Home

Nuance comm Webcam D60707-18 User's Manual

1. Configuration SafeCom Server Group name TCP port gt 7800 L Server address 172 16 7 81 _ Move up Move down L Add server Device F Device name gt Canon iR ADV C5030 55 10 F Device model gt Canon iR ADV C5030 55 10 F Device location Contact person F Login method Auto sense F F Default domain F Pre fill domain gt Blank FID code Mask ID code F PIN code Login without PIN code F Drivers Add driver Post track 7 F Copy track 7 Email track Fax track F High speed print Encryption Apply Asymmetric key max length gt Default X L Symmetric key max length Default M Restore factory default The SafeCom Server section is used to specify the SafeCom server Enter Group name TCP port default is 7500 and Server address in Add server See also 2 8 2 Note After you click Apply you should allow one minute before the changed SafeCom Server settings take effect Otherwise you may get a login error at the MFP D60707 18 18 2 SafeCom Go Canon Device name and Device model are automatically filled in Device location and Contact person are useful for maintaining the SafeCom solution Fill out the Configuration web page according to the following descriptions Login method o Auto sense default If a USB ID device is connected to the MFP then Card or Windows is selected If no USB ID device is detected then ID code is selected The Auto sense selectio
2. A Device does not support IMI and hence the copy process cannot be stopped when the user runs out of credits 1 3 SafeCom Go Canon products Identification by card requires a USB SafeCom ID Device card reader and the Canon MFP must feature an available USB port SafeCom Go Canon On older Canon MFPs a Canon USB Application Interface Board may be required Refer to information in the USB column in Table 1 1 4 SafeCom ID devices ID Device Connection SafeCom AWID Reader USB SafeCom Barcode Reader USB SafeCom Casi Rusco Reader USB SafeCom Cotag Reader USB SafeCom EM Reader USB SafeCom HID Prox Reader USB SafeCom HID Prox Reader 37 bit custom USB SafeCom iCLASS Reader USB SafeCom Indala Reader 26 bit USB SafeCom Indala Reader 29 bit USB SafeCom loProx Reader USB SafeCom Legic Reader USB SafeCom Magnetic Card Reader DD Tr 1 USB SafeCom Magnetic Card Reader DD Tr 2 USB SafeCom Magnetic Card Reader DD Tr 3 USB SafeCom Mifare Reader USB SafeCom Nedap Reader USB SafeCom NetWatch USB Note D devices require unique ID Device Licenses SafeCom ID devices come with ID device licenses whereas ID device licenses for 3 party ID devices must be purchased separately Additional information about the ID devices is available in SafeCom G4 Administrator s Manual D60650 D60707 18 7 1 Introduction 1 5 1 6 D60707 18 Available docu
3. Com Nuance SafeCom Go Canon Administrator s Manual a a NUANCE Trademarks Nuance the Nuance logo SafeCom SafeCom Go SafeCom P Go SafeCom ePay and the SafeCom logo are trademarks of Nuance Communications Inc or its affiliates in the United States and or other countries All other trademarks referred to herein are the property of their respective owners Nuance Communications Inc cannot be held responsible for any technical or typographical errors and reserves the right to make changes to products and documentation without prior notification Third Party Software This software may contain third party software which requires notices and or additional terms and conditions Such required third party software notices and or additional terms and conditions are located in the SafeCom Third Party Notice document Patent Nuance Communications Inc has received the following British patent GB 2350 713 B US patent US 6 952 780 B2 and Europe EUR EP1 120 701 Copyright 1995 2013 Nuance Communications Inc All rights reserved Nuance Communications Inc Lautrupvang 12 DK 2750 Ballerup Denmark Phone 45 4436 0240 E mail safecom_info nuance com Web safecom eu Table of Contents 1 troduction sasse oseanen aa rae sdeceablegdceadid phclea dea susemisedeiesauadswe aes 4 1 1 SafeGom Go Canos seere niset erres Erra EES ENNES EES EEEE E E 4 1 2 R q irementS peor eir nea E E E N E a E 4 1 3 SafeCoM Go Canon prodUCt
4. Login with card and PIN code 1 Use card reader 2 Tap PIN code on the touch screen 3 Enter PIN code and tap OK 4 Tap OK or press the ID button D60707 18 31 3 Using SafeCom Go Canon Login with ID code 1 Tap ID code on the touch screen If the ID code is numeric only you can enter the ID code on the numeric keypad 2 Enter ID code on the screen and tap OK 3 Tap OK or press the ID button Login with ID code and PIN code Tap ID code on the touch screen Enter ID code and tap OK Tap PIN code on the touch screen Enter PIN code and tap OK Tap OK or press the ID button ee Login with Windows If Login method is Card or Windows it is possible to login by either using your card or entering your Windows login credentials Tap Username and enter Username on the touch screen Tap OK Tap Password and enter Password on the touch screen Tap OK Tap Domain and enter Domain on the touch screen Tap OK Tap OK KRWN Note Username and Password cannot be blanks Main Menu S Select a function Show All D System Management Mode er tog out D60707 18 32 3 Using SafeCom Go Canon D60707 18 Guest Login Use card or enter code to login _ 1 Tap Guest button on the SafeCom Go login screen to access for example the Copy function without having to be authenticated by SafeCom Go Note This feature is NOT available on Canon imageRUNNER ADVANCE series that has
5. Open a web browser and enter the IP address of the MFP in the address field followed by 8000 Example http 172 16 6 55 8000 Use of JavaScript Active Scripting must be enabled in the browser Click Settings Registration Click User management Click System Manager Contact Person Information Settings Check Set ID and PIN Enter System Manager ID Enter System PIN and repeat the entered PIN in the Confirm field Click OK The Log In web page appears If SafeCom Go is installed the web page is provided by SafeCom See also 2 7 1 Log In System Manager ID System PIN A general user can log in without entering the System Manager ID and System PIN Administrator Login General User Login Configure the timeout The user is automatically logged out according to the printer s Auto Reset Time or Auto Clear Time on older models 1 2 3 4 Open a web browser and enter the IP address of the MFP in the address field followed by 8000 Example http 172 16 6 55 8000 Use of JavaScript Active Scripting must be enabled in the browser Click Settings Registration Click Timer Energy Settings Change the Auto Reset Time and click OK On older models 1 oe Open a web browser and enter the IP address of the MFP in the address field followed by 8000 Example http 172 16 6 55 8000 Use of JavaScript Active Scripting must be enabled in the browser Click Add Func Click C
6. USB Use p n to order from Canon imageRunner ADVANCE C2000 Series C2020 C2020F C2020H C2020i C2020L C2025 C2025H C2030 C2030F C2030H C2030i C2030L C2220 C2220F C2220i C2220L C2225 C2225i C2230 C2230F C2230 imageRunner ADVANCE 4000 Series 4025 4035 4045 4051 imageRunner ADVANCE C5000 Series C5030 C5030F C5030i C5035 C5035F C5035i C5045 C5045F C5045i C5051 C5051F C5051i USB Device Port B1 p n 3720b001AA imageRunner ADVANCE C5000 Series C5235 C5235F C5235i C5240 C5240F C5240i C5250 C5250F C5250i C5255 C5255F C5255i imageRunner ADVANCE 6000 Series 6055 6055i 6065 6065i 6075 6075i 6255 6255i 6265 6265i 6275 62751 imageRunner ADVANCE C7000 Series C7055i C7065i C7260 C7260i C7270 C7270i C7280i imageRunner ADVANCE 8000 Series 8085 8095 8105 8205 8205 PRO 8285 8285 PRO 8295 8295 PRO imageRunner ADVANCE C9000 Series C9065 PRO C9075 PRO C9270 PRO C9280 PRO Note SafeCom Go Canon does not support Canon devices that use Fiery Controller 1 Introduction D60707 18 Canon MFP USB Use p n to order from Canon iRC2620 iRC2620G iRC2620N iRC3220 iRC3220N Board C1 p n 9588A001AA iR2270 iR2270F iR2270G iR2870 iR2870F iR2870G iR3570 iR3570F iR3570G iR4570 iR4570F iR4570G Board D1 p n 9597A001AA Expansion Bus B1 p n 9596A001AA iR7270N iR8070 iR8570N
7. 7 4 6 Use the built in Technician account to register the device Enter the User logon default is TECH and PIN code default is 1234 7 Click Register D60707 18 15 2 SafeCom Go Canon 2 6 2 7 2 7 1 D60707 18 Display the Pull Print icon On Canon imageRunner ADVANCE series the Pull Print icon is by default added to the bottom of the list and in some cases users will need to tap Show All on the printer s control panel to see it To display bring the SafeCom Pull Print at the top perform these steps Login at the printer as a user with Administrator rights in SafeCom Tap the MEAP icon in the top right corner of the screen Tap Main Menu Button Display Settings Scroll to the bottom of the list and tap Pull Print Tap Up until Pull Print is at the desired position Tap OK OoRWN SafeCom Go Canon web interface The SafeCom Go Canon web interface integrates into the structure and design of the Canon Embedded Web Server The SafeCom Go Canon web interface consists of two parts 1 a public part namely the Information web page and 2 a password protected part Log in to the SafeCom Go Canon web interface 1 Open a web browser and type in the IP address of the MFP in the address field followed by 8000 safecom Example http 172 16 6 55 8000 safecom Use of JavaScript Active Scripting must be enabled in the browser If a System Manager is defined 2 8 8 then enter System Manager ID and Syst
8. Copy make hardcopies of scanned documents The ability to control access to copy in color can be controlled per user in the SafeCom Administrator and requires SafeCom G3 version 82 070 440 01 or higher o E mail send scanned documents as attachments to e mail FID code E Mask ID code F PIN code Login without PIN code F MFP authentication 7 Pull Print E Copy E mail F Drivers z Getall Remove 20 2 SafeCom Go Canon 2 7 4 D60707 18 High speed print Check to allow faster printing With high speed print the print speed becomes comparable to that of printing the document directly to the device Guest Login Check to allow users to tap a Guest button on the SafeCom Go login screen The Guest button gives access to for example the Copy function without having to be authenticated by SafeCom This feature is NOT available on Canon imageRUNNER ADVANCE series that has installed Canon Access Management System Kit A2 AMS e Timeout Since version S88 010 020 02 the user is automatically logged out according to the printer s Auto Reset Time on older models a k a Auto Clear Time Please refer to 2 8 9 e Encryption This section is only relevant for SafeCom G3 version S82 070 400 01 or higher Leave asymmetric encryption RSA 512 bit 1024 bit and 2048 bit and the symmetric encryption AES TwoFish 128 bit and 256 bit at Default and the device will try to honor the encryption method and size that has
9. Go Canon version S88 010 020 12 Corrected list of supported Canon models 1 2 Possible to configure Guest login 2 7 3 and 3 2 Upload log to server 2 7 5 Added section 2 8 14 HP Access Control USB proximity card reader HP M24 Revision D60707 17 SafeCom Go Canon version S88 010 020 10 Updated to reflect the introduction of SafeCom G4 Server Introduction of ID Device license Updated installation section 2 4 1 with instructions on how to prevent additional user credentials popup when sending e mail Support for the following Canon imageRUNNER ADVANCE models C2220i C2220L C2225i C2230i C5255 C5255i C5250 C5250i C5240 C5240i C5235 C5235i 6275 6275i 6265 6265i 6255 6255i C7280i C7270 C7270i C7260 C7260i 8205 8205 Pro 8295 8295 Pro 8285 8285 Pro C9280 Pro C9270 Pro Revision D60707 16 SafeCom Go Canon version S88 010 020 09 Support for imageRunner ADVANCE 4000 Series e Support use of Canon Access Management System Kit A2 AMS This is required to control the user s access rights for Copy Copy in color E mail Scan and Fax When AMS is used the Configuration web page 2 7 3 features controls for MFP authentication Revision D60707 14 SafeCom Go Canon version S88 010 020 08 Support for Mask ID code 2 7 3 Explain how to log in when a System Manager is defined 2 7 1 and how to define a System Manager 2 8 8 By defining a System Manager gives control of who can acc
10. Log and make sure that Display Job Log is selected 38 5 Regulatory information 5 Regulatory information WARNING NOTE This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help CAUTION Changes or modifications not expressly approved by SafeCom a s could void the user s authority to operate this equipment according to part 15 of the FCC rules This equipment generates uses and can radiate radio frequency energy and if not installed
11. available PUK codes the user gets the Login to register card dialog To abort the registration of the card tap Cancel in this dialog Login to register card safecom local a Tap User name and enter User name on the touch screen Tap OK Tap Password and enter Password on the touch screen Tap OK Tap Domain and enter Domain on the touch screen Tap OK Tap OK or press the ID button kwh Note User name and Password cannot be blanks D60707 18 37 4 Troubleshooting 4 2 4 3 D60707 18 Troubleshooting SafeCom Go Canon device trace facility Use the Mail to SafeCom Support button on the SafeCom Go Canon Information web page 2 7 2 to collect information from the device The SafeCom Go Canon log facility is also useful in troubleshooting situations but it should only be enabled upon request from SafeCom support personnel The log facility is enabled on the SafeCom Go Canon Log web page 2 7 5 SafeCom Help Desk Assistant We want your SafeCom solution to be one that reduces not only print costs but is also easy to support The most common problems reported by end users have been compiled into an online SafeCom Help Desk Assistant available at safecom eu help SafeCom scan jobs not tracked If SafeCom scan jobs are not tracked check the device s settings on the Canon imageRunner Advance webpage Go to the Settings Registration page click Management Settings and then Device Management Find the Display
12. been specified on the server while at the same time taking the processing power and memory of the device into consideration e Restore Click to set all settings to their default value Register web page The Register web page is used to register the device with the SafeCom server Bacom Register Register Device F User logon L PIN code gt The MFP can be used with SafeCom once it has been registered with the SafeCom server 1 Enter the User logon and PIN code of a user with Technician or Administrator rights The user must have a PIN code 2 Click Register Note You can use the built in Technician account TECH with the default PIN code 1234 Alternatively this can be accomplished when a user with Technician or Administrator rights has been identified at the MFP 21 2 SafeCom Go Canon 2 7 5 Log web page The Log web page allows enabling disabling and viewing of logging information FELGCOoMm Log _ Confi i Clear log l Show complete Log Logging should only be enabled if advised to do so as part of a troubleshooting process 1 Click Enable to start logging 2 Click Disable to stop logging text changes on the button When the log file reaches the 512 Kb maximum the log file is overwritten with new data If Upload log to server is enabled the device will upload the log to the server once an hour The feature should only be enabled as per instruction by SafeCo
13. function Check for updates Alternatively a software package can be downloaded 1 Download the safecom_go_canon_nnn exe file from the link supplied to you 2 Double click the safecom_go_canon_nnn exe file 3 Click Next 4 Choose the destination folder Click Next Normally the destination folder is C Program Files SafeCom SafeComG4 device_software Click Install Click Finish oO ul Specify SafeCom Server 1 Open the Configuration web page 2 7 3 SafeCom Server Apply Group name F TCP port gt 7500 L Server address 172 16 7 81 Move up Move down Remove L Add server Add 2 Enter the Server address hostname or IP address in Add server and click Add In a multi server solution you can click the Move up and Move down button to prioritize the order in which the servers are contacted in case the first one on the list becomes unavailable 3 Click Apply Note After you click Apply you should allow one minute before the changed SafeCom Server settings take effect Otherwise you may get a login error at the MFP 24 2 SafeCom Go Canon 2 8 3 2 8 4 2 8 5 2 8 6 2 8 7 D60707 18 Register device 1 Open the Register web page 2 7 4 2 Use the built in Technician account to register the device Enter the User logon default is TECH and PIN code default is 1234 3 Click Register Alternatively the device can be registered when a user with Technician or Admi
14. installed Canon Access Management System Kit A2 AMS The Guest button is available if Guest Login is checked on the SafeCom Go Configuration web page 2 7 3 33 3 Using SafeCom Go Canon 3 3 Pull Print A Pull Print John Smith 2 Doc 77 30 Credits 4 0 15 Microsoft Word MyLetter 4 0 45 Microsoft Word MyDocument a gt Copies Sp John Smith 2 Doc 77 30 Credits ee Log Out In the above example the preceding R shows the document is retained The 0 15 is the cost of the document A delegated document will have a preceding D Tap the Info button to see information about who delegated the document A group print document will have a preceding G Tap Print all to print all documents excluding any retained documents Documents are printed in chronological order oldest first e Tap Print to print the selected documents Tap Retain if you want the selected documents to remain on the list server after they have been printed Tap Delete to delete the selected documents Tap Info to see information about the selected documents including cost driver name use of color and duplex Tap Logout to logout e Tap Refresh to update the list of documents with pending documents that has finished spooling after the user logged in Use the physical keypad to enter the number of Copies you want of the selected documents Press the C button to reset copies to 1 e Press the Ag Main Menu button to select ot
15. 1 Keri UID RDR 6K8X Compatible F802 Keri 26 Bits F902 loProx Kantech FA02 Awid FB01 DIGITAG EM Marin EM410x Rosslaire Primary RDR 6E8X Compatible D60707 18 28 2 SafeCom Go Canon FBO2 EM Marin EM410x Rosslaire Alternate FCO2 Casi Rusco FDO1 Indala ASP UID Motorola No Script used raw data is returned FDO2 Indala ASP 26 Bit Motorola Indala 26 bit script used 2 9 2 9 1 D60707 18 Uninstall SafeCom Go Canon Please refer to the appropriate section e Canon imageRunner ADVANCE series 2 9 1 Older Canon devices 2 9 2 Canon imageRunner ADVANCE series 1 Open a web browser and enter the IP address of the MFP in the address field followed by 8000 sms Example http 172 16 6 55 8000 sms Use of JavaScript Active Scripting must be enabled in the browser 2 Enter Password The default SMS password is MeapSmsLogin 3 Click Log In Stop and uninstall SafeCom Go 4 In the browser click MEAP Application Management in the left menu 5 Select SafeCom Go and click Stop When it has stopped click Uninstall 6 When the Confirm page appears click Yes to uninstall SafeCom Go Change Login Service to Default Authentication 7 Click Enhanced System Application Management in the left menu 8 In the Login Service section select Default Authentication Click SWITCH Restart the MFP 9 On the control panel press and hold the power button to restart the MFP
16. 38 Regulatory informati n sisikian esinaine sina ar aaisa 39 a E E E E E E E scree 40 1 Introduction 1 Introduction 1 1 SafeCom Go Canon SafeCom Go Canon is the internal solution for Canon MFPs It integrates with the touch screen control panel of the Canon MFP and offers user authentication by code and or card SafeCom Go Canon works together with the SafeCom G4 Server software and is designed to help companies and organizations gain control over their printing costs and document security The SafeCom solution can be enhanced with add on modules to build customer specific and scalable solutions 1 2 Requirements SafeCom Go Canon supports the MEAP enabled Canon MFPs in Table 1 The MFPs are listed in order of release with the latest at the bottom Built in USB port for connection of USB ID Device is featured on all newer MFPs Older MFPs may require a Canon USB Application Interface Board type B1 D1 or G1 and or any additional Canon hardware e MFP must be connected to the network The MFP should set department ID as off The MFP should not have system administrator setting e SafeCom device license and Canon MEAP License royalty fee paid to Canon e Canon Access Management System Kit A2 AMS is required to control user s access rights for Copy Copy in color E mail Scan and Fax D60707 18 4 1 Introduction D60707 18 Table 1 SafeCom Go Canon supported Canon MFPs Canon ADVANCE MFP N
17. Board D1 p n 9597A001AA iR9070 iR85 Expansion Bus A1 p n i1R105 IR105i 6909A001 AA iR5070 Board D1 p n 9597A001AA iR5570 iR5570N iR6570 iR6570N Expansion Bus A1 p n 6909A001AA iRC2570 iRC2570C iRC2570Ci iRC2570F iRC2570i iRC2580 iRC3170 iRC3170C iRC3170Ci iRC3170F iRC3170i iRC3170U iRC3180 iRC3180i iR7086 iR7086B iR7086N iR7095 iR7095i iR7095P iR7105 iR7105B iR7105i iRC5058 iRC5068 iRC5870 iRC5870i iRC5870N iRC5870U iRC5880 iRC5880i iRC5880N iRC6870 iRC6870i iRC6870N iRC6870U iRC6880 iRC6880i iRC6880N iRC3880 iRC3880F iRC4080 iRC4080i iRC4580 iRC4580F iRC4580i iRC5180 iRC5180i iRC5180N iRC5185 iRC5185i iRC5185N imagePRESS C1 iRC2880 iRC2880F iRC2880i iRC3380 iRC3380F iRC3380i iR3025 iR3025F iR3025N iR3030 iR3030A iR3030N iR3035 iR3035A iR3035F iR3035N iR3045 iR3045A iR3045F iR3045N Board G1 p n 1804B001AA Expansion Bus B1 p n 9596A001AA i1R5055 iR5055N iR5065 iR5065N iR5075 iR5075N imagePRESS C6000 imagePRESS C6000VP imagePRESS C7000VP iRC2380i iRC2550 iRC2550F iRC2550i iRC3080 iRC3080F iRC3080i iRC3480 iRC3480i iRC3580 iRC3580F iRC3580i 1 Introduction iR3225 iR3225F iR3225N iR3230 iR3230N iR3235 iR3235F iR3235i iR3235N iR3245 iR3245F iR3245i iR3245N imagePRESS 1100 imagePRESS 1125 imagePRESS 1135
18. Canon 4 7 11 SafeCom Help Desk Assistant 38 System requirements SafeCom Go Canon 4 7 Third Party Software 1 Timeout 21 Trace facility 38 Tracking data adjustment 20 Trademarks 1 Troubleshooting 38 Update software SafeCom Go Canon 12 40 6 Index D60707 18 42
19. PIN code at login This setting applies to the device and overrules the equivalent user property on the SafeCom G4 server Drivers When Pull Printing SafeCom compares the driver name embedded in the print job with this list of driver names If no match is found the document appears with a question mark in the document list on the device This way the user is warned that fidelity is low and the document may print incorrectly o To populate the list of drivers by retrieving a list of driver names from the SafeCom server click Get all and then Apply o To add a driver name manually click Add o To remove a driver from the list select the driver name on the list and click Remove Post track Check to allow the tracking record for a Pull Print job to be adjusted to reflect the actual number of pages printed and also the number of these pages that were in color The price of the job is also adjusted Copy track Email track and Fax track This is available on devices without Canon Access Management System Kit A2 AMS o Copy track check in order to track copies o E mail track check to track E mail jobs submitted with the MFP s Scan and Send function o Fax track Check to track Fax jobs MFP authentication This is available on Canon imageRunner ADVANCE series with Canon Access Management System Kit A2 AMS You can choose if users are required to login before they can o Pull Print collect documents at any device o
20. So spse sirrin nin inie EE ENEE E S i 7 1 4 SafeCom ID deviCes r a TN S N N SN 7 1 5 Available GOCUMENTAtION ooer s ses sarrera TEINA NIEA AAEN SAIR RISE 8 1 6 About this manuals 24 5 bose scaie deere chic ee aR E AEN RAAE A RA 8 1 7 DOCUMENE Nistor ceser Gos 44a ioeina Odie nae a E 34a SASEN a 9 2 SafeCom GO Ca ONssise assins an E S cet a iaaa aT 11 2 1 OVENVICW Es oi ais en E aE AEE cea ES EAEE AAS INNEAN OE AEA saekeaded ISESE eens 11 2 2 Install optional Card redder cece ccc tske rsr KESER ERRS REKREI ENAN ERS RERS 11 2 3 Prepare MFP for installation sssssessesssssessceesessseseseseeesesseeeeeseeeee 11 2 3 1 Canon imageRunner ADVANCE Series cceeeceeeeeseeeeeeeee 11 2 3 2 Older Canon devices cccceecceecceecceeceeeceeeseeeseeeseeeseees 12 2 4 SafeCom Go Canon software installation ccceecceeeceeceeneeenceeneees 12 2 4 1 Canon imageRunner ADVANCE series cceeeeeseeeeeeeseeeee 13 2 4 2 Older Canon devices ce cece cece sce e eee eeceeeeeenceeeeeeeseeeeeees 14 2 5 Specify SafeCom Server and register device cece eee eee eee ee eee eeeeeeees 15 2 6 Display the Pull Print iCOM cceceecccceccencencencencencensencenseneensenaeess 16 2 7 SafeCom Go Canon web interface ccc ccceeccencceneeenceenceeneeeneeeneees 16 2 7 1 Log in to the SafeCom Go Canon web interface 06 16 2 7 2 Information web Page sesser tens eias aaRS 17 2 7 3 Conf
21. Uninstall SafeCom Go Login 11 In the browser click Enhanced System Application Management in the left menu 12 In the Login Service section select SafeCom Go Login Click Uninstall 13 When the Confirm page appears click Yes to uninstall login service 29 2 SafeCom Go Canon 2 9 2 D60707 18 Older Canon devices 1 Open a web browser and enter the IP address of the MFP in the address field followed by 8000 sms Example http 172 16 6 55 8000 sms Use of JavaScript Active Scripting must be enabled in the browser 2 Enter Password The default SMS password is MeapSmsLogin 3 Click Log In Stop and uninstall SafeCom Go 4 In the browser in the Application List select SafeCom Go Click Stop 5 In the Application List select SafeCom Go Click Uninstall 6 Click OK Change Login Service to Default Authentication 7 Click on the System Management tab 8 Click on the Enhanced Sys App tab 9 In the Login Service section select Default Authentication Click Select Restart the MFP 10 On the control panel press and hold the power button to restart the MFP Uninstall SafeCom Go Login 11 In the browser click on the System Management tab 12 Click on the Enhanced Sys App tab 13 In the Login Service section select SafeCom Go Login Click Uninstall 14 Click OK 30 3 Using SafeCom Go Canon 3 Using SafeCom Go Canon 3 1 Control panel Touch screen Login with card 1 Use card reader
22. and used in accordance with the instruction manual may cause interference to radio communications It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart B of Part 15 of FCC Rules which are designed to provide reasonable protection against such interference when operated in a commercial environment Operation of this equipment in a residential area is likely to cause interference in which case the user will be required to take whatever measures may be required to correct the interference at his own expense CE conformance This product has been developed and produced in accordance with the EMC directive and the Low Voltage directive and therefore carries the CE mark EMC directive This product observes the rules and regulations of the EMC directive If so required a declaration of conformity in local language stipulating the applied rules and regulations can be obtained D60707 18 39 6 Index 6 Index Access rights 20 Auto sense 19 Canon Access Management System Kit A2 AMS 20 Color copy 20 Copy in color 20 Default domain 19 Document history 9 Domain 19 Guest Login 21 33 Help Desk Assistant 38 High speed print 21 ID code 19 Idle timeout 21 Inactivity timeout 21 Install software SafeCom Go Canon 12 Login without PIN code 20 D60707 18 Manuals 8 Patent 1 Post track 20 Pre fill domain 19 Regulatory information 39 SafeCom Go
23. em PIN and click Administrator Login to access all the Canon web pages Clicking General User Login instead will give limited access where it is not possible to control management settings and restart the Canon device remotely Log In System Manager ID System PIN A general user can log in without entering the System Manager ID and System PIN Administrator Login General User Login 2 Click Configuration on the menu to access the SafeCom Configuration web page Type admin for the user name type your password default is nimda and then click OK You have to enter this regardless if a System Manager is defined 16 2 SafeCom Go Canon 2 7 2 Information web page The Information web page shows version and configuration summary 1 Click Information on the menu to access the Information web page Ecom Configuration Register Log Language Password Logout D60707 18 Information al Product Information F Version 88 010 020 06 Version date 2011 08 26 L Version time 00 00 00 System Information Group name F Server IP 172 16 7 81 L Is the log enabled Yes 2 SafeCom Go Canon 2 7 3 Configuration web page The Configuration web page is used to configure SafeCom Go Canon as to which server it should connect to how users are to be identified etc Ecom Information Configuration Register og Language Password Logout
24. ess management settings and restart the Canon device remotely Revision D60707 13 SafeCom Go Canon version S88 010 020 02 Revision D60707 12 SafeCom Go Canon version S88 010 020 02 How to display the Pull Print icon 2 6 Timeout is now controlled by the printer 2 8 9 D60707 18 1 Introduction D60707 18 Revision D60707 11 e SafeCom Go Canon version S88 010 020 01 Updated to reflect the introduction of SafeCom G3 Server e Support for imageRunner ADVANCE C2000 C8000 and 6000 Series Revision D60707 10 SafeCom Go Canon version S88 010 020 01 Support for imageRunner ADVANCE C5000 C7000 and C9000 Series Possible to reference multiple SafeCom servers 2 7 3 Tracking of Scan E mail and Fax jobs 2 7 3 Possible to pre fill and hide domain field 2 7 3 New and default login method called auto sense 2 7 3 Support for High speed print 2 7 3 Possible to specify encryption 2 7 3 when used with SafeCom G3 server Revision D60707 09 SafeCom Go Canon version S88 010 010 04 e Improved description of installation in chapter 2 10 2 SafeCom Go Canon 2 2 1 2 2 2 3 2 3 1 D60707 18 SafeCom Go Canon Overview Make sure the SafeCom G4 Server software installation has been completed as described in SafeCom Smart Printing Administrator s Quick Guide D10600 1 Install optional card reader 2 2 Prepare MFP for installation 2 3 3 Install SafeCom Go Canon soft
25. eveenceseacessss 27 2 8 14 HP Access Control USB proximity card reader HP M24 27 2 9 Uninstall SafeCoMm Go Canon cceecceecceeceeeceenceenseenseenseeeseeeseeeeeees 29 2 9 1 Canon imageRunner ADVANCE series cceeeceseeeseeeeeeees 29 2 9 2 Older Canon devices cccceecceecceecceecceceseceecseeeseeeseees 30 3 Using SafeCom Go Canon csccccsccccccccccccccccccccccccccccsccccescsceesssesessseesssses 31 3 1 Control panel sriain irinen ED nE EE EERE EEEO RS IREE ERENER ANDI RERS 31 3 2 Eae E E O E A E O E T 31 3 3 PULL PRINt2 e oteren a e aa nke eaa 34 3 4 Ea EE A E TEI E TSE E ETSE S ETS ETSE 35 3 5 Esl n isis aa EE E E E AE TEE E ON R 35 3 6 LOGOUL Sait sidsssebaderastaaisaasenaderactanlsraeenaderaabaaiseaeeaaderasanlsaaeenadonaees 36 3 7 Register c l direis istaves tiii den sveroreesteredeteddenscnsideetees gceaeeasidesuensdcuege 36 3 7 1 Register card with PUK code ssssssssssesssesesssssseeeesssssseee 36 D60707 18 2 D60707 18 3 7 2 Register card with Windows logon cceeceeeceeeceeceeees 37 Troubleshooting fiche ietie sds ccc seecs ses vencesuease ea cus veuus sotsveussedseves dedapuecssieeees ees 38 4 1 SafeCom Go Canon device trace facility ccc cece eecencceneceneeeneeeneees 38 4 2 SafeCom Help Desk Assistant esssesssssesoosssessssoossssssssosssssssesossses 38 4 3 SafeCom scan jobs not tracked ccc eece sec eeceeeceeneeenseeneeeneeeneeeneees
26. her function such as Copy On older Canon devices tap the Arrow key gt to access other MFP functions such as Copy D60707 18 34 3 Using SafeCom Go Canon 3 4 3 5 D60707 18 Copy Once logged in 3 2 tap the Arrow key gt to access the Copy function and then the Start button to copy the documents placed in the automatic document feeder ADF E mail If the E mail address of the user is known in the SafeCom solution then the user can tap Send to Myself to have the address written in the To field f Scan and Send OSE MA destinations 08 04 2010 21 27 w me Address Book One Touch gt gt Previous Favorite Settings Settings Send to Myself Auto E E color Gray ggj 300x300 dpi New Destination Auto PDF Compact 4 2 Sided Original ee ee Orin S s Dest Becc gt a Originals O Options l i John Smith 0 Doc g Scan and Send Ready to send 08 04 2010 21 28 Previous Favorite Settings p Settings Auto B E color Gray E 300x300 dpi Auto E PDF Compact as z 2 Sided Original Specify Details Delete Cc Different Size Destinations gt Dest Bec Originals Options idp John Smith 0 Doc 35 3 Using SafeCom Go Canon 3 6 Logout There is a configurable Timeout 2 8 9 that defaults to 60 seconds A user is automatically logged out if no buttons are tapped during that t
27. iguration web page ssssssssssssesessssseecesssssseeeesssese 18 2 7 4 Register WED page sssssssseseseseecesecseseseeeeeeseeeeeseeeeeeee 21 2 7 5 Log WEDAPAGe srie seidies tohra ane nanan otek dood ERAAN EENEN AEE cee 22 2 7 6 Language web page sssssesssssesoocsssssesoosesessesosesssssesoee 23 2 7 7 Password web page ssssssssseseeseseceseseeeeeseseseeseseseeeeseee 23 2 8 SafeCoMm Go Canon HOW tO cc eece sec e nce eene EEEE EEEE EEEE ENERE 24 2 8 1 Get the SafeCom Go Canon software cceeeceecceeceeeeeees 24 2 8 2 Specify SafeCom Server ssssssssssssosssssssssossssssesossssesses 24 2 8 3 R gister device aens nenir caidas E N NTRA 25 2 8 4 Set password to prevent unauthorized access sseccssses 25 2 8 5 Select login MEthOd c sccececcecceccencencenceecencensenceesees 25 2 8 6 Login with Windows without specifying the domain 25 2 8 7 Login without PIN COde cceeceeeceeeceeeceeceeeceseceseeesees 25 2 8 8 Define System Manager cceecceeceeeceeeceecescesceseeesees 26 2 8 9 Configure the tiM Out ccceecceeccesceeeceeeeeeeseenseeeeeees 26 2 8 10 Restore factory default sssssscesssssssecosssssseccosssssseeeo 27 2 8 11 Determine the VErsion ccceecceecececeeeceeeceeeceseceeeeenaes 27 2 8 12 Select SafeCom Go login as login service ec cece eee ee eee ees 27 2 8 13 Update the Version ssania ce cencaiesectieweced
28. ime To logout actively Tap Logout in the Document list dialog e Press the ID button e Use card again if a card reader is connected and you logged in by card Note If Coping is done the Logging out message is displayed until the MFP is in idle state This is required to allow correct reading of the MFP s copy page counters 3 7 Register card There are two ways the user can register a card while standing at the device Register card by entering an 8 digit PUK code 3 7 1 The PUK code must be supplied to the user in advance typically via e mail e Register card by entering Windows user logon password and domain 3 7 2 The user must have a network logon and the Login method 2 7 3 must include card 3 7 1 Register card with PUK code 1 Use card reader If the card is unknown and there is an available PUK code in the SafeCom system the user is asked to enter his PUK code Enter PUK code on the keypad or touch screen Tap PIN code and enter PIN code on the keypad or touch screen Tap PIN again and enter PIN code on the keypad or touch screen Tap OK or press the ID button gl aad saad The card is now registered with the user Please enter PUK D60707 18 36 3 Using SafeCom Go Canon 3 7 2 Register card with Windows logon 1 Use card reader If there are any available PUK codes on the system tap Cancel in the Please enter PUK dialog The Login to register card dialog appears e If there are NO
29. lder Canon devices 2 4 2 12 2 SafeCom Go Canon 2 4 1 D60707 18 Canon imageRunner ADVANCE series 1 2 3 Open a web browser and enter the IP address of the MFP in the address field followed by 8000 sms Example http 172 16 6 55 8000 sms Use of JavaScript Active Scripting must be enabled in the browser Enter Password The default SMS password is MeapSmsLogin Click Log In Install SafeCom Go login application 4 J 6 10 In the browser click Enhanced System Application Management in the left menu Scroll down to the section Install Enhanced System Application License In Enhanced System Application File Path click Browse to locate and select the safecom_go canon 01002009 login jar file Click Open If file is not present you need to get the file first 2 8 1 In License File Path click Browse to locate and select the safecom_go canon 01002009 login 1Jic file Click Open Click Install When the Confirm page appears click Yes to proceed with the installation In the Login Service section select SafeCom Go Login and click SWITCH If Canon Access Management System Kit A2 AMS is installed a confirmation message may appear listing applications that do not support function restriction Click OK to this message Install SafeCom Go application 11 12 13 14 15 16 Click Install MEAP Application in the left menu In Application File Path click Browse to loca
30. lso known as HP M24 you need to use SafeCom G4 and you MUST have an ID Device license associated with the device In SafeCom Administrator open the Device properties dialog go to the License tab and ensure that ID device is checked The HP M24 reader can support two different technologies The HP M24 reader must be programmed prior to connection to the Canon device Below is a list of the HEX codes and what card type they correspond to 27 2 SafeCom Go Canon HEX code Card type 6F01 iClass CSN 1S01443A CSN IS015693A CSN RDR 758x Compatible 7D01 HID iClass CSN 7E01 ISO 15693A CSN l Code CSN my d CSN Etag CSN Secura Key Tag It CSN Texas Instruments 7F01 ISO 14443A CSN Advant CSN Legic DESFire CSN I tag CSN MiFare CSN Philips NXP MiFare Ultralight CSN Philips NXP EA01 Farpointe Data NXT UID Keri NXT UID Pyramid UID EA02 Farpointe Data 26 Bit Keri NXT 26 Bit Pyramid 26 Bit EB02 Radio Key Secura Key 02 RDR 6Z8X Compatible ECO1 Securakey 01 EDO2 Indala ASP UID Motorola No decryption raw data returned EF04 HID Prox F004 ReadyKey PRO UID F201 HiTag 2 Primary RDR 6HXX Compatible F204 HiTag 2 Alternate F302 HiTag 1 and S Primary RDR 6H8X Compatible F304 HiTag 1 and S Alternate F401 Deister UID F503 GProx II UID F602 Cardax UID Russwin UID F702 2Smart Key Honeywell KeyMate Nexwatch Honeywell Nexkey QuadraKey F80
31. m Support If the device is unable to upload to the server the device will keep the log and try to upload again after yet another hour Note The device will always log performance data network latency authentication duration of successful logins number of Out of order occurrences and duration failover and failback between G4 servers device reboots changes in firmware and Go versions D60707 18 22 2 SafeCom Go Canon 2 7 6 Language web page The Language web page allows selection of language E amp icom_ Language Language Setting L Select language English The new language takes effect the next time someone logs in at the MFP 1 Select a Language 2 Click Apply All language texts are stored in the XML file captions xml Additional languages can be added to this file if required 2 7 7 Password web page The Password web page allows change of password Eeicom_ Password Information aah pina Change Password Register Old password Log New password Language L Confirm new password Password Logout D60707 18 23 2 SafeCom Go Canon 2 8 2 8 1 2 8 2 D60707 18 SafeCom Go Canon How to The following subsections contain step by step instructions for some of the administrator s common tasks Get the SafeCom Go Canon software The SafeCom Go Canon software files were installed from the SafeCom CD or can be downloaded using the SafeCom Administrator
32. mentation SafeCom Smart Printing SafeCom Smart Printing Administrator s Quick Guide D10600 How to install a SafeCom Smart Printing solution SafeCom G4 SafeCom G4 Administrator s Manual D60650 A comprehensive Manual that the administrator should consult to make a successful SafeCom solution Includes information about SafeCom Tracking SafeCom Rule Based Printing SafeCom Client Billing and SafeCom Pay SafeCom Go Canon SafeCom Go Canon Administrator s Manual D60707 this manual Manual on how to install configure and use SafeCom Go Canon SafeCom Go Canon User s Guide D20707 User s Guide on how to use SafeCom Go Canon About this manual This manual applies to SafeCom G4 Server version S82 070 510 01 and SafeCom Go Canon version 88 010 020 12 This manual is organized as follows Chapter 1 Introduction lists the supplied SafeCom documentation introduces SafeCom relevant terms system requirements and describes how this manual is organized Chapter 2 SafeCom Go Canon describes the installation and the web interface of the internal solution for Canon MFPs Chapter 3 Using SafeCom Go Canon describes how to interact with the Canon MFP s control panel when SafeCom Go Canon is installed e Chapter 4 Troubleshooting contains hints for troubleshooting Chapter 5 Regulatory information contains regulatory information 1 Introduction 1 7 Document history Revision D60707 18 SafeCom
33. n changes within 10 seconds after a USB ID device is either connected or disconnected to the device Auto sense is supported in SafeCom Go Canon S88 010 020 01 and newer ID code Login by ID code only Card Login by card only Card or ID code Login by card or ID code Card or Windows Login by card or by entering Windows username password and domain O OyO rO e Pre fill domain o Blank default Use if users belong to different domains This means that all users need to enter their domain when they login with their Windows username and password o Default domain Use if a majority of users belong to a particular domain as the specified Default domain is pre filled making it easier for the users to login with their Windows username password and domain o Hide Use if all users belong to the same domain as it saves users from being prompted for the domain when they login with their Windows username and password Be sure to have specified the Default domain otherwise the choice reverts back to Blank when you click Apply Note The SafeCom G4 server must be a member of the domain or trusted by the domain e Mask ID code Check to increase security by using the asterisk character to mask the entered ID code Show newest first Check to have documents listed and printed in last in first out order D60707 18 19 2 SafeCom Go Canon D60707 18 Login without PIN code Check if users do NOT need to enter a 4 digit
34. nistrator rights has been identified at the MFP Once the device is registered it appears in the SafeCom Administrator Set password to prevent unauthorized access 1 Open the Password web page 2 7 7 Enter the Old password New password and Confirm new password The password is maximum 8 characters 3 Click Apply Warning Make sure to store the password ina secure place If you forget the password you need to uninstall SafeCom Go Canon Select login method 1 Open the Configuration web page 2 7 3 2 Change Login method to any of the following Card Card or ID code Card or Windows 3 Click Apply Login with Windows without specifying the domain If all users belong to the same domain you can avoid prompting users to enter the domain at the printer 1 Open the Configuration web page 2 7 3 2 Specify a Default domain 3 Change Pre fill domain to Hide 4 Click Apply Login without PIN code Use of PIN code is possible on devices with keypad or touch screen This setting applies to the device and overrules the equivalent user property Requesting the user to enter a personal 4 digit PIN code when they identify themselves at the printer can enhance document security 1 Open the Configuration web page 2 7 3 2 Clear Login without PIN code if you want to prompt users for PIN code 3 Click Apply 25 2 SafeCom Go Canon 2 8 8 2 8 9 D60707 18 Define System Manager 1 3O pO ALOS TA a ad
35. ote When SafeCom is responsible for authentication SafeCom Go Login is started then the Additional Functions button only works once logged into the SafeCom solution Press to access Additional Functions Tap System Settings In System Settings tap Dept ID Management Tap Off and tap OK In System Settings tap System Manager Settings Make sure System Manager ID is blank and tap OK Tap Done N O ee On older Canon devices you may want to select MEAP Pull Print as the Initial Function If so please perform these steps also Otherwise proceed with the installation of the SafeCom Go Canon software 2 4 2 8 Press to access Additional Functions 9 Tap Common Settings 10 In Common Settings tap Function Display Settings 11 In Initial Function and Function Order Settings tap Settings 12 Tap MEAP and tap Set as Initial Function 13 Tap Next Tap OK 14 In Common Setting tap Auto Clear Setting 15 Tap Initial Function Tap OK 16 Tap Done 17 Tap Done Note Step 8 17 may vary between models For detailed instructions please consult the supplied Canon documentation Proceed with the installation of the SafeCom Go Canon software 2 4 2 SafeCom Go Canon software installation The software MUST be installed via the Canon MFP s web interface It is NOT possible to send the software via the SafeCom Administrator Please refer to the appropriate section e Canon imageRunner ADVANCE series 2 4 1 e O
36. r the IP address of the MFP in the address field followed by 8000 sms Example http 172 16 6 55 8000 sms Use of JavaScript Active Scripting must be enabled in the browser Enter Password The default SMS password is MeapSmsLogin Click Log In Install SafeCom Go login application 4 5 6 7 8 9 1 0 In the browser click System Management Click on the Enhanced Sys App tab and Scroll to the bottom of the page In Enhanced Sys App click Browse to locate and select the safecom_go canon 01002009 login jar file Click Open If file is not present you need to get the file first 2 8 1 In License File to Install click Browse to locate and select the safecom_ go canon 01002009 login 1Jic file Click Open Click Install When the Confirm page appears click OK to proceed with the installation After the install select SafeCom Go Login and click Select Install SafeCom Go application 11 12 13 Click on the Install tab In Application File click Browse to locate and select the safecom go canon 01002009 jar file Click Open In License File click Browse to locate and select the safecom go canon_01002009 1ic file Click Open Click OK When the Confirm page appears click OK to proceed with the installation After the install select SafeCom Go and click Start Wait until the Status for SafeCom Go says Started Restart the MFP 14 2 SafeCom Go Canon 18 On the cont
37. rol panel press and hold the power button to restart the MFP The Restart device command in SafeCom Administrator does NOT work with Canon MFPs 2 5 Specify SafeCom Server and register device 1 Open a web browser and enter the address of the MFP in the address field followed by 8000 safecom Example http 172 16 6 55 8000 safecom Use of JavaScript Active Scripting must be enabled in the browser If a System Manager is defined 2 8 8 then enter System Manager ID and System PIN and click Administrator Login to access all the Canon web pages Clicking General User Login instead will give limited access where it is not possible to control management settings and restart the Canon device remotely Log In System Manager ID System PIN A general user can log in without entering the System Manager ID and System PIN Administrator Login General User Login 2 Click Configuration on the menu to access the SafeCom Configuration web page 2 7 3 Type admin for the user name type your password default is nimda and then click OK 3 Enter Group name Server address and TCP port default is 7500 If the SafeCom server is clustered you must enter the address of the virtual server SafeCom Server Group name TCP port 7500 L Server address 172 16 7 81 Move up Move down L Add server f Add 4 Click Apply 5 Click Register on the menu to access the SafeCom Register web page 2
38. te and select the safecom go canon 01002009 jar file Click Open In License File Path click Browse to locate and select the safecom go canon_01002009 1ic file Click Open Click Install When the Confirm page appears click Yes to proceed with the installation When the SafeCom Go is installed page appears click To MEAP Application Management Select SafeCom Go and click Start Wait until the Status for SafeCom Go says Started Check the device s scan log settings on the Canon imageRunner Advance webpage Go to the Settings Registration page click Management Settings and then Device Management Find the Display Log and make sure that Display Job Log is selected Prevent additional user credentials popup when sending e mails 20 Go to the device webpage front page and click Settings Registration 13 2 SafeCom Go Canon 2 4 2 D60707 18 21 22 23 In the Function Settings menu to the left click Send In the Common Settings menu to the right click Communications Settings E Mail I Fax Settings In the Communications Settings E Mail I Fax Settings window clear the Use SMTP Authentication for Each User checkbox and click OK in the top right corner Restart the MFP 24 On the control panel press and hold the power button to restart the MFP The Restart device command in SafeCom Administrator does NOT work with Canon MFPs Older Canon devices 1 2 3 Open a web browser and ente
39. ustom Settings Click Timer Settings Change the Auto Clear Time and click OK 26 2 SafeCom Go Canon 2 8 10 2 8 11 2 8 12 2 8 13 2 8 14 D60707 18 Restore factory default 1 Open the Configuration web page 2 7 3 2 Click Restore Determine the version The version of the SafeCom Go Canon software can be determined from the Information web page 1 Open the Information web page 2 7 2 The version can also be seen in the Device properties dialog in SafeCom Administrator Select SafeCom Go login as login service 1 Open a web browser and enter the IP address of the MFP in the address field followed by 8000 sms Example http 172 16 6 55 8000 sms Use of JavaScript Active Scripting must be enabled in the browser Enter Password The default SMS password is MeapSmsLogin Click Log In In the browser click on the System Management tab Click on the Enhanced Sys App tab In the Login Service section select SafeCom Go Login On the control panel press and hold the power button to restart the MFP ee eee Update the version If you are updating from a previous version to 88 010 010 03 you need to uninstall the previous SafeCom Go Canon version first This is because the product now has a new ID 1 Uninstall SafeCom Go Canon 2 9 2 Install the new SafeCom Go Canon 2 4 HP Access Control USB proximity card reader HP M24 To use the HP Access Control USB proximity card reader a
40. ware 2 4 Restart the MFP 4 Specify SafeCom server and register device 2 5 Install optional card reader This section is only relevant if users will login by card Connect the SafeCom ID Device directly to the external USB port The USB port is located at the rear next to the network port Some MFPs feature a USB port near the touch screen control panel This is reserved for connection of storage media such as USB memory key Do NOT connect the SafeCom ID device to this USB port Prepare MFP for installation For detailed instructions please consult the supplied Canon documentation Ensure that the MFP has Department ID management disabled Please refer to the appropriate section e Canon imageRunner ADVANCE series 2 3 1 e Older Canon devices 2 3 2 Canon imageRunner ADVANCE series Note When SafeCom is responsible for authentication SafeCom Go Login is started then the Settings Registration button only works once logged into the SafeCom solution Access to Management Settings is only allowed if you are logged in as Administrator or Technician Press to access Settings Registration Tap Management Settings Tap User Management Tap Department ID Management and then Settings Make sure that Enable Department ID Management is cleared Tap OK OuKRhWN Proceed with the installation of the SafeCom Go Canon software 2 4 1 11 2 SafeCom Go Canon 2 3 2 2 4 D60707 18 Older Canon devices N

Nuance comm Webcam D60707-18 User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents