Lightolier IS:CTC User's Manual
Contents
1. READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE INSTALLING LUMINAIRE INSTRUCTION SHEET NO This luminaire is intended for installation in accordance with the National Electrical Code and local regulations To assure full compliance with local codes and regulations check with your local electrical inspector before IS 7 CTC installation To prevent electric shock turn off electricity at fuse box before proceeding C Retain these instructions for maintenance reference A0504 Page 1 of 1 INSTRUCTION SHEET FOR ASSEMBLY AND INSTALLATION OF 9 12 amp 16 PENDALYTE SERIES CLOSE TO CEILING MOUNT Note This instruction sheet covers several luminaire styles Powerhead assembly lamp type and reflector style may vary slightly from that shown although installation is the same CANOPY INSTALLATION fig 1 1 Attach POWERHEAD ASSEMBLY to CANOPY using 8 32 SCREWS 2 Using appropriate slots in CROSSBAR secure CROSSBAR to outlet box using OUTLET BOX SCREWS provided with outlet box 3 Make electrical connections black POWERHEAD lead to hot black supply lead white POWERHEAD lead to neutral white supply lead Green POWERHEAD lead is ground wire and must be connected to grounding terminal or ground lead inside outlet box Use WIRE NUTS local hardware item Push supply leads into outlet box Note Refer to POWERHEAD instruction sheet for detailed wiring information Thread STUDS into outer holes on CROSSBAR Attach CANOPY POWERHEAD ASEMBLY2. by placing over STUDS and securing with CAP SCREWS CROSSBAR gt CAUTION MAKE CERTAIN WIRES ARE NOT PINCHED BETWEEN PARTS POWERHEAD ASSEMBLY CAUTION MAXIMUM WATTAGE AS MARKED ON LUMINAIRE MUST NOT BE EXCEEDED Fig 1 631 Airport Road Fall River MA 02720
Download Pdf Manuals
Related Search