Lightolier IS:406BLS User's Manual
Contents
1. TRACK INSTALLATION INTO TRACK fig 2 1 2 3 4 Turn off power to TRACK Insert POWER STEM into track The STEM LEVER must be on the same side as the track bead See fig 2 Rotate suspension stem 90 clockwise using STEM LEVER STEM LEVER should be parallel to TRACK To remove rotate SUSPENSION STEM 90 counterclockwise using STEM LEVER Ep m Snes J LIGHTOLIER 2p spemremscouray2. READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE INSTALLING FIXTURE INSTRUCTION SHEET NO This fixture is intended for installation in accordance with the National Electrical Code and local regulations To assure full compliance with local codes and regulations check with your local electrical inspector before IS m 406 B LS installation To prevent electric shock turn off electricity at fuse box before proceeding m Retain these instructions for maintenance reference A0105 Page 1 of 1 INSTRUCTIONS FOR 6 5 PENDALYTE SERIES TRACK MOUNT TO LYTESPAN TRACK SYSTEM SUSPENSION KITS FOR USE WITH LYTESPAN TRACK SYSTEMS ONLY CAUTION MAXIMUM WATTAGE AS MARKED ON LUMINAIRE MUST NOT BE EXCEEDED 4 SCREWS BRASS CONTACT NICKEL CONTACT CONTACT SCREWS SET SCREW De BUSHING O a POWERCORD Fig 1 POWER STEM INSTALLATION fig 1 1 Slide STEM and BUSHING over POWERCORD Align end of POWERCORD with top of BUSHING tighten SET SCREW to secure POWERCORD Twist stripped ends of POWERCORD wires an attach using CONTACT SCREWS attach hot black POWERCORD lead to long BRASS CONTACT attach neutral white POWERCORD lead to short NICKEL CONTACT attach POWERCORD ground lead green to BODY with green CONTACT SCREW Slide STEM up over contacts and secure to BODY using 4 SCREWS NOTE Not for use with ProSpec track WARNING TO PREVENT ELECTRIC SHOCK TURN OFF POWER TO
Download Pdf Manuals
Related Search