Home

PYLE Audio PLTDN70 User's Manual

Contents

1. Display u Remote controller 9 Operating status Source Frequency Preset number for radio or TV Playing time sources MAN Manual station selection INFO PTY REG TA TP AF LD Loud selected Used for RDS features EQ Equalizer ST Stereo reception Disc number of CD changer D o i r DAB Digital audio broadcast RPT Repeat playback Disc insertion status SCN Scan playback SAT Satellite radio RDM Random playback yA indicates an optional feature Indicates an optional feature which will display only if the optional device is installed 112 e 2 E O84 ENG 1 2005 6 13 2 46 PM 1H 7113 POWER SRC button Functions the same as the POWER SRC button on the main unit BAND DISC button Functions the same as the BAND DISC button on the main unit NUMBER KEYS buttons Radio TV Press to select from the channels saved in the preset numbers Only buttons 1 to 6 are available Radio TV Press and hoid to save the current channel to the selected preset number Only buttons 1 to 6 are available DVD CD VCD MP3 Press to go to and play the selected chapter track number MUTE button Press to mute the sound Press it again to enable sound DIRECT button Press during DVD CD MP3 and CDDA playback to display
2. Tl E OWA ENG 2 2005 6 13 2 50 PM 4 57 Adjusting touch sensitivity of the LCD panel Severe temperature fluctuations or environmental changes could cause the panel s touch sensitivity to change preventing the icons on the panel from working In this case you can adjust the touch sensitivity of the LCD panel to optimize it How to adjust touch sensitivity 1 Press and hold the SETUP button for one second or longer and then press the ZONE tab 2 In the setup screen press the MENU button for three seconds or longer to display the LCD panel adjustment screen 3 Press 1st gt 2nd 3rd 4th Sth to display the Return icon at the bottom right of the screen 4 Press the Return icon the previous source screen will appear and the LCD panel touch sensitivity adjustment will be completed 5 Try pressing each icon to make sure it works well If not repeat the above procedures T compete LEP Aas Moie Inpat Roten Key iaa 00 TY 9 E OHAL ENG 2 2005 6 13 2 50 PM 4 4 58 m Installing CAR Navigation To install a car navigation system in the Product do the following Model supported by the Product FineMS NAVI system Use the dedicated 13 pin NAVI cable to connect the FineMS NAV system to the Product For 13 pin interface specifications see page 75 Connecting NAVI Use the dedicated 13 pin NAVI cable to connect to a CAR navigation modules supported by the Product The navigation
3. standard is has stored the MP3 files OFF the appropriate value o incorrect according to ISO9660 Level 1 Level 2 standards i The left right Check the BAL FAD Make sure that the files Mkama BALEADSetingis sening ne audio setup eee specific incorrect 5 pi Spaak The center speaker Inthe DVD speaker setup The TV picture Reception is bad Move to another place or a setting is set to set the center speaker to quality is poor change orientation 2 either SMALL or OFF 4 3 LARGE when there The antenna is Make sure that the antenna gt is no center speaker not properly is connected correctly installed connected For antennae with the booster feature check that The front and In the Zone setting Change the Zone setting the boost power is rear speakers the front and rear connected correctly If the generate speakers have diversity feature is set to different different sources OFF change it to ON and sounds reestablish connection z starting from Antenna 1 DVD does not A DVD disc with a Use DVD titles with the play geron ata Same region number ae on The TV screen Reception is Move to another place or g has been the unit displ h i i used plays poor change orientation overlapping a Parental The parental Disable the parental pictures gt protection mode protection mode is protection mode or change is displayed enabled the parental protection The TV screen There is radio Move to another place and DVD does le
4. 5 MHz 107 9 MHz 200 KHz Steps USA2 USA3 CCIR ITALY 76 0 MHz 90 0 MHz 100 KHz Steps Japan VHF1 20 Ch UHF21 69 Ch PA2MF70X PAL I I Ireland 65 0 MHz 74 0 MHz 30 KHz Steps OIRT Great Britain Usable sensitivity 12dB or lower VHF 1 20 Ch UHF21 69 Ch PA2MF70X PAL D K OIRT Stereo separation 25dB 98 1MHz or higher VHF1 12 Ch UHF13 69 Ch PA2MF70X PAL D K China Frequency response 30Hz 10KHz VHF1 19 Ch UHF20 69 Ch PA2BF6SX PAL B B Australia Antenna input 75 4 Ch Diversity 65 EE n QI E QA ENG 2 2005 6 13 2 50 PM 7 66 Audio Amp Rated power output 10 output 20W X 4 1KHz 42 Speaker Impedance 4 8 2 General Power input voltage 14 4V 10 5 16V allowable Current consumption 4 0A 1W Operating temperatures 15 C 60 C Storage temperatures 30 C 85 C Size Main unit 178mm W X 50mm H X 198mm D Tuner Amp unit 178mm W X 38 5mm H X 200mm D Weight Main unit 2 4 Kg Tuner amplifier unit 1 2 Kg System Connection a installation Information regarding the installation of this product is intended primarily for experienced installers The company is not responsible for any problems caused by amateur installation Wrap all the wires securely using wiring clamps or insulating tape Cautions e Do not drill through the bulkhead between the engine and the interior to connect the product s yellow power cable to the car battery Doing
5. 50 PM M9 7 62 DVD player error messages Troubleshooting If you fail to solve problems with any of the following solutions please contact our Service Center a Aa Ea Check Maaa cannot be yaad oe the disc or replace it oa re Connect the lead and Disc C with another one incorrectly the connector correctly Power does The temperature of the Power off the unit and allow not turn on H After determining and Ero DVD loader is 75 degrees it to cool before using again er determining ani Celsius or higher zi The tise has Bown removing ine a 5 replace the fuse with a The temperature of the Power off the unit and warm new one of the same Err 1 DVD loader is minus 30 it up before using again capacity degrees Celsius or lower The spindie motor does Power off the unit and oe ees qne too Poe cane Ens not work properly or at all power it back on If the the unit does cold or hot 5 problem persists contact the E not work Service Center li The buttons The microprocessor is Power off the unit and The disc is jammed in the Power off the unit and do not work malfunctioning due to then power it back on tray it can neither come power it back on Press and and the Or switch off the car 1 out nor go in hold the LA EJECT button to screen does Moise or other causes engine and then switch ray Error force the disc to eject If the not display it back on pr
6. CD ot DVO disc and the unit will automatically power on and play the disc Opening the LCD panel will automatically power on the unit For the sequence of changing sources refer to the k POWER SOURCE button Sarr on page 8 Adjusting the volume Press the VOL button Press the button to increase the volume Press the button to decrease the volume There are 32 volume levels available from 0 to 31 Note IL you power off th wA at Maximum Volume sl sets the limit on the volume when the unit turns 6n oF higher and power it back on ater the volume level will be automatically yas do Pr pauo Volume leval 15 n Q C OWM ENG 1 2005 6 13 2 46 PM 9 146 Note You can adjust the Maximum Volume level from BEEP VOLUME at the setup menu o if you power off the unit at a volume level of 10 or higher and power it back on later the volume level will be automatically s adjusted to the maximum volume levet of 10 A For safe driving keep the volume to a level at which sound Caution from the outside can be heard inside the vehicle Muting the sound 1 Press the MUTE button The sound will be muted and the speaker icon on the screen will change to the MUTE icon 2 Press the MUTE button again to enable sound Note If there is no sound while playing i DvD or r CD check to ee if the unit is in MUTE mode 116 a Checki
7. For more information on how to set PTY see PTY setup on page 22 Press to display the radio setup screen For more information on how to set up radio see Radio setup screen on page 21 Press to enable or disable the AF feature Press to enable or disable the TA feature Press to enable or disable the REG feature Displays the current sound status in EQ graphic format Press to enable or disable the mute feature If mute is enabled the icon will be changed to the mute icon Press to adjust the audio volume Press the or the icon to turn the volume up or down Q Displays information about TP or EON Displays the name of the PS 5 Press the icon to display the RT information 191 n E WA ENG 1 2005 6 13 2 46 PM T 9 7 20 Displays the current time if time display is enabled in user setup Displays the current audio setup or broadcast reception information Features marked with are available in RDS supported models only Non RDS supported models do not display the following icons PTY Program Type AF Alternate Frequency TA Traffic Announcement REG Regional PS Program Service RT Radio Text TP Traffic Program EON Enhanced Other Network Frequency setup When the LCD panel is closed 1 Press the 44 and or gt gt button on the main unit to select the desired frequency 2 If the preset is enabled press a number button 1 6 When
8. for one second or longer and then either press the SOUND tab or press and release the SOUND button at the bottom of the monitor to display p the SOUND SETUP window The NAVI VOICEJ icon will be generated only if a navigation system supported by this product is installed and AV3 MODE in SETUP ETC EXTERN is set to NAVI ON Note To exit the setup menu press the ATN icon AUDIO CONTROL Set up the volume of the left right front rear speakers and various sound effects Wea RTN MAIN SOUND DVD ETC BAL FADER Press the four arrow icons to adjust the volume of the lefV righvfront rear speakers 41i TPIT QHA ENG 1 2005 6 13 2 46 PM M9 2142 142 e LOUD ON Select to boost base 100Hz and treble 10kHz OFF Select for basic sound Note Too loud a volume could diminish the LOUD effect I LOUD s enabled the LOUD or LD mark is displayed at the bottom of the screen and in the information display window BASS EX ON Select to boost bass 100Hz OFF Select for basic sound Note To reset to the factory settings press the Default icon CENTER WOOFER Set up the center and the woofer volumes of the 5 1 channel speaker CENTER Press the or icons to adjust the volume WOOFER Press the or icons to adjust the volume WI RTN MAIN SQUND DVD AUDIO CONTROL W 3 ji asa EQ IRCOFFSET ane AVLVOICE Note T
9. so could fray the cable s insulation causing the product to malfunction or be damaged The hole could also transmit exterior or engine noise to the interior When installing the product s connection cables be careful not to let them interfere with moving parts such as the gear shift handbrake or seat adjustment mechanism The cables could obstruct normal driving leading to accidents Do not shorten the connection cables included in the product Doing so could cause the product s protection circuit to maifunction oe 2 Q E CHAL ENG 2 2005 6 13 2 50 PM 4 9 3 67 This product must be connected to a 12V DC battery with negative grounding Before you connect this product to SUVs trucks or buses check their battery voltage If the voltage is different use a transformer sold separately to adjust the voltage before using the product Before you connect the battery cable be sure to power off the product Failure to do so could cause an electric shock or short circuit Do not install this product s connection cables near to a heater or other source of heat Doing so could lead to loss of cable insulation causing the product to malfunction or be damaged Do not connect the power supply cable to any other equipment Doing so could cause the current capacity of the connection cable to be exceeded resulting in fire or damage to the unit When replacing the fuse be sure to use only fuses compliant
10. system will be automatically detected once the Product is powered on Connection Diagram 158 Configuration Screen W amp I RTN MAIN SOUND DVD ETC S23 Se Wa oe When you use a 13 pin cable not supported by the Product to connect a navigation system see Normal Navigation Systems on page 59 before you start Before you connect the Product to a navigation system check the signal input conditions described in page 58 61 You cannot operate the navigation system through the Product s input unit Using a navigation system system other than one that employs the dedicated 13 pin NAVI cable could cause the Product or the navigation system itself to fail If either the system or the Product fails in this way it is considered to be the responsibility of the user and not C eligible for warranty Caution z c WM ENG_2 2005 6 13 2 50 PM 2159 e Normal Navigation Systems The Product can use navigation systems except for ones supported by the Product that generate CVBS or RGB signal outputs 1 Navigation systems that generate CVBS and AUDIO outputs Connect mono audio and CVBS Connection Diagram AP DLILOHUHONAGOHONA di wa Navi cv8S gies canto i Ji A mapa ug h E NAVI AUDIO i A COON SHOOCDORNONONT ON EXTERN J E EMONITOR EES 2 Navigation systems that generate RGB and AUDIO outputs Connect mono audio and RGB In this c
11. the FREQ icon and enter the frequency Or press the PPI and or 144 button to move to the desired frequency and press and hold the preset button to which to save the frequency until the beep sound is heard Press to listen to a preset broadcast briefly and move automatically to the next preset broadcast To exit the process press the PRESET SCAN icon again while preset scanning is in progress Press to scan the entire frequency range and save the scanned frequencies to preset memory Six stations with the best reception conditions will be automatically selected and saved to the preset numbers To exit the process press the AUTO SAVE icon while auto saving is in progress Note i ci H tie AF or TA feature is enabled oniy ADS stations wil be saved Press to set station scanning to AUTO or MANUAL mode Note Ifthe AF feature is enabled only RDS stations will be scanned ifthe TA feature is enabled only TP stations will be scanned AUTO When the source is radio press the PP button to automatically start to scan the next stations with higher frequencies Press the 44 button to automatically start to scan the next stations with lower frequencies 21 p my Ort O84 ENG 41 2005 6 13 2 46 PM 19 4 22 a a ET AE ee ae en Ae a WAA MANUAL When the source is radio press the DP 1 button to increase the frequency by one step Press the i 4 button
12. the numeric panel where you can enter a number to go to the desired chapter or track VOLUME DOWN UP buttons Press to adjust the volume asl p buttons Radio TV Use the A F buttons to increase or decrease the preset number DVD VCD playback Use the A V buttons to move the cursor on the screen MP3 playback Use the 4 W lt P buttons to move the track to play Use the lt gt buttons to move a page up and down the play list ENTER button Press to confirm the selection for each setting RETURN button Press to return to the previous menu for each setting P11 button PLAY PAUSE Functions the same as the PP button on the main unit OPPI button Functions the same as the PP button on the main unit B 144 button Functions the same as the 11 64 button on the main unit 43 m button STOP Press to stop playing a CD VCD MP3 DVD disc Press the P button again to resume the playback Press the button twice in succession and then press the P button and the source will begin to play from the beginning 13 Tr Ej Waj ENG 1 2005 6 13 2 46 PM aj 14 MODE button Press to change the DVD CD VCD playing mode in the following sequence DVD Disc All Random Normal Repeat Chapter Repeat Title CDNCD Disc All Random Normal Repeat Track MPS Folder Repeat Random Normal Repeat Track amp SCAN but
13. with the standard marked on the fuse holder Using any other fuse could cause the current capacity of the connection cable to be exceeded resulting in fire or damage to the unit When you connect speakers to this product use only speakers of high power type The impedance of such speakers is 4 8 2 ohms and the minimum rating output is 50 W or higher If you connect speakers with an output or impedance other than the indicated values the product or the speakers could be damaged Be careful not to connect the blue lead of the product to the power terminal of the automatic antenna This could cause the Product to malfunction or be damaged Be careful not to connect the blue white lead of the product to the power terminal of the external power amplifier This could cause loss of current and malfunction Be sure to bind exposed cables with insulating tape In particular insulate the connection cables of speakers that are not in use Connection cables that are not insulated could cause electric shock or short circuit This product cannot be installed in a vehicle whose ignition switch has no ACC ON position When using the ground cable black lead separate it from other units that consume high current such as the power amp Failure to do so could cause fire or damage to the product 67 2 E Waj ENG 2 2005 6 13 2 50 PM H 41 68 Components Split bars 2EA Batteries AAA 2 EA
14. you directly 10 the previous source An the NAVIscreen You can press ihe AUDIO icon to switch to he desired audio t lt You an only listen to navigation audio output fom the Front UR n Speakers when the AUDIO source is Set to NAVI Note Navigation products supported by the Product is the following Korea NSS 350M U SA Europe NSS 350D 37 m Q E QU ENG 1 2005 6 13 2 46 PM 7 38 Main setup Press and hold the SETUP button on the main unit for one second or longer and then press the MAIN tab Note To exit the setup menu press the RTN icon SCREEN Adjust the contrast tint color and brightness of the LCD panel WARTN MAIN SOUND DVD ETC _ LANGUAGE CONTRAST Press the or icons to adjust contrast 138 TINT Press the or icons to adjust tint gt COLOR Press the or icons to adjust color BRIGHT Press the or icons to adjust brightness Note ie To reset to the factory settings press the Default icon DIMMER Dim or brighten the LCD panel according to the surrounding brightness aen MAIN SOUND DVD ETC ZONE DIMMER Select either AUTO or USER mode AUTO The sensor attached to the main unit will automatically adjust the LCD panel brightness to the surrounding brightness 119 E W ENG 1 2005 6 13 2 46 PM M9 7 39 a USER Use the or icons to adju
15. DS regions ON Time is synchronized with the RDS broadcasting time e OFF Time is set to the specified value Note ii ee SYNC wili work only in models with the RDS feature The clocks of the unit and of your car may be out of synchronization Synchronize the two clocks change the time o TIME MODE Change the time display mode 12H The current time is displayed in 12H time mode AM PM 24H The current time is displayed in 24H time mode e TIME SET HOUR Set by pressing the A W icons MINUTE Set by pressing the A V icons AM PM Set by pressing the AM or PM icon Note Displayed in 12H hour mode only SET Press the SET icon to save the set time If you go to another menu or return to the previous A screen without saving changes will not take effect Caution The clocks of the unit and of your car may be out of synchronization Synchronize the two clocks TOV E OHA ENG 1 2005 6 13 2 46 PM 4 41 LANGUAGE Set up the on screen display OSD language We RIN MAIN SOUND DVD ETC ZONE LANGUAGE LANGUAGE Press to select the desired language SET Press to set the language that has been selected Note The language you select hete is applied t 050 ply The language of th disc itsen les Mp3 file names DVD pee cannot be changed Sound setup Press and hold the SETUP button on the main unit
16. FUNC button Press to tune in the preset radio station regardless of the current source if the source is radio press and hold the FUNC button to save the current radio station to the button 18 Note For ROS supported models pressing the FUNC button will enable or disable the TA feature regardless of the source Pressing and holding the FUNC button wili enable or disable the AF feature POWER SOURCE button When the power is off press the button to power on the unit When the power is on press and hold the button for one second or longer to power it off To switch between sources press the POWER SOURCE button Source changing sequence Radio TV 1 DVD CD changer 2 NAVI 3 EXTERN 1 The TV source is only displayed in models with a TV tuner 2 The CD Changer source is only displayed if a CD changer is installed 3 The NAV source is displayed only if ETC EXTERN AV3 MODE in SETUP is set to NAVI ON Note You can swich 16 CD changer fil you have oe instated With the power off inser a CD or DVD disc and the unit will automatically power on and play th disc a When the LCD panet is closed open the LGD panel and th unit will automatically power on Eg n Q Ej WA ENG 1 2005 6 13 2 46 PM Wj 9 DI button Pressing the button will automatically activate the scanning of saved preset channels when the source is radio or TV Press and h
17. MW Main unit 1 EA 8 pin link cable 1 EA _ 45 User s manual 1 EA M Rear support strap 1 EA Antenna extensions 3m g Tuner Amp unit 1 EA 2EA 48 Mounting screw M5x6 i 1EA N Remote controller Universal mounting bracket 1EA Selt tapping screws A 1EA TAP5x16 5EA cue 8 Machine screws M4x4 4EA 2 Mounting brackets 2 EA sty A 3 Machine screws for main unit P M5x6 6EA 3 Dou renee 2 EA Machine screws for main unit M4x3 4EA Power cable 18pir 2pin 1EA 13 pin link cable 1 EA sA 168 Eg njo E eH Al ENG 2 2005 6 13 2 50 PM 7 69 an Installing the main unit Method 2 Installation using the rear support strap 1 Fix one end of the rear support strap to the rear of the main unit where the universal mounting bracket is installed 2 Fix the other end of the rear support strap Method 1 Installation using the universal mounting bracket 1 Insert the universal mounting bracket into the vehicle s instrument panel 2 Use a screw driver to bend all the universal mounting lugs inwards There are five lugs each on the top and bottom of the universal mounting A Fix the main unit so that it cannot come loose or vibrate Caution 3 Insert the main unit into the universal mounting bracket until it is secured 4 Refer to System Connection on page 72 and Power Connection on page 73 to install the connection cables 5 Install the
18. OICE see NAVI VOICE on page 44 How to set up presets When the LCD panel is open 1 When the source is TV press and hold the p button to automatically save six stations frequencies with the best reception conditions to preset memory 2 Press the gt 1 m button to automatically scan the saved preset memory When the LCD panel is open 1 See the descriptions in TV setup screen on page 24 Playing DVD source Selecting DVD source 1 Press the POWER SOURCE button on the main unit or the remote controller or the source icon on the LCD panel to select DVD 2 When DVD is selected as source a DVD disc if already in the unit will automatically begin to play DVD video CD MP3 or VCD will be displayed as source depending on the disc that is being played 3 If you insert a DVD disc when the source is not DVD the source will automatically switch to DVD and the corresponding playback screen will be displayed Note we eS It you select DVD as source but do not inserta disc within a Certain period the source will switch to radio DVD video playback Screen configuration If the source is DVD tap on the LCD panel to display a screen where you can control the functions of the DVD player 25 9 nQ E QH4 ENG 1 2005 6 13 2 46 PM 7 26 Displays the active source Press the icon to switch to the next source Displays the number of the title that is bei
19. OL Cuvee z 083139 YIAY3 NON TO yuaiy gt MZIA YSU OL IfdNI O3QIA NOILVDIAVN OL ozga ANANIA a olny 1X301 maa AfdNi 824 NOILY IAYN YJ NYHI a201 000000000000000000000 uf 0000000000000000000000 00000000000000000000000 NOISN3LX3 NAYI YIMOd dol WNILINY oya YNNJLNY JN8YI NIG dEl olavY OL Ko 172 ic 100305 1224 LAOA CY f Toas FSGS Fag l ama aa wa UE Tatad ay OTSA CH N aaa eds ey l l LHDIY 1431 l Gopas BITS TOTS YIM mea ino euusiwy omy Tong STU MAPBUEIO NI oeng BUI NII wOREO INIT OBURIO ifiji Paa Nay S TR an a l mol SE IND ain suayd UMOIE asngysi aose OE NEG AZI o E ee K NO UO uny dwy aiya PE punda TITI TEE KE Ca a kianeg Al KY gt 0123NNG3 NIG d8 UU YOLI3NNOI NIG del m Power Connection m Ca T a A m ya O N gt J z w 1 34 D 64 a n 9 E WAJ ENG 2 2005 6 13 2 50 PM HIO 2 74 m PTY List Lc a News News Weather Weather 2 Affairs Current Affairs 17 Finance Finance 3 Info Information 18 Children Children s Programs 4 Sports Sports 19 Social Social Affairs 5 Educate Education 20 Religion Religion 6 Drama Drama 21 Phone in Phone In i Culture Culture 22 Travel Travel 8 Science Science 23 Leisure Leisur
20. Owner s Manual MOBILE THEATER In Dash DVD Player AM FM TV with CD Changer Control and Motorized 7 Wide TFT LCD Display PYLE view i PLIDN7O WA ooy ake auna www pyleaudio com THON WM ENG 1 2005 6 13 2 46 PM 7 2 P Thank you for choosing the i Before using this product read the instructions in the user s manual carefully After reading it keep the manual for future reference n Q C Q4 ENG 1 2005 6 13 2 46 PM 4 3 Playable discs TV color system DVD Region code Cuations on handling discs Handling discs Cleaning discs Storing discs Parts names and functions When the LCD panel is closed When the LCD panel is opened Display Remote controller Basic operation Powering on off Selecting the source Adjusting the volume Muting the sound Checking the display status Opening Closing the LCD panel Adjusting the angle of the LCD panel Adjusting the extension distance of the LCD panel Flattening the LCD panel Turning on off the LCD monitor Using the touch screen Replacing the batteris NNN DODDO SW Playback Using radio Using TV Playing DVD source DVD video playback Audio CD playback MP3 disc playback Video CD playback Using CD changer Using external input Using NAVI Advanced operation Main setup Sound setup DVD se
21. Press and hold the DISPLAY button the tum the LCD panel on or off When the source is DVD press the button to change display modes DVD Video Total Elapse Total Remain Chapter Elapse gt Chapter Remain Display Off 110 0000 VCD CD Single Elapse Single Remain Total Elapse gt Total Remain OPEN CLOSE button Press to open or close the LCD panel Press and hold the button to maintain the panel in a horizontal position After 10 seconds in this position the alarm will sound and the panel will start to fold upward Press the OPEN CLOSE button to fold the LCD panel upward njo ea ENG 1 2005 6 13 2 46 PM H 9 2 44 Note Maintaining the panel horizontal will enable easy access to AIG Or temperature controls N44 button Radio TV Press the button to go to the previous station channel CD CD changer Press the button to go to the previous track CD DVD Press to go to the previous track chapter When the button is being pressed the reverse high playback speed changes in the following sequence 2x 4x 8x 32x D gt button Radio TV Press the button to go to the next station channel CD CD changer Press the button to go to the next track CD DVD Press the button to go to the next track chapter When the button is being pressed the reverse high playback speed changes in the following sequence 2x 4x 8x 32x Pll but
22. Press to switch between play pause modes Press to stop playing When it is stopped press the P gt icon to resume playing from where it stopped Press the _ icon twice in succession and then press tie P icon to play from the beginning Press the fd icon during MP3 playback for high spdtd playback in the reverse direction When you press the 44 icon the playback speed changes in the following sequence 2x 4x 8x 32x 1x Forward playback Press the PP icon during MP3 playback for high speed playback in the forward direction When you press the PP icon the playback speed changes in the following sequence 2x 4x 8x 32x 1x Forward playback Plays from the beginning of the current track if the current track has played for 10 seconds or longer Plays from the beginning of the previous track if the current track has played for less than 10 seconds Press to play from the beginning of the next track TA will appear in models that support RDS V NAV will appear only if you have installed a navigation system supported by this product selected NAVI ON and set NAV VOICE to ON in SETUP ETC 130 Note Serer a For how to set up NAVI VOICE see NAVI VOICE on page 44 Track setup When the source is MP3 press the TRACK icon to display the following screen Press to enter the number for the track to play Press to delete the nu
23. Press to switch between play pause modes Press to stop playing When it is stopped press the PII icon to resume playing from where it stopped Press the Ml icon twice in succession and then press the PII icon to play from the beginning Press the 44 icon during audio CD playback for high speed playback in the reverse direction When you press the 44 icon the playback speed changes in the following sequence 2x 4x 8x 32x 1x Forward playback Press the PP icon during audio CD playback for high speed playback in the forward direction When you press the PP icon the playback speed changes in the following sequence 2x 4x 8x 32x 1x Forward playback GB Plays from the beginning of the current track if the current track has played for 10 seconds or longer Plays from the beginning of the previous track if the current track has played for less than 10 seconds Press to play from the beginning of the next track TA will appear in models that support RDS V NAVI will appear only if you have installed a navigation system supported by this product selected NAV ON and set NAVI VOICE to ON in SETUP ETC njoi E graj ENG 1 2005 6 13 2 46 PM 1 4 29 Note For how to set up NAVI VOICE see NAVI VOICE on page 44 Track setup SINGLESELARSE When the source is audio CD press the TRACK icon to display the screen Press to enter the number for th
24. Q Ej QHA ENG 1 2005 6 13 2 46 PM 7 23 Screen configuration Tap on the LCD panel while receiving TV signals to display a screen where you can control the TV functions Displays the active source Press the icon to switch to the next source Displays the active TV band Press the icon to switch between TV1 and TV2 Displays the active channel number Press the icon to display the channel input screen For more information on how to set up channels see Channel setup on page 23 Displays the preset number if stations are saved to preset numbers Each time you press the icon the station will switch to the station saved to the next preset number oo o Press to display the TV setup screen For more information on how to set up TV see TV setup screen on page 24 Displays the current time if time display is enabled in user setup Displays the current audio settings or broadcast information TA will appear in models that support RDS V NAVI will appear only if you have installed a navigation system supported by this product selected NAVI ON and set NAVI VOICE to ON in SETUP ETC Note ak For how to set up NAVI VOICE see NAVI VOICE on page 44 Press to enable or disable the Mute feature If Mute is enabled the icon will change to the mute icon Press to adjust the audio volume Press the icon to turn the volume up down Channel setup Wh
25. TILT button Release the button after a beep sound and the LCD panel will move forward or backward When you open the LCD panel again it will move to the last adjusted position a Flattening the LCD panel 1f you need to use the buttons the A C button for example behind the LCD panel you may temporarily flatten the panel for easy access to them 1 With the LCD panel open press the OPEN button until the peep beep sound is heard 2 The LCD panel folds horizontally 3 Press the OPEN button The LCD folds vertically 17 o njo c O84 ENG 1 2005 6 13 2 46 PM MH 7 18 Note p gt Even if the OPEN button is not pressed the LCD panel wilt begin to fold vertically with the alarm sounding after 10 seconds have elapsed i Turning on off the LCD monitor 1 Press and hold the NAVI button for one second or longer The LCD monitor will tum on 2 Press the NAVI button again The LCD monitor will turn off Using the touch screen Touch the icon on the screen to activate the function Hf the icons are not shown tap on the LCD screen once to display them Replacing the batteries 1 Open the battery case cover of the remote controller by sliding it in the direction of the arrow 2 Install two AAA AM4 1 5V batteries as shown in the figure 3 Close the cover 118 Incorrect use of batteries may cause explosion When replacing batteries be sur
26. abled the It icon will change to the mute icon Press to adjust the audio volume Press the icon to turn the volume up down TA will appear in models that support RDS V NAVI will appear only if you have installed a navigation system supported by this product selected NAVI ON and set NAVI VOICE to ON in SETUP ETC Note ye Sy ee For how to set up NAVI VOICE see NAVI VOICE on page 44 136 a Using NAVI If you set ETC EXTERN AV3 MODE in SETUP to NAVI ON the AV3 icon will be replaced by the NAVI icon as the extemal source For information on how to install CAR navigation see Installing Car Navigation in Advanced operation on page 58 Screen Configuration z TA D ROCK DISC The source currently being used is displayed Pressing this icon will switch to the next source The AUDIO source currently being played is displayed Pressing this icon will switch to the next audio source In other words you can simultaneously listen to another AUDIO source while viewing the NAVI screen These icons will not appear if a navigation system supported by this product is installed Ty Q Ej OHA ENG 1 2005 6 13 4 16 PM 7 37 oe Note j For normal car navigation systems that do not use the When Connecting t a Navigation Erie Supported by the dedicated 13 pin NAVI cable you can press the AUDIO Product 5 Use the dedicated 13 pin N AVI cable to ABAKA Vigat
27. aptions are displayed OFF Captions are not displayed 146 a This feature is applied to VCD only For Dvo subtitles may be used instead e Last Memory ON Select to remember where playback stopped When playback resumes it will start from where it left off OFF Select not to remember where playback stopped When playback resumes it will start from the beginning Audio setup RTN MAIN SOUND DYD ETC Note To move the cursor in DVD setup use the direction FU icons on the LCD panel or the direction buttons on the remote controller To select the fron Poe kani pot ont panel or the TENT button on the remote controller n Q C QA ENG_1 2005 6 13 2 46 PM H 4 47 Speaker Setup Rear Speaker Downmix Set up output of the rear speaker Set up when you listen to multi channel audio as 2 channel audio Large Set the rear speaker to produce a large output LT RT Multi channel audio information output is combined Small Set the rear speaker to produce a small output Stereo Multi channel audio information output is in stereo Off Set the rear speaker to produce no output Select if no V SURR Multi channel audio information output is in virtual rear speaker is installed surround OFF Downmix is disabled The original multi channel is used Note Front Speaker You can select rear speaker only if downmix is set to Off Set up out
28. ase G signals must include SYNC Connection Diagram NAVI AUDIO hi i fi hi l vig 03000000000BO0IO0MNI hari oeoacdonorocmnonenenn TONUKDONOLONONDWIO RAN RGB CABLE Configuration Screen 59 WEW ENG 2 2005 6 13 2 50 PM 4 60 3 Navigation systems that generate RGB CSYNC and AUDIO Configuration Screen outputs Connect RGB SYNC and mono AUDIO sty MAIN SOUND DVD ETC Use when G signals do not include SYNC eo It can be used when G signals include SYNC but in this case the NAVI screen will appear only when the screen is set to RGB ONLY mode or RGB CSYNC mode RGB CSYNC mode has clearer picture quality Connection Diagram KA lea ji RGB CABLE 160 mQ CWA ENG_ 2 2005 6 13 2 50 PM 4 64 4 Navigation systems that generate RGB CVBS and AUDIO Configuration Screen outputs Connect RGB CVBS and mono AUDIO Use when G signals do not include SYNC it can be used when G signals include SYNC but in this case the NAVI screen will appear only when the screen is set to RGB ONLY mode or RGB CSYNC mode RGB CVBS mode has clearer picture quality Connection Diagram eves ae JF D NAVI AUDIO Sees Za h wn stl LN y WA products supported by the Prod are the tolowing Sa ae baa ft Korea NSS 350M Bit aaa U S A Europe NSS 8500 LIA RGB CABLE 61 1 01 c O44 ENG 2 2005 6 13 2
29. ber to a preset press the CHANNEL icon and enter the channel Or press the PP 1 or 4 button to move to the desired channel and press and hold the preset button to which to save the channel until the beep sound is heard Press to listen to the preset broadcast briefly and move Q E WA ENG 1 2005 6 13 2 46 PM 7 25 automatically to the next preset broadcasting station To exit the process press the PRESET SCAN icon again while preset scanning is in progress Press to scan all channels in the TV band and save the scanned channels to preset memory Six stations with the best reception conditions will be automatically selected and saved to preset numbers To exit the process press the AUTO SAVE icon while auto saving is in progress Press to set station scanning to AUTO or MANUAL mode AUTO When the source is TV press the PS button to automatically start to scan the next stations with a higher channel number Press the 11 44 button to automatically start to scan the next stations with a lower channel number MANUAL When the source is TV press the PP button to move to the next higher channel Press the 44 button to move to the next lower channel TA will appear in models that support RDS V NAVI will appear only if you have installed a navigation system supported by this product selected NAVI ON and set NAVI VOICE to ON in SETUP ETC Note For how to setup NAVI V
30. both TV and RDS Enter the new password again in the Confirm PWD text box Once you finish entering your password press the o button RIN MAIN SOUND DVD Note H you forget your password you may use the factory setting password which is 1234 Exit DVD setup C al To exit DVD setup select the exit menu or press the RTN icon MAIN SOUND OVD Model that supports RDS but not TV WI RTN MAIN SOUND DVD ETC ZONE Other Setup Press and hold the SETUP button on the main unit for one second or longer and then press the ETC tab The configuration screen 52 m E OMA ENG 1 2005 6 13 2 46 PM MH 4 53 Model that supports TV but not RDS Model that supports neither TV nor RDS WARTN MAIN SOUND DVD Tv Determine whether or not to select diversity antenna channel automatically ON The diversity antenna will automatically select the channel with the best reception out of four channels OFF Only the antenna connected to the no 1 antenna connector will be used Note Bh SS S This product can connect the diversity antenna to four channels If this feature is set to On the cathe Wine eae wili be automatically selected 53 n o Cj onj ENG 1 2005 6 13 2 46 PM 7 54 O EXTERN NAVI ON set as NAVI input BAVD on the EXTERN screen displays NAVI Select the type of external input NAVI OFF set as AV3 input BAVD on the EXTERN scr
31. con to display the screen When the source is CD changer tap on the LCD panel to display a screen where you can control the functions of the CD changer Note E A i You can m select CD ange as source afi you have one installed a 33 Di El AT ENG 1 2005 6 13 2 46 PM Hio 3 34 Screen Configuration Displays the active source Press the icon to switch to the next source Displays the number of the disc in the CD changer that is being played Press the icon to display the disc number input screen For more information on setup see CD changer track setup on page 35 Displays the number of the track that is being played Press the icon to display the track input screen For more information on how to set up track see CD changer track setup on page 35 Displays the playback time information Displays the disc playback mode Press the icon to switch between disc playback modes RPT repeat plays the track that is being played o D RPT repeat plays ail the tracks on the disc RDM plays all the tracks on the disc in random order D RDM selects and plays discs and tracks in random order SCAN plays the first 10 seconds of every track on the current disc consecutively D SCAN plays the first 10 seconds of every disc consecutively Press to switch between play pause modes Press to stop playing When it is stopped press the PII ic
32. ction When you press the P gt icon the playback speed changes in the following sequence 2x 4x 8x 32x 1x Forward playback Press the icon during DVD playback for high speed playback in the forward direction When you press the icon the playback speed changes in the following sequence 2x 4x 8x 32x 1x Forward playback Q Press to play from the beginning of the previous chapter Press to play from the beginning of the next chapter 43 TA will appear in models that support RDS V NAVI will appear only if you have installed a navigation system supported by this product selected NAVI ON and set NAVI VOICE to ON in SETUP ETC E Note 4 2 For how to set up NAVI VOICE se NAVI VOICE on page 44 D 9 E OWA ENG 1 2005 6 13 2 46 PM 4 27 Title chapter setup When the source is DVD press the TITLE or CHAP icon to display the following screen DVD setup screen When the source is DVD press the Setup icon to display the screen Press to enter a title or chapter Press to delete the number entered Press to set the title or chapter entered Press to return to the previous screen without setting a title or chapter Note Ifo matching title cor chapter is found the panel retums to he Previous screen without setting atitle Sr chapter Press to return to the previous screen Press to move to the DVD disc root menu sc
33. e 9 Varied Varied 24 Jazz Jazz Music 10 Pop M Pop Music 25 Country Country Music 11 Rock M Rock Music 26 National National Music 12 Easy M Easy Listening Music 27 Oldies Oldies Music 13 Light M Light Classical 28 Folk M Folk Music 14 Classics Serious Classics 29 Document Documentary t 15 Other M Other Music 174 2 Q E WA ENG 2 2005 6 13 2 50 PM MY 7175 a H W I F Specifications of Car Navigation Supported by the Product ee Navi 13P_DIN_ CABLE ma E 1 Navi ON 2 Volce OW 3 GNO 1 K DATA 2 Touch Data C Syne 1 1 be 4 R 5 G 6 B 8 GND 3 9 Volo 10 10 Voice 13 13 Dotect Out Shield GND fod i en ed ai ced as Socket Front View Specification NAVI 1 26 05 1 NAVI ON DC 5V Power detect Out 2 VOICE ON Mute signal 5V ative OV Out Mute 3 GND Ground 4 Red Out 750 0 7Vp p Out 5 Green Out 75Q 0 7Vp p Out 6 Blue Out 759 0 7Vp p Out 7 CSYNC TTL level Out 8 VGND Video Ground Out 9 Audio Out L 500 mVrms Load Out 47KQ 1Khz 10 Audio Out R 500 mvrms Load Out 47KQ 1Khz 11 KDATA TTL level In Remocon Signal by pass 12 Touch Data Rx TTL level In UART 13 Detect GND Ground Out 75
34. e playback time information Press the icon to switch between playback time display modes SINGLE ELAPSE the current track s elapsed time SINGLE REMAIN the current track s remaining time TOTAL ELAPSE the disc s total elapsed time TOTAL REMAIN the disc s total remaining time Displays the disc playback mode Press the icon to switch between disc playback modes D RPT repeat plays all the tracks on the disc RDM piays all the tracks on the disc in random order NOR plays all the tracks on the disc consecutively RPT repeat plays the track that is being played Press to display the VCD setup screen For more information on the VCD set up see VCD setup screen on page 33 Press to switch between play pause modes Press to stop playing When it is stopped press the PII icon to resume playing from where it stopped Press the W icon twice in succession and then press the PII icon to play from the beginning Press the 44 icon during video CD playback for high speed playback in the reverse direction When you press the 44 icon the playback speed changes in the following sequence 2x 4x 8x 32x 1x Forward playback Press the PP icon during video CD playback for high speed playback in the forward direction When you press the PP icon the playback speed changes in the following sequence 2x 4x 8x 32x 1x Forward playback 132 Plays from the beg
35. e to replace both of them with new ones Do not heat up batteries or take them apart Do not expose batteries to fire or flames Remove the batteries from the remote controller when not in use for an extended period of time Do not take batteries apart and throw them at persons or animals Dispose of used batteries properly TO E QWA ENG 4 2005 6 13 2 46 PM HO 19 a Using radio Selecting radio 1 Press the POWER SOURCE button on the main unit or the remote controller or press the source icon on the LCD panel to select radio 2 When you press the BAND button on the main unit the BAND DISC button on the remote controller or the BAND icon on the LCD panel the frequency band will switch between the following FM1 gt FM2 FM3 AM1 MW AM2 LW Screen configuration eeeqeaeod Displays the active source Press the icon to switch to the next source Displays the active frequency band Press the icon to switch between frequency bands FM1 FM2 FM3 AM1 MW and AN2 LW Displays the active station s frequency Press the icon to display the frequency input screen For more information on how to set the frequency see Frequency setup on page 20 Displays the preset number if a station is saved to the preset Each time you press the icon you will move to the station saved to the next preset number 5 Press to display or not display the PTY information
36. e track to play Press to delete the number entered 3 Press to set the track entered Press to return to the previous screen without selling 2 a track Note if no matching track i is found ithe panel will return to the previous screen without without setting atrack 9 a MP3 disc playback When the source is MP3 tap on the LCD panel to display a screen where you can contro the functions of the MP3 player Screen configuration 0 I iya za amtoe pian a REPEAT FOLDER 00 0 Displays the active source Press the icon to switch to the next source Displays the number of the track that is being played Press the icon to display the track input screen For more information on how to set up track see Track setup on page 30 Displays the current track s elapsed time Displays the disc playback mode Press the icon to switch between disc playback modes F RPT repeat plays all the tracks within the folder that is currently being played 29 1 9 C A ENG_1 2005 6 13 2 46 PM HO 3 30 RDM plays all the tracks within the folder that is being played in random order NOR plays all the tracks on the disc consecutively RPT repeat plays the track that is being played Press to display the MP3 setup screen where you can select folders or files For more information on how to set up MP3 see MP3 setup screen on page 31 6
37. eas for example inside a tunnel or in the basement of a building You may experience poor picture quality or noise in such areas for example inside a tunnel or in the basement of a building e You may experience poor picture quality or noise as a result of external factors such as subway power lines high voltage power lines and signal equipment You may experience interference with wireless communication if a Playable discs DVD Video discs DVD Single or double sided discs VIDEO DVD video recorded on DVD R DVD RW DVD R or DVD RW discs the product is not installed or used according to the instructions in the user s manual Audio CD and MP3 files CD recorded on CD R CD RW discs Ka e You may experience interference with wireless communication if certain equipment is being used near the product e Do not clean the product with chemicals such as benzene thinners or acetone Doing so could the paint to peel or wise ose aise damage the product WISE e Make sure the disc insertion slot is not blocked VCD Dolby Digital ISG DO bos DIGITAL a TV color system The DVD player can play discs of NTSC or PAL type only It cannot play SECAM discs 5 Ea 2 9 E OHA ENG 1 2005 6 13 2 46 PM 9 416 DVD Region code The DVD video system assigns a region number to DVD video players and DVD discs according to the region where they are sold For example DVD video players sold in the Unit
38. ed States can only play discs with the correct region number 1 ALL or any combination of numbers including 1 The DVD region number is indicated on the disc jacket as shown below For more information on the region code by country refer to the user s manual that comes with DVD titles m Handling discs e Do not use discs with rough edges Using such discs could cause the product to malfunction ar be damaged e Do not attach labels to the disc surface or mark it with a pencil or pen Doing so could cause the product to malfunction or be damaged Do not use discs if they have scotch tape or other adhesive materials or traces of such material on them Using such discs could cause the product to malfunction ar be damaged e Do not use discs that are badly scratched deformed or cracked Using such discs could cause the product to malfunction or be damaged e Do not use commercially available CD protectors or disc stabilizers Doing so could cause the product to malfunction or be damaged Do not touch the disc surface when inserting or removing the disc Cleaning discs e Use a soft cloth to wipe the disc from the center out towards the circumference Do not use commercially available cleaners or static proof sprays or thinners on the disc Doing so could damage the disc m Storing discs e Do not keep discs in places where it is too hot or cold Doing so could deform them Using deformed discs co
39. een Wed Rt N MAIN SOUND DVD ETE ZONE displays AV3 hae MONITOR Select whether or not to retain the LCD panel s current position if the car engine stops CVBS ON gt f AV2 MODE REAR CAM ON Set rear camera as external input CAM will be displayed on the Extern screen REAR CAM OFF Set AV2 input as extemal input AV2 will be displayed on the Extern screen MIRROR ON Mirror images of AV2 or REAR CAM will be displayed ON The LCD panel will be automatically closed if the car engine MIRROR OFF Original AV2 or REAR CAM images will be stops if the key is in a position other than ACC displayed OFF The LCD panel will retain the current position if the car engine stops if the key is in a position other than ACC AV3 MODE For information about NAVI installation see Installing Car Navigation on page 58 154 z E OHA ENG 1 2005 6 13 2 46 PM 7155 RDS Set up RDS related features TA MODE TA SEEK Automatically scan TP stations if the TA feature is enabled TA ALARM Alarm with beep and message if the selected station is anon TP station TA MINIMUM VOLUME If you set the minimum level for audio volume the driver can be alerted when traffic information is received If the volume before traffic information is received is less than the minimum level set the volume will be automatically increased to the minimum level Once traffic informati
40. el e When adjusting the tilt of the LCD panel make sure nothing is jammed between the LCD panel and the main unit to avoid damaging the product e Do not expose the remote controller to direct sunlight Doing so could cause the remote controller to malfunction e Do not press too hard on the casing surrounding the touch panel Doing so could cause the product to malfunction or be damaged e f you turn on the heater when the temperature inside the vehicle is low wait for a while before starting to use the product Otherwise ice could appear on the disc surface or the optical lens causing the product to malfunction or be damaged e Do not use the product in too cold an environment Doing so could cause the LCD panel to temporarily slow down or pause or become dark e If moisture appears on the disc surface dry the surface with a soft cloth before using e if ice appears on the optical lens be sure to dry the lens betore using e Do not look directly into the disc insertion slot as the laser from the optical lens could damage your eyesight e Do not use this product while driving on unpaved roads that generate severe vibration Doing so could cause the product to malfunction or damage the optical lens Do not apply lubricants to the rotating partst of the product Doing so could cause the unit to malfunction or be damaged e You may experience poor TV picture quality or noise in certain ar
41. en the LCD panel is closed 1 Press the 44 or the PP button on the main unit to select the desired channel 2 If channels are saved to presets press one of the number buttons 1 6 on the main unit or the remote controller When the LCD panel is open and the source is TV press the CHANNEL icon to display the setup screen 23 THQI WAL ENG_1 2005 6 13 2 46 PM 7 24 Press to enter the desired channel Press to delete the number entered Press to set the channel entered Press to retum to the previous screen without setting a channel When the numeric input window appears enter a valid frequency and press and hold PRESET The frequency entered will be saved to the current PRESET number The frequency entered will not be saved if it is not a valid one or if there is no PRESET number available Note if ho tts channel is found e LLCO role retums to the previous Screen without Setting achannel Fe 24 TV setup screen When the source is TV press the Setup icon to display the screen Press to retum to the previous screen without setting a channel Press to switch between TV bands Press to display the channel input screen Press to change the preset number Displays the status of preset scan and auto save Press the desired channel on the LCD panel to move directly to that preset channel To manually save a certain channel num
42. hen the DVO Video output format is changed PBC Select whether or not to use the PBC Playback Control menu during video CD piayback Note Applicable only when VCD 2 0 is used Audio Set the audio language Hf the disc is dubbed with multiple languages the output audio will be in the selected language Subtitle Set the language for subtitles if the disc that is being played has subtitles in the selected language subtitles will be displayed in that language Disc Menu Set the language for the DVD disc menu Parental Limit viewing by rating This feature is similar to movie ratings The parental feature is available for DVD discs with ratings Note This feature is applied if a password is enabled mQ E Wa ENG 1 2005 6 13 2 46 PM 7151 oe Default Password Mode Reset DVD settings to the ey settings Determine whether or not to use a password Note The password settings parental rating and region code i remain unchanged RTN MAIN SOUND DVO ETC Password Password is used if Parental in Preference setup is enabled RTN MAIN SOUND DVD ETC e Password Set or change the password RTN MAIN SOUND DYD 51 njoi Cj OHA ENG 1 2005 6 13 2 46 PM 1j 4 52 p Enter the old 4 digit password in the Old Password text box may look different depending on the model Enter the new 4 digit password in the New Password text box Model that supports
43. in AUDIO button DVD Press the button to change audio playback methods Radio FM Press the button to display the PTY search menu Use the up down buttons and the ENT button to search PTY Note i The AF TA REG and PTY Tave are available for ROS 19 EJ QWAL ENG 1 2005 6 13 2 46 PM op 7 15 e Powering on off Use the product while the engine is running Using the product for an extended period of time with Caution the engine off could lead to vehicle battery discharge and prevent the vehicle from being started When you start the engine the product will return to the state immediately before the engine was stopped 1 Press the POWER SOURCE button The main unit and the initial screen will be lit up The main unit remembers and runs the last source and setings Note you power ofthe unt wih a DVD dec int ad power f back on Jater the DYD disc will automatically play from where it left off 2 Press and hold the POWER SOURCE button for one second or longer to power the unit off Note 2 as The buttons remain fit if night lighting humination i is slogo p wori E E AA Selecting the source 1 Press the POWER SOURCE button to change sources The sources will change in the following sequence Radio TV DVD CD changer EXTERN Note _ You can switch to CD changer only if you have one installed With the power off i insert a
44. inning of the current track if the current track has played for 10 seconds or longer Plays from the beginning of the previous track if the current track has played for less than 10 seconds Press to play from the beginning of the next track 2 TA will appear in models that support ROS V NAVI will appear only if you have installed a navigation system supported by this product selected NAVI ON and set NAVI VOICE to ON in SETUP ETC Note AA For how to set up NAVI VOIGE see NAVI VOICE on page 44 Track setup When the source is video CD press the TRACK icon to display the screen ALO E WA ENG 1 2005 6 13 2 46 PM Ho 7 33 o Press to enter the number for the track to play Press to return to the previous screen 2 Press to delete the number entered Press to move the cursor position Press to set the track entered Press to select the item where the cursor is located Press to retum to the previous screen without setting a track ET Note gt The GOTO meni may appear different Senna on the VCD and the product version The GOTO menu allows you to use the a lv 4 gt ENTER icons to view Si chango ems a as needed Note If no matching track is found the panel will return to the previous screen without setting a track VCD setup screen oe Using CD changer When the source is VCD press the Setup icon and then the GOTO i
45. ion RGB Caution icon on ihe NAVI screen ie select a aferon AUDIO source signals and stereo audio You can listen to the navigation system s audio only when it you do this you can listen to another audio source by pressing the AUDIO source on the NAVI screen is NAVI AUDIO in the NAVI screen When audio output is from the navigation system you can hear f NAVI audio from the front L R speakers When Connecting to a Navigation System Not Supported by the Product Most CAR navigation systems use coaxial es to connect AGB signals and mono audio or CVBS and mono audio In this case If you set ETC EXTERN AVS MODE in SETUP to NAVI ON tho AVS wili be replaced by the NAVI icon as the extemal source You can use the NAVI button See page 11 to switch Instanty from other sources to the NAVI source In the NAV source screen the AUDIO source is set as follows When you use the Source bution of the Source icon on the Screen to switch to the NAVI Source the NAVI screen and NAVI AUDIO source wilt be set Once you switch to the NAVI lt Source the INAV button will no longer work To Switch sources press the NAVI source iconon the screen or press the POWER SOURCE button _ When you press the NAVI button to directly switch to the NAVI screen if the source is not NAVI the NAVI Screen ga the ne previous AUDIO Source will be set a Pressing the NAVI button again will take
46. mber entered Press to set the track entered Press to retum to the previous screen without setting track 2 c WA ENG 1 2005 6 13 2 46 PM 7 34 yr EERE G x press the Enter icon to play all the tracks beginning from the Note z selected track lf no matching track is found the panel will return to the Note 7 previous screen without setting a track i a p Ifthe number erated is greater than the number of tacks the previous track will repeat playing MP3 setup screen u Video CD playback When the source is video CD tap on the LCD panel to display a screen where you can control the functions of the video CD player Screen Configuration When the source is MP3 press the Setup icon to display the screen Press to return to the previous screen The blue cursor indicates the MP3 file that is being played Press to move the cursor up and down Press to move the cursor page up down Q Press to enter the folder or play the file where the cursor is located Displays the active source Press the icon to switch to the next Press to display the numeric input window Enter a number and source 31 Sa n Q E WA ENG_1 2005 6 13 2 46 PM Ho 32 Displays the number of the track that is being played Press the icon to display the track input screen For more information on how to set up track see Track setup on page 32 Displays th
47. ng played Press the icon to display the title input screen For more information on how to set up title see Title chapter setup on page 27 Displays the number of the chapter that is being played Press the icon to display the chapter input screen For more information on how to set up chapter see Title chapter setup on page 27 Displays the playback time information Press the icon to switch between playback time display modes TITL ELAPSE the current title s elapsed time TITL REMAIN the current title s remaining time CHAP ELAPSE the current chapter s elapsed time CHAP REMAIN the current chapter s remaining time 9 Displays the disc playback mode Press the icon to switch 26 a between disc playback modes D RPT repeat plays all the titles on the disc RDM plays all the titles on the disc in random order NOR plays consecutively from the chapter that is being played RPT repeat plays the chapter or title that is being played Press to display the DVD setup screen For more information on how to set up DVD see DVD setup screen on page 27 Press to switch between play pause modes Press to stop playing When it is stopped press the PII icon to resume playing from where it stopped Press the W icon twice in succession and then press the PI icon to play from the beginning Press the PP icon during DVD playback for high speed playback in the reverse dire
48. ng the display status When the LCD panel is closed the display shows you the source and operating status of the main unit Press the DISP button to view the current source operating status and the current time x The RDS information is also displayed in RDS supported models Opening Closing the LCD panel A When the LCD is in operation be careful not to get your hand or fingers caught between the panel and the main unit or the dashboard Do not force the LCD panel to move Doing so could damage the product Caution Press the OPEN button The LCD panel will be automatically extended and aligned to the last used position Ty 9 E OFM ENG 1 2005 6 13 2 46 PM 9 717 Note If the LCD panel stops moving or makes jammed sounds during operation press the OPEN button again to place the pane back into its original position Then OPEN button again Adjusting the angle of the LCD panel The angle of the LCD panel is adjustable Press the TILT button With the beep sound the LCD panel can be adjusted up to 10 degrees forwards or backwards 20 degrees in total When you open the LCD panel again it will open to the last adjusted angle Do not force the LCD A panel to move Doing so Caution could damage the product a Adjusting the extension distance of the LCD panel The extendable distance of the LCD panel can be adjusted Press and hold the
49. nit General setup Wed RIN MAIN SOUND DVD ETC Tomoye the oursor in DVD ras use the direction Nae icons oni the LCD panel or the direction buttons on th remote controller To select the menu press the ENTER icon on the LCD panel or the ENT button on the remote controller TV Display Adjust the aspect ratio of the TV screen NORMAL PS Select to display the full screen In some cases the left and right sides of the picture may be cut off from the screen 45 TOC ONK ENG 1 2005 6 13 2 46 PM 246 NORMALNE Select to retain the original aspect ratio In some cases black stripes may appear on the top and bottom of the screen DE Select if you use a wide format monitor Note if you us an external monitor tor viewing the same w display setting will apply e Angle Mark ON Select to display the camera angle information on the screen during disc playback OFF Select not to display the camera angle information on the screen during disc playback Note This feature applies eye when using DVD COs pecoroea with mutt angle views OSD Lang ENG English is selected as the OSD language for the DVD setup screen e CHN Chinese is selected as the OSD language for the DVD setup screen Note i The oso language sot here is nied to the DVO playback screen only not to the main oso of the product Captions lt ON C
50. o reset to the aoe settings press the Pete icon EQ SELECT Set up EQ Equalizer It you set up EQ the EQ mark wi tbe displayed atthe bottom of the Case and in the information display window Three default settings are POP CLASSIC and ROCK User defined EQ settings may also be saved for three user modes n g E GHA ENG 1 2005 6 13 2 46 PM H 743 WIRI MAIN SOUND DVD ETC ZONE TENI Gam Note T nie For more information on user modes see MY EQ on page 43 POP EQ settings suitable for pop music CLASSIC EQ settings suitable for classic music ROCK EQ settings suitable for rock music USER 1 2 3 EQ settings to user preference Set up and save user defined settings in MY EQ DEFEAT Press if you don t want to use EQ and the EQ mark will disappear from the bottom of the screen and the information display window MY EQ Set up EQ to your preference MAIN SOUND DVD ETC yi GROOFFSET Set value for each of three frequency regions BASS MID and TRE Each region can have 15 steps ranging from 7 to 7 BASS Press the BASS icon and then press the a or a icons to adjust value MID Press the MID icon and then press the a or W icons to adjust value TRE Press the TRE icon and then press the A or Y icons to adjust value Once you finish setting press or to save the settings to the selected n
51. oblem persists contact the correctly Service Center The touch The touch screen is Press and hold the S An incorrect button or Press the correct button or pi 3 icon has been pressed i panel does incorrectly aligned MENU button for 2 Input Invalid on not work Yy alig seconds or longer in the A playback command that Press the correct button or correctly Pea Naongea is not supported in the icon i i i Play Back Only current ms de has been instructions to adjust the pressed touch screen 162 p TA c a ENG 2 2005 6 13 2 50 PM 7 63 DA probem cae Aa The batteries are dead Replace the batteries of the remote controller Maintain the correct angle Something is stuck in the disc insertion slot T The remote or distance between the 2 controller The remote unit and the remote a does not controller has controller Make sure that work been used there are no obstructions incorrectly between the unit and the remote controller Press the desired button properly The disc is Insert the disc with the inserted the wrong label up side up The disc does not play or The disc is dirty Clean the disc skips or generates The disc is badly Replace the disc with one Ae leak scratched or bent in good condition 2 aie rae T E The disc has dew Dry the disc before using 2 on it it is ao 8 There is already Remove the existing disc another disc in the before in
52. old the button when the source is radio or TV and stations channels wili be automatically scanned and saved to presets Press the button to play pause the CD DVD CD changer Press and hold it to stop playback 144 button Radio TV Press to go to the previous station channel CD CD changer Press to go to the previous track CD DVD Press to go to the previous track chapter When the button is being pressed the reverse high playback speed changes in the following sequence 2x 4x Bx 32x O PP button Radio TV Press to go to the next station channel CD DVD Press to go to the next track chapter When the button is being pressed the reverse high playback speed changes in the following sequence 2x 4x 8x 32x Q PRESET button 1 6 Press to switch between preset stations When the source is radio or TV press and hold the preset button to save the current station to the preset button s number Remote controller s receiver Receives signals from the remote controller Note The location of the remote controller receiver may vary depending on the product model RELEASE button Available in some models Press to remove the front panel from the main unit to protect against theft 9 TPO Ef CHA ENG 1 2005 6 13 2 46 PM MH 7110 a When the LCD panel is opened 00000 VOL button Press to adjust the volume DISPLAY button
53. on is received the volume will retum to the previous level ZONE setup Press and hold the SETUP button on the main unit for one second or longer and then press the ZONE tab ZONE setup allows you to determine Extern output source ZONE ON OFF SINGLE ZONE The front source i e the source you are currently viewing is sent to external A V output e MULTIZONE The rear source set in ZONE SET is sent to external A V output 55 njee Wa ENG 2 2005 6 13 2 50 PM 7 56 o ZONE SET WI RTN MAIN SOUND DVD ETC ZONE WA RTN MAIN SOUND DVD ETC GONE ON OFF h a z3 e a FRONT SRC encore n Sres SPEAKER M mo Ea j i FRONT REAR REAR SRC Determine external A V output source SPEAKER Set the audio output source that is produced by the DVD Set DVD as external output speaker TV Set TV as external output FRONT SRC Set the front rear speakers to produce FRONT RADIO Set RADIO as external output source audio AVI Set AV1 as external output REAR SRC Set the front rear speakers to produce REAR source AV2 Set AV2 as external output audio AV3 Set AV3 as external output FRONT REAR Set the front speaker to produce FRONT source E audio and the rear speaker REAR source audio Note az j Ifyou set ETC EXTERN AV3 MODE in SETUP to NAVI ON the AV3 icon will be replaced by the NAVI icon as th external source Sp rt om 156
54. on to resume playing from where it stopped Press the 44 icon during CD changer playback for high speed playback in the reverse direction Each time you press the 44 icon the playback speed changes 9 Press the PP icon during CD changer playback for high speed playback in the forward direction Each time you press the pP icon the playback speed changes Plays from the beginning of the current track if the current track has played for 10 seconds or longer Plays from the beginning of the previous track if the current track has played for less than 10 seconds Press to play from the beginning of the next track Press to go to the previous disc in the CD changer Q Press to go to the next disc in the CD changer TA will appear in models that support RDS V NAVI will appear only if you have installed a navigation system supported by this product selected NAVI ON and set NAVI VOICE to ON in SETUP ETC Note E For how to set up NAVI VOICE see NAVI VOICE on page 44 Dto E QHAL ENG 1 2005 6 13 2 46 PM 4 4 35 CD changer track setup When the source is CD changer press the DISC or TRACK icon to display the following screen 3 Press to enter the disc or track to play Press to delete the number entered Press to set the disc or track entered Press to return to the previous screen without setting disc or track Note 4 ME 9 da lf no matching track or di
55. output in PCM 2 channel format Manual Select to set digital output manually Note CD Dolby Digital DTS MPEG and LPCM ia Sh ae are activated only if SPDIF Output i is set to Manual CD Select for digital output of CD sound Dolby Digital Select for digital output of sound recorded in Dolby Digital DTS Select for digital output of sound recorded in DTS MPEG Select for digital output of sound recorded in MPEG LPCM Select for digital output of sound recorded in LPCM Select either 48K or 96K bit rate A 96K should be used for the bit rate because audio output Caution ay not be produced properly with 48K 148 ma A jf CD Dolby Digital DTS MPEG or LPCM is set to Off in SPDI audio output may not be produced properly during disc playback If SPDIF Output is set to SPDIF Off audio output may not be produced during disc playback Caution e Dolby Digital Setup Dual Mono Select in which way to output Dolby Digital audio as mono sound Stereo Select for stereo output L Mono Output only the left sound through the left right speakers R Mono Output only the right sound through the left right speakers e Mix Mono Combine and output the left and right sounds through the left right speakers e Channel Delay Set delay time by channel according to the speaker type and location Seleci the speaker and delay time by pressing the up do
56. own from the current volume ON Voice navigation information service is supported OFF Voice navigation information service is not supported T E QHAL ENG_1 2005 6 13 2 46 PM 2145 Note You can tum on or off the NAVI VOICE feature by pressing and holding the NAVI button on the monitor only if a navigation System supplied by this product is installed i V NAVI at the bottom of the LCD panel will be displayed only if navigation system supported by this product is installed and AV3 MODE in SETUP ETC EXTERN is Set to NAVI ON and NAVI VOICE to ON DVD setup Press and hold the SETUP button on the main unit for one second or longer and then press the DVD tab A Before you can use the PREFERENCE menu you must Caution Press the STOP button twice to stop the disc completely DVD menu GENERAL Set up general DVD settings AUDIO Set up DVD sound VIDEO Sets up DVD video PREFERENCE Set up DVD options PASSWORD Set up password EXIT Exit the setup To move the cursorin DVD Take ise the direction on awry icons on the LCD panel or the direction A w 4 gt buttons on the remote controller To select the mefiu press the ENTER icon on the LCD panel or the ENT button on the remot controller A i You can change DVD settings only if DVD is selected as Caution Source and a DVD disc is placed in the u
57. put of the front speaker E A a Large Set the front speaker to produce a large output Subwooter Small Set the front speaker to produce a small output lt On Set the subwoofer to produce output Center Speaker Off Set the subwoofer to produce no output Select if there is Set up output of the center speaker no subwoofer installed Large Set the center speaker to produce a large output Small Set the center speaker to produce a small output SPDIF setup Off Set the center speaker to produce no output Make sure To play DVD audio with an external audio player that uses that Off is selected if no center speaker is installed SPDIF select SPDIF audio signal output SPDIF Output SPDIF OFF Select to suspend SPDIF audio signal output SPDIF RAW Select for direct output of Dolby Digital or DTS bitstream Select when the external audio player is enabled with Dolby Digita decoding SPDIF PCM Select for output of decoded Dolby Digital or DTS bitsream Select when the extemal audio player uses a 2 channel digital stereo amplifier DVD video discs recorded Note gt ee ae T tk You can sel ct the center speaker only if downmixis set to OH JN If you have set 5 1 channel and installed no center 7 speaker be sure to set it to Off Otherwise no sound can Caution pe produced 47 a Q E HAL ENG 1 2005 6 13 2 46 PM H 4 48 in Dolby Digital MPEG1 or MPEG2 will be
58. reen Press to move the cursor position Press to select the item where the cursor is located 5 Press to move to the GOTO menu lt The root menu screen and the GOTO menu may pape different depending on aver et a A menu usethe view or change items as TADEN EIK icons 27 a c QHA ENG 1 2005 6 13 2 46 PM 7 28 Audio CD Playing When the source is audio CD tap on the LCD panel to display a screen where you can control the functions of the audio CD player Screen configuration Displays the active source Press the icon to switch to the next source Displays the number of the track that is being played Press the icon to display the track input screen For more information on how to set up track see Track setup on page 29 Displays the playback time information Press the icon to switch between playback time display modes SNGL ELAPSE the current track s elapsed time SNGL REMAIN the current track s remaining time TOTL ELAPSE the disc s total elapsed time 128 TOTL REMAIN the disc s total remaining time Displays the disc playback mode Press the icon to switch between disc playback modes D RPT repeat plays all the tracks on the disc RDM plays all the tracks on the disc in random order NOR plays all the tracks consecutively RPT repeat plays the track that is being played 8
59. sc is found the pel will return to the Previous screen n without setting a track or disc 5 ms a Using external input When the source is external input tap on the LCD panel to display a screen where you control the functions of the extemal input Screen configuration C TA VNAV LOUD ROCK OZO Displays the active source Press the icon to switch to the next source Displays the name of the external input that is being played Press the icon to switch to the next external input AV1 input Stereo Audio and CVBS Video signals 35 3 Q E WA ENG 1 2005 6 13 2 46 PM MY 3 36 e AV2 this is a terminal that connects to the rear camera You can only input CVBS signals You cannot input audio signals If you set ETC EXTERN AV2 MODE in SETUP to REAR CAM ON CAM not AV2 is displayed When the car is reversing the rear camera input will be automatically detected and displayed on the CAM source screen AV3 input RGB or CVBS Video and Mono Audio signals If you use 13 pin NAVI cables you can input stereo audio signals instead of mono audio signals If you set ETC EXTERN AV3 MODE in SETUP to NAVI ON the AV3 icon will be replaced by the NAVI icon as the external source The rear camera picture may not exactly reflect reality Look around and make sure it is safe to reverse before Caution doing so Press to enable or disable the Mute feature If Mute is en
60. serting a new The disc unit one cannot be inserted Remove whatever is stuck in the disc insertion slot before inserting a disc es cawe IO Solmon correctly The disc A communication Press and hold the cannot be error has occurred 4EJECT button for one ejected second or longer to force the disc to eject It is set to monitor Press the NAVI button to off mode disable monitor off mode The handbrake is To view the TV DVD or E biel not engaged VCD screens engage the nothin g handbrake while the car is a stationary 5 S The handbrake Connect the unit s a cable is handbrake cable before disconnected engaging the handbrake The brightness In screen settings in the setting is too low main setup adjust the The screen BRIGHT value looks dark The temperature of Operate the unit again the unit is too low when at room temperature The volume is set Tum up the volume z too low 5 No sound is The speaker cable Connect the speaker cable 3 heard is not connected correctly o gt it is set to Mute mode Check to see if it is in Mute mode 63 zQ E ORAL ENG 2 2005 6 13 2 50 PM 7 64 PT retin couse sation A in the DVD settings In the audio setup for MP3 files do The disc storage Make sure that the disc the speaker is setto DVD change the setting to not play
61. st brightness Note To reset to the factory settings press the Default icon A if DIMMER is set to AUTO during nighttime driving the brightness of the LCD panel may be affected by Caution headlights from cars behind and change constantly BEEP VOLUME gt Set up the beep sound and the maximum volume ARTN MAIN SOUND DVD ETC BEEP SOUND Turn the beep sound that is heard when pressing the touch panel on or off ON Beep is heard OFF No beep is heard e MAXIMUM VOLUME Set the maximum volume When the unit is tumed on the maximum volume setting is compared with the volume when the unit was last turned off if the latter is greater than the former the former will take effect and vice versa The maximum volume lt The volume when the unit was tumed off The maximum volume The maximum volume gt The volume when the unit was tumed off The volume when the unit was tumed off Caution the maximum volume to a modest level A When you use the unit for the first time be sure to set CLOCK Set up screen display synchronization 12H 24H time modes and the current time TIME DISPLAY Set time display ON Time is displayed on the screen OFF Time is not displayed on the screen 39 PQ E OHM ENG 1 2005 6 13 2 46 PM 2140 Caution Setting this feature to ON may not immediately 140 e SYNC Synchronize with the broadcasting time provided in R
62. the LCD panel is open press the FREQ icon on the panel to display the numeric input pad 120 ENTER CANCEL Press to enter the numbers for the desired frequency 2 Press to delete the number entered Press to set the frequency entered Press to return to the previous screen without setting a frequency 5 When the numeric input window appears enter a valid frequency and press and hold PRESET The frequency entered will be saved to the current PRESET number The frequency entered will not be saved if it is not a valid one or if there is no PRESET number available Note l ss 7 Hio manati vera ig found the panet wit retum to 1 the F previous screen without setting a frequency ara C HAJ ENG_ 4 2005 6 13 2 46 PM WF aj 24 Radio setup screen When the source is radio press the Setup icon to display the screen 4 1 875 Miz PRESET 2 90 0 MHz AUTO SAVE 3 900 MHz 4 106 0 MHz 5 108 0 MHz 6 875 MHz Note icons are not displayed in models tt do not sunt he H RDS feature Press to retum to the previous screen 2 Press to switch between frequency bands 3 Press to display the frequency input screen Press to change the preset number Displays the status of preset scan and auto save Press the desired frequency on the LCD panel to move directly to that preset frequency To manually save a certain frequency to a preset press
63. to decrease the frequency by one step How to set up presets When the LCD panel is closed 1 When the source is radio press and hold the p gt 1 M button to automatically save the six stations frequencies with the best reception conditions to preset memory 2 Press the P gt I m button to automatically scan the saved preset memory When the LCD panel is open 1 See the descriptions in Radio setup screen on page 21 PTY setup 122 When the source is radio press the PTY icon to display the following screen Select and press the desired PTY Displays the PTY of the found frequency Not found will be displayed if no matching PTY is found Press to go to the previous page Press to search for the frequencies of stations that match the selected PTY 5 Press to go to the next page Note The PTY feature is only applied to E that support RDS There are a total of 29 PTYs available for selection and they ate fisted on three pages For more information on Pixie PTY List on page 74 Using TV Only applied to models that support a TV tuner Selecting TV 1 Press the POWER SOURCE button on the main unit or the remote controller or the source icon on the LCD panel to select TV 2 Each time you press the BAND button on the main unit the BAND DISC button on the remote controller or the BAND icon on the LCD panel the TV band will switch between TV1 and TV2 ME
64. ton Press to play the first 10 seconds of each DVD CD disc chapter track Use this button to search for the desired portion or track MP3 discs do not support this feature SLOW button Press to play the DVD disc at a slow speed Forward Normal Stow 2x Slow 4x Slow 8x Slow 16x Reverse Normal Slow 2x Slow 4x Slow 8x Slow 16x TITLE button DVD Press the button to go to the title menu Radio FM Press the button to enable or disable the AF feature SUB T button DVD Press the button to change chapters Radio Press the button to enable or disable the TA feature For any other source press and hold the button to enable or disable the TA feature G ANGLE button Press the button to switch angles while playing DVD discs Radio FM Press the button to enable or disable the REG feature 114 o PRES SREY EN ne ee A MENU button e Press the button during DVD video playback to display the root menu Press and hold the button during DVD video playback to display the title menu When the menu is displayed press the button to make it disappear NAVI button Functions the same as the NAVI button on the LCD panel DISP button Press to change display modes while playing DVD discs DVD Video Total Elapse Total Remain Chapter Elapse gt Chapter Remain Display Off VCD CD Single Elapse Single Remain Total Elapse gt Total Rema
65. ton Pressing it will automatically activate the scanning of saved preset channels When the source is CD DVD CD changer press the button to play pause Press and hold the button to stop playback When the source is radio or TV press and hold the button and stations channels will be automatically scanned and saved to presets SOUND button Press to go to the sound setup in system setup Press and hold the button to enable or disable the loud setting SETUP button Press and hold it to switch to the system setup screen NAVI button Press and release the NAVI button to enter NAV mode Press and release it again to exit NAVI mode Press and hold the NAVI button to temporarily disable voice navigation information service only applied to navigation models supported by this Product For more information see page 44 WHOIS Fee aa To enable the NAVI button be sure to set NAVI to On in the system s tup bs a a re 49 MENU button Press the button during DVD video playback to display the root menu Press and hold the button during DVD video playback to display the title menu Press and hold in the SETUP screen to display the LCD touch control screen TILT button This button allows you to change the angle of the LCD panet Press and hold the button to adjust how far the LCD panel is extended 111 e a Qt E WAL ENG_1 2005 6 13 2 46 PM M9 4 12 O
66. trim cover Make sure that all the hooks are secured 69 THQ E OHA ENG 2 2005 6 13 2 50 PM 270 D Installing the tuner amp unit Method 2 Installation using velcro 1 Stick the velcro tapes supplied to the bottom of the tuner amp Method 1 Installation using brackets unit 2 Fix the tuner amp unit under the seat Note installation using velcro may not be possible on some car carpets 3 1 Use the screws M4X4 48 to fix the included mounting brackets on the tuner amp unit 2 Drill holes with a diameter of 3 5 mm aligning them with the bracket holes 3 Use the self tapping screws 42 to fix the tuner amp unit to the floor 170 a qi E gaaj ENG 2 2005 6 13 2 50 PM 7 71 Removing the main unit 1 Unscrew the rear of the main unit by following the instructions for Installing the main unit on page 69 in the reverse order 2 Remove the trim cover 3 Insert the split bar between the spring and the universal mounting bracket 4 Use the split bar to remove the main unit A Keep the split bar in a safe place The main unit cannot Caution Pe removed without it 711 njo Cj OMF ENG 2 2005 6 13 2 50 PM HIO 4 72 a System Connection LINN NOILYDIAYN OL Ld lao AY Macy pao WW Anant olan NOLLVSIAVN TAdLAG O1GNY TWLIDIG AZ1 YJMOd 1S008 AL YNNALNY AL OL 43500M 85 HI0 5 NON any HOL S vey a 7 any olgny e gt Da
67. tup Other setup ZONE Setup aa Adjusting touch sensitivity of the LCD panel Installing CAR Navigation DVD player error messages Troubleshooting Specifications Installation 66 System connection 72 Power connection A3 HAW I F Specifications of Car Navigation Supported Dy the Product sasana iea aS 75 DEOL E OWA ENG 1 2005 6 13 2 46 PM HO 7 4 e For your safety do not watch DVD or TV or operate the product while driving Doing so could lead to accidents In some countries or states watching DVD or TV while driving may be against law e For your safety do not set the volume too high Doing so could lead to accidents e Do not disassemble repair or modify the product Daing so could cause the product to malfunction or be damaged This could in turn void the warranty and violate FCC Rules e If you need to park the vehicle outdoors for an extended period of time make sure the panel is returned into the main unit Otherwise the panel could be damaged e Do not let beverages or umbrellas get the product wet Doing so could damage the product e Do not force the LCD panel out or place anything on the back of the LCD panel when it is exterided Doing so could damage the LCD panel Do not allow anything to impact the LCD panel Doing so could damage the LCD panel e Be careful not to touch the LCD panei with a lighted cigarette Doing so could damage the LCD pan
68. uld cause the product to malfunction or be damaged e Do not keep discs in places exposed to direct sunlight or close to heaters Doing so could deform the discs Using deformed discs could cause the product to malfunction or be damaged Do not keep discs in places that are too dusty or humid Using discs stored in such places could cause the product to maifunction or be damaged 19 E WAJ ENG 1 2005 6 13 2 46 PM HO 7 7 lt p a When the LCD panel is closed VOL button Press to adjust the volume DISPLAY button Press to switch between playback status and the clock on the display 7 2 Q E OHA ENG 1 2005 6 13 2 46 PM 1j 3 8 OPEN button Press to open or close the LCD panel A EJECT button Press to remove the disc MUTE button Press to mute the sound Press again to enable sound BAND button Press to switch between reception bands for radio TV external input source Radio FM1 FM2 FM3 gt AM1 MW AM2 LW TV Mode with a TV Tuner TV1 TV2 External input AVI AV2 CAMY 1 AV3 2 1 ETC EXTERN AV2 MODE in SETUP CAM is displayed when REAR CAM is ON 2 ETC EXTERN AV3 MODE in SETUP The NAVI source not AV3 is displayed in EXTERN BAND when NAVI is ON CD changer Go to the next disc When the source is radio or TV press and hold the BAND button to switch between AUTO and MANUAL channel search modes
69. umber e Select to save the settings to USER1 in EQ SELECT Select to save the settings to USER2 in EQ SELECT Select to save the settings to USERS in EQ SELECT 43 Die WA ENG 1 2005 6 13 2 46 PM 7 44 SRC OFFSET Sounds in different sources may have different volume level The frequency bands for BASS MID and TRE are as 8 foows Therefore you can adjust the initial settings for each source to BASS 100 Hz Mio KHz TRE 10 KHz The saved EQ settings are poy Avalan in EQ SELECT ensure an appropriate volume level when selecting a source After each source is selected press the SOUND or SETUP buttons to set the SRC OFFSET value in the SOUND setup screen Sources available for set up are TV DVD CD and NAVI NAVI VOICE The NAVI VOICE icon will be generated in the SOUND SETUP window only if a navigation system supported by this product is installed and AV3 MODE in SETUP ETC EXTERN is set to NAVI AAIN SOUND DVD ETC SRC VOLUME OFFSET co DVD NAVI TN MAIN S9UND DVD ETC ZONE SACOFFSET Wai vo You can adjust SRC OFFSET settings only for the source selected immediately before entering the SRC OFFSET screen For example if you enter the SAC OFFSET screen while watching a DVD source you can adjust the DVD source s OFFSET settings as shown in the screen above NAVI VOICE feature OFFSET settings are adjustable by up to 7 steps up d
70. vel shows dots or interference not play stripes DVD pauses It is a dua layered It is normal for dual during disc layered discs to pause Playback during playback and resume 164 ape njoi C OHA ENG 2 2005 6 13 4 17 PM M9 4 65 m Specifications AM Tuner Receiving frequency range Monitor ji 7 A 530 KHz 1620 KHz 10 KHz Steps USA1 USA2 Sereen size 7 inch wide format 1 54 08mm W X 86 58mm H 530 KHz 1710 KHz 10 KHz Steps USA3 Display method TFT active matrix LCD 522 KHz 1620 KHz 9 KHz Steps Europe Pixel count 336 960 1 440 W X 234 H 522 KHz 1629 KHz 9 KHz Steps Japan Color system NTSC PAL SECAM 520 KHz 1620 KHz 5 KHz Steps Latin America 531 KHz 1602 KHz 9 KHz Steps Korea Australia DVD Driver Usable sensitivity 33dB or lower Playable discs DVD Video DVD Audio CD DA MP3 Video CD Frequency response sampling frequency 96KHz 20Hz 44KHz LW Tuner Distortion 0 3 or less 1KHz Receiving frequency range Signal to noise ratio 80dB 1KHz or higher IHF A 144 KHz 288 KHz 1 KHz Steps Europe Digital output format Dolby Digita DTS LPCM Usable sensitivity 33 dB or lower FM Tuner TV Tuner Receiving frequency range Color system NTSC PAL SECAM 87 5 MHz 108 0 MHz 50 KHz Steps Europe Receiving channels 87 5 MHz 108 0 MHz 100 KHz Steps VHF2 13 Ch UHF14 69 Ch PA2NF68X NTSC M USA1 Latin America Korea Australia VHF1 20 Ch UHF21 69 Ch PA2BF69X PAL B G 87
71. wn left right buttons and then press the Enter button to save the settings Note Setup methods vary depending on the wisn and the locations of the speakers installed 110 E OHM ENG 1 2005 6 13 2 46 PM 4 49 Equalizer EQ Type Enjoy 3D surround sound during DVD playback Supported preset EQ modes are Rock Pop Dance Techno Classic and Soft Bass Boost Select to boost base sound Super Bass Select to boost super base sound Treble Boost Select to boost treble sound 3D Processing Reverb Mode Select and enjoy the following reverb sound field effects Concert Living room Hall Bathroom Cave Arena and Church DVD Video setup 2 RTN COMPONENT Sets up screen output This setting is fixed to RGB in this product e TV MODE Sets up display method This setting is fixed to Interlace in this product e Quality Sets up the following items that correct DVD source video signals Sharpness Brightness Contrast Gamma HEU Saturation Luma Delay 49 nf c OHA ENG 1 2005 6 13 2 46 PM 1 7150 Preference setup WARN MAIN SOUND DVD A Before you can use the preference menu you must press Caution the STOP button twice to stop the disc completely 50 TV Type Set the DVD video output format PAL NTSC Note ee a pee a TENA E The screen may flash several times fora short period w

Download Pdf Manuals

Related Search

Related Contents

Descrizione per generatore modulare a condensazione  Manual de utilização  R&S®FSC Spectrum Analyzer Specifications    Benutzerhandbuch Kartuschenfilteranlage  AS Silencerオーナーズマニュアル [PDF：1.69MB]  Samsung MJC-500SF User Manual  PDFカタログはこちら  User Manual - Oli Larkin  Software`s User Manual  

Copyright © All rights reserved. Failed to retrieve file