PYLE Audio PSWLE07 User's Manual
Contents
1. 5O0mm deep Insert two anchors 3 into holes and secure wall plate with two long bolts 1 and two washers 2 by box wrench 4 Tighten screws firmly Do not overtighten 2 50mm Ni 3 8 10mm Part 2 Attaching Supportable block and TV connection block To Screen First select the small A B medium C D E F or large G H screws To attach supportable block by using selected screws A C E G and washers l and then attach TV connection block to screen by using selected screws B D F H and washers J Tighten screws firmly but do not overtighten WARING screws A B C D need washer screws E F G H don t need washer2. Part 3 Hang the screen Hook the screen onto the wall plate Then swing the screen down Once the screen is settled pull down the Supportable lever so that you can insert the cable NOTE Always use an assistant or mechanical lifting equipment to safely lift and position heavy equipment TV connection block go a _ Wall plate lt ji Supportable block Thank you for choosing our product ATV connection block Pyle Audio 1600 63rd st Brooklyn NY 11204 718 236 8000 A Warning This product contains small items that could be a choking hazard if swallowed Keep these items away from young children Make sure these instructions are read and completely understood before attempting installation If you are unsure of any part of this installation contact a professional installer for assistance 2 The wall or mounting surface must be capable of supporting the combined weight of the mount and the display otherwise the structure must be reinforced 3 Safety gear and proper tools must be used A minimum of two people are required for this installation Failure to use safety gear can result in property damage serious injury or death PYLE Home INSTALLATION GUIDE Item No PSWLEO7 e TV Size Range 23 46 e Maximum Weight Capacity 40kg 88lbs e VESA 100x 100 400x400 www pyleaudio com caution This product was de
3. signed to be installed on wood stud walls and solid concrete walls Before installing make sure the supporting surface will support the combined load of the equipment and hardware Never exceed the Maximum Load Capacity This product is intended for indoor use only Use of this product outdoors could lead to product failure or personal injury Hardware Kit Wall plate TV connection block Bubble level Supportable block ra supportable lever lovirr SE Part a Wood Stud Mounting z Qty Description Long bolt Long bolt washer Wall anchor Box wrench M4x 15mm bolt M4x 16mm bolt M5x 15mm bolt M5x 16mm bolt M6x 15mm bolt M6 x 16mm bolt M8 amp x20mm bolt M8 x 16mm bolt M5 taper washer NINI NIE NTN IN IN IN PNT NM IN ENT N M5 washer ITlOlmnim iol al gt id AI XIN j Use wall plate as a template make sure it is level and mark two mounting holes along the center lines of the wood studs Drill two 3 16 5mm dia holes 2 50mm deep Level wall plate and attach to wall with two long bolts 1 and two washers 2 by box wrench 4 Tighten screws firmly Do not overtighten Wood stud 2 50mm 3 16 5mm joomm 6 Part b Concrete wall mounting Level wall plate and use wall as a template to mark two holes Drill two 3 10 8mm dia holes 2
Download Pdf Manuals
Related Search