Melitta ME10TDS User's Manual
Contents
1. SAFEGUARDS WARNING This appliance generates heat and escaping steam during use Use proper precautions to prevent the risk of burns fires or other injury to persons or damage to property All users of this appliance must read and understand this Use and Care Guide before operating or cleaning this appliance The cord to this appliance should be plugged into a 120V AC electrical outlet only Use water only in this appliance Do not put any other liquids or food products in this appliance Do not mix or add anything to the water placed in this appliance except as instructed in the User Maintenance Instructions to clean the appliance DO NOT attempt to move an appliance containing hot liquids Allow appliance to cool completely before moving Keep appliance at least 4 inches away from walls or other objects during operation Do not place any objects on top of appliance while it is operating Place the appliance on a surface that is resistant to heat If this appliance begins to malfunction during use immediately unplug the cord Do not use or attempt to repair the malfunc tioning appliance If this appliance falls or accidentally becomes immersed in water or any other liquid unplug it immediately Do not reach into the water Do not use this appliance after it has fallen into or has become immersed in water Contact Consumer Service for examination and repair Do not leave this appliance unattended during use The appliance must be l2. Store coffee in a cool dry place Once coffee has been opened keep it tightly sealed in the refrigerator to maintain freshness For optimum coffee buy whole beans and grind them just before brewing Do not re use coffee grounds since this will greatly impair coffee flavor Reheating coffee is not recommended Coffee is at its peak fla vor immediately after brewing Small oil droplets on the surface of brewed black coffee is due to the extraction of oil from the coffee grounds Oiliness may occur more frequently if heavily roasted coffees are used Over extraction may also cause oiliness indicating a need to clean your Coffeemaker User Maintenance Instructions This appliance requires little maintenance It contains no user serviceable parts Any servicing requiring disassembly other than cleaning must be performed by a qualified appliance repair technician WARNING Unplug from wall outlet before cleaning Care And Cleaning Instructions 1 Always make sure Coffeemaker is unplugged and Base Plate is cool before attempting to clean 2 After daily use the Removable Filter Basket Thermal Carafe and Carafe Lid should be washed in warm soapy water 3 If necessary wipe the outside of the Coffeemaker with a soft damp cloth and wipe dry Do not use abrasive cleansers scour ing pads or steel wool Special cleaning of your Coffeemaker is recommended at least once a month depending on frequency of use and quality of water used
3. in the unit If water in your area is especially hard the follow ing cleaning procedure should be performed every two weeks since minerals in water can detract from the flavor of the coffee and possibly lengthen brew time 1 Fill the Carafe with one part white vinegar to three parts cold water Pour water and vinegar solution into the Water Chamber 2 Open the Hinged Filter Lid place a paper filter in the Remov able Filter Basket then close the Lid Place Carafe on Base Plate Press the Power Select Button to ON Note During cleaning more steam will occur than during normal brewing 3 KEEP THE COFFEEMAKER ON UNTIL HALF THE WATER HAS CYCLED THROUGH THE COFFEEMAKER AS CAN BE VIEWED THROUGH THE WATER LEVEL INDICATOR Press the Power Select Button to OFF When liquid stops dripping from the Removable Filter Basket into the Carafe remove the Carafe and allow the liquid to cool for 10 minutes When cooled pour liquid back into the Water Chamber 4 Return Carafe to Base Plate 5 Switch control to ON Repeat procedure allowing all the clean ing solution to empty into the Carafe After dripping has stopped discard contents in Carafe 6 After allowing the Coffeemaker to cool for 10 minutes rinse it out by brewing a Carafe full of cold water Make sure to insert a fresh filter into the Removable Filter Basket before brewing 10 7 At the end of the brew cycle press the Power Select Button to OFF Discard water in the Carafe Rem
4. ELECTRIC SHOCK DO NOT REMOVE THE BOTTOM COVER NO USER SERVICEABLE PARTS INSIDE REPAIR SHOULD BE DONE BY AUTHORIZED SERVICE PERSONNEL ONLY Your product may vary slightly from illustration Parts Identification Water Level Indicator Control Panel Carafe Lid P N 30974 Carafe P N 30973 Base Plate FIGURE 1 AUTO Light ON light RED GREEN Time Select Button Power Select Button CLOCK TIMER CLOCK TIMER Button FIGURE 2 Water Reservoir Cover P N 30977 Removable Filter Basket P N 30976 FIGURE 4 FIGURE 3 Before Using Your Thermal Coffeemaker WARNING To reduce risk of fire or electric shock do not immerse Cord Plug or appliance in water or any other liquid 1 Before preparing coffee in your new coffeemaker thoroughly clean the Carafe Carafe Lid and Removable Filter Basket in warm soapy water Rinse and dry Replace disassembled parts Note The Removable Filter Basket must be placed into the coffeemaker with the arrow pointing toward the back of the unit 2 Clean the inside of the coffeemaker by brewing two full Carafes of tap water see Brewing Instructions Do not place a filter or coffee in the Removable Filter Basket for this initial cleaning Note At the end of the first brewing cycle turn the Coffeemaker off and wait ten minutes for the appliance to cool Turn unit on and brew second Carafe of cool water Coffee Filters Cone shaped paper filters are availa
5. LIMITED IN DURATION TO ONE 1 YEAR FROM THE DATE OF PURCHASE Some states do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you Warranty Performance During the above one year warranty period a prod uct with a defect will be either repaired or replaced with a reconditioned com parable model at our option when the product is returned to the Repair Center or the purchase price refunded The repaired or replacement product will be in warranty for the balance of the one year warranty period and an additional one month period No charge will be made for such repair or replacement Service and Repair Should the appliance malfunction you should first call toll free 1 800 233 9054 between the hours of 9 00 am and 5 00 pm Central Standard Time and ask for CONSUMER SERVICE stating that you are a con sumer with a problem Please refer to model number ME10TDS when you call 11 In Warranty Service USA For an appliance covered under the warranty period no charge is made for service or postage Call for return authorization 1 800 233 9054 Out of Warranty Service A flat rate charge by model is made for out of war ranty service Include 8 00 U S for return shipping and handling We will notify you by mail of the amount of the charge for service and require you to pay in advance for the repair or replacement For products purchased in the USA but used in Canada You may return the p
6. MIN Button until the desired minutes have been reached Note Unplugging the unit will reset the clock to 12 00 Presetting The Brewing Cycle To preset your Coffeemaker to begin brewing at a later time first fol low steps 1 3 in the Brewing Instructions section Check to make sure that the clock is set to the correct time If it is not follow the above instructions to set the clock Press the CLOCK TIMER But ton once the Digital Display will show AUTO BREW Press the HOUR and MIN Buttons until the desired brew time is reached Make sure the proper AM PM appears on the left side of the Digi tal Display Press the Power Select Button once The red AUTO light will illuminate indicating that the Coffeemaker is now waiting for the preset brew time to be reached before it begins the brewing cycle Auto Shut Off As an added convenience your Coffeemaker has been designed with an Auto Shut Off feature When the brewing cycle is complete the Coffeemaker will automatically shut off Hints for Great Tasting Coffee Aclean Coffeemaker is essential for making great tasting coffee Regular cleaning as specified in User Maintenance Instructions is highly recommended Always use fresh cool water in your Coffeemaker Finer grinds such as drip and ADC coffee pro mote fuller extraction and provide rich full bodied coffee Regu lar grind will require slightly more coffee per cup to provide the strength of a finer grind
7. READ AND SAVE THESE INSTRUCTIONS L2 Thermal Coffeemaker USE AND CARE GUIDE FOR MODEL ME10TDS IMPORTANT SAFEGUARDS When using electrical appliances basic safety precautions should always be followed including the following Read all instructions Do not touch hot surfaces Use handles or knobs To protect against electric shock do not place cord plugs or appliance in water or other liquid Close supervision is necessary when any appliance is used by or near children Unplug from outlet when not in use and before cleaning Allow to cool before putting on or taking off parts and before cleaning the appliance Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner Contact Consumer Service for examination repair or adjustment The use of an accessory not evaluated for use with this appli ance may cause injuries Do not use outdoors Do not let cord hang over edge of table or counter or touch hot surfaces Do not place on or near a hot gas or electric burner or in a heated oven To disconnect turn any control to off then remove plug from wall outlet Do not use appliance for other than intended use Be certain Lids are securely in place before operating appliance Scalding may occur if the Lids are removed during the brewing cycles SAVE THESE INSTRUCTIONS THIS PRODUCT IS FOR HOUSEHOLD USE ONLY ADDITIONAL IMPORTANT
8. ble locally at grocery stores and where coffeemakers are sold Standard 4 filters should be used Permanent gold filters may also be purchased eliminating the need for disposable paper filters The use of basket style paper filters is not recommended since they do not conform to the shape of the Removable Filter Basket and may cause coffee to back up and spill over during brewing Brewing Instructions 1 Place the Thermal Coffeemaker on a flat level surface Plug the unit into a 120V AC electrical outlet 2 Press the Filter Lid Release Button to open the Hinged Filter Lid 3 Place a 4 cone shaped paper filter into the Removable Fil ter Basket Measure one level tablespoon of drip or regular grind coffee for each cup of coffee desired For stronger or milder coffee adjust amount of coffee to suit your taste Note We recommend using coffee ground specifically for automatic drip coffeemakers Close the Hinged Filter Lid Raise the Water Reservoir Cover Fill the Thermal Carafe with cold water and pour it into the Water Reservoir to the desired level No less than two cups are recommended Important Always use fresh cool water in your appliance Warm water or other liquids except as listed in the Care and Cleaning Instructions may cause damage to the appliance Note The amount of brewed coffee will always be less than the amount of water placed into the coffeemaker since about 10 is absorbed by the coffee grounds and fil
9. eft to cool down sufficiently before adding more water to avoid splattering Always use fresh cool water in your appliance Warm water or other liquids except as listed in cleaning section may cause damage to the appliance DO NOT put Carafe into a microwave DO NOT lift Hinged Filter Lid until brewing is complete and all parts have cooled The Carafe is designed for use with this appliance It must never be used on a range top Do not use a damaged Carafe or a Carafe having a loose or weakened handle CAUTION To prevent injury when utilizing Pause and Pour drip stop feature replace Carafe within 20 seconds of removing dur ing brewing process POLARIZED PLUG This appliance has a polarized plug one blade is wider than the other To reduce the risk of electric shock this plug is intended to fit into a polarized outlet only one way If the plug does not fit fully in the outlet reverse the plug If it still does not fit con tact a qualified electrician Do not attempt to modify the plug in any way SHORT CORD INSTRUCTIONS A short power supply cord is pro vided to reduce the risk resulting from becoming entangled in or tripping over a longer cord The use of extension cords is not recommended ELECTRIC POWER If the electric circuit is overloaded with other appliances your appliance may not operate It should be operated on a separate electrical circuit from other appliances WARNING TO REDUCE THE RISK OF FIRE OR
10. h of war ranty and breach of contract Repair replacement or refund shall be the sole remedy of the purchaser under this warranty and in no event shall Salton Inc be liable for any incidental or consequential damages losses or expenses Some states do not allow the exclusion or limitation of incidental or conse quential damages so the above limitation or exclusion may not apply to you Legal Rights This warranty gives you specific legal rights and you may also have other rights which vary from state to state For more information on Salton products Visit our website www eSalton com 2003 Salton Inc P N 61306 All Rights Reserved Printed in China
11. location If so seal the Thermal Carafe by turning the Carafe Lid clockwise until tight The Thermal Carafe will maintain the serving temperature for several hours 10 Switch coffeemaker to OFF since unit is not in use 11 To brew another Carafe of coffee turn unit OFF and wait 10 min utes to allow heating element to cool Important If unit is not allowed to cool before immediate repeated use water placed in water chamber may become overheated and a spray of steam could be released from opening creating a risk of burns 12 When not in use unplug the Base Assembly from the wall out let Allow the unit to cool completely before cleaning See User Maintenance Instructions Brewing A Second Pot Of Coffee As mentioned above it is recommended that the Coffeemaker should be in the Off position for 10 minutes between cycles in order to allow unit to cool While unit is in the Off position dispose of used coffee filter rinse Carafe and the Removable Filter Basket in water Place a fresh filter in basket Repeat brewing procedure Using the Timer Control Your coffeemaker has a built in multifunction Timer The following sections describe the proper use of the Timer Setting The Clock To set the clock simply press and hold the CLOCK TIMER Button and press the HOUR Button until the desired hour has been reached Make sure the proper AM PM indicator is shown on the left side of the Digital Display Press the
12. ove used filter and wash the Carafe and Removable Filter Basket in warm soapy water Rinse and Dry 8 When Coffeemaker has cooled wipe exterior with a dry cloth IMPORTANT NOTICE If any parts are missing or defective DO NOT return this product Please call our Customer Service Department for assistance 800 233 9054 Monday Friday 9 00 am 5 00 pm CST Thank You LIMITED ONE YEAR WARRANTY Warranty This Melitta product is warranted by Salton Inc to be free from defects in materials or workmanship for a period of 1 year from the original purchase date This product warranty covers only the original consumer pur chaser of the product Warranty Coverage This warranty is void if the product has been damaged by accident in shipment unreasonable use misuse neglect improper service commercial use repairs by unauthorized personnel normal wear and tear improper assembly installation or maintenance abuse or other causes not aris ing out of defects in materials or workmanship This warranty is effective only if the product is purchased and operated in the USA and does not extend to any unit which has been used in violation of written instructions furnished with the product or to units which have been altered or modified or to damage to products or parts thereof which have had the serial number removed altered defaced or rendered illegible Implied Warranties ANY IMPLIED WARRANTIES WHICH THE PUR CHASER MAY HAVE ARE
13. roduct insured packaged with sufficient protection and postage and insurance prepaid to the USA address listed below Please note that all cus toms duty brokerage fees if any must be paid by you and we will require you to pay the cost of customs duty brokerage fees to us in advance of our per forming any service Risk During Shipment We cannot assume responsibility for loss or dam age during incoming shipment For your protection carefully package the product for shipment and insure it with the carrier Be sure to enclose the fol lowing items with your appliance any accessories related to your problem your full return address and daytime phone number a note describing the problem you experienced a copy of your sales receipt or other proof of pur chase to determine warranty status C O D shipments cannot be accepted To return appliance ship to To contact us please write to call or email Attn Repair Center Salton Inc Salton Inc P O Box 6916 708 South Missouri Street Columbia MO 65205 6916 Macon MO 63552 1 800 233 9054 Email Salton Saltonusa com Limitation of Remedies No representative or person is authorized to assume for Salton Inc any other liability in connection with the sale of our products There shall be no claims for defects or failure of performance or product failure under any theory of tort contract or commercial law including but not limited to negligence gross negligence strict liability breac
14. ter For optimal thermal retention preheat the Thermal Carafe by rinsing it with hot water Place the Carafe Lid on the Carafe and turn clockwise until the arrows are aligned Coffee will not flow in correctly if misaligned Place the Carafe on the Base Plate In order to turn unit on press the Power Select Button twice By pressing once the timer can be set please refer to page 9 The green ON light will illuminate indicating that the brew ing cycle has begun Hot water will be dispensed gently and evenly through the coffee grounds When all the water has been pumped out of the Water Reservoir the coffeemaker will switch off automatically Note If you prefer to use the Timer to preset the Coffeemaker see the Using the Timer Control section To pour a cup of coffee before the brew cycle is complete simply remove the Thermal Carafe from the Base Plate and pour Brewing will continue but dripping will automatically pause Return the Thermal Carafe to the Base Plate within 20 seconds dripping will resume CAUTION To prevent injury when utilizing Pause and Pour drip stop feature replace Carafe within 20 seconds of remov ing during brewing process Upon completion of the brew cycle wait until dripping has stopped before removing the Carafe The Carafe Lid should be kept in place to facilitate safe serving and help keep coffee at proper serving temperature You may wish to remove the Thermal Carafe to a more convenient
Download Pdf Manuals
Related Search