Premier Mounts POLARIS MAG User's Manual
Contents
1. Installation Manual Page 7 MAG Warranty Limited Lifetime Warranty All Premier Mounts products carry a limited lifetime warranty from ship date against defects in materials and workmanship Premier Mounts is not liable for improper installation that results in damage to mounts adapters display equipment or personal injury Any modification to the existing mount will void the manufacturers warranty DISCLAIMER OF WARRANTY THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE Warning Statements WARNING PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY PREMIER MOUNTS PRODUCT FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY UNAUTHORIZED ATTACHMENTS OR MODIFICATIONS AND IS NOT RESPONSIBLE FOR ANY DAMAGES CLAIMS DEMANDS SUITS ACTIONS OR CAUSES OF ACTION OF WHATEVER KIND RESULTING FROM ARISING OUT OF OR IN ANY MANNER RELATING TO ANY SUCH USE ATTACHMENTS OR MODIFICATIONS WARNING THE CEILING STRUCTURE MUST BE CAPABLE OF SUPPORTING 25LBS IF NOT THE CEILING STRUCTURE MUST BE REINFORCED PROPER INSTALLATION PROCEDURE BY A QUALIFIED SERVICE TECHNICIAN AS OUTLINED IN THE INSTALLATION INSTRUCTIONS MUST BE ADHER2. B PREMIER 2 MOUNTS The original holding company INSTALLATION MANUAL Polaris Universal Projector Mount Model MAG Premier Mounts 3130 E Miraloma Avenue Anaheim CA 92806 U Phone 800 368 9700 Fax 800 832 4888 H L US mounts mounts com www mounts com 9530 001 011 07 MAG h Table of Contents Pa E e E E E E EE E E 3 A aA Naa R E E E E E EE TE E E E ec eseemce ae 3 PU re ero ci E EE E EE E EE E 4 Selecting the Proper Mounting Hardwate cccccccccccccccsssssseseccccceesaesseeecceeeessaaeesseeceeeeessaaeeseeseeseseeaaaaaseeeeeess 4 PCAC Ms INS LOU esate ch ccarsetcracaen E E N E 5 single Mounting Point Installation i 2 cncsscsssancsaesmscatadoneaenacincendsiuasenasmesmecateduneaiaciden EE nr aa EE O a ERa 5 eT T MOM a A E E E sees eee 6 Cone rie No ere e E E E E E E E 6 Adjus ne the PHOJCC ION a cacmrasancsacscsnacteuedongseatet prne EEEE EEES OE E NEEE EEEN 7 Toup Poonia FOC T SS ei E E E E E 7 PCC MCA ee a 7 W a E A E E E T E A 8 Warne eme e E a E E E N im edsundcecdoeee 8 Page 2 Installation Manual b 4 24 MAG Parts List NOTE This mount is shipped with all proper installation hardware and components Make sure that none of these parts are missing and or damaged before beginning installation If there are parts missing and or damaged please stop the installation and contact Premier Mounts 800 368 9700 NOTE Please review all WARNING an
3. Insert a concrete anchor into each hole If necessary a hammer can be used to lightly tap each anchor into place so that they are flush with the ceiling Once all of the anchors are in place move the ceiling plate back into position Attach the nut onto the threaded shaft that is protruding from the ceiling Do not tighten until all nuts are in place Page 6 Installation Manual b 4 vas MAG b Adjusting the Projector After the projector has been installed the projector must then be adjusted To adjust the projector 1 Loosen the M5 set screw using the M5 Allen wrench both sides 2 Adjust the projector to the correct position Firmly grasp the projector in both hands and tilt either forward or backward to adjust the level OR Firmly grasp the projector in both hands and rotate side to side for orientation adjustment 3 Tighten both M5 set screws using the M5 Allen wrench M4 x 12mm Security Screw and Star Washer M5 Set Screw Troubleshooting Procedures QUESTION My projector mount must be set at an angle to be viewed properly on the ceiling but the projector will not hold at this position Why is this ANSWER The angle adjustments are not tight they must be tightened QUESTION What happens if the universal legs don t fit my projector ANSWER Contact Customer Service and advise them of the situation Technical Specifications All measurements are inches mm
4. 30 East Miraloma Avenue Swallow House P O Box 295 Anaheim CA 92806 USA Shilton Industrial Estate Mordialloc Victoria 3195 USA and Canada Shilton Coventry England CV79JY Australia Phone 800 368 9700 Phone 44 0 2476 614700 Phone 039586 6330 Fax 800 832 4888 Fax 44 0 2476 614710 Www premiermounts com au Other Locations Phone 001 714 632 7100 Fax 001 714 632 1044 Premier Mounts 2007 9530 001 01 1 07 Page 8 Installation Manual
5. ED TO FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY OR EVEN DEATH WARNING SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE INSTALLATION OF THIS PRODUCT USE PROPER SAFETY GEAR AND TOOLS FOR THE INSTALLATION PROCEDURE TO PREVENT PERSONAL INJURY WARNING PRIOR TO THE INSTALLATION OF THIS PRODUCT THE INSTALLATION INSTRUCTIONS SHOULD BE READ AND COMPLETELY UNDERSTOOD THE INSTALLATION INSTRUCTIONS MUST BE READ TO PREVENT PERSONAL INJURY AND PROPERTY DAMAGE KEEP THESE INSTALLATION INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION FOR FUTURE REFERENCE Indicates that the power plug is to be disconnected from the Contact Premier Mounts with any questions power outlet N Customer Service 800 368 9700 Technical Support techsupport mounts com Safety precautions must be taken at all times Warning and Caution statements Do not install on a structure that is prone to vibration movement or chance of impact Failure to do so could result in damage to the projector and or damage to the mounting surface Do not install near heater fireplace direct sunlight air conditioning or any other source of direct heat energy Failure to do so may result in damage to the projector and could increase the risk of fire A qualified person should perform the installation procedure Injury and or damage can result from dropping or mishandling the projector AUSTRALIA NEW ZEALAND OCEANIA NORTH AMERICA EUROPE DISTRIBUTOR 31
6. bly Projector Plate M6 Square Nut Locking Tab Magnets Radial Glide Set Screw Mounting Leg ONO mi TAQAT O ZZO Selecting the Proper Mounting Hardware 1 Invert the projector and locate the mounting points 2 Test each size of the screws provided 3 The correct screws should thread easily into the mounting point and not pull out when pressure is applied WARNING DO NOT OVERTIGHTEN YOUR MOUNTING SCREWS TO THE PROJECTOR CHASIS USING THE INCORRECT SCREW DEPTH MAY CAUSE DAMAGE TO YOUR PROJECTOR Page 4 Installation Manual Attaching the Mount MAG Unpack the MAG Mount and review any WARNING statements that apply to the installation Select the desired location for the MAG Mount ext 1 Locate the mounting points on the bottom of the projector 2 see arrows above for mounting point recognition NOTE Projector mounting points will vary The projector used in this manual is an example and may not match 3 yours exactly 4 Align the projector plate to the mounting legs 6 5 Position the legs accordingly for best configuration You may raise or lower each leg independently by turning the leveling barrels 7 8 Single Mounting Point Installation Mounting Point Ji EO T If your projector has a 14 20 x 5 16 mounting point please refer 2 to the following three steps 3 1 Determine where the mounting point is located Installation Manual ae Sn
7. d CAUTION statements see Page 8 before beginning the installation of the MAG Mount MAG Mount 7 F Se Se Mounting Legs M6 x 12mm M3 Flat Washers Security Screw Qty 8 Qty 4 M5 x 12mm Security Screw Qty 4 M4 x 12mm M3 x 16mm Security Screw Security Screw Qty 6 Qty 4 1 4 20 x 5 16 M2 5 x 8mm Security Screw Security Screw Qty 1 Qty 4 14 X 2 Wood Screw Qty 3 M4 Star Washers a en Plastic Barrel Caps Qty 2 aaa Qty 4 Installation Tools Phillips Head Screw Driver Portable Drill Soft Material Blanket Pencil Tape Measure Stud Finder Commercially Available Ladder M5 Security Allen Wrench Supplied M3 Security Allen Wrench Supplied Masonry Bit Concrete Installation 1 8 Wood Drill Bit Ceiling Installation Commercially Available Commercially Available Installation Manual Page 3 b 4 MAG om Features Congratulations on the purchase of your new Premier Mounts Polaris Universal Projector Mount The projector mount can be configured for ceiling installations The Polaris features our exclusive MagnaGuide Technology which assists the installer for quicker installation times and peace of mind A Single Wooden Stud Mounting Points B Solid Structure Mounting Points Ceiling Plate M4 x 12mm Security Screw and Star Washer R MagnaGuide Upper S Assembly ey a Barrel Cap Leveling Barrel Mounting Hardware MagnaGuide Lower Assem
8. ia Attach the appropriate number of mounting legs to the projector using the appropriate mounting hardware see Page 4 Selecting the Proper Mounting Hardware Do not tighten these screws completely at this time Secure the legs to the projector plate by screwing M6 x 12mm security screws into the M6 square nut do not overtighten on the mounting legs Tighten all security screws at this time Once the security screws have been tightened place the plastic cap over each leveling barrel and firmly push the plastic cap into place 14 20 x 5 16 Mounting Screw Standard Hole a Place the projector plate over the mounting point Insert the 4 20 x 5 16 security screw NOTE This screw will use a standard hole when mounting Page 5 MAG Ceiling Installation L 2 Mounting Surfaces NOTE Use a 1 8 drill bit to pre drill the mounting holes before securing the wood screws supplied Wood studs Where denoted with the letter A mark these locations for wood stud installation NOTE Use a masonry bit to pre drill the mounting holes in the concrete surface Concrete surface Where denoted with the letter B mark these locations for concrete installation Use two 2 14 x 2 wood screws supplied to attach the ceiling plate to the wooden ceiling stud NOTE For extra security attach a third wood screw to the gt middle mounting point A Slowly raise the projector toward the u
9. pper assembly Once the projector is close to the upper assembly MagnaGuide Technology will pull the lower assembly into the upper assembly and the locking tab will engage WARNING THE MAGNETS ARE USED FOR GUIDING 4 THE UNIT ONLY PLEASE MAKE SURE THE TWO 2 M4 X 12MM SCREWS ARE USED TO SECURE THE PROJECTOR Attach the two 2 M4 x 12mm security screws and star washers that are located on each side of the locking tab NOTE Do not release your hold on the projector until the upper and lower assemblies are engaged and the locking tab is in place NOTE If you choose to use the center mounting point for added security detach the lower assembly from the ceiling plate by removing the two 2 M6 x 12mm security screws drive the wood screw in place and reattach the lower assembly and security screws Concrete Mounting NOTE AS A a M6 x 12mm Security Screw M5 Allen Wrench The MAG can be mounted to a ceiling with a minimum 6 thickness Concrete wedge anchors must be used for concrete installation It is recommended that 14 wedge anchors be used A masonry bit must be used to drill the pilot hole These items can be purchased at your local hardware store Begin by placing the ceiling plate into position against the ceiling keeping it level Mark off four holes to be used for securing the mount and place the ceiling plate aside Next drill holes using the appropriate masonry bit for your anchor
Download Pdf Manuals
Related Search