Rocketfish RF-WHD200 User's Manual
Contents
1. rocket 4 Port WirelessHD Kit Rocketfish RF WHD200 4 Port WirelessHD Kit Contents Safety information asa 3 Feature S odpad O EG W A 4 Setting up the HDWireless Kit suanuanasnasuanosna2 9 Using the WirelessHD Kit esansanonsanoanosnossanonnoa 13 SpecificationS O Gwda 19 Legal NOtiICES OW ARA GG 21 One year warranty wada ada 23 Introduction Thank you for purchasing this high quality Rocketfish system which represents the state of the art in 60 GHz wireless transceiver design and gives you complete freedom while enjoying your music or movies without the limitations of cables The system has a maximum transmission range of up to 32 8 feet 10 meters line of sight within the same room and can be used with your HDMI compatible home theater components gaming systems or computer Please note that the 60 GHz frequency will not penetrate walls so this product is not to be used to transmit AV signals from one room to another This User Guide explains how to correctly install operate and get the best performance from your WirelessHD kit Read this guide carefully before installing your system and save it for future reference m rocket Safety information The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient ma2. Where is the warranty valid This warranty is valid only to the original purchaser of the Product in the United States and Canada What does the warranty not cover This warranty does not cover Customer instruction Installation Set up adjustments Cosmetic damage RF WHD200 23 Damage due to acts of God such as lightning strikes Accident Misuse Abuse Negligence Commercial use Modification of any part of the Product including the antenna This warranty also does not cover Damage due to incorrect operation or maintenance Connection to an incorrect voltage supply Attempted repair by anyone other than a facility authorized by Rocketfish to service the Product Products sold as is or with all faults Consumables such as fuses or batteries Products where the factory applied serial number has been altered or removed REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY ROCKETFISH SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT INCLUDING BUT NOT LIMITED TO LOST DATA LOSS OF USE OF YOUR PRODUCT LOST BUSINESS OR LOST PROFITS ROCKETFISH PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
3. type Range AV port Dimensions Weight AC power adapter Operating environment total system Video format WirelessHD HDMI V1 4a 3D 60 GHz HDMI 32 antenna array integrated ceramic 32 8 ft 10 m Transmitter 4 ports CEC pass through Receiver 1 port CEC pass through Transmitter 7 39 x 6 18 x 2 17 in 187 6 x 157 0 x 55 2 mm Receiver 6 06 x 4 72 x 1 89 in 154 0 x 120 0 x 48 0 mm Transmitter 12 87 oz 365 g Receiver 8 54 oz 242 g AC90 230 V 660 Hz input TX DC12V1 0A RX DC 5V 2 0 A Operating temperature 32 104 F 0 40 C ambient Storage temperature 4 158 F 20 70 C Operating humidity 10 to 90 non condensing Storage humidity 5 to 90 non condensing Video Vertical Color 59 94 60 Hz YCbCr 24 30 bits 480i 4 4 4 24 30 bits RGB 4 4 4 24 30 bits 59 94 60 Hz YCbCr 4 2 2 24 30 bits 480p 4 4 4 24 30 bits RGB 4 4 4 24 30 bits 50 Hz YCbCr 4 2 2 24 30 bits 576i 4 4 4 24 30 bits RGB 4 4 4 24 30 bits 50 Hz YCbCr 4 2 2 24 30 bits 576p 4 4 4 24 30 bits RGB 4 4 4 24 30 bits RF WHD200 19 Video Vertical Color 50 Hz YCbCr 24 30 bits 4 4 4 24 30 bits 720p RGB 4 4 4 24 30 le 59 94 60 Hz YCbCr 4 2 2 24 30 bits 4 4 4 24 30 bits RGB 4 4 4 24 30 bits 50 Hz YCbCr 4 2 2 24 30 bits 4 4 4 24 30 bits ands RGB 4 4 4 24 30 bits 59 94 60 Hz YCbCr 4 2 2 24 30 bits 4 4 4 24 30 bits RGB 4 4 4 24 30 bits 23 976 24 Hz YCbCr 4 2 2 24 30 bits 4 4 4 24 30
4. 003 et RSS 210 du Canada Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device 09840 EU Declaration of Conformity DoC Hereby Abocom Systems Inc declares that this device is in compliance with the essential requirements and other relevant provisions of the R amp TTE Directive 1999 5 EC LVD EMC EMF Radio as attested by conformity with the following harmonized standards EN 60950 1 2001 A11 2004 EN 60065 2002 A1 2006 EN 301 489 1 V1 8 1 2008 04 EN 62311 2008 EN 302 567 V1 1 1 rocket One year warranty Rocketfish Products Rocketfish warrants to you the original purchaser of this new RF WHD200 Product that the Product shall be free of defects in the original manufacture of the material or workmanship for one 1 year from the purchase of the Product Warranty Period This Product must be purchased from an authorized dealer of Rocketfish brand products and packaged with this warranty statement This warranty does not cover refurbished Product If you notify Rocketfish during the Warranty Period of a defect covered by this warranty that requires service terms of this warranty apply How long does the coverage last The Warranty Period lasts for one year 365 days beginning on the date you purchased the Product Th
5. DMI 2 When the indicator is on this HDMI port is in use HDMI 1 When the indicator is on this HDMI port is in use u e w p Power and link status indicator 1 Blinking The power is on and the receiver is searching for the transmitter or is in sleep mode On The transmitter and receiver are linked Off the power is off RF WHD200 5 Receiver front top panel rocketfish nem Description 0000000000 1 Power and link status indicator 5 Blinking The power is on and the receiver is searching for the transmitter or is in sleep mode e On The transmitter and receiver are linked Off the power is off Transmitter back panel DCIN jack Connect the power adapter labeled transmitter to this jack 2 Power switch Turns the transmitter on or off 3 HDMI WVAN switch A quick press lt 1 second toggles the HDMI switch input to select the next HDMI input Along press gt 3 seconds toggles WirelessHD output between one or more WirelessHD receivers in the same room 4 7 HDMI input Connect up to four HDMI source devices to the HDMI inputs using high speed HDMI cables rocket Receiver back and side panels Right side view Back view Left side view EJ Description 1 HDMI jack Connect this port to an HDMI input on the TV or projector using a high speed HDMI cable 2 DC IN jack Connect the power adapter labeled Receiver to this jack 3 Power
6. MI Onkyo SimpLink LG HDAVI Control EZ Sync VIERA Link Panasonic EasyLink Philips NetCommand for HDMI Mitsubishi INlink Insignia rocket 6 To turn the WirelessHD kit off perform one of the following steps Power off your TV or projector and source devices when the WirelessHD transmitter and receiver have not detected a signal they will automatically go into sleep mode Note When the WirelessHD transmitter and receiver go into sleep mode the power and link status LEDs on both units will blink slowly Also note Some HDMI source devices like TiVo set top boxes have no easy way to shut them off The automatic HDMI port selection feature in the WirelessHD transmitter will therefore always select such an always on source and will always keep the WirelessHD transmitter connected to the receiver In this case please use steps below e Manually place the WirelessHD transmitter into sleep mode by pressing the SLEEP button on the included remote control be sure to point the remote toward the WirelessHD transmitter Turn the power switch on the WirelessHD transmitter and receiver to the OFF position 7 To return the WirelessHD transmitter and receiver from sleep mode to on perform the following steps a Power on the TV or projector and switch it to the HDMI input with which the WirelessHD receiver is connected b Power on the source device you wish to view that is connected to the WirelessHD tra
7. PURPOSE ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED WILL APPLY AFTER THE WARRANTY PERIOD SOME STATES PROVINCES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE Contact Rocketfish For customer service please call 1 800 620 2790 www rocketfishproducts com Distributed by Best Buy Purchasing LLC 7601 Penn Avenue South Richfield Minnesota U S A 55423 3645 2011 BBY Solutions Inc All rights reserved ROCKETFISH is a trademark of BBY Solutions Inc Registered in some countries All other products and brand names are trademarks of their respective owners D rocketfish www rocketfishproducts com 800 620 2790 Distributed by Best Buy Purchasing LLC 7601 Penn Avenue South Richfield MN 55423 3645 USA 2011 BBY Solutions Inc All rights reserved ROCKETFISH is a trademark of BBY Solutions Inc All other products and brand names are trademarks of their respective owners 10 1353 ENGLISH
8. Poorly constructed HDMI cables can negatively impact performance and may not support all of the features included with your connected source devices Do not place the transmitter or receiver inside a cabinet or other location where they will not have a clear view of the room Refer to the following setup diagrams to arrange your transmitter and receiver For best performance the transmitter and receiver should face each other with the receiver mounted vertically to the wall next to the TV not behind the TV or upside down on the ceiling next to the project ensuring that the Rocketfish and WiHD logos can be seen from the position in the room where the transmitter will be e ie Floor located Top view Transmitter Side view a Yo o awa x N pe A p gt N 1 A 16 4ft 5 m l l I q N r N I f 47 i i i Transmitter ____328ft 10m UE i 32 8 ft 10 m ransmitter I RR Z A Z Z gt eceiver l l 4 i I 47 7 I sx ga 4 82 164ft 5 m s I s p I N 5 I ma 4 16 4 ft 5 M eo cciver 164 5m GATT TIP PAI Note The transmitter and receiver must be located within the same room The wireless signal will not pass through walls floors or ceilings RF WHD200 9 Connecting the WirelessHD transmitter and receiver To connect the WirelessHD transmitter and receiver 1 Connect up to 4 HDMI enabled so
9. bits RGB 4 4 4 24 30 bits 50 Hz YCbCr 4 2 2 24 30 bits 1080p 4 4 4 24 bits RGB 4 4 4 24 bits 59 94 60 Hz YCbCr 4 2 2 24 30 bits 4 4 4 24 bits RGB 4 4 4 24 bits VGA 60 Hz RGB 4 4 4 24 30 bits SVGA 60 Hz RGB 4 4 4 24 30 bits XGA 60 Hz RGB 4 4 4 24 30 bits SXGA 60 Hz RGB 4 4 4 24 30 bits WSXGA 60Hz RGB 4 4 4 24 30 bits rocket 3D video support list 1080p 23 98 24 Hz Frame packing 720p 50 59 94 60 Hz Top to bottom 1080p 23 98 24 Hz 720p 50 59 94 60 Hz Side by side 1080i 50 59 94 60 Hz Audio format Audio up to 8 channel 24 bit 192 kHz LPCM surround sound audio 6 8 channel PCM Dolby Digital DTS Audio sample rate F s LPCM 2 6 8 channels Multiple of Fs prs and Dolby Digital 2 6 channels 32 kHz 44 1kHz 48kHz 88 2kHz 96 kHz 176 4kHz 192 kHz 128 4 096 5 645 6 144 11 29 12 288 22 579 24 576 256 8 192 11 29 12 288 22 579 24 576 45 158 49 152 LPCM 2 channel Legal notices Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that
10. bling the WirelessHD function on the laptop and will require powering on the WirelessHD transmitter rocket Troubleshooting Receiver will not link to Transmitter Possible Solutions For best performance mount the receiver on the wall next to the TV or on the ceiling next to a projector with a clear view of the room It should NOT be mounted behind the TV or projector Try positioning the receiver above below or next to the TV projector and check for best signal quality before securing the mounting bracket to the wall or ceiling The power LED on the transmitter and the receiver will blink continuously while the transmitter is not linked to the receiver This can be caused by the receiver being located too far away from the transmitter The maximum non line of sight range is approximately 33 ft 10 m Try re positioning the transmitter and receiver units so they are within the specified operating range First try to get the units to link with each other at 3 ft 1 m to prove that they are working properly with your equipment Then try moving them further apart to the desired locations Materials may be blocking the 60 GHz radio frequency beam from the transmitter to the receiver This beam can pass through many cabinet materials such as glass and wood depending on thickness and density of the materials but it cannot pass through doors shelves or components that are made of metal Try po
11. e purchase date is printed on the receipt you received with the product What does this warranty cover During the Warranty Period if the original manufacture of the material or workmanship of the Product is determined to be defective by an authorized Rocketfish repair center or store personnel Rocketfish will at its sole option 1 repair the Product with new or rebuilt parts or 2 replace the Product at no charge with new or rebuilt comparable products or parts Products and parts replaced under this warranty become the property of Rocketfish and are not returned to you If service of Products and parts are required after the Warranty Period expires you must pay all labor and parts charges This warranty lasts as long as you own your Rocketfish Product during the Warranty Period Warranty coverage terminates if you sell or otherwise transfer the Product How to obtain warranty service If you purchased the Product at a retail store location take your original receipt and the Product to the store you purchased it from Make sure that you place the Product in its original packaging or packaging that provides the same amount of protection as the original packaging If you purchased the Product from an online web site mail your original receipt and the Product to the address listed on the web site Make sure that you put the Product in its original packaging or packaging that provides the same amount of protection as the original packaging
12. gnitude to constitute a risk of electric shock The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance Warning To reduce the risk of fire or electric shock do not expose the included devices to rain or moisture Caution To reduce the risk of electric shock do not disassemble any component of the kit There are no user serviceable parts inside Refer servicing to qualified service personnel Read these instructions Keep these instructions Heed all warnings e Follow all instructions Do not use the included devices near water Clean only with a dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs c
13. he WirelessHD Receiver so that the video and audio from the player is seen on the TV Again proper HDMI CEC support is required on both the source and the display Note that the HDMI CEC standard Rev 1 4a supports a maximum of three CEC playback devices that can be directly displayed by name on a CEC enabled display If a fourth HDMI CEC enabled source is connected to the WirelessHD transmit adapter it will not show up by name on the HDMI CEC TV In this case the device must be selected using the included remote control or by quick presses less than 1 second of the HDMI SW switch on the back of the transmitter until the desired HDMI input is selected Also note that if your HDMI CEC TV is capable of displaying the CEC names of your HDMI CEC sources AND switching between them using your TV remote via the TV s input selection menu you should be able to use the TV remote control to switch from your WirelessHD transmitter to other WirelessHD source devices in the same room However if your TV does not support changing between HDMI CEC sources that are connected to a wireless or wired HDMI switch you will need to power on off the WirelessHD function on your sources to switch between them For example without full TV support for CEC source switching you may need to power off the Rocketfish WirelessHD transmitter in order to be able to switch to a laptop with embedded WirelessHD Switching back to the WirelessHD transmitter may require disa
14. interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected RF WHD200 21 Consult the dealer or an experienced radio TV technician for help This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with minimum distance 20cm between the radiator amp your body IC Class B Statement Canada This Class B digital apparatus complies with Canadian ICES 003 and RSS 210 Cet appareil num rique de la classe B conforme a la norme NMB
15. k of the transmitter Make sure that you are using high speed certified HDMI cables for all connections and that all cable connections are secure We recommend high quality Rocketfish HDMI cables available at your local Best Buy or Future Shop store Troubleshoot by connecting the HDMI cable directly from the HDMI source to the HDMI display bypassing the Rocketfish adapters to verify that audio video is available Try both the HDMI source side cable connected originally to the transmitter as well as the display side cable connected originally to the receiver to verify that you do not have a defective cable Make sure that your content i e Blu ray or DVD disc is original HDMI includes HDCP copy protection which prevents playback of illegally copied movies HDMI s CEC function which is supported by the WirelessHD Kit is not standard across all brands of consumer electronics If your original remotes do not operate your components when pointed at the TV projector or transmitter you will need to continue to point your remotes towards the components themselves regardless of where they are located in the room Make sure that fresh batteries are installed in your remote controls Make sure that you are pointing the remote control at the correct device The WirelessHD Kit remote input must be pointed at the transmitter not at the receiver m rocket Specifications Standards Frequency Input Output interface Antenna
16. l be mounted securely attach the receiver mounting bracket to the wall 3 Mountthe receiver onto the mounting bracket by sliding the slots on the bottom of the receiver downward onto the tabs on the bracket Using the WirelessHD Kit Upon completion ofthe setup process and successful linking of the WirelessHD transmitter and receiver follow these steps to use the WirelessHD kit 1 Power on the TV or projector that the WirelessHD receiver is connected to and switch to the corresponding HDMI input 2 Power on the WirelessHD receiver RF WHD200 13 3 Power on the source component you wish to view 4 Power on the WirelessHD transmitter 5 Switching the WirelessHD transmitter to the correct HDMI input Note When switching between the four HDMI ports it is normal for the switching to take an average of about 10 seconds sometimes up to 20 seconds the further the WirelessHD transmitter and receiver are from each other the longer the switching will take The WirelessHD receiver will output a black video screen at 480p 720 x 480 resolution 60Hz with no audio during the switching process The WirelessHD transmitter may automatically switch to the HDMI port of the source device that is most recently powered on depending on the type of source component that is connected If it does not automatically switch to the correct HDMI port or you want to switch to a different HDMI port for another source device follow o
17. ne of the following steps Press the corresponding button on the included remote control HDMI 1 4 to switch the WirelessHD transmitter to the HDMI port for the source device you wish to view be sure to point the remote at the WirelessHD transmitter e If you have misplaced the remote control or do not wish to use it you can also quickly press the HDMI SW button on the back of the WirelessHD transmitter to sequentially toggle through the four HDMI ports Note Be sure to quickly press the HDMI SW button for less than one second to switch HDMI ports If you hold this button down for three seconds or more the transmitter will search for a different receiver and you may lose the connection between the transmitter and receiver If this happens press and hold the HDMI SW button again for at least three seconds to re establish the link between the WirelessHD transmitter and receiver e If your TV or projector and source devices support CEC consumer electronics control you will see the available connected devices on the Input screen of the TV or projector Simply select the device you wish to view by selecting it from this on screen list Refer to the documentation that came with your devices to verify if CEC is supported often marketed under different trade names including Anynet Samsung Aquos Link Sharp BRAVIA Sync Sony HDMI CEC Hitachi Kuro Link Pioneer CE Link and Regza Link Toshiba RIHD Remote Interactive over HD
18. nsmitter Note Depending on the brands models of devices you have connected the WirelessHD transmitter and receiver may automatically return from sleep mode and re establish their link If this does not happen with your devices use the SLEEP button on the included remote control to manually return the WirelessHD transmitter and receiver from sleep mode HDMI CEC Consumer Electronics Control support For best operation connect sources which are HDMI CEC capable DVD Blu ray player and so on to your WirelessHD transmitter If your TV is also HDMI CEC v1 3a or newer capable your TV s OSD on screen display should let you select any of the HDMI CEC source devices connected to the WirelessHD transmitter adapters on the WVAN Turning off an HDMI CEC enabled TV sends a broadcast message to all wired HDMI and WirelessHD source devices giving them the opportunity to power off automatically if they support HDMI CEC and this option is enabled in the device s settings RF WHD200 15 Similarly when an HDMI CEC enabled source device such as a Blu ray player is connected to the WirelessHD transmitter and the WirelessHD receiver is connected to an HDMI CEC enabled TV pressing the Play button on the Blu ray player s remote does the following Turns on the Blu ray player Establishes a WirelessHD connection from the Transmitter to the Receiver e Turns onthe TV e Switches the TV to the proper HDMI input connected to t
19. o select the desired input port See step 5 in Using the WirelessHD Kit section on page 13 Note The transmitter and receiver are pre paired and should discover each other shortly after being powered on However should you experience an excessively long delay over five minutes for the link to be established press the HDMI WVAN switch on the back of the transmitter for at least three seconds to establish the link the receiver must also be powered on during this process Mounting the receiver on a wall For best performance mount the receiver on the wall next to the TV or on the ceiling next to a projector with a clear view of the room It should NOT be mounted behind the TV or projector Try positioning the receiver above below or next to the TV or projector and check for best signal quality before securing the mounting bracket to the wall or ceiling If mounting the receiver on the wall or ceiling is not an option for your installation the receiver can be placed on a flat surface but the operating range may be reduced To mount the receiver on a wall 1 Place the included receiver mounting bracket on the wall or ceiling in the desired location and mark the holes with a pencil Note The mounting location should be within the length of the included power cord to an available AC outlet m rocket 2 Using appropriate wall anchors and screws not included for the type of wall or ceiling where the receiver wil
20. onvenience receptacles and the point where they exit from the apparatus RF WHD200 3 Only use attachments or accessories specified by the manufacturer Unplug the included devices during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when a component of the kit has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped The included devices shall not be exposed to dripping or splashing and no objects with liquids such as vases shall be placed on the apparatus The AC power adapter is used as the disconnect device This disconnect device shall remain readily operable Read the rating labels on the bottom of the base station and wireless speaker for power input and other safety information Features Package contents The box should contain 60 GHz WirelessHD transmitter e 60 GHz WirelessHD receiver Mounting bracket for receiver HDMI cables 2 e AC power adapter 2 Remote control Quick Setup Guide User Guide rocket Transmitter front top panel H4 H3 H2 H1 I item Deseription 0000000000 HDMI 4 When the indicator is on this HDMI port is in use HDMI 3 When the indicator is on this HDMI port is in use H
21. sitioning the transmitter and receiver so that they are not blocked by metal Either the receiver or transmitter is not powered on Be sure the AC adapter is securely connected and each unit is powered on correctly Power cycle both the transmitter and receiver by unplugging then plugging them back in RF WHD200 17 Possible Solutions No video and or audio Remote control does not operate components If the power LEDs on the transmitter and receiver are blinking the adapters are not linked See Receiver will not link to Transmitter troubleshooting steps above If the power LED on the transmitter and receiver are solid not blinking the adapters are linked such that video and audio sent into the transmitter should be output from the receiver Therefore the TV or Projector may not be set to the HDMI input jack that the WirelessHD Receiver unit is connected to Refer to the documentation provided with your TV or Projector for information on how to select the correct input The source component Blu ray DVD player cable satellite box etc is not powered on and or set enable the HDMI output Refer to the documentation provided with your source component for information on switching that component to the HDMI output The transmitter is set to the incorrect HDMI port Switch the transmitter to the correct HDMI port for the component you want to view with either the included remote control or the HDMI SW switch on the bac
22. switch Turns the receiver on or off 4 Cable routing clips Insert HDMI cable into these clips for receiver placement stability RF WHD200 7 Remote control HDMI 3 HOMI 4 Wireless HD Tu Note Remote control design subject to change KA Description SLEEP button Press to put the WirelessHD receiver and transmitter into sleep mode or to wake them up from sleep mode if they do not automatically do so on their own this functionality varies by brand and model of connected components Be sure to point the remote toward each one separately 2 5 HDMI 1 4 Press to select the HDMI port for the signal source of your choice Note Remove the plastic film from the remote control before using it for the first time Make sure you point the remote control at the WirelessHD transmitter Plastic film a J6NIJSUEL GH SS APM ma rocket Setting up the HDWireless Kit Setup tips Test the placement of the transmitter and receiver for a good signal prior to permanently mounting or installing everything For best performance and range mount the receiver vertically on the wall next to the TV NOT behind the TV or upside down on the ceiling next to the projector ensuring that the Rocketfish and WiHD logos can be seen from the position in the room where the transmitter will be located Use only good quality high speed HDMI cables for all connections such as Rocketfish brand cables
23. urce components such as a Blu ray DVD player cable satellite box gaming console laptop etc to the HDMI input jacks on the transmitter using high speed HDMI cables Transmitter Game console HDMI cable Cable Satellite box CA gt amp 536 e Blu ray DVD ee0 m rocket 2 Connect the display device such as a TV or projector to the receiver with a high speed HDMI cable Receiver Display devices Sor A 3 Connect the AC power adapters to the transmitter and receiver and to power outlets Note The included AC adapters are labeled Receiver and Transmitter to ensure that the correct adapter is used for each device 4 Power on your TV or projector and switch to the HDMI input that the WirelessHD receiver is connected to 5 Power on at least one source component that is connected to the WirelessHD transmitter RF WHD200 11 6 Power on the WirelessHD transmitter and receiver The HDMI input port LED on the transmitter should light continously stop blinking to indicate that the desired input is selected with active video If this selection does not occur automatically please use the included remote control or HDMI Select Switch on back of the transmitter t
Download Pdf Manuals
Related Search