Pelco Switch S66X User's Manual
Contents
1. 1 0 WARNINGS Prior to installation and use of this product the following WARNINGS should be observed 1 Installation and servicing should only be done by Qualified Service Personnel and conform to all Local codes 2 Unless the unit is specifically marked as a NEMA Type 3 6P enclosure it is designed for Indoor use only and it must not be installed where exposed to rain and moisture 4 Only use replacement parts recommended by PELCO PELLO S66 S66X Sun Shroud Installation Manual Manual C410M 9 94 2 0 SCOPE This manual covers the S66 S66X Sun Shroud for the EH66 and EH66X Series Environmental Enclosures 3 0 DESCRIPTION The S66 S66X sun shroud is designed to protect the EH66 EH66X enclosure from the direct rays of the sun and reduce internal temperature approximately 10 15 The following items are required for proper installa tion of the sun shroud assembly Quantity Item 6 Washer Internal Star 10 SS Part ZHIOLWSIS 6 Screw 10 32 x 2 Pan Hd Phil SS Part ZH10 32X2 00SPP 6 Spacer 5 16 DIA x 1 5 L 10 Clear Part SPA8549 Note Use the six 10 32 UNC nuts and flat washers provided with the enclosure assembly not included in this package PELCO 300 W Pontiac Way Clovis CA 93612 5699 e USA e 800 289 9100 or 1 559 292 1981 FAX 800 289 9150 or 1 559 292 3827 DataFAX 800 289 9108 or 1 559 292 0435 4 0 INSTALLATION 3 Align the screw holes in the sun shro2. er expressed or implied warranty condition or guarantee by PELCO of the equipment listed herein PELCO makes no warranties except for intended use and will not be liable for any loss damage or costs arising whether conse quential or incidental from the use of said merchan dise This warranty gives you specific legal rights You may also have additional rights which are subject to varia tion from state to state If a warranty repair is required contact PELCO at 800 289 9100 or 559 292 1981 for a Repair Authorization number RA and provide the following information 1 Model and serial number Date of shipment P O number Sales Order number or PELCO invoice number 3 Details of the defect or problem If there is a dispute regarding the warranty of a product which does not fall under the warranty conditions stated above please include a written explanation with the product when returned Ship freight prepaid to PELCO 300 West Pontiac Way Clovis CA 93612 5699 Method of return shipment shall be the same as method by which the repair item is received by PELCO PELCO Manual C410M 9 94 RETURNS In order to expedite parts returned to the factory for repair or credit please call the factory at B00 289 9100 or 559 292 1981 to obtain an authoriza tion number CA number if returned for credit and RA number if returned for repair Goods returned for repair or credit should be clearly identified with the a
3. ssigned CA RA number and freight should be pre paid All merchandise returned for credit may be sub ject to a 20 restocking and refurbishing charge Ship freight prepaid to PELCO 300 West Pontiac Way Clovis CA 93612 5699 PELLO PELCO 300 West Pontiac Way Clovis CA 93612 5699 559 292 1981 800 289 9100 FAX 800 289 9150 or 559 292 3827 DataFAX 800 289 9108 or 559 292 0435 Product specifications subject to change without notice C410M PELCO Manual C410M 9 94
4. ud and en closure lid To install the sun shroud perform the following steps Note The sun shroud can be aligned in 1 Unclamp the enclosure lid and remove either direction and fits over the top of the enclosure and vent cap s 2 Remove the six 6 screws from the enclosure lid 4 Install the screws with the spacers as illustrated in Figure and tighten SUN SHROUD SCREW FLAT WASHER SCREW HOLE R lt SPACER ee A STAR WASHER Figure 1 Sun Shroud Assembly Diagram 2 PELCO Manual C410M 9 94 5 0 WARRANTY AND RETURN INFORMATION WARRANTY PELCO will repair or replace without charge any merchandise proved defective in material or workman ship for a period of one year after the date of shipment six months on all pan and tilts with auto scan and medium duty scanners and two years on Legacy Intercept and CM9500 CM8500 Matrix products PELCO will warranty all replacement parts and repairs for 90 days from the date of shipment All goods for warranty work shall be sent freight prepaid to our Clovis California facility Repairs made necessary by reason of misuse alteration normal wear or accident are not covered under this warranty PELCO is not liable for any incidental or consequential expenses or liability incurred by the customer as a result of field repair installation or any other reason The above warranty is in lieu of any oth
Download Pdf Manuals
Related Search