Philips 20HFL2819D/12 Installation Manual
Contents
1. Startup Channel Volume Limit Fixed Volume Enable Fixed Volume Value Headphone Direct Volume Disabled Osd Disable Disable Setup Menus Teletext On Navigate KIODE Value Back LA Jexit Hotel TV Menu Hotel Mode Pin8 Last Status Panel Lock RCU Inhibit Startup Position Startup Channel Volume Limit Fixed Volume Enable Fixed Volume Value Headphone Direct Volume Disabled Osd Disable Disable Setup Menus Teletex On EA navigate E ae ats Last Status Disabled Disable Setup Menus RCU Inhibit Hotel Mode Feature to enable or disable the Hotel TV Menu features Note When enabled the TV will follow configured feature settings If the Hotel Mode is set to OFF none of the settings from this menu will be active Pin8 Feature to enable or disable the auto SCART feature Note This feature allows a connected SCART device to turn the TV on or off Last status This feature allows the TV to remember the last used configuration and restore when startup again Otherwise default settings are used Panel Lock Feature to enable or disable the functionality of the side control TV button Select On to lock the side control TV button Select Off unlock the side control TV button RCU Inhibit Enable or disable the functionality of the Remote Control Select On to block all RC commands Select Off and all RC commands are enabled 21 Startup Position Startup Channel Hotel TV Menu H2. Startup Position Startup Channel Volume Limit Fixed Volume Enable Fixed Volume Value Headphone Direct Volume Osd Disable Hotel TV Menu Osd Disable Teletext Copy To USB Copy From USB Wakeup Time Channel Wakeup Time Volume Usb Option Fixed Pic Mode Digital Tuner Multiple RC support Welcome Screen NIT Update opy From USB Wakeup Time Channel Hotel TV Menu Osd Disable Teletext Copy To USB Copy From USB Wakeup Time Channel Wakeup Time Volume Usb Option Fixed Pic Mode Digital Tuner Multiple RC support Welcome Screen NIT Update On Off Off Off Off HDMI1 1 SS 6S Off 20 Disabled Disable a Menus OK OK 0 g On On On Disable Setup Menus Disable Setup Menus On OK OK SS A PHILIPS Feature to hide menu items when the Remote Control Menu key is pressed e Disable All Menus all menu icons are hidden e Disable Setup Menus Picture sound settings and media browser menu icons are displayed When Hotel Mode is set to Off all TV menu items will be displayed picture sound settings install and retune channel list media browser If OSD Disable is set to Disable All Menus the EPG will not be displayed Teletext Feature to hide the Teletext display e On to enable Teletext activation e Off to hide Teletext Copy To USB Feature to copy configuration and channel settings Press OK to copy settings to a USB device conn
3. options PHILIPS 2 Find out the state of the TV It is important to know if a TV is in virgin mode out of the box or installed before If you can see this screen below you know that the TV is in virgin mode and you can install the set See chapter 4 of this manual First time installation Welcome please select your language Righter Bienvenue Veuillez choisir une langue Francais Willkommen Wahlen Sie bitte Ihre Sprache aus Deutsch Benvenuti Selezionate la vostra lingua Italiano Bienvenido seleccione un idioma Espanol Ho geldiniz l tfen dil se imini yap n z T rk e Dobrodo li izberite va jezik Slovenski dv z lj k k rj k v lassza ki a nyelvet Magyar Bem vindo favor selecionar seu idioma Portugu s Dobro do li molim izaberite svoj jezik Hrvatski Prijemny de zvolte si jazyk Sloven ina W A Select Language OK Set language If you power on the set and then press the Home button on the guest remote you will see this screen appear if the TV already has been installed or the wizard was already skipped Hotel TV menu is ON Lpg Picture Hotel TV menu is OFF ER EEE Picture PHILIPS You can start the installation wizard again by reinstalling the TV as explained in chapter 3 of this manual To be able to modify any settings on the TV you must disable the Hotel TV mode Disable the Hotel TV mode To access the setup menu you should press th
4. 255 char string 35 PHILIPS Channel number or LCN can take values from 1 9999 as it is defined in code These limitations are applied in the editor Save when the channel list is according with the requirements press Save button for saving the channel list This option will rewrite the open file and save it in the same location If you want to save the file in to another location please use the Save As option from File menu 3 Import channel list to TV Import the channel list back to TV requires the USB drive with the file channelTable xml saved on root of the drive To import the channel list back to TV the following steps should be followed make sure that Hotel mode is set to OFF Insert the USB key on side connector of the TV Enter in the MENU and navigate to Channel list Select the option Import Channel list to USB ae a pP When the process is complete remove the USB key Do check the channel list before saving the cloning data 36 PHILIPS 2014 Koninklijke Philips N V All Rights reserved Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips N V or their respective owners www philips com
5. and Signal quality level of signal received on the frequency Signal level B defined above vA Navigate OK Start search CIC 3 _JBack wie Network Channel Scan Searches for the linked channels in the broadcast system install and Retune Automatic channel scan Retune Manual channel scan Analogue fine tune First time installation Analogue Fine Tune You can use this setting for fine tuning analogue channels This feature is not available if no analogue channels are stored BISelennncint Automatic channel scan Retune Manual channel scan Network channel scan First time installation 16 PHILIPS First Time Installation Deletes all stored channels and settings resets the TV to factory settings and starts the first time installation You can follow the instructions in the Initial Installation section for more information on this process BB install and Retune Automatic channel scan Retune Manual channel scan Network channel scan Analogue fine tune 17 ay l a J E i ap a a maw wr fr ICT O ait ile 1 7 5 CAREC EBRARYW Aw For channels options like reorder rename or lock you have to access the menu from the picture below Channel management can be also done with channel editor application available for PC Check appendix 1 for channel editor installation and usage Press OK for the submenu ame LE Channel List Note If the following menu is not d
6. and confirm it by entering it once more Press the OK button to continue If the two PIN codes match your PIN code will be set WARNING When you are required to enter a PIN code for any menu operation you should use the PIN that you have previously defined during the first time installation Press OK to continue to the next screen which will ask if you want to start an automatic channel scan Do you want to start an automatic channel scan Select Yes and press OK to continue The next screen is asking about what the type of channels that will be installed Please Select Digital Search Type Aerial Aerial amp Cable Aerial Installation If you select the AERIAL option in the Search Type screen the TV set will search for digital terrestrial TV DVB T broadcasts NOTE You can press the MENU button to cancel After all the available stations are stored the Channel List will be displayed on the screen If you like to sort the channels according to the LCN please select Yes and then press OK Press the MENU button to quit the channel list and watch TV LCN is the Logical Channel Number system that organizes available broadcasts in accordance with a recognizable channel sequence if available Cable Installation If you want to install DVB C channels select the CABLE option and press the OK button on the remote control to continue To continue please selec
7. and it can be set to Auto Minimum and Maximum Backlight function will be inactive if Power Save Mode is set to ON Backlight cannot be activated in VGA Media Browser mode or while the picture mode is set to Game Noise Reduction If the broadcast signal is weak and the picture is noisy use the Noise Reduction setting to reduce the noise amount Noise Reduction can be set to one of these options Low Medium High or Off Advanced settings Press OK and you will access the advanced options for the Picture menu Reset This option will reset all values for image to default Pressing the Return button will return you to the main menu Pressing the MENU button will exit you from the 11 The sound options are available from the main menu TE ERA E E Sound Select and press OK to access the submenu BE Sound Settings Volume Equalizer Balance Headphone Sound Mode Stereo AVL Off Digital Out PCM RAPE UG KIO Change Value 3D Back amp Exit The options available are Volume Adjusts the volume level Equalizer In the equalizer menu the preset can be changed to Music Movie Speech Flat Classic and User Press the MENU button to return to the previous menu The equalizer menu settings can be changed manually only when the Equalizer Mode is in User mode Balance This setting is used for emphasizing left or right soeaker balance Headphone Sets headphone volume Sound Mode Y
8. can change Satellite configuration and Country currently not used Preferences open a dialog for managing application settings Satellite names Countries User band values Settings Preferences Image 1 2 Tools Help submenu provides basic help about how to use channel list editor tool Toolbar provide shortcut icons for basic operations with channels and channel list 31 PHILIPS First group from the left provides file operations next to it provides channel managing operations and the last group provides list settings and help Seah XVe 72 amp OC New Open Save Undo Redo Add Clone Edit Remove List Settings Help Image 1 3 Toolbar Clone clones channel info except for Service name and service number for easy adding channel with similar values Under tool bar there is a list of channels from the loaded list sorted by network type in a tree view More than one channel can be selected by holding SHIFT or CTRL and right mouse click n 1 BBC Two Eng DVB C 2 BBC One Lon DVB C gt 3 BBC One West DVB C 4 BBC One East W DVB C Das Erste HD DVB C arte HD DVB C 7 SWR BW HD DVB C 8 SR Fernsehen DVB C 9 TVP Polonia DVB C gt 10 TVP INFO DVB C 11 TVP Kultura DVB C gt 12 TVP Historia DVB C 13 CBeebies DVB C 14 Bayern 2 DVB C 15 Bayern 1 DVB C 16 BR KLASSIK DVB C h 17 hraNFO DVB C 18 WDR 3 DVB C i 19 WDR 4
9. startup e On a welcome screen is shown e Off a welcome screen is hidden NIT Update If this option is enabled LCN information s will be updated automatically This option is available only for Nordic countries Recommended action is to disable NIT table 24 Hotel TV Menu i Osd Disable Disable Setup Menus Teletext On Copy To USB OK Copy From USB OK Wakeup Time Channel i Wakeup Time Volume a Usb Option On Fixed Pic Mode Off Digital Tuner On Multiple RC support Off Welcome Screen On NIT Update High Security Navigate Hotel TV Menu Teletext Copy To USB Copy From USB Wakeup Time Channel Wakeup Time Volume Usb Option Fixed Pic Mode Digital Tuner Multiple RC support Welcome Screen NIT Update High Security Reset to Default Values Hotel TV Menu Copy To USB Copy From USB Wakeup Time Channel Wakeup Time Volume Usb Option Fixed Pic Mode Digital Tuner Multiple RC support Welcome Screen NIT Update High Security Reset to Default Values EPG Enable Disable wa Navigate PHILIPS If you set this option as ON the Hotel TV menu will be accessible only with Philips master remote control High Security Reset to Default Values Highlight this option and press the OK button on the remote to return the TV to default settings Note Only Hotel TV options will be affected by this action TV channels will not be deleted EPG Enabled Disable Enabling this opti
10. the previously selected channel except for values that needs to be unique Service Name Channel Number for easy adding new channels on the same frequency Depending on the Network type more or less parameters are copied In case the user changes the Network Type all fields will be cleared and drop back to regular Add mode When correct values are entered user can save with pressing Enter key or pressing Add button Clone is disabled for analogue channels because all analogue parameters need to be unique 34 PHILIPS a XmiChannelConfigurator 2 0 6 Hotel TV i 7 i g kabo New Open Save ndo Redo Add Clone Edit Remove List Settings Help Country All Genre All genre Only Encrypted Common Service Params Network Type DVB C Sevice Name Channel Number Service Type Digital television service 1 Country United Kingdom Genre All genre Locked Encrypted DVB Triplet Network ID Semice ID Transport Stream ID Tuner Confiquration Frequency 634000 Modulation 128QAM Symbol Rate 6875 Total number of channes 19 List version 1 Loaded list G channelTable xml SS Image 2 3 Edit Edit enables editing of the currently selected channel info When correct values are entered user can save with pressing Enter key or pressing Save button Channel or selection of channels can be moved using dra
11. DVB C h s s Image 1 4 Channel list tree view Channel or selection of channels can be moved using drag and drop Move will cause renumbering of the channels in the list Move is possible only in the same subcategory moving channel from DVB S to Analogue will display message Image 1 5 Info message j You cannot move to diferent Network types Image 1 5 Info message On the right part of the main windows currently selected channel details are loaded It consists of one mandatory group 32 PHILIPS DVB C BBC Two Eng 1 Digital television service 1 United Kingdom All genre Image 1 6 Common Service Params And depending on the Network Type of the currently selected channel different additional groups can be displayed 1 9901 1116 Image 1 7 DVB Triplet Values in DVB Triplet are only present when DVB channels are selected for Analogue channels values in this group are empty 634000 128QAM 6875 Image 1 9 DVB C When the form is in add edit state new buttons are added under Tuner Configuration group Common Service Params Network Type go VB C Sevice Name Channel Number 1 Service Type Digital television service 1 Country United Kingdom Genre AI genre gt Locked J Encrypted DVB Triplet Network ID 2 Serice ID 6302 Transport Stream ID 115 Tuner Confiquration Frequency 634000
12. Modulation 128QAM Symbol Rate 6875 Save Cancel Image 0 8 Edit state 2 Editing channel list Channel list editing can be performed easily with use of the toolbar buttons Add Favourite Clone Edit Remove 33 PHILIPS a XmlChannelConfigurator 2 0 6 Hotel TV j b C So m a b i D File Edit Tools Help New Open Save Undo Redo Add Clone Tx List Settings Help Country All Genre All genre Only Encrypted L Common Service Params Network Type DVB C fm 1 BBC Two Eng DVB C L3 BBC One West DVB C Sevice Name Sisari si 4 BBC One East W DVB C Channel Number 1 5 Das Erste HD DVB C 6 arte HD DVB C Service Type Digital television service 1 7 SWR BW HD DVB C Country United Kingdom 4 i 8 SR Fernsehen DVB C 10 TVP INFO DVB C J 11 TVP Kultura DVB C amp Locked J Encrypted C 12 TVP Historia DVB C 13 CBeebies DVB C DVB Triplet i 14 Bayern 2 DVB C 15 Bayern 1 DVB C 16 BR KLASSIK DVB C 17 hr iNFO DVB C z 18 WDR 3 DVB C Transport Stream ID 115 i19 WDR 4 DVB C Network ID 2 Serice ID 6302 Tuner Confiquration Frequency 634000 Modulation 128QAM v Symbol Rate 6875 Save Cancel Total number of channes 19 List version 1 Loaded list G channelTable xml Image 2 1 Add Add changes the state of the main form to add state and empty s all the fiel
13. No 2 5 Serial No TV Life Time 1493 minutes Tv APS Time Fri 14 02 2014 16 15 Bootloader V_1 9 PCF 28 VESWNVX_NO1_169WXGA_E N NO P NO ER XX 82_ 04 PTF 28 VESWNVX NO1_169WXGA_E_N_NO P_NO_ER_XX_82_ V 0 0 1 PQF pq_full_hd 02 AQF AQ 6W PEQ9_ SR2 V0000003 82SR2TP23154186NMDE38P_ 15928 M80002HCO2YEV076 05 02 2014 SAMPLE HW Profile Version 033 SW Profile Version 092 Lan Profile Version 170 Boot Logo Name NULL 29 PHILIPS Appendix 1 Channel List Editor Channel List Editor PC tool enables editing exported XML channel list files in a way that is more understandable and user friendly Note XML means Extensible Markup Language Channel list should be exported from a TV set using the option available in the following menu make sure that Hotel mode is set to OFF Insert the USB key on side connector of the TV Enter in the MENU and navigate to Channel list Select the option Export Channel list to USB oS When the process is complete remove the USB key PC Tool can create a new empty channel without importing channels on TV but we do not recommend this mode of use due to the high level of possible errors that can be entered by user wrong parameters or channel type When we export the channel list from TV on USB drive there will be a file called channelTable xml in the root folder You can open that list for editing from within PC tool using Open option It will import all t
14. Register your product and get support at www philios com welcome Installation Manual for xxHFL2819D 10 Status Release Version 1 3 Date October 2014 Author Marian Pufulete PHILIPS Contents 1 Requirements before starting the installation cccccescccccsssccccessececceseccceensececsusececceeeceeeeusecessuaecesseneceessenecesseneess 2 2 Findoutthestateor the TY sesso cee sea tet nesecacieatncened ncnetcosspa E 3 Be PE UI TO span en heehee cscs pes ed ete seca ncaa eee oes eeacamre on anader a cecc ast as Aecceenceedenceoetes 5 a e aana ia aence ceca acceso E se E 7 Je PITON seca aco A r A tus tae E E EAE 11 e a E E E 12 Fee e E TE E E E E A E E A A T E E EE E A A EEG E 13 3s A Hanne TNS ee E E E O E 18 r Mear OS Ci onina A meeetececeeuseinnreietceee ecteece tees nsec 20 10 PTT SSO he CN soriana A A Ea EAE AAT AOE E AE AAEE RA EAE tensa A 21 E WE Ome EOU O A E O S E E E T E E eee eens 26 12 CONE sa nest eee ace eres aceasta ee tee ease cach eteceneu eee ene cayetose nears ceencecente tees semanas 27 Lo SAU SS UIUC Sahin casancinecgi ts esacyusontsh nen insaeaheieay E E E cites Sohne sicswee Sasa ip tates E N 28 14 CSM Con umer ocup MENU on A E A E 29 APESTA To A E E E ones 30 Caa es Mis ECO ea E E eee ee 30 TGC PLACE descr iphion and Usap Cerrina Eee aa EEN AEEA EARTEN TAa aE PAEO EE aE ER EEEa a 31 PIA WIN O W aeai E EE E E E E EE EE EEEE 31 PPE V5 WUT S a E E O E E S E A NE 33 Limitations and Constr alnis s
15. channel installation is complete the following summary appears Edit Channel List 2 BBC Two Eng 3 BBC One West 4 CBeebies 5 BBC One East W 6 BBC One CI 7 SATA 8 ProSieben 9 kabel eins Move Edit name Lock AIP Function Pa navigate OK Watch eS Exit Back Jump cn Jone Page UP DOWN Here you can move edit or lock channels The information bar displayed on the bottom part of the screen will guide you through the option that you are using Now you can press MENU to exit the installation page or you can press the OK button to watch TV 10 PHILIPS Pressing the MENU button will bring the MENU with all options active 5 Picture LEEG Picture Accessing the picture submenu will bring the following menu on the screen B Picture Settings Mode Contrast Brightness Sharpness Colour Power Save Mode Backlight Noise Reduction Advanced Settings Reset WA Navigate 47 gt change Value exit The option which can be set Mode Can be set to one of these options Cinema Game Dynamic and Natural Contrast Sets the difference between the brightest and darkest of the screen Brightness Sets the brightness value for the screen Sharpness Sets the sharpness value for the objects displayed on the screen Color Sets the color value adjusting the colors Power Save Mode To set Power Save Mode to ON or OFF Backlight This setting controls the backlight level
16. ds so the user can enter new values Only when in add state Network Type combo box is enabled When correct values are entered user can save with pressing Enter key or pressing Add button aJ XmlChanneiConfigurator 2 0 6 Hotel TV a am lt a po dL File Edit Tools Help New Open Save Undo Redo pe Edit Remove List Settings Help Country All v Genre All genre Only Encrypted Common Service Params Network Type fay BBC Two Eng DVB C 2 BBC One Lon DVB C 3 BBC One West DVB C 4 BBC One East W DVB C Channel Number i Das Erste HD DVB C _ 6 arte HD DVB C Service Type Digital television service 1 7 SWR BW HD DVB C i 8 SR Fernsehen DVB C 9 TVP Polonia DVB C Genre All genre 10 TVP INFO DVB C 11 TVP Kultura DVB C Locked J Encrypted C 12 TVP Historia DVB C 13 CBeebies DVB C DVB Triplet i 14 Bayern 2 DVB C i 15 Bayern 1 DVB C i 16 BR KLASSIK DVB C 17 hr iNFO DVB C i 18 WDR 3 DVB C Transport Stream ID i 19 WDR 4 DVB C Sevice Name Country Network ID Service ID Tuner Confiquration Frequency Modulation Symbol Rate Cancel Total number of channes 19 List version 1 Loaded list G channelTable_xml Eo Image 2 2 Clone Clone is much like Add just instead of leaving all the fields empty it leaves all the values from
17. e RCS SETUP key and then press the Home Menu button if you are using the 22AV8573 To access the Hotel TV menu using the guest remote you need to input the key sequence 3 1 9 7 5 3 MUTE You can use the guest remote to select with the up or down arrow buttons and change values with the left or right arrow buttons Set the Hotel TV Mode to OFF OTT OT Off Of HDMI1 Off Disabled Disable Setup Menus On KIO rE Press MENU or Return button to exit this menu Note Setting Hotel mode to OFF will disable all features from the Menu TS a I rua Y If you want to start an installation from scratch you can always re install the TV First step is to set the Hotel Mode to OFF and exit using the MENU or Return button on the guest remote ot Mode as Ping Off Last Status Off Panel Lock RCU Inhibit Startup Position Startup Channel Volume Limit Fixed Volume Enable Fixed Volume Value Headphone Direct Volume Disabled Osd Disable Disable Setup Menus Teletext On vA Navigate KIO Change Value 3D _ Back Jexit Note It is not required to use a save button once you exit the menu you will save the settings from the Hotel TV Menu Press the MENU button on the guest remote to access the full menu of the TV The following menu should be displayed Select the option Install and Retune highlighted below ao Yiu gw Install and Retune Press OK to access the
18. ected on the side USB connector Copy From USB Feature to copy configuration and channel settings from a USB device Select OK to copy settings from a USB device Wakeup Time Channel Feature to set the channel to view when the TV wakes up e Use the digits button s on the remote to complete the entry field All timers and events are not possible to set once all menus are hidden Wakeup Time Volume Feature to set the wakeup time volume level Selectable values between 0 63 23 Digital Tuner Hotel TV Menu Osd Disable Teletext Copy if USB Copy From USB Wakeup Time Channel Wakeup Time Volume Usb Option Fixed Pic Mode Digital Tuner Multiple RC support Welcome Screen NIT Update Disable Setup Menus On OK OK 0 ha On On On PHILIPS USB option Feature to detect if a USB device is connected e On to enable USB device detection e Off to disable USB device detection When Off the Media Browser icon will be displayed but cannot be activated Fixed Pic Mode Feature to hide the picture menu icon e Off picture icon is displayed amongst all menus e On picture icon is hidden Digital Tuner e Off mixture of analog and digital channels e On digital channels only Multiple RC support Feature to enable the Multi RC e Off feature is disabled e On feature is enabled and shows which RC is set Welcome Screen Feature to show a welcome screen at
19. ed as FAT or FAT32 Access the Hotel Mode Menu with the RC 8573 yellow remote or with the guest remote by entering the key sequence 3 1 9 7 5 3 MUTE and navigate with the TV remote to following items Copy from USB 1 Select Copy from USB and press OK 2 The clone data will be loaded from the USB device into the TV 3 Wait until the OSD message returns to its earlier state before removing the USB device 4 Power down the TV and remove the USB device Copy to USB 1 Select Copy to USB and press OK 2 The clone data will be loaded from the TV into USB device 3 Wait until the OSD message returns to its earlier state before removing the USB device Content of the USB key ee 9 ne ee SS Sa e M ter G STORENGO gt v p Sea ith Burn New folder Jo CLONE00001 Because the clone data is stored inside a folder multiple clone data can be stored on the same USB key The cloning is compatible between all screen sizes 27 PHILIPS 13 Feature settings Multi RC Enter the MultiRC Menu Feature to configure the remote control to work with one TV To enter the MultiRC Menu on TV press the key sequence MENU RETURN 1 2 3 4 On the TV a menu will guide you to select the desired TV configuration Choose a number between 1 and 4 to assign to the TV Afterwards configure the remote control for the same number as TV by keeping pressed MENU HOME Digit for 5 seconds The HFL2809 supports a maximum
20. ew software upgrade If new software is Hard Of Hearing ao found and downloaded successfully with the next power up Audio Description off the TV starts with new software version In a hotel the safe Auto TV OFF amp Hours approach will be to disable this option Power Up Mode Last State Application Version Is the software version currently installed on TV Country Germany Hard of Hearing Audio help for impaired persons CA Jexit 47 change Value MPD Audio description Refers to an additional narration track for blind and visually impaired viewers of visual media including television and movies Auto TV OFF You can set the timeout value of auto off feature When the timeout value is reached and the TV is not operated for selected time the TV will go off Note Auto switch OFF is a UE regulation for reducing the power consumption Power Up Mode Defines the behavior of the TV in case of power cut Last state When power is restored the TV will return to the same state before power cut Standby When power is restored the TV will go by default to standby This is recommended setting Install and Retune Menu Content all options related to channel installation 14 PHILIPS Install and Retune The menu contains options for automatic channel install manual channel install network scan analog fine tune for a better reception of the analog TV channels The first time installation option will delete the TV channe
21. g and drop Move will cause renumbering of the channels in the list Delete removes the channel from the list When single service channel is selected on delete message appears asking the user to confirm deletion of the channel with the corresponding name In case more than one channel is selected it will only inform the user of the number of channels that will be deleted ay XmiChannelConfigurator 2 0 6 Hotel TV E Xs File Edit Tools Help jes 7X amp o New Open Save Undo Redo Add Clone Edit Remove List Settings Help Country All v Genre All genre Only Encrypted 5 DVB 1 BBC Two Eng DVB C 2 BBC One Lon DVB C 3 BBC One West DVB C 4 BBC One East W DVB C 5 Das Erste HD DVB C 6 arte HD DVB C Digital television sece 1 7 SWR BW HD DVB C i 8 SR Fernsehen DVB C 9 TVP Polonia DVB C Service deletion Beebies DVB C You are about to delete 4 services 14 Bayern 2 DVB C Do you want to proceed i 15 Bayern 1 DVB C 16 BR KLASSIK DVB C L 17 hr iNFO DVB C 18 WDR 3 DVB C 19 WDR 4 DVB C Total number of channes 19 List version 1 Loaded list G channelTable_xml m Image 2 4 Delete Limitations and constraints Service name length is not explicitly defined in DVB standard Only limitation is the size 8bit reserved for value in SDT descriptor that defines the service name length this compile to
22. he channels and load them according to the Network Type DVB S DVB T Channel can be moved inside its Network Type added to favorites channel info can be edited removed new channel can be added Multiple selection of the channel can be performed but edit option is limited in that case depending on the desired action performed Moving channel triggers renumbering of the other channels depending on the move result There are two modes LCN renumbering and non LCN renumbering For Channel List editor we recommend usage of a PC with Windows XP or Windows 7 and Net framework 2 0 and 3 5 should be installed Currently only English is supported for graphical user interface 30 PHILIPS Interface description and usage 1 Main window Main menu consists of pretty much the same options as the toolbar below with exception of Save as and Exit option from File submenu File submenu consists of standard options as it can be seen on ion the Image 1 1 File Edit Tools New Ctrl N Open Ctrl O kd Save Ctrl S Save As Exit Image 1 1 File Edit submenu consists of controls to Add Edit and Delete the current selected channels in the list Tools Help 2 Add new channel ow O f Edit channel 2 D Remove channel 1 C PORTADA Image 1 2 Edit pne Tools submenu consists of Settings and Preferences Image 1 2 Tools Settings open Channel list settings dialog where user
23. isplayed in the menu please go and disable the Hotel TV mode Edit channel list Edit Channel List Favourites Active Channel List Export Channel List to USB Import Channel List from USB The channel list with all TV channels installed will be displayed 18 PHILIPS With the up and down arrow buttons you can select the channel and with the left and right arrow buttons the function which will be used for that channel To move a TV channel in the list you need to do something similar Select the TV channel with the up or down arrow buttons and then select the Move function and press OK The TV will display a new window in which you must enter the new position of the channel The channel plan will be updated after you press OK Favourites Allows adding channel to a particular list To add a channel to the list select the channel using Up or Down arrow and press OK to make the selection A pink star will appear next to the channel name Edit Channel List Active Channel List Export Channel List to USB Import Channel List from USB Active Channel List This option allows you to toggle between different type of list TV Only Radio Only Text Only Analog TV only and Favourites These options are available for the Digital Cable and Aerial Edit Channel List Favourites Active Channel List Export Channel List to USB Import Channel List from USB 19 Export Channel list to USB This
24. ls and set all settings to default values except Hotel TV settings mm Install and Retune Manual channel scan Network channel scan Analogue fine tune First time installation Automatic Channel Scan Retune Displays automatic tuning options available Digital Aerial Searches and stores aerial DVB T channels Auto channel scan COTA Digital Cable Searches and stores cable DVB C channels Digital Aerial Analogue Searches and stores analogue channels Digital Cable Analogue Digital Aerial amp Analogue Searches and stores aerial DVB T and analogue channels Digital Aerial amp Analogue Digital Cable amp Analogue Digital Cable amp Analogue Searches and stores cable DVB C Aerial amp Cable and analogue channels Aerial amp Cable Searches and stores DVB C DVB T and analog channels Note Using any of this option will delete the current channel plan If you are sure select Yes and press OK 15 Manual Channel Scan This feature can be used for direct broadcast entry EREET ECT Automatic channel scan Retune Network channel scan Analogue fine tune First time installation Wal Search Search Type lt DigitatAeriat N Channel The preset frequency Channel 24 Frequency Input for the frequency requency 498 00 MHz Network scan Enable or disable the network Network channel scan Disabled scan Signal quality amp Signal Level These two options will show the quality
25. olim izaberite svoj jezik Hrvatski Pr jemn de zvolte si jazyk Sloven ina W A Select Language OK Set language Please select your language and press OK to start the installation of the TV set The first step is to select the country which will enable country cable providers time setting and channel list presets First time installation Welcome Country ermany Search Type Digital only Teletext Language West Scan Encrypted Channels Yes WTA Select Setting 7b choose your country OK Start search The next step is to select what type of TV channel search that you want to perform Digital only TV will search only for digital channels Full The TV will search for digital and analog channels Analogue TV only The TV will search only for analogue channels Note On the bottom part of the screen the TV will display which buttons can help you to navigate and change the options Once you have set up the channel search you can press OK to go to next step of the installation PHILIPS Depending on country you might need to follow an additional step setting up a pin code This pin code will be used for blocking TV channels and settings r i tnter In some cases due the country regulations you have to provide a pin code formed from four digits This pin code will be required in case you want to modify the settings of the TV Selected PIN code cannot be 0000 Enter a PIN code
26. on will make EPG available when Hotel TV mode is active 25 PHILIPS 11 Welcome Logo Once this feature is configured and set the welcome image will be displayed within 8 seconds after switch on This page will remain until a key on the RC is pressed How to upload Welcome Logo 1 Create a graphics file 960 x 540 png with the logo Follow the next guidelines Maximum size of the welcome logo should be less than 1024 Kb Always use 16 bit color depth File name hotel_wel png File name is case sensitive Create a folder named welcome_image on your USB key Save the image into the welcome_image folder on you USB key Insert the USB device into TV Enter the Hotel Mode Select the option Copy from USB Make sure that option Welcome screen is set to ON CON DU BW N Note For the welcome picture there is a color lookup table used that is limiting the number of colors available to display This can result in certain display color artifacts and using a limited number of different color values can improve this Once this feature is configured and set the welcome image will be displayed within 8 seconds after switch on This page will remain until a key on the RC is pressed 26 a PHILIPS With cloning it is possible to copy to from a USB device the configuration data and the channel list data from a TV Place a USB Memory stick in the USB side connector of the TV The USB device should be formatt
27. option will export the channel to USB The exported channel plan can managed on PC using Channel Editor Application See appendix 1 Note The USB drive must be format FAT32 Edit Channel List Favourites Active Channel List Import Channel List from USB Import Channel list to USB This option will import the channel plan from USB Make sure that only channel plans managed with Channel Editor are imported from USB oe ey i Ce Media Browser You can play photo music and movie files stored on a USB disk by connecting it to your TV Connect a USB drive to one of the USB inputs located on the side of the TV TV will read the content and provide an option to browse the USB drive In Media Browser setting the following items are available Videos Photos Music and Settings Files which can be played by the TV will be displayed inside the category If the file is not available in none of the category it means that file is not supported by the TV You can set your Media Browser preferences by using the Settings Menu IMPORTANT Back up your files before making any connections to the TV The manufacturer will not be responsible for any file damage or data loss Certain types of USB devices for example MP3 players or USB hard disk drives memory sticks may not be compatible with this TV 20 PHILIPS 10 Professional Settings Hotel TV Menu Pa Hotel Mode Ping Last Status Panel Lock RCU Inhibit Startup Position
28. otel Mode Ping Last Status Panel Lock RCU Inhibit Startup Position Startup Channel Volume Limit Fixed Volume Enable Fixed Volume Value Headphone Direct Volume Disabled Osd Disable Disable Setup Menus Fixed Volume Enable Hotel TV Menu Hotel Mode Ping Last Status Panel Lock RCU Inhibit Startup Position Startup Channel Volume Limit Fixed Volume Enable Fixed Volume Value Headphone Direct Volume Disabled Osd Disable Disable Setup Menus N Off Off Off Off HDMI1 ume Value Headphone Direct Volume Startup Position Select startup program source when TV is switched on via Power On key or Digit keys e Auto TV wakes up in last used channel source e TV The TV set wakes up with the channel specified in Startup Channel field e SCART Side AV HDMI1 YPbPr VGA_ PC Startup Channel Feature to select the startup channel Volume Limit Feature to set the maximum volume level Selectable values between 0 63 Fixed Volume Enable Feature to set Volume to a set Fixed Volume Volume is fixed to the level defined at the option Fixed Volume Value Fixed Volume Value Feature to set the Fixed Volume value Selectable values between 0 63 Headphone direct Volume Control Head Phone out volume instead of TV speakers TV speakers volume are set to Last Status before Hotel Mode is activated 22 Hotel TV Menu Hotel Mode Pin8 Last Status Panel Lock RCU Inhibit
29. ou can select Mono Stereo Dual or Dual Il mode only if the selected channel supports that mode AVL Automatic Volume Limiting AVL function sets the sound to obtain fixed output level between programs For instance volume levels of advertisements tend to be louder than programs Dynamic Bass Press lt or B button to set Dynamic Bass as on or off Digital Out Sets digital out audio type Pressing the Return button you will return to the main menu Pressing the MENU button you will exit from the MENU 12 ao DA Settings The submenu can be access by pressing OK when this menu is highlighted Language Parental Timers Date Time Sources Other Settings The options available are The Conditional Access Controls conditional access modules when available Language Configures language settings may change depending on the country selected Preferred and current settings will be available a Menu Preferred Audio English Subtitle English Teletext West Guide English Current Audio None Subtitle None TA Navigate AIP Set the language used in menus Paes Parental Configures parental settings including PIN code Menu lock Maturity Lock and Child Lock 13 PHILIPS Timers Sets timers for selected programs Sets sleep timer to turn off the TV after a certain time Date Time Sets date and time Note The TV takes the time info via the broadcast Correct time
30. senari aE REN IRES aaa ANS Ean ERSEN aS AANS TERADE aE a aeS TREASA TRENES 35 Dapon 9 a2 001 00 Om Hcy aa co TV eerenet er ann nr rere einer ere eer nr ree ee ee O 36 PHILIPS 1 Requirements before starting the installation Before starting the installation make sure that you have everything you need at hand Master remote control 22AV8573 or Guest remote control 22AV1407A 3 And USB stick To enter the Hotel TV menu using the guest remote 22AV1407A For all HFL2809 models you can use the guest remote and the key sequence 3 1 9 7 5 3 MUTE to access the Hotel Mode The key sequence will not work if High Security Mode is enabled To enter the Hotel TV menu using the master remote control 22AV8573 e Press the RCS Setup key e Press the Home Menu key Note The Home Menu key on the master remote control 22AV8573 will activate only the hotel menu navigation in this menu must be done with the guest remote 22AV1107A Exit Hotel TV Menu Leaving the Hotel TV Menu after making the required settings can be done using the master Remote Control 22AV8573 or with the TV included standard Remote Control To exit the Hotel TV menu with master remote control e Press the RC5 Setup key e Press the Home Menu key To exit the Hotel TV menu with standard RC Press the Menu key or Press the Return key Note On the bottom part of the screen the TV will display which buttons can help you to navigate and change the
31. submenu Select the last option available First time installation and press OK The TV asks for confirmation by showing the following screen PHILIPS Automatic channel scan Retune Manual channel scan Network channel scan Analogue fine tune If you are sure that you want to re install the TV select Yes and press OK Do you want to delete all channels and settings for first time installation TV will be reset TV will reboot itself and show the virgin state screens with a welcome message Note All settings will be reset to default values except Hotel menu values Those values will remain the same To reset the Hotel TV menu use the Reset to Default Values option present in that menu PHILIPS 4 Installation wizard When you turn on the TV for the first time or you have reinstalled the TV you should see the following screen The installation wizard from whom this screen is a part will guide you through all the menus for a basic TV installation First time installation Bienvenue Veuillez choisir une langue Francais Willkommen Wahlen Sie bitte Ihre Sprache aus Deutsch Benvenuti Selezionate la vostra lingua Italiano Bienvenido seleccione un idioma Espanol Ho geldiniz l tfen dil se imini yap n z T rk e Dobrodo li izberite va jezik Slovenski dv z lj k k rj k v lassza ki a nyelvet Magyar Bem vindo favor selecionar seu idioma Portugu s Dobro do li m
32. t YES and press OK To cancel the operation select NO and press OK Aerial amp Cable installation Using this option TV will search for all available TV channels DVB C DVB T plus Analog and install them on a single list You can select frequency ranges from this screen For highlighting lines use the V or A buttons You can enter the frequency range manually by using the numeric buttons on the remote control Set the Start and Stop Frequency as desired by using the numeric buttons on the remote control After this operation you can set the Search Step as 8000 KHz or 1000 KHz If you select 1000 KHz the search will take longer since the TV needs to check more frequencies Depending on your Country selection in the first time installation A 250 KHz search step option might be available on the Network Channel Scan screen Note that if you perform the search with 250 KHz option the search process could take longer Start Frequency lt 1 06 00 MHz gt 858 00 MHZ 101010 Press OK to start the installation process During this progress the bar will fill and found channels will be added to the list Note If option Aerial amp Cable option is selected when DVB T channel search is complete you need to define the start frequency end frequency and step for DVB C channels If you don t know those values use the default ones and press OK to start the search When the automatic
33. value of four remotes The default value is Remote 1 Remote 1 Press MENU 1 for 5 seconds Remote 2 Press MENU 2 for 5 seconds Remote 3 Press MENU 3 for 5 seconds Remote 4 Press MENU 4 for 5 seconds Example TV is configured for Multi RC 2 Remote control Press MENU 2 for 5 seconds Note Before disabling the Hotel TV for any reason reset the multi RC to default The reset procedure is explained below Enter the MultiRC Menu Feature to reset the MultiRC feature for the TV or for the remote control To enter the MultiRC Menu e Press key sequence MENU RETURN 4 3 2 1 On the TV you will see a dialog Reset OK Press OK key to reset the system After resetting the system will return to the factory default To reset the remote control to default value press MENU 1 for 5 seconds 28 PHILIPS 14 CSM Consumer Setup menu Enter Service Menu It is only possible to enter the Service Menu if the Hotel Mode is disabled Enter the Hotel Mode menu and set the Hotel Mode to Off To enter the Service Menu e Press the following key sequence Menu 1 2 3 6 5 4 No items can be selected in the Service Menu The software version number will show as VES141HE_x y z SERVICE MENU VEM141HE_0 7 78 SVN 130499 0009df 6062 dct Video Settings USB Loggin Audio Settings gging Off gt Options 1 Options 2 Options 3 Tuning Settings Source Settings Diagnostic USB Operations Model
34. will be available on Date Time Settings if the time info is provided in the broadcast If the TV is in no channel mode Date Time settings can be changed However if there is a channel preset only Time Settings Mode can be changed and if this is set to Manual Time Zone will be enabled If the TV is switched to standby mode and switched on later and there is no broadcast available time information will not be updated If there is a present broadcast however time information will be taken via the broadcast In other words time information will be available according to these priorities The TV first looks for the time info in the broadcast then to the user preference and lastly to the teletext time information Sources Enables or disables selected source options Other settings Menu Timeout The amount of time for displaying the menu and can have different values OFF 15 sec 30 sec and 60 sec Scan Encrypted channels Set the behavior for encrypted channels If set to NO all encrypted TV channels will be Skipped Blue Background Enables and disables a blue screen instead of channel Software Upgrade Press OK to access the menu where you can disable or enable the Automatic scanning or trigger Other ti o a manual upgrade Scan Encrypted Channels Yes Note If automatic scanning in Upgrade Options menu is Blue Background Off enabled the TV wakes up at 03 00 and searches broadcast seat deal ee pea i channels for n
Download Pdf Manuals
Related Search