Lightolier IS_ALETTA-IND User's Manual
Contents
1. 679 8131 e Fax 508 674 4710 We reserve the right to change details of design materials and finish www lightolier com 2008 Philips Group C1208 Lightolier is a Philips group brand PHILIPS2. LICH TOLIER Lighting Systems IS ALETTA IND Page 1 of 3 Instruction Sheet for Assembly and Installation of Aletta Individual Fixtures READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE PROCEEDING RETAIN THESE INSTRUCTIONS FOR MAINTENANCE REFERENCE This fixture is intended for installation in accordance with the National Electrical Code and local regulations To assure full compliance with local codes and regulations check with your local electrical inspector before installation To prevent electrical shock turn off electricity at electrical panel before proceeding DO NOT INSTALL THIS SYSTEM IN A WET OR DAMP LOCATION DO NOT ENERGIZE ANYTHING OTHER THAN THE FIXTURES IN THE SYSTEM CONTRACTOR IS RESPONSIBLE FOR ADEQUATELY REINFORCING CEILING TO SUPPORT FIXTURE WEIGHT 631 Airport Road Fall River MA 02720 508 679 8131 e Fax 508 674 4710 We reserve the right to change details of design materials and finish www lightolier com 2008 Philips Group C1208 Lightolier is a Philips group brand PHILIPS LICH TOLIER Lighting Systems IS ALETTA IND Page 2 of 3 Instruction Sheet for Assembly and Installation of Aletta Individual Fixtures 1 Place fixture in desired location and support ends with hang wires from building structure above Fig 1 2 Remove ACCESS PLATE on top of fixture to gain access to splice compartment remove a 7 8 knock out from ACCESS PLATE and pull necessary wires out of fixture Fig 1 3 Provide p
3. ower feed wires to fixture per NEC amp local codes and re install ACCESS PLATE Fig 2 4 Install designated lamps and test NOTE Depending on lamp configuration installer may need to swing down a side diffuser to simplify lamp installation Fig 3 5 Install GRID CLIPS at opposite corners of fixture Fig 2 hee ACCESS PLATE 27 GRID CLIP Figure 1 Figure 2 Snap in one side diffuser Snap in second side diffuser Snap in the center diffuser i i O a Figure 3 631 Airport Road Fall River MA 02720 508 679 8131 e Fax 508 674 4710 We reserve the right to change details of design materials and finish www lightolier com 2008 Philips Group C1208 Lightolier is a Philips group brand PHILIPS LICH TOLIER Lighting Systems IS ALETTA IND Page 3 of 3 Instruction Sheet for Assembly and Installation of Aletta Individual Fixtures 6 To install the center diffuser hook one side of diffuser from 2 SUPPORT PINS and depress and hold the opposite end PUSH PINS rotate diffuser until level then release PUSH PINS to secure center diffuser Fig 4 6 a PUSH AV SUPPORT PINS SIDE DIFFUSER S On Figure 6 Assure the center diffuser is properly inserted into the lower pins Secure the center diffuser with the provided safety lanyard 631 Airport Road Fall River MA 02720 508
Download Pdf Manuals
Related Search