PYLE Audio SLV5400 User's Manual
Contents
1. and ceilings in between the receiver B and transmitter A restrict the distance The video sources do not respond to the remote con trol commands from TV2 Point the remote control directly to the receiver B Replace the batteries of the remote controls with new ones Install the remote control blaster cord G See page 6 The maximum operating distance of the remote control is 5 m The image of the video source dis appears on TV2 Turn off the auto standby mode of the video source See its user manual Follow the instructions to recon nect the video sources See the quick start guide Buzzing sound when you use the remote control Slightly change the position of the receiver or the transmitter until the buzzing sound stops Sometimes it is not possible to solve the problem Black and white image with S VHS VCR Check if the SCART connector of the S VHSVCR gives signal in CVBS See its user manual Cannot record a DVD or video tape C heck if you used full wired SCART cables D VD or video tape is copyright protected 11 N Information Health and safety The product transmits and receives radio waves when it is switched on The product complies with the standards that are defined for it The quality of the image can be influenced by the use of microwave ovens O ther wireless systems Bluetooth wireless networks etc can also have influence on the quality of the im2. program you watch the recorded channel Watch a video source on TV1 Either automatic O perate TV1 and the video source as usual Or manual PHILIPS 1 Switch on the transmitter A 2 Switch on TV1 3 Select the correct SCART input on TV1 4 Select the video source with TV1 SOURCE or press or on the remote control C 5 Switch on the video source 6 Operate the video source with its remote control EJ Use additional features Use VCR DVD recorder features 1 Select a video source with SELECT gt The signal of the video source is connected to the VCR DVD recorder 2 Select the correct SCART input on the VCR or DVD recorder 3 Push RECORD on the VCR or DVD recorder 4 Push PLAY on the video source gt The VCR or DVD recorder now records the image of the video source Sound through your audio amplifier 1 Take an audio cable red and white plugs 2 Plugthe connectors of one end into the AUDIO OUT connectors on the transmitter A 3 Plugthe connectors of the other end into the AUDIO IN connectors of your amplifier Mw 1nnnnnnn innnnnnn L Audio Amplifier 2 Be responsible The making of unauthorised copies of copy protected Respect copyrights material including computer programmes files broadcasts and sound recordings may be an infringement of copyrights and constitute a criminal offence This equipment should not be used for such purposes B Trou
3. NS a Eindhoven 27 06 2005 K Rysman Approbation manager place date signature name and function PHILIPS S Need help Troubleshooting See page 10 Online help www philips com support Helpline Belgi Belgique Belgien Danmark Deutschland Espa a France EM a Ireland Italia Luxemburg Luxembourg Nederland Norge Osterreich Portugal Schweiz Suisse Svizzera Suomi Sverige UK United Kingdom 070 222 303 0 17 3525 8759 0900 1101211 0 12 902 888 784 0 15 08 9165 0005 0 23 0 0800 3122 1280 01 764 0292 899 23 45 06 0 25 40 6661 6544 0900 8407 0 20 2270 8111 0900 060 827 0 20 2 1359 1442 0900 001 600 0600 412 001 08 5792 9100 0906 1010 016 0 15 Specifcations are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners 2005 Koninklijke Philips Electronics N V All rights reserved www philips com DFU SLV5400 AEN V 1 0
4. Wireless TV Link SLV5400 User Manual PHILIPS CONNECT TO 4 VER DVD RECORDER IIIIHIHH Cars qu DVD RECORDER MA TETUER MERECE T CT CU y C PHILIPS i Doon NHIIIIHHIEL b Contents EN Page Overview 4 Control and display elements 4 Your Wireless TV Link 5 Safety 5 Installation 6 Operation 7 Enjoy your W ireless TV Link 7 Use additional features 9 Troubleshooting 10 Information 12 Health and safety 12 Maintenance and service 12 Recycling and disposal 12 W arranty 13 Glossary 13 O verview Control and display elements A Transmitter 1 Onjoffswitch 2 Power light gt red standby gt green on blinking remote control signalling RECORD SOURCE button Link source indication lights TV1 SOURCE button AUTO light Integrated remote control blaster light TV1 source indication display Antenna 10 SCART ports gt 1 SAT STB gt 2 AUX gt 3 DWD for RGB signals gt 4 VCR DVD recorder for RGB signals 11 W ireless channel selection switch 12 Power input connector DC 12V 13 AUDIO OUT connectors red white 14 SCART port for TV1 15 Remote control blaster cord port OANaA URW B Receiver 16 O n off switch 17 Power light gt red standby gt green on blinking remote control signalling 18 Source selector buttons 47 19 Integrated remote control blaster light 20 Antenna 21 W ireless channel selection switch 22 SCART port for TV2 23 Power i
5. age The product is based on RF technology Therefore the product can suffer from the same kinds of interference as GSMs portable radios and other RF based products Maintenance and service If your product is defective and needs repair but your warranty period has expired you can consult our specialists see the rear page Recycling and disposal All redundant packaging material has been omitted Your set consists of materials that can be recycled if disassembled by a specialized company Please observe the local regulations regarding the disposal of packaging materials batteries and old equipment Disposal of your old product Your product is designed and manufactured with high quality materials and components which can be recycled and reused W hen this crossed out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic products Please act according to your local rules and do not dispose of your old products with your normal household waste The correct disposal of your old product will help prevent potential negative consequences for the environment and human health Information EN W arranty One year limited warranty For 12 month from the date of purchase the manufacturer repairs or replaces any faulty product free of charge subject to proof of purchase provi
6. bleshooting Problem Tip No image or wrong Make sure video sources are image on TV1 connected to the transmitter A Make sure the transmitter A is connected to TV1 Make sure SCART cables are firmly inserted Make sure the video source is switched on Make sure the correct SCART input on TV1 is selected Select the correct video source with TV1 source See page 8 No image or wrong Make sure SCART cables are image on TV2 firmly inserted Make sure the receiver B is connected to TV2 Make sure both receiver B and transmitter A are switched on Make sure the video source is switched on Make sure the correct SCART input on TV2 is selected Select the correct video source with 47 on the receiver B fthe video source gives proper image on TV1 Make sure the video source gives video signal in CVBS mode See its user manual Changethe wireless channel that is used for communication See page 7 Thereceiver B is out of range of the transmitter A The num ber of walls and ceilings in between the receiver B and transmitter A restrict the dis tance 10 Troubleshooting L N Problem Tip Interference in the image on TV2 Slightly change the position of the receiver B or the transmitter A Change the wireless channel that is used for communication See page 7 The receiver B is out of range of the transmitter A The number of walls
7. ded the fault has not been caused by improper handling or use and provided the product has not been damaged whether as a result of an accident or of repair by others than the manufacturer Glossary CVBS Video standard for showing colors ona TV Easylink Gives a VCR or DVD recorder the possibility to automatically take over the preset programming of the TV RCA Separate connectors to connect audio or video equipment RF Technology based on radio frequency technology used for wireless connections SCART Single connector to easily connect audio and video equipment 13 is PHILIPS AQ95 56F 613KR report No EC DECLARATION OF CONFORMITY We Philips Consumer Electronics B V P amp A CC Building SBP6 manufacturer s name P O Box 80002 5600 JB Eindhoven The Netherlands manufacturer s address declare under our responsibility that the electrical product Philips SLV5400 00 05 Tx SLV5400 00 T Rx SLV5400 00 R name type or model Wireless TV link product description to which this declaration relates is in conformity with the following standards EN 300 440 part 1 amp 2 2001 9 EN 300 220 1 v1 3 1 EN 301 489 1 V1 2 1 EN 301 489 3 V1 2 1 EN 60065 1998 ed 6 EN 60950 2000 title and or number and date of issue of the standards following the provisions of 1999 5 EC R amp TTE Directive and is produced by a manufacturing organisation on ISO 9000 level y
8. itch on the receiver B 9 Select the correct SCART input on TV2 10 O perate the video source with its remote control 11 If necessary repeat the steps 3 to 10 for the other video sources Installation Ey Remove interference on TV2 1 Find the CHANNEL switch on the transmitter A 2 Set the CHANNEL switch to different number LO CO ece DON O R34 J 3 Find the CHANNEL switch on the receiver B 4 Setthe CHANNEL switch to the same number as on the transmitter Enjoy your W ireless TV Link PHILIPS For basic operation see the quick start guide that came with your W ireless TV Link Welcome Quick star PHILIPS Watch a cable TV program on TV2 Your VCR or DVD recorder needs to be connected to the transmitter A of the W ireless TV Link and connected to the Cable TV signal Switch on the transmitter A Switch on the VCR or DVD recorder Take the remote control of the VCR or DVD recorder with you Go to TV2 Switch on TV2 Switch on the receiver B p 7 Press or on the receiver B to select the VCR or DVD recorder i or press 4 on the remote control C l 8 Select the channel on the VCR or DVD recorder A with its remote control Turn off the auto standby mode when you use the VCR or DVD recorder to watch a cable tv program Refer to the user manual of the VCR or DVD recorder Ifthe VCR or DVD recorder records a television
9. nput connector DC 12V C Remote control G Remote control blaster cord 24 Connector 25 Blaster light Your W ireless TV Link You can say good bye to wires W ith your W ireless TV Link you can now wirelessly connect a second TV and choose between four devices to watch on your second TV Read the instructions in this manual carefully before you connect install and use the product Keep this manual for future reference The product is for indoor use only Do not use the product close to water Do not expose the product to extreme heat In case of technical difficulties do not open the product Bring it to your Philips dealer Do not cover the product Connect the power adapters only to a 220 240 V AC 50 Hz power supply The product can cause interference to other equipment C heck if any equipment near the product can be affected before you start using it Installation For basic installation see the quick start guide that came with your W ireless TV Link Install the remote control blaster cord enue 1 Switch off the transmitter A IR l 2 Connect the remote control blaster cord G to the IR port 3 Position the blaster light in front of the video source See the user manual of the video source for the exact location of the IR sensor on the front panel PRE 4 Switch on the transmitter A 5 Take the remote control of a video source with you 6 GotoTV2 7 Switch on TV2 8 Sw
Download Pdf Manuals
Related Search