Nortel Networks 8672ATMM User's Manual
Contents
1. This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the Federal Communications Commission FCC rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy If it is not installed and used in accordance with the instruction manual it may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case users will be required to take whatever measures may be necessary to correct the interference at their own expense Nortel Ethernet Routing Switch 8600 Installation Media Dependent Adapters for the 8672ATME and 8672ATMM Modules NN46205 316 01 01 Standard 30 May 2008 Copyright 2008 Nortel Networks 6 Regulatory Information and Safety Precautions ICES Statement Canada only Canadian Department of Communications Radio Interference Regulations This digital apparatus 8000 Series chassis and installed components does not exceed the Class A limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications R glement sur le brouillage radio lectrique du minist re des Communications Cet appareil num rique 8000 Series chassis respect2. Entladung von statischer Elektrizit t und Folgesch den an Nortel Produkten verhindert CAUTION PRECAUCION ESD Descarga electrost tica El aviso de ESD brinda informaci n acerca de c mo evitar una descarga de electricidad est tica y el dafio posterior a los productos Nortel CAUTION CUIDADO ESD Os avisos do ESD oferecem informa es sobre como evitar descarga de eletricidade est tica e os consequentes danos aos produtos da Nortel Nortel Ethernet Routing Switch 8600 Installation Media Dependent Adapters for the 8672ATME and 8672ATMM Modules NN46205 316 01 01 Standard 30 May 2008 Copyright O 2008 Nortel Networks 12 Regulatory Information and Safety Precautions CAUTION ATTENZIONE ESD Le indicazioni ESD forniscono informazioni per evitare scariche di elettricit statica e i danni correlati per i prodotti Nortel Caution Notice CAUTION Caution notices provide information about how to avoid possible service disruption or damage to Nortel products CAUTION ATTENTION La mention Attention fournit des informations sur les moyens de pr venir une perturbation possible du service et d viter d endommager les produits Nortel CAUTION ACHTUNG Achtungshinweise bieten Informationen dazu wie man m gliche Dienstunterbrechungen oder Sch den an Nortel Produkten verhindert CAUTION PRECAUCION Los avisos de Precauci n brindan informaci n acerca de c mo evitar posibles interrupciones del servic
3. Modules NN46205 316 for release 5 0 Features page 21 e Other changes page 21 Features This document contains no feature updates in release 5 0 Other changes See the following section for information about changes that are not feature related Document changes This document is modified to meet Nortel Customer Documentation Standards For more information about these standards see Nortel Ethernet Routing Switch 8600 Documentation Roadmap NN46205 103 Nortel Ethernet Routing Switch 8600 Installation Media Dependent Adapters for the 8672ATME and 8672ATMM Modules NN46205 316 01 01 Standard 30 May 2008 Copyright 2008 Nortel Networks 22 New in this re __ No Installation Media Depen and 8672ATMM Modules Copyright O 2008 Nortel Networks 23 Introduction This guide describes how to install the Media Dependent Adapters MDAs for the 8672ATME and 8672ATMM Modules on Ethernet Routing Switch 8600 Navigation e MDA overview page 25 Media Dependent Adapter installation for the 8672ATME and 8672ATMM modules page 27 e MDA and LED specifications page 41 Nortel Ethernet Routing Switch 8600 Installation Media Dependent Adapters for the 8672ATME and 8672ATMM Modules NN46205 316 01 01 Standard 30 May 2008 Copyright 2008 Nortel Networks 24 Introdu __ No Installation Media Depen and 8672ATMM Modules Copyright O 2008 No
4. connectors Procedure steps Step Action 1 Push the coaxial cable onto the DS 3 connector Nortel Ethernet Routing Switch 8600 Installation Media Dependent Adapters for the 8672ATME and 8672ATMM Modules NN46205 316 01 01 Standard 30 May 2008 Copyright 2008 Nortel Networks Connecting coaxial cables 35 10551FB 2 Turn the coaxial cable to the right until the key on the DS 3 connector clicks into the notch on the coaxial cable End Nortel Ethernet Routing Switch 8600 Installation Media Dependent Adapters for the 8672ATME and 8672ATMM Modules NN46205 316 01 01 Standard 30 May 2008 Copyright 2008 Nortel Networks tion for the 8672ATME and 86 ATMM modules 36 Media Dependent Adapter installa N Installation Media Depend and 8672ATMM Modules Copyright O 2008 Nortel Networks Translation of Safety messages Class A product caution statement CAUTION This device is a Class A product Operation of this equipment in a residential area is likely to cause harmful interference in which case users are required to take appropriate measures necessary to correct the interference at their own expense CAUTION ATTENTION Le p riph rique est un produit de Classe A Le fonctionnement de cet quipement dans une zone r sidentielle risque de causer des interf rences nuisibles auquel cas l utilisateur devra y rem dier ses propres frais CAUTION ACHTUNG Dies ist
5. poder Model 8004DC 48 VCD 29A Model 8005DC 48 VCD 42 A Denan Statement Japan Nippon only S ARLE EB ERA Dron ERT e RT MEDE ACTYT ARE BA UF MICA ent CH Nortel Ethernet Routing Switch 8600 Installation Media Dependent Adapters for the 8672ATME and 8672ATMM Modules NN46205 316 01 01 Standard Copyright O 2008 Nortel Networks 30 May 2008 Safety Messages 11 Safety Messages This section describes the different precautionary notices used in this document This section also contains precautionary notices that you must read for safe operation of the Nortel Ethernet Routing Switch 8600 Notices Notice paragraphs alert you about issues that require your attention The following sections describe the types of notices For a list of safety messages used in this guide and their translations see Translations of safety messages Attention Notice ATTENTION An attention notice provides important information regarding the installation and operation of Nortel products Caution ESD Notice CAUTION ESD ESD notices provide information about how to avoid discharge of static electricity and subsequent damage to Nortel products CAUTION ESD d charge lectrostatique La mention ESD fournit des informations sur les moyens de pr venir une d charge lectrostatique et d viter d endommager les produits Nortel CAUTION ACHTUNG ESD ESD Hinweise bieten Information dazu wie man die
6. product conforms to the provisions of the R amp TTE Directive 1999 5 EC Nortel Ethernet Routing Switch 8600 Installation Media Dependent Adapters for the 8672ATME and 8672ATMM Modules NN46205 316 01 01 Standard 30 May 2008 Copyright 2008 Nortel Networks National Electromagnetic Compliance EMC Statements of Compliance 7 European Union and European Free Trade Association EFTA Notice All products labeled with the CE marking comply with R amp TTE Directive E E 1999 5 EEC which includes the Electromagnetic Compliance EMC Directive 2004 108 EC and the Low Voltage Directive 2006 95 EC issued by the Commission of the European Community Compliance with these directives implies conformity to the following European Norms ENs The equivalent international standards are listed in parenthesis EN 55022 CISPR 22 Electromagnetic Interference EN 55024 IEC 61000 4 2 3 4 5 6 8 11 Electromagnetic Immunity e EN 61000 3 2 IEC 610000 3 2 Power Line Harmonics EN 61000 3 3 IEC 610000 3 3 Power Line Flicker VCCI Statement Japan Nippon only This is a Class A product based on the standard of the Voluntary Control Council for Interference VCCI for information technology equipment If this equipment is used in a domestic environment radio disturbance may arise When such trouble occurs the user may be required to take corrective actions CORES HHLRKESCRRSAEMHNBRS VCCI DEH ESC VIAZAMMRHERCT TOHE SXI
7. 2008 Copyright O 2008 Nortel Networks __ No Installation Media Depen and 8672ATMM Modules Copyright O 2008 Nortel Networks 17 Software license This section contains the Nortel Networks software license Nortel Networks Inc software license agreement This Software License Agreement License Agreement is between you the end user Customer and Nortel Networks Corporation and its subsidiaries and affiliates Nortel Networks PLEASE READ THE FOLLOWING CAREFULLY YOU MUST ACCEPT THESE LICENSE TERMS IN ORDER TO DOWNLOAD AND OR USE THE SOFTWARE USE OF THE SOFTWARE CONSTITUTES YOUR ACCEPTANCE OF THIS LICENSE AGREEMENT If you do not accept these terms and conditions return the Software unused and in the original shipping container within 30 days of purchase to obtain a credit for the full purchase price Software is owned or licensed by Nortel Networks its parent or one of its subsidiaries or affiliates and is copyrighted and licensed not sold Software consists of machine readable instructions its components data audio visual content such as images text recordings or pictures and related licensed materials including all whole or partial copies Nortel Networks grants you a license to use the Software only in the country where you acquired the Software You obtain no rights other than those granted to you under this License Agreement You are responsible for the selection of the Software and for
8. 4 OC 3c STM 1 MDA specifications 8672ATME and 8672ATMM modules SMF description MMF description Physical media 9 125 um 62 5 125 um Wavelength 1274 to 1356 nm 1274 to 1356 nm Average transmit output power 8 to 15 dBm 14 to 20 dBm Average receiver sensitivity 8 to 28 dBm 14 to 30 dBm Nortel Ethernet Routing Switch 8600 Installation Media Dependent Adapters for the 8672ATME and 8672ATMM Modules NN46205 316 01 01 Standard 30 May 2008 Copyright 2008 Nortel Networks 42 MDA and LED specifications Table 4 OC 3c STM 1 MDA specifications 8672ATME and 8672ATMM modules cont d SMF description MMF description Thermal rating 138 BTU hour maximum 138 BTU hour maximum The OC 12c STM 4 MDA uses SONET STS 3c SDH STM 1 1300 nm optical transceivers with duplex SC type fiber optic connectors and either single mode fiber SMF or multimode fiber MMF cabling The following table describes the OC 12c STM 4 MDA specifications Table 5 OC 12c STM 4 MDA specifications 8672ATME and 8672ATMM modules Average transmit output power The DS 3 MDA uses a 75 ohm coaxial cable The following table describes the DS 3 MDA specifications Table 6 DS 3 MDA specifications 8672ATME and 8672ATMM modules Maximum length 450 feet 135 m LEDs The MDAs have two bicolor LEDs on each port one marked as TX transmit and the other as RX receive The following table describes the MDA LED indications Nortel Ethernet Routing S
9. 6205 316 01 01 Standard 30 May 2008 Copyright 2008 Nortel Networks 44 MDA and LED sp __ No Installation Media Depen and 8672ATMM Modules Copyright O 2008 Nortel Networks Nortel Ethernet Routing Switch 8600 Installation Media Dependent Adapters for the 8672ATME and 8672ATMM Modules Copyright O 2008 Nortel Networks All Rights Reserved Printed in Canada India and the United States of America Release 5 0 Publication NN46205 316 Document status Standard Document revision 01 01 Document release date 30 May 2008 To provide feedback or to report a problem in this document go to www nortel com documentfeedback www nortel com LEGAL NOTICE While the information in this document is believed to be accurate and reliable except as otherwise expressly agreed to in writing NORTEL PROVIDES THIS DOCUMENT AS IS WITHOUT WARRANTY OR CONDITION OF ANY KIND EITHER EXPRESS OR IMPLIED The information and or products described in this document are subject to change without notice Nortel the Nortel logo the Globemark and Passport are trademarks of Nortel Networks All other trademarks are the property of their respective owners ATTENTION For information about the regulatory and safety precautions read Regulatory messages and safety precautions in this guide For information about the software license read Software license in this guide For a list of safety messages used in this guide an
10. DIRECT INDIRECT SPECIAL INCIDENTAL PUNITIVE OR CONSEQUENTIAL DAMAGES INCLUDING LOST PROFITS OR SAVINGS WHETHER IN CONTRACT TORT OR OTHERWISE INCLUDING NEGLIGENCE ARISING OUT OF YOUR USE OF THE SOFTWARE EVEN IF NORTEL NETWORKS ITS AGENTS OR SUPPLIERS HAVE BEEN ADVISED OF THEIR POSSIBILITY The forgoing limitations of remedies also apply to any developer and or supplier of the Software Such developer and or supplier is an intended beneficiary of this Section Some jurisdictions do not allow these limitations or exclusions and in such event they may not apply 4 General 1 If Customer is the United States Government the following paragraph shall apply All Nortel Networks Software available under this License Agreement is commercial computer software and commercial computer Nortel Ethernet Routing Switch 8600 Installation Media Dependent Adapters for the 8672ATME and 8672ATMM Modules NN46205 316 01 01 Standard 30 May 2008 Copyright 2008 Nortel Networks Nortel Networks Inc software license agreement 19 software documentation and in the event Software is licensed for or on behalf of the United States Government the respective rights to the software and software documentation are governed by Nortel Networks standard commercial license in accordance with U S Federal Regulations at 48 C F R Sections 12 212 for non DoD entities and 48 C F R 227 7202 for DoD entities 2 Customer may terminate the license at a
11. ERRCIERT S cq DREESIAETICENDNES oSRelcut mmti sss m 5k5NR nscthkbuti BSMI Statement for 8010 8006 and 8003 Chassis Taiwan only This is a Class A product based on the standard of the Bureau of Standards Metrology and Inspection BSMI CNS 13438 Class A ub EE PANAMA gt TERR CERTOS HRS HIS TRE SORS DU ZR FR HERIND AEREOS ESE MIC Notice for 8010 8006 8003 Chassis Republic of Korea only This device has been approved for use in Business applications only per the Class A requirements of the Republic of Korea Ministry of Information and Communications MIC This device may not be sold for use in a non business application Nortel Ethernet Routing Switch 8600 Installation Media Dependent Adapters for the 8672ATME and 8672ATMM Modules NN46205 316 01 01 Standard 30 May 2008 Copyright O 2008 Nortel Networks 8 Regulatory Information and Safety Precautions Ven OTT OTT One Ore Zen Zen en ro See Go dee Ore Ore Ze Ore der A 2 Sa 9 Switch Passport 2600 ECtt 02 0015 A seet Nostal Networks Ltd BT Za 2 Nortel Networks Ltd Bl Acum e ge vago SAP 807 N97 SAP 8809 N97 SNP SH ge SHIP SNP ge E ge e National Safety Statements of Compliance CE Marking Statement Europe only EN 60 950 Statement This is to certify that the Nortel 8000 Series chassis and components installed within the chassis are in compliance with the requirements of EN 60 950 in accordance with the Low Voltage Directive Addition
12. Introduction 23 MDA overview 25 Media Dependent Adapter installation for the 8672ATME and 8672ATMM modules 27 Estimated installation time 27 Estimated time for installation 27 Translation of Safety messages 37 Class A product caution statement 37 38 MDA and LED specifications 41 Copyright 2008 Nortel Networks Nortel Ethernet Routing Switch 8600 Installation Media Dependent Adapters for the 8672ATME and 8672ATMM Modules NN46205 316 01 01 30 May 2008 Standard __ No Installation Media Depen and 8672ATMM Modules Copyright O 2008 Nortel Networks Regulatory Information and Safety Precautions Read the information in this section to learn about regulatory conformities and compliances International Regulatory Statements of Conformity This is to certify that the Nortel 8000 Series chassis and components installed within the chassis were evaluated to the international regulatory standards for electromagnetic compliance EMC and safety and were found to have met the requirements for the following international standards e EMC Electromagnetic Emissions CISPR 22 Class A e EMC Electromagnetic Immunity CISPR 24 e Electrical Safety JEC 60950 with CB member national deviations Further the equipment has been certified as compliant with the national standards as detailed in the following sections National Electromagnetic Compliance EMC Statements of Compliance FCC Statement USA only
13. NORTEL Installation Media Dependent Adapters for the 86 2ATME and 8672ATMM Modules Release 5 0 Document Revision 01 01 www nortel com NN46205 316 313071 D Rev 01 Nortel Ethernet Routing Switch 8600 Release 5 0 Publication NN46205 316 Document status Standard Document release date 30 May 2008 Copyright O 2008 Nortel Networks All Rights Reserved Printed in Canada India and the United States of America LEGAL NOTICE While the information in this document is believed to be accurate and reliable except as otherwise expressly agreed to in writing NORTEL PROVIDES THIS DOCUMENT AS IS WITHOUT WARRANTY OR CONDITION OF ANY KIND EITHER EXPRESS OR IMPLIED The information and or products described in this document are subject to change without notice Nortel the Nortel logo the Globemark and Passport are trademarks of Nortel Networks All other trademarks are the property of their respective owners ATTENTION For information about the regulatory and safety precautions read Regulatory messages and safety precautions in this guide For information about the software license read Software license in this guide For a list of safety messages used in this guide and their translations see Translations of safety messages Contents Regulatory Information and Safety Precautions 5 Software license 17 New in this release 21 Features 21 Other changes 21 Document changes 21
14. al national differences for all European Union countries have been evaluated for compliance Some components installed within the 8000 Series chassis may use a nickel metal hydride NiMH and or lithium ion battery The NiMH and lithium ion batteries are long life batteries and it is very possible that you will never need to replace them However should you need to replace them refer to the individual component manual for directions on replacement and disposal of the battery NOM Statement 8010 8006 and 8003 Chassis Mexico only The following information is provided on the devices described in this document in compliance with the safety requirements of the Norma Oficial M xicana NOM Exporter Nortel Networks Inc 4655 Great America Parkway Santa Clara CA 95054 USA Importer Nortel Networks de M xico S A de C V Avenida Insurgentes Sur 1605 Piso 30 Oficina Col San Jose Insurgentes Deleg Benito Juarez Nortel Ethernet Routing Switch 8600 Installation Media Dependent Adapters for the 8672ATME and 8672ATMM Modules NN46205 316 01 01 Standard 30 May 2008 Copyright 2008 Nortel Networks National Safety Statements of Compliance 9 M xico D F 03900 Tel 52 5 480 2100 Fax 52 5 480 2199 Input Model 8003AC 100 240 VAC 50 60 Hz 9 A maximum for each power supply Model 8004AC 100 240 VAC 50 60 Hz 12 6 A maximum for each power supply Model 8005AC 100 120 VAC 50 60 Hz 16 A maximum for each powe
15. bbero causare gravi danni alle persone o il decesso a causa dell alta tensione o di scosse elettriche DANGER Danger notices provide information about how to avoid a situation or condition that can cause serious personal injury or death DANGER La mention Danger fournit des informations sur les moyens de pr venir une situation ou une condition qui pourrait entra ner un risque de blessure grave ou mortelle DANGER GEFAHR Gefahrenhinweise stellen Informationen dar ber bereit wie man Situationen oder Umst nden verhindert die zu schweren Personensch den oder Tod f hren k nnen DANGER PELIGRO Los avisos de Peligro brindan informaci n acerca de c mo evitar una situaci n o condici n que pueda causar lesiones personales graves o la muerte DANGER PERIGO Avisos de perigo oferecem informa es sobre como evitar uma situa o ou condi o que possa causar graves ferimentos ou morte Nortel Ethernet Routing Switch 8600 Installation Media Dependent Adapters for the 8672ATME and 8672ATMM Modules NN46205 316 01 01 Standard 30 May 2008 Copyright O 2008 Nortel Networks Safety Messages 15 DANGER PERICOLO Le indicazioni di pericolo forniscono informazioni per evitare situazioni o condizioni che potrebbero causare gravi danni alle persone o il decesso Nortel Ethernet Routing Switch 8600 Installation Media Dependent Adapters for the 8672ATME and 8672ATMM Modules NN46205 316 01 01 Standard 30 May
16. d their translations see Translations of safety messages NORTEL
17. e les limites de bruits radio lectriques visant les appareils num riques de classe A prescrites dans le R glement sur le brouillage radio lectrique du minist re des Communications du Canada CE Marking Statement Europe only EN 55 022 Statements This is to certify that the Nortel 8000 Series chassis and components installed within the chassis are shielded against the generation of radio interference in accordance with the application of Council Directive 2004 108 EC Conformity is declared by the application of EN 55 022 Class A CISPR 22 CAUTION This device is a Class A product Operation of this equipment in a residential area is likely to cause harmful interference in which case users are required to take appropriate measures necessary to correct the interference at their own expense EN 55 024 Statement This is to certify that the Nortel 8000 Series chassis is shielded against the susceptibility to radio interference in accordance with the application of Council Directive 2004 108 EC Conformity is declared by the application of EN 55 024 CISPR 24 EN 300386 Statement The Ethernet Routing Switch 8000 Series chassis complies with the requirements of EN 300386 V1 3 3 for emissions and for immunity for a Class A device intended for use in either Telecommunications centre or locations other than telecommunications centres given the performance criteria as specified by the manufacturer EC Declaration of Conformity This
18. ein Ger t der Klasse A Bei Einsatz des Ger ts in Wohngebieten kann es St rungen des Radio und Fernsehempfangs verursachen In diesem Fall muss der Benutzer alle notwendigen MaBnahmen ergreifen die m glicherweise n tig sind um die St rungen auf eigene Rechnung zu beheben CAUTION PRECAUCION Este es un producto clase A El uso de este equipo en reas residenciales puede causar interferencias nocivas en cuyo caso se requerir que los usuarios tomen cualquier medida necesaria para corregir la interferencia por cuenta propia Nortel Ethernet Routing Switch 8600 Installation Media Dependent Adapters for the 8672ATME and 8672ATMM Modules NN46205 316 01 01 Standard 30 May 2008 Copyright 2008 Nortel Networks 38 Translation of Safety messages CAUTION CUIDADO Este dispositivo um produto Classe A Operar este equipamento em uma rea residencial provavelmente causar interfer ncia prejudicial neste caso espera se que os usu rios tomem as medidas necess rias para corrigir a interfer ncia por sua pr pria conta CAUTION ATTENZIONE Questo dispositivo un prodotto di Classe A Il funzionamento di questo apparecchio in aree residenziali potrebbe causare interferenze dannose nel cui caso agli utenti verr richiesto di adottare tutte le misure necessarie per porre rimedio alle interferenze a proprie spese CAUTION CAUTION ESD To prevent damage from electrostatic discharge always wear an antistat
19. ependent Adapters for the 8672ATME and 8672ATMM Modules NN46205 316 01 01 Standard 30 May 2008 Copyright 2008 Nortel Networks 28 Media Dependent Adapter installation for the 8672ATME and 8672ATMM modules Table 2 Task and estimated time cont d Task Estimated time Aligning the MDA with the front portion of the module and 2 5 minutes mounting the posts Seating MDA and tightening the screws and the label Removing dust plugs and caps Total time required 10 22 minutes Installing an MDA This procedure describes how to install an MDA on Ethernet Routing Switch 8600 CAUTION Risk of service loss You cannot hot swap an MDA You must remove the 8672ATME or 8672ATMM module install the MDA and then reinstall the module For more information about removing and installing the 8672ATME and 8672ATMM modules see Ethernet Routing Switch 8600 Installation Modules NN46205 304 Procedure steps Step Action 1 Lay the 8672ATME or the 8672ATMM module on a flat static free surface 2 Lift the cover out of the MDA slot by unscrewing the two screws and lifting the cover straight up Set the cover aside for possible future use Nortel Ethernet Routing Switch 8600 Installation Media Dependent Adapters for the 8672ATME and 8672ATMM Modules NN46205 316 01 01 Standard 30 May 2008 Copyright O 2008 Nortel Networks Installing an MDA 29 3 Line up the MDA with the front of the 8672ATME or the 8672ATMM module posi
20. iaries of this provision Upon termination or breach of the license by Customer or in the event designated hardware or CFE is no longer in use Customer will promptly return the Software to Nortel Networks or certify its destruction Nortel Networks may audit by remote polling or other reasonable means to determine Customer s Software activation or usage levels If suppliers of third party software included in Software require Nortel Networks to include additional or different terms Customer agrees to abide by such terms provided by Nortel Networks with respect to such third party software 2 Warranty Except as may be otherwise expressly agreed to in writing between Nortel Networks and Customer Software is provided AS IS without any warranties conditions of any kind NORTEL NETWORKS DISCLAIMS ALL WARRANTIES CONDITIONS FOR THE SOFTWARE EITHER EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ANY WARRANTY OF NON INFRINGEMENT Nortel Networks is not obligated to provide support of any kind for the Software Some jurisdictions do not allow exclusion of implied warranties and in such event the above exclusions may not apply 3 Limitation of Remedies INNO EVENT SHALL NORTEL NETWORKS OR ITS AGENTS OR SUPPLIERS BE LIABLE FOR ANY OF THE FOLLOWING a DAMAGES BASED ON ANY THIRD PARTY CLAIM b LOSS OF OR DAMAGE TO CUSTOMER S RECORDS FILES OR DATA OR c
21. ic wrist strap connected to an electrostatic discharge ESD jack when performing maintenance on this product Ensure that the wrist strap makes contact with your skin CAUTION CAUTION ATTENTION ESD d charge lectrostatique Pour pr venir tout dommage d une d charge lectrostatique vous devez toujours porter un un bracelet antistatique connect une prise pour d charge lectrostatique ESD lors de l ex cution d op rations de maintenance sur ce produit Assurez vous que le bracelet antistatique est en contact avec votre peau CAUTION CAUTION PRECAUCION ESD Descarga electrost tica Para prevenir el da o producido por una descarga electrost tica use siempre una pulsera antiest tica conectada a un enchufe de descarga electrost tica ESD al realizar el mantenimiento de este producto Aseg rese de que la pulsera antiest tica haga contacto con su piel Nortel Ethernet Routing Switch 8600 Installation Media Dependent Adapters for the 8672ATME and 8672ATMM Modules NN46205 316 01 01 Standard 30 May 2008 Copyright 2008 Nortel Networks 39 CAUTION CAUTION CUIDADO ESD Para evitar danos com descarga eletrost tica sempre use uma pulseira antiest tica que esteja conectada a uma tomada de descarga eletrost tica ESD quando estiver realizando a manuten o deste produto Certifique se de que a pulseira esteja em contato com sua pele CAUTION ATTENZIONE ESD Per evitare danni derivanti da
22. ice loss You cannot hot swap an MDA You must remove the 8672ATME or 8672ATMM module install the MDA and then reinstall the module Procedure steps Step 1 3 Action Remove the 8672ATME or the 8672ATMM module from the chassis and lay it on a flat static free surface For information about removing a module from the chassis see Ethernet Routing Switch 8600 Installation Modules NN46205 304 Using a 1 Phillips screwdriver unscrew the four screws from the MDA you want to remove 9884FA Place the palm of your hand on top of the MDA and cup your fingers around the back of the MDA Lift the MDA enough to loosen it from the mounting posts When the MDA is loosened from the mounting posts hold the sheet metal by each side and lift the MDA straight up being careful not to catch the lip of the MDA on the module Store the MDA in a static free container for later use Nortel Ethernet Routing Switch 8600 Installation Media Dependent Adapters for the 8672ATME and 8672ATMM Modules Copyright 2008 Nortel Networks NN46205 316 01 01 Standard 30 May 2008 32 Media Dependent Adapter installation for the 8672ATME and 8672ATMM modules 5 If you do not plan to install a replacement MDA place the slot cover on the MDA slot and tighten the two screws End Connecting fiber cables This procedure describes how to connect fiber cables to the installed MDA The OC 12c STM 4 MDA uses duplex SC connec
23. io o el dafio a los productos Nortel CAUTION CUIDADO Os avisos de cuidado oferecem informa es sobre como evitar poss veis interrup es do servi o ou danos aos produtos da Nortel CAUTION ATTENZIONE Le indicazioni di attenzione forniscono informazioni per evitare possibili interruzioni del servizio o danni ai prodotti Nortel Warning Notice WARNING Warning notices provide information about how to avoid personal injury when working with Nortel products Nortel Ethernet Routing Switch 8600 Installation Media Dependent Adapters for the 8672ATME and 8672ATMM Modules NN46205 316 01 01 Standard 30 May 2008 Copyright O 2008 Nortel Networks Safety Messages 13 WARNING AVERTISSEMENT La mention Avertissement fournit des informations sur les moyens de pr venir les risques de blessure lors de la manipulation de produits Nortel WARNING WARNUNG Warnhinweise bieten Informationen dazu wie man Personensch den bei der Arbeit mit Nortel Produkten verhindert WARNING ADVERTENCIA Los avisos de Advertencia brindan informaci n acerca de c mo prevenir las lesiones a personas al trabajar con productos Nortel WARNING AVISO Os avisos oferecem informa es sobre como evitar ferimentos ao trabalhar com os produtos da Nortel WARNING AVVISO Le indicazioni di avviso forniscono informazioni per evitare danni alle persone durante Putilizzo dei prodotti Nortel DANGER Danger High Voltage notices pro
24. ny time Nortel Networks may terminate the license if Customer fails to comply with the terms and conditions of this license In either event upon termination Customer must either return the Software to Nortel Networks or certify its destruction 3 Customer is responsible for payment of any taxes including personal property taxes resulting from Customer s use of the Software Customer agrees to comply with all applicable laws including all applicable export and import laws and regulations 4 Neither party may bring an action regardless of form more than two years after the cause of the action arose 5 The terms and conditions of this License Agreement form the complete and exclusive agreement between Customer and Nortel Networks 6 This License Agreement is governed by the laws of the country in which Customer acquires the Software If the Software is acquired in the United States then this License Agreement is governed by the laws of the state of New York Nortel Ethernet Routing Switch 8600 Installation Media Dependent Adapters for the 8672ATME and 8672ATMM Modules NN46205 316 01 01 Standard 30 May 2008 Copyright 2008 Nortel Networks __ No Installation Media Depen and 8672ATMM Modules Copyright O 2008 Nortel Networks 21 New in this release The following sections detail what s new in Nortel Ethernet Routing Switch 8600 Installation Media Dependent Adapters for the 8672ATME and 8672ATMM
25. r supply 200 240 VAC 50 60 Hz 8 5 A maximum for each power supply Model 8005DI AC 100 120 VAC 50 60 Hz 16 A maximum for each power supply 200 240 VAC 50 60 Hz 9 3 A maximum for each power supply Model 8004DC 48 60 VDC 29 23 A Model 8005DC 48 60 VDC 42 34 A Informaci n NOM unicamente para M xico La informaci n siguiente se proporciona en el dispositivo o en los dispositivos descritos en este documento en cumplimiento con los requisitos de la Norma Oficial M xicana NOM Exportador Nortel Networks Inc 4655 Great America Parkway Santa Clara CA 95054 USA Importador Nortel Networks de M xico S A de C V Avenida Insurgentes Sur 1605 Piso 30 Oficina Nortel Ethernet Routing Switch 8600 Installation Media Dependent Adapters for the 8672ATME and 8672ATMM Modules NN46205 316 01 01 Standard 30 May 2008 Copyright O 2008 Nortel Networks 10 Regulatory Information and Safety Precautions Tel Fax Embarcar a Col San Jose Insurgentes Deleg Benito Juarez M xico D F 03900 52 5 480 2100 52 5 480 2199 Model 8003AC 100 240 VCA 50 60 Hz 9 A max por fuente de poder Model 8004AC 100 240 VCA 50 60 Hz 12 6 A max por fuente de poder Model 8005AC 100 120 VCA 50 60 Hz 16 A max por fuente de poder 200 240 VCA 50 60 Hz 9 5 A max por fuente de poder Model 8005DI AC 100 120 VCA 50 60 Hz 16 A max por fuente de poder 200 240 VCA 50 60 Hz 9 3 A max por fuente de
26. r the 8672ATME and 8672ATMM modules Table 1 MDAs for the 8672ATME and 8672ATMM modules Portiype modei Cable ype Connector ype The OC 3c STM 1 and OC 12c STM 4 MDAs for the 8672ATME and 8672ATMM modules are Class 1 laser products as identified by the label on the MDA See the following figure Figure 4 Product label for the 8672ATME and the 8672ATMM module MDA OC 3c STM 1 and OC 12c STM 4 Nortel Ethernet Routing Switch 8600 Installation Media Dependent Adapters for the 8672ATME and 8672ATMM Modules NN46205 316 01 01 Standard 30 May 2008 Copyright 2008 Nortel Networks 27 Media Dependent Adapter installation for the 8672ATME and 8672ATMM modules This section provides procedures for installing MDA for the 8672ATME and 8672ATMM modules Prerequisites Verify that you have the following tools and materials Phillips screwdriver 1 Navigation Estimated installation time page 27 Installing an MDA page 28 Replacing an MDA page 31 Connecting fiber cables page 32 Connecting coaxial cables page 34 Estimated installation time The following table lists the estimated time to install the MDAs Estimated time for installation Table 2 Task and estimated time Laying the Asynchronous Transfer Mode ATM module on 2 minutes an antistatic surface Removing Media Dependent Adapter MDA slot covers Nortel Ethernet Routing Switch 8600 Installation Media D
27. rtel Networks 25 MDA overview The MDAs for the Nortel 8672ATME and 8672ATMM modules are modular port adapters that are installed on the Ethernet Routing Switch 8600 The 8672 ATM modules are part of the Nortel 8000 Series line of communications products There are two versions of the ATM modules the 8672ATME module and the 8672ATMM module unless otherwise specified the term 8672ATM modules refers to both versions Each module has two slots for MDAs Install any two of the following MDAs e 1 port OC 12c STM 4 see Figure 1 OC 12c STM 4 MDA 8672ATME and 8672ATMM modules page 25 e 4 port OC 3c STM 1 see Figure 2 OC 3c STM 1 MDA 8672ATME and 8672ATMM modules page 25 e 2 port DS 3 see Figure 3 DS 3 MDA 8672ATME and 8672ATMM modules page 26 Figure 1 OC 12c STM 4 MDA 8672ATME and 8672ATMM modules Figure 2 OC 3c STM 1 MDA 8672ATME and 8672ATMM modules Nortel Ethernet Routing Switch 8600 Installation Media Dependent Adapters for the 8672ATME and 8672ATMM Modules NN46205 316 01 01 Standard 30 May 2008 Copyright 2008 Nortel Networks 26 MDA overview Figure 3 DS 3 MDA 8672ATME and 8672ATMM modules 10530EB Each MDA has ports for connection to an ATM network OC 3c STM 1 and OC 12c STM 4 MDAs support concatenated transmission The flexibility of connectivity is achieved by mixing different types of MDAs The following table shows the available types of MDAs fo
28. scariche elettrostatiche indossare sempre un polsino antistatico collegato a una presa di scarico elettrostatico ESD durante la manutenzione del prodotto Accertarsi che il polsino sia a contatto con la pelle Nortel Ethernet Routing Switch 8600 Installation Media Dependent Adapters for the 8672ATME and 8672ATMM Modules NN46205 316 01 01 Standard 30 May 2008 Copyright 2008 Nortel Networks A0 a __ No Installation Media Depen and 8672ATMM Modules Copyright O 2008 Nortel Networks 41 Appendix MDA and LED specifications See the following sections for Media Dependent Adapters MDAs and Light Emitting Diode LED specifications MDA specifications The OC 3c STM 1 MDA uses SONET STS 3c SDH STM 1 1300 nanometer nm optical transceivers with MT RJ fiber optic connectors and either single mode fiber SMF or multimode fiber MMF cabling The following table describes the 8672ATME and 8672ATMM modules MDA specifications of OC 12c STM 1 and OC 3c STM 4 port type Table 3 8672ATME and 8672ATMM modules MDA specifications OC 12c STM 1 and OC 3c STM 4 Operating Port type wavelength Operating power Data rate OC 12c STM 4 1274 to 1356 nm 14 to 20 dBm 622 08 Mbit s 1260 to 1360 nm 8 to 15 dBm 622 08 Mbit s OC 3c STM 1 1274 to 1356 nm 14 to 20 dBm 155 52 Mbit s 1260 to 1360 nm 8 to 15 dBm 155 52 Mbit s The following table describes the OC 3c STM 1 MDA specifications Table
29. the installation of use of and results obtained from the Software 1 Licensed Useof Software Nortel Networks grants Customer a nonexclusive license to use a copy of the Software on only one machine at any one time or to the extent of the activation or authorized usage level whichever is applicable To the extent Software is furnished for use with designated hardware or Customer furnished equipment CFE Customer is granted a nonexclusive license to use Software only on such hardware or CFE as applicable Software contains trade secrets and Customer agrees to treat Software as confidential information using the same care and discretion Customer uses with its own similar information that it does not wish to disclose publish or disseminate Customer will ensure that anyone who uses the Software does so only in compliance with the terms Nortel Ethernet Routing Switch 8600 Installation Media Dependent Adapters for the 8672ATME and 8672ATMM Modules NN46205 316 01 01 Standard 30 May 2008 Copyright O 2008 Nortel Networks 18 Software license of this Agreement Customer shall not a use copy modify transfer or distribute the Software except as expressly authorized b reverse assemble reverse compile reverse engineer or otherwise translate the Software c create derivative works or modifications unless expressly authorized or d sublicense rent or lease the Software Licensors of intellectual property to Nortel Networks are benefic
30. tioning the MDA so that the front aligns with the front of the 8672ATME or the 8672ATMM module 4 Align the four holes on the MDA with the mounting posts on the 8672ATME or the 8672ATMM module 5 Press firmly on the MDA in the middle of the back to seat the MDA in the mounting posts on the module Apply about 20 pounds of pressure When the MDA is seated properly the posts of the module are visible in the holes of the MDA 6 Insert the Phillips pan head screws through the holes Use a 1 Phillips screwdriver to tighten the screws Tighten the rear screws first before you tighten the front screws Nortel Ethernet Routing Switch 8600 Installation Media Dependent Adapters for the 8672ATME and 8672ATMM Modules NN46205 316 01 01 Standard 30 May 2008 Copyright 2008 Nortel Networks 30 Media Dependent Adapter installation for the 8672ATME and 8672ATMM modules T gt lt d ui 2 Attach the supplied laser product label to the front panel of the host module immediately below the MDA Use the label that is printed in the appropriate language for the country where you are installing the equipment End Nortel Ethernet Routing Switch 8600 Installation Media Dependent Adapters for the 8672ATME and 8672ATMM Modules Copyright 2008 Nortel Networks NN46205 316 01 01 Standard 30 May 2008 Replacing an MDA Replacing an MDA 31 This procedure describes how to replace an MDA CAUTION Risk of serv
31. tors See Figure 5 OC 12c STM 4 MDA duplex SC connector with dust caps page 32 Also the OC 3c STM 1 MDA uses MT RJ connectors See Figure 6 OC 3c MDA STM 1 MT RJ connector with dust cap page 32 Figure 5 OC 12c STM 4 MDA duplex SC connector with dust caps Figure 6 OC 3c MDA STM 1 MT RJ connector with dust cap 9889FA Procedure steps Step Action 1 Remove the protective dust plug from the connector on the installed MDA Store the dust plug for later use Nortel Ethernet Routing Switch 8600 Installation Media Dependent Adapters for the 8672ATME and 8672ATMM Modules NN46205 316 01 01 Standard 30 May 2008 Copyright 2008 Nortel Networks Connecting fiber cables 33 989 FA 2 Remove the protective dust caps from the connector on the fiber cable Store the dust caps for later use 9890FA 3 Hold the fiber cable connector so the keyed surface will insert easily into the MDA connector Carefully insert the cable connector into the MDA connector and push gently Nortel Ethernet Routing Switch 8600 Installation Media Dependent Adapters for the 8672ATME and 8672ATMM Modules NN46205 316 01 01 Standard 30 May 2008 Copyright 2008 Nortel Networks 34 Media Dependent Adapter installation for the 8672ATME and 8672ATMM modules 9888FA End Connecting coaxial cables This procedure describes how to connect coaxial cables to the MDA ATTENTION The DS 3 MDA uses bayonet Neill Concelman BNC
32. vide information about how to avoid a situation or condition that can cause serious personal injury or death from high voltage or electric shock DANGER La mention Danger Tension lev e fournit des informations sur les moyens de pr venir une situation ou une condition qui pourrait entra ner un risque de blessure grave ou mortelle la suite d une tension lev e ou d un choc lectrique DANGER GEFAHR Hinweise mit Vorsicht Hochspannung bieten Informationen dazu wie man Situationen oder Umst nde verhindert die zu schweren Personensch den oder Tod durch Hochspannung oder Stromschlag f hren k nnen Nortel Ethernet Routing Switch 8600 Installation Media Dependent Adapters for the 8672ATME and 8672ATMM Modules Copyright 2008 Nortel Networks NN46205 316 01 01 Standard 30 May 2008 14 Regulatory Information and Safety Precautions DANGER PELIGRO Los avisos de Peligro Alto voltaje brindan informaci n acerca de c mo evitar una situaci n o condici n que cause graves lesiones a personas o la muerte a causa de una electrocuci n o de una descarga de alto voltaje DANGER PERIGO Avisos de Perigo Alta Tens o oferecem informa es sobre como evitar uma situa o ou condi o que possa causar graves ferimentos ou morte devido a alta tens o ou choques el tricos DANGER PERICOLO Le indicazioni Pericolo Alta tensione forniscono informazioni per evitare situazioni o condizioni che potre
33. witch 8600 Installation Media Dependent Adapters for the 8672ATME and 8672ATMM Modules NN46205 316 01 01 Standard 30 May 2008 Copyright 2008 Nortel Networks LEDs 43 Table 7 MDA LED indications Haw oor Sue pes TT TX Green Steady Indicates network activity for the corresponding port A very low level of network activity approximately 1 5 pps can cause the LED to blink I loft The port is not transmitting data no network activity Amber Blinking The port is out of order the administrative state is down RX Green Blinking Indicates network activity for the corresponding port the port is receiving traffic Steady The port is operational no network activity Amber Blinking The port is not operational the administrative state is down A Remote Defect Indication RDI alarm condition has been detected the administrative state is down The RDI alarm condition indicates that a failure occurred at the far end of the network In ATM when the physical layer detects loss of signal or cell synchronization RDI cells are used to report a VPC VCC failure RDI cells are sent upstream by a VPC VCC endpoint to notify the source VPC VCC endpoint of the downstream failure The port is not operational Be sure that the MDA is fully seated in the slot check that the port is properly configured Nortel Ethernet Routing Switch 8600 Installation Media Dependent Adapters for the 8672ATME and 8672ATMM Modules NN4
Download Pdf Manuals
Related Search