Philips SBCHC105 User's Manual
Contents
1. Explanation of Controls SBC HC105 English SBC HC105 Attention Headphone does not work as height or slightly higher than the reception height of stand alone system It could be used as the IR headphone replacement of the headphone receiver of 2 Position the LEDs towards the listening area ensuring the model SBC HC100 Or it could be used as that there are no obstacles in between 3 Switch the IR headphone on 4 Set the volume control to maximum on the IR an additional headphone receiver for compatible models please see list headphone 5 While listening to your IR headhone adjust the SBC HCI00 SBC HC500 volume of the signal source to the headphones SBC HCI20 SBC HC520 maximum acceptable sound level SBC HC360 SBC 3925 6 Adjust volume control of the IR stereo headphone to a SBC HC380 SBC 3930 comfortable listening level SBC 3940 SBC 3935 7 Specifications rey N System Infra Red IR List is for reference only System compatibility are Carrier frequency Left channel 2 3 MHz subjected to change without prior notice To ensure Right channel 2 8 MHz please check with your local Philips agent or Philips sale Modulation FM organization Power supply headphone 2 x R3 AAA batteries p Frequency range 20 20 000 Hz Instruction for use IR headphone S N ratio gt 50 dB l Introduction Distortion lt 0 5 THD CONGRATULATIONS You have just bought a most Channel separation 240 dB sophisticated stereo Infra Red2. IR headphone This headphone gives you complete freedom to enjoy your music without the inconvenience and limitations of headphone cables To ensure the best performance of your stereo IR headphone please read this document carefully 2 Features Receives stereo audio signal from your IR transmitter without wires Uses high frequency IR rays to carry audio signal ensuring clear sharp reception 3 What is included In this set the following components are included LIR stereo headphone 2 Instructions for use 4 Explanation of controls On the IR stereo headphone receiver see figure 1 1 Power on off switch 2 Power on off LED indicator 3 Volume control 4 IR sensors to receive IR light from the transmitter 5 Installation 1 Insert two batteries R3 AAA into the battery compartments as shown in figure 2 ensuring that the polarity is correct 6 Operation 1 Switch on the IR transmitter and place it at the same Figure 2
Download Pdf Manuals
Related Search