NEC NP3150CM User's Manual
Contents
1. NEC NEC Display Solutions of America Inc Installation and Assembly Manual Custom Ceiling Mount for NEC NP1000 NP2000 NP1150 NP2150 NP3150 NP3151W NP1250 NP2250 NP3250 and NP3250W Projectors Model NP3150CM Ceiling Mount i 2 A E A 10 11 Remove 1 4 20 button head bolt on ceiling plate to remove lower portion of mount Install the ceiling plate with 4 5 16 bolts to structural attachment points Lag screws may be used when attaching to wood joists Reattach the lower portion of the mount Attach interface plate pn 72 061 to projector with 4 M4 x 10 pan head Phillips screws Align interface plate into holes on mount slide stand off bolts into slots and tighten Add center locking Torx cap screw which attach secures the interface plate to the mount Attach the wire safety rope to the interface plate with the enclosed coupler Attach power and signal cables to projector Attach the I O cover pn 72 065 to the interface plate with 4 10 32 x 3 8 pan head Phillips screws and 10 lock washers Loosen tilt adjustment cap screw with enclosed tool and level the projected image to the screen Tighten cap screw when a level image is achieved Loosen up down pitch adjustment cap screw with enclosed tool and adjust the pitch angle of the projector Tighten cap screw when at desired projection position If desired add Kensington lock through the opening of the mount head loop through cable end and a2. rs 8 Adjust left to right yaw When desired position is attained tighten locking ring on pipe to mount 9 Loosen tilt adjustment cap screw with enclosed tool and level the projected image to the screen Tighten cap screw when a level image is achieved 10 Loosen up down pitch adjustment cap screw with enclosed tool and adjust the pitch angle of the projector Tighten cap screw when at desired projection position 11 If desired add Kensington lock through the opening of the mount head loop through cable end and attach to projector fs T Be a FP GPREE NOTES J ae OSE HOTE POS acti N on ie F air _AD Customer SUPPLIED HEC WETANE EE eet AC AAT M eS ret 1 ET ee A O AELE T aia LH E F THLE HUT FOR BEAT AT Ti J ed fia Ei SLEEVE LENG DOPE ES 1 FLER F E K REA Eji paee nioo f Mi WAS BTL ZI ae ee ee a ee eo 4 mi I oud i pi Tepe BHi PTE SA f icc br Tei Te era EET POLE MOUNT 5880 Sheridan Boulevard Arvada Colorado 80003 Ph 303 412 0399 Fax 303 412 9346 www displaydevices com
3. ttach to projector fa ii Fa TE THE NOTE T r l ink r i io DI NOTE iT a r E i 7 oif a S ah wii aii i T K U Se Ca mon __ AM MOUNT ADAPTER MEG PIA i 1 Lt rit oR PL Ee a if re aia ue Am a T LYE i THRAS HUT POR STAT WANTS Sere ry WIE 1E Tek iF Ps ae SLEEVE SMS COPPER 1T ca ee 1G Le HEA Bi M l EEEn IL Th MOOO Ta a a Ai FI WASHER Tia D J ERL BHL LE ATHEN RTL E J a a ae u ane ee PTE TA CEUNG MOUNT 5880 Sheridan Boulevard Arvada Colorado 80003 Ph 303 412 0399 Fax 303 412 9346 www displaydevices com Pole Mount 1 Install a 1 12 NPT pipe with male threads on lower end from the ceiling Aftermarket mounting pans and accessories are available 2 Thread locking ring onto pipe Thread mount onto pipe and leave locking ring loose 3 Attach interface plate pn 72 061 to projector with 4 M4 x 10 pan head Phillips screws 4 Align interface plate into holes on mount slide stand off bolts into slot and tighten Add center locking Torx cap screw which attach secures the interface plate to the mount 5 Attach the wire safety rope to the interface plate with the enclosed coupler 6 Insert power and signal cables through pipe and out the top of the mount head to the projector and attach to projector 7 Attach the I O cover pn 72 065 to the interface plate with 4 10 32 x 3 8 pan head Phillips screws and 10 lock washe
Download Pdf Manuals
Related Search