Motorola Cls1110 User's Manual
Contents
1. indicated by RRNA The Interference Eliminator Code displays briefly indicated by fe a 22 then the current channel remains displayed Adjusting the Volume Turn clockwise to increase the volume and counterclockwise to decrease the volume Note Do not hold the radio too close to your ear when adjusting the volume Reading the Display Signal Strength and Channel Busy Indicator VibraCall Alert Indicator Frequency and Interference Eliminator Code Battery Meter Channel Interference Eliminator Code Indicator Keypad Lock Frequency Indicator Programming Mode Microphone Gain and VOX CLS1410 only scan CLS1410 Only xo T ae rar p O c Q O 2 Q x O Talking and Receiving Basic Radio Operation 1 Press and hold won to check for channel activity If you hear static the channel is clear to use Do not transmit if someone is speaking on the channel Press to again to stop monitoring 2 To talk press and hold Push to Talk and speak into the microphone Hold the radio 2 to 3 inches away from your mouth 3 To listen release Push to Talk The transmit LED on the top of the radio is red when transmitting Signal Strength and Channel Busy Indicators When there is activity on a frequency the radio displays Yui and the transmit light blinks at a faster rate of once per second When there is activity on the2. Aids some digital wireless radios may interfere with some hearing aids In the event of such interference you may want to consult your hearing aid manufacturer to discuss alternatives Other Medical Devices If you use any other personal medical device consult the manufacturer of your device to determine if it is adequately shielded from RF energy Your physician may be able to assist you in obtaining this information Safety and General Use While Driving Check the laws and regulations on the use of radios in the area where you drive Always obey them When using your radio while driving please Give full attention to driving and to the road Use hands free operation if available Pull off the road and park before making or answering a call if driving conditions so require Operational Warnings For Vehicles with an Air Bag Do not place a portable radio in the area over an air bag or in the air bag deployment area Air bags inflate with great force If a portable radio is placed in the air bag deployment area and the air bag inflates the radio may be propelled with great force and cause serious injury to occupants of the vehicle Potentially Explosive Atmospheres c O Par T O am O O Le an PA ae a Turn off your radio prior to entering any area with a potentially explosive atmosphere unless it is a radio type especially qualified for use in such areas as Intrinsically Saf
3. Pagers 1 800 548 9954 Two Way Radios 1 800 448 6686 PA a c ae as Canada JAI Products 1 800 461 4575 TTY 1 888 390 6456 For Accessories and Software please call the telephone number designated above for the product with which they are used You will receive instructions on how to ship the Products to Motorola You must ship the Products to us with freight duties and insurance prepaid Along with the Products you must include a a copy of your receipt bill of sale or other comparable proof of purchase b a written description of the problem c the name of your service provider if this Product requires subscription service d the name and location of the installation facility if applicable and most importantly e your address and telephone number If requested you must also return all detachable parts such as antennas batteries and chargers RETAIN YOUR ORIGINAL PROOF OF PURCHASE We will ship repaired or replacement Products at our expense for the freight and insurance but at your expense for any duties If additional information is needed please contact us at the telephone number listed above VI What This Warranty Does Not Cover Products that are operated in combination with ancillary or peripheral equipment or software not furnished by Motorola for use with the Products ancillary equipment or any damage to the Products or ancillary equipment as a result of such use Among other thing
4. clone another radio repeat steps 3 and 4 To exit programming mode on the source radio press and hold Push to Talk until AL no longer appears U D _ Q N D a 4 D c O 02 Advanced Features You can set the following features by pressing and holding additional buttons while turning the radio on Press This Button To Do This While Turning DU the Radio On g Turn Keypad Tones On Off On Turns keypad beeps off for silent keypad operation p Q D _ Q LL O S C ae gt Le lt x Turn End of Transmission Tone On Off If enabled your two way radio transmits a tone when you finish transmitting like saying Roger or Over Off lf keypad tones are off and end of transmission tone is on you will not hear the end of transmission tone but it is transmitted Press This Button To Do This While Turning gefauit the Radio On g Turn Battery Save Mode On Off Decreases attack time which is the brief period of time between when the radio receives a transmission on its frequency and broadcasts audio Talk fon Turning battery save mode off decreases battery life by approximately 20 Restore Factory Defaults Pucio Tak Returns radio to its original factory settings ee ee Co 72 Soe Q LL Le S C fan gt Le lt x O O O lt V 2 gt O Len Troubleshooting Symptom Try This N
5. same frequency and code as your radio your radio is receiving the radio displays Yi and a signal strength from 1 weakest to 6 strongest This can help determine when a radio is moving out of range DB Tal Note Obstacles that block the signal path may affect the strength of the incoming signal Talk Range Industrial Multi Level Inside steel concrete Inside multi level industrial buildings buildings Up to 200 000 sq ft Up to 15 floors Handsfree Use VOX CLS1410 only The CLS1410 model radio can operate handsfree when used with compatible voice activation VOX accessories A short delay occurs between the time when you start talking and when the radio transmits With Compatible VOX Accessories Turn the radio off Open the accessory cover Plug the audio accessory firmly into the accessory jack Turn the radio on The radio displays amp If is blinking and you are setting up the VOX accessory for the first time set the VOX sensitivity level see page 22 5 Lower the radio volume BEFORE placing the accessory in or near your ear oS T O 2 Q x O x H D 2 D O D X D D 6 To transmit speak into the accessory microphone To receive stop talking To disable VOX operation press Push to Talk or remove the audio accessory Note To order accessories visit www motorola com radios profes
6. 8 for information on frequencies for communicating with other business radios If you are matching your Series radio to an existing Spirit GT radio see page 44 O pe O O Lu O e Lu Oo Programming the Interference Eliminator Code The interference eliminator code helps minimize interference by providing code combinations that filter out static noise and unwanted messages 1 In programming mode press won until displays and the code number blinks 2 Press or to select the code see page 41 3 Press and hold Push to Talk to exit programming mode or press to continue programming Programming the Available Channels CLS1410 only If you need fewer channels you can reduce the number of available channels 1 In programming mode press won until rH displays and the channel number blinks 2 Press or to select the number of channels you want available 3 Press and hold Push to Talk to exit programming mode or press to continue programming Note The radio retains settings for channels made unavailable Le O O Lu O e Lu a le Programming Call Tones and VibraCalf CLS1410 only Your radio can transmit call tones to other radios in your group so you can alert them that you are about to talk Your radio is programmed at the factory with call tones turned off set to J but you can change this setting to choose a distinctive
7. L 60196 1078 U S A MOTOROLA and the Stylized M Logo are registered in the US Patent amp Trademark Office All other product or service names are the property of their respective owners 2003 2010 by Motorola Inc All rights reserved Printed in Malaysia ge W MAKAA A 6864110W15 C
8. Programming The Series platform is designed to replace the Spirit GT Series radio The first eight frequencies and 38 interference eliminator codes of Series are compatible with Spirit GT Series To program your Series radio to talk with a Spirit GT Series verify or change your Spirit GT settings as follows To verify the frequency and code 1 Press the Menu button 3 times The channel number and frequency display 2 Press Menu again The interference eliminator code displays To change the frequency 1 Enter programming mode by pressing and holding Push to Talk for approximately 5 seconds while turning the radio on then release Push to Talk 2 Use the Scroll button to select one the eight frequencies To change the interference eliminator code 1 Enter programming mode by pressing and holding Push to Talk for approximately 5 seconds while turning the radio on then release Push to Talk 2 Press the Menu button The code number blinks 3 Use the Scroll button to select the code To exit programming mode on a Spirit GT Series radio press Push to Talk or the radio will exit programming mode after five seconds Warranty Limited Warranty for Motorola Personal Communications Products Purchased in the United States and Canada What This Warranty Covers Products Defects in materials and workmanship in wireless cellular telephones pagers and or two way radios and certain accessories that are sold with them such as the
9. User s Guide AA MOTOROLA P SERIES TWO WAY RADIO AAYA Models CLS1110 and CLS1410 6864110W15 C Introduction csv 1 FCC Licensing Information 3 Safety and General Information 5 Radio Controls 12 Getting Started 13 Installing the Swivel Belt Holster 13 Installing the Batteries 14 Charging the Battery 15 Turning Your Radio On and Off 18 Adjusting the Volume 19 Reading the Display 19 Talking and Receiving 100 20 Basic Radio Operation 20 Signal Strength and Channel Busy Indicators nn nn 20 Talk Range una 21 Handsfree Use VOX CLS1410 only 21 Locking the Keypad 22 Monitoring a Channel 23 Scanning CLS1410 Only 23 Contents Programming Mode 25 Factory Default Settings 26 Entering Programming Mode 27 Cloning Radio Settings 31 Advanced Features 32 Troubleshooting 34 Use and Care sisi desire 37 Frequencies and Bandwidths 38 Spirit GT Series Programming 44 NV AT FAN CV nanas shrenee 45 Introduction Thank you for purchasing a Motorola series Radio Your radio is a product of Motorola s 70 plus yea
10. ack on the MUC Plug the cord into an AC outlet Turn the radio off Insert the radio or battery into the charging pocket ORWN Charging Status LEDs On the drop in charger the radio and battery charging pockets have their own LEDs On the MUC each of the 6 charging pockets has an LED The LEDs are grouped into pairs to show which charging pockets are paired for cloning see page 31 The LED is solid red when the battery is charging and solid green when charging is complete Battery Meter The battery meter in the upper left corner of the display see page 19 shows how much battery power is remaining Battery Type 3 Bars 2 Bars 1 Bar Blinking Li lon 100 85 85 25 25 10 Final 10 Le Cc N O c prar p n O Battery Life Based on 5 transmit 5 receive 90 standby standard duty cycle Li lon 14 Hours Le Cc Fe N O cC prer ar O Turning Your Radio On and Off See page 12 for a basic radio diagram Turn clockwise to turn the radio on and counterclockwise to turn the radio off When the radio is on the transmit light on the top of the radio blinks every 3 seconds When you turn the radio on the radio chirps and the display briefly i am Tall h shows all features and display segments WOH The radio then displays the current channel larger number in the center and the frequency assigned to that channel on the right l
11. battery battery charger and holster manufactured and or sold by Motorola Products e Batteries Defects in materials and workmanship in batteries that are manufactured by Motorola and or sold with Products are covered by this warranty only if the fully charged capacity falls below 80 of rated capacity or they leak e Software Physical defects in the media that tangibly embodies each copy of any software supplied with the Products Il What the Period of Coverage Is From the date the Products are purchased by the first end user Products The warranty is for one year Exception The warranty for Spirit GT Series and Talkabout Series two way radio accessories including the Spirit GT Series batteries is for 90 days Software The warranty is for 90 days D he c ao as e Repairs Replacements The warranty is for the balance of the original warranty or for 90 days from the date you receive it whichever is longer Ill Who is Covered This warranty extends to the first end user purchaser only IV What We Will Do to Correct Warranty Problems At no charge to you we have the option to repair or replace the Products or software that do not conform to the warranty or to refund the Products purchase price We may use functionally equivalent reconditioned refurbished pre owned or new Products or parts No software updates are provided V How to Obtain Warranty Service or Other Information Phones 1 800 331 6456
12. call tone The VibraCall feature is an additional call tone option that makes the CLS1410 radio vibrate briefly when it receives if you have not transmitted or received in the last 30 seconds Select call tone 4 to turn VibraCall on WY displays on the radio when VibraCall is on 1 In programming mode press tm until displays 2 Press or to hear and select the call tone Select call tone 4 for VibraCall CLS1410 only 3 Press and hold Push to Talk to exit programming mode or press wn to continue programming To transmit your call tone press on the side of the radio O pe O O Lu O e Lu ai Le O O Lu O e Lu a le Programming Microphone Gain You can adjust the microphone sensitivity to suit different users or operating environments 1 In programming mode press won until ee and L display 2 Press or to select the sensitivity level J High sensitivity for quiet environments 2 Medium sensitivity default Low sensitivity for loud environments 3 Press and hold Push to Talk to exit programming mode or press won to continue programming Editing the Scan List CLS1410 Only For faster scanning and to avoid hearing unwanted transmissions you can edit the scan list to skip channels 1 In programming mode press won until Z displays and the channel number and Y or m blink 2 Press or to selec
13. d parties that the operation of the software products will be uninterrupted or error free or that all defects in the software products will be corrected In no event shall Motorola be liable whether in contract or tort including negligence for damages in excess of the purchase price of the Product or for any indirect incidental special or consequential damages of any kind or loss of revenue or profits loss of business loss of information or data or other financial loss arising out of or in connection with the ability or inability to use the Products to the full extent these damages may be disclaimed by law D he c ao as D het c ae ae Vill Patent and Software Provisions At Motorola s expense we will defend you and pay costs and damages that may be finally awarded against you to the extent that a lawsuit is based on a claim that the Products directly infringe a United States patent Our obligation is conditioned on a you notifying us promptly in writing when you receive notice of the claim b you giving us sole control of the defense of the suit and all negotiations for its settlement or compromise and c should the Products become or in Motorola s opinion be likely to become the subject of a claim of infringement of a United States patent you permit us at our option and expense either to procure for you the right to continue using the Products replace or modify them so that they become
14. e Do not remove install or charge batteries in such areas Sparks in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury or even death en O prar Lu o Aut Sms Q Q O Le en gt a Note The areas with potentially explosive atmospheres referred to above include fueling areas such as below decks on boats fuel or chemical transfer or storage facilities areas where the air contains chemicals or particles such as grain dust or metal powders and any other area where you would normally be advised to turn off your vehicle engine Areas with potentially explosive atmospheres are often but not always posted Blasting Caps and Areas To avoid possible interference with blasting operations turn off your radio when you are near electrical blasting caps in a blasting area or in areas posted Turn off two way radio Obey all signs and instructions Operational Cautions Antennas Do not use any portable radio that has a damaged antenna If a damaged antenna comes into contact with your skin a minor burn can result Batteries All batteries can cause property damage and or bodily injury such as burns if a conductive material such as jewelry keys or beaded chains touch exposed terminals The conductive material may complete an electrical circuit short circuit and become quite hot Exercise care in handling any charged battery particularly w
15. ess Push to Talk within 5 seconds If no transmission occurs within 5 seconds scanning resumes 3 To stop scanning briefly press oy If you press Push to Talk while the radio is scanning the radio transmits on the channel you were on before you started scanning aap Tal U D 2 D O D X D ey j Skipping and Removing Channels While Scanning scan has two temporary features to make it easier to use e Scan advance If the radio stops scanning on a channel you do not want to listen to press to resume scanning for the next active channel e Nuisance delete Press and hold to temporarily remove a channel from the scan list The channel return the next time you use the scan feature O 2 Q x pe c O Programming Mode Programming mode allows you to change the following settings on your radio e Channel e Configure the operating frequency from a pre programmed frequency list e Interference eliminator code e Call tones e Microphone gain e Scan list CLS1410 only e Available channels CLS1410 only Note e To talk with someone on your two way radio the channel CLS1410 only frequency and interference eliminator code must be the same on both radios e You cannot enter programming mode while a VOX accessory is plugged into the radio O Le O O ae O e Lu A Factory Default Settings You
16. hen placing it inside a pocket purse or other container with metal objects Battery Charger Safety Instructions Save these Instructions 1 2 3 Do not expose the charger to rain or snow Do not operate or disassemble the charger if it has received a sharp blow or has been dropped or damaged in any way Never alter the AC cord or plug provided with the unit If the plug will not fit the outlet have the proper outlet installed by a qualified electrician An improper condition can result in a risk of electric shock To reduce the risk of PEE to the cord or plug pull the plug rather than the cord when disconnecting the charger from the AC receptacle To ae the risk of electric shock unplug the charger from the outlet before attempting any maintenance or cleaning Use of an attachment not recommended or sold by Motorola may result in a risk of fire electric shock or personal injury Make sure the cord is located so it will not be stepped on tripped over or subjected to damage or stress An extension cord should not be used unless absolutely necessary Use of an improper extension cord could result in a risk of fire and or electric shock If an extension cord must be used make sure that li pins on the plug of the extension cord are the same number size and shape as those on the plug of the charger The extension cord is properly wired and in good electrical condition The cord size is 18 AWG for lengths up to 100 fee
17. holding for 3 seconds Recharge or replace batteries Extreme operating temperatures affect battery life Reinsert radio and or battery Charger light Clean battery and or charger contacts does notcome Verify that the charging pin on the transformer is inserted on correctly into the drop in charger Low batteries O O e lt U 2 O Sn m O O O lt Vv 2 gt O Lu Symptom Try This Low battery meter reading although new batteries are installed Verify radio is set to the correct battery type see page 14 Cannot activaic Feature not set and on see page 21 VOX CLS1410 Sensitivity set to 9 see page 22 only Verify that accessory allows VOX operation Cannot enter ee Mode Unplug audio accessories and retry Use and Care Use a soft damp cloth Do not immerse Do not use alcohol or to clean the exterior in water cleaning solutions If the radio is submerged in water Q Lu O T C Y N D Do not use radio until Turn radio off and Dry with soft cloth completely dry remove batteries Frequencies and Bandwidths These charts provide frequency information and are useful when using Motorola Series radios with other business radios Frequency Display Number is identical to Spirit M GT and S Series frequency position where applicable but bandwidth may be different UHF Frequencies Dis
18. ical damage to the surface of the Products including scratches cracks or other damage to a display screen lens or other externally exposed parts Failure of Products that is due primarily to any communication service or signal you may subscribe to or use with the Products e Coil cords that are stretched or that have any broken modular tabs Products that are leased D vhs c ae a Flat rate repair rates may apply to Products not covered by this warranty To obtain information about Products needing repairs that are not covered by this warranty please call the telephone number previously listed We will provide information on repair availability rates methods of payment where to send the Products etc Vil Some Other Limitations This is Motorola s complete warranty for the Products and states your exclusive remedies This warranty is given in lieu of all other express warranties Implied warranties including without limitation the implied warranties of merchantability and fitness for a particular purpose are given only if specifically required by applicable law Otherwise they are specifically excluded No warranty is made as to coverage availability or grade of service provided by the Products whether through a service provider or otherwise No warranty is made that the software will meet your requirements or will work in combination with any hardware or applications software products provided by thir
19. lide and snap the battery door into place D g V O 5 ng Q O Charging the Battery Use only the charger supplied with the radio or other Series power accessories For optimum battery life do not charge the battery for prolonged periods after it is fully charged Charging the battery over the weekend is acceptable Using the Drop in Charger 1 Place the charger on a flat surface 2 Insert the plug of the power cord into the jack on the charger 3 Plug the cord into an AC outlet 4 Turn the radio off If the radio is on while charging it will take longer to fully charge 5 Insert the radio with battery installed into the front charging pocket Note The radio will fit in the charger with the holster on Le Q T N O c prar i Q O The drop in charger will also sequentially charge a spare SNN5571 Li lon battery The spare battery will not begin to charge until the radio battery is fully charged Both batteries will charge in approximately 2 to 6 hours Le Q j Fa an O cC par m a O Using the 56531 Multi Unit Charger The Multi Unit Charger MUC allows drop in charging of up to 6 radios or batteries Batteries can be charged inside the radios or removed and placed in the MUC separately Each of the 6 charging pockets can hold a radio or battery but not both Place the charger on a flat surface Insert the power cord plug into the j
20. nd international standards and guidelines regarding exposure of human beings to radio frequency electromagnetic energy United States Federal Communications Commission Code of Federal Regulations 47 CFR part 2 subpart J c O Par T O am O Oo Le an PA ae O ur an T O Pa Q O xe em an gt st ae a American National Standards Institute ANSI Institute of Electrical and Electronic Engineers IEEE C95 1 1992 Institute of Electrical and Electronic Engineers IEEE C95 1 1999 Edition International Commission on Non lonizing Radiation Protection ICNIRP 1998 Ministry of Health Canada Safety Code 6 Limits of Human Exposure to Radio Frequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz 1999 e Australian Communications Authority Radiocommunications Electromagnetic Radiation Human Exposure standard 2003 e ANATEL ANNEX to Resolution No 303 of July 2 2002 Regulation of limitation of exposure to electrical magnetic and electromagnetic fields in the radio frequency range between 9 KHz and 300 GHz and Attachment to resolution 303 from July 2 2002 To assure optimal radio performance and make sure human exposure to radio frequency electromagnetic energy is within the guidelines set forth in the above standards always adhere to the following procedures Portable Radio Operation and EME Expos
21. non infringing or grant you a credit for such Products as depreciated and accept their return The depreciation will be an equal amount per year over the lifetime of the Products as established by Motorola Motorola will have no liability to you with respect to any claim of patent infringement that is based upon the combination of the Products or parts furnished under this limited warranty with ancillary equipment as defined in VI above This is Motorola s entire liability with respect to infringement of patents by the Products Laws in the United States and other countries preserve for Motorola and other third party software providers certain exclusive rights for copyrighted software such as the exclusive rights to reproduce in copies and distribute copies of such software The software may be copied into used in and redistributed with only those Products that are associated with such software No other use including without limitation disassembly or reverse engineering of such software or exercise of exclusive rights in such software is permitted Some states and other jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitation on the length of an implied warranty so the above limitations or exclusions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from jurisdiction to jurisdiction D he c ao as Se
22. o Power Recharge or replace Li lon battery Make sure Push to Talk is completely pressed while transmitting Recharge replace and or reposition batteries Verify the transmit light is illuminated while speaking Verify Channel Frequency and Code settings are correct Message not transmitted Hearing other noises or Frequency may be in use Change on all radios if possible see conversation on page 27 and 28 a channel Bandwidth does not match For optimal audio quality when communicating with Series radios the bandwidth of other radios should be set to 12 5 kHz if possible Poor audio quality Steel and or concrete structures heavy foliage buildings or vehicles decrease range see page 21 Check for clear line of Limited talk sight to improve range range 3 Wearing radio close to body such as in a pocket or on a belt decreases range Change location of radio Symptom Try This Confirm radios have the same channel frequency and interference eliminator code settings See page 25 Message not Recharge replace and or reposition batteries received Move to another location Obstructions and operating indoors or in vehicles may decrease range Verify radio is not in scan mode CLS1410 only see page 23 Radios are too close They must be at least 5 feet apart Heavy static or interference Radios are too far apart or obstacles are interfering with transmission Keypad locked Unlock by
23. ou are required to have a license issued by the FCC Application is made available on FCC Forms 601 schedules D and H and remittance form 159 If ordering the forms by mail phone or from the FCC website please request document number 000601 which includes all forms and instructions If using the FCC Fax on Demand system use the 7 digit order numbers listed below To obtain the required forms please use the following contact information Faxed Mailed By Phone or Web contact the Fax On Demand call the FCC forms hotline or for questions system at at regarding FCC license contact the FCC at 1 202 418 0177 1 800 418 FORM 1 888 CALL FCC 1 800 418 3676 1 888 225 5322 or http www fcc gov Request forms 3060001 Request document 000601 Request document 000601 3060003 and 3060006 Before filling out your application you must decide which frequency ies you can operate on See Frequencies and Bandwidthson page 38 For questions on determining your radio frequency please call Motorola Product Services at 1 800 448 6686 c O par G T O Gen is O 0 c O O LL Changes or modifications not expressly approved by Motorola may void the user s authority granted by the FCC to operate this radio and should not be made To comply with FCC requirements transmitter adjustments should be made only by or under the supervision of a person certified as technically qualified to perform transmitter maintenance and repai
24. play Frequency Display Frequency Number MHZ Bandwidth Number MHz Bandwidth EIRE og Le prer gt O C ae mM xe an og S G ex D LL UHF Frequencies Continued Display Frequency Display Frequency Number 4 Bandwidth Number Olar Bandwidth i lt j 2 gt aa D N O D o D LL UHF Frequencies Continued Display Frequency Display Frequency Number Ular Bandwidth Number Olar Bandwidth 72 lt prer gt Le c ae m Le a an p S G z ex Q Sen LL Interference Eliminator Codes Display Code Display Code Display Code Number Hz Number Hz Number Hz 72 lt prer gt Le en ae mM xe an p 2 O en ex LL Carrier Squelch 0 disables interference eliminator codes Digital Interference Eliminator Codes Display Digital Display Digital Display Digital Number Code Number Code Number Code Digital Interference Eliminator Codes Continued Display Digital Display Digital Display Digital Number Code Number Code Number Code 346 465 632 98 466 111 654 99 503 112 662 516 114 703 624 120 743 627 121 754 T l lt j gt m D N O D D D LL O an O e Q o p H O rar Q p Spirit GT Series
25. r radio is programmed at the factory to the following settings Frequency Channel CLS1110 CLS1410 Not available val anes Off 0 VibraCall Not available Off 0 Microphone i ae 2 d tivit Gain medium sensitivity To restore the factory settings turn the radio on while holding Push to Talk and wn for 3 seconds Le O O Lu O e Lu ou Entering Programming Mode Press and hold Push to Talk and won for 3 seconds while turning the radio on The radio beeps and displays Mitele the channel number blinks and the frequency indicated by RREA and code indicated by e s display alternately Note If you press and release the Push to Talk button when programming CSL1410 models you will return to the front of the Programming Mode Selecting a Channel CLS1410 Only 1 In programming mode press won until the channel number blinks and the frequency and code display alternately this is the first setting after you enter programming mode 2 Press or to select the channel 3 Press and hold Push to Talk to exit programming mode or press wm to continue programming Configuring the Operating Frequency from a Pre programmed Frequency List 1 In programming mode press ror until displays and the frequency number blinks 2 Press or to select the frequency 3 Press and hold Push to Talk to exit programming mode or press sa to continue programming Note See page 3
26. ries Programming Quick Reference To enter programming mode press and hold Push to Talk and won for 3 seconds while turning the radio on The radio beeps and displays Te the channel number blinks and the frequency indicated by fife and code indicated by e 1 display alternately Set the Channel Press or G Press D until ERA displays Set the Frequency Press or to change the frequency Set the Press D until 8 displays Interference Eliminator Press or to change the Code code Set Press a until CH displays Available Channels Press or to select number of available channels CLS1410 Only i Series Programming Quick Reference Set a Call Tone Set the Microphone Gain Press D until LA displays Press or to select 2 or for audible call tones U for VibraCall or for off default Press Fen until amp and L display Press or to select Low sensitivity g Medium sensitivity J High sensitivity Series Programming Quick Reference Press Fen until Z displays and the channel number and y4 or m blink Press or to select the channel then press on to select y4 include channel or m exclude channel Edit the Scan List SSeS ee ae ee ee eS Q MOTOROLA Motorola Inc 1301 E Algonquin Rd Schaumburg I
27. rs in the private land mobile and fixed services as certified by an organization representative of the user of those services Replacement of any transmitter component crystal semiconductor etc not authorized by the FCC equipment authorization for this radio could violate FCC rules Note Use of this radio outside the country where it was intended to be distributed is subject to government regulations and may be prohibited en e Her Lu fe Gen O c l O O LL Safety and General Information Important Information on Safe and Efficient Operation Read this Information Before Using Your Radio The information provided in this document supersedes the general safety information contained in user guides published prior to December 1 2002 Transmit and Receive Procedure Your two way radio contains a transmitter and a receiver To control your exposure and ensure compliance with the occupational controlled environment exposure limits always adhere to the following procedure Transmit no more than 50 of the time To transmit talk press the Push to Talk PTT button To receive calls release the PTT button Transmitting 50 of the time or less is important because the radio generates measurable RF energy exposure only when transmitting in terms of measuring standards compliance Exposure to Radio Frequency Energy Your Motorola radio is designed to comply with the following national a
28. rs of experience as a world leader in designing and manufacturing communications equipment The Series radios provide cost effective communications for businesses such as retail stores restaurants hotels and schools Motorola professional two way radios are the perfect communications solution for all of today s fast paced industries Please read this guide carefully so you know how to properly operate the radio before use Package Contents Series Radio e Swivel Belt Holster e Lithium lon Battery e Drop In Charger with Transformer e User s Guide Accessory Brochure Warranty Card O O Le O Se _ en e O Le O Bar s For product related questions please call 1 800 448 6686 in the USA 1 888 390 6456 TTY Text Telephone On the Web www motorola com radios professional ATTENTION Before using this product read the RF energy awareness information and operating instructions in the Safety and General Information section of this guide to ensure compliance with RF energy exposure limits MOTOROLA and the Stylized M Logo are registered in the US Patent amp Trademark Office All other product or service names are the property of their respective owners Motorola Inc 2003 2010 FCC Licensing Information Series professional two way radios operate on radio frequencies that are regulated by the Federal Communications Commission FCC In order to transmit on these frequencies y
29. s ancillary equipment includes batteries chargers adaptors and power supplies not manufactured or supplied by Motorola Any of these voids the warranty Someone other than Motorola or its authorized service centers tests adjusts installs maintains alters modifies or services the Products in any way Any of these voids the warranty gt od e Rechargeable batteries that a are charged by other than the Motorola approved battery charger specified for charging such batteries b have any broken seals or show evidence of tampering c are used in equipment other than the Product for which they are specified or d are charged and stored at temperatures greater than 60 degrees centigrade Any of these voids the warranty Products that have a serial numbers or date tags that have been removed altered or obliterated b board serial numbers that do not match each other or board serial numbers that do not match the housing or c nonconforming or non Motorola housings or parts Any of these voids the warranty Defects or damage that result from a use of the Products in a manner that is not normal or customary b improper operation or misuse c accident or neglect such as dropping the Products onto hard surfaces d contact with water rain extreme humidity or heavy perspiration e contact with sand dirt or the like or f contact with extreme heat or spills of food or liquid Phys
30. sional call 1 800 448 6686 or contact your point of purchase Setting the VOX Sensitivity You can adjust the sensitivity of your radio s accessory or microphone during VOX operation to suit different operating environments These menus appear only when the VOX feature is in use which is indicated by ie 1 Press a until displays The radio displays when you are setting the external VOX with audio accessory 2 Press or to select the sensitivity level D Off Low 2 Medium J High Locking the Keypad You can lock the keypad to avoid accidentally changing your radio settings 1 Press and hold a for 3 seconds 2 To unlock press and hold wo for 3 seconds Monitoring a Channel Monitoring allows you to check for activity on a channel 1 Press and hold wo If the channel is clear to use you will hear static and and O will display 2 Press x again to stop monitoring Scanning CLS1410 Only You can scan up to 4 channels and frequencies When the radio detects activity it stops scanning and locks in on the active channel This allows you to talk and listen to the person transmitting without changing channels 1 To start scanning briefly press 1 The scan icon Z displays and the radio begins to scan the channels When the radio detects activity it stops on that channel and displays q and the channel number 2 To talk to the person transmitting without switching channels pr
31. t and 16 AWG for lengths up to 150 feet The supply cord of this charger cannot be replaced If the cord is damaged call Motorola Product Services at 1 800 448 6686 in the USA or 1 888 390 6456 TTY Text Telephone c O Par T O am O Oo Le an PA ae a Radio Controls Microphone Use to Turn radio on off Adjust radio volume Use to N Transmit call tone Accessory Jack 5 Use Push to Talk to y O Talk Exit a menu Use and 4 to So Change channels Use sx to CLS1410 only Monitor the frequency MOTOROLA Change menu settings Scan channels CLS1410 only 0000009 Speaker Use to Lock the keypad scroll through menus Getting Started Installing the Swivel Belt Holster 1 Slide the bottom of the radio into the holster until it snaps into place 2 To remove push the tab on the holster and pull the radio away from the holster Note Incase of loss please contact your point of sale or call 1 800 448 6686 to request replacement part number HCLN4013 56532 Swivel Belt Holster Getting Started Installing the Batteries Your radio uses a rechargeable Lithium lon Li lon battery Li lon Battery 1 If the battery door is already in place push down on the recess on the door and slide it off the radio 2 Insert the battery printed arrows first into the battery compartment and press down to secure firmly in place 3 S
32. t the channel you want to remove from the scan list 3 Press won to display either y to include the channel or m to exclude the channel 4 Press and hold Push to Talk to exit programming mode or press won to continue programming Cloning Radio Settings You can copy series radio settings from one radio the source to a second radio using the 56531 Multi Unit Charger MUC optional accessory See the MUC User s Guide for more information You can clone only one radio at a time A multi channel radio can clone to a single channel radio but only the first channel is cloned The MUC does not have to be plugged in for cloning but both radios require charged batteries 1 On the source radio press and hold Push to Talk and won for 3 seconds while turning the radio on The radio beeps and displays Ada 2 Place the source radio in one of the charging pockets 3 Turn the target radio on and place it in the charging pocket that is paired with the pocket containing the source radio There are 3 paired charging pockets as indicated by the 3 pairs of charging status LEDs 4 Press and hold won on the source radio The source radio transmits its settings to the target radio If cloning was successful P or Pass or F for Fail displays on the source radio and the target radio displays all feature icons If cloning was not successful F or Fail displays on the source radio Turn the target radio off and back on again to use To
33. tromagnetic interference EMl if inadequately shielded designed or otherwise configured for electromagnetic compatibility c O Par T O am O O Le an PA ae a O prar T O Ge Q Q O Le C PA _ a Facilities To avoid electromagnetic interference and or compatibility conflicts turn off your radio in any facility where posted notices instruct you to do so Hospitals or health care facilities may be using equipment that is sensitive to external RF energy Aircraft When instructed to do so turn off your radio when on board an aircraft Any use of a radio must be in accordance with applicable regulations per airline crew instructions Medical Devices Pacemakers The Advanced Medical Technology Association recommends that a minimum separation of 6 inches 15 cm be maintained between a handheld wireless radio and a pacemaker These recommendations are consistent with the independent research by and recommendations of the U S Food and Drug Administration Persons with pacemakers should ALWAYS keep the radio more than six inches 15 cm from their pacemaker when the radio is turned ON e Not carry the radio in the breast pocket Use the ear opposite the pacemaker to minimize the potential for interference e Turn the radio OFF immediately if you have any reason to suspect that interference is taking place Medical Devices Hearing
34. ure Antenna Care Use only the supplied or an approved replacement antenna Unauthorized antennas modifications or attachments could damage the radio and may violate FCC regulations DO NOT hold the antenna when the radio is IN USE Holding the antenna affects the effective range Two Way Radio Operation When using your radio as a traditional two way radio hold the radio in a vertical position with the microphone 1 to 2 inches 2 5 to 5 cm away from the lips Body Worn Operation To maintain compliance with FCC Health Canada RF exposure guidelines if you wear a radio on your body when transmitting always place the radio in a Motorola supplied or approved clip holder holster case or body harness for this product Use of non Motorola approved accessories may exceed FCC Health Canada RF exposure guidelines If you do not use one of the Motorola supplied or approved body worn accessories and are not using the radio held in the normal use position ensure the radio and its antenna are at least 1 inch 2 5 cm from your body when transmitting Data Operation If applicable when using any data feature of the radio with or without an accessory cable position the radio and its antenna at least 1 inch 2 5 cm from the body Approved Accessories For a list of approved Motorola accessories visit our website at www motorola com Electromagnetic Interference Compatibility Note Nearly every electronic device is susceptible to elec
Download Pdf Manuals
Related Search