PYLE Audio PSWLE82 User's Manual
Contents
1. Part 5 Adjusting display and using cord management Route cords along articulating arms using cord management clips Articulating arms can be adjusted to position display into desired location Use wrench 8 to tighten and loosen the tension screw Do not overtighten or overloosen to make the screws come out Wrench 4x4 Wrench5x5 Thank you for choosing our product Pyle Audio 1600 63rd st Brooklyn NY 11204 718 236 8000 A Warning This product contains small items that could be a choking hazard if swallowed Keep these items away from young children Make sure these instructions are read and completely understood before attempting installation If you are unsure of any part of this installation contact a professional installer for assistance 2 The wall or mounting surface must be capable of supporting the combined weight of the mount and the display otherwise the structure must be reinforced 3 Safety gear and proper tools must be used A minimum of two people are required for this installation Failure to use safety gear can result in property damage serious injury or death PYLE Home INSTALLATION GUIDE Item No PSWLE82 e TV Size Range 37 55 e Maximum Weight Capacity 35kg 77Ibs e VESA 700X500 e Safety automatic lock e Unlock cord caution This product was designed to be installed on wood st2. and four washers F Tighten screws firmly Do not overtighten Secure plastic covers over wall plate by pushing them toward each other until they lock in place z 2 50mm 3 8 10mm Concrete Wall If you think the ribbon is too long You can hide it at the back of the televesion once you want to uninstall the TV it can help you to take out the brackets Magnetic removable bubble level 000000000 Co aa SS Ss c_jq
3. tion please attach these two decorative end caps to the two sides of TV plate FIG A Part 3 Attaching brackets to screen Center brackets vertically on back of screen Select the small A medium B or C or large D screws Attach brackets to screen using four selected screws and four square washers E at the top and bottom of each bracket Tighten screws firmly Do not overtighten i Square washer E Large hole for era M8 screws Medium hole for M5 and M6 screws O small hole for M4 screws 00000000 Part I a Wood Stud Mounting Use wall plate 1 as a template make sure it is level and mark four mounting holes along the center lines of the wood studs Drill four 3 16 Smm dia holes 2 50mm deep Level wall plate 1 and attach to wall with four long bolts G and four washers F Tighten screws firmly Do not overtighten m Stud finder 2 50mm 3 16 5mm Wood stud Ol i bubble level l Magnetic removable Part b Concrete Wall Mounting Part 2 Attaching plastic covers to wall plate Level wall plate 1 and use wall as a template to mark four holes Drill four 3 8 10mm dia holes 2 50mm deep Insert four anchors H into holes and secure wall plate with four long bolts G
4. ud walls and solid concrete walls Before installing make sure the supporting surface will support the combined load of the equipment and hardware Never exceed the Maximum Load Capacity This product is intended for indoor use only Use of this product outdoors could lead to product failure or www pyleaudio com personal injury The depth of this mount 1 3 may not provide sufficient space for proper ventilation on some screens Please refer to the manufacturer s requirements for mounting your screen befourinstallation Hardware Kit Part 4 Mounting the flat panel screen Hook the top of brackets 2 onto the center of wall plate 1 Then swing the screen down Fixed slide block 7 into wall plate by screw 6 NOTE Always use an assistant or mechanical lifting equipment to safely lift and position heavy equipment 8 L gt i Magnetic removable gt bubble level Use the box wrench to loose the ID Qty Description ID Qty Description screw if there s too tight to tilt l l Wall plate A 4 M4x 16mm bolt 2 2 Bracket B 4 M5 x 16mm bolt 3 2 Ribbon G 4 M6 x 16mm bolt 4 TV plate D 4 M8 x 16mm bolt 5 2 Plastic cover E 4 Square washer 6 2 Screw F 4 Long bolt washer 7 2 Slide block Position lock G 4 Long bolt FIG A 8 2 Wrench 4x4 5x5 H 4 Wall anchor Before installa
Download Pdf Manuals
Related Search