Home
Samsung AS09F User's Manual
Contents
1. button Result The temperature and fan settings are adjusted automatically The air conditioner cools the room as quickly as possible After 30 minutes the air conditioner is reset automatically to the previous mode temperature and fan settings You can select the Turbo function in the Auto and Cool mode If you select this function in the Dry or Fan mode it will return to the Auto mode 3 If you wish to stop the Turbo function before the end of the 30 minute period press the button one or more times until disappears Result The air conditioner is reset automatically to the previous mode temperature and fan settings 4 To control the direction of the air flow refer to pages 13 Adjusting the Air Flow Direction Vertically I o Zz wi Depending on the position of the indoor unit on the wall of your room you can adjust the position of the outer air flow blade on the bottom of the unit thus increasing the efficiency of the air conditioner I SE TEME 5 1 Press the button one or more times as required TU gt LA Result The outer blade is adjusted vertically Sal gt ICE 2 If you want the blade to move up and down automatically when the air conditioner is operating press the button D Result The blade move up and down around the base position set 3 Tostop the blade moving up and down pr
2. indoor unit is on if necessary press the button on the remote control Check whether the Timer indicator on the indoor unit is switched on If so Wait until the switch on time is reached and the air conditioner starts up automatically Cancel the timer see pages 14 and 15 for further details Check that there are no obstacles between you and the indoor unit Check the remote control batteries Check that you are close enough to the indoor unit seven meters yards or less No beep is heard when you press the E on the remote control Check that you are pointing the remote control at the remote control sensor in the right of the indoor unit Replace the remote control batteries if necessary The air conditioner does not cool Check that the correct operating mode has been selected Auto Cool The room temperature may be too low Dust may be blocking the air filter guard refer to page 19 for cleaning instructions Check that there is no obstacle in front of the outdoor unit The fan speed does not change when you press the button Check that the operating mode is set to the Auto Cool or Fan mode in the Dry mode the fan speed changes automatically The air flow direction does not change when you press the button Check that the air conditioner has been switched on if necessary press the button on the remote control The timer is not correctly triggered Check that the
3. timer has been programmed correctly see pages 14 and 15 Odour is permeated in the room during air conditioning Air the room Cleaning Your Air Conditioner To get the best possible use out of your air conditioner you must clean it regularly to remove the dust that accumulates on the air filter ae o l O Z Li PORTANT Before cleaning your air conditioner ensure that you have switched off the breaker used for the unit 1 Open the upper front grille by pulling the lower right and left tabs of the grille 2 Pull air filters out of each tab of the grille 3 Remove all dust on the air filters with a vacuum cleaner or brush 4 When you finished insert air filters by fixing it to each tab of the grille 5 To close the front grille fix it to hooks and push down the lower right and left tabs of the grille 6 Clean the front grille with a damp cloth and mild detergent do NOT use benzene solvents or other chemicals Nota If you have not used the air conditioner for a long period of time Set the fan going for three to four hours to dry the inside of the air conditioner thoroughly To remove minute dust particles and odors deodorizing and Bio filter are installed in the air conditioner You should clean the filters every 3 months 1 Open the upper front grille by pulling the lower right and left tabs of the grille 2 Pull out the deodorizing and Bio filter Yr Bio Filte
4. when the unit was last used The indoor unit beeps Good Morning PORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being Plugged in Stopped It will start up normally after three minutes 2 If the bis not displayed at the top of the remote control press the button on the remote control one or more times until it appears Result The indoor unit beeps each time you press the button The air conditioner runs in the Auto mode The Auto mode cools the room in optimum condition by adjusting the indoor temperature depending on the set temperature Nota You can change modes at any time 3 To adjust the temperature press the amp button one or more times until the required temperature is displayed Possible temperatures are between 16 C and 30 C inclusive Result Each time you press the amp button The temperature is adjusted by 1 C The indoor unit beeps Cooling Your Room You must select the Cool mode if you wish to adjust the Cooling temperature Fan speed when cooling 1 If necessary press the button Result The operation indicator on the indoor unit lights up The air conditioner starts up in the mode selected when the unit was last used The indoor unit beeps PORTANT The air conditioner is fitted with a protection mechanism to prevent the unit fr
5. N Timer indicator GREEN Turbo indicator RED Power On Off button AS F Series AS J Series AS W Series OP Unit AS09 Series Air Inlet Rear Connection Valve Connection Valve OAP Unit AS18 Series Air Inlet Rear Air Outlet Connection Valve OAP Unit AS24 Series Air Inlet Rear Air Outlet Connection Valve I 2 O Z LU Remote Control Buttons and Display Remote control transmission indicator ag Mode Mode selection button Operating mode IN AUTO COOL AUTO COOL DRY oF AN Temperature setting DRY FAN am i Temperature adjustment KC gt buttons st Turbo button Turbo mode Good Morning mode hy mt Fan speed adjustment Fan speed TIE a button S Air flow direction gt Swing button ON TIMER On Timer setting __ lam OnT HA LULU n On Timer button OFF TIMER Off Timer setting pra Tier Ot Timer mao Off Timer button miM Battery discharge indicator Set Cancel Good Morning button Ty On Off amp Timer Set Cancel button You must insert or replace the remote control batteries when You purchase the air conditioner The remote control does not work correctly Nota 4 Use two AAA LRO3 1 5V batteries Do not use old batteries or different kinds of batteries together Batteries may be completely discharged after 12 months even if they have not actual
6. USER S MANUAL ASO9F Series AS12Fx Series AS18Fx Series AS24Fx Series ASO9J Series AS12J Series AS18J Series AS24J Series ASOOW Series AS12Wx Series AS18Wx Series AS24Wx Series Fy l Z lt o 77 uw esi ITALIANO Split type Room Air Conditioner Cool EMAHNIKA DEUTSCH PORTUGU S OOOO OG DB98 26505A 1 Safety Precautions The following safety precautions must be taken when using your air conditioner fh WARNING Risk of electric shock e Can cause injury or death e Disconnect all remote electric power supplies before servicing installing or cleaning e This must be done by the manufacturer or its service agent or a similar qualified person in order to avoid a hazard DURING OPERATION Users of this product are cautioned not to attempt repair of this product at their own discretion Instead they are requested to directly contact a designated service center or the outlet at which the product was purchased Never spill any kind of liquid into the unit Should this happen unplug or main switch off the unit and contact an authorized service center Do not insert anything between the air outlet blades because the inner fan may be damaged and could cause injury Keep children away from the unit Do not place any obstacles in front of the unit Do not spray liquid of any kind into the indoor unit Should this happen switch off the breaker used for your air condition
7. de and or the temperature by pressing the button or the S button after setting the Off Timer To Cancel the Off Timer If you no longer wish to use the Off Timer that you have set you can cancel it at any time 1 Tocancel the Off Timer press the button one or more times until the timer setting disappears 2 Press the button Nota If you want to tum off the air conditioner before the timer reaches the setting time press the button OFF TIMER OFF TIMER Good Morning CI SS d I 2 O Z Ww Selecting Good Morning Mode For cool only model The Good Morning function can be set whether the air conditioner is switched on or off and this function can be selected for any mode Selecting the Good Morning mode as a default the Off Timer will switch off the air conditioner after 8 hours automatically or you can press the TI button to set Off Timer in the range from 0 5 hour to 12 hours then press the button to confirm this selection during the period of Good Morning mode the possible temperatures are between 16 C and 30 C inclusive but the fan speed and the direction of the air flow is nonadjustable em Good Morning 1 Press the remote control button one or more times until A is displayed on your Result The indoor unit beeps If Good Morning is selected after switching on the unit the air On Timer conditioner will run in Cool
8. e room temperature too much 1 If necessary press the button Result The operation indicator on the indoor unit lights up The air conditioner starts up in the mode selected when the unit was last used The indoor unit beeps PORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being Plugged in Stopped It will start up normally after three minutes 2 Ifthe Ca is not displayed at the top of the remote control press the button on the remote control one or more times until it appears Result The indoor unit beeps each time you press the button The air conditioner runs in the Dry mode Nota You can change modes at any time 3 To adjust the temperature press the amp button one or more times until the required temperature is displayed Possible temperatures are between 16 C and 30 C inclusive Result 788 Each time you press the Ss button The temperature is adjusted by 1 C The indoor unit beeps The air conditioner starts removing the excess humidity the quantity of air is adjusted automatically The fan is running in auto mode 4 To control the direction of the air flow refer to pages 13 Airing Your Room If the atmosphere in your room is stale you can air the room using the Fan feature 1 If necessary press the button Resul
9. er and contact your installation specialist Make sure that the unit is correctly ventilated at all times Do not place clothing or other materials over it Ifthe wireless remote control will not be used for a long time remove the batteries If applicable When using a wireless remote control the distance should not be more than 7 meters from the air conditioner If applicable DISPOSING OF THE UNIT Before throwing out the device it is necessary to pull back the battery cells and get rid of them safely for recycling reasons When you need to dispose of the unit consult your dealer If pipes are removed incorrectly refrigerant may blow out and come into contact with your skin causing injury Releasing refrigerant into the atmosphere also damages the environments Please recycle or dispose of the packaging material for this product in an environmentally responsible manner OTHERS Never store or ship the air conditioner upside down or sideways to avoid damage to the compressor The appliance is not intended for use by young children or infirm persons without supervision Young children should be supervised to ensure that they do not play with the appliance Max current is measured according to IEC standard for safety and current is measured according to ISO standard for energy efficiency ae o l O Z L Contents 4 PREPARING YOUR AIR CONDITIONER E Safety Precautions i m ais slani daik
10. ess the button again Nets Ifyou switch the air conditioner Then the blade is Off Closed completely On again Set to the initial position powered Flow Direction Horizontally There are two sets of inner air flow blades Just as the outer air flow blade can be adjusted vertically the inner blades can be adjusted horizontally 1 Adjust each set of inner blades to the required position by pushing or pulling them sideways Setting the On Timer 4 ri Db Good Morning The On Timer enables you to switch on the air conditioner automatically after a given period of time You can set the period of time from 0 5 hour to 24 hours 1 To set the operating time press the button one or more times until the required time is displayed Possible time is between 0 5 hour and 24 hour inclusive 2 Press the button to complete the setting Result The remaining time is displayed Blinking of the timer indicator stops The selected mode and the temperature on the display disappear after 10 seconds The air conditioner will switch on automatically when the counter displayed on the remote control reaches the set time and disappears the On Timer setting 3 Toselect an operating mode in advance press the button until the desired mode is displayed at the top of the remote control Result The air conditioner will run in
11. in selale 2 E View ofthe UNit ae kaan aa ra garage Sin saa aaa 4 mM Remote Control Buttons and Display E Inserting the Remote Control Batteries OPERATING YOUR AIR CONDITIONER E Selecting the Automatic OperatingMode 8 E Cooling Your ROOM PAA RE 9 MRemovingExcessHumidily 10 E Airing Your ROOM aaa a saree gyz ii 11 E Changing the Room Temperature Cuickly 12 E Adjusting the Air Flow Direction Vertically E Adjusting the Air Flow Direction Horizontally PROGRAMMING YOUR AIR CONDITIONER E Setting the Om T MER sisindiran innia 14 M Setting the Off T MER aaa aaa aaa 15 E SelectingGoodMomingMode 16 RECOMMENDATIONS FOR USE E Operating Recommendations E TemperatureandHumidityRanges 17 E Operating Your Air Conditioner Without the Remote Control 17 E Solving Common Problems 18 MCleaningYourAirConditioner 19 E Cleaning Deodorizing and Bio filter Option 19 View of the Unit The design and shape are subject to change according to the model In nit Ca Inlet a Temperature sensor Power On Off button Air filter Air flow blades under the grille outlet Operation indicator GREE
12. ly been used 1 Push the battery cover on the rear of the remote control with your thumb in the direction of the arrow and remove it 2 Insert the two batteries taking care to respect the polarities 4 on the battery with on the remote control 4 on the battery with on the remote control 3 Close the cover by sliding it back until it clicks into place ae Co l O wi Getting Started F You have just purchased a split type air conditioner and it has been installed by your installation specialist Your Owner s Instructions contains valuable information on using your air conditioner Please take the time to read it as it will help you take full advantage of the unit s features The booklet is organized as follows The following figures are shown on pages from 4 to 6 Indoor and outdoor units Remote control buttons and display They will help you find the buttons and understand the symbols displayed Inthe manual you will find a series of step by step procedures for each function available The illustrations in the step by step procedures use three different symbols HOLD DOWN Selecting the Automatic Operating Mode You can start the air conditioner in Auto mode from your remote control 1 tton If necessary press the button Result The operation indicator on the indoor unit lights up The air conditioner starts up in the mode selected
13. mode During this period the temperature displayed is one you set for the Cool mode If the Good Morning is selected before switch on the unit the air conditioner starts running in Cool mode and the temperature is set to 26 C The fan is running in auto mode G Off Timer D D 5 a To Cancel the Good Morning If you no longer wish to use the Good Morning that you have set you can cancel it at any time 1 press the 9 button to switch off the air conditioner D 2 To cancel a selected Good Morning mode you can also press the Wei Luba or button Good Morning UNOS Operating Recommendations Here are a few recommendations that you should follow when using your air conditioner Topic Recommendation Power failure If a power failure occurs when the air conditioner is operating the unit is switched off When the power returns the air conditioner starts up again automatically Temperature and Hum lt JJ O 3 m ae D o Li The following table indicates the temperature and humidity ranges within which the air conditioner can be used If the air conditioner is used at Then High temperatures The automatic protection feature may be triggered and the air conditioner stopped Low temperatures A water leak or some other malfunction may occur if the heat exchanger freezes High humidity levels Water may condense on and drip from the su
14. om being damaged when it is started immediately after being Plugged in Stopped It will start up normally after three minutes 2 Ifthe Sk is not displayed at the top of the remote control press the button on the remote control one or more times until it appears Result The indoor unit beeps each time you press the button The air conditioner runs in the Cool mode You can change modes at any time 3 To adjust the temperature press the amp button one or more times until the required temperature is displayed Possible temperatures are between 16 C and 30 C inclusive Result Each time you press the T button The temperature is adjusted by 1 C The indoor unit beeps The air conditioner starts cooling provided that the room temperature is higher than the selected temperature If the room temperature reaches the set temperature the air conditioner stops cooling but the fan is still operating 4 Select the fan speed by pressing the button one or more times until the required setting is displayed Sail Automatic rotated fa abg gt Saag CH Low al Medium Sul High Seal Maximum Result Each time you press the button the indoor unit beeps 5 Tocontrol the direction of the air flow refer to pages 13 ENGLISH Removing Excess Humidity If the atmosphere in your room is very humid or damp you can remove excess humidity without lowering th
15. r 3 Wash the filters with clean water then dry them in the shade 4 Insert the filters into the original position Nota You can change the position of filters with each other 5 Close the front grille Contact SAMSUNG WORLD WIDE If you have any comments or questions regarding a Samsung products contact the SAMSUNG customer care center Country BELGIUM Customer Care Center ry 02 201 2418 ELECTRONICS Web Site www samsung com be CZECH REPUBLIC 844 000 844 www samsung com cz DENMARK 38 322 887 www samsung com dk FINLAND 09 693 79 554 www samsung com fi FRANCE 08 25 08 65 65 0 15 min www samsung com fr GERMANY 01805 121213 0 12 min www samsung de HUNGARY 06 40 985 985 www samsung com hu ITALIA 199 153 153 www samsung com it LUXEMBURG NETHERLANDS 02 261 03 710 0900 20 200 88 0 10 min www samsung lu www samsung com nl NORWAY 231 627 22 www samsung com no POLAND 0 801 801 881 www samsung com pl PORTUGAL SLOVAKIA 80 8 200 128 0850 123 989 www samsung com pt www samsung com sk SPAIN 902 10 11 30 www samsung com es SWEDEN 08 585 367 87 www samsung com se U K 0870 242 0303 www samsung com uk
16. rface of the indoor unit if it is used for long periods Mode Outdoor Temperature Indoor Temperature Indoor Humidity Cooling 19 C to 43 C approx 16 C to 32 C approx 80 or less Drying 19 C to 43 C approx 16 C to 32 C approx X If the cooling operation is used at over 32 C indoor temperature it does not cool at its full capacity Operating Your Air Conditioner Without the Remote Control Your air conditioner can be operated directly from the indoor unit if the remote control is lost or broken 1 To switch the air conditioner on press the ON OFF switch on the right side of the indoor unit Result The OPERATION indicator on the indoor unit comes on The indoor unit beeps The air conditioner starts up in the appropriate mode for the room temperature 2 To switch the air conditioner off press the ON OFF switch again Nota Even if the air conditioner has been switched on via the ON OFF switch operations can still be controlled using the remote control as usual s Sol g Common Problems Before contacting the after sales service perform the following simple checks They may save you the time and expense of an unnecessary call Problem Explanation Solution The air conditioner does not operate at all The air conditioner does not operate with the remote control Check that the breaker used for the air conditioner is switched on Check that the operation indicator on the
17. t The operation indicator on the indoor unit lights up The air conditioner starts up in the mode selected when the unit was last used The indoor unit beeps 2 ifthe CS is not displayed at the top of the remote control press the button on the remote control one or more times until it appears Result The indoor unit beeps each time you press the button The air conditioner runs in the Fan mode The temperature is set automatically Notts You can change modes at any time 3 Select the fan speed by pressing the button one or more times until the required setting is displayed Sy Low Sun o Medium Sail High Result Each time you press the button the indoor unit beeps 4 Tocontrol the direction of the air flow refer to pages 13 I 2 O Zz LU Changing the Room Temperature Quickly The Turbo cooling function is used to cool your room as quickly as possible Example 3 You have just come home and find that the room is very hot You wish to cool it down as quickly as possible The Turbo function operates for 30 minutes with the maximum settings before returning automatically to the mode and temperature previously selected 1 If necessary press the button Result The operation indicator on the indoor unit lights up The air conditioner starts up in the mode selected when the unit was last used The indoor unit beeps 2 Pressthe
18. the selected mode when it is tumed on Not If you don t operate the remote control after setting the On Timer it will be tumed off automatically after 25 hours To Cancel the On Timer If you no longer wish to use the On Timer that you have set you can cancel it at any time 1 To cancel the On Timer press the button one or more times until the timer setting disappears 2 Press the 2 button Nota If you want to tum on the air conditioner before the timer reaches the setting time press the button Setting the Off Timer The Off Timer enables you to switch off the air conditioner automatically after a given period of time You can set the period of time from 0 5 hour to 24 hours 1 To set the operating time press the button one or more times until the required time is displayed Possible time is between 0 5 hour and 24 hour inclusive 2 Press the Ge button to complete the setting Result The remaining time is displayed Blinking of the timer indicator stops The air conditioner will switch off automatically when the counter displayed on the remote control reaches the set time and disappears the Off Timer setting Bemal Ifyou would like to turn the air conditioner on after 2 hours and to operate it for 2 hours 1 Press the button until 2 Hr is displayed 2 Press the button 3 Press the button until 4 Hr is displayed 4 Press the 22 button Nota You can see or change the setting mo
Download Pdf Manuals
Related Search
Related Contents
Lettre au Port de Québec - Société des Gens de Baignade Compucase 6T29BS-U3T computer case Manuel d`utilisateur White 634D Sewing Machine User Manual Global Map Raster Devel- opment (GMRD) Tool User`s Manual 発注仕様書2 Manual de utilização para Radiocomando Remocom Copyright © All rights reserved.
Failed to retrieve file