Radio Shack XTS 36 User's Manual
Contents
1. Zs 40 1994 fm Page 4 Wednesday August 11 1999 8 11 AM RADIO SHACK LIMITED WARRANTY This product is warranted against defects for 5 years from date of purchase from Radio Shack company owned stores and authorized Radio Shack franchisees and dealers Within this period we will repair it without charge for parts and labor Simply bring your Radio Shack sales slip as proof of purchase date to any Radio Shack store Warranty does not cover transportation costs Nor does it cover a product subjected to misuse or accidental damage EXCEPT AS PROVIDED HEREIN RADIO SHACK MAKES NO EXPRESS WARRAN TIES AND ANY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE DURA TION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN Some states do not permit limitation or exclusion of implied warranties therefore the aforesaid limi tation s or exclusion s may not apply to the purchaser This warranty gives you specific legal rights and you may also have other rights which vary from state to state We Service What We Sell 9 94 RADIO SHACK A Division of Tandy Corporation Fort Worth Texas 76102 7A5 Printed in Malaysia gt p2. AW a F 40 1994 fm Page 1 Wednesday August 11 1999 8 11 AM XTS 36 MINI SPEAKER CONNECTING THE SPEAKER You need speaker wire not supplied to con nect the speaker to your receiver or amplifier We recommend you use wire that is color cod ed or marked on one side Use 18 gauge or larger speaker wire for distances up to 50 feet For greater distances use 16 gauge wire Your local Radio Shack store has a wide selection of speaker wire Note For maximum bass response and the best overall performance be sure the polarities match when you connect the speaker to the re ceiver or amplifier positive to positive and neg ative to negative 1 With the speaker in its appropriate loca tion measure the distance from the speaker to the receiver or amplifier Then route the proper length of speaker wire from the speaker to the receiver or ampli fier Cautions e Avoid routing the speaker wire near other electrical wires e Do not nail or staple the speaker wire Frequency Response Speaker Complement SPECIFICATIONS 140 Hz 20 kHz Power Handling 15 watts RMS Maximum Power 30 watts Impedance 8Q 3 7 62 cm full range Enclosure Sealed high density plastic cabinet for extended bass response Dimensions 55 8 39 16 33 8 Inches HWD 14 2 x 9 0 x 8 5 cm Shipping Weight 1 4 Ibs 0 6 kg 2 Split apart 4 inches of speaker wire on each end 3 Strip 4 inch of insula
3. tion from each wire s end Then twist the ends of the wire to secure any loose strands Speaker Wires 4 While pressing and holding down the black negative terminal tab on the back of the speaker insert one end of the negative bare wire into the opening Then release the tab 1995 Tandy Corporation All Rights Reserved Optimus and Radio Shack are registered trademarks used by Tandy Corporation o Cat No 40 1994 SA Zs 40 1994 fm Page 2 Wednesday August 11 1999 8 11 AM 5 Repeat Step 4 to insert one end of the pos 7 Repeat Step 6 to connect the other end of itive bare wire into the red positive termi the positive bare wire into your receiver or nal on the back of the speaker amplifier s positive speaker terminal 6 Using the wire s color coding as a guide 8 You can place the speaker on a desk insert the other end of the negative bare shelf or table You can also hang it on a wire into your receiver or amplifier s nega wall using the keyhole slot on the back of tive speaker terminal the speaker Connections for Two Speakers RADIO SHACK A Division of Tandy Corporation Fort Worth Texas 76102 7A5 Printed in Malaysia AV a T A 40 1994 fm Page 3 Wednesday August 11 1999 8 11 AM 7A5 RADIO SHACK A Division of Tandy Corporation Fort Worth Texas 76102 Printed in Malaysia N y SVA
Download Pdf Manuals
Related Search