corresponding Disc 1 2 3 button on the front panel or Disc Skip on the remote control until the required disc indicator flashes Result All the discs will be played in turn starting with the one selected gt gt If you wish to play the current disc only press CD Repeat on the front panel one or more times until 1 CD is displayed gt ol you use the Disc 1 2 3 function when listening to the radio or to a tape the system switches automatically to the CD mode If the disc selected is not loaded the next disc is played automatically Open Clos jo O
40. tton is pressed the following appears in the display and on the TV screen Lch MONO MONO y STEREO L CH R CH Lch MONO Only the left channel instrumental parts is played back through both the right and left speakers Rch MONO Only the right channel vocal parts is played back through both the right and left speakers STEREO Cancels the Multiplex Sound normal stereo playback resumes gt You can select between listening to the tone from the left channel the right channel or both channels AlSleep Shuffle Return Time Search Sound Slow Control CQ Co GC Co KEY CONTROL Function This function can work only at VCD mode when microphone is connected Press the Key Control button to adjust the key to your voice the 15 step key control you can select Result Each time the Key Control b button is pressed the following appears on the TV screen l b Low Pitched Key ft High Pitched Key gt Key control function and VCD slow playing function do not work at the same time AlSleep Shuffle Return Time Search Sound Slow r KeyControl 17 VCD VIEW function ZOOM Function This function can be used conveniently to search a desired track in a VCD This 1 Press Zoom button during playback function is possible in VCD Ver 1 1 and Ver 2 0 menu off mode Result The picture being reproduced will be enlarged twice as large When you w
41. u have a few seconds to set the required options If you exceed this time you must start again Switch the system on by pressing Standby On Press Timer Clock until TIMER is displayed Press Enter Result ON TIME is displayed instead of the equalizer symbols for a few seconds followed by any switch on time already set you can set the timer switch on time Set the timer switch on time Set the hour by pressing the 164 PPI buttons b Press Enter Result The minutes flash Set the minutes by pressing the 144 PPI buttons d Press Enter Result OFF TIME is displayed instead of the equalizer symbols for a few seconds followed by any switch off time already set you can now set the timer switch off time Set the timer switch off time Set the hour by pressing the 164 PPI buttons b Press Enter Result The minutes flash Set the minutes by pressing the 144 pb buttons Press Enter Result VOL XX is displayed where XX corresponds to the vol ume already set Press Tuning Down and Up to adjust the volume level and press Enter Result The source to be selected is displayed pressing the 144 PPI buttons to select the source to be played when the system switches on If you select You must also TAPE cassette Insert a recorded cassette in one of the decks before setting the system to standby TUNER radio Press Enter b Select the FM or AM frequency band by pressing the 4
42. vailable from your local dealer Tape Decks 1 Press PUSH EJECT to open the cassette deck 2 Use a cotton bud and a special cassette cleaning agent to clean the Head 1 Rollers 2 Drive capstans 3 f you will not be using the remote control for a long time remove the batteries to prevent corrosion Although your system is very hard wearing it should not be used in an excessively dusty environment or subjected to shocks or extreme heat close to heating appliances or in direct sunlight etc If the unit emits an unpleasant odor when in use unplug it from the main supply and contact the after sales service 25 Precautions When Using Compact Discs Handle your compact discs with care Always hold them by the edges to avoid leaving fingerprints on the shiny surface When you have finished playing a compact disc always put it back in its case Do not fix paper or adhesive tape to the discs and do not write on the label Clean them with a special purpose cloth Store your compact discs in a clean place out of direct sunlight where they will not be exposed to high temperatures Always use compact discs marked Precautions When Using Audio Cassettes Check that the tape in the cassette is sufficiently taught To prevent erasing a cassette that you wish to keep remove the safety tab on the upper edge of the cassette To record a c
Download Pdf Manuals
Related Search