Home

NEC Express5800/R120d-2E SR User's Guide

1. Table 4 9 Specific commands of cmps lt Component Name gt map expup mods lt Module Name gt Command Description load Updates or installs the specified module Refer to section 4 2 1 2 and 4 2 2 for more information delete Uninstalls the specified module Refer to section 4 2 3 for more information Example show cmps lt Component Name gt map expup mods lt Module Name gt command enables you to view information about the module lt Module Name gt of the component lt Component Name gt gt show cmps Server01 map expup mods NEC ExpressUpdate Agent ufip cmps Server01 map expup mods NEC ExpressUpdate Agent ufit NEC ExpressUpdate Agent Targets uppkgs Properties Module NEC ExpressUpdate Agent ExpUpStatus NOT_LATEST Version 3 0 Severity HIGH LatestApplyResult 4 1 2011 12 00 00 Applying the update package has been completed successfully NEC ExpressUpdate Agent 1 0 gt 2 0 Verbs exit help show load delete 4 1 3 2 Information of groups Information about each module is displayed at the below target grps grpset lt Group Name gt expup mods lt Module Name gt Properties and specific commands of this target are as follows Table 4 10 Properties of grps grpset lt Group Name gt expup mods lt Module Name gt Property Access Description Module read Displays a name of this module ExpUpStatus read Displays NEC ExpressUpdate status of this module Each status
2. Description f force Even if the repository is shared and the specified update packages are referred to by other repository the update packages are deleted Examples delete command enables you to remove all update packages gt delete repository uppkgs COMMAND COMPLETED NEC ExpressUpdate Agent_Windows_3 00_03022011171440 was deleted NEC ExpressUpdate Agent_Linux_3 00_03102011100740 was deleted In the case of the user authority is Operator Change Environment Setting of the user level must be enabled 40 4 3 3 2 Removing the update package Removing update package is located at the following target repository uppkgs lt uppkg name gt Specific command of this target is as follow There is no property for this target Table 4 30 Specific command of repository uppkgs lt uppkg name gt Command Description delete Removes update package Specific option of this command is as follow Table 4 31 Specific option of repository uppkgs lt uppkg name gt Option Description f force Even if the repository is shared and the specified update package is referred to by other repository the update package is deleted Examples delete command enables you to remove the update package gt delete repository uppkgs System BIOS_Windows_4 0_02172011105550 COMMAND COMPLETED System BIOS_Windows_4 0_02172011105550 was deleted CHECK In the case of the use
3. Specific option of this command is as follow Table 4 26 Specific options of repository Option Description wait Watches it until the downloading of the update packages is completed This option is valid only when you download without adding source option source When you add the specified update package to repository you specify the update package file path f force Adds the update package specified by source option to the repository even if it is not necessary for the components Examples load command enables you to download update packages gt load repository COMMAND COMPLETED Downloading update packages Run the show command to the repository and you can confirm the command s result from UpdatePkgLatestDownloaded property The download process will start and return to the input prompt To confirm this command results run show command and confirm UpdatePkgLatestDownloded property This value is updated at the downloading end time UpdatePkgLatestDownloaded 4 1 2011 12 00 00 Examples load wait command enables you to watch it until downloading is completed gt load wait repository Downloading update packages Press Ctrl D to stop monitoring Downloading update packages was finished Please press Ctrl D The download process will start and progress will be displayed When downloading is finished an end message is displayed A
4. command enables you to view NEC ExpressUpdate information of the group lt Group Name gt gt show grps grpset root expup ufip grps grpset root expup ufit expup Targets mods Properties RepositoryLocation LOCAL ExpUpStatus NOT_LATEST UpdatePkgLatestDownloaded 4 1 2011 01 00 00 NextDownloadDate 4 2 2011 01 00 00 Verbs cd exit help show load stop 4 1 2 Displaying a list of modules 4 1 2 1 Information of components A list of modules for the specified component is displayed at the below target cmps lt Component Name gt map expup mods Property of this target is as follow There is no specified command for this target Table 4 6 Property of cmps lt Component Name gt map expup mods Property Access Description EntryCount read Displays a number of modules managed by NEC ExpressUpdate 26 Example show cmps lt Component Name gt map expup mods command enables you to view a list of modules for the specified component lt Component Name gt gt show cmps Server01 map expup mods ufip cmps Server0 1 map expup mods ufit mods Targets System BIOS BMC Firmware NEC ExpressUpdate Agent Properties EntryCount 3 Verbs ed exit help show 4 1 2 2 Information of groups A list of modules for components belongings to the specified group is displayed at the below target grps grpset lt Group Name gt expup mods Property of this target is as follow Th
5. 4 3 Repository and Update package management ccescesssceseeeeeseceeesecseeseceeeeecsaeceeesecseeeeeneeeeeaees 35 43 Repository SEM il a 35 4 3 2 Adding update packages to TePOSILOTY ee eee eeesseeseeseceeeeceeeccsseeeesecseesecsereecsaeeeeaesateeeenees 39 4 3 3 Removing update packages from repository ee eeeeecseeeeceeeeecseeeeesecaeesecneesecsaeeeesaeceteseenees 40 4 3 4 Update packages information cee ccssecssesecseeseceseeecseceeesecseesecneeeesaeceessecaesseseeesaecaeeeeenees 41 Chapters hop management sis c sesstssees ii tit 45 5 1 RRA 45 LT Application log Ustedes its 45 5 12 Application dB it 46 3 1 3 NEC ExpressUpdate A gent lo umi o ii 47 Chapter6 Troubleshooting ica Ai 48 6 1 ELO MESSAGE A di 48 Chapter TEMIDO OY ii E 49 Trademarks NEC EXPRESSBUILDER and NEC ESMPRO are registered trademarks of NEC Corporation Microsoft Windows Windows Vista Windows Server are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries All other company or product names used in this document are registered trademarks or trademarks of their respective trademark owners Windows 7 stands for Windows 7 Professional operating system and Windows 7 Ultimate operating system Windows Server 2008 R2 stands for Windows Server 2008 R2 Standard operating system Windows Server 2008 R2 Enterprise operating system and Windows Server 2008 R2
6. It is not possible to update a module under this status LATEST_CONDITION The repository has no update package newer than current version INSTALLATION_FATLED This status shows that the last update command was unsuccessful This status is cleared by rebooting the system A reason of the failure is shown in application logs Refer to section 5 1 1 and 5 1 2 to get more information about the application log It is not possible to update a module under this status ACCESS_FATLED There is no communication to NEC ExpressUpdate Agent UNKNOWN Failed to get version information because the repository has incompatible packages Updating NEC ESMPRO Manager is required NO_PACKAGE The repository has no package INSTALLABLE The specified software is installable Table 4 3 Specific commands of cmps lt Component Name gt map expup Command Description load Updates all modules of lt Component Name gt to the latest version Refer to section 4 2 1 1 for more information stop Cancels all update command to lt Component Name gt Refer to section 4 2 4 1 for more information Example show cmps lt Component Name gt map expup command enables you to view NEC ExpressUpdate information of the component lt Component Name gt gt show cmps Server01 map expup ufip cmps Server01 map expup ufit expup Targets mods uninstalled Properties RepositoryLocation LOCAL ExpUp
7. This option is supported by show command Type can specify the following items If there are multiple types they must be separated by commas targets lt name gt Shows the target When lt name gt is specified the target that matches lt name gt is displayed If there are multiple lt name gt they must be surrounded by parenthesis and separated by commas properties lt name gt Shows properties When lt name gt is specified the property that matches lt name gt is displayed If there are multiple lt name gt they must be surrounded by parenthesis and separated by commas verbs Shows supported commands 13 Examples 1 Shows only targets Show d Targets 2 Shows target whose name is server01 and supported commands show d targets server0Ql verbs 3 Shows property whose name is Name or Status and shows supported commands show d properties Name Status verbs 1 5 3 Specific options This section describes NEC ESMPRO Manager specific options exclude lt arg gt lt arg gt Description Specifies exceptional items This option is effective when the target is group cmp lt name gt lt name gt lt name gt Specifies exceptional items using component names If there are some lt name gt they must be separated by comma and surrounded by parentheses grp lt name gt lt name gt lt name gt Specifies
8. esmcli is created on usr bin directory esmcli has two mode interactive shell mode and non interactive one liner mode 1 4 1 Shell mode In this mode you can execute CLI commands interactively 1 4 1 1 Logging in to the shell mode To start the shell mode enter the following command from a command line Then input a user name and password of NEC ESMPRO Manager Please refer to 1 5Basic commands for information about CLI commands esmcli Option esmcli The NEC ESMPRO Manager command line interface command Option Input an option There are following options h help Display the syntax of esmcli commands When this option is specified the shell mode does not start u user lt user name gt Specifies an user name of NEC ESMPRO Manager At the time of login the input of the user name is omitted p pswd lt password gt Specifies an user password of NEC ESMPRO Manager At the time of login the input of the user password is omitted e The password at the time of the login can input the password that encrypted in 1 4 3Encrypting of the password Examples If username and password are not specified at command line options enter them at following prompts gt esmcli user passwd Examples When you specify the user name and the password at command line please input as follows esmcli u Administrator p password Examples When you specify the encry
9. Datacenter operating system Windows Server 2008 stands for Windows Server 2008 Standard operating system Windows Server 2008 Enterprise operating system Windows Server 2008 Datacenter operating system and Windows Server 2008 Foundation Windows Vista stands for Windows Vista Business operating system Windows Vista Enterprise operating system and Windows Vista Ultimate operating system Windows Server 2003 stands for Windows Server 2003 Standard Edition operating system Windows Server 2003 Enterprise Edition operating system Windows Server 2003 Standard x64 Edition operating system and Windows Server 2003 Enterprise x64 Edition operating system Windows Server 2003 R2 stands for Windows Server 2003 R2 Standard Edition operating system Windows Server 2003 R2 Enterprise Edition operating system Windows Server 2003 R2 Standard x64 Edition operating system and Windows Server 2003 R2 Enterprise x64 Edition operating system Windows XP stands for Windows XP Professional operating system and Windows XP Professional x64 Edition operating system All names used in sample applications are fictitious They are unrelated to existing product organization or individual names E Notes 1 No part of this document may be reproduced in any form without the prior written permission of NEC Corporation 2 The contents of this document may be revised without prior notice 3 The contents of this document sha
10. ESMPRO Manager At the time of login the input of the user name is omitted p pswd lt password gt Input user password of NEC ESMPRO Manager At the time of login the input of the user password is omitted CLI Command Surround the CLI command to execute with e The password at the time of the login can input the password that encrypted in se a OP THE WO A ct aaa ain ce sea toa eae asta otal Dare Examples Following command enables you to execute show command esmcli u Administrator p password show Examples Using an encrypted password please input it as follows esmcli u Administrator p ENC c10f239c9f7d203fa4424bffb06b6713 show 1 4 2 1 Notes on executing one liner mode 1 When entering special characters When input double quotation in CLI command please set before double quotation The following shows examples esmcli u Administrator p password show empsA server 01 map expup 1 4 3 Encrypting of the password The esmclipasswd command is used for encrypting of the password To encrypt the password enter the command following the command prompt as shown below esmclipasswd Option lt Password gt esmclipasswd Indicates the NEC ESMPRO Manager command line interface command Option Input an option There are following types of option h help Display the command syntax of the esmclipasswd command When this option is appoi
11. NEC ESMPRO Manager Ver 5 4 or later is installed on NEC ESMPRO Manager command line interface requires following user level of operating system On Windows Administrator On Linux root CHECK In case of Windows Vista Windows 7 Windows Server 2008 and Windows Server 2008 R2 you need to set the permission to access to the directory including Command Line Interface execution file esmcli exe After setting the permission the standard user can also use Command Line Interface e See NEC ESMPRO Manager Ver 5 Installation Guide for information about system requirements of NEC ESMPRO Manager 1 3 Configuring examples When the client PC is different from the management PC log in to the management PC using remote desktop Telnet SSH clients etc Examples When NEC ESMPRO Manager is installed on Windows environments Client PC Management PC Managed Component TCP IP Y NEC ESMPRO Manager I I i I I I I i i I I Examples When NEC ESMPRO Manager is installed on Linux environments Client PC Management PC Managed Component TCP IP Telnet SSH 1 4 Using the command line All commands in this document are executed by esmcli command When you install NEC ESMPRO Manager esmcli command is also installed on the following directories a Windows OS C Program Files ESMPRO ESMMNG bin This path is added to the system environment variable PATH a Linux OS opt nec es_manager bin A symbolic link to
12. address of the proxy server ProxyPort read write Sets the port number of the proxy server ProxyUser read write Sets the user name with which the repository connects to the proxy server ProxyPassword read write Sets the user password with which the repository connects to the proxy server This is displayed in Nik ck ck ok k Table 4 21 Specific commands of repository localsetting Command Description set Sets local repository settings properties 36 Examples show command enables you to view local repository settings gt show repository localsetting ufip repository localsetting ufit localsetting Targets Properties RepositoryPassword AutoUpdate VALID Updatelnterval EVERY_SATURDAY UpdateStartTime 23 50 ProxyAddress ProxyPort 0 ProxyUser ProxyPassword Verbs cd exit help show set Examples set command enables you to set one or more local repository settings properties If there are multiple properties on the same command line they must be separated by a space When you enable automatic downloading run the following command set repository localsetting AutoUpdate VALID When you set the schedule type run the following command set repository localsetting UpdateInterval EVERY_SATURDAY When you set downloading time run the following command set repository localsetting UpdateStartTime 23 50 When you set the IP address and th
13. commands delete command enables you to uninstall a module Refer to the section 4 1 3 1 for more information about this target cmps lt Component Name gt map expup mods lt Module Name gt Specific option of this command is as follow Table 4 17 Specific option of cmps lt Component Name gt map expup mods lt Module Name gt Option Description reboot Enables NEC ExpressUpdate to reboot the system if the uninstallation requires it In the case of the user authority is Operator Install Update Packages of the user level must be enabled Example load cmps lt Component Name gt map expup mods lt Module Name gt command enables you to uninstall an module lt Module Name gt from the specified component lt Component Name gt gt load cmps Server01 map expup mods NEC ExpressUpdate Agent COMMAND COMPLETED Uninstall was started Run the show command to the each module element and you can confirm this command s progress from ExpUpStatus property Run the show command to the each module element under the uninstalled element and you can confirm this command s result from LatestApplyResult property 33 4 2 4 Cancelling update commands 4 2 4 1 For components stop command at below targets enables you to cancel updates Refer to the section 4 1 1 1 for more information about this target cmps lt Component Name gt map expup There is no specific option for this command e In the case of the user a
14. managed server and that updates the modules Available since NEC ESMPRO Manager Ver5 1 NEC ExpressUpdate Agent Software that provides NEC ExpressUpdate function It is installed on the managed component and communicates with NEC ESMPRO Manager Module The module like firmware and software Update package The package which the update tool of the module is included in Update package server The update package server from where the repository downloads update packages Repository The component of the NEC ESMPRO Manager for NEC ExpressUpdate that downloads update packages from the update package server and manages them Available since NEC ESMPRO Manager Ver5 1 Revision History 1 00 1 01 2011 05 11 Initial edition 2011 10 13 Changes cover NEC ESMPRO Manager Ver 5 Command Line Interface User s Guide for NEC ExpressUpdate NEC Corporation 2011 50
15. user level must be enabled Example load cmps lt Component Name gt map expup command enables you to update all modules of the specified component lt Component Name gt gt load reboot cmps Server01 map expup COMMAND COMPLETED Updating was started Run the show command to the each module element and you can confirm this command s progress from ExpUpStatus property Run the show command to the each module element and you can confirm this command s result from LatestApplyResult property cmps Server01 map expup mods NEC ExpressUpdate Agent If the update is in progress ExpUpStatus property of show cmps lt Component Name gt map expup mods lt Module Name gt command shows the progress gt show cmps Server01 map expup mods NEC ExpressUpdate Agent ufip cmps Server01 map expup mods NEC ExpressUpdate Agent ufit NEC ExpressUpdate Agent Targets uppkgs Properties Module NEC ExpressUpdate Agent ExpUpStatus UNDER_INSTALLATION 5 Version 2 0 Severity HIGH LatestApplyResult 4 1 2011 12 00 00 Applying the update package has been completed successfully NEC ExpressUpdate Agent 1 0 gt 2 0 Verbs cd exit help show load delete 30 e Ifthe update has been finished the result is shown in LatestApplyResult property of show cmps lt Component Name gt map expup mods lt Module Name gt command LatestApplyResult 4 1 2011 12 00 00 Applying the update pac
16. ESMPRO SM Common Component is running NW Linux OS Please confirm that the following process is running by ps aux command opt nec es_manager jre bin java com nec jp dianascope CoreServer Chapter7 Terminology Table 7 1 Terminology Term Description CLI Command Line Interface BMC Baseboard Management Controller The management controller to manage the interface between system management software and platform hardware DMTF Distributed Management Task Force An industry standard body that defines WBEM standards for the industry SMASH Systems Management Architecture for Server Hardware A suite of specifications that deliver industry standard protocols to increase productivity of the management of a data center Address Space A set of instances that represent managed element or provided functions These instances are accessed using a unique path Managed Element An instance of managed element or provided function on NEC ESMPRO Manager It constructs the address space UFiT User Friendly instance Tag User friendly identifier for a specific instance of a CIM class UFiP User Friendly instance Path The unique path to an instance formed by concatenating the UFiTs of each instance from the root instance to the terminating instance Component An object that is managed by NEC ESMPRO Manager NEC ExpressUpdate The function that manages versions of modules like firmware and software on the
17. Examples show commands enable you to view the list of NEC ESMPRO Manager application log gt show logs ufip logs ufit logs Targets log0 log1 log2 log3 log4 log5 log6 log7 log8 log9 log10 log74 Properties EntryCount 75 MaxEntryCount 2000 Verbs cd exit help show dump 45 Examples dump commands enable you to save application logs to the specified directory Add destination option and specify the directory path to save file The following shows an example gt dump destination CNtemp COMMAND COMPLETED C temp LOG zip If you want to save the application log file any name specify the zip file name to the path and execute commands dump destination C temp application_log zip logs When you add force option the zip file is overwritten dump destination C temp application_log zip force logs 5 1 2 Application log Information of NEC ESMPRO Manager application log is located at the following target Nogs lt log gt Property of this target is as follow There is no specified command for this target Table 5 4 Properties of logs lt log gt Property Access Description Type read Displays the type of application log e INFORMATIOIN e WARNING e ERROR ComponentName read Displays the component name IpAddress read Displays the OS IP address of the component BmclIpAddress read Displays the BMC IP addr
18. Express 5800 NEC Command Line Interface User s Guide for NEC ExpressUpdate Chapter1 Chapter2 Chapter3 Chapter4 Chapter5 Chapter6 Chapter7 About Command Line Interface Component management Group management NEC ExpressUpdate Log management Troubleshooting Terminology Rev 1 01 NEC Corporation 2011 Contents Contents s3aiaiiiiieauioh e dus darts Aha ales hd aia amie sols 2 Trademarks iii A Ao 3 About This Document necia 4 Chapter About Command Line Interface oo eects i eae aia A eaa eA iA 5 1 1 OVELVIEW A A a AR 5 1 2 System Requirements Dino 5 1 3 Configuring examples oia od 6 1 4 Using the command Mem a eR tek a e a eet e eee ee eee eee 7 EAT Shell mode cui iaa 7 L42 One hitler moderation 9 1 4 3 Encrypting of the password cc ccescssescseeseceseeeeseceeesecsevsccsaseecsaecaeaecseesesnaeeeesaeeeeaecaeeeeenees 9 1 5 Basic comman dS 5 coed lasas dae set euvesas e acess fs REESE NE ce saueak evades cy od ERROSE e Aeneas ede aS 11 Lal P 1 E A siya iia ieee Re a ee i ee 13 1 5 2 Basic POD ip ii 13 1 5 3 Specific options ca A ded din 14 1 6 Example of command outputs sets eee eeeh e eres n a epeen eaea oaase eae aen Sai eiS 15 1 7 Diagram of the entire address Space ssessseeeesesseesiseseessssstststertstetsstsrsttetstssrseseettetetssesrstereetetnses 16 Cha pter2 Component management sananne a clerical lia 18 2 1 Component information cs ceceeecsesscsseeeeeecseese
19. Password Verbs cd exit help show set Examples set command enables you to set one or more remote repository settings properties If there are multiple properties on the same command line they must be separated by a space If you want to set repository location in remote it is necessary to set RemoteRepositoryAddress RemoteRepositoryPort and RemoteRepositoryPassword properties set repository remotesetting RemoteRepositoryAddress 192 168 0 100 RemoteRepositoryPort 8080 RemoteRepositoryPassword password When the correct value is set repository location is changed in remote e The following properties must be specified when repository location is set to remote e RemoteRepository Address e RemoteRepositoryPort 38 e RemoteRepositoryPassword e In the case of the user authority is Operator Change Environment Setting of the user level must be enabled Examples When you add force option properties are set by force set force repository remotesetting RemoteRepository Address 192 168 0 111 4 3 2 Adding update packages to repository load command at below targets enables you to add or download update packages repository Specific command of this target is as follow There is no property for this target Table 4 25 Specific command of repository Command Description load Downloads update packages from update package server Adds update packages to repository
20. Status NOT_LATEST UpdatePkgLatestDownloaded 4 1 2011 01 00 00 NextDownloadDate 4 2 2011 01 00 00 Model Express5800 110Ge S OsVersion Microsoft Windows Vista Business Service Pack 2 x64 NextUpdateDate 5 1 2011 12 00 Verbs cd exit help show load stop 4 1 1 2 Information of groups show command at the below target enables you to view NEC ExpressUpdate information about the specified group grps grpset lt Group Name gt expup Properties and specific commands of this target are as follows Table 4 4 Properties of grps grpset lt Group Name gt expup Property Access Description ExpUpStatus read Displays NEC ExpressUpdate statuses Each status is listed in Table 4 2 RepositoryLocation read Displays a location of the repository local remote UpdatePkgLatestDownloaded read Displays the most recent time when the repository was updated If updating has never been executed it shows None NextDownloadDate read Displays time and date of the next repository update if it is scheduled 25 Table 4 5 Specific commands of grps grpset lt Group Name gt expup Command Description load Updates all modules of components belonging to the specified group to the latest version Refer to section 4 2 1 3 for more information stop Cancels all update command to lt Group Name gt Refer to section 4 2 4 2 for more information Example show grps grpset lt Group Name gt expup
21. The stop command stops the target dump Syntax dump destination lt path gt lt options gt lt target gt Description The dump command is used to take a binary image from the target and send it to a specific location 12 1 5 1 Target Each basic command functions to a specified target The target points the managed element by address path much like the path to a file in a file system Both absolute path which is started from and relative path are available for pointing the target Specifically and are supported The means the current default target and the means the parent target Specifying the target enter lt target gt following to each basic command If it is not specified commands functions to a current default target The current default target can be changed by the cd command The current default target is root when the command line interface session is started 1 5 2 Basic options This section describes basic options based on SMASH style h help Description Displays documentation about the command verb When this option is specified the command is not executed This option is supported by all basic commands x examine Description Checks the syntax of the command When this option is specified the command is not executed This option is supported by all basic commands d display lt type gt lt type gt Description Shows information of the selected lt type gt
22. When you modify location of the repository in remote run the following command in the remote repository settings have been set set repository RepositoryLocation REMOTE e When you set RepositoryLocation in REMOTE you should set remote repository settings beforehand See 4 3 1 2Remote repository settings In the case of the user authority is Operator Change Environment Setting of the user level must be enabled 4 3 1 1 Local repository settings You can view and change Manager PC repository settings Local repository settings are located at the following target repository localsetting Properties and specific commands of this target are as follows Table 4 20 Properties of repository localsetting Property Access Description RepositoryPassword read write Sets the password to access repository This is displayed in AutoUpdate read write Sets the automatic updating of the repository The valid values are e INVALID e VALID the repository downloads update packages Updatelnterval read write Sets the schedule type when AutoUpdate is VALID The valid values are e DAILY e EVERY_SUNDAY e EVERY_MONDAY e EVERY_TUESDAY e EVERY_WEDNESDAY e EVERY_THURSDAY e EVERY_FRIDAY e EVERY SATURDAY UpdateStartTime read write Sets downloading time when AutoUpdate is VALID The valid ranges are e 00 00 23 50 Time must be set by the 10 minute Proxy Address read write Sets the IP
23. cecesecsaeceessecseeseeseesecsaeceesecaeesessesecsaseeeeaecateneenees 18 2 1 1 Showing a list of components iere e e ar a a eean eea OAs E ee Ta Ea SERRE Ee raS SPa 18 2 1 2 Showing component information ccc eeceeeecseeseceseeeeesecseesecnereecsaeeecaeceeesecseesaeceeesesaeeeeens 19 Chapter3 Group MADAME 20 3 1 Group information sisone arii A eile Atenas hide 20 ZLI Showing a list Of STOP tacita dps 20 3 1 2 Showing information of SrOUPSCt eee eeeeecseeeeceseeeceseceeesecseeseeseeecsaeceessecseesecneeaeeateneeneeats 21 3 1 3 Showing information Of group seir nenea e n e aaan sirin 22 Chapter4 NEC ExpressUpdate uote 24 4 1 NEC ExpressUpdate information cocccoonccconnnnnoncnnnononononannnonncn nono c nono none Eo EAEE OESE Enpa Ee SEERE aiii 24 4 1 1 Displaying NEC ExpressUpdate informatiQN conccncnicnonnnonocononnoncnnnancnncnncononononn cnn cnnonnnonccnnso 24 4 1 2 Displaying a list of modules 0 ee eee eeceesceesceeceeeeceeceseeeseceeceaecsaecnaecaeecaeeeaeeeeeeeeeeeeeeereeereneees 26 4 1 3 Displaying module information cess eeesesecsseeeeeecseeeecseeseceaeceeesecsessecneeeeesaeeeesaeeaeeeeenees 28 4 2 Update install and tninstal es speise A a 30 ADS Update commands ia ee eA A N 30 4 2 2 Install commit rd a a a e 33 4 2 3 Uninstallcommands c3 etek lel ceil nte 33 4 2 4 Cancelling update commands cece eccsseessesecseeseceseeecsecaeesecseeseceeeeeesaeceessecseeseeeeesaecateseenees 34
24. d Displays a number of groups belonging to the group ComponentCount read Displays a number of components belonging to the group Comment read Displays a comment of the group Components read Displays a list of components belonging to the group Example show command shows information of the group More concrete examples are as follows gt show grps grpset root ufip grps grpset root ufit root Targets group01 group02 expup Properties Name grpset Status NORMAL ExpUpStatus LATEST_CONDITION GroupCount 2 ComponentCount 3 Comment Components server01 server02 server03 Verbs cd exit help show When show command is executed to groups grpall is able to specify as a lt type gt of display option If it is specified all groups are show as hierarchy style Following command shows all groups as hierarchy show display targets grpall 22 Followings are example of the below hierarchy diagram group02 group02 01 group02 01 01 gt show display targets grpall grps grpset root ufip grps grpset root ufit root Targets group01 group01 01 group01 02 group01 02 01 group02 group02 01 group02 01 01 expup 23 Chapter4 NEC ExpressUpdate 4 1 NEC ExpressUpdate information 4 1 1 Displaying NEC ExpressUpdate information 4 1 1 1 Information of components show command at the below target enables you to view NEC ExpressUpdate information abo
25. dition Windows Server 2003 Standard Edition Windows Server 2003 R2 Enterprise Edition Windows Server 2003 R2 Standard Edition Model Express5800 E120b 1 Express5800 T120a M EstimatedTime 1 80s InstallEstimatedTime 120s UninstallEstimatedTime 300s Reboot UNNECESSITY Severity ExpressUpdateSupported SUPPORTED DowngradeSupported UNSUPPORTED MultipleModelSupported SUPPORTED OtherUsed UNOCCUPIED Verbs cd exit help show delete 43 4 3 4 3 Readme file information After saving the readme file you can view the readme file written notes about the update package Information about the readme file in the update package is located at the following target repository uppkgs lt uppkg name gt readme Specific command of this target is as follow There is no property for this target Table 4 33 Specific command of repository uppkgs lt uppkg name gt readme Command Description dump Saves the readme file to specified directory Table 4 34 Specific option of repository uppkgs lt uppkg name gt readme Option Description destination Specifies the directory to save the readme file Required option f force When there is a same name file in the directory of the destination the file is overwritten CHECK The readme file name depends on the update package You can t specify the readme file name when you save it Examples dump command enables you to save the readme file to specified directory Adds d
26. e port number of the proxy server on the same command line run the following command set repository localsetting ProxyAddress 192 168 0 200 ProxyPort 8080 e In the case of the user authority is Operator Change Environment Setting of the user level must be enabled 37 4 3 1 2 Remote repository settings Remote repository settings are located at the following target repository remotesetting Properties and specific commands of this target are as follows Table 4 22 Properties of repository remotesetting Property Access Description RemoteRepositoryAddress read write Sets OS IP address of the other Manager PC RemoteRepositoryPort read write Sets port number of the other Manager PC RemoteRepositoryPassword read write Sets password that is configured in RepositoryPassword on the other Manager PC Table 4 23 Specific commands of repository remotesetting Command Description set Sets remote repository settings properties Table 4 24 Specific option of repository remotesetting Option Description f force Even if it cannot be connected to the other Manager PC repository properties are set by force Examples show command enables you to view remote repository settings gt show repository remotesetting ufip repository remotesetting ufit remotesetting Targets Properties RemoteRepository Address 192 168 0 100 RemoteRepositoryPort 8080 RemoteRepository
27. ere is no specified command for this target Table 4 7 Property of grps grpset lt Group Name gt expup mods Property Access Description EntryCount read Displays a number of modules managed by NEC ExpressUpdate Example show grpset lt Group Name gt expup mods command enables you to view a list of modules for components belongings to the specified group lt Group Name gt gt show grps grpset root expup mods ufip grps grpset root expup mods ufit mods Targets System BIOS BMC Firmware NEC ExpressUpdate Agent Properties EntryCount 3 Verbs cd exit help show 27 4 1 3 Displaying module information 4 1 3 1 Information of components Information about each module is displayed at the below target cmps lt Component Name gt map expup mods lt Module Name gt Properties and specific commands of this target are as follows Table 4 8 Properties of cmps lt Component Name gt map expup mods lt Module Name gt Property Access Description Module read Displays a name of this module ExpUpStatus read Displays NEC ExpressUpdate status of this module Each status is listed in Table 4 2 Version read Displays current version of this module Severity read Displays a severity of the update Severities are as follows e HIGH e MEDIUM e LOW LatestApplyResult read Displays result of the most recent update If updates have never been executed it shows hyphen
28. ess of the component Date read Displays the date when the application log was registered User read Displays the user who executed this operation Contents read Displays the application log Examples show commands enable you to view the NEC ESMPRO Manager application log gt show logs log10 ufip logs log 10 ufit log 10 Targets Properties Type INFORMATION ComponentName Server01 IpAddress 192 168 0 2 BmcIpAddress 192 168 0 3 Date 4 1 2011 12 00 00 User Contents The component was added Verbs ed exit help show 46 5 1 3 NEC ExpressUpdate Agent log Information of NEC ExpressUpdate Agent log is located at the following target cmps lt component name gt map agtlogs expupagtlog IMPORTANT In lt component name gt specify the component that the update function via NEC ExpressUpdate A gent is effective To get NEC ExpressUpdate Agent log NEC ExpressUpdate Agent must be running Specific command of this target is as follow There is no property for this target Table 5 5 Specific commands of emps lt component name gt map agtlogs expupagtlog Command Description dump Saves NEC ExpressUpdate Agent log to the specified directory File is saved in zip format Table 5 6 Specific options of cmps lt component name gt map agtlogs expupagtlog Option Description destination Specifies the destination path of the directory or the file name Absolute path and relati
29. estination option and specifies the path of the directory When you add force option the readme file is overwritten gt dump destination CNemp repository uppkgs NEC ExpressUpdate Agent_Linux_3 00_20110310100740 readme COMMAND COMPLETED C temp readme_en txt When the command succeeds the readme file path is displayed C temp readme_en txt Chapter5 Log management 5 1 Logging You can get the following logs NEC ESMPRO Manager application log NEC ExpressUpdate Agent log 5 1 1 Application log list Information of NEC ESMPRO Manager application logs is located at the following target logs Properties and specific commands of this target are as follows Table 5 1 Properties of logs Property Access Description EntryCount read Displays the number of application log MaxEntryCount read Displays the maximum number of application log Table 5 2 Specific commands of logs Command Description dump Saves NEC ESMPRO Manager application log to the specified directory File is saved in zip format When a file name is not included in the path LOGzip file is saved Table 5 3 Specific option of logs Option Description destination Specifies the destination path of the directory or the file name Absolute path and relative path can be specified Required option f force When there is a same name file in the destination directory the file is overwritten
30. exceptional items using group names If there are some lt name gt they must be separated by comma and surrounded by parentheses ufit lt name gt lt name gt lt name gt Specifies exceptional items using UFIT If there are some lt name gt they must be separated by comma and surrounded by parentheses outputfile lt path gt Description Saves command result to a file of specified path When the file of specified path is not existing new file is created and output it When the file of specified path exists and the file is not an output file of esmcli the command result will be error This option is supported by all basic commands 14 1 6 Example of command output All commands shows results as following format gt lt CLI command gt lt status gt results gt Each status is listed in below table Status COMMAND COMPLETED Table 1 2 Statuses Description Command was successful Following commands skips to show this status cd exit e help how COMMAND PROCESSING FAILED Syntax error was occurred COMMAND EXECUTION FAILED Command was unsuccessful 15 1 7 Diagram of the entire address space A diagram of the entire address space is as follow lt component name gt system map expupagtlog mods uppkgs lt uppkg name gt uninstalled lt module name gt localsetting remotesetting lt uppkg name gt 17 Chap
31. fter the end message you need to press Ctrl D key and return to the input prompt 39 Examples When you stop monitoring during downloading press Ctrl D key and return to the input prompt gt load wait repository Downloading update packages Press Ctrl D to stop monitoring Monitoring was stopped Run the show command to the repository and you can confirm the command s result from UpdatePkgLatestDownloaded property Examples load source command enables you to add update packages to repository Specify the path of the update package file When you add source option you can add update package which is not necessary for components gt load source C temp package_634335370718834422 zip repository COMMAND COMPLETED Added specified update packages System BIOS_Windows_4 0_02172011105550 4 3 3 Removing update packages from repository 4 3 3 1 Removing all update packages Removing all update packages is located at the following target repository uppkgs Properties and specific commands of this target are as follows Table 4 27 Property of repository uppkgs Property Access Description EntryCount read Displays a number of update packages managed by repository Table 4 28 Specific command of repository uppkgs Command Description delete Removes all update packages Specific option of this command is as follow Table 4 29 Specific option of repository uppkgs
32. is listed in Table 4 2 Table 4 11 Specific command of grps grpset lt Group Name gt expup mods lt Module Name gt Command Description load Updates the specified module Refer to section 4 2 1 4 for more information Example show grps grpset lt Group Name gt expup mods lt Module Name gt command enables you to view information about the module lt Module Name gt of the component lt Group Name gt gt show grps grpset root expup mods NEC ExpressUpdate Agent ufip grps grpset root expup mods NEC ExpressUpdate Agent ufit NEC ExpressUpdate Agent Targets uppkgs Properties Module NEC ExpressUpdate Agent ExpUpStatus NOT_LATEST Version 3 0 Severity HIGH LatestApplyResult 4 1 2011 12 00 00 Applying the update package has been completed successfully NEC ExpressUpdate Agent 1 0 gt 2 0 Verbs cd exit help show load delete 29 4 2 Update install and uninstall 4 2 1 Update commands 4 2 1 1 For the specified component load command at the below target enables you to update all modules to the latest version cmps lt Component Name gt map expup Specific option of this command is as follow Table 4 12 Specific option of emps lt Component Name gt map expup Option Description reboot Enables NEC ExpressUpdate to reboot the system if the update requires it In the case of the user authority is Operator Install Update Packages of the
33. kage has been completed successfully NEC ExpressUpdate Agent 2 0 gt 3 0 4 2 1 2 For the specified component and module load command at the below target enables you to update the module lt Module Name gt of the component lt Component Name gt using the specified update package cmps lt Component Name gt map expup mods lt Module Name gt Specific option of this command is as follow Table 4 13 Specific options of cmps lt Component Name gt map expup mods lt Module Name gt Option Description source Specifies the update package f force Enables NEC ExpressUpdate to update the module using an update package which is not latest reboot Enables NEC ExpressUpdate to reboot the system if the update requires it CHECK In the case of the user authority is Operator Install Update Packages of the user level must be enabled e UFIiT of the update package that is referred by source option is shown in the result of show cmps lt Component Name gt map expup mods lt Module Name gt uppkgs command Example load cmps lt Component Name gt map expup mods lt Module Name gt command enables you to update the module lt Module Name gt of the component lt Component Name gt using the specified update package gt load force source 2 0 Icmps Server01 map expup mods NEC ExpressUpdate Agent COMMAND COMPLETED Updating was started Run the show command to the each module elemen
34. ll not be copied or altered without the prior written permission of NEC Corporation 4 All efforts have been made to ensure the accuracy of all information in this document If you notice any part unclear incorrect or omitted in the document contact your authorized NEC sales representative 5 NEC assumes no liability for damages arising from the use of this product nor any liability for incidental or consequential damages arising from the use of this document regardless of 4 About This Document This document introduces command line interface of NEC ExpressUpdate It is a function of the component management utility NEC ESMPRO Manager Before attempting to operate the command line interface read this document so as to gain an adequate understanding of the contents EH Attention This document is intended for persons who are familiar with the operating system s functions and operations and the network s functions and setup For operations and inquiries about the operating system see its online help information This document covers universal information about generally managed components The notes and restrictions on use of each product as a managed component are explained in the user s guide provided with the managed component Names used with screen images in this document are fictitious They are unrelated to existing product names names of organizations or individual names The setting values on the screen images are shown a
35. nted the password doesn t encrypt lt Password gt Input a password to encrypt Examples When you encrypt the password please input it as follows gt esmclipasswd password ENC c 10f239c9f7d203fa4424bffb06b67 13 The encrypted password is displayed on the screen 10 1 5 Basic commands This section describes basic commands These basic commands are based on SMASH style proposed by DMTF Distributed Management Task Force Help string command syntax of each command appears when h help option is specified as the lt options gt of the command The argument placed between and is omissible e Inthe case of the user authority is Administrator the user can execute all basic commands e In the case of the user authority is Operator the user can execute cd exit help and show commands Other commands become executable by setting of the user level The details please identify a chapter of each operation e help cd exit and show commands are supported at all of targets help Syntax help lt options gt lt target gt Description The help command is used to request information related to the use of the CLP When you omit lt target gt the help command will display information about the use of current target cd Syntax cd lt options gt lt target gt Description The cd command is used to change the current default target to the target specified by the lt target gt argumen
36. pository settings Repository settings are located at the following target repository Properties and specific commands of this target are as follows Table 4 18 Properties of repository Property Access Description RepositoryLocation read write Displays and sets location of the repository The valid values are e LOCAL e REMOTE UpdatePackageServerAddress read Displays address of update package server UpdatePkgL atestDownloaded read Displays the date when downloaded update packages last TotalSizeOfUpdatePackage read Displays total size of update packages The unit is MB Table 4 19 Specific commands of repository Command Description set Sets repository settings This command enables you to modify location of the repository load Downloads or adds update packages to repository Examples show command enables you to view the repository settings gt show repository ufip repository ufit repository Targets uppkgs localsetting remotesetting Properties RepositoryLocation LOCAL UpdatePackageServerAddress http www exifs nec co jp UpdatePkgLatestDownloaded 4 1 2011 12 00 00 TotalSizeOfUpdatePackage 34 2MB Verbs cd exit help show load set Examples set command enables you to modify location of the repository When you modify location of the repository in local run the following command set repository RepositoryLocation LOCAL Examples
37. pted password please input as follows See 1 4 3Encrypting of the password esmcli u Administrator p ENC c10f239c9f7d203fa4424bffb06b6713 When the log in is successful esmcli prompt is displayed gt NEC ESMPRO Manager Version5 Copyright C 2004 2011 NEC Corporation All Rights Reserved 1 4 1 2 Logging out of the shell mode To exit the shell mode enter the exit command or input Ctrl C gt exit 1 4 1 3 Keyboard Shortcuts This section describes keyboard shortcuts list Table 1 1 Keyboard Shortcuts Keyboard Shortcuts Description Enter Decision BackSpace Erase one character Tab Autocompletes from the cursor position lt Moves the cursor backward one character Moves the cursor forward one character i Recalls the prior command l Recalls the next command Ctrl B Moves the cursor backward one character equivalent to the key Ctrl F Moves the cursor forward one character equivalent to the key gt Ctrl A Moves the cursor to the line start Ctrl E Moves the cursor to the line end Ctrl G Move the cursor to the top of the word before one Because there are space and hyphen and directory separator or the word is discerned Ctrl P Recalls the prior command equivalent to the key 1 Ctrl N Recalls the next command equivalent to the key C
38. r authority is Operator Change Environment Setting of the user level must be enabled 4 3 4 Update packages information 4 3 4 1 Update packages informatioin Information about update packages is located at the following target repository uppkgs Examples show command enables you to view information about update packages gt show repository uppkgs ufip repository uppkgs ufit uppkgs Targets NEC ExpressUpdate Agent_Linux_3 00_20110310100740 NEC ExpressUpdate Agent_Windows_3 00_20110302171440 Properties EntryCount 2 Verbs cd exit help show delete 41 4 3 4 2 The update package information Information about the update package is located at the following target repository uppkgs lt uppkg name gt Property of this target is as follow There is no specified command for this target Table 4 32 Properties of repository uppkgs lt uppkg name gt Property Module Access read Description Displays the name of firmware or software Version read Displays the version of the update package Release read Displays the release date of the update package Target read Displays the operating system name that the update package supports Model read Displays the model name of the component that the update package supports EstimatedTime read Displays the estimate of the time to install the update package InstallEstimatedTime read Displa
39. representative NEC ExpressUpdate status of all of the components Refer to Table 4 2 to get information about NEC ExpressUpdate status Group read Displays a name of a group which the component belongs to IpAddress read Displays an IP address of the component BmclIpAddress read Displays a BMC s IP address of the component Model read Displays a model name of the component SerialNumber read Displays a serial number of the component Guid read Displays a GUID of the component OsVersion read Displays an OS information of the component Example show command shows information of the component More concrete examples are as follows gt show cmps Server01 ufip cmps Server01 ufit Server01 Targets system map Properties Name Server01 Status NORMAL ExpUpStatus LATEST_CONDITION Group group01 IpAddress 192 168 14 18 BmcIpAddress 192 168 14 19 Model Express5800 531Ma N8000 2001 SerialNumber 1234567 Guid AAAAAAAA 0000 BBBB 1111 CCCCCCCCCCCC OsVersion Microsoft Windows Vista Business Service Pack 2 Verbs cd exit help show 19 Chapter3 Group management 3 1 Group information 3 1 1 Showing a list of groupset show command at the following target shows a list of groupset e grps Property of this target is as follow There is no specified command for this target Table 3 1 Properties of grps Property Access Description EntryCount read A number of registered gro
40. s examples so setting values such as IP addresses on screen images are not guaranteed for operation E About Symbols in This Document The following explains three symbols that are used in this document IMPORTANT Points that are mandatory or require attention when using the software or the component CHECK Points that are require confirmation when using the software or the component TIP Helpful and convenient piece of information About Font in This Document The talic font shows the option of command in this document E For other information about the NEC ESMPRO Manager See the documents below NEC ESMPRO Manager Ver 5 Installation Guide NEC ESMPRO Manager Ver 5 Setup Guide NEC ESMPRO Manager Ver 5 Command Line Interface Chapter1 About Command Line Interface 1 1 Overview This document provides information about a Command Line Interface to NEC ExpressUpdate This interface is executed by esmcli command IMPORTANT e esmcli command does not have a function to registering a component to NEC ESMPRO Manager In case of registering a component please use NEC ESMPRO Manager s Web interface e Incase of CLI following characters are not available in group name MV lt gt amp 4M Using NEC ExpressUpdate Updates via NEC ExpressUpdate Agent or Updates via Management controller of the component must be enabled 1 2 System Requirements esmcli command can be executed only on a management PC which
41. t You can shorten a command by changing current target When you omit lt target gt the cd command will display current target exit Syntax exit lt options gt Description The exit command terminates and logs out the user session show Syntax show lt options gt lt target gt Description The show command is used to display information about lt target gt When you omit lt target gt the show command will display information about current target create Syntax create lt options gt lt target gt Description The create command is used to create new target objects 11 delete Syntax delete lt options gt lt target gt Description The delete command is used to remove a target When you omit lt target gt the delete command will delete current target load Syntax load lt options gt lt target gt Description The load command is used to take a binary image from a specific source location and place it at the specified target address reset Syntax reset lt options gt lt target gt Description The reset command resets the target s state set Syntax set lt options gt lt target gt lt propertyname gt lt value gt Description The set command is used to set the value of one or more of a target s properties start Syntax start lt options gt lt target gt Description The start command starts the target stop Syntax stop lt options gt lt target gt Description
42. t and you can confirm this command s progress from ExpUpStatus property Run the show command to the each module element and you can confirm this command s result from LatestApplyResult property cmps Server01 map expup mods NEC ExpressUpdate Agent 31 4 2 1 3 For the specified group load command at the below target enables you to update all modules of components belonging to the specified group lt Group Name gt Refer to the section 4 1 3 1 for more information about this target grps grpset lt Group Name gt expup Specific option of this command is as follow Table 4 14 Specific options of grps grpset lt Group Name gt expup Option Description exclude Specifies components or groups that are not included in this operation reboot Enables NEC ExpressUpdate to reboot the system if the update requires it CHECK In the case of the user authority is Operator Install Update Packages of the user level must be enabled Example load grps grpset lt Group Name gt expup command enables you to update all modules of components belonging to the specified group lt Group Name gt gt load exclude cmp Server02 grps grpset root expup COMMAND COMPLETED Updating was started Run the show command to the each module element and you can confirm this command s progress from ExpUpStatus property Run the show command to the each module element and you can confirm this command s result from La
43. ter2 Component management 2 1 Component information 2 1 1 Showing a list of components show command at following target shows a list of all managed components cmps Properties of this target are as follow There is no specified command for this target Table 2 1 Properties of cmps Property Access Description EntryCount read Displays a number of registered components Status read Displays a representative status of all of the components ExpUpStatus read Displays a representative NEC ExpressUpdate status of all of the components Refer to Table 4 2 NEC ExpressUpdate statuses to get information about NEC ExpressUpdate status Example show command shows a list of managed components More concrete examples are as follows gt show ufip cmps ufit cmps Targets Server01 Server02 Properties EntryCount 2 Status NORMAL ExpUpStatus LATEST_CONDITION Verbs cd exit help show 18 2 1 2 Showing component information show command at following target shows information of managed component cmps lt Component Name gt Properties of this target are as follow There is no specified command for this target Table 2 2 Properties of cmps lt Component Name gt Property Access Description Name read Displays a name of the component Status read Displays a representative status of all of the components ExpUpStatus read Displays a
44. testApplyResult property 4 2 1 4 For the specified group and module load command at below targets enables you to update the specified module lt Module Name gt of components belonging to the specified group lt Group Name gt Refer to the section 4 1 1 2 for more information about this target grps grpset lt Group Name gt expup mods lt Module Name gt Specific option of this command is as follow Table 4 15 Specific options of grps grpset lt Group Name gt expup mods lt Module Name gt Option Description exclude Specifies components or groups that are not included in this operation reboot Enables NEC ExpressUpdate to reboot the system if the update requires it CHECK e In the case of the user authority is Operator Install Update Packages of the user level must be enabled A EST AAA A A T A EEE seseey Example load grps grpset lt Group Name gt expup mods lt Module Name gt command enables you to update the specified module lt Module Name gt of components belonging to the specified group lt Group Name gt gt load exclude cmp Server02 grps grpset root expup mods NEC ExpressUpdate Agent COMMAND COMPLETED Updating was started Run the show command to the each module element and you can confirm this command s progress from ExpUpStatus property Run the show command to the each module element and you can confirm this command s result from LatestApplyResult property cmps Ser
45. trl 1 Autocompletes from the cursor position equivalent to the key Tab Ctrl V Paste Supported only in Windows OS Ctrl J Decision equivalent to the key Enter Ctrl M Decision equivalent to the key Enter Ctrl H Erase one character equivalent to the key BackSpace Ctrl L Clear the screen Supported only in Linux OS Ctrl K Delete the line after the cursor position Ctrl U Delete the line before the cursor position Ctrl W Delete all the letters from the cursor to the directory separator before one Ctrl D When there is an input delete one character of the position of the cursor When there is not an input finish the shell mode Ctrl C Finish the shell mode 1 4 2 One liner mode The one liner mode executes only specified CLI command without starting the shell function of esmcli To execute the one liner mode enter a CLI command following to a username and password from a command line as shown below And please input user name and password of NEC ESMPRO Manager Please refer to 1 5Basic commands for the CLI command to execute esmcli Option CLI Command esmcli Indicates the NEC ESMPRO Manager command line interface command Option Input an option There are following types of option h help Display the command syntax of the esmcli command When this option is appointed the shell mode does not start u user lt user name gt Input user name of NEC
46. upset Example show command shows a list of groupset More concrete examples are as follows gt show grps ufip grps ufit grps Targets grpset chassisset Properties EntryCount 2 Verbs cd exit help show 20 3 1 2 Showing information of groupset show command at the following target shows information of groupset grps lt GroupSet Name gt Properties of this target are as follow There is no specified command for this target Table 3 2 Properties of grps lt GroupSet Name gt Property Access Description Name read Displays a name of groupset RootGroup read Displays root group s name Example show command shows information of a groupset More concrete examples are as follows gt show grps grpset ufip grps ufit grps Targets root Properties Name grpset RootGroup root Verbs cd exit help show 21 3 1 3 Showing information of group show command at the following target shows information of a group grps lt GroupSet Name gt lt Group Name gt Properties of this target are as follow There is no specified command for this target Table 3 3 Properties of grps lt GroupSet Name gt lt Group Name gt Property Access Description Name read Displays a name of the group Status read Displays a status of the group ExpUpStatus read Displays an NEC ExpressUpdate status of the group GroupCount rea
47. ut the specified component cmps lt Component Name gt map expup Properties and specific commands of this target are as follows Table 4 1 Properties of cmps lt Component Name gt map expup Property Access Description ExpUpStatus read Displays NEC ExpressUpdate statuses Each status is listed in Table 4 2 NextUpdateDate read Displays time and date of the next update if the update is scheduled by the remote batch function RepositoryLocation read Displays a location of the repository local remote UpdatePkgLatestDownloaded read Displays the most recent time when the repository was updated If updating has never been executed it shows None NextDownloadDate read Displays time and date of the next repository update if it is scheduled Table 4 2 NEC ExpressUpdate statuses Status Description NOT_LATEST The repository has update packages newer than current version UNDER_INSTALLATION An updating is in progress UNDER_UNINSTALLING An uninstallation is in progress A progress ratio is also shown REBOOTING The update which requires rebooting the system is executed and rebooting is in progress It is not possible to update a module under this status REBOOT_REQUIRED This status shows that the system has not been rebooted yet although the update requires rebooting In this status the update has not been completed yet This status is cleared by rebooting the system
48. uthority is Operator Install Update Packages of the user level must be enabled e This command effects only waiting tasks A task which has been started is unable to be cancelled Example stop emps lt Component Name gt map expup command enables you to cancel updates of the specified component lt Component Name gt If this command is successful a list of cancelled tasks is shown gt stop cmps Server01 map expup COMMAND COMPLETED cmps Server01 map expup mods NEC ExpressUpdate Agent Cancel of update process was executed 4 2 4 2 For groups stop command at below targets enables you to cancel updates Refer to the section 4 1 1 2 for more information about this target grps grpset lt Group Name gt expup There is no specific option for this command In the case of the user authority is Operator Install Update Packages of the user level must be enabled Example stop grps grpset lt Group Name gt expup command enables you to cancel updates of components belonging to the specified group lt Group Name gt If this command is successful a list of cancelled tasks is shown gt stop grps grpset root expup COMMAND COMPLETED cmps Server01 map expup mods BMC Firmware cmps Server01 map expup mods NEC ExpressUpdate Agent cmps Server02 map expup mods NEC ExpressUpdate Agent Cancel of update process was executed 34 4 3 Repository and Update package management 4 3 1 Re
49. ve path can be specified Required option f force When there is a same name file in the destination directory the file is overwritten Examples show commands enable you to view NEC ExpressUpdate Agent log gt show cmps Server01 map agtlogs expupagtlog ufip cmps Server0 1 map agtlogs expupagtlog ufit expupagtlog Targets Properties Verbs cd exit help show dump Examples dump commands enable you to save NEC ExpressUpdate Agent log to the specified directory Add destination option and specify the directory path to save file gt dump destination CNtemp cmps Server01 map agtlogs expupagtlog COMMAND COMPLETED C temp eualog1 zip If you want to save NEC ExpressUpdate Agent log file any name specify the zip file name to the path and execute commands dump destination CNempreualog zip cmps Server01 map agtlogs expupagtlog When you add force option the zip file is overwritten dump destination CWempreualog zip force cmps Server0 1 map agtlogs expupagtlog 47 Chapter6 Troubleshooting This section describes the error message and the coping method for it 6 1 Error message Table 6 1 Error messages Error Message What to do User name or password is not correct Please confirm the user name and the password and please input again Failed to connect to NEC ESMPRO Manager EH Windows OS Please confirm that the NEC ESMPRO Manager service
50. ver01 map expup mods NEC ExpressUpdate Agent 32 4 2 2 Install commands load command at below target enables you to install a module Refer to the section 4 1 3 1 for more information about this target cmps lt Component Name gt map expup mods lt Module Name gt Specific option of this command is as follow Table 4 16 Specific options of cmps lt Component Name gt map expup mods lt Module Name gt Optio De 0 source Specifies the update package reboot Enables NEC ExpressUpdate to reboot the system if the installation requires it In the case of the user authority is Operator Install Update Packages of the user level must be enabled Example load cmps lt Component Name gt map expup mods lt Module Name gt command enables you to install an module lt Module Name gt to the specified component lt Component Name gt gt load source 4 4 1 emps Server0 1 map expup mods ESMPRO ServerA gent Ver 4 4 COMMAND COMPLETED Updating was started Run the show command to the each module element and you can confirm this command s progress from ExpUpStatus property Run the show command to the each module element and you can confirm this command s result from LatestApplyResult property e UFiT of the update package that is referred by source option is shown in the result of show cmps lt Component Name gt map expup mods lt Module Name gt uppkgs command 4 2 3 Uninstall
51. ys the estimate of the time to install when the module supports installation UninstallEstimatedTime read Displays the estimate of the time to uninstall when the module supports uninstallation Reboot read Displays whether that the selected update package requires a reboot after the installation e NECESSITY e UNNECESSITY Severity read Displays the severity of the update package e LOW e MEDIUM e HIGH ExpressUpdateS upported read Displays whether the update package supports automatic updating by NEC ExpressUpdate e SUPPORTED e UNSUPPORTED DowngradeSupported read Displays whether the update package supports downgrade e SUPPORTED e UNSUPPORTED MultipleModelSupported read Displays whether the update package supports multiple mode of component e SUPPORTED e UNSUPPORTED OtherUsed read Displays whether the update package is in use by other NEC ESMPRO Manager e UNOCCUPIED e DURING _USE 42 Examples show command enables you to view information about the update package gt show repository uppkgs NEC ExpressUpdate Agent_Windows_3 00_20110302171440 ufip repository uppkgs NEC ExpressUpdate Agent_Windows_3 00_20110302171440 ufit NEC ExpressUpdate Agent_Windows_3 00_20110302171440 Targets readme Properties Module NEC ExpressUpdate Agent Version 3 00 Release 4 1 2011 12 00 00 Target Windows Server 2003 Enterprise E

NEC Express5800/R120d-2E SR User's Guide

Contents

Download Pdf Manuals

Related Search

Related Contents