Home
Olympus SHV-1 User's Manual
Contents
1. D mm 2 8 x 4 6 x 1 0 in Approx 410 g 14 5 oz excluding the protective cap FS AC2 100 to 240 V AC 50 60 Hz 27 VA 100 V to 36 VA 240 V 12 V DC 1 0A 0 C to 40 C operation 20 C to 70 C storage 40 W x 30 H x 105 D mm 1 6 x 1 2 x 4 1 in Approx 140 g 4 9 oz excluding the power cord Specifications are subject to change without any notice or obligation on the part of the manufacturer Technical Support USA 24 7 online automated help http www olympusamerica com E1 Phone customer support Tel 1 800 260 1625 Toll free Our phone customer support is available from 8 am to 10 pm Monday to Friday ET E mail e slroro olympusamerica com European Technical Customer Support Please visit our homepage http www olympus europa com or call NUMBER 00800 67 10 83 00 Toll free 49 0 1805 67 10 83 or 49 0 40 23 77 38 99 Charged OLYMPUS http www olympus com OLYMPUS CORPORATION Shinjuku Monolith 3 1 Nishi Shinjuku 2 chome Shinjuku ku Tokyo Japan Customer support Japanese language only Tel 0426 42 7499 Tokyo OLYMPUS AMERICA INC Two Corporate Center Drive Melville NY 11747 3157 U S A Tel 631 844 5000 Technical Support USA 24 7 online automated help http www olympusamerica com E1 Phone customer support Tel 1 800 260 1625 Toll free Our phone customer support is available from 8 am to 10 pm Monday to Friday ET E Mail e
2. leak and or electric shock When using this product to recharge the BN 1 battery pack always power the AC adapter with the supply voltage specified in this instruction manual Do not use this product near heat generating equipment This could damage the external finish or melt the coating and result in fire overheating explosion fluid leak or electric shock Always insert the plug of the AC adapter fully into the power outlet Do not use it while the plug is inserted only halfway WARNING E Do not touch this product or the battery for too long when it is charging This could result in low temperature burns to your skin QOOA YW OW E Do not use the power supply power cord or battery if is damaged To avoid electric shock or injury do not touch any exposed internal parts If the product is damaged unplug the power cord and do not use it For repair contact Olympus E if you notice any abnormalities such as leakage discoloration deformation overheating or odor immediately unplug the power cord and stop using the equipment Continued use may result in fire hazard fire ignition overheating and or explosion For repair contact Olympus To avoid fire overheating explosion or leakage do not subject the battery to excessive shock throw it or otherwise damage it Never put the battery in a microwave oven or high pressure container This could cause a fire leakage over heating or an explosion Always keep the battery
3. out of reach of children Children should only be permitted to use the battery under strict adult supervision If children are not supervised There is a risk of electric shock injury or swallowing If the battery leaks or emits a burning odor keep it away from heat sources Leaked fluid may catch fire causing the battery to smoke burn or explode If the fluid from inside the battery sticks to your skin or clothes it may cause injury Wash it off immediately with clean water and see a doctor If charging does not complete in the specified charge time stop charging to prevent fire overheating or explo sion When recycling or disposing of the battery insulate all terminals by covering them with plastic tape Otherwise the batteries could be short circuited and cause a fire overheating or explosion To recycle a battery take it to the nearest dealer participating in the recycling activities For disposal follow the regulations set by your local government J CAUTION If charging does not complete in the specified charge time stop charging to prevent fire overheating or explo sion SSQQVVA YY Do not shake this product when a battery is attached The battery could pop out and cause injury Do not place a heavy object on this product or power cord Do not place this product on an unstable surface such as a tilted or unsteady table If the High Voltage pack falls off it may be damaged or cause injury Do not store o
4. OLYMPUS Flash High Voltage Set SHV 1 EN Instructions i 12 Thank you for purchasing the OLYMPUS Flash High Voltage Set SHV 1 This is an external flash power supply for exclu sive use with OLYMPUS digital cameras To ensure your safety please read this instruction manual before use and keep it handy for future reference SAFETY PRECAUTIONS Be sure to read and observe the following df This instruction manual uses a variety of common symbols and icons to assist you in proper handling and usage of this product properly and to warn you of potential hazards to yourself and others as well as to property These symbols and their significance are described below MANY NN e NENNE Failure to observe the Failure to observe the precautions indicated by this precautions indicated by this symbol may result in serious symbol may result in injury or death N CAUTION Failure to observe the precautions indicated by this symbol may result in injury or property damage injury or death IMPORTANT YE Disassembly Unplug power cord N Prohibited D prohibited Oo Mandatory ne from the power outlet For customers in Europe The CE mark indicates that this product complies with the European requirements for safety health environ ment and customer protection CE mark products are for sale in Europe For customers in USA FCC Notice This device complies with part 15 of th
5. e product when it is wet or when your hands are wet Do not operate this product in a damp environment Such as in a bathroom Do not insert a metallic object Such as a wire into the product or into a contact Never solder this product or attempt to repair deform modify or disassemble it Do not use this product if it is damaged leaking or wet Do not use or store this product where it may be exposed to high temperatures For example do not leave it on the dashboard of a car under direct sunlight or place it near heating equipment Do not use this product in areas where heat may accumulate such as under a cushion Do not use this product where it may be exposed to flammable gas Doing so poses a risk of fire or explosion QOWOMOWOODOO O E Do not short circuit the terminals with a metallic object When transporting or storing this product cover the terminals with the provided cap It is dangerous to carry an uncapped battery in a bag pocket etc HM Never throw this product into a fire or put it near a fire When unplugging the AC adapter from a power outlet hold it by the plug Do not pull it out by the cord Do not bend or pull the cord excessively or place a heavy object on it Damage to the cord may result in fire ignition overheating and or electric shock When unplugging the AC adapter from a power outlet hold it by the plug Do not pull it out by the cord Damage to the cord may result in fire ignition overheating fluid
6. e BN 1 Ni Mh Battery Pack with the claw on the lower part of the HV 1 and fit the upper part of the BN 1 Ni Mh Battery Pack into the release lever on the HV 1 so that it clicks Make sure the battery pack is attached firmly 4 When detaching the BN 1 Ni Mh Battery Pack be sure to set the power switch to OFF and then lift the release lever Recharging the battery pack 4 1 Set the HV 1 power switch to OFF CHARGE Charging is impossible if the power switch is set to ON Remove the cover 2 Push the BN 1 Ni Mh Battery Pack power indicator button palora connection and check the remaining battery capacity 3 Attach the BN 1 Ni Mh Battery Pack to the HV 1 4 Connect the AC power cord to the input side of the AC 2 AC Adapter and connect the other end of the AC power cord to a power outlet 5 Connect the connection plug of the AC 2 AC Adapter to the DC IN terminal of the HV 1 Remove the terminal cover before connection 6 Charging is complete when the indicator lamp on the HV 1 lights in green Charging Status Exinguished Red lighting Battery being charged Green lighting Battery charging completed Red blinking Charge error Time out or temperature error E Notes e New batteries or batteries that have not been used for a long time more than one month may not be fully charged This is not a malfunction but is a characteristic of the battery Charge them two or three times before using them for the first ti
7. e FCC rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Any unauthorized changes or modifications to this equipment would void the user s authority to operate For customers in CANADA This Class B digital apparatus complies with Canadian ICES 003 DANGER WE Use this product only in combination with the equipment specified in this manual e This product can only be used with flash systems designed exclusively for OLYMPUS digital cameras Do not use it with non Olympus flash systems e This product has been designed for exclusive use with the OLYMPUS BN 1 Ni MH Battery Pack Do not use it with a dry cell battery or a non designated rechargeable battery e Use only the designated flash connection cable e The AC 2 AC adapter provided with this product is the only AC adapter that can be used with this product Do not use any other AC adapter with this product Similarly the provided power cord is the only power cord that can be used with this product Do not use this product for any purpose other than as a flash power supply For example do not use it as a general DC power supply Do not use the provided AC adapter to supply power to other products Never expose this product to water or moisture including rain seawater and animal urine Do not handle th
8. explosion or leakage Service life of rechargeable battery pack The performance of the battery degrades gradually after repeated charge and discharge When the operation time reduces considerably this may be the sign of replacement timing The battery capacity is usually halved after about 500 cycles of charging and discharging though this value is variable depending on the operating conditions Recycling the battery Please recycle BN 1 batteries to help save our planet s resources When you throw away dead batteries be sure to cover their and terminals and always observe local laws and regulations Battery Charging Precautions Before use Be sure to read the safety precautions thoroughly before use Follow all instructions carefully Operating precautions The optimum ambient temperature for charging is between 10 C and 30 C 50 F and 86 F The battery may get hot for example immediately after the flash is used The battery may not fully recharge if it is hot so wait until the battery cools down before recharging it The battery charger and battery get hot during charging This is not a malfunction Interference with TV or radio reception may occur during charging This is not a malfunction To avoid this move the charger further away from the device being interfered with Even within the specified operating temperature range battery operation time decreases as the temperature drops When the tempera
9. fee toime 400 times AA R6 Ni Mn a a ZR6 eeso ne 400 times Approx 1 sec CR V3 E Orr imee LB 01 lithium battery pack fee ohm 400 times AA R6 Ni Cd Pe te ee 1000 mAh oe 370 times AA R6 Ni Mh AA R6 Ni Mh battery 1900 mAh 1900 mAh Approx 450 times 450 times W Notes e Up to 10 successive full flashes are permitted After 10 flashes the flash should not be used for more than 10 minutes to allow the light emitting surface to be left cooled e Charging times and flash count data were obtained from Olympus in house testing 19 20 HV 1 Model No Power source Output Charge time Ambient temperatures Dimensions Weight BN 1 Model No Nominal voltage Nominal capacity Ambient temperatures Charge discharge count Dimensions Weight AC 2 Model No Rated input Rated output Ambient temperatures Dimensions Weight Main specifications FS HV1 Ni Mh Battery Pack BN 1 6 V 330 V Approx 10 hours with the BN 1 0 C to 40 C operation 20 C to 60 C storage 110 W x 149 5 H x 53 5 D mm 4 3 x 5 9 x 2 1 in excluding the strap belt loop and connection cable Approx 320 g 11 3 oz excluding the connection cord FS BN1 7 2 V DC 2600 mAh 0 C to 40 C charging 10 C to 60 C operation 20 C to 30 C storage Approx 500 cycles variable depending on operating conditions Approx 71 W x 117 H x 25
10. me or when they have not been used for a long period e Once battery charging starts it is recommended to continue charging until the battery has been fully charged without stopping charging in the middle The remaining battery capacity cannot be indicated correctly unless the battery is charged fully e Whenever possible use the battery until it has been fully discharged Repeatedly recharging the battery before it has been fully used up may reduce the battery s service life e In the following cases immediately unplug the power cord from the wall outlet and contact Olympus e if recharging does not complete in 10 hours e if the indicator lamp blinks in red while the battery pack is attached correctly as described in this manual 17 Connection to the flash system This product has been designed exclusively for use with the OLYMPUS digital camera electronic flash system 1 Set the HV 1 power switch to OFF 3 Remove the protective cap before connection 2 Connect the connection cable to the connection cable ter minal of the HV 1 as shown 3 Connect the other end of the connection cable to the ex ternal power supply connector of the electronic flash Memo After removing the protective cap from 2 Remove the cover before the electronic flash store the cap in connection 5 the protective cap storage position of the HV 1 as shown E Note e When plugging or unplugging the connection cable always h
11. ng period Check that the battery terminals are clean before use If they are dirty contact failure may cause problems with charging or shorten the battery s operation time after charging Care Clean the battery by wiping it with a soft dry cloth Never use a wet cloth alcohol lacquer thinner benzene or detergent Operating temperatures Use this battery pack within a temperature range of 10 C and 60 C 14 F and 140 F Even within the specified operating temperature range battery operation time decreases as the temperature drops When the temperature is low it is recommended to carry a spare charged battery and keep it warm in a pocket bag etc When carrying a battery in your pocket be sure to cap the battery to prevent short circuiting Do not put anything else in the pocket with the battery Precautions for transport and storage Do not leave the battery in the HV 1 High Voltage Pack Even when the power switch is set to off a small amount of current continues to flow and may lead to a decrease in battery performance When not using the battery attach the provided cap and store it in a cool dry place with a temperature between 15 C and 25 C 89 F and 77 F When transporting or storing the battery attach the provided cap to prevent short circuiting of the terminals Do not put any metallic objects including personal ornaments in a bag or drawer with the battery This could cause a fire overheating
12. old the plug Do not pull it by the cord Turning the flash system on 1 Set the HV 1 power switch to ON 2 Set the electronic flash power switch to ON 3 Check the status of the indicator lamp on the HV 1 Memo Always turn the HV 1 on before turning the electronic flash on Since the HV 1 supplies control power to the electronic flash the electronic flash can be used without the battery pack In this case however note that battery charge time increases e When using the HV and the flashing count decreases 1 keep it in the hard case to protect the attached battery HE Note pack e If the indicator lamp blinks in red while the battery pack is attached correctly as described in this manual unplug the power cord from the wall outlet and contact Olympus 18 Remaining battery capacity indication The power remaining in the BN 1 Ni MH Battery Pack can be confirmed by pressing its power indicator button Lamp Status Battery Condition E Note e The remaining battery capacity indication shows merely a reference The lamp status is subject to change due to various conditions Charge time and flashing count The following table shows the battery charge time and the number of flash operations available when different batteries are used on the FL 50 Electronic Flash Battery used in FL 50 Flash interval AA R6 alkaline Cr LR6 oan oie 400 times AA R6 lithium AA P6 lithium battery LR6 sd LR6
13. r use this product where it may be exposed to moisture excessive dust or high temperatures Remove dust from the power plug before inserting it into a power outlet The battery will get hot after extended use in HV 1 High Voltage Pack To prevent burns do not remove the battery from the HV 1 immediately after use Do not charge the battery in an extremely cold or hot environment Charging the battery in temperatures between 10 C and 30 C 50 F and 86 F is recommended Using the battery in low temperatures may result in a decrease in battery performance QO VIOOUVS 13 14 excessively or place a heavy object on it Damage to the cord may result in fire ignition overheating and or electric shock Mi When unplugging the power plug hold the plug Do not pull it by the cord Also do not bend or pull the cord Q E Unplug the power plug from the power outlet except when recharging the battery Z OPERATING PRECAUTION At time of purchase The battery discharges even when it is not used After purchasing the battery be sure to charge it before use Also whenever the battery has not been used for a long period recharge it before use New batteries or batteries that have not been used for a long time more than one month may not be fully charged This is not a malfunction but is a characteristic of the battery Charge them two or three times before using them for the first time or when they have not been used for a lo
14. slroro olympusamerica com Olympus software updates can be obtained at http www olympusamerica com E 1 Olympus Europa GmbH Premises Goods delivery Wendenstrasse 14 18 20097 Hamburg Germany Tel 49 40 23 77 3 0 Fax 49 40 23 07 61 Letters Postfach 10 49 08 20034 Hamburg Germany European Technical Customer Support Please visit our homepage http www olympus europa com or call our TOLL FREE NUMBER 00800 67 10 83 00 for Austria Belgium Denmark Finland France Germany Italy Luxemburg Netherlands Norway Portugal Spain Sweden Switzerland United Kingdom Please note some mobile phone services provider do not permit access or request an additional prefix to 800 numbers For all not listed European Countries and in case that you can t get connected to the above mentioned number please make use of the following CHARGED NUMBERS 49 180 5 67 10 83 or 49 40 237 73 899 Our Technical Customer Support is available from 9 am to 6 pm MET Monday to Friday 2003 OLYMPUS CORPORATION VT481903
15. ture is low it is recommended to carry a spare charged battery and keep it warm in a pocket bag etc When carrying a battery in your pocket be sure to cap the battery to prevent short circuiting Do not put anything else in the pocket with the battery Care Clean the battery by wiping it with a soft dry cloth Never use a wet cloth alcohol lacquer thinner benzene or detergent Overseas use if you plan to use this product in another country you may need to obtain a conversion plug matching the design of power outlets used in that country Check with a travel agent to determine whether or not you will need a converter Do not use an electronic transformer as this will cause a malfunction Contents e Checking the package contents iin 20ceheradccmanpencioencs neetecnandetemenpancead sanehawbaaenmsnraatcuushswinanempieienreautonseant 15 NOMEG noeng a a EEA AE a 16 e Attaching detaching the battery pack cc ccaacatecenaeanedjaashaensurseneimstgncenatnad aapsewes donna aomeamunanvdoansantaes 17 Recharging he Dattery PACK srecaesieeteaccectssxncescte rsecceaitnesnsntzencetvasdsecencenensxsessedsadnndencusiaendeateadtadecexs 17 e Connection to the flash system ov xewisectitneidetinesaiin as ewenesitcawaiuvecinhousousiseadeiee wi Suave vine adeduabedseuveussedededuesiats 18 e Turning the flush system on seccrepucesieededsancentedunspeeuasadnacsetabeenmerisotcasaadeateneteemenaseattextsswosantenesaanisate ea 18 e Remaining battery capacit
16. y indication s cciwaicedsvscisdcdancaneuestonca rise eaveacuucasrsenceadsadeniensncteasiamceaunnioeie 19 e Charge time and flashing count scircepsincaescasnacsdevasiwireudianradvessascuuennabdeadeadensiuevansdedbabaaieasapmuesedeedeans 19 Main Sp ciicali nS sosssidiin endirin aaia aa EEEE de EOP AA TEETAN EANTA 20 Checking the package contents Before using this product for the first time check that all of the provided items are present in the package If any item is missing or damaged please contact your dealer High Voltage Pack Ni Mh Battery Pack Connection cable Hard case 15 e High Voltage Pack HV 1 Power switch Indicator lamp Protective cap storage position DC IN terminal Release lever Connection cable terminal Strap attaching position e Ni Mh Battery Pack BN 1 e AC Adapter AC 2 Protective cap Connection plug a DA Power indicator lamp Power indicator button e Always attach the protective cap be fore storage AC power cord e Plug the AC cord in firmly 16 Attaching detaching the battery pack 1 Remove the protective cap from the BN 1 Ni Mh Battery Pack 2 Set the HV 1 power switch to OFF NOTE If the battery pack is attached while the power switch is ON the indicator lamp blinks in red and the HV 1 does not function 3 Attach the BN 1 Ni Mh Battery Pack to the HV 1 as described below Align the groove at the bottom of th
Download Pdf Manuals
Related Search
Related Contents
取扱説明書ダウンロード REK 1840/1 Artikel-Nr.: 4501563 Komponenten / Ersatzteile Watco FLEX924-PP-PVC-CP Instructions / Assembly OM, 123 HD60, 123 HD65 X-series, EPA, 2006-11 Descargar ficha técnica STR-DH130 - Sony Europe FAQs Copyright © All rights reserved.
Failed to retrieve file