PYLE Audio PPD-MXi User's Manual
Contents
1. Connect audio inputs as follows 1 DJ Microphone Connect ir amp i the DJ s Microphone not supplied to the mic input jack with a 1 4 plug DJ MIC 0O 10 dB dB dB dB 2 High Level Output Audio Sources Connect 2 sources Use RCA type tuner cassette deck CD patch cables Player camcorder or VCR to the input jacks for input 1 and input 2 Please note that Phono and Line use the same jacks The selector switch e s below the jacks should be set to Line position if the jacks are used for the High Level input sources described here High Level Output Audio Source Master Input 2 Input 1 O a OO LEFT output y m RIGHT output NOTE Be sure to place the input select switch es in positions which reflect what the connected input source is Line in or Phono In CD player cassette deck camcorder VCR etc 3 Turntables Connect up to 2 turntables to the input 1 and input 2 jacks Please note that Phono and Line use the same jacks The selector Use RCA type w A A switch below the jacks should be set patch cables OO g to Phono position if the jacks are m OO l used for phono inputs Magnetic cartridge turntable When using a turntable you should ae securely conned ground wire Se LEFT output usually green or black to the Groun screw on the input panel of the mixer NS RIGHT output GROUND wire from turntable Pyle Pro Mixer O2. Connecting the Outputs 7 Using the Crossfader Playing the Mixer s Output Signal Using the Tone Controls Recording the Mixer s Output Signal Using the Master Level Control 3 Connecting the Mixer Inputs 7 Troubleshooting 4 Using Headphones 8 Care and Maintenance Using the Mixer Controls 8 Specifications 9 Warranty Input Output Features MIC Volume Control adjust of the input MIC Tone Controls volume for the permit adjustment of microphone the high and low of a selected input Headphone Jack accepts 1 4 plug MIC Input Jack accepts balanced or unbalanced inputs with 1 4 plug mic MIC Volume High Low Phones See 0 5 10 dB dB dB dB Cue 1 Cue 2 0 10 MIC On Cu te Fader Reverse on off Switch Cue Volume Control adjust the headphone Channel Cue selectors volume let you preview an input source using the headphones so you can adjust the volume prior to mixing it in i Pyle Pro Mixer Owner s Manual Input Output Features Video Output for iPod2 Video Signal Power on off Switch Ground Screw for Video Output turntables for iPod1 Video Signal Input 2 Input 1 Purpose stereo Inputs for using a turntable with a magnetic cartridge OR a high level input source Input select Switches set these switches based on what in plugged into PHONO Line input jacks Record Output Jacks to connect the mixer to a tape deck for record the mixed progr
3. You must also include the following items with your return e A copy of your sales receipt or other proof of purchase e A brief letter indicating the problem you are experiencing with the product e Include in your letter your return address daytime phone number and R A number e Also include a check or money order for 20 00 for return shipping handling and insurance or provide your Visa MC number with expiration date Our obligation under this warranty is limited to the repair or replacement of the defective unit when it is returned to us prepaid This warranty will be considered void if the unit was tampered with improperly serviced or subject to misuse neglect or accidental damage w Please complete warranty card detach and return W Place Here PYLE PRO Audio Inc 1600 63rd Street Brooklyn NY 11204 Pyle Pro Mixer Owner s Manual 9
4. 2 Set the selected audio input source s volume to its minimum setting turn it on and set it to play or speak continuously into the microphone Input Source 3 Set the following input source selectors Selector Switches as desired Mixer Audio Input Input Selector Channel Source Switch N Turntable connected to INPUT 1 jacks pman i Or high level output audio source connected to the INPUT 1 jacks PH1 LN1 The iPod inserting to the iPod 1 dock iPod 1 Turntable connected to INPUT 2 jacks PH2 LN2 High level output audio source connected to the INPUT 2 jacks PH2 LN2 The iPod inserting to the iPod 2 dock iPod 2 Pyle Pro Mixer Owner s Manual 5 Mixing the Inputs cont 4 Set the Channel 1 and Channel 2 volume control sliders to approximately 8 10 5 Rotate the Master Volume Control clockwise until you observe an average reading of 0 zero on both Output Level LED meters and leave it at that setting Please note that the Output Level LED meter indicates the total output signal being mixed from all sources for each of the Left and Right channels 6 When adding an audio input source to the mix adjust the corresponding Channel 1 and 2 volume control sliders so you maintain the average reading of O on both Output Level LED meters 7 Adjust the receiver amplifier volume control not the mixer s to the desired volume 8 To turn off the mixer push the Power switch t
5. STEREO MIXER COMPATIBLE WITH iPod a 9 a aa ee aaan ZIT Made for Pod w Please complete warranty card detach and return W Thank you for purchasing this PYLE product To actie Ani warranty registration card warranty please mail this card within 10 days PYLE PRO MIXERS Name Address City State ZIP Model No Serial if available Date of Purchase Purchased at Music Products Store Sound Contractor Installer C Mail Order Catalog Merchandiser Other LJ VE PPD MAI 10 Pyle Pro Mixer Owner s Manual Your PYLE PRO STEREO MIXER COMPATIBLE WITH iPod is a sophisticated control center perfect for mixing sound from multiple playback sources such as microphone tuners CD players turntables or the audio outputs from a VCR This mixer is ruggedly constructed for home or professional use Wide range volume controls permit you to adjust sound levels accurately to achieve just the right mix for playing through your speaker system or for recording Please read this manual thoroughly before you attempt to set up and use the mixer It contains a range of suggestions and instructions to insure safe usage Set up and used properly you can expect years of trouble free service from this product Owner s Manual Table of Contents i Input Output Features 6 Using the Microphone 1 Features and Controls Using the Fader Reverse 2 Presetting Controls Before Use Using the USB 1 and 2
6. am Master Output Jacks to connect the mixer to a receiver or amplifier to use cables with RCA type plugs USB 1 and 2 Features and Controls Input source Selectors let you easily selector your choice of audio inputs for iPod Dock mixing Channel Gain Control lets you adjust the gain of the input source Boeoh Ss Channel 1 2 Tone Controls EQ permit adjustment of the high mid and low of the mixer output signal VU Display with Bright LED 0000000000 0000000000 iG Channel Level Controls allow fingertip control of all sound mixing and fading Master Level Control adjusts the mixer s overall output volume level Crossfader control let you smoothly and quickly switches between two playing input sources Pyle Pro Mixer Owner s Manual 1 Presetting the Controls Before Use Since sudden high output levels from your Pyle Pro mixer can damage not only audio devices connected to the mixer output but your hearing as well especially if you are using headphones please adjust the mixer s controls BEFORE connecting AC power or turning on the unit Set up the mixer controls like this before you start CONTROL SETTING Power On Off Gain Tone Controls Treble Mid and Bass MIC CH 1 2 Master and Cue Levels Crossfader CENTER Connecting the Outputs After presetting the controls above you can then connect the mixer s output jacks to the output devices i
7. maintenance If you have problems refer to the chart below for possible solutions If you cannot solve the problem contact a qualified technician for assistance PROBLEM POSSIBLE SOLUTION Nothing works e Check the AC connection Make sure the AC outlet is live e Check the power connection to the rest of the system receiver amplifier etc No signal from an audio input source e Check the control setting e Check the connection between the mixer and the input source e Check that the turntable s ground wire usually black or green is fastened securely to the GROUND SCREW on the mixer input panel Hum from PHONO Hum from other e Make sure there are no low level inputs connected to the LINE source input jacks Feedback is e Move the microphone further away from the output speakers present or use a directional microphone Pyle Pro Mixer Owner s Manual 7 Care and Maintenance Your Pyle Pro Mixer is an example of superior design and craftsmanship The following suggestions will help you care for your mixer so you can enjoy years of use e Keep the mixer dry If it gets wet wipe immediately e Use the mixer only in well ventilated installations e Handle the mixer gently and carefully do not drop e Keep the mixer away from dust and dirt e Wipe occasionally with a damp cloth to keep it looking new Do not use harsh chemicals solvents or detergents Specifications Input Sensitivity Im
8. minate 3 Turn on the audio input sources you wish to mix and set them to play or talk continuously into the microphone 4 To monitor the audio input sources so that you can decide when to mix in each input see Monitoring Cueing the Inputs 5 To mix the audio input sources so that you can play them through your amplifier system or record them on your tape deck see Mixing the Inputs mic MIC Volume High Low Cue Volume Phones Monitoring Cueing the Inputs Follow these steps to monitor the audio input sources Fader Reverse Off On 1 Perform Steps 1 and 2 of Turning on the Mixer and put headphones on 2 Set the CUE Mix to the channel you wish to monitor CH 1 or CH 2 CUE Mix 4 Pyle Pro Mixer Owner s Manual 3 Set the desired audio input source s volume to its minimum setting turn it on and set it to play or speak continuosly into the microphone 4 Slowly turn the CUE LEVEL contro clockwise until you hear the signal through the headphones at the desired volume level C ye O Cuet Cue2 mic MIC Volume High Fader Reverse Off On Cue Volume CUE Level Control 5 Repeat Steps 2 4 to select and adjust the volume level of the other audio input sources one at a time Mixing the Inputs Follow these steps to mix the audio input sources 1 Perform Steps 1 and 2 of Turning on the Mixer
9. multiple iPods in conjunction with iTunes software you should disable automatic updates first to prevent iTunes from erasing your music during syncronization Pyle assumes no liability arising from the inability to configure iTunes properly 6 Pyle Pro Mixer Owner s Manual Using the Crossfader When the crossfade slider is in the center position the two assigned channels play equally Slide cross fader to the left to fade in CH1 source one and fade out CH2 source two Slide cross fader to the right to fade in CH2 and fade out CH1 Slide cross fader to the center to equally mix the two Crossfader Control Do not slide cross fader to the center when monitoring a channel while another is playing Instead slide cross fader to the channel you are not monitoring For example to monitor channel 1 while channel 2 is playing slide crossover fade to the left CH1 Using the Tone Controls To enhance the sound or tailor the highs mids and low frequencies for each audio source input to the acoustics of a particular performance environment you can adjust the BASS MIDDLE and TREBLE tone controls Using the Master Level Control The overall volume of the mix of all inputs is adjusted using the Master Level control Turning this control clockwise increases the overall system volume Tone Controls Master Level Control Troubleshooting Your mixer should require very little
10. nput jacks Before connecting these devices however be sure to preset their controls to avoid any damage to your equipment due to unexpected high output levels Set the output devices controls like this before you start OUTPUT DEVICE CONTROL SETTING Tape Deck POWER OFF Amplifier Receiver POWER OFF TONE FLAT Playing the Mixer s Output Signal To play the mixer s output signal through your speaker system for events such as parties dances conferences etc connect an audio patch cord with RCA type jacks not supplied from the mixer s MASTER L and R jacks to your receiver amplifier s left and right input jacks Recording the Mixer s Output Signal To record the mixer s output signal connect audio patch cords not supplied from the mixer s REC Record L and R jacks to your tape deck s left and right input jacks 2 Pyle Pro Mixer Owner s Manual Connecting the Mixer Inputs This mixer permits connection of up to five 5 audio input sources including a microphone Such a system might include for example One Microphone One Microphone One Microphone One Microphone Two Turntables One Turntable One Turntable Two iPods Two iPods Two iPods One CD player One CD player One Cassette Deck Two iPods One Rhythm Synth Connect any audio source with a HIGH LEVEL OUTPUT to the input 1 or Please observe input 2 mixer audio input jacks The selector or switch should be set to the following LN position
11. o the OFF position the Power LED will be extinguished Using the Microphone Incorporating Voice into the Mix To blend voice from the microphone with the audio program material adjust the MIC level slider to increase or decrease the microphone level This will not affect the main volume inputs When the microphone is not in use set the MIC level slider to 0 Input Source Volume Control Sliders Using the Fader Reverse Using the Fader Reverse Allows you to reverse the cross fader to control the left side CH1 by the right side of the cross fader and right side CH2 is controlled by the left side of the cross fader Set the switch right to activate the reverse control Set the switch left to deactivate the reverse control Using the USB 1 and 2 Fader Reverse MIC Volume On Microphone Level Control Allows you to use your PPD MXi as a rook RE dock for your iPods Using a standard linens OG x 2 O A to B type USB cable connect the USB _ O O 1 to any personal computer and insert S O O e your iPod into the iPod dock it may be 7a accessed via your PC for the pursose of managing music collections If there is an iPod connected to your PC via the USB 1 you must eject it properly and remove the USB cable to USB 2 Once you have followed this procedure you may reconnect the USB cable and manage music on the opposite iPod Please note that if you plan on using
12. pedance Mic Phono Line 1 5 mV 600 Ohms 3 0 mV 50K Ohms 150 0 mV 27K Ohms Output Level Main Out Record Frequency Response 1 0 V 10 kOhms 180MV 10 kOhms 20Hz 20kHz 3 dB S N Ratio at 1 kHz Mic Phono Line Distortion Mic Phono Line 60 dB 1 5mV input 70 dB 3 0mV input 80 dB 150 0 mV input Tone Control Treble Middle Bass 10kHz 10dB 1kHz 10dB 100Hz 10dB Power Source adapter 15 VAC 1 5A Dimensions inches 1 77 x 10 x 10 mm 45 x 254 x 254 Weight Ibs kg 5 07 2 3 8 Pyle Pro Mixer Owner s Manual Limited Warranty All PYLE PRO products are carefully constructed and tested before shipment Units purchased in the USA are warranted to be free of defects in material and workmanship for two 2 years from the date of purchase This warranty is limited to the original retail purchaser of the mixer Should the unit fail due to factory defects in material or workmanship your unit will be repaired or replaced at the sole discretion of PYLE To obtain warranty service you must first call our Consumer Return Hotline at 718 236 6948 to obtain a Return Authorization Number This R A must appear on the outside of your package and on all paperwork relating to your return When returning the unit to us for warranty service it must be carefully packed and shipped prepaid to R A PYLE PRO Service Center 1600 63rd Street Brooklyn NY 11204
13. wner s Manual 3 Using Headphones Plug a pair of stereo headphones not supplied with a 1 4 jack into the Phones input Using headphones not only affords you the opportunity to listen privately but also enables you to monitor the incoming audio sources so you can locate an exact passage or section before mixing it in It also hag you the opportunity to set up the relative volume level of the upcoming passage before it joins the mix Listen Safely Please observe the following Do not listen at extremely high volume levels Extended high volume listening can lead to permanent hearing loss Follow these guidelines to protect your hearing especially when using headphones Mix mic MIC Volume High Cue Volume aaas Fader Reverse Cuet Cue2 0 10 off Stereo Headphones 0 Always start by setting the volume level to the lowest possible level before listening Put headphones on and then gradually increase the volume as necessary Once you set the volume level do not increase it Over a period of time your ears adapt to a volume level and there is a temptation to increase it Even though such an increase may not cause discomfort it might still damage Using the Mixer Controls your hearing Turning on the Mixer 1 Turn on the output amplifier and temporarily set its volume to the minimum setting 2 On the mixer turn ON the power switch The adjacent power LED will illu
Download Pdf Manuals
Related Search