Lightolier IS:404SK User's Manual
Contents
1. Slide CABLE through CABLE COUPLER as shown Attach CANOPY by placing over 1 4 20 SCREW and securing with CABLE COUPLER CAUTION MAKE CERTAIN WIRES ARE NOT PINCHED BETWEEN PARTS POWERHEAD INSTALLATION fig 2 Attach CABLE ADJUSTER to MOUNT PLATE with PANEL NUT Note On 9 unit MOUNT PLATE must be oriented correctly a BLUNGER to clear DOOR SCREW head see fig 2 Pass POWERCORD through relief bushing hole in MOUNT CABLE ADJUSTER PLATE While supporting POWERHEAD ASSEMBLY wire luminaire using RELIEF BUSHING WIRE NUTS local hardware item black luminaire lead to hot S 8 32 SCREWS black POWERCORD lead white luminaire lead to neutral MOUNT PLATE ie white POWERCORD lead Attach luminaire ground wire s green and or bare to green ground wire from POWERCORD Height adjustment to raise luminaire push excess POWERCORD down into POWERHEAD Make certain CABLE does not WRENUTS zsa ________ PANEL NUT interfere with internal wiring or components both POWERCORD and CABLE may be cut inside POWERHEAD Remove DOOR SCREW and pull DOOR away from POWERHEAD CABLE is inserted into CABLE ADJUSTER Raise luminaire by providing slack in CABLE and pushing through CABLE ADJUSTER Lower BOWEAHEAD luminaire by depressing PLUNGER ASSEMBLY Secure POWERCORD to MOUNT PLATE with STRAIN RELIEF Attach MOUNT PLATE to POWERHEAD with 8 32 SCREWS CAUTION MAXIMUM WATTAGE AS MARKED ON LUMINAIRE MUST NOT BE EXCEEDED Fig 2 LIcCsH4TOLIER ere ont2. ane 02720 CABLE COUPLER POWERCORD
3. READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE INSTALLING LUMINAIRE INSTRUCTION SHEET NO This luminaire is intended for installation in accordance with the National Electrical Code and local regulations To assure full compliance with local codes and regulations check with your local electrical inspector before IS m 404S K installation To prevent electric shock turn off electricity at fuse box before proceeding m Retain these instructions for maintenance reference Page 1 INSTRUCTION SHEET FOR ASSEMBLY AND INSTALLATION OF 3 9 12 amp 16 PENDALYTE SERIES WITH CORD AND CABLE SRESER OUTLET BOX Note This instruction sheet covers several luminaire styles SCREWS Powerhead assembly lamp type and reflector style may vary slightly from that shown although installation is the same CANOPY INSTALLATION fig 1 1 Thread 1 4 20 SCREW through CROSSBAR as shown CANOPY 2 Using appropriate slots in CROSSBAR secure CROSSBAR to outlet box using OUTLET BOX SCREWS provided with outlet box Make electrical connections black POWERCORD lead to hot RELIEF BUSHING black supply lead white POWERCORD lead to neutral white supply lead Green POWERCORD lead is ground wire and must be connected to grounding terminal or ground lead inside outlet box Use WIRE NUTS local hardware item Push supply leads into outlet box Note Refer to POWERHEAD instruction sheet for detailed wiring information Secure POWERCORD into CANOPY with RELIEF BUSHING
Download Pdf Manuals
Related Search