Lincoln Food Processor 2806405 User's Manual
Contents
1. operator manual This document includes e Safety Notices e Operating Instructions e Cleaning Instructions e Warranty Statement Revision D P N 2806405 Insta Slice Se ies 15000 Lincoln Foodservice Products LLC 1111 North Hadley Road Fort Wayne Indiana 46804 United Statesof Amenca Technical Support Hotline 800 678 9511 Telephone 260 459 8200 www lincolnsmallwares com WARNING AND SAFETY INFORMATION A WARNING A THIS MACHINE CONTAINS SHARP BLADES AND CAN CAUSE SERIOUS INJURY OR DEATH IF NOT HANDLED PROPERLY ALL OPERATORS OF THIS EQUIPMENT SHOULD READ THIS OPERATION MANUAL BEFORE OPERATING EQUIPMENT IN ORDER TO AVOID DAMAGE TO PEOPLE AND THE APPLIANCE READ AND FOLLOW THE MANUFACTURER S INSTRUCTIONS FOR THE CLEANING OF THIS EQUIPMENT LIMITED TWO 2 YEAR WARRANTY Lincoln Foodservice Products LLC Lincoln warrants to the original purchaser for use in the United States of America that each new item of Redco food preparation utensils other than blades manufactured by it Warranted Product is free of defects in material and workmanship under normal use and conditions The exclusive remedy available under this Limited Warranty is that Lincoln will free of charge but at its option subject to and in accordance with the terms and conditions of this Limited Warranty repair or replace for the original purchaser for use in the United States of America any Warranted Products2. CONT D 3 DO NOT WIPE BLADES OR USE SCRUB PADS IN THIS MACHINE WIPING ACROSS THE SHARP EDGE OF BLADES CAN CAUSE INJURY AND WILL DULL THE BLADES 4 Do not put this machine in a dishwasher or dish machine with soaps detergents or other alkaline chemicals that can harm the machine 5 After cleaning let the machine air dry 6 Lubricate sliding parts with mineral oil or Petro Gel after each use Never use cooking oil as it will cause the machine to become sticky BLADE PUSHER HEAD MAINTENANCE 1 Examine the pusher head fingers If they are nicked or burred smooth the rough edges with a small flat file The spaces between the fingers must be uniform Straighten any bent fingers 2 Check the clearance between the pusher head fingers and the blades Make sure they do not rest on or touch the blades at any point when you move the head through its full travel If there is contact adjustments must be made PUSHER HEAD FINGERS MUST NEVER CONTACT BLADES Adjust Pusher Head Finger spacing by placing a screwdriver between Pusher Head Fingers and gently rotate up down You may also adjust the entire Pusher Head Assembly by loosening the set screws underneath a rotating the guide rod as needed tighten set screws REPLACING BLADE ASSEMBLY 1 Individual blades cannot be replaced Replacement blades are available in assemblies only 2 Loosen the two thumbscrews on the top of the machine 3 Push the top of the blade assembly from the b
3. BLE OF CONTENTS Warming and Safety MOMIE se a EE EE E E EA EEEE 2 Limited Waranty ol abe AB ae annees GE Fade EEE ee Dec EEEE A en mois 2 Ope an NS ACO Ee aa EPEE 3 ear ACON NAC EEEE 3 Blade Replacement INSTUICTONS rocno ses EEEREN aan l WSE Ki 4 Pals E SR SR E E earnaewnnens 6 Exploded View DFAWINOES es ori eera ani A EEE APOS en tant nib A Pair e kIT iraa 7 2 InstaSlice Operator Manual A CAUTION A Blades are sharp and can cause injury Check machine before using Be sure machine is clean Check for broken nicked or dull blades and if found replace blade assembly Check to ensure that the pusher head sits down completely on the rubber bumpers Lubricate if necessary using a light coating of mineral oil Petrol Gel or food grade lubricant DO NOT LUBRICATE WITH COOKING OIL AS IT WILL BECOME STICKY PRIOR TO USING YOUR EQUIPMENT IT IS IMPORTANT TO CLEAN THE UNIT CAUTION WASH NEW BLADES WITH WARM SOAPY WATER AND RINSE THOROUGHLY TO REMOVE THE THIN PROTECTIVE OIL FILM OPERATING INSTRUCTIONS STOP OVER A TABLE EDGE TO HOLD THE MACHINE IN PLACE 4 CAUTION PLACE SLICER ON A TABLE OR COUNTER POSITION THE INSTASLICE TABLE 1 Before each use always check for proper blade tightness and unit cleanliness Check for broken nicked or dull blades and if found replace blade assembly 2 This unit should be used to slice soft vegetables such as tomatoes mushrooms strawberries etc Hard foods such as onions potatoes lemon
4. ack towards the front and lift out Replace in the opposite manner and tighten the two thumbscrews 4 Dispose of used blade assemblies properly 1 CAUTION KEEP THE SHARP BLADE EDGES AWAY FROM HANDS WHEN HANDLING THE MACHINE 4 InstaSlice Operator Manual BLADE TROUBLESHOOTING IF THE MACHINE NO LONGER SLICES TOMATOES CLEANLY OR WITHOUT DAMAGE TO THE TOMATO THE BLADES COULD BE DULL AND BE IN NEED OF REPLACEMENT BROKEN BENT OR NICKED BLADES MUST BE REPLACED IMMEDIATELY Fingers are misaligned _ __ Readjustingrs Fades are dull Replace blade assembly as needed PREVENTIVE MAINTENANCE 1 Clean machine after each use 2 Use for intended purpose 3 Change blades regularly based on usage InstaSlice Operator Manual 5 SPARE PARTS B 879068 Knob Blade Assembly 1 4 scalloped blade Blade Assembly 3 16 scalloped blade Blade Assembly 3 8 scalloped blade Blade Assembly 7 32 straight blade Blade Assembly 1 4 straight blade Blade Assembly 3 16 straight blade Blade Assembly 3 8 straight blade Pusher Head Assembly complete 7 32 F Pusher Head Assembly complete 1 4 Pusher Head Assembly complete 3 16 amp 3 8 1 sm07 8 GuideRogong OSS o sos Base 6 InstaSlice Operator Manual EXPLODED VIEW DRAWING InstaSlice Operator Manual A Enodis LA CERTIFIED SEEMCE AND PARTS
5. or part thereof that proves to be defective with the same or a similar item or part it is returned to Lincoln in accordance with the procedure set out on the warranty card This Limited Warranty applies only to original parts of Warranted Products sold for use in the United States of America and does not apply to any Warranted Products located outside the United States of America regardless of where sold or to any item or part thereof that has been subjected to accident casualty alteration misuse or abuse or if the date of manufacture is altered or removed THIS LIMITED WARRANTY DOES NOT APPLY TO BLADES WHICH ARE SOLD COMPLETELY WITHOUT WARRANTY OR GUARANTEE OF ANY KIND EXPRESSED OR IMPLIED THE OBLIGATION OF LINCOLN IS LIMITED TO THE ABOVE AND EXCEPT AS EXPRESSLY STATED HEREIN LINCOLN MAKES NO GUARANTEES OR WARRANTIES EXPRESSED OR IMPLIED INCLUDING WITHOUT LIMITATION WARRANTIES OF FITNESS OR MERCHANTABILITY WITH RESPECT TO WARRANTED PRODUCTS LINCOLN SHALL NOT BE LIABLE FOR SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND NO ONE IS AUTHORIZED TO MAKE ANY GUARANTEES OR WARRANTIES EXPRESSED OR IMPLIED ON BEHALF OF LINCOLN SOME STATES DO NOT ALLOW LIMITATIONS OF IMPLIED WARRANTIES OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTLY DAMAGES IN CONNECTION WITH THE SALE OF CONSUMER PRODUCTS CONSEQUENTLY IF YOU ARE A CONSUMER AS THAT TERM IS LEGALLY DEFINED THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU TA
6. s etc will cause blade breakage Use a Tomato King Scooper to remove the stem scar of the tomato For best results the tomatoes should be clean and wet before slicing them in the machine Spray the plastic platform and blades with water to reduce friction and repeat as needed during use 4 Place the tomato top down on the platform of the slicer against the pusher head Place one hand on the pusher head handle and one hand on the knob on top of the slicer With a quick push of the pusher head push the tomato through the blades catching the slices into a pan placed at the end of the slicer 5 Repeat this process until you have prepared enough food for your daily needs 6 Rinse blades immediately Failure to do so will shorten the life of the blades CLEANING INSTRUCTIONS To insure optimal performance of the equipment clean the machine after every use Food acids corrode the cutting blades ruining the cutting edges and reducing the cutting blade life Refer to the illustration for additional assistance in reviewing the following cleaning instructions A CAUTION BLADES ARE SHARP AND CAN CAUSE INJURY NEVER USE MACHINE UNLESS ALL FOUR RUBBER FEET ARE IN PLACE 1 Place the pusher head in its most OPEN position by retracting the handle 2 Rinse or spray off the machine thoroughly with HOT water You may want to immerse the complete machine in warm soapy water first InstaSlice Operator Manual 3 CLEANING INSTRUCTIONS
Download Pdf Manuals
Related Search