Home

Magnadyne M4-LCD User's Manual

1. Bm button n 3 The unit will reset the radio area and wallpaper mom mm me to factory default settings m M Sound Controls Volume Increase the volume by pressing the side of E the button Increase Decrease the volume by pressing the side of D the button ecrease Equalizer Interface Enter the Equalizer Interface from the majority of source menus Equalizer Presets Press the 4 or P to access the pre defined equalizer setting Choose between Optimal n TED EQ OFF Pop Rock Metal Dance Electronic ah al TT Country Jazz Classical Bluesy Old Operatic shes Speech and UserDefine Press to save and return to previous source ii Note 1 Each one of these pre defined equalizer setting can be customized to fit your taste Select the equalizer setting you want to adjust then use the or buttons to adjust the sound Note 2 To reset the pre defined equalizer set tings to factory specifications press and hold the button for a few seconds Loudness To boost high and low tones at low volume levels press the OFF button to activate Loud ee Press the CON button to deactivate the Loud feature aa gt em e mmm 62 125 250 500 BASS Turning Off the Equalizer To deactivate the graphic equalizer press the button Press the button to activate the equalizer A o g PATA Sound
2. 3 Touch the 3 green phone to make the call GES ED 9 Answering Calls 1 Make sure the mobile phone is connected to M4 LCD M3 LCD 2 The incoming call s phone number will appear in the display 3 Touch the 3 green phone to answer the call l 3s I 1311672567 lt o 2G 39 Bluetooth Operation continued Ending a Call Touch the red phone to end the call B O O HOE TRG 1311672567 11 a Connecting an Already Used Phone The M4 LCD M3 LCD automatically connects itself to le the last phone you used with it If you want to connect he e _ the nit to another phone you already paired 1311672567 d Aho Te mem 1 Make sure the Bluetooth is turned off of the last 2 mobile phone that was connected to the unit ERE 2 Make sure the Bluetooth is activated on the phone pu you want to connect 3 Touch the 4 to refresh the M4 LCD M3 LCD to allow connection to the new phone Last Phone Number Redial 1 Make sure the mobile phone is connected to the unit 2 Press the button and the last number will be dialed automatically 3 Touch the red phone to end the call Phone Log 1 Make sure the mobile phone is connected to the unit 2 Press the 6 button to enter the Bluetooth phone log interface 3 Select between Calls Dialed Calls Received or Calls Missed 4 Press the A or button to sc
3. Co MAGNADYNE Operation and Installation Manual Models M3 LCD and M4 LCD AM FM WB Stereo Receiver with Disc Player and Touch Screen Controls Introduction Please carefully read all of the information in this manual Familiarity with operation and installation proce dures will help you obtain the best possible performance from your new AM FM WB Stereo Receiver and Disc Player with Touch Screen Controls WARNING To prevent fire or electrical shock hazard do not expose this product to moisture or remove its cover or bottom screws No user serviceable parts inside Refer servicing to qualified personnel Warnings and Cautions Button Locations and Functions Remote Control Button Locations and Functions Basic Operation System Setup Language Setting the Clock Radio Setup GPS Setup Brightness Adjustment System Setup Calibration Setup Audio Setup Wallpaper Setup Background Reset Sound Controls Screen Dimmer Wallpaper Radio Operation AM FM Radio Operations Weather Band Operations Disc Operation Disc Warnings Music Disc Operation MP3 Operation DISC USB and SD CARD Movie Disc Operation Movie Disc Setup Menu GPS Navigation GPS Navigation Operation M4 LCD Only Operation Bluetooth Operation Bluetooth Operation Satellite Radio Satellite Radio Setup Satellite Radio Operation IPOD Operation IPOD Operation Camera Operation Camera Operation Auxiliary Inputs Auxiliary Audio Video Inputs Operation Operation Installa
4. gt 9G Installation Step 1 The radio chassis is designed to be Sleeve Mounted through an opening in the dashboard panel The required opening size is 182mm 7 3 16 x 84mm 3 5 16 Cut or engage an opening in the dashboard to accommodate the mounting sleeve Step 2 Insert the mounting sleeve into the opening in the dashboard Bend the metal tabs on the sleeve to secure the mounting sleeve to the dashboard Step 3 Bring all wiring for the connection of the unit including the antenna through the center of the mounting sleeve Sheet Metal Screw Nut waster Metal Strap Dashboard Mounting Sleeve Removing the Unit To remove the radio after installation insert the removal keys straight back until they click Push the keys outward Then pull the radio out Note If the removal keys are inserted at an angle they will not release the radio Insert Removal Keys Here 49 Speaker Connections Left White Black Wire Gray Black Wire Right D Front i Front Speaker White Wire Gray Wire MAI Speaker Brown Black Wire m Center m Channel Brown Wire Speaker Left Am Green Black Wire Violet Black Wire 7 Right Rear Rear Speaker IW Green Wire Violet Wire Speaker 50 Input and Output Connections This unit for use only with a 12 Volt DC power source with a negative
5. A channel not covered by your contract or the tuner is not acti vated Call Sirius Service Center 1 866 635 2349 or visit them online at www siriusxm com Channel Selection Modes Channels are selected by the following methods e Manual Tuning Use the Manual Tuning method to scan thru the channels Direct Tuning Use the Direct Tuning methods when you know the desired channel Category Tuning Use the Category Tuning method when you know what category you want to scan for a channel Manual Tuning Press the CH or CH button until the desired channel appears in the display SONG TITLE ARTIST COMPOSER CATEGORY NAME CH CH IR BAND CH LIST CATEGORY MENU Direct Tuning 1 Press the MENU button SONG TITLE ARTIST COMPOSER CATEGORY NAME CH SIR BAND CH LIST CATEGORY PRESET MENU 2 Press the DIRECT CH button SKIP CH 3 Enter the channel number then press the ENTER button For example For Sirius Channel 121 press 1 2 1 and then press the ENTER button The channel will auto matically start playing Note To enter a new number press the CLEAR button before entering a new channel numbers 39 Satellite Radio Operation Continued Channel Selection Modes continued Category Tuning 1 Press the CATEGORY button 2 Use the A or V buttons to select the Category The Category can also be selected by touching the desired category on the screen To select the Channel use the A or
6. Press the button during playback Each time the button is pressed the subtitle lan guage changes The selection of subtitle appears at the top of the screen TE cm 9G Notes 1 Some discs may contain only one subtitle language 2 Depending on the disc the number of subtitle languages may be different Angle View Selection 1 Touch the screen to reveal the disc controls 2 Press the spe in lower right hand corner of the screen 2 times to reveal the secondary disc controls 3 Press the E94 button depending on the char acteristics of the movie disc the angle func tion may be invalid This is not a malfunction Zoom Selection 1 Touch the screen to reveal the disc controls 2 Press the in lower right hand corner of the screen 2 times to reveal the secondary disc controls 3 Press the button to enlarge the on screen image during disc play Each time the button is pressed the magnification incre ment changes in the following order 2X 3X 4X 1 2 1 3 1 4 4 Use the navigation buttons E from the disc controls to move the image on the screen On Screen Display Selection 1 Touch the screen to reveal the disc controls 2 Press the in lower right hand corner of the screen to reveal the secondary disc controls 3 Press the OSD button during movie play to display the following information in this order for most discs Title Elapse Title Remain Chapter Elapse Chapter
7. button to select America 1 America 2 Japan Russia or Europe radio area Refer to the map on the screen for location of the settings Press HOME to save and return to Homepage GPS Setup M4 LCD Only The M4 LCD comes preloaded with the GPS soft ware and is ready to use no updating is necessary Loading the GPS software 1 Remove the SD card from the rear card reader 2 send the GPS SD card to an authorized service center 3 Replace the SD card into the rear card reader 4 Enter the GPS setup menu from the Setup menu 5 Select the desired iGO GPS exe file from the iGO folder 6 Click the button to load the file and to exit GPS path setup Note The iGO folder in the SD card is the GPS program Do not delete any files in it Brightness Adjustment Press either or button to adjust the screen s brightness Press HOME to save the setting and return to the Homepage System Setup 1 To access the system interface type the pass word 5365 and click the button Month Day Year Hour Min Pr ie 3 o i1 OS o Please enter password m System Setup Continued System Setup Continued 2 A The SYS system buttons deactivate and activate system features B The Effect buttons changes the way the unit transitions from one screen to another screen 3 Once selections have been made press the button to exit the system setup menu Calibration Se
8. Controls Continued Equalizer Interface continued Balance and Fader Press the gt lt button to activate the speaker adjustment screen Use the 4 4 buttons to adjust the speaker s balance and fader Press the button to return to the factory settings Center Speaker To activate the center speaker press the OFF button Press the CON button to deactivate the center speaker Press to save and return to previous source or press i j button to return to the equalizer interface Mute The majority of source menu options have a MUTE button Pressing the MUTE button will mute the volume level Press again to restore the volume level 2 2 0 man Fr Dimming the Screen Pressing the button will dim the display Pressing the button will return the display to normal brightness Setup Background Image Press the button to access wallpaper setup features 2 Either select a file pre stored in the system or select Scan SD and select an image from the rear SD GPS Card holder 3 Touch to save the image and the unit will automatically return to the main interface 4 Press to save and return to previous screen Satellite 03 19 2011 SAT Radio Operation Power On Off Press the power button D to turn the unit on Selecting the Radio Source Touch the HOME button to activate the Homepage screen Touch the Radio button to enter t
9. Disc Setup Menu a movie disc has to be inserted radio station is tuned in 22 Cursor A gt V Moves feature selec Music Disc Press to change to a lower or tion up down left or right higher track 23 OK Confirms the selected item Movie Disc Press to change to a lower or higher chapter 9 24 Select SEL Accesses the Sound menu 13 Repeat Repeats play of chapters titles tracks 9 Mute Mutes the volume and discs 26 Slow Motion p Press to play the movie 14 Shuffle Plays all the tracks on the music disc disc in slow motion in random order 27 Back Selects previous screen 15 Numeric Keypad Inputs the corresponding 28 Angle Changes the view angle on multi angle number movie discs 16 Eject amp Ejects the loaded disc 29 Zoom Enlarges or reduces the size of movie picture 17 Mode Switches through the available sources NEM 30 Goto Used in conjunction with the numeric n Dans Une END B keypad to skip to the desired chapter ip i de 31 Traffic Announcement TA Activates the traffic announcement function See the Radio Loudness Press and hold button until LOUD Operations section for more information ON appears in the display to boost high and low tones at low volume levels To deacti 32 PTY Activates the PTY screen which scans FM vate press and hold again until LOUD OFF radio stations according to program type appears in the display 33 Subtitle SU
10. Remain and Display Off 22 Movie Disc Operation continued Direct Chapter Selection 1 Touch the screen to reveal the disc controls 2 Press the spe in lower right hand corner of the screen to reveal the secondary disc controls 3 Press the button to show the number key pad Select the numbers keys to directly select the desired chapter 4 Press button to execute your selection Screen Adjustment Controls 1 Touch the screen during movie playback to reveal the disc controls Press the sp in lower right hand corner of the screen to reveal the secondary disc controls 3 Press the button to access the screen adjustment controls 4 Press or buttons to change the display to suit your taste 5 Wait a few seconds after making the adjust ments and the adjustment controls will disappear Note Press the RESET button to return the screen to the factory settings Slow Motion Continue to press the gt button on the remote to play the movie is slow motion in the following order SF 1 2 SF 1 3 SF 1 4 SF 1 5 SF 1 6 SF 1 7 To resume normal play press the II button Ejecting a Disc Press the amp button to eject a disc 0 eee eR osD amp Brightness Contrast Saturation Sharpness Hue 23 Movie Disc Setup Menu Note To access the Movie Disc Setup Menu a movie disc has to be inserted Movie Disc Setup Menu 1 Touch the sc
11. a cloth moistened with a mild cleaner Note Applying spray cleaner directly to the unit may affect its mechanical parts or cause an electrical shock Wiping the screen with an abrasive cloth or using a volatile liquid such as thinner or alcohol may scratch or damage the surface of the screen 3 Button Locations and Functions 1 2 3 4 96 Volume Button Push to increase or to decrease the volume level Power Navigation Button D Press to turn the unit on Press and hold for 3 seconds to turn the unit Off Press and release to switch to Navigation mode press and release again to return to last source Note Navigation only available on M4 LCD LCD Display Touch to interact with the display screen Disc Slot To play a disc insert a disc into the slot with the label facing up 9 6 Eject Button Press to eject a disc Infrared Eye Receives the signals from the remote control SD Card Slot Insert the SD card to play record ed music data Notes This unit may not play all SD cards The manufacturer of this unit is not responsible for any data loss We suggest you back up your data USB Input Plug in your USB device USB will appear in the display Note This unit may not function with all MP3 players The unit will control the USB audio device See MP3 Operation for more details Audio Video Input Jack Plug in a device with a 3 5mm audio input plug The M4 LCD M3 LCD
12. button to search a station with the selected program type PTY Once a station has been found it will automatically Start playing Weather Band The weather band is accessible from the Radio screen Press the WB button and the strongest weather band station will automatically be select ed and start playing PEF 13 Weather Band Operation Power On Off Press the power button D to turn the unit on Selecting the Weather Band Radio Source Touch the HOME button to activate the Homepage screen Press the in the lower right hand corner of the screen to reveal the second Homepage screen Touch the WB button and the strongest weather band station will automatically be selected and start playing Notes 1 The remaining weather band stations will be stored in the Radio Station Recall buttons Touch any of the Radio Station Recall buttons to select another weather band station 2 exit the weather band screen touch the BAND button to select the AM FM radio sta tion screen or press the HOME button to select another source Camera AV IN1 AV IN2 Setup 03 19 2011 SAT Handling e Dirt dust scratches and warping disc will cause non operation Do not place stickers on disc or scratch disc Do not place discs in the following places Direct sunlight dirty dusty or damp areas near car heaters car seats or dashboard Disc Cleaning Use a dry soft cloth to wipe the disc s surface If
13. ground Red Wire to 12 Volt Ignition __ p Yellow Wire 4 to 12 Volt Constant 1A Fuse Black Wire Ground Orange Wire Parking Brake Switch E Blue Black Wire Dimmer Control Infrared Remote Sensor Optional IPOD Optional IPOD Cable RV5 HAR6 Optional 11 _ 5 91 Input and Output Connections Continued Blue Wire Power Antenna 12V Out Audio Input Left White m Audio Input Right Red __ es Video Input Yellow ee eE External TV Receiver Optional SiriusXm Antenna Optional SiriusXm Vehicle Tuner SXV100 Optional External Automotive Type Antenna Optional 92 Input and Output Connections Continued GPS Antenna Supplied M4 LCD Only Video Output Red IO IL Dunn B un 4E Video Output Blue IL le nm Video Output Green 5 n LO Sync Brown Audio Output Left White Audio Output Right Red Video Output Yellow Note Audio Output is not TV Monitor Optional controlled by the M4 LCD _ Video Output Yellow E uu Video Second Monitor Optional 53 C125 Front White Wire Left Trigger 12V Gray Wire Right Trigger 12V Green Wire Rear Trigger 12V Green Connector REAR Ta C125 Rearview RIGHT TRIG JL 09 2 Gray Connecto
14. is the next route event Press 5 Current position to open the Route Information screen 6 Next street 2 Second upcoming route event Press to open the Active route trip itinerary 8 Current street and house number 3 Trip data Press to open the Trip information screen MM 9 Destination 4 GPS position quality Press to open the quick menu Touch the Screen to Reveal More Features 12 T 13 14 11 15 10 Open Close Map control buttons 16 Smart Zoom Press to zoom in to your present 11 Map zoom in and zoom out location Note 3D map contains rotate left and rotate Note A button appears when GPS position is right and tilt up and tilt down controls available and you have moved the map so P gt is no longer visible Touch this button to move 12 Switch between 2D and 3D des i i the map back to the current GPS position 13 Detour Opens the Detour screen offering two way of modifying the route 17 Preset Zoom Press one of the preset buttons The list of Saved Search Criteria to zoom to a predefined value Press and hold A button to avoid parts of the route to set the current zoom level 14 Opens the Position menu Note In 3D mode these buttons are predefined 15 Menu Opens the Navigation menu tilt and zoom buttons Press and hold to set the current zoom and tilt levels 27 GPS Navigation Operation Only continued Selecting the Destination of a Route Selectin
15. menu item Same operation as the IPOD s Click Wheel The OK button has the same operation as the Center Select Enter button on an IPOD This button has the same operation as the MENU button on an IPOD e Press to access Track Controls Browse for a Song 1 Press the button until the screen con taining PLAYLIST ARTIST ALBUM GENRE and SONGS appears in the display 2 Use the and buttons until SONGS is highlighted in the menu gt 9139 IPOD b NOW PLAYING 13 OF 182 L CAST RECORDING THE WIZARD i CAROLE SHELLEY WICKED CORIGINAL CAST RECORDING 04 37 00 34 Navigation Controls 45 IPOD Operation Option Continued E JO Browse for a Song continued 3 Press the OK button 4 Press the or button to scroll through the songs 5 Press the OK button and the song will start playing 46 MY PAPER HEART YOUR STAR SWING SWING TIME STANDS STILLS ONE MORE SAD SONG MY PAPER HEART YOUR STAR SWING SWING TIME STANDS STILLS ONE MORE SAD SONG Camera Operation Automatic Camera Selection Rear View Camera The rear view camera will automatically activate when the ignition key is turned On and the vehicle is put into reverse The video image from the camera will appear on the screen and the audio from the rear camera can be heard through the vehicle s speakers Note This system only provides for one way audio from the camera to the M4 LCD M3
16. route at normal speed method of travel and warning icons and some 8 Fly Over You can run a demonstration of the of the functions you need while you navigate route at high speed tions control to modify the vehicle the road types 3 Edit Route The list of route points appear with used for route calculation or the route calcula the start point at the top of the list and the final tion method destination at the bottom Touch one of the route points in the list to edit You can move route points up or down in the list reverse the route optimize the route or remove a route point 4 Load Route You can navigate a route your previously saved You can choose to keep the current GPS position as the start point the route will recalculated starting from your current position 5 Save Route You can save the active route for later use 6 Delete Route Erase the active route with all it route points start point via points and destina tion 33 GPS Navigation Operation Only continued Manage Menu Touch the Manage icon to manage the content that the navigation system stores 1 4 2 5 gt Saved X 3 3 95 e Search 6 User Data Management 9 8 7 1 Saved Routed Renaming or deleting saved 7 Help No function routes 8 User Data Management You can manage the 2 Track Logs Recording simulating renaming or data you have saved example POls Favorites deleting track logs assignin
17. sec ondary controls Press the OSD button for the following sequence Elapse Time gt Time Remaining gt Display Off Repeating a File The unit s default setting is not to repeat To repeat a file 1 Touch the button to reveal the controls 2 Press the spe in lower right hand corner of the screen to reveal the secondary disc controls 3 Press the CC and REP OFF will appear in the display Press the CCS button until REP 1 appears the file will now play repeatedly The repeat feature operates in the following sequence Repeat Off REP OFF gt File Repeat REP 1 Repeat Directory REP DIR gt Repeat All REPEAT ALL gt Repeat Off REP OFF Random File Play Order Press the SHUFFLE button on the remote until RANDOM ON appears on the screen The files will play in random order To cancel this function press the SHUFFLE button until RANDOM OFF appears on the button Ejecting a Disc Press the amp button to eject a disc Removing a USB Device or SD Card Remove a USB device or SD card at any time by pulling the device out of the socket 2778 PPM MUTE EQ 19 Movie Disc Operation General Operations Gently insert the disc into the slot with the label side up The unit will automatically load the disc Note If a disc does not auto load DO NOT FORCE it into the slot as you may already have a disc loaded Power On Off Press the power button D to tur
18. will not control the device it just allows the audio video to be played through the system 10 Microphone 11 Restart Button Press the restart button if the unit freezes up or does not function correctly Remote Control Button Locations and Functions 1 9 Volume Decrease or Increase the volume level Power On Off Turn the unit On or Off Weather Band WB Press for direct access to the weather band radio Automatic Station Memory ASM Press and hold for automatic station memory storing Press and release for scanning memorizes sta tions Camera Press to change the source to camera mode Equalizer Sub Woofer EQ SUB W Choose between preset sound equalization settings Press and hold to turn the sub woofer On and Off Home Return unit back to the Homepage menu Title Displays the title menu that is stored on the movie disc Play Pause Starts and pauses disc play 10 Stop lg Stops disc play Remote Control Button Locations and Functions Continued 11 DVD Menu Displays the movie menu 19 Display Displays source information 12 Tune Track Chapter l lt lt q gt P 20 Audio Changes the language on multi language Radio Press and the tuner will scan to the movie discs next strong station and stop Press and hold until MANUAL appears in the display then release Then press again until the desired 21 Setup Access the Movie
19. you want to play Note If your file does not appear on the screen you must use file selection Method 2 Method 2 Using the Control Panel 1 Touch the button to reveal the file and folder controls 2 Press the sp icon in lower right hand corner of the screen to reveal the secondary controls Press the icon to reveal the navigation controls Use the Lt C LH buttons to navigate both the folders and file menus When the correct file has been located press the button oo I File Selection Touch the button to reveal the file and folder controls TT ALBUM BITRATE 96K FL Press the 14 button to select a lower file Press the button to select a higher file Pause Touch the button to reveal the file and oo i folder controls E Press the II button to pause the disc PAUSE II will appear in the display Touch the Il but ton again to resume play PRI SMITH gt 2 Mw 1W 18 MP3 Operation Disc USB and SD Card continued Stop Touch the button to reveal the file and folder controls Press the Bl button to stop play To resume play press the PII button Press the ll button 2 times then press the pl button and the first track from the first folder will start playing Display Touch the button to reveal the file and folder controls Press the mem icon in lower right hand corner of the screen to reveal the
20. B T Accesses movie disc s sub title languages Basics Operation Turning On Off the Unit Turning On f the unit was switched off by turning off the vehicle when the vehicle is started the unit will automatically turn on f the unit was switched off by pressing and holding the power button D for 3 seconds when the vehicle is started you must press the power button XD to turn the unit on Turning Off e Turning off the vehicle will automatically turn off the unit e Press the power button D for 3 seconds will turn the unit off Note M4 LCD Only Pressing and releasing the power button D switches the unit to the Navigation mode press and release again to return to last source Basics Operation continued Homepage Menu Is the initial or main screen where different sources or settings can be selected Accessing the Homepage Menu e n most source modes Radio Disc etc touch the screen in the upper right corner to reveal and or select the HOME button Selecting this button will switch the source screen to the Homepage The Homepage menu consists of 2 screens Press the m in the lower right hand corner of the screen to reveal the second Homepage screen e M4 LCD Only In the Navigation GPS mode the Homepage can be accessed by pressing and releasing the power button D Pressing the power button C again will switch the unit back to the Navigation GPS mode Not
21. ED WARRANTY OR IMPLIED WARRANTY 15 GIVEN EXCEPT THOSE SET FORTH HEREIN NO IMPLIED WARRANTY SHALL EXTEND BEYOND ONE YEAR FROM THE DATE OF SALE This warranty extends only to the original purchaser of the product and is not transferable Some states do not allow limitations on how long an implied warranty lasts and some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitations or exclusion may not apply to you This warranty gives you specific legal rights and you may have other rights that vary from state to state NOTE The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment Such modifications could void the User s authority to operate the equipment Defective merchandise should be returned to the original point of purchase or secondly to Magnadyne Corporation 1111 W Victoria Street Compton CA 90220 Return Authorization must be obtained before sending or merchandise may be refused Copyright 2011 Magnadyne Corporation M3 4 LCD UM Rev A 6 20 11
22. G TITLE Bleeding love ARTIST COMPOSER Leona Lewis Most Wutchuwanted CATEGORY CH CH SIR BAND CHLIST CATEGORY PRESET MENU 2 Press the SKIP CH button DIRECT CH 3 Select the channel to be skipped by high lighting the channel 001 Hits 1 002 StarLite 003 Love 004 Movin EZ 005 Gold 42 Satellite Radio Operation Option Continued Skipping a Channel continued 4 Press the 4 button and will appear next to the channel indicating that the channel is Skipped Reinstating a Skipped a Channel Select the channel to be reinstated by highlight ing the channel Press the button and a 4 will appear next to the channel indicating that the channel is reinstated 001 Hits 1 002 StarLite 003 Love 004 Movin EZ 005 Gold 001 Hits 1 002 StarLite 003 Love 004 Movin EZ 005 Gold 43 IPOD Operation Option General Operations 1 Press the power button C5 to turn the unit on 2 Connect an IPOD to the cable attached to the M4 LCD M3 LCD 3 The unit will automatically switch to the IPOD source screen and start playing Note The controls on the IPOD will become inop erable and the unit will now control the IPOD Selecting the IPOD Source Press the HOME button to select the source screen Then press the IPOD button to select the IPOD source IPOD Interface To access the IPOD interface controls Track and Navigation touch the screen
23. I Note Press the icon to select a city from z B8 m space recently used cities T 6 The map appears with the selected point in the middle of the screen Touch the Set as Destination button The route is then automatically calculated and you can start BE M x E navigating a S mm More Options Entering a Zip Code If you know at least a part of the address it is the quickest way to select the destination of the route 1 If in the Map mode touch the Menu button to access the Navigation Menu 2 In the Navigation Menu screen press the Find icon 29 GPS Navigation Operation M4 LCD Only continued Entering a Zip Code Continued 3 Touch the Find Address button 4 Select All States from the state menu 5 Select enter city name filter gt menu Using the keyboard enter the Zip Code Automatically the city appears on the screen Touch to con firm the city Next select the Street Name and House Number When the necessary destination information is entered press the Done button 6 The map appears with the selected point in the middle of the screen Touch the Set as Destination button The route is then automatically calculated and you can start navigating A destination can also be selected by using the following methods in the Find Menu Find POI Point of Interest The POI will search for points of interest around a given address Recent Places The destin
24. LCD The M4 LCD M3 LCD is unable to transmit audio to the camera Side View Cameras Left and Right if equipped The side view cameras will automatically activate when the ignition key is turned On and the vehicle s turn signal are used The video image from the camera will appear on the screen Note Side view cameras do not have audio Front View Camera The front view camera can not be automatically activated The front view camera can only be manually selected see Manually Selecting the Camera View below for more information Note Front view camera does not have audio Note Automatically activated camera views have priority over manually selected camera views For instance When a vehicle is put into reverse gear the rear camera view will automatically be displayed on the screen Manually Selecting the Camera View 1 Touch the HOME button to activate the mm Homepage screen Press the mmm in the 25 x y lower right hand corner of the screen to reveal apr mt the second Homepage screen Then press the Camera button to select the camera source screen 03 19 2011 SAT 2 Select a camera view Front Left Right or Rear by pressing the button associated with the camera view you want to display on the screen Note The front view camera may not be Selectable depending if the system has a front view camera 47 Auxiliary Audio Video Inputs Operation Note The M4 LCD M3 LCD will
25. Note The IPOD interface does not allow for direct screen selection of items you must use the controls at the bottom of the screen Track Controls Touch the screen to activate the track controls Play Pause EN Press the lIl button to pause the track IP will appear in the display To resume playing the disc press the I button Track Up Down ga Press the I button to select a previous track r3 Press the P button to select a next track Fast Rewinding Fast Forwarding 44 Press the button to fast rewind track To resume normal playback speed press again gt gt Press the Pl button to fast forward track To resume normal playback speed press again e Press to access Navigation Controls 44 040 tS gt NOW PLAYING 10F 182 MY PAPER HEART THE ALL AMERICAN REJECTS THE ALL AMERICAN REJECTS 01 04 02 44 NOW PLAYING MY PAPER HEART THE ALL AMERICAN REJECTS THE ALL AMERICAN REJECTS 02 44 IPOD b NOW PLAYING 13 OF 182 THE WIZARD AND CORIGINAL CAST Ri CAROLE SHELLEY WICKED CORIGINAL CAST RECORDING Track Controls IPOD Operation Continued Navigation Controls Touch the screen to activate the track controls Press the sp in lower right hand corner to acti vate the navigation controls Navigation Press the button to scroll up through the menu item Same operation as the IPOD s Click Wheel Press the button to scroll down through the
26. V but tons The channel can also be selected by touching the desired channel on the screen 3 Once the ENTER button is pressed the channel will start playing Channel List 1 Press the CH LIST button to access the mas ter channel List menu 2 Scroll through the channels by pressing the A or V button Press the desired channel and the channel will start playing Press the ENTER button to return to the main satellite radio screen 40 n E Qon E o Oz SONG TITLE ARTIST COMPOSER CATEGORY NAME SIR BAND MENU Channels within Category Category 7 001 Hits 1 02 Rock 002 StarLite 003 Love 04 Hip Hop 004 Movin EZ 05 R amp B 005 Gold BACK 01 Pop 040 Hip Hop 02 Rock 043 Back Spin 03 Elec Dnc Pi 045 Shade 45 04 050 Hot Jamz SONG TITLE Bleeding love ARTISTICOMPOSER Leona Lewis Most Wutchuwanted CATEGORY NAME Pop CH CH SIR BAND CHLIST CATEGORY PRESET MENU 002 StarLite 003 Love 004 Movin EZ 005 Gold Satellite Radio Operation Continued Programming Preset Satellite Channel 1 Tune in the desired channel then press the PRESET button to access the preset channel ET TT menu ARTIST COMPOSER Leona Lewis Most Wutchuwanted CATEGORY NAME Pop CH CH SIR BAND CHLIST CATEGORY PRESET 2 To program the channel press and hold any one of the six channel recall buttons until you see the Preset Numb
27. at the option of the Magnadyne Corporation or its authorized agents if said product or part is found defective in materials or workmanship when properly connected and operating on the correct power requirements designated for the specific product This warranty and Magnadyne Corporation or its authorized agent s obligations hereunder do not apply where the product was damaged while in the possession of the consumer subjected to unrea sonable or unintended use not reasonably maintained utilized in commercial or industrial Operations or serviced by anyone other than Magnadyne Corporation or its authorized agents or where the warning seal on the product is broken or the power and or plugs are detached from the unit Magnadyne Corporation or any of its authorized agents will not assume any labor costs for the removal and reinstallation of any product found to be defective or the cost of transportation to Magnadyne Corporation or its authorized agents such cost are the sole responsibility of the purchaser This warranty does not cover the cabinet appearance items or accessories used in con nection with this product or any damage to recording or recording tape or any damage to the products resulting from improper installation alteration accident misuse abuse or acts of nature MAGNADYNE CORPORATION OR ITS AUTHORIZED AGENTS SHALL NOT BE LIABLE TO ANYONE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES OR CLAIMS EXCEPT THOSE ACCORDED BY LAW NO EXPRESS
28. ations that you have set earlier will appear in the history Find Coordinate Use Latitude and Longitude coordinates to select a destination My Favorites You can select a location that you have already saved as a Favorite to be your destination 30 NAV ox E5O O E g a AVIN Ca z oso SF Find POI t Find J My Favorites Find Address O ii United States United States i All states n p ind Adc Ep Find Find POI x 1 7 m sertVia vw 43 additions E Wr My Favorites Plan Mode GPS Navigation Operation M4 LCD Only continued Making a Detour Avoid Parts of the Route Detour 1 Touch the Second Upcoming Route Event area 2 Use the and buttons at the bottom of the screen to find the part of the route to avoid Touch and highlight part of the route to avoid c 2nd 0 5 mi Glenn Curtiss St 3 Press the Avoid button 4 Select your preference on how to avoid the route segment Once your preference is selected the map appears and the route is automatically calculated and you can start navigating Saved Search Criteria Detour 1 Touch the Detour button 2 Select where you want to detour your route by selecting from the Search Criteria Once you have selected your detour the screen will switch to the map menu with a cursor over you d
29. bility whatsoever for accidents and or injuries resulting from failure to observe these precautions or safety instructions C UT ES e FCC REGULATIONS STATE THAT ANY UNAUTHORIZED CHANGES OR MODIFICATIONS TO THIS EQUIPMENT MAY VOID THE USER S AUTHORITY TO OPERATE IT TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION e TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING INTERFERENCE USE ONLY THE RECOMMENDED ACCESSORIES Any harsh impacts may damage the liquid crystal panel Usage temperature range 32 F to 104 F When the temperature is very cold or very hot the image may not appear clearly or may move slowly Also movement of the image may seem to be out of synchronization or the image quality may decline in such environments Note that this is not a malfunction or problem e Sudden changes in the temperature inside the vehicle such as those which occur immediately after the vehicle s air conditioner or heater has been turned on may cause the inside of the liquid crystal panel to cloud over due to water vapor or it may cause condensation droplets of water to form and as a result the panel may not work properly Do not use the unit while these symptoms are evident Instead leave the unit standing for about an hour and then resume or start use e f the screen of this unit is dirty wipe the dirt off with
30. e Since the M3 LCD does not have the navigation feature the source mode icons on the screen will appear in different positions than illustrated System Setup System Setup provides special settings to fine tune the user experience Select the Setup icon on the second screen of the Homepage The System Setup screen will appear Select the icon corresponding to the setting you want to change Use the adjust ment buttons on the screen to make changes Language The default setting is English and can not be change Press to save and return to Homepage Setting the Clock Time 1 Press the Time Zone button first 2 Use the 4 or w buttons to find your time zone 3 Select and highlight your time zone 4 Press when your time zone has been selected the unit will return to the Homepage 5 Select the Setup icon again to finish setting the clock Source Screen a eb AV IN1 AV IN2 Month Day Year Hour Min Vie Sie Sir 01 05 0 adhe din din din La System Setup Continued Setting the Clock Time Continued 6 Press the button to adjust the Year Month Day Hour and Min Minutes 7 Select the correct or indicator 8 The clock has and military time hour settings 12 hour is the default setting 9 Press when finished making adjustment and to return to the Homepage Radio Setup Press either 4 or gt
31. e Homepage screen Touch the Disc button to enter the disc operation screen Music Disc Track Selection Touch the screen to reveal the disc controls __ Home Press the 14 button to select a lower track mg Press the P button to select a higher track Tracks can also be selected by using the remote control Press the track selection number button that corresponds to the track you want to play For example If you want to play track 8 press button 8 Track 8 will start playing and 8 will appear in the display If you want to play track 12 press button 10 fol lowed immediately by button 2 Track 12 will start playing and 12 will appear in the display Pausing a Music Disc Touch the screen to reveal the disc controls cm Te HOME Press the PII button to pause the disc Press it c o wee ss again to resume play 144 15 Music Disc Operation continued Stopping a Music Disc Touch the screen to reveal the disc controls Press the Bl button to stop the disc To resume play press the Pll button Press the Bl button 2 times then press the Pll button and the disc will start playing from the beginning Repeating a Music Disc Track The unit s default setting is to repeat the entire disc To repeat a music disc track 1 Touch the screen to reveal the disc controls 2 Press the in lower right hand corner of the screen to reveal the secondary disc contr
32. er appear in the display The channel will now be displayed on the preset button Hold SIR BAND 3 TO program additional channels tune them in using the CH lower channel or CH higher channel button Press and hold any of the other five channel recall buttons until you see the Preset Number appear in the display CHO40 CH The channel will now be displayed on the 80 mu 5 preset button y 4 Additional channels can also be programmed in the different preset bands SIR1 SIR2 and SIR 3 Press the SIR BAND button to access the different preset bands Press to return Hands to the main satellite radio screen CHO40 Note Each band can program 6 channels so 18 satellite channels can be programmed in the radio s memory Recalling Preset Channel 1 Press the PRESET button to access the Preset Channel menu SONG TITLE Bleeding love ARTISTICOMPOSER Leona Lewis Most Wutchuwanted CATEGORY NAME CH CH SIR BAND CH LIST CATEGORY PRESET 41 Satellite Radio Operation Option Continued Recalling Preset Channel continued 2 To recall a preset channel press and release the preset number displaying the desired channel number on the button SIR BAND Note Additional channels can also be recalled in the different preset bands SIR1 SIR2 and SIR 3 Press the SIR BAND button to access the different preset bands Skipping a Channel 1 Press the MENU button SON
33. etour Accommodation ATMs mn Shopping M Restaurant to aS By pass Road GPS Navigation Operation M4 LCD Only continued Saved Search Criteria Detour Continued 3 Touch the Insert Via button and a yellow flag will appear on the map indicating the detour route has been calculated and you can start navigating Note To delete this detour touch the yellow detour flag until a cursor shows up on urser Remove Via button t your detour will disappear Direct Selection Detour 1 Zoom the map so the part of the route you want to detour is visible on the screen Touch the part of the route you want to detour until a red flashing cursor appears on the screen 2 Touch the Detour button 3 Touch the By pass Road button 4 Select your preference on how to avoid the route segment The map appears and the route is then automatically calculated and you can start navigating Note To delete this detour touch the Detour but ton and select the Delete Avoids button and your detour will disappear 32 Delete Avoids Bypass Road c WEE QUEE E ET GPS Navigation Operation M4 LCD Only continued Route Menu Touch the Route icon to save load and edit your routes JS Settings Route Menu 4 5 6 Simulate 9 8 7 1 Route Information Contains data estimated 7 Simulate You can run a demonstration of the arrival route length time left distance left
34. f the navigation system Touch the Settings icon in the Navigation Menu screen Settings Menu 1 of 2 e Map Visuals Fine tune the appearance and con tent of the Map screen Route Planning These settings determine how routes will be calculated Navigation Control how the system acts during navigation Sound Adjust the sound of the navigation sys tem Regional These settings allow you to customize the application for your local language measure ment units time and date settings and formats as well as to choose the voice guidance profile you prefer Warnings Enable some useful warnings and disable the touch screen in a moving vehicle with Safety Mode Settings Menu 2 of 2 Press the button to access the second group of settings GPS Sets up the connection to the GPS receiver GPS Enabled Port 3 and Baud Rate 57600 Menu Modify the look and behavior of the Menu screens Tracks Set up automatic Track Log saving and fine tune related settings TMC Not available Device Settings Fine tune device related settings About This screen has no navigation features Press the fm button to return to the Navigation Menu 26 zi Map Visual LAT Navigation mr Ee Map Visual Navigation lt gt GPS Navigation Operation Only continued Map Features 9 6 f ington Ave m o 3 4 W Victoria St 9 8 1 Turn preview that
35. g color to them to or History and the settings you have made in be shown on the map the program 3 POI Points of Interest Creating updating or 9 Geocoding Error No function deleting POIs or POI groups Modify POI vis ibility settings 4 Recent Places List of recent destinations 9 Favorites Renaming or deleting Favorites 6 Saved Search Creating renaming or deleting Saved Search Criteria 34 Bluetooth Operation Selecting the Bluetooth Source Touch the HOME button to activate the Homepage screen Touch the BT button to enter the Bluetooth interface Pairing Bluetooth Devices 1 Enter the Bluetooth interface on M4 LCD M3 LCD 2 Open the mobile phone s setup menu 3 Open the Bluetooth setup program on the mobile phone and activate the Bluetooth feature 4 From you mobile phone scan for available devices 5 Select MAGMALCD and connect to the unit 6 Type the password 0000 7 When phone has been paired Connected will appear in the unit s Bluetooth interface display Note 1 If the mobile phone has been previously paired with the M4 LCD M3 LCD the unit will con nect automatically to the Bluetooth mobile phone when the unit is turned on Note 2 If the Bluetooth mobile phone is already paired with the radio select MAGM4LCD on your phone and touch Connect Making Calls OS 1 Make sure the mobile phone is connected to M4 LCD M3 LCD 2 Using the key pad type in the phone number
36. g the Cursor as the Destination 1 Locate your destination on the map Move and scale the map as needed 2 Touch the location on the map that you want to select as you destination The cursor lt on the screen 3 Press the button 4 The map appears with the selected point in the middle of the screen Touch the Set as Destination button The route is then automatically calculated and you can start navigating Entering an Address or Part of an Address If you know at least a part of the address it is the quickest way to select the destination of the route 1 If in the Map mode touch the Menu button to access the Navigation Menu 2 In the Navigation Menu screen press the Find icon 3 Touch the Find Address button 28 1100 W Mahalo 6 5 De ination m Info E Find 6 1 Find POI Wx My Favorites Plan Mode GPS Navigation Operation M4 LCD Only continued Entering an Address or part of an Address Continued 4 By default the navigation system automati cally selects the country state and city If you need to change any of the previous selection pii touch the screen next to item you want to change 5 Using the keyboard to enter the city Once your City selection has been made complete the Street Name and House Number When the necessary destination information is BE entered press the Done button 3 ELT TITT
37. h the button to reveal the HOME but ton in the upper right hand corner of the screen Label Side Up label side up Inserting the disc will automati cally switch the unit to Disc source screen Note If a disc does not auto load DO NOT FORCE it into the slot as you may already have a disc loaded Slot with the angle key in the card facing up Inserting the SD card will automatically Switch the unit to SD source screen Note If a card does not insert DO NOT FORCE it into the slot flip the card over and try again gently insert the drive into the slot Inserting the USB flash drive will automatically switch the unit to USB source screen Note If a drive does not insert DO NOT FORCE it into the slot flip the drive over and try again 17 MP3 Operation Disc USB and SD Card continued MP3 Interface Screen Folders Files The MP3 media CD SD card or USB flash drive pu contains folder s with files inside the folders These files can include music tracks photos and or videos compatible MPEG1 MPEG2 and DivX files Use the icons at the bottom of the screen to select which type of files you want to access Note If an icon can not be select the unit has determine that kind of files is not accessible Music Photos Video File Selection Method 1 Using the Touch Screen 1 Press the icon representing the type of files you want to access 2 Next select the folder you want to open 3 Press the file
38. he radio operation screen Selecting the AM FM or WB Band Press the Band button repeatedly and select from FM1 FM2 FM3 AM1 AM2 or WB weather band omm me Tuning in a Radio Station Using Seek Press and release either the amp or button and the tuner will seek to the next strong station then it will stop seeking and start playing Manually Tuning in a Radio Station Press and hold either the amp or button until MANUAL appears in the display then release Then press the lt or button until the desired radio station appears in the display cmm mmm eo D I IEEE Cage Memorizing Radio Stations 1 Press the Band button to select either the FM1 FM2 FM3 AM1 or AM radio band 2 Tune in the desired radio station a iii 3 memorize the station press and hold ox 965 So of the six Radio Station Recall buttons until gt NN MHz you hear a beep B 4 The Memorized Radio Station Recall Indicator o IBS xa e um gt will appear in the display and the radio station frequency will appear in the recall button gy 11 Radio Operation continued Automatically Store Radio Stations 1 Press the BAND button to select from the FM1 FM2 FM3 AM1 or AM radio band 2 Press and hold the AS PS button until AS PS appears in the display The tuner will search for the strongest stations and store them into memory The new stations will replace station
39. he track press it again to resume play e Press the MUTE button to disable the audio press it again to restore the audio 4 Press to return to the previous screen 37 Satellite Radio Setup Note The vehicle must be equipped with an optional satellite tuner SXV100 in order to receive a satellite sig nal If the tuner is not activated call 1 866 635 2349 to activate The Tuner ID Number SID is required during the activation process Follow the steps below to access the Tuner ID Number SID Accessing the Tuner ID Number SID 1 Touch the HOME button to activate the Homepage screen Touch the Satellite button to enter the SiriusXM interface 2 Press the MENU button ARTIST COMPOSER CATEGORY NAME CH CH CHLIST CATEGORY PRESET 3 Press the DIRECT CH button DIRECT CH SKIP CH 4 Enter the number 000 then press the ENTER button 5 he Sirius Identification Number SID will appear next to the SONG TITLE header CH CH SIR BAND CH LIST CATEGORY PRESET MENU 38 Satellite Radio Operation Please note that satellite radio signal may be blocked by trees buildings or other obstacles Information display during reception CHECK ANTENNA When an antenna issue exists ACQUIRING SIGNAL When a channel is being tuned in no signal is yet received CHANNEL NOT AVAILABLE A channel without a broadcast has been selected or the receiver may not be activated CALL 1 866 635 2349 TO SUBSCRIBE
40. ld distract the driver and result in an accident causing injury or death Magnadyne Corporation disclaims any and all liability that may result from failure to install and operate in any other manner in which this unit was intended Do not disassemble modify the unit or attempt to repair the product yourself If the product needs to be repaired consult your dealer Do not install the unit in a place exposed to direct sunlight or excessive heat or humidity Avoid places with too much dust or the possibility of water splashing Backing Up Your Vehicle Do not backup your vehicle while looking at the monitor Always look in the direction of your vehicle s motion Use the monitor only as an aid in safety confirmation The actual distance may be different than it appears in the monitor The range of the image in the monitor is limited Always be aware that blind spots may exist and not appear at all times on your monitor The product is intended to assist in safe driving and allows the driver to have a broader field of vision dur ing backup You as the driver are solely responsible for the safe operation of your vehicle and the safety of your passengers and pedestrians and abiding all state and local traffic regulations Do not use any features of this system to the extent it distracts you from safe driving Your first priority while driving should always be the safe operation of your vehicle Magnadyne will not accept any responsi
41. n the unit on Selecting the Disc Source Touch the HOME button to activate the Homepage screen Touch the Disc button to enter the disc operation screen Moving Vehicle Warning If the vehicle is moving this screen will be displayed The sound of the movie disc can be heard Once the vehicle is stopped and the park ing brake is engaged the video will play on the screen Menu Screen 1 Touch the screen to reveal the disc controls 2 Press the spe in lower right hand corner of the screen 2 times to reveal the secondary disc controls 3 Press the Menu button to access the menu screen of the movie disc 4 Touch the menu item you want to select Note Pressing the DVD MENU button on the remote will also access the menu screen Pausing Playing a Movie Disc Touch the screen to activate the movie disc control button panel Press the lIl button to pause the movie disc PAUSE l will appear in the display To resume playing the disc press the II button 20 Label Side Up Cr 00 gt 9 WARNING PLEASE ENGAGE PARKING BRAKE TO WATCH VIDEO gt MUTE Movie Disc Operation continued Stopping a Movie Disc Touch the screen to activate the control button panel Press the Bl button to stop play To resume play press the ll button Press the Bl button 2 times then press the Pll button and the movie disc will start playing from the beginning Selecting a Chapter Touch the screen to ac
42. not control the auxiliary source but can adjust the audio output Refer to the audio device s owners manual for proper playback operation Connecting an Auxiliary Audio Video Device Auxiliary Input 1 AV IN1 Connect an auxiliary audio video device using a 3 5mm jack not Supplied into the socket mounted on the front of the unit Auxiliary Input 2 AV IN2 Connect an auxiliary audio video device to the Auxiliary Input RCA connectors coming from the rear of the unit Selecting the Auxiliary Audio Video Source Touch the HOME button to activate the Homepage screen Press the in the lower right hand corner of the screen to reveal the second Homepage screen Then press the AV IN1 or AV IN2 button to select the Auxiliary Audio Video source Note The unit will not control the auxiliary source but can adjust the sound controls Refer to the audio device s owners manual for proper operation Moving Vehicle Warning If the vehicle is moving this screen will be dis played The sound of the source can be heard Once the vehicle is stopped and the parking brake is engaged the video will play on the screen Menu Screen Press the AUX IN1 or AUX IN2 button to select the auxiliary source The display will indicate which Auxiliary Source has been selected AV1 Front Input AV2 Rear Input 48 AV IN1 65 e WB AV IN1 Setup WARNING PLEASE ENGAGE PARKING BRAKE TO WATCH VIDEO
43. ols 3 Press the and REP 1 will appear in the display The track will now play repeatedly The repeat feature operates in the following sequence Disc Repeat REP ALL gt Track Repeat REP 1 Repeat Off REP OFF gt Track Repeat REPEAT ONE Disc Repeat REP ALL Random Music Disc Track Play Order Press the SHUFFLE button on the remote until RANDOM ON appears on the screen The tracks on the disc will play in random order To cancel this function press the SHUFFLE button until RANDOM OFF appears on the display Preview Music Disc Tracks Press the ASM button on the remote until INTRO ON appears on the screen Each track on the disc will play for 15 seconds To cancel this function press the ASM button until SEQ PLAY appears in the display Ejecting a Music Disc Press the amp button to eject a disc 16 Multimedia HOME 2 35 _ 00 02 45 Multimedia HOME ee 2 35 00 02 45 ME ZEE MEE ME E EE 144 gt gt mute MP3 Operation Disc USB and SD Card General Operations Disc Gently insert the disc into the slot with the SD Card Gently insert the SD card into the USB Flash Drive Flip down the cover and Selecting the SD USB or Disc Source Touch the HOME button to activate the Homepage screen Touch the SD USB or Disc button to enter the corresponding operation screen Revealing the Home Button Touc
44. play 3 Press the TA button and the tuner will search for a station that broadcasts traffic announce ments TA will appear in the display Once a station has been found TP will appear in the display and automatically start playing 12 ws oot MHz coo mas gt MHz joe aa 7 MHz me Radio Operation continued 4 To search for another station that broadcasts traffic announcements press either the or gt button 5 Press the TA button again to cancel this fea ture TA will disappear from the display 6 Press the FUNC button to return to main radio interface screen Note The Traffic Announcement feature Searches for stations that broadcast traffic announcements it does not mean that they are presently broadcasting a traffic announcement Alternative Frequencies AF Not available in the US Scanning for FM Radio Stations According to Program Type PTY 1 Press the BAND button to select from the a FM1 FM2 or radio band o St ih 2 Press the RDS button and TA AF and PTY but MHz tons appear on the left of the display 3 Press the PTY button to display the program oM gt type screen 4 Press the w button to select the desired program type PTY Example News Information Sports etc The selected pro gram type will be highlighted 5 Press the SRCH
45. r C SDR Right Side I 20 CAM1 White Connector C SDL Left Side fea 54 Restart Button The LCD display may fail to function normally due to the vehicle s battery condition and could require restarting the radio s microprocessor if e The vehicle has been jump started from a dead battery condition The vehicle battery becomes very low and is 7 M quick charged e The vehicle battery is removed and replaced 03 19 2011 SAT gt Should any of these conditions occur simply press and release the restart button on the radio front panel using the tip of a ball point pen This will restart the radio s microprocessor After pressing the restart button you should recheck to see if the radio functions normally Replaceable Fuse If the fuse should blow check that the wiring is correct If the wiring is correct replace the fuse with the same amperage rating as the original 15 amp 15 Amp Replaceable Fuse Rear SD Card Holder 1 Open cover 2 Lightly press the SD card into the holder to release the card 3 Reinsert the SD card until it clicks into place 4 Close the cover 5 Select the file from the SD card from the fea ture s setup screen 99 ONE 1 YEAR LIMITED WARRANTY Magnadyne Corporation or its authorized agents will within one year from the date of sale to you repair replace or refund the retail sales price of said product or any part thereof
46. reen during movie playback to reveal the disc controls NO disc setup menu 4 Select the menu item for adjustment ments adjustments System Setup Page e TV System NTSC PAL Auto TV Type 4 3PS 4 3LB 16 9 e Password _ _ e Rating 1 Kid Safe 2G 3 PG 4 PG13 5 PG R 6R 7 NC 17 8 Adult Default Restore Exit Setup Language Setup Page OSD Language English German Spanish French Portuguese or Italian e Audio Lang English German Spanish French Portuguese or Italian Subtitle Lang English German Spanish French Portuguese or Italian e Menu Lang English German Spanish French Portuguese or Italian Exit Setup Audio Setup Page Audio Out SPDIF OFF SPDIF RAW or SPDIF PCM e Key 4 2 0 2 4 b Exit Setup 24 Press the sp in lower right hand corner of the screen to reveal the secondary disc controls 3 Press the 3 button to access the screen movie Use the touch screen to make your adjust Press EXIT SETUP when you are finished with TV SYSTEM TV TYPE PASSWORD RATING DEFAULT EXIT SETUP Video Setup Page Use the screen adjust ment controls in the movie playback disc controls Brightness 12 10 8 6 4 2 0 Contrast 12 10 8 6 4 2 0 e Hue 6 4 2 0 2 4 6 Saturation 12 10 8 6 4 2 0 e Sharpness 8 6 4 2 0 e Exit Setup Speaker Setup Page Do
47. roll through the phone numbers 9 Touch the phone number you want to call 6 Press the 3 green phone to make the call 7 Touch the 6 red phone to end the call 8 Press to return to the previous screen Note If you want to delete a phone IP s number touch the phone number Calls Dialed then press the 3 button Calls Received d s Calls Missed 02 pe Delete a Phone Number 36 Bluetooth Operation continued Phone Book 1 Make sure the mobile phone is connected to the unit on uu 2 Press the 9 button to enter the Bluetooth phone m Bios book interface ppm mem mti 6 1 ma 3 Press the ES button to download the phone numbers QR from your mobile phone CA dE I t e 4 Press the A or button to scroll through the dd ame phone numbers 9 Touch the phone number you want to call 6 Press the 3 green phone to make the call 7 Touch the 6 red phone to end the call 8 Press to return to the previous screen Note If you want to delete a phone number touch the phone number then press the 26 button To delete all the phone numbers press the 9 9 button Bluetooth Music 1 Make sure the mobile device is connected to the unit 2 Press the ed button to enter the Bluetooth music 1311672567 interface 3 Interface control buttons e Press the 14 or PPI button to select previous oe o or next track e Press the Pll button to pause t
48. s that were previously stored in the current banks Note After the new stations are stored into memory the tuner will start playing the first station memorized Scanning Stored Radio Stations 1 Press the BAND button to select from the FM1 FM2 FM3 AM1 or AM2 radio band 2 Press and release the AS PS button and the tuner will scan for preset stations stored in the current banks and pause for 5 seconds at each station When a desired station is reached press the AS PS button again to stop scanning Local Distant Reception To narrow the reception to only local strong sta tion the radio must be switched from distant to local reception To switch from distant to local reception press the LOC button LOC ON will momentarily appear in the display indicating local reception Press the button again and LOC OFF will appear in the display indicating distant reception is activated FM Stereo Mono Reception For weaker FM stereo stations selecting mono reception usually improves reception To switch from stereo to mono reception press the ST button then release The OO icon will disappear from the display Press the button again and will appear in the display indicating the FM reception is in stereo Scanning for FM Radio Stations that Broadcast Traffic Announcements 1 Press the BAND button to select either the FM1 FM2 or radio band 2 Press the RDS button and TA AF and PTY but tons appear on the left of the dis
49. the disc is very dirty use a soft cloth slightly moistened with isopropyl rubbing alcohol Never use solvents such as benzine thinner or conventional record cleaners as they may mar the surface of the disc Note A disc may become somewhat scratched although not enough to make it unusable depending on handling and conditions in the usage environment Preparing New Discs with Rough Spots new disc may have rough edges on its inside and outside edges If a disc with rough edges is used the proper setting will not be performed and the player will not play the disc Therefore remove the rough edges in advance by using a ball point pen or pencil as shown To do this press the side of the pen or pencil against the inside and outside edges of the disc 14 Label side up Do not touch the underside of the disc X V AY OCONEE Wipe the disc from the center toward CX the outside edge Do not bend Rough spots on outside edge Rough spots on inside edge Ball point pen or pencil Music Disc Operation General Operations Label Side Up Gently insert the disc into the slot with the label side up The unit will automatically load the disc Note If a disc does not auto load DO NOT FORCE it into the slot as you may already have a disc loaded Cr ov A Power On Off Press the power button D to turn the unit on Selecting the Disc Source Touch the HOME button to activate th
50. tion Speaker Connections Input and Output Connections Camera Connections Restart Button Replaceable Fuse Rear SD Card Holder Warranty NO 1 CO 1 Ss CO NI NN N OAA co The driver should neither watch the display nor operate the system while driving Watching the display or operating the system will distract the driver from looking ahead of the vehicle and can cause accidents Always stop the vehicle in a safe location and use the parking brake before watching the display or operating the system In some states and countries passengers are also prohibited from watching the display Never install the product in a location where it interferes with your field of vision This unit has a cooling fan to decrease the internal tem perature Do not mount the unit in a place where the cool ing fan on the unit is blocked Blocking these openings will inhibit the cooling of the internal temperature and result in damage to the unit Use the proper power supply This product is designed for operation with a negative grounded 12V DC battery system Never operate this product with other battery systems especially a 24V DC battery system If the prod uct is used with the improper system it may cause a fire or an accident This product must be installed and used in accordance with this manual Any alterations to this product that enables it to be used in any way other than intended or designed cou
51. tivate the movie disc control button panel Press the I button to select a previous chapter Press the PPI button to select a next chapter Fast Forwarding Fast Rewinding Touch the screen to activate the control button panel Press and hold the 144 or BPI button to start the fast forward or fast rewind function speed of 2 times normal speed X 2 FORWARD X 2 or BACKWARD X 2 will appear in the display Press and hold the 144 or button again will increase the speed X 4 X 8 and X 20 Touch the Wl button to resume normal movie disc playback Audio Language 1 Touch the screen to reveal the disc controls 2 Press the spe in lower right hand corner of the screen 2 times to reveal the secondary disc controls 3 Press the button during playback to select the desired audio language setup The audio languages will appear at the top of the screen Title Screen 1 Touch the screen to reveal the disc controls 2 Press the spe in lower right hand corner of the screen 2 times to reveal the secondary disc controls 3 Press the button depending on the char acteristics of the movie disc the title function may be invalid This is not a malfunction lee B lt Lid MUTE 21 Movie Disc Operation continued Subtitle Language Menu 1 Touch the screen to reveal the disc controls 2 Press the sap in lower right hand corner of the screen 2 times to reveal the secondary disc controls 3
52. tup 1 Press the button to reveal more setup features 2 Select the Calibration icon to enter the screen calibration setup interface 3 Press the button 4 Enter 5365 for the password then press the button 5 Touch the center of the following buttons CD 2 3 D in sequence After calibrating the screen the unit saves your settings and exits automatically Logo Setup No user selectable function Audio Setup See Sound Controls section of this manual for more information pud Setup Background Image Press the M button to reveal more setup features Select the Wallpaper icon to enter the wallpa per selection interface 3 Either select a file pre stored in the system or select Scan SD and select an image from the rear SD GPS Card holder 4 Touch to save the image and the unit will automatically return to the main interface Note Please use 800dpi 400dpi amp 24 bit channel BMP format file as Wallpaper if desired HOME SYS Effect IPOD RDS EZ Vertic GPS R mE JU Spin M Do you want to Calibrate m 3 2 duo 0 Z 0 4 emm A o g ap Choice picture bik bmp TTT TELLER TIMP ES Pee ee final green bmp fnalamberbmp NU Eus ORE System Setup Continued Reset L9 1 Press the button to reveal more setup features 2 Type 5365 as the password then press the
53. wnmix LT RT Stereo or VSS Exit Setup Digital Setup Page OP Mode Line Out or RF Remod e Dynamic Range Full 6 8 4 8 2 8 or OFF e Dual Mono Stereo Mono L Mono R or Mix Mono Exit Setup GPS Navigation Operation Only Power On Off Press the power button D to turn the unit on Selecting the GPS Navigation System Direct Selection Press and release the D button from any screens to enter the navigation screen Note Pressing the button again will return the unit to last non GPS screen Homepage Selection Touch the HOME button to activate the Homepage screen Touch the GPS button to enter the navigation screen Navigation Menu The typical way of using the navigation system is to select a destination and start navigating You can select your destination in the following ways Use the selected location on the map the cursor e Enter a full address or a part of an address for example a street name without a house number or the names of two intersecting streets e Enter an address with zip code This way you do not need to select the name of the city and the search for street names might be faster as well Use a coordinate Use a saved location a favorite a POI point of interest or the history of previously set destination 29 GPS Navigation Operation M4 LCD Only continued Navigation Settings You can configure the program settings and modify the behavior o

Magnadyne M4-LCD User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents