LG E2051C User's Manual
Contents
1. O panel See p 11 ASSEMBLING AND PREPARING 5 Button Description MENU Accesses the main menus See p 15 Left First Button OSD LOCKED This function allows you to lock the current control settings so UNLOCKED that they cannot be inadvertently changed Press and hold the Left First Button for several seconds The message OSD LOCKED should appear You can unlock the OSD controls at any time by pushing the Left First Button for several seconds The message OSD UNLOCKED should appear SUPER RESOLUTION Use this button to enter the SUPER RESOLUTION menu For more information See p 17 DUAL Use this button to enter the DUAL menu For more information See p 18 AUTO Press the AUTO button on the MONITOR SETUP OSD menu to automatically adjust the screen Only supported in Analog Mode The best display mode E1951S E1951T 1366 x 768 E1951C E2051S E2051T 1600 x 900 E2051C E2251S E2251T 1920 x 1080 E2251C E2251VR E2251VQ E2351TC E2351T E2351VR E2351VQ VOLUME Only HDMI mode E2251VR E2351VR E2251VQ E2351VQ Adjust the volume of the Monitor See p 17 INPUT You can choose the input signal e When two input signals are at least are connected you can select the input signal D SUB DVI D HDMI you want e When only one signal is connected it is automatically detected The default setting is D SUB EXIT Exit the OSD2. Do you see a OSD LOCKED message on the screen Do you see OSD LOCKED when e You can secure the current control settings so that they cannot be you push Left First Button inadvertently changed You can unlock the OSD controls at any time by pushing the left first button for several seconds the message OSD UNLOCKED will appear Display image is incorrect Display Position is incorrect e Press the AUTO button to automatically adjust your display image to the ideal setting On the screen background vertical e Press the AUTO button to automatically adjust your display image to bars or stripes are visible the ideal setting Any horizontal noise appearingin e Press the AUTO button to automatically adjust your display image to any image or characters are not the ideal setting clearly portrayed e Check Control Panel gt Display gt Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting Set the color setting higher than 24 bits true color N CAUTION e Check Control Panel gt Display gt Settings and see if the frequency or the resolution were changed If yes readjust the video card to the recommend resolution e If the recommended resolution optimal resolution is not selected letters may be blurred and the screen may be dimmed truncated or biased Make sure to select the recommend resolution e The setting method can differ by c
3. Q NOTE The Kensington security system is optional You can obtain it from most electronics stores 3 Remove the 2 screws and detach the Stand Body from the monitor ASSEMBLING AND PREPARING Mounting on a wall For proper ventilation allow a clearance of 10 cm on each side and from the wall Detailed instructions are available from your dealer see the optional Tilt Wall Mounting Bracket Installation and Setup Guide If intend to mount the Monitor to a wall an optional third party wall mount must be purchased When you install the Monitor using the wall mounting interface optional parts attach it carefully so it will not fall 1 Please use screws and a wall mount interface in accordance with VESA Standards 2 Ifyou use screws longer than standard the monitor might be damaged internally 3 If you use improper screws the product might be damaged and drop from mounted position In this case LG Electronics is not responsible for it 4 VESA compatible only with respect to screw mounting interface dimensions and mounting screw specifications 5 Please use a VESA standard as below e 784 8 mm 30 9 inch and under Wall Mount Pad Thickness 2 6 mm Screw 4 0 mm x Pitch 0 7 mm x Length 10 mm e 787 4 mm 31 0 inch and above Please use VESA standard wall mount pad 9 and screws Mod
4. LG Life s Good OWNER S MANUAL LED LCD MONITOR Please read this manual carefully before operating your set and retain it for future reference LED LCD MONITOR MODELS E1951S EIQSIT E1951C E225IVR E2251VQ E2051S E2051T E2051C E2351VR E2351VQ E2251S E2251T E2251C E2351T E2351TC www lg com HS79N3 2 TABLE OF CONTENTS CONTENTS m 6 3 ASSEMBLING AND 21 SPECIFICATIONS T PREPARING 26 Preset Modes Resolution 3 Unpacking 27 HDMI Video Timing 4 Parts and buttons 27 Indicator 6 Setting up the Monitor 6 Assembling the Stand Body and Base 28 PROPER POSTURE 7 Mounting on a table 8 Detaching the Stand Base and the 28 Proper posture for using the Monitor Stand Body 9 Mounting on a wall 29 LICENSES 11 USING THE MONITOR 11 Connecting to a PC 11 D SUB connection 12 DVI D connection 13 HDMI connection 14 CUSTOMIZING SETTINGS 14 Accessing The Main Menus 15 Customizing Settings 15 MENU Settings 16 SUPER ENERGY SAVING Settings 17 SUPER RESOLUTION Settings 17 VOLUME Settings Only supported in HDMI 18 DUAL MONITOR Settings 18 DUAL WEB Settings 19 TROUBLESHOOTING ASSEMBLING AND PREPARING 3 ASSEMBLING AND PREPARING Unpacking m zZ A I n I Check your product box for the following items If there are any missing accessories contact the local dealer where you purchased your product The illustrations in this manual may dif
5. ASSEMBLING AND PREPARING Mounting on a table 1 Lift and tilt the Monitor into its upright position on a table Leave a 10 cm minimum space from the wall for proper ventilation 2 Connect the AC DC Adapter and Power Cord to a wall outlet a pem CAUTION Disconnect the power cord first and then move or install the Monitor Otherwise electric shock may occur 7 A WARNING When you adjust the angle do not hold the bottom of the Monitor frame as shown on the following illustration as it may injure your fingers Do not touch or press the screen when adjusting the angle of the monitor a 0 NOTE Tilt from 15 to 5 degrees up or down to adjust the angle of the Monitor to suit your view m zZ A I n I 8 ASSEMBLING AND PREPARING Using the Kensington security system Detaching the Stand Base and the m The Kensington security system connector is Stand Body A located at the back of the Monitor For more 7 information of installation and using refer to the 1 Place the Monitor with the screen side down on I manual supplied with the Kensington security a flat and cushioned surface system or visit http www kensington com Connect the Kensington security system cable between the Monitor and a table 2 Using a coin turn the screw in the Stand Base counterclockwise Detach the Stand Base from the Stand Body
6. button The available DUAL WEB settings are described below Menu Description DUAL WEB ON Automatically arranges snaps web pages to each half of the screen OFF Turns the DUAL WEB feature off Q NOTE e When the monitor is in power saving mode pressing any button and then selecting DUAL the monitor will return to normal operation e The Dual Package program provided with the monitor should be installed on the PC to use the DUAL MONITOR and DUAL WEB functions TROUBLESHOOTING 19 TROUBLESHOOTING m Check the following before calling for service T No image appears Is the power cord of the display e Check and see if the power cord is connected properly to the power connected outlet Press the Power button If the display is in power saving mode try moving the mouse or pressing any key on the keyboard to bring up the screen e Try to turn on the PC Do you see an OUT OF RANGE e This message appears when the signal from the PC video card is message on the screen out of horizontal or vertical frequency range of the display See the Specifications section of this manual and configure your display again Do you see a CHECK SIGNAL e This message appears when the signal cable between your PC and CABLE message on the screen your display is not connected Check the signal cable and try again Is the power indicator light on Is the power indicator blink
7. Environmental Operating Temperature 10 C to 35 C conditions Operating Humidity 20 to 80 non Condensing Storage Temperature 10 C to 60 C Storage Humidity 5 to 90 non Condensing Stand Base Attached Detached O Power cord Wall outlet type Product specifications shown above may be changed without prior notice due to upgrade of product functions SPECIFICATIONS 23 E2251S E2251T E225IC Display Screen Type 54 686 cm 21 53 inch Flat Panel Active matrix TFT LCD Anti Glare coating Visible diagonal size 54 686 cm Pixel Pitch 0 248 mm x 0 248 mm Pixel Pitch Sync Input Horizontal Frequency 30 kHz to 83 kHz Automatic Vertical Frequency 56 Hz to 75 Hz Automatic Input Form E2251S E2251C Separate Sync E2251T Separate Sync Digital Video Input Signal Input E2251S E2251C 15 pin D SUB Connector E2251T 15 pin D SUB Connector DVI D Connector Digital Input Form E2251S E2251C RGB Analog 0 7 Vp p 75 ohm E2251T RGB Analog 0 7 Vp p 75 ohm Digital Resolution Max E2251S E2251C D SUB Analog 1920 x 1080 60 Hz E2251T D SUB Analog DVI D Digital 1920 x 1080 60 Hz Recommend VESA 1920 x 1080 60 Hz Plug amp Play E2251S E2251C DDC 2B Analog E2251T DDC 2B Analog Digital Power Consumption On Mode 26 W Typ Sleep Mode lt 0 5 W Off Mode lt 0 5 W Power Input 19 V 1 3 A A
8. 47 01 cm 18 51 inch Flat Panel Active matrix TFT LCD Anti Glare coating Visible diagonal size 47 01 cm Pixel Pitch 0 3 mm x 0 3 mm Pixel Pitch Sync Input Horizontal Frequency 30 kHz to 61 kHz Automatic Vertical Frequency 56 Hz to 75 Hz Automatic Input Form E1951S E1951C Separate Sync E1951T Separate Sync Digital Video Input Signal Input E1951S E1951C 15 pin D SUB Connector E1951T 15 pin D SUB Connector DVI D Connector Digital Input Form E1951S E1951C RGB Analog 0 7 Vp p 75 ohm E1951T RGB Analog 0 7 Vp p 75 ohm Digital Resolution Max E1951S E1951C D SUB Analog 1366 x 768 60 Hz E1951T D SUB Analog DVI D Digital 1366 x 768 60 Hz Recommend VESA 1366 x 768 60 Hz Plug amp Play E1951S E1951C DDC 2B Analog E1951T DDC 2B Analog Digital Power Consumption On Mode 20 W Typ Sleep Mode lt 0 5 W Off Mode lt 0 5 W Power Input 19 V 1 3A AC DC Adapter Type ADS 40SG 19 3 19025G manufactured by HONOR Electronic Dimensions With Stand 44 94 cm x 17 26 cm x 35 6 cm Width x Height x Depth Without Stand 44 94 cm x 3 35 cm x 27 9 cm Weight 2kg Tilt Range 5 to 15 Environmental Operating Temperature 10 C to 35 C conditions Operating Humidity 20 to 80 non Condensing Storage Temperature 10 C to 60 C Storage Humidity 5 to 90 non Condensing Stand Base Attached Detached O Power cord Wall outlet type Product spec
9. by using broadcast video signal LED Saving means how much power can be saved using a WLED Panel instead of CCFL panel SUPER SAVING means how much power can be saved using the SUPER ENERGY SAVING function CUSTOMIZING SETTINGS 17 SUPER RESOLUTION Settings SUPER RESOLUTION 1 Press any button on the front of the Monitor to display Ej Fe 5 the MONITOR SETUP OSD menu mi NORMAL LOW MEDIUM HIGH 2 Press the SUPER RESOLUTION button to display the options in the OSD menu 3 Set the options by pressing lt or gt buttons Select EXIT to leave the OSD menu To return to the upper menu or set other menu items use the up arrow button The available SUPER RESOLUTION settings are described below Menu Description NORMAL Select this option for everyday viewing SUPER RESOLUTION is turned off in this mode LOW Select this option for viewing natural and soft images It is suitable for still images or video with little movement MEDIUM Select this option for eye comforting viewing between LOW and HIGH modes It is suitable for UCC and SD videos HIGH Select this option for viewing vivid and clear images It is suitable for high resolution videos and games Q NOTE e SR SUPER RESOLUTION will help remove noise from video VOLUME Settings Only supported in HDMI VOLUME 1 Press any button on the front of the Monitor to display the MONITOR SETUP O
10. energy efficiency
11. 1 50 60 576P 31 25 50 720P 37 50 50 720P 45 00 60 1080i 28 12 50 1080i 33 75 60 1080P 56 25 50 1080P 67 50 60 Indicator Mode LED Color On Mode Blue Sleep Mode Blinking Blue Off Mode Off 28 PROPER POSTURE PROPER POSTURE Proper posture for using the Monitor m Z A n T Adjust the Monitor and your posture to allow you to view images at the optimal viewing angle Adjust the location of the Monitor to avoid it reflecting light Place your hands gently on the keyboard keeping your arms bent at the elbows and horizontally outright LICENSES 29 LICENSES Supported licenses may differ by model For more information of the licenses visit www lg com m Z A T n I i LD mil HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC HIGH DEFINITION MULTIMEDIA INTERFACE Life s Good Make sure to read the Safety Precautions before using the product Keep the Owner s Manual CD in an accessible place for future reference The model and serial number of the SET is located on the back and one side of the SET Record it below should you ever need service MODEL SERIAL ENERGY STAR is a set of power saving guidelines issued by the U S Environmental Protection Agency EPA As an ENERGY STAR Partner LGE U S A lnc has determined that this onust product meets the ENERGY STAR guidelines for
12. C DC Adapter Type ADS 40SG 19 3 19025G manufactured by HONOR Electronic Dimensions With Stand 51 75 cm x 18 65 cm x 39 4 cm Width x Height x Depth Without Stand 51 75 cm x 3 35 cm x 31 7 cm Weight 2 477 kg Tilt Range 5 to 15 Environmental Operating Temperature 10 C to 35 C conditions Operating Humidity 20 to 80 non Condensing Storage Temperature 10 C to 60 C Storage Humidity 5 to 90 non Condensing Stand Base Attached Detached O Power cord Wall outlet type Product specifications shown above may be changed without prior notice due to upgrade of product functions m zZ A I n I m zZ A n ag 24 SPECIFICATIONS E2251VR E2251vQ Display Screen Type 54 686 cm 21 53 inch Flat Panel Active matrix TFT LCD Anti Glare coating Visible diagonal size 54 686 cm Pixel Pitch 0 248 mm x 0 248 mm Pixel Pitch Sync Input Horizontal Frequency 30 kHz to 83 kHz Automatic Vertical Frequency 56 Hz to 75 Hz D SUB DVI D 56 Hz to 61 Hz HDMI Input Form Separate Sync Digital HDMI Video Input Signal Input 15 pin D SUB Connector DVI D Connector Digital HDMI TYPE A Connector Input Form RGB Analog 0 7 Vp p 75 ohm Digital HDMI Resolution Max D SUB Analog 1920 x 1080 60 Hz DVI D Digital HDMI Digital 1920 x 1080 60 Hz Recommend VESA 1920 x 1080 60 Hz Plug amp Play DDC 2B Analog Digital HDMI Power Consumption On Mode 26 W Ty
13. E Switch to full screen mode according to input image signal o o o ORIGINAL Change the input image signal ratio to original This function works only if input resolution is lower than Monitor ratio 16 9 COLOR TEMP PRESET Select the screen color e WARM Set the screen to warm color temperature more red e MEDIUM Set the screen to medium color temperature Oo Oo Oo e COOL Set the screen to cool color temperature More blue USER e RED Set your own red color levels e GREEN Set your own green color levels e BLUE Set your own blue color levels CONTRAST 0 Oo Oo Adjusts the contrast of the screen BLACK LEVEL You can set the offset level If you select HIGH the screen will be Only supported x x o bright and if you select LOW the screen will be dark in HDMI mode e Offset As the criteria for video signal it is the darkest screen the monitor can show LANGUAGE Oo Oo oO Changes the menu language RTC If you set ON you enable the Response Time Control function and Only supported in o o o reduce the afterimage of the screen E2251VQ E2351VQ If you set OFF you disable the Response Time Control function model and operate at panel response time SUPER ENERGY Change the SUPER ENERGY SAVING function See p 16 o oO o SAVING FACTORY RESET Oo 6 Oo Returns the monitor to original factory settings except language e Analog D SUB Analog signal input e Digital DVI D Digital signal input e HDMI HDMI Digital sig
14. On Screen Display Power Button Turns the power on or off Power Indicator The power indicator stays blue if the display is running properly On Mode If the display is in Sleep Mode the power indicator blinks blue m zZ A I n I 6 ASSEMBLING AND PREPARING Setting up the Monitor Assembling the Stand Body and Base m zZ A E n ag 1 Place the Monitor with the screen side down on a flat and cushioned surface 2 Attach the Stand Body from the Monitor Insert the two Lockers of the Stand Body right into the groove of the Monitor head and secure them by pressing the left and right bottom sides Locker 3 Secure the Stand Body the monitor using 2 screws A WARNING e If you do not fasten the screws the monitor may fall which may result in damage to the product 4 Check the direction of the Stand Base and assemble it with the Stand Body Using a coin turn the screw clockwise to secure the Stand Base lt lt L a Stand Base d hee e This illustration depicts the general type of connection Your monitor may differ from the items shown in the picture e Do not carry the product upside down holding only the stand base The product may fall and get damaged or injure your foot e Applying excessive force when fastening screws may cause damage to the monitor Damage caused in this way will not be covered by the product warranty
15. SD menu 2 Press the VOLUME button to display the options in the OSD menu t a g EXIT Adjust the VOLUME by pressing lt or gt buttons Select EXIT to leave the OSD menu To return to the upper menu or set other menu items use the up arrow button HSIION3 18 CUSTOMIZING SETTINGS DUAL MONITOR Settings DUAL PACKAGE DUAL MONITOR itz 1 Press any button on the front of the Monitor to display the MONITOR SETUP OSD menu m zZ A n lt x Ta i EXTENDED CLONE Press the DUAL button to display the options in the OSD menu Set the options by pressing V and then lt and gt buttons Select EXIT to leave the OSD menu To return to the upper menu or set other menu items use the up arrow button The available DUAL MONITOR settings are described below Menu Description DUAL MONITOR OFF Turns the DUAL MONITOR feature off EXTENDED Extends the desktop of the primary monitor to the secondary monitor CLONE Shows the same video on both monitors DUAL WEB Setti ngs DUAL PACKAGE DUAL WEB Rg ieil 1 Press any button on the front of the Monitor to display the MONITOR SETUP OSD menu Press the DUAL button to display the options in the OSD menu Set the options by pressing V and then lt and gt buttons Select EXIT to leave the OSD menu To return to the upper menu or set other menu items use the up arrow
16. ee p 17 Sets the external input F aD NOTE Different menu items are enabled depending on the type of input signal and model Menu SUPER DUAL AUTO VOLUME INPUT EXIT RESOLUTION E1951S E2051S E2251S E1951C E2051C E2251C o X o 9 x o E1951T E2051T E2251T E2351T E2351TC o x o o X 9 o E2251VR E2351VR Analog Digital O O O O X O O E2251VR E2351VR HDMI O O O X O O O E2251VQ E2351VQ Analog Digital O X O O X O O E2251VQ E2351VQ HDMI O X O X O O O CUSTOMIZING SETTINGS 15 Customizing Settings MENU Settings 1 Press any button on the front of the Monitor to display the BRIGHTNESS lt p 100 MONITOR SETUP OSD menu ahi taal Sa EE Lor COLOR TEMP lt USER 2 Press the MENU button to display the options in the OSD PRESET ln er e RED lt a gt 50 menu GREEN m gt 50 BLUE 1 p5 3 Set the options by pressing the lt or gt or Y buttons o CONTRAST A aT BLACK LEVEL lt ow gt Select EXIT to leave the OSD menu l a LANGUAGE a ENGISH gt To return to the upper menu or set other menu items use the a RTC lt oN gt up arrow 4 button fi SUPER ENEYGY SAVING gt gt FACTORY RESET lt NO gt The available MENU settings are described below Menu Analog Digital HDMI Description BRIGHTNESS 0 oO 0 Adjusts the brightness of the screen ORIGINAL RATIO WID
17. el E1951S E1951C E2051S E2051C E2251S E2251C E1951T E2251VR E2051T E2351VR E22511 E2251VQ 23511 E2351VQ E2351TC VESA A x B 75 x75 Screw Size Number of screws Wall mount bracket optional e VESA AxB m Z A I n T m zZ A n a5 10 z A N CAUTION ASSEMBLING AND PREPARING Disconnect the power cord first before moving or installing the Monitor Otherwise electric shock may occur If you install the Monitor on a ceiling or slanted wall it may fall and result in severe injury Use only an authorized LG wall mount and contact a local dealer or qualified personnel Do not over tighten the screws as this may cause damage to the Monitor and void your warranty Use only screws and wall mounts that meet the VESA standard Any damages or injuries by misuse or using an improper accessory are not covered by the warranty note Only use screws that are listed on the VESA standard screw specifications The wall mount kit will include an installation manual and necessary parts The wall mount bracket is optional You can obtain additional accessories from your local dealer The length of screws may differ depending on the wall mount Be sure to use the proper length For more information refer to the instructions supplied with the wall mount USING THE MONITOR SET 11 USING THE MONITOR Connectin
18. fer from the actual product and accessories CD Owner s Manual D SUB Cable DVI D Cable This signal cable may be attached In some countries this to this product before shipping out accessory may not be provided Power Cord AC DC Adapter EES Screws for Assembly Stand Body 2EA Stand Base A N CAUTION e Do not use any unapproved accessories to ensure the safety and product life span e Any damages or injuries by using unapproved accessories are not covered by the warranty Q NOTE e The accessories supplied with your product may vary depending on the model e Product specifications or contents in this manual may be changed without prior notice due to upgrade of product functions e User should use shielded signal interface cables RGB cable DVI D cable with ferrite cores to maintain standard compliance for the product 4 ASSEMBLING AND PREPARING Parts and buttons m zZ A n I Power Indicator e Lighting On Turned on e Lighting Off Turned off ee De AG C Power Button Button CUSTOMIZING SETTINGS on page 14 N E1951S E2051S E2251S E2251VR E2251VQ E1951C E2051C E2251C E2351VR E2351VQ pea HDMI Q ose A ap g O DC IN DVI D D SUB BRAA E1951T E2051T Eze E2351T E2351TC DC IN DVI D D SUB BRAA
19. g to a PC m zZ A I n I E2251VR E2351VR E2251VQ E2351VQ e Your Monitor supports Plug amp Play Plug amp Play APC recognizes a connected HDMI device that users connect to a PC and turn on without device configuration or user oa 4 intervention DVI D gt D SUB connection Transmits analog video from your PC to the Monitor Connect the PC and the Monitor with the supplied D sub 15 pin signal cable as shown in the following illustrations E1I951S E20515 E22515 EI95IC EZ051C E2251C DC IN BAMA mesic D SUB Q NOTE e Apple Adapter An adapter may be needed for Apple computers This adapter can be purchased from Apple DC IN BRA E1951 E2051T E42517 E2351T E235 TC m zZ A n ag 12 USING THE MONITOR SET DVI D connection Transmits the digital video signal from your PC to the Monitor Connect the PC and the Monitor set with the DVI D cable as shown the following illustrations E1951T E2ZO51T E22 51T E2Z3517 E23511TC DC IN D SUB BRA E2251VR E2351VR E2251VQ E2351VQ DVI OUT PC N CAUTION e Connect the signal input cable and tig
20. hten it by turning the screws clockwise Do not press the screen with your finger for a long time as this may result in temporary distortion on the screen Avoid displaying a fixed image on the screen for a long period of time to prevent image burn Use a screensaver if possible USING THE MONITOR SET 13 HDMI connection Transmits the digital video and audio signals from your PC or A V to the Monitor Connect the PC or A V and the Monitor with the HDMI cable as shown in the following illustrations When the HDMI cable is connected you can listen to the sound through headphones earphones or an external speaker E2251VR E2351VR E2251VQ E2351VQ HDMI Q DC IN BRAA re ED HDMI OUT HDMI OUT PC A V z T NOTE e When you want to use two PC in our Monitor please connect the signal cable D SUB DVI D HDMI respectively in Monitor e If you turn the Monitor on while it is cold the screen may flicker This is normal e Some red green or blue spots may appear on the screen This is normal e Sound output is available only in HDMI input mode The quality of the sound may be reduced depending on the performance of headphones earphones or external speaker Self Image Setting Function Press the power button on the front panel to turn the power on When monitor power is t
21. ifications shown above may be changed without prior notice due to upgrade of product functions m zZ A I n I m zZ A n I 22 SPECIFICATIONS E2051S E2051T E2051C Display Screen Type 50 805 cm 20 0 inch Flat Panel Active matrix TFT LCD Anti Glare coating Visible diagonal size 50 805 cm Pixel Pitch 0 2766 mm x 0 2766 mm Pixel Pitch Sync Input Horizontal Frequency 30 kHz to 83 kHz Automatic Vertical Frequency 56 Hz to 75 Hz Automatic Input Form E2051S E2051C Separate Sync E2051T Separate Sync Digital Video Input Signal Input E2051S E2051C 15 pin D SUB Connector E2051T 15 pin D SUB Connector DVI D Connector Digital Input Form E2051S E2051C RGB Analog 0 7 Vp p 75 ohm E2051T RGB Analog 0 7 Vp p 75 ohm Digital Resolution Max E2051S E2051C D SUB Analog 1600 x 900 60 Hz E2051T D SUB Analog DVI D Digital 1600 x 900 60 Hz Recommend VESA 1600 x 900 60 Hz Plug amp Play E2051S E2051C DDC 2B Analog E2051T DDC 2B Analog Digital Power Consumption On Mode 21 W Typ Sleep Mode lt 0 5 W Off Mode lt 0 5 W Power Input 19V 1 3A AC DC Adapter Type ADS 40SG 19 3 19025G manufactured by HONOR Electronic Dimensions With Stand 48 28 cm x 17 42 cm x 37 5 cm Width x Height x Depth Without Stand 48 28 cm x 3 35 cm x 29 7 cm Weight 2 197 kg Tilt Range 5 to 15
22. ital HDMI TYPE A Connector Input Form E2351T E2351TC RGB Analog 0 7 Vp p 75 ohm Digital E2351VR E2351VQ RGB Analog 0 7 Vp p 75 ohm Digital HDMI Resolution Max E2351T E2351TC D SUB Analog DVI D Digital 1920 x 1080 60 Hz E2351VR E2351VQ D SUB Analog 1920 x 1080 60 Hz DVI D Digital HDMI Digital 1920 x 1080 60 Hz Recommend VESA 1920 x 1080 60 Hz Plug amp Play E2351T E2351TC DDC 2B Analog Digital E2351VR E2351VQ DDC 2B Analog Digital HDMI Power Consumption On Mode 30 W Typ Sleep Mode lt 0 5 W Off Mode lt 0 5 W Power Input 19 V I 1 7A AC DC Adapter Type ADS 40SG 19 3 19032G manufactured by HONOR Electronic Dimensions With Stand 54 92 cm x 18 65 cm x 41 2 cm Width x Height x Depth Without Stand 54 92 cm x 3 35 cm x 33 5 cm Weight 2 724 kg Tilt Range 5 to 15 Environmental Operating Temperature 10 C to 35 C conditions Operating Humidity 20 to 80 non Condensing Storage Temperature 10 C to 60 C Storage Humidity 5 to 90 non Condensing Stand Base Attached Detached O Power cord Wall outlet type Product specifications shown above may be changed without prior notice due to upgrade of product functions m Z A I n T m zZ A 7 a5 26 SPECIFICATIONS Preset Modes Resolution E1951S E1951T E1951C Display Modes Resolution Ho
23. nal input m zZ A I n I 16 CUSTOMIZING SETTINGS SUPER ENERGY SAVING Settings SUPER ENERGY SAVING 1 Press any button on the front of the Monitor to display the MONITOR SETUP OSD menu m zZ A n I 2 Press the MENU button to display the options in the OSD Menu TOTAL POWER REDUCTION 20W 3 Select SUPER ENERGY SAVING by pressing the Y button TOTAL C02 REDUCTION 16g 4 Enter to SUPER ENERGY SAVING by pressing the gt button 5 Set the options by pressing lt or gt buttons Select EXIT to leave the OSD menu To return to the upper menu or set other menu items use the up arrow 4 button The available SUPER ENERGY SAVING settings are described below Menu Description ON Enables SUPER ENERGY SAVING OFF Disables SUPER ENERGY SAVING RESET Resets the values of total energy consumption reduction and CO2 emission reduction estimates e TOTAL POWER REDUCTION How much power is saved while using the monitor e TOTAL CO2 REDUCTION Estimated CO2 not used by activating the Super Energy Saving function e SAVING DATA W h 470 mm 18 5 inch 508 mm 20 inch 546 mm 21 5 inch 584 mm 23 inch SUPER SAVING 3 W h 3 W h 4 W h 5 W h LED SAVING 3 W h 18 W h 15 W h 12 W h Saving Data depends on the Panel So those values should be different from each panel and panel vendor LG calculated these values
24. omputer and O S Operating System and resolution mentioned above may not be supported by the video card performance In this case please ask to the computer or the video card manufacturer 20 TROUBLESHOOTING m z Q Display image is incorrect The screen color is mono or e Check if the signal cable is properly connected and use a screwdriver abnormal to fasten if necessary e Make sure the video card is properly inserted in the slot e Set the color setting higher than 24 bits true color at Control Panel gt Settings The screen blinks e Check if the screen is set to interlace mode and if yes change it to the recommend resolution Do you see an Unrecognized monitor Plug amp Play VESA DDC monitor found message Have you installed the display e A Windows display driver is included on the CD Or you can also driver download the driver from our web site http www lg com e Make sure to check if the video card supports Plug amp Play function The Audio function is not working Picture OK amp No sound e Check whether volume is 0 e Check sound muted e HDMI cable installed properly e Head phone cable installed properly e Check sound format Not support to compressed sound format SPECIFICATIONS 21 SPECIFICATIONS E1I9515 EI9SIT EI9SIC Display Screen Type
25. p Sleep Mode lt 0 5 W Off Mode lt 0 5 W Power Input 19 V 1 7 A AC DC Adapter Type ADS 40SG 19 3 19032G manufactured by HONOR Electronic Dimensions With Stand 51 75 cm x 18 65 cm x 39 4 cm Width x Height x Depth Without Stand 51 75 cm x 3 35 cm x 31 7 cm Weight 2 477 kg Tilt Range 5 to 15 Environmental Operating Temperature 10 C to 35 C conditions Operating Humidity 20 to 80 non Condensing Storage Temperature 10 C to 60 C Storage Humidity 5 to 90 non Condensing Stand Base Attached Detached O Power cord Wall outlet type Product specifications shown above may be changed without prior notice due to upgrade of product functions SPECIFICATIONS 25 E2351T E2351TC E2351VR E2351VQ Display Screen Type 58 42 cm 23 inch Flat Panel Active matrix TFT LCD Anti Glare coating Visible diagonal size 58 42 cm Pixel Pitch 0 265 mm x 0 265 mm Pixel Pitch Sync Input Horizontal Frequency 30 kHz to 83 kHz Automatic Vertical Frequency E2351T E2351TC 56 Hz to 75 Hz Automatic E2351VR E2351VQ 56 Hz to 75 Hz D SUB DVI D 56 Hz to 61 Hz HDMI Input Form E2351T E2351TC Separate Sync Digital E2351VR E2351VQ Separate Sync Digital HDMI Video Input Signal Input E2351T E2351TC 15 pin D SUB Connector DVI D Connector Digital E2351VR E2351VQ 15 pin D SUB Connector DVI D Connector Dig
26. rizontal Frequency kHz Vertical Frequency Hz 720 x 400 31 468 70 08 640 x 480 31 469 59 94 640 x 480 37 500 15 800 x 600 37 879 60 317 800 x 600 46 875 75 832 x 624 49 725 74 55 1024 x 768 48 363 60 1024 x 768 60 023 75 029 1366 x 768 47 712 59 790 Recommend Mode E2051S E2051T E2051C Display Modes Resolution Horizontal Frequency kHz Vertical Frequency Hz 720 x 400 31 468 70 08 640 x 480 31 469 59 94 640 x 480 37 500 75 800 x 600 37 879 60 317 800 x 600 46 875 T9 1024 x 768 48 363 60 1024 x 768 60 023 75 029 1152 x 864 67 500 75 1600 x 900 60 000 60 Recommend Mode E2251S E2251T E2251C E2251VR E2251VQ E2351T E2351TC E2351VR E2351VQ Display Modes Resolution Horizontal Frequency kHz Vertical Frequency Hz 720 x 400 31 468 70 08 640 x 480 31 469 59 94 640 x 480 37 500 75 e 800 x 600 37 879 60 317 800 x 600 46 875 75 e 1024 x 768 48 363 60 1024 x 768 60 023 75 029 1152 x 864 67 500 75 e 1280 x 1024 63 981 60 020 1280 x 1024 79 976 75 025 e 1680 x 1050 65 290 59 954 1920 x 1080 67 500 60 Recommend Mode e HDMI PC mode is not supported SPECIFICATIONS 27 HDMI Video Timing m E2251VR E2251VQ E2351VR E2351VQ 5 e Display Modes Resolution Horizontal Frequency kHz Vertical Frequency Hz Ta 480P 3
27. urned on the Self Image Setting Function is executed automatically Only supported in Analog Mode note e Self Image Setting Function This function provides the user with optimal display settings When the user connects the monitor for the first time this function automatically adjusts the display to optimal settings for individual input signals Only supported in Analog Mode e AUTO Function When you encounter problems such as blurry screen blurred letters screen flicker or tilted screen while using the device or after changing screen resolution press the AUTO function button to improve resolution Only supported in Analog Mode m zZ A I n I 14 CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS Accessing The Main Menus 1 Press any button on the front of the Monitor to display the MONITOR SETUP OSD menu m zZ A n I 2 Press the desired menu item 3 Change the value of the menu item by pressing the buttons on the front of the Monitor To return to the upper menu or set other menu items use the up arrow button 4 Select EXIT to leave the OSD menu LO Monitor set Buttons MENU See p 15 AUTO See p 5 EXIT Sets the screen options Optimizes the resolution Exits the OSD menu MONITOR SETUP FoPFea Bd MENU SUPER DUAL AUTO VOLUME INPUT EXIT RESOLUTION SUPER RESOLUTION DUAL See p 18 VOLUME See p 17 INPUT S
Download Pdf Manuals
Related Search