Razor Model Vehicle 20036560 User's Manual
Contents
1. Keep your Flash Rider 360 rolling for years with genuine Razor parts Visit our website to purchase replacement parts Specifications subject to change without notice 1 Handlebar Grip x2 6 Rear Wheel Assembly x2 2 Front Fork 7 Seat 2 1 Front Fork Coupling Bolts x4 8 Spark Handle 3 Front Cover 9 Spark Bar 4 Steering Bolt 10 Spark Cartridge 4 1 Lock Nut 11 Spark Cartridge Cover 5 Front Wheel w Pedals and Cranks Complete Fr RO as JI SAFETY REMINDERS PRE RIDE CHECKLIST Loose Parts Tire Care Check and secure all fasteners before every ride Make sure Periodically inspect the wheels for excess wear the steering bolt and casters are tight There should not be any unusual rattles or sounds from loose parts or broken components If you are not sure ask an experienced mechanic to check Frame Fork and Handlebars Safety Gear Check for cracks or broken connections Although broken frames Always wear proper protective equipment such as an approved are rare it is possible for an aggressive rider to crash into a curb safety helmet Elbow pads and knee pads are recommended or wall and wreck and bend or break a frame Get in the habit of Always wear shoes lace up shoes with rubber soles never ride inspecting yours regularly barefooted or in sandals and keep shoe laces tied and out of the way of the wheels DO NOT RETURN TO STORE Failure to follow these instructions may damage your produc2. Razor FLASH RIDER 360 OWNER S MANUAL Read and understand this entire manual before riding DO NOT RETURN TO STORE NOTE Manual illustrations are for demonstration purposes only Illustrations may not reflect exact appearance of actual product Specifications subject to change without notice Item Number v 1_10 11 20036560 CONTENTS Safety Warnings ccccccccccsecceesseeseetsseeeseetseeeeeesteeeeeenses 1 Before You Begi ecserin a 2 Assembly and Set Up cccccccccccceesseeeeeessteeeseeneees 3 4 Set Up and Usage INStructions ccccceceeseeceeeeeeees 5 SAFETY WARNINGS A WARNING Riding the Flash Rider 360 Caster Trike can be a hazardous activity Certain conditions may cause the equipment to fail without fault of the manufacturer The Flash Rider 360 Caster Trike can and is intended to move and it is therefore possible to lose control fall off and or get into dangerous situations that no amount of care instruction or expertise can eliminate If such things occur you can be seriously injured or die even when using safety equipment and other precautions RIDE AT YOUR OWN RISK AND USE COMMON SENSE This manual contains many warnings and cautions concerning the consequences of failing to maintain inspect or properly use your Flash Rider 360 Caster Trike Because any incident can result in serious injury or even death we do not repeat the warning of potential serious injury or death e
3. TICES AND CONDITIONS Always check and obey any local laws or regulations which may affect the locations where the Flash Rider 360 Caster Trike may be used on public property The Flash Rider 360 Caster Trike is meant to be used only in controlled environments free of potential traffic hazards and not on public streets Do not ride your Flash Rider 360 Caster Trike in any areas where pedestrian or vehicle traffic is present Ride defensively Watch out for potential obstacles that could force you to swerve suddenly or lose control Be careful to avoid pedestrians skaters skateboards scooters bikes children or animals who may enter your path and respect the rights and property of others Maintain a hold on the handlebars at all times Never carry passengers or allow more than one person at a time to ride the Flash Rider 360 Caster Trike Never use near steps or swimming pools Never use headphones or a cell phone when riding Parts Breakdown c ccccceceeeeeeeeeeeeeeeeeeeeeeeeeeteteeeeees 6 Safety REMINGESIS vsesixeecsdeaesernaacshoeiars emia arated ees 7 Wama Ny isarat e a an 7 Never hitch a ride with another vehicle The Flash Rider 360 Caster Trike is intended for use on solid flat clean and dry surfaces such as pavement or level ground without loose debris such as rocks or gravel Wet slick or uneven and rough surfaces may impair traction and contribute to possible accidents Do not ride the Flash Ride
4. ach time such a possibility is mentioned APPROPRIATE RIDER USE AND PARENTAL SUPERVISION This manual contains important safety information It is your responsibility to review this information and make sure that all riders understand all warnings cautions instructions and safety topics and assure that young riders are able to safely and responsibly use this product Razor recommends that you periodically review and reinforce the information in this manual with younger riders and that you inspect and maintain your child s Flash Rider 360 to insure their safety The recommended rider age of 6 and older for Flash Rider 360 Caster Trike is only an estimate and can be affected by the rider s size weight or skills Any rider unable to fit comfortably on the Flash Rider 360 Caster Trike should not attempt to ride it A parent s decision to allow his or her child to ride this product should be based on the child s maturity skill and ability to follow rules Keep this product away from children under the age of 6 and remember that this product is intended for use only by persons who are at a minimum completely comfortable and competent while operating the Flash Rider 360 and who understand the risks presented by such products DO NOT EXCEED THE WEIGHT LIMIT OF 160 Ibs 73kg Rider weight does not necessarily mean a person s size is appropriate to fit or maintain control of the Flash Rider 360 Caster Trike ACCEPTABLE RIDING PRAC
5. duce fire e Do not use in any area prone to wildfires or posted by fire authorities as a Fire Hazard Zone e Do not ride at night e Keep sparks away from eyes hair exposed skin and clothing Sparks can burn e Pull up on the Spark Handle to operate sparking feature NEVER push down directly on the Spark Bar spark cartridge or its cover itself e Spark Bar gets hot during use Do not touch after use e Observe all other spark safety warnings and instructions as provided elsewhere in this manual FAILURE TO USE COMMON SENSE AND HEED THE ABOVE WARNINGS FURTHER INCREASES SUCH RISKS OF SERIOUS INJURY USE AT YOUR OWN RISK AND WITH APPROPRIATE AND SERIOUS ATTENTION TO SAFE OPERATION USE CAUTION BEFORE YOU BEGIN Remove contents from box and check parts against parts diagram found on page 6 Remove the foam separators that protect the components from damage during shipping Inspect the contents of the box for scratches in the paint or dents that may have occurred during shipping Because the Flash Rider 360 was partially assembled and packed at the factory there should not be any problems even if the box has a few scars or dents Estimated Assembly and Set Up Time Allow up to 15 20 minutes for assembly Front Fork Assembly Steering Bolt Om Spark Handle Spark Bar Spark Cartridge Cover Rear Caster Wheels Spark Cartridge Required Tools 10mm and 13mm 2 5mm Allen wrenches open wrenche
6. e on bottom and one on bottom bottom of the frame Need Help Visit our web site for replacement parts and product support at www razor com or call toll free at 866 467 2967 Monday Friday 8 00 AM 5 00 PM Pacific Time 4 Q Replacing the Spark Cartridge Friction during sparking will eventually wear out the replaceable cartridge and cause the scooter to stop making sparks Worn out cartridges must be replaced 2 Place a new cartridge in back of the bracket making sure to align the slots on the cartridge with the two legs of the bracket Slide cartridge forward until you hear a click and the thumb tabs are locked in place 1 Using your thumbs press tabs on both sides of the cartridge to release from the bracket Slide car tridge away from you and remove from bracket QO Using the Spark Handle J i j J ae See f NEVER push down directly on the Spark Bar spark cartridge or spark cartridge cover itself 1 Pull up on the handle to operate sparking feature A WARNING Do not attempt to replace cartridge immediately after riding as cartridge will be hot Handle only when cool A WARNING Keep fingers clear of Spark Bar hinge A WARNING Pulling the Spark Handle upwards too strenuously may cause loss of control NOTE Sparks and Spark cartridge life will vary based on the amount of pressure applied by spark handle the length of time pressure is applied and the smoothness of the riding surface
7. eadset tube with pin on fork as shown J Vi o PLY Sy 5 RELI 3 Re insert the coupling bolts through the front fork and tighten securely A WARNING Failing to properly tighten the steering bolt that attaches the front fork assembly to the frame assembly can cause you to lose control and fall ASSEMBLY AND SET UP OU Attaching the Rear Caster Wheels Required Tools 5mm Allen wrench Spring lt Washer A ss N 1 Insert the caster bolt into the 2 Using a 5mm Allen wrench 3 If you re having trouble thread frame If aligned correctly the caster tighten the hex bolt located on the ing the caster into frame use a rag thread should go half way into the underside of the wheel cover until or small brush with a little WD frame with no resistance the caster bolt is all the way inside 40 to remove any excess particles the frame that may be caught in or around the Note Make sure the spring washer threading within the frame is on the caster bolt before inserting Note There should be no visible the caster threading between the frame and the wheel cover See Inset Q Attaching the Seat Required Tools 2 5mm Allen wrench Co 4 1 Remove the four coupling 2 Align the four holes in seat 3 Tighten bolts using two 5mm bolts from the frame using two with the four holes in frame Insert Allen wrenches one on top and 5mm Allen wrenches one on top coupling bolts through the top and on
8. r 360 Caster Trike in mud ice puddles or water Avoid excessive speeds that can be associated with downhill rides Never risk damaging surfaces such as carpet or flooring by use of a Flash Rider 360 Caster Trike indoors Do not ride at night or when visibility is impaired PROPER RIDING ATTIRE Always wear proper protective equipment such as an approved safety helmet Elbow pads and kneepads are recommended A helmet may be legally required by local law or regulation in your area Always wear shoes never ride barefooted or in sandals and keep shoelaces tied and out of the way of the wheels Do not wear clothing that might get caught in wheels or sparking mechanism A warnine SPARKS CAN INDUCE FIRE To reduce the risk of SERIOUS INJURY or FIRE PARENTS and RIDERS Make sure riders understand that sparks can start a fire Keep sparks away from flammable or combustible substances Use only under close adult supervision BE RESPONSIBLE Safety is important Parents must review the following warnings and instructions with each rider e Never use your caster trike to try to start a fire Your caster trike emits localized sparks when the Spark Bar on a moving trike comes in contact with hardened outdoor surfaces like asphalt or concrete Be responsible e For outdoor use only on solid clean dry hardened surfaces Keep sparks away from substances that can catch fire such as dry vegetation paper chemicals or gasoline Sparks can in
9. s included included A WARNING DO NOT USE NON RAZOR PRODUCTS WITH YOUR Flash Rider 360 The Flash Rider 360 has been built to certain Razor design specifications The original equipment supplied at the time of sale was selected on the basis of its compatibility with the frame fork and all other parts Certain aftermarket products may or may not be compatible and will void your warranty Need Help Visit our web site for replacement parts and product support at www razor com or call toll free at 866 467 2967 Monday Friday 8 00 AM 5 00 PM Pacific Time 2 ASSEMBLY AND SET UP Attaching the Front Fork Required Tools 13mm open wrench and 5mm Allen wrench N A 1 Remove the steering bolt and locknut from the frame assembly with a 13mm open wrench and 5mm Allen wrench 2 Insert the front fork into the frame assembly 4 Re insert the steering bolt and secure with locknut using a 13mm open wrench and 5mm Allen wrench Attaching the Front Wheel Required Tools 5mm Allen wrench and 10mm open wrench ll N oN o rie N 2 Insert the wheel assembly into the front fork assembly and align holes When installing the wheel make sure the letter F and arrow located on the side of the wheel are facing the direction as shown above 1 Remove the four coupling bolts from the front fork with a 5mm allen wrench and 10mm open wrench 3 Be sure to properly align slot in h
10. t and void your warranty WARRANTY Razor Limited Warranty For your records save your original sales receipt with this manual The manufacturer warranties this product to be free of manufacturing defects for a period of 6 months from date of purchase This Limited Warranty does not cover normal wear and tear or any damage failure or loss caused by Item Number improper assembly maintenance storage or use of the Razor Flash Rider 360 20036560 f This Limited Warranty will be void if the product is ever e used in a manner other than for recreation e modified in any way e rented The manufacturer is not liable for incidental or consequential loss or damage due directly or indirectly to the use of this product Razor does not offer an extended warranty If you have purchased an extended warranty it must be honored by the store at which it was purchased Need Help Visit our web site for replacement parts and product support at www razor com or call toll free at 866 467 2967 Monday Friday 8 00 AM 5 00 PM Pacific Time U S Patent No D593 910 S Printed in China for Razor USA LLC PO Box 3610 Cerritos CA 90703 Copyright 2003 2012 Razor USA LLC All rights reserved RAZOR and the Razor Logo De sign are among the registered trademarks of Razor USA LLC in the United States and or select foreign countries Flash Rider is a trademark of Razor USA LLC 10 2011
Download Pdf Manuals
Related Search