Multiplex Technology 1112 User's Manual
Contents
1. This warranty gives you specific legal rights and you may have other rights which vary from state to state Note This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Parts 15 and 18 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment to an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Caution Any changes or modifications not expressly approved by the manufacturer of this device could void the user s authority to operate the equipment This device complies with part 15 of the FCC rules Operation is subject to the following two conditions 1 This device may not2. Bandwidth from dish to receiver 950 MHz to 1 45 GHz Voltage range from receiver to dish 10 5 VDC to 21 0 VDC LNB current range 50 mA to 200 mA Operating temperature range 40 F to 122 F Dual pane window thickness range 0 50 to 0 75 inch For single pane glass use Model 1111 ASA To prevent electrical shock do not attempt to High current LNBs may require use of service unit No user serviceable parts inside model 1100 GlassLink Power Booster Warranty Multiplex Technology Inc warrants this product to be free from defects in materials and workmanship for a period of one year from the date of purchase or MTI will repair or at its option replace the defective product To obtain warranty service call MTI for a Return Material Authorization RMA number and return the product pre paid accompanied by a copy of the purchase receipt Attn Customer Service Please put the RMA number on the outside of the carton Any implied warranty arising from the sale of the product including implied warranties of merchantability and fitness for purpose are limited to the warranty stated above MTI shall not be responsible for any loss damages or expenses whether direct consequential or incidental arising from the use or inability to use this product Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation or incidental or consequential damages so the above limitations may not apply to you
3. cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation multiplex technology inc Post it is a trademark of 3M GlassLink is a trademark of Multiplex Technology Inc This product is covered by the following patents US patent number 5612652 ROC patent number 086813 600 503 B TM Glass dish to receiver connection Model 1112 For Dual Pane Glass for single pane use model 1111 U S and international patents pending multiplex technology inc GlassLink Installation Part ONE installation of OUTSIDE GlassLink 1 Using the instructions included with your satellite system install the dish and locate the satellite receiver in the house Identify a convenient window through which the signals from the dish can be routed to the receiver Usually the GlassLink will be located in a lower corner out of sight but it can be located anywhere in any orientation on the glass Make sure the window uses dual pane thermal glass 72 to thick Contact factory for pane thickness outside this range Clean the glass thoroughly with glass cleaner Remove any stickers paint decals heat reflecting films etc from the surface of the glass both inside and out The glass must be perfectly clean and dry If the glass feels cold to the touch less than 60 F use a blow dryer to warm the glas
4. roperly secured and does not pull on the INSIDE GlassLink Power up your satellite receiver LED indicators should be visible on the INSIDE GlassLink As you change channels on the satellite receiver you may notice that the LED indicators change color If the LEDs blink or there are situations when both LEDs are simultaneously lit this may indicate the need for the GlassLink Power Booster Call our technical support line at 1 800 999 5225 for additional instructions OUTSIDE GlassLink INSIDE INSIDE GlassLink receiver
5. s evaporating any moisture that might be present Install the OUTSIDE GlassLink first Remove the protective papers from the face of the OUTSIDE GlassLink and press it firmly against the glass Push on all of the edges to make sure it is seated uniformly all around Connect the cable from the dish to the OUTSIDE GlassLink Make sure the cable is properly secured and does not pull on the OUTSIDE GlassLink From the inside inspect the outside seal Make sure that it is firm has no air bubbles gaps or wrinkles If there are go back outside and press until a good even seal has been achieved OUTSIDE OUTSIDE GlassLink coax cable from the dish GlassLink Installation Part TWO installation of INSIDE GlassLink 1 It is important that the INSIDE GlassLink be carefully aligned to the OUTSIDE GlassLink From the inside to eliminate a parallax view look directly through the glass at the OUTSIDE GlassLink Place the INSIDE GlassLink on the glass such that a The notch of the INSIDE GlassLink corresponds to the notch of the OUTSIDE GlassLink b The outline of the INSIDE GlassLink is aligned with the outline of the OUTSIDE GlassLink Once confident that you can repeat this location remove the protective paper and firmly press the unit into this position Now attach the cable from the satellite receiver to the INSIDE GlassLink Make sure the cable is p
Download Pdf Manuals
Related Search