Home

LG 26LH1DC3 User's Manual

1. Menu Item Function Value Range Default Value Brief Description of Function and Comments 035 COMPPORT EN 0 1 1 Set to 1 to enable HDMI Set to O to disable 038 YPrPb EN 0 1 1 Set to 1 to enable display panel Component 1 input jacks 039 REAR AUX EN 0 1 1 Set to 1 to enable display panel Video 1 input jack 040 AUTO CAMPORT 0 1 1 Set to 1 to automatically switch to Camport 046 STRT AUX SRCE 1 7 255 255 Sets the starting AUX source 047 AUX STATUS 0 1 0 Set to 1 for M PI AUX source to be reported as a channel number instead of Channel 0 053 DIS CH TIME 0 1 0 Set to 1 to disable Channel Time display 069 EN CH T COL 0 1 1 Set to 1 to enable custom color for the Channel Time display 070 FOR CH TIME O 7 2 Chooses custom foreground color for the Channel Time display 071 BCK CH TIME O 7 2 Chooses custom background color for the Channel Time display 073 CH NOT AVBLE 0 1 0 If set to 1 and channel override is 0 NOT AVAILABLE message is displayed when directly accessing a channel not in the favorite channel list 075 REVERT CH 0 1 0 If set to 1 and loss of M PI communication occurs TV tunes to Start Channel 078 UPN MSB 0 255 0 User programmable number most significant byte 079 UPN MSB 1 0 255 0 User programmable number most significant byte 1 080 UPN MSB 2 0 255 0 User programmable number most significant byte 2 081 UPN LSB 0 255 0 U
2. 1 t Antenna or CATV e 26LH1DC3 4 5 Master TV Setup Ferrite Core TDK ZCAT 2035 0930 Ta a a n i a THE CLONE HAS CONTROL OF THE TV THE CLONE IS VERSION THE TV IS VERSION THE SW IS REVISION CLONE CLOCK XX XX TV CLOCK XX XX Warning Do not use LT2002 PRESS ANY KEY TO CONTINUE DISCONNECT CLONE WHEN DONE QuickSet Il Programmer LT2002 if a Lodge Net PPV card is installed in TV or clone programmer device will be damaged Clone Programmer Master 26LH1DC3 4 5 Note1 It is assumed that the 26LH1DC3 4 5 is connected to a signal source the source selected is Antenna RF In the signal is from an Analog channel not a digital channel all equipment is connected to power and turned on and the LT2002 Clone Programmer main menu THE CLONE HAS CONTROL OF THE TV menu is displayed on the TV screen the clone programmer LED is blinking the required heart beat pattern see above and next page Note2 Once the clone is connected do not touch the unit or otherwise disturb it or the MPI connections Any disturbance while the clone is operating may disrupt the master setup transfer or copying etc Before you begin cloning e The Master 26LH1DC3 4 5 should be connected to a good stable signal from an over the air antenna or cable service Analog channel and connected to power See above e e Teaching and
3. 117 FACT DEFAULT O Normal 1 Loads factory default presets of all above settings INSTALLER MENU Detailed Descriptions of Installer Menu Items 000 INSTALLER SEQUENCE Specifies entry sequence to the Installer Menu O 9876 1 4321 2 1478 3 3698 001 POWER MANAGE Power Management Determines hours of no activity before automatic shutoff The POWER MANAGE function is for saving energy If set to 0 Power Manage is Off Settings range from O 7 with 1 7 representing the hours that the TV will remain On unless there has been activity from either the control panel or remote control 002 AC ON AC Power Switchable If set to 1 allows the 26LH1DC3 4 5 to turn On just by applying AC power Pressing the On button is not necessary This is desirable if the 26LH1DC3 4 5 is plugged into a cable box or a power outlet controlled by a wall switch Use ADJ Left Right arrow to choose 0 or 1 where O is the default is Off and 1 is On Note f set to 1 On the 26LH1DC3 4 5 does not respond to On Off commands from either the remote or the display control panel and the SLEEP TIMER is also nonfunctional 003 BAND AFC Band Automatic Frequency Control Selects the tuning band There are 4 possible settings for this option O Broadcast 2 HRC 1 CATV 3 IRC If some channels were not found by Auto Program select the appropriate Band setting here and add the channels
4. 2 NETWORK 1234567 Changing a Channel s ICON on Master TV 1 With Channel Up Down select the channel you want to change the Icon for With the Right or Left AD button select the letter Il on the channel ID display With the Up or Down AD button select the desired ICON you want to appear to identify the channel If you know the ICON number enter the number followed by Enter Select Note If no Icon is available leave at or select the default blank icon display Proceed with Changing Adding Labels orgo to the next channel Icon MENU remote control from the PPV provider To Do Channel Editing Labeling proceed as follows 1 Enter 26LH1DC3 4 5 Installer menu 2 After the installer menu appears press 2 5 4 This enters the channel label edit mode Add your channel icons and channel labels in this menu see below You can do this more than once Label Changing Adding Channel Labels on Master TV 1 2 Channel Up Down to select the desired channel Press the Right or Left ADJ arrow repeatedly until the numbers 1 to 7 show up The number shows the position of the character that can be changed Number 1 is the first character number 2 the second character and so on With the Up or Down ADJ arrow select the desired character Proceed to the next number
5. Did TV Turn On Press POWER or ON OFF or VOLUME UP DOWN or MUTE key on Remote Respond 1 Bad TV 1 Bad TV XIGNiddV a 73 APPENDIX TV OPERATING CHECK Press the On Off key on the front panel The On Off key is always operational Did you get a response 2 Go to Installer menu by pressing MENU until the TV stops responding Did TV stop responding or continue to respond 2 XIGN4dddV a responding Continued to respond TV is not in Commercial Mode Call Technical Support for Assistance 74 TV is in Commercial Mode GLOSSARY OF TERMS A list of definitions for some of the words found in this guide 75 OHM RF CABLE The wire that comes from an off air antenna or cable service provider The end looks like a hex shaped nut with a wire sticking through the middle It screws onto the Antenna Cable threaded jack on the back of the 26LH1DC3 4 5 300 TO 75 OHM ADAPTER A small device that connects a two wire 300o0hm antenna to a 75 ohm RF jack They are usually about an inch long with two screws on one end and a round opening with a wire sticking out on the other end ANALOG TELEVISION Standard television broadcasting format in 4 3 picture aspect ratio A V CABLES Audio Video cables Three cables bunched together right audio red left audio white and video yellow A V cables are used for stereo playback of vide
6. Press the MENU button and then use the ADJ A or V button to highlight the Setup menu and press the OK Enter button Mme S Chio Menu Language English Menu Language ancy Use the ADJ A or Y button to highlight Menu Language and press the OK Enter button 3 Use the ADJ A or Y button to highlight and set the Menu Language English Espa ol or Francais 4 When finished press MENU repeatedly to remove the menus TOYLNOD JOVNONVI 8 ANNOS a Tme Chip V Chip Menu Language J English Menu Transparency Espa ol Set ID Frangais 11 20 PM Sep 11 2006 menu 47 SOUND amp LANGUAGE CONTROL TOYLNOD JDVNONVI B ANNOS a 48 Menu Transparency Settings Menu Transparency sets the background transparency of the menu Press the MENU button and then use the ADJ A or Y ae Time button to highlight the Setup menu and press the OK x von un Enter button 7 Menu Language English ii Menu Language Use the ADJ A or Y button to highlight Menu Transparency Semi Opaque ia SetiD Menu Transparency and press the OK Enter button 3 Use the ADJ A or Y button to highlight and set the Menu Transparency Opaque Semi Opaque Semi Trans Transparent When finished press MENU repeatedly to remove the y l Opaque menus Menu Transparency Sei UVE Transparent Sep 11 2006 AY Select ens Back Set ID Use this function to specify a set ID n
7. ANSI NFPA 70 provides information with regard to proper grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding conductors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode Example of Grounding According to National Electrical Code Instructions Ground Clamp Antenna Lead in Wire Antenna Discharge Unit NEC Section 810 20 Grounding Conductor NEC Section 810 21 Electric Service Equipment Ground Clamps Power Service Grounding i Electrode System NEC Art 250 Part H NEC National Electrical Code CONTENTS PARENTAL CONTROL RATINGS WARNING CAUTION 000 00000 000 2 SAFETY INSTRUCTIONS 0 000 0 0 4 CONTENTS 0 00 00 0 cc cece eee 5 PREPARATION IACCESSONIOS 5025 occa std eer oto ee ene ee 6 Front Panel Information 7 Back Panel Information 00085 8 VESA Wall Mounting ee 9 EXTERNAL EQUIPMENT SETUP Antenna or Cable Connection 10 HD Receiver Setup eee T DVD Setuipis n A Nets UR Sd teal 14 VOR Setup 0h Oat Seta LEI EN a 16 Other A V Source Setup 0 0 00 08 18 Digital Audio Output 0 18 PC SQtUP c csidccaciet car atetennrmena cutee tlsanbends 19
8. one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Rey UT BN PORTABLE CART WARNING 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or object have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built up static charges Article 810 of the National Electrical Code U S A
9. position or use Channel Up Down to go to the next channel 3 To exit the menu when done press MENU Changing Source Labels on Master 1 Press TV AV to select the desired Aux input source Video 1 Component S Video etc Press the Right or Left ADJ arrow repeat edly until the numbers O to 9 show up The number shows the position of the character that can be changed Use the Up or Down AD arrow to select the desired character Press TV AV for the next Aux source or proceed with Changing Icon or Changing Adding Labels Installer Remote Control Key Functions for Master TV Channel Editing Labeling Menu CHANNEL Up Down Tunes in the next channel in scan Left Right Arrows Select the item to change If I is shown the ICON can be changed If a number is shown it indicates the position of the character that can be changed Up Down Arrows Select the ICON or the character to be displayed if known e 0 9 Use to enter the index number of the ICON OK Enter Select Changes the ICON after the number has been entered TV AV Changes the Aux input source for labeling This key is located on the side of the TV front and on Installer remote control e MENU Exits the labeling editing menu PEFERENCE Detailed Information For Making A Master TV IMPORTANT INSTALLER SETUP INFORMATION PLEASE READ THE FOLLOWING To set up a master TV you will nee
10. 7 6 then ENTER to access the Installer s menu To remove the Installer s menu press ENTER again Any changes you make will be stored in nonvolatile memory The menu also disappears automatically LODGING PTC INSTALLER MENU 000 INSTALLER SEQ UPN 000 000 000 000 PTC V1 00 000 FPGA 09F1 The Installer s menu opens with item 000 INSTALLER SEQ 000 Use CPU V1 01 00 the Up Down arrow buttons to sequence through the available menu items Or access an item directly by keying in the line number then pressing MENU For example to access the Sleep Timer option which is item 015 press O 1 5 then MENU To change a setting use the Left Right arrow buttons Or enter a value directly Typical Installer Menu Using the Installer s Menu Items 000 117 are immediately accessible only upon entering the Installer s Menu Their numbers descriptions ranges factory default settings and a place for listing any changes made on site are given below and on the following pages Installer Menu Items 000 through 117 Menu Item Function Value Range Default Value Brief Description of Function and Comments 000 INSTALLER SEQ 0 3 0 Leave default set to 0 001 POWER MANAGE O 7 0 Sets number of hours of no activity before auto shut Off 002 AC ON 0 1 0 Set to 1 to enable auto turn On at power up 003 BAND AFC 0 3 1 Selects Tuning Band O
11. Set Block Hour 12 TVPG Rating MPAA Rating Can English Rating Can French Rating D L Rating Changing PIN Set Block Hour TVPG Rating menu MOVIE amp TV RATINGS TVPG Ratings You can block programs based on the TV program rating Press the MENU button and then use the ADJ A or Y button to highlight the Setup menu and press the OK Enter button Use the ADJ A or Y button to highlight V Chip and press the OK Enter button 3 Enter the 4 digits password Use the ADJ A or Y button to highlight the TVPG Rating and press the OK Enter button O Use the ADJ A V lt P buttons to choose and set up the menu options for TVPG Rating When finished press MENU repeatedly to remove the menus Description of the TV FCC Rating Codes TV FCC Age Categories TV MA Mature audiences only This program may contain mature themes profane language graphic violence and explicit sexual content TV 14 Parents strongly cautioned This program may contain sophisticated themes sexual content strong language and more intense violence TV PG Parental guidance suggested The program may contain infrequent coarse language limited violence some suggestive sexual dialog and situations TV G General audience This contains little or no violence no strong language and little or no sexual dialog or situations TV Y7 Directed for older children Themes and elements in this program may include mild
12. using the Channel List option in the Channel Menu 004 STRT CHANNEL Start Channel If active this function allows you to determine the initial channel number when the 26LH1DC3 4 5 is turned On This feature is useful for an in house information channel since the 26LH1DC3 4 5 would always select that channel when it is turned On Setting this to 255 causes the last channel viewed when the 26LH1DC3 4 5 was turned Off to be the tuned to channel when the 26LH1DC3 4 5 is turned On again 255 Last channel 1 125 Ch X O Aux 126 Map to Channel3 127 Map to Channel 4 Note Item 004 STRT CHANNEL cannot be set to O if item 093 RJP AVAILABLE is set to 1 005 CHAN LOCK Channel Lock CHAN LOCK is ideal if the system must always be on the same channel Changing channels with Channel Up Down or keypad numbers is impossible Channel Lock is inactive if set to O default Generally this feature is used in connection with START CHANNEL Installer item 004 where the start channel may for example be set to 3 or 4 If the start channel is 3 then the 26LH1DC3 4 5 will remain locked on Channel 3 Note For Items 007 008 and 009 For legacy reasons the scale used is 0 63 The PTC software will translate this to the O 100 scale used by the TV To translate a TV volume level to the installer menu value use the following formula Installer Value TV Value x 63 100 Enter only the whole number disregard fraction
13. B als O S VIDEO V DIO Bosen O VIDEO3 L_ 5 o A CAUTION gt Do not connect to both Video and S Video at the same time In the event that you connect both Video and the S Video cables only the S Video will work dNLIS LNIWdINOA IWNYILXI A 17 EXTERNAL EQUIPMENT SETUP OTHER A V SOURCE SETUP 1 How to connect ex TV Model Nilo Connect the VIDEO2 jacks between TV and external equipment Match the jack colors Video yellow Audio Left white and GE a Audio Right red s 5 a g 5 m OU 3 3 z 3 5 S 3 L moan 5 m o e b gt pei 2 How to use Camcorder m Select AV2 input source by using the TV AV button on the remote control m Operate the corresponding external equipment dNLIS LNIWdINOA IWNYILXI a DIGITAL AUDIO OUTPUT a Send the TV s audio to external audio equipment via the Digital Audio Output Optical port 1 How to connect Connect one end of an optical cable to the TV Digital Audio Optical Output port UPDATE 2 Connect the other end of the optical cable to the DIRE AYD OAE BON DYI digital audio optical input on the audio equipment O DIGTAL AUDIO E E R tPA dn pean E E A E AE aa A PCI OUT OPTICAL Set the Digital Output Dolby Digital in the Sound menu gt p 44 See the external audio equipment instruction manual f
14. Broadcast 1 CATV 2 HRC 3 IRC 004 STRT CHANNEL 0 125 126 127 255 255 Channel at turn on Set 255 to return to last channel before power Off 005 CHAN LOCK 07 1 0 If set to 1 cannot tune from current channel 007 STRT VOLUME 0 63 255 255 Sets Volume level at TV turn on Set 255 to retain last volume level 008 MIN VOLUME 0 63 0 Sets minimum allowable volume setting 009 MAX VOLUME 0 63 63 Sets maximum allowable volume setting 010 MUTE DISABLE 0 1 0 Set to 1to disable mute function ou KEY DEFEAT 0 1 1 Set to 1 to disable menu navigation keys on display panel 015 SLEEP TIMER 0 1 1 Set to 1 to enable Sleep Timer 016 EN TIMER 0 1 0 Set to 1 to enable On Off Timers 017 ALARM 0 1 1 Set to 1 to enable Alarm 021 V CHIP 0 1 1 Set to 1 to enable V Chip functions 022 MAX BLK HRS 0 99 12 Sets number of V Chip Parental Control blocking hours 023 CAPTION LOCK 0 1 0 Set to 1 to retain caption setting at power Off 028 CH OVERIDE 0 1 1 If set to O limits direct access to favorite channels 029 OLD OCV 0 1 0 Set to 1 to change M P operation to OCV 030 ACK MASK 0 1 0 If set to 1 changes M P for some OCV boxes 031 POLL RATE 20 169 94 Selects poll rate for M PI 03 TIMING PULSE 186 227 207 Sets baud rate for M PI 034 CAMPORT EN 0 1 1 Set to 1 to enable Video 2 input JAGOW 1VIDYAWWOD a 57 COMMERCIAL MODE AGOW 1VIDYAWWOD i 58 INSTALLER MENU Installer Menu Items 035 through 117
15. Fine Tune Auto Auto Program If you press 0 button auto mode is selected Channel Label Channel List Sie Fine Tune Now auto fine tuned 4 gt adjust enu Bask O Auto Program Channel Label Channel List Signal Strength ESS soll Weak Strong Signal Strength C TOULNOD TANNVHD AL 9NIHDLYM a 29 TIME SETTING ONILLAS AWIL Hl 30 CLOCK SETTING Manual Time Settings Use the ADJ A V lt P buttons to set the year month day hours and minutes Press the MENU button and then use the ADJ A or Y button to highlight the Setup menu and press the OK Enter button 2 Use the ADJ A or Y button to the Time 3 Press the OK Enter button to highlight Clock Manual or Auto will appear on the menu next to clock If manual is selected on the menu use the ADJ A or Y button to highlight Manual and press the OK Enter button Use the ADJ A or Y button to highlight Manual Clock and press the OK Enter button O Use the ADJ A V lt P buttons to set the year month day hours and minutes When finished press MENU repeatedly to remove the menus On Off Timers Setup Set the On Off Timers using the procedures described above Q NOTE gt If you intend to use the On Off Timers it is best to set the clock manually ie oe onio O E Menu Language English Menu Language Auto Manual Clock 4 r Mon pay Time Zon
16. Set to 1 to activate V Chip Parental Control have it available to end user to filter and control or otherwise restrict programming content that can appear Set to O to turn V Chip feature Off not available to user no programming restrictions can be set 022 MAX BLK HRS Maximum Block Hours Sets hours from 0 to 99 for the maximum V Chip Parental Control block hours Default setting is for 12 blocking hours 023 CAPTION LOCK Set to 1 to restore previous caption On Off state after turn Off If set to 0 captions are always Off at turn On Continued from previous page 028 CH OVERIDE Channel Override If set to 1 the user can select channels with either Channel up down or by direct keypad entry If set to O only those channels that are added on the channel list can be selected 029 OLD OCV On Command Video Set to 1 for operation with systems from On Command Corporation 030 ACK MASK M PI Communication Parameter Leave at default setting unless changed by Pay Per View provider When set to 1 changes M P for some OCV boxes 031 POLL RATE M PI Communication Parameter Selects Poll Rate for M PI Leave at default setting unless changed by Pay Per View provider Step size of 16 ms 032 TIMING PULSE M PI Communication Parameter Leave at default setting unless changed by Pay Per View provider Sets baud rate Step size of 4 3 uS 034 CAMPORT EN Camera Port Enable Set to 1 to enable Vid
17. access to rear RGB1 input on display panel Set to 1 to enable RGB1 input for DTV Set to 0 to disable RGB1 input Note The setting above is ignored if Installer item 093 RJP AVAILABLE is set to 1 Then 087 REAR RGB EN above always resets itself to PC 1 regardless of what value appears for item 087 on the Installer menu 088 EN NOISE MUTE Enable Noise Mute If set to 1 audio mutes if no signal is present 090 KEY LOCK If set to 1 display panel keyboard is locked out not available to end user IR receiver remains functional JAGOW 1VIDYAWWOD a 091 YPrPb2 EN Rear Component Video 2 Enable Set to 1 to enable display panel Component 2 input Set to O to disable display panel Component 2 input 092 RGB2 ENABLE Red Green Blue 2 Enable Set to 1 to enable display panel Video 3 input for Composite Video set to 2 to enable for S Video Set to 0 to disable display panel Video 3 input 093 RJP AVAILABLE Set to 1 remote jack pack is available Set to 0 remote jack pack is not available Note This item can not be set to 1 if item 040 AUTO CAMPORT is set to 1 Continued on next page 61 COMMERCIAL MODE AGOW 1VIDYAWWOD A 62 Continued from previous page 094 SAP MENU EN 2nd Audio Program Set to 1 to enable SAP feature if available Set to O to disable SAP feature 096 DEF ASP RATIO Default Aspect Ratio Selects default aspect ratio at power up see settings below Set to 0
18. are not done properly then the cloned 26LH1DC3 4 5 TVs will all have problems For example do not do 2 5 5 Menu more than once or the TV setup will become corrupted If you need to start the procedure over then begin by setting installer item 117 to 001 and pressing Enter to reset the TV to default values in the installer menu You can do 2 5 4 Menu mode more than once but this mode is limited to only editing channel icons and channel labels Refer to the appropriate section in the Manual for other TV features 0 0 0 AGOW 1VIDYAWWOD E 0 0 0 Picture Sound etc Note Digital Font options are available only after a channel search has been run and when the TV is tuned to an active digital channel with digital captions NTER 00 0 0 0 m 0 0 0 n m sag m 4 Q psl im fa 0 0 LT2002 Clone Programmer As the cloning procedure is being performed specific steps need to be done at the indicated times to achieve the desired result Be sure to do each cloning task as indicated If a procedure or step is left out or not performed correctly then the TV setup will be wrong and cloning may not work At each step pay attention to assure the TV screen shows the proper message s when cloning If the message indicated does not appear there is a problem with that step gt oO gt o v 0 0 Z and cloning may not be successful Cloning is only QuickSet Il Program
19. button on the remote control DVI PC OUTPUT dNLIS LNIWdINOA IWNYILX A 13 EXTERNAL EQUIPMENT SETUP DVD SETUP When connecting Component cable 1 How to connect Connect the video outputs Y PB PR of the DVD to the COM PONENT DVD DTV 1 jacks on the set eS AUDIO IN Match the jack colors Y green PB blue and PR red 2 Connect the audio outputs of the DVD to the COMPONENT DVD DTV 1 jacks on the set dNLIS LNIWdINOA TWNYILXI 2 How to use a Turn on the DVD player insert a DVD m Select Component input source by using the TV AV button on the remote control a If connected to COMPONENT DVD DTV 2 input select Component2 input source m Refer to the DVD player s manual for operating instructions Component Input ports To get better picture quality connect a DVD player to the component input ports as shown below Component ports on the TV Y Ps Pr Y Ps Pr Video output ports Y BY RY on DVD player Y Cb Cr Y Pb Pr 14 When connecting with an S Video cable VIDEO 1 AUDIO IN 25 g SELECT 1 How to connect control C E ony VIDEO 3 VIEO 3 S VI S VIDEO input on the set 1 Connect the S VIDEO output of the VCR to the By 2 VIDEO IN Connect the audio outputs of the VCR to the AUDIO input jacks on the set When connecting H
20. button on the remote control m If connected to COMPONENT DVD DTV 2 input select Component2 input source HDMI1 DVI 480i Yes No 480p Yes Yes 720p Yes Yes 1080i Yes Yes dNLIS LNIWdINOA IWNYILXI A 11 EXTERNAL EQUIPMENT SETUP dNLIS LNIWdINOA TWNYILXI al 12 When connecting HDMI cable 1 How to connect Connect the digital set top box to HDMI DVI IN jack on the set No separated audio connection is necessary HDMI supports both audio and video pvc AUDIO HDMVOVI 2 How to use Turn on the digital set top box Refer to the owner s manual for the digital set top box Select HDMI input source by using the TV AV button on the remote control O NOTE gt When connected the TV will tell a connected device what resolution it supports and the resolution it prefers If the device supports this Auto HDMI function the player output resolution will be automatically set to 720p HDMI DTV OUTPUT gt If the device does not support Auto HDMI you need to set the output resolution appropriately When connecting HDMI to DVI cable 1 How to connect Connect the DVI output of the digital set top box to the HDMI DVI IN jack on the set Connect the audio output of the digital set top box to the DVI PC AUDIO IN jack on the set 2 How to use m Turn on the digital set top box Refer to the owner s manual for the digital set top box a Select HDMI input source by using the TV AV
21. channels do not contain a sub channel number TIMER Press repeatedly to select a preset time to automatically shut the TV off i MUTE Turns sound Off and On while the picture remains CHANNEL Tunes to next available channel ENTER OK Press to view the Channel Time display or to remove any on screen display or menu ALARM Use to go to the Alarm menu Set a time for the TV to turn itself on MENU SELECT ADJ Adjust Press to display the main on screen menu Use SELECT to choose an option and ADJ adjust Left Right to change the selected option v gt j 1 CHANNEL PREVIEW Displays available TV channels and if active the Guest Parental Control menu set V Chip blocks to restrict both analog and digital programming e Aux Channel allows the guest to select the Audio Video inputs Use the A V jacks on the back of the TV as a source Installer Remote Control ON SCREEN MENUS SELECTION Use the remote keys indicated below to access these menus and displays In this manual the OSD On Screen Displays shown may be different The following are just generic examples to familiarize you with the TVs options Ter a Asr gt Volume Display Sleep Timer Menu SAP Display Press VOLUME Press TIMER Selects MTS sound Mono Stereo Shows currently selected sound Sets a time to automatically turn the and SAP in analo
22. custom labels to the channel on screen displays See page 62 To remove menu press MENU Note 2 5 4 MENU can be performed more than once Verify TV Setup At this point verify that the channel lineup channel icons and custom labels are correct Make sure the TV features are set per your requirements Set item 028 CH OVERIDE to 000 to lock the channel scan After the preceding has been completed the Master TV setup is ready to be copied to the LT2002 Clone Programmer see next page LODGING PTC INSTALLER MENU 000 INSTALLER SEQ UPN 000 000 000 000 PTC V1 00 000 FPGA 09F1 CPU V1 01 00 L26W56XA Installer Menu 028 CH OVERIDE 001 073 CH NOT AVBLE 001 L26W56XA Installer Menu Items RJP Remote Jack Pack TV Setup 004 STRT CHANNEL XXX 040 AUTO CAMPORT 000 093 RJP AVAILABLE 001 RJP Available If you will use an RJP in your system review installer items 004 Start Channel cannot be set to 000 Set 040 Auto Camport to 000 Set 093 RJP Available to 001 DIGITAL 19 3 ANALOG 2 WXYZ MONO WXYZ Custom Channel Label WXYZ created in 2 5 4 Menu Add Channel Label Mode 028 CH OVERIDE 000 After TV setup has been verified set item 028 Ch Overide back to 000 JAGOW 1VIDYAWWOD a 53 COMMERCIAL MODE AGOW 1VIDYAWWOD E 54 CLONING CONNECTIONS LEARNING SETUP Connections for the LT2002 Clone Programmer to Learn th ere oer
23. for set by program Set to 1 for 4 3 Set to 2 for 16 9 Factory Default Set to 4 for Zoom 1 Set to 5 for Zoom 2 102 ATSC BAND Sets up TV to receive different types of incoming signals O Broadcast 1 CATV 2 HRC 3 IRC 4 Same as NTSC 103 ATSC TUNE MODE Selects ATSC tuning mode 0 Virtual 1 Physical Note The setting above is ignored if Installer item 102 ATSC BAND is set to 1 CATV 2 HRC or 3 IRC Then 103 ATSC TUNE MODE above always resets itself to Physical 1 regardless of what value appears for item 103 on the Installer menu 104 START MINOR CHANNEL Sets XX XX minor starting channel at power up O NTSC If not O number selected is the Minor start channel number 106 ASP RATIO LOCK Aspect Ratio Lock Set to 1 to retain previous aspect ratio with power Off Set to O to retain default aspect ratio with power Off See item 96 Default Aspect Ratio above 107 BANNER SELECT Not applicable 116 VIDEO MUTE EN Video Mute Enable Set to O for normal Set to 1 for blank 117 FACT DEFAULT Factory Default Set to O for normal Set to 1 to load default settings for all installer menu items WARNING Setting this to 1 will reload the factory defaults and clear the channel list including erasing any assigned Channel Icons and Labels PEFERENCE TV Features Menus that can be Cloned Closable Menu Features Channel Picture Sound Setup Caption Auto Program Mode Mod
24. physical or comedic violence or may frighten children under the age of seven TV Y All children The themes and elements in this program are specifically designed for a very young audience including children from ages two six 11 20 PM Sep 11 2006 Time V Chip Menu Language Set ID 11 20 PM Sep 11 2006 Can French Rating D L Rating TVPG Rating Sep 11 2006 Cok _ menu TV FCC Content Sub Categories V Violence S Violence L Offensive language V Violence D Dialog sexual innuendo FV Fantasy or cartoon violence SDNILVY O YLNOD TVLNAUVd E 37 PARENTAL CONTROL RATINGS SONILVY TIOULNOD TVLNAUVd U 38 MPAA Ratings Restricting movies by their rating Press the MENU button and then use the ADJ A or Y button to highlight the Setup menu and press the OK Enter button Use the ADJ A or Y button to highlight V Chip and press the OK Enter button Enter the 4 digits password Use the ADJ A or Y button to highlight the MPAA Rating and press the OK Enter button O Use the ADJ A V lt P buttons to choose and set up the menu options for MPAA Rating 6 When finished press MENU repeatedly to remove the menus Description of the MPAA and TV FCC Rating Codes The MPAA Rating System Movies G General Audience No restrictions PG Children under 13 should be accompanied by an adult PG 13 Parental guidance
25. to use m Set VCR output switch to 3 or 4 and then tune TV to the same channel number a Insert a video tape into the VCR and press PLAY on the VCR Refer to the VCR owner s manual Cm S VIDEO VIDEO ANTOUT an OUTPUT SWITCH Wall Jack O Antenna When connecting with a RCA cable 1 How to connect 1 Connect the VIDEO 1 jacks between TV and VCR Match the jack colors Video yellow Audio Left white and Audio Right red 2 How to use m Insert a video tape into the VCR and press PLAY on the VCR Refer to the VCR owner s manual m Select AV1 input source by using the TV AV button on the remote control a If connected to VIDEO3 select AV3 input source When connecting with an S Video cable 1 How to connect 1 Connect the S VIDEO output of the VCR to the S VIDEO input on the set Connect the audio outputs of the VCR to the AUDIO IN jacks on the set 2 How to use m Insert a video tape into the VCR and press PLAY on the VCR Refer to the VCR owner s manual m Select S VIDEO input source by using the TV AV but ton on the remote control Q NOTE gt The picture quality is improved compared to normal composite RCA cable input RS 232C SELECT conTrRoL g NORMAL ic ANT IN ua ANTOUT OUTPUT SWITCH VIDEO 1 RS O EOIN contro
26. 3 4 5 Aux Input Configuration 26LH1DC3 4 5 Aux Input Configuration ENABLE MPI DATA DIRECT MPI DATA DATA STATUS STATUS ACCESS 26LH1DC3 4 5 STATUS TYPE TYPE 0xD2 AUX Tuning meta ermen 0x41 eee UNTA TYPE OX0D SOURCE ENABLED R W SOURCE R ASSIGNMENT OLD_OCV OLD a Video2 Video Front Video Front Front CV ONLY CAMPORT_EN Camport Camport Rear Video Rear Video Aux Aux S Video S Video Rear Rear Video1 Rear CV ONLY REAR_AUX_EN Component 2 YPrPb2 EN pvm PTWPC COMPORT EN Bront Front rue Computer Computer RGB1 ek REAR RGB EN SVGA Rear Computer 0 VIDEO cV RGB ENABLE NTSC Rear NTSC Rear 0 VIDEO woos S Video Computer Computer 1 S VIDEO Rear Component component video Componenti YPrPb EN APPENDIX TROUBLESHOOTING Some quick and easy tips to resolving problems Software Problems TV not functions properly Software lockup Remove power cord for 5 minuts Software Corrupted 2 5 5 MENU performed Start all over with item 117 set to 001 press Enter then redo Auto Program Channel List Clock etc more than once Note 2 5 4 MENU can be done more than once Virtual and Physical channels appear in channel scan w Channel Up Down After Auto Program and Channel List etc press 2 5 5 MENU to transfer channels and TV setup to 2 5 5 MENU not per internal TV controller Afterward only Physical or only Virtual chann
27. ADJ A or Y button to highlight the Sound menu and press the OK Enter button Use the ADJ A or Y button to highlight Mode and press the OK Enter button 3 Use the ADJ button to customize each option or choose a preset mode like Music Movie etc When finished press MENU repeatedly to remove the menus Sound Setting Adjustment User Mode Adjust the sound to suit your taste and room situations Press the MENU button and then use the ADJ A or V button to highlight the Sound menu and press the OK Enter button Use the ADJ A or button to highlight Mode and press the OK Enter button Use the ADJ button to choose Manual and use ADJ A V lt P buttons to set your own settings for the options When finished press the OK Enter button a When finished press MENU repeatedly to remove the menus 11 20 PM Sep 11 2006 11 20 PM Sep 11 2006 Sep 11 2006 Mode Standard Balance Digital Output Auto Volume Internal Speaker j Digital Output Standard gt gt Treble GCMmmmD Auto Volume B CEDEME Ga Multi Track nternal Speaker LAP Move selet emu Back Mode Manual Balance j Digital Output Auto Volume Internal Speaker j Digital Output Mode Weta rl gt Treble Auto Volume Bass GSD Multi Track Internal Speaker lt Move PSeleot hemu Back TOYLNOD JDVNONVI 8 ANNOS a 43 TOYLNOD JDVNO
28. CONS or labels for channels without Icons 6 Transfer the TV setup Enter the 26LH1DC3 4 5 installer menu Press 2 5 5 MENU to start the transfer of the TV s setup to the 26LH1DC3 4 5 Once the transfer is complete the system will exit the Installer menu Note Only do 2 5 5 MENU once The TV setup may be corrupted if 255 Menu is done more than one time 7 Edit Add Channel ICONs and Channel Labels as needed Enter Installer menu With menu displayed press 2 5 4 MENU See page 62 for detailed instructions Editing Adding Channel ICON and Labels on Master TV Changing a Channel s ICON on Master TV Changing Adding Channel Labels on Master TV Changing Source Labels on Master TV 8 Verify Master TV setup and feature configuration e Did you add Channel ICONS e Did you add Channel Labels e Did you add Aux Source Labels e Did you adjust all TV menu options as required The TV master setup is now ready to be cloned Go to the master TV cloning section or continue on to page 52 After verifying master setup enter the 26LH1DC3 4 5 Installer menu and set Installer menu item 028 Ch Overide to 000 JAGOW 1VIDYAWWOD a 65 COMMERCIAL MODE PEFERENCE Software Version Check Procedure to Check Software Version The software version of the 26LH1DC3 4 5 may be checked by accessing the INSTALLER MENU To do this press the MENU button at least 10 times until the menu display ceases
29. DMI cable 1 How to connect Connect the HDMI output of the DVD to the HDMI DVI IN jack on the set No separated audio connection is necessary HDMI supports both audio and video 2 How to use Select HDMI input source by using the TV AV button on the remote control m Refer to the DVD player s manual for operating instructions O NOTE gt When connected the TV will tell a connected device what resolution it supports and the resolution it prefers If the device supports this Auto HDMI function the player output resolution will be automatically set to 720p gt If the device does not support Auto HDMI you need to set the output resolution appropriately To get the best picture quality adjust the output resolution of the DVD to 720p dNLIS LNIWdINOA TWNYILXI a dNLIS LNIWdINOA TWNYILXI al 16 EXTERNAL EQUIPMENT SETUP VCR SETUP m To avoid picture noise interference leave an adequate distance between the VCR and TV a If the 4 3 picture format is used the fixed images on the sides of the screen may remain visible on the screen This phenomenon is common to all manufactures and in consequence the manufactures warranty does not cover the product bearing this phenomenon When connecting with an antenna 1 How to connect Connect the RF antenna out socket of the VCR to the ANTENNA CABLE socket on the set Q Connect the antenna cable to the RF antenna in socket of the VCR 2 How
30. DVI input this function is used After connecting RGB PC or HDMI DVI to PC input and checking the screen quality When you change the resolution select the proper resolution in pre sent input to see the best picture appearance Adjustment for screen Position Frequency Phase and Auto Press the MENU button and then use the ADJ A or V button to highlight the Setup menu and press the OK Enter button Use the ADJ A or Y button to highlight PC and press the OK Enter button Use the ADJ A or button to highlight Position Frequency Phase Auto and press the OK Enter button 4 Use the ADJ A V lt P button to make appropriate adjustment When finished press OK Enter button a The Frequency Phase adjustment range is 0 1 00 When finished press MENU repeatedly to remove the menus Menu Language Language Menu Transparency Transparency Position gt Position M dNL3S LNAWdINOA I1YNY31X4 A 21 EXTERNAL EQUIPMENT SETUP DVI HOOKUP TO RJP OR DVD PLAYER 1 How to connect Locate the DVI out port on the RJP Remote Jack Pack or DVI device Connect a DVI cable between the RJP and DVI in port on the TV If required make Audio connections as indicated to the right After all connections have been made select the DVI source to display the DVI image on the TV dNLIS LNIWdINOA TWNYILXI al COMPUTER PC HOOKUP 1 How to connect Locate the compu
31. ENTIAL ELECTRICAL SHOCK OR FIRE HAZARDS TO AVOID DEFEATING THE SAFEGUARDS THAT HAVE BEEN BUILT INTO YOUR NEW PRODUCT PLEASE READ AND OBSERVE THE FOLLOWING SAFETY POINTS WHEN INSTALLING AND USING YOUR NEW PRODUCT AND SAVE THEM FOR FUTURE REFERENCE OBSERVING THE SIMPLE PRECAUTIONS DISCUSSED IN THIS MANUAL CAN HELP YOU GET MANY YEARS OF ENJOYMENT AND SAFE OPERATION THAT ARE BUILT INTO YOUR NEW PRODUCT NOTE gt If the TV feels cold to the touch there may be a small flicker when it is turned on This is normal there is nothing wrong with the TV gt Some minute dot defects may be visible on the screen appearing as tiny red green or blue spots However they have no adverse effect on the TVs performance gt Avoid touching the LCD screen or holding your finger s against it for long periods of time Doing so may produce some temporary distortion effects on the screen SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with
32. Icons are available for 7 Transfer the TV setup After all menu options and features are set to your requirements enter the installer menu Press 2 5 5 MENU to start the transfer of the TV s setup to the PTC After the transfer is complete the system will exit the Installer menu 8 Set any Channel Labels as needed a Enter Installer menu b Press 2 5 4 MENU to enter the menu In this menu edit the assigned channel Icons assign custom text labels for channels and assign labels for active Aux sources Press Menu to exit 9 Enter the Installer menu Set item 028 Ch Overide to 000 and exit menu 000 INSTALLER SEQ 000 UPN 000 000 000 000 PTC V1 00 000 FPGA 09F1 CPU V1 01 00 XIGN4dddV i Mode SICUE Sep 11 2006 me E Gs 028 CH OVERIDE 000 Brightness 79 Sesen femer core ae DIGITAL 19 3 ANALOG 2 Lee alor a MONO STEREO SAP WXYZ Tint 0 MONO _ Sep 11 2006 WXYZ Searching 76 Auto Program Channel Label Fine Tune Auto Program Channel Label pe Channel List E gt l ANALOG34 Added L a Menu NOTE 77 78 NOTE PRODUCT SPECIFICATIONS The specifications shown above may be changed without prior notice for quality improvement MODELS 26LH1DC3 4 5 Dimensions Width x Height x Depth Weight Powe
33. LG 23 1 Cood Installation and Operating Guide 26LH1DC3 26LH1DC4 26LH1DC5 Please read this manual carefully before operating your set Retain it for future reference Record model number and serial number of the set See the label attached on the back cover and quote this information to your dealer when you require service www lgcommercial com WARNING CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead A symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance The exclamation point within an WARNING TO PREVENT FIRE OR SHOCK HAZARDS DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE THIS PRODUCT MUST BE USED WITH UL LISTED MOUNTING BRACKET IT IS FORBIDDEN TO CONNECT THIS TV TO ANY TELECOMMUNICATION NETWORK TELEPHONE NOTE TO CABLE TV INSTALLER This reminder is provided to call the CATV system installer s attention to Articl
34. Learning is only possible between identical model devices However the LT2002 Clone programmer can store up to 3 different master setups WARNING Copying a blank or incorrect memory intoa TV STB or other device will cause the TV STB or other device to operate erratically or become inoperable e Use an Installer s remote to operate Learning and Teaching menus e Make sure that the batteries in the Clone programmer are fresh programmer TV which has the clock set to the current time Setting the time and transferring it to the Clone or other device is a separate procedure Follow the connection diagram above to connect the Clone to a Master 26LH1DC3 4 5 TV display panel After learning is complete to another identical 26LH1DC3 4 5 TV display panel to teach it the master setup After the 26LH1DC3 4 5s setup has been copied to another identical 26LH1DC3 4 5 that identical unit with the copied setup needs to be disconnected from power for about 15 seconds to activate the newly copied setup See the Clone Troubleshooting section to resolve problems e If batteries are removed the Clone Clock time will be Turn to the next page to continue Cloning Setup lost e Decide if you want to set the time from the Clone CLONE PROGRAMMER LEARNING SETUP Learning the Master TV Setup Instructions for the Clone Programmer to Learn the Master 26LH1DC3 4 5 Setup Use MPI Cable to Connect T2002 Clone Programmer to Mas
35. NVI BF ANNOS a SOUND amp LANGUAGE CONTROL Sound Balance Setup Adjust the speaker balance for optimum sound quality Press the MENU button and then use the ADJ A or Y button to highlight the Sound menu and press the OK Enter button Use the ADJ A or Y button to highlight Balance and press the OK Enter button Use the ADJ lt or button to move the sound more to the Left or Right When finished press MENU repeatedly to remove the menus Digital Audio Output Settings Set the digital audio output as Dolby Digital or PCM Press the MENU button and then use the ADJ A or Y button to highlight the Sound menu and press the OK Enter button Use the ADJ A or Y button to highlight Digital Output and press the OK Enter button Use the ADJ A or Y buttons to choose Dolby Digital or PCM When finished press MENU repeatedly to remove the menus lt Dolby Digital gt DOOLEY This product is under license of Dolby Laboratories DIGITAL The Dolby or D symbol is a trademark of Dolby Laboratories 44 Sep 11 2006 11 20 PM Sep 11 2006 Balance j Digital Output Auto Volume Internal Speaker pe Adjust left Light balance Balance _ Digital Output Multi Track Internal Speaker Menu Mode Balance Fj Digital Output Dolby Digital gt Auto Volume MultiTrack English Ay itove Cox select Ciena Back PJ Digital Outpu
36. R on the remote to remove Installer Menu 2 Set Up TV Features See Picture Sound Setup menus etc See TV Clonable options list on page 62 Note Digital Font options are only available after a channel search has been run and when the TV is tuned to an active digital channel with digital captions 3 Run Auto Program Search for all available channels Go to the Channel menu and access the Auto Program option follow on screen instructions a Edit Channel Scan In the Channel Menu access the Channel List menu e Delete channels per your system requirements do you want to delete any free channels so the guest cannot access them e Add familiar Channel Icons like ABC CBS NBC etc to the channel onscreen display Add identifiable labels for the end user to readily know what common networks are available In the Channel menu select the Channel Label option follow instructions on the bottom of the screen 4 Transfer TV Setup to Controller Box 2 5 5 Menu After the TV channel scan has been edited and channel label icons added enter the Installer menu Once in the Installer menu press 2 5 5 and MENU on the remote This transfers the TV setup to the internal controller box Note Only do 2 5 5 MENU once or TV setup may be corrupted TV scans available channels and exits menu when transfer to controller is complete 5 Perform Adding Custom Channel Labels 2 5 4 Menu Mode Enter Installer menu press 2 5 4 and Menu Add your own
37. Remove obstructions Weak batteries Replace batteries Wrong battery polarity Check that and match in battery compartment Too much light in room Dim room light XIGN4dddV E Wrong Installer remote control Incorrect Bed 1 2 setting Set correct Bed 1 2 setting Picture Reception Normal picture poor or no sound Audio muted Press MUTE or use Volume Up key to increase sound level Broadcast problem Try a different channel TV Speakers Off Turn TV speakers on Broadcast Tuning Mode Digital Channel OSD No Information available display Item 103 set to 1 physical channels tuning Set Item 103 to O for information to be added to virtual channel tuning digital OSD Note For other problems not caused by the 26LH1DC3 4 5 refer to other devices operating guide 70 CLONING PROCEDURE TROUBLESHOOTING IMPORTANT INSTALLER SETUP INFORMATION PLEASE READ THE FOLLOWING Warning Do not use LT2002 while a Note The LT2002 programmer is designed to be used with TVs LodgeNet PPV card is installed in TV or clone containing the 221 01006 and later processors Use with earlier TV programmer will be damaged sets may give unpredictable results Processors used before the 221 01006 04 have a limited screen display capability They cannot display entire screens as shown in the quick setup Reset Clone After Static Shock instructions accompanying the LT2002 clone program
38. Screen Setup for PC mode 0 2 21 DVI Hookup To RJP or DVD Player 22 Computer PC Hookup 0 0006 22 WATCHING TV CHANNEL CONTROL User Remote Control Button Functions 23 Installer Remote Control Button Functions 24 On Screen Menus Selection 25 Channel Sear 26 TIME SETTING Clock Setting 2 s 28c Sse ci aes a hes 30 Daylight Saving 00 ee 32 Time Zone Settings 06 32 TV Activation Time Settings 33 TV Deactivation Time Settings 33 Auto Off seve 2A ied MEERA As 34 Set Password amp Lock System 0 008 35 Movie amp TV Ratings eee 37 SOUND amp LANGUAGE CONTROL Caption Text eee 41 Preset Sound Settings 43 Sound Setting Adjustment user Mode 43 Sound Balance Setup 44 Digital Audio Output Settings 44 Aautomatic Volume Control Settings 45 Analog Audio Settings 45 Digital Audio Language Settings 46 Using External Speakers 46 Menu Language 0 cece 47 Menu Transparency Settings 48 Set ID cy A es 48 PICTURE CONTROL Preset Picture Settings 0 00 000 49 Screen Format Adjustments 50 Noise Red
39. TV Activation Time Settings You can set a time for the TV to automatically turn on Press the MENU button and then use the ADJ A or V button to highlight the Setup menu and press the OK Enter button D Use the ADJ A or V button to the Time 3 Press the OK Enter button to highlight Clock Use the ADJ A or button to highlight On Timer and press the OK Enter button Use the ADJ A V lt P buttons to choose AM PM Hours Minutes and time period to turn on 6 When finished press MENU repeatedly to remove the menus TV Deactivation Time Settings You can set a time for the TV to automatically turn off Press the MENU button and then use the ADJ A or Y button to highlight the Setup menu and press the OK Enter button 2 Use the ADJ A or button to the Time Press the OK Enter button to highlight Clock Use the ADJ A or button to highlight Off Timer and press the OK Enter button O Use the ADJ A V lt P buttons to choose AM PM Hours Minutes and time period to turn off When finished press MENU repeatedly to remove the menus 11 20 PM Sep 11 2006 11 20 PM Sep 11 2006 11 20 PM Sep 11 2006 Menu Language coos A On Timer Off Timer Queru ONILLIS IWIL A Menu Language Off Timer AV Adjust lt gt Move enu Back 33 TIME SETTING ONILLAS AWIL Hl 34 Auto Off If there is no signal on the TV for 15
40. UICK SETUP GUIDE Quick Setup Guide for Integrated Master TVs See table of contents for more information i AUDIO VOEON UPDATE SELECT re aw OTS orm own won J nn Sate amp fo 0 we span she latory DA VIDEO s S viDEo VIDEO ACN ne T s mos Antenna Wall Jack AC Power Cord Setup Instructions for Making a Master TV 1 Connect TV to signal source connect power cord and turn TV power on m 2 Enter the TV installer menu Note If this is not a new setup set Installer item 117 to 001 and press Enter to reset TV to default condition e Set Tuning Band Set Installer menu item 003 BAND AFC to CATV 001 Broadcast 000 etc e If necessary set Installer menu item 028 CH OVERIDE to 001 In addition set any other installer items as required of your system Exit Installer menu 3 Access the Master TV menus and set the closable options on the menus to the desired configurations Refer to the Closable Menu Features Chart for the TV Picture Sound Time etc m 4 Do a Channel Search run Auto Program aka EZ Scan 117 FACT DEFAULT 00X 5 Enter the Channel Edit menu and delete channels per your requirements 003 BAND AFC 00X TT 6 Enter the Channel Label menu and assign ICONs to the channels Note You can add Channel ICONS typically network logos like ABC NBC 028 CH OVERIDE 001 PBS etc in this step Or in Step 8 add Channel ICONS or custom text labels for channels which no
41. Use the ADJ A or button to highlight the D L Rating and press the OK Enter button Use the ADJ A or Y buttons to choose DimO Dim1 Dim2 or Dim3 and press the OK Enter button 6 Use the ADJ A or Y buttons to choose D1L1 D1L2 or D1L3 When finished press MENU repeatedly to remove the menus O NOTE gt This function may become available in the future and will be available only for digital channel signal gt This function operates only when TV has received RegionS Rating data 11 20 PM Sep 11 2006 11 20 PM Sep 11 2006 Sep 11 2006 Menu Transparency Set ID Time V Chip Please Enter your PIN Set ID Q H Changing PIN Set Block Hour Can French Rating D L Rating Cok _ CMENU n Off D L Rating 1 1 Changing PIN Dimo et Block Hour TVPG Rating Dim2 Dim3 an English Rating Rating D L Rating Dimo Cok select CWENU Back SOUND amp LANGUAGE CONTROL CAPTION TEXT Turn Captions On Off NOTE Pressing CC on the remote to select a captions option will also turn closed captions on Press the MENU button and then use the ADJ A or V button to highlight the Caption menu and press the OK Enter button Use the ADJ A or Y button to highlight On Off and press the OK Enter button Use the ADJ A or Y button to choose On or Off 4 When finished press MENU repeatedly to remove the menus Sep 11 2006 Analog Mod
42. channel scan j Channel Label Label Channel List Fine Tune j Channel Label GERAAS ls When finished press MENU repeatedly to remove the menus O NOTE gt If you delete a found channel it isn t gone forever Simply re enter the Channel List menu and re add the channel to show the check mark Channel List 1 1 Auto Program ANALOG 14 gt e lt Eeee ANALOG 16 Channel List DIGITAL 7 1 Fine Tune DIGITAL 11 1 DIGITAL 84 1 DIGITAL 88 1 KESSAK AY move gt Addibel OK View menu Back TOULNOD TANNVHD AL DNIHD LVM a 27 WATCHING TV CHANNEL CONTROL TOYLNOD TANNVHD AL ONIHDLVM U 28 Channel Labels Setup Channel Labels help the user identify the channel or network being viewed In the Setup menu with the Channel Labels option highlighted use the ADJ A V lt gt buttons to scroll through the available channel labels such as A amp E AMC ESPN HBO etc These are a series of preset labels from which you can choose the more common networks Use any of these to label the channels in the TV s memory Press the MENU button and then use the ADJ A or V button to highlight the Channel menu and press the OK Enter button Use the ADJ A or Y button to highlight Channel Label and press the OK Enter button This action displays the Channel Label menu Use Channel A or Y button to select channels and the ADJ A V lt P buttons to naviga
43. clone pro grammer If this is the case check for a dam aged cable poor contacts or other connection troubles e If the status indicator is red the programmer batteries are low and should be replaced Install 4 high quality alkaline AA batteries 55 COMMERCIAL MODE AGOW 1VIDYAWWOD E 56 CLONING CONNECTIONS TEACHING SETUP Teaching the Master Setup to Another 26LH1DC3 4 5 Connections for the LT2002 to Teach another 26LH1DC3 4 5 the Master Setup ee L N emi 1 l KIr x T 7 Antenna i or CATV 1 I i I 1 I l l l y y I I I I I THE CLONE HAS CONTROL OF THE TV a l THE CLONE Is VERSION xx THE TVIS VERSION XX THE SW IS REVISION XX CLONE CLOCK XX XX WoLooK xe PRESS ANY KEY TO CONTINUE DISCONNECT CLONE WHEN DONE ie Master 26LH1DC3 4 5 Teach Master 26LH1DC3 4 5 s Setup to the target 26LH1DC3 4 5 After learning is complete remove the M P cable from the master 26LH1DC3 4 5 and connect it to the target 26LH1DC3 4 5 that you want to copy the master 26LH1DC3 4 5 s setup into With THE CLONE HAS CONTROL OF TV message displayed press 2 to go to the TEACH TO TV option press ON OFF POWER or ENTER Select the LT2002 memory that the new setup is in Press On Off to transfer the new setup and other information to Ferrite Core TDK ZCAT 2035 0930 ii r jy p a See QuickSet II Progra
44. d to 1024x768 60Hz refresh rate of the PC graphic card can not be changed change the PC graphic card or consult Depending on the graphics card DOS mode may the manufacturer of the PC graphic card not work if a HDMI to DVI Cable is in use gt Avoid keeping a fixed image on the screen for a gt Check the image on your TV There may be noise long period of time The fixed image may become associated with the resolution vertical pattern permanently imprinted on the screen contrast or brightness in PC mode If noise is present change the PC output to another gt The synchronization input form for Horizontal and resolution change the refresh rate to another rate Vertical frequencies is separate or adjust the brightness and contrast on the dNLIS LNIWdINOA TWNYILXI al Supported Display Specifications RGB PC HDMI1 DVI PC mode HDMI1 DVI DTV HDMI2 DTV mode Resoluti Horizontal Vertical Resoluti Horizontal Vertical esolution Frequency KHz Frequency Hz esotution Frequency KHz Frequency Hz 640x350 31 469 70 08 720x480 31 469 59 94 EE E P E EE S EA 1280x720 44 960 59 94 640x480 31 469 59 94 45 000 60 00 1024x768 48 363 60 00 1280x768 47 776 59 87 1360x768 47 720 59 799 1366x768 47 130 59 65 RGB PC mode only 640x350 720X400 SCREEN SETUP FOR PC MODE Overview When the RGB input of the set is connected to a PC output select the RGB PC as the main input mode When HDMI DVI connect to PC output and select HDMI
45. d to know how to enter the 26LH1DC3 4 5 Installer menu and make changes to the default values as required If necessary familiarize yourself with the 26LH1DC3 4 5 Installer menu and how to make and save changes in the menu before attempting to clone the 26LH1DC3 4 5 Master TV setup You will also need an Installer remote control similar to the one shown in the front of this manual Finally the TV s clonable features need to be set up This is a critical step If the Master TV display panel s clonable features like adding channel icons or channel Making a Master TV Detailed Instructions The following describes the procedure for preparing a Master 26LH1DC3 4 5 for cloning and the procedure for adding Channel Icons and or Labels Note 1 Disconnect all Aux inputs Under certain conditions Auto Program Scan is disabled if there is an Aux input active Note 2 Under certain conditions changes to the input mode of the RGB inputs will not take effect until the power is cycled TV is turned Off and On To avoid confusion disconnect all RGB inputs before entering the Installer menu 1 Enter the 26LH1DC3 4 5 installer menu a Reset the internal controller to factory default by accessing installer menu item 117 FACT DEFAULT set it to 1 and press ENTER The value will change back to O after the TV s internal controller has been restored to factory default condition b Within the Installer menu set the Installer m
46. e em ES Er vn Automatic Time Settings If you select auto time setting time will be set from the digital broadcast information Press the MENU button and then use the ADJ A or V button to highlight the Setup menu and press the OK Enter button 2 Use the ADJ A or V button to the Time 3 Press the OK Enter button to highlight Clock Manual or Auto will appear on the menu next to clock Select Auto on the sub menu with the ADJ A or Y button and press the OK Enter button Use the ADJ A V lt P buttons to set the Daylight Savings and Time Zone options for your local area See the next page When finished press MENU repeatedly to remove the menus NOTE gt Caution Some digital channels may change the time incorrectly using the Automatic Clock Set feature gt In this event the Alarm may not function as intended and the TV may not turn on at the expected time gt If the end user will have access to the Alarm it may be best to use the Manual Clock Set mode and set the clock to local time manually lt Timezone ere n Auto Off Clock Manual Clock Manual LAY Select enu Back Mini glossary A four digit figure broken down into hours and minutes used to enter the current TIME time when setting the clock or wake up alarm HOURS First two digits that are entered when setting the clock or the wake up alarm MINUTES The last two digits that are entered whe
47. e Analog Captions will display on the screen whether the signal is from an RF channel or external equipment input NOTE Pressing CC on the remote selects a captions Eem MW Analog Mode CC1 option Press the MENU button and then use the ADJ A or Y button to highlight the Caption menu and press the OK Enter button Use the ADJ A or Y button to highlight Analog Mode d button onon N ceo E O Gia a o Use the ADJ A or Y button to choose CC1 TEXT4 and press the OK Enter button ieee T EEP When finished press MENU repeatedly to remove the menus E Mini glossary The term for the words that scroll across the bottom of the TV screen usually the CAPTIONS audio portion of the program provided for the hearing impaired TEXT The term for the words that appear in a large black frame and almost cover the entire screen usually messages provided by the broadcaster 104 LNOD 39YN9NY1 8 ANNOS a 41 TOYLNOD JDVNONVI B ANNOS a 42 SOUND amp LANGUAGE CONTROL Digital Captions Mode Digital Captions only appear on digital channels tune in a digi tal channel that is actually broadcasting digital captions Q NOTE Pressing CC on the remote selects a captions option Press the MENU button and then use the ADJ A or Y button to highlight the Caption menu and press the OK Enter button Use the ADJ A or Y button to highlight Digital Mode and press the OK Enter button 3 Use t
48. e 820 40 of the National Electric Code U S A The code provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of the cable entry as practical REGULATORY INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help CAUTION Changes or modifications not expressly appro
49. e Time On Off Active channels Contrast Treble Clock Analog Mode found with the Brightness Bass Auto Off Digital Mode channel search Color Balance V Chip Digital Font Option Channel Labels Sharpness Auto Volume TVPG Rating Channel List Tint Multi Track MPAA Rating Fine Tune Color Temperature Internal Speaker Menu Language Screen Format SET ID Film Mode Note For Digital Font Options if any default setting is left unchanged prior to cloning then all the digital font options wil be set to default settings If you want custom digital font options to be clonable set all digital font options to settings other than Default JGOW 1VIDYAWWOD a 63 COMMERCIAL MODE AGOW 1VIDYAWWOD E 64 PEFERENCE Procedures for adding Channel Label Icons Custom Channel Labels 2 5 4 MENU Mode Adding Channel Icons and Labels in the 2 5 4 Menu Mode Editing Adding Channel ICONs and or Labels If there is no pre assigned ICON you can make a channel label of up to 7 characters to help in identifying the channel or network At your option channel labels can also be added in Editing and adding the labels can only be done if there are channels entered into the 26LH1DC3 4 5 s channel map either by using the method described in item 6 page 64 by cloning or by the use of the master addition to a pre assigned ICON You may also add labels for the Aux input sources to clearly identify the devices that are connected to the Aux inputs
50. e current channel bank Press E D C B A again to change banks Use the CH Channel Up Down button to cycle through the available channels Use the VOL Volume Up Down button to adjust the sound level to your preference On Screen Displays See descriptions on page 25 On screen displays will appear when the feature is active or the function is being used LED Color Action Status RED Power is Off Standby GREEN is flashing Power On sequence is processing GREEN Power is On ORANGE If Power is Off On Timer is set or Alarm is set If Power is On Off Timer is set or Sleep Timer is set PREPARATION BACK PANEL INFORMATION m Here shown may be somewhat different from your TV Back Connection Panel NOILVYVd4d dd E AUDIO VIDEO 2 SIDE AUTO CAMPORT yf M AUDIO VIDEO 1 3 IN Connect Audio Video P equipment to these jacks RS 232C SELECT a SWITCH a UPDATE SWITCH COMPONENT 1 2 IN S VIDEO IN DIGITAL AUDIO OUT Optical HDMI DVI IN DVI PC AUDIO IN O NOTE FUTURE USE PCIN RJP INTERFACE M P I INTERFACE Use with clone programmer AC IN ANTENNA CABLE Connect to an antenna or cable system gt RS 232C Update Switch and RS 232C Select Switch are reserved for qualified and authorized service and technical support personal only VESA WALL MAUNTING m Here shown may be s
51. ed with M PI input capability After the time is copied to the Clone programmer the current time can then be transferred to another TV This can be a master TV or another TV which has already had the features set up Note When using the clone programmer for teaching or learning be sure that the heartbeat pattern is shown on the LEDs Both learning and teaching should take about 45 or more seconds depending on the complexity of the master setup While the clone is functioning do not move it or otherwise disturb the clone or wiring connections If the clone finishes the function in less than 45 seconds redo the function again Press the reset button if the clone does not act normally THE CLONE HAS CONTROL OF THE TV THE CLONE IS VERSION THE TV IS VERSION THE SW IS REVISION CLONE CLOCK XX XX TV CLOCK XX XX PRESS ANY KEY TO CONTINUE DISCONNECT CLONE WHEN DONE This menu should appear by itself after the T2002 is connected to the 26LH1DC3 4 5 MPI port CLONE SELECTION MENU 1 LEARN FROM TV 2 TEACH TO TV 3 SET CLONE CLOCK FROM TV 4 SET TV CLOCK FROM CLONE 5 DISPLAY TV SETUP 6 DISPLAY CLONE SETUP TO CHANGE MENU ITEMS PRESS CHANNEL KEYS OR DIGITS TO EXECUTE ITEM PRESS ON OFF POWER OR ENTER JGOW 1VIDYAWWOD a T2002 Clone Programmer Communication Problems e A slow flashing green light indicates there are communication problems between the 26LH1DC3 4 5 and the LT2002
52. els will appear in digital channel scan formed analog channel scan will be normal Note Be sure to set item 028 Ch Overide to 000 Can not direct enter channel number Channel not included After 2 5 5 MENU only channels included in TV controller will appear in channel scan in TV If channel is available redo channel scan If it is not available it will not appear on the TV screen controller No Power See troubleshooting flow chart Display Panel Picture x Turn TV on Display panel is turned off Power failure Antenn len eee Connect Antenna Cable signal source to 26LH1DC3 4 5 connected Connections incorrect Check connections on 26LH1DC3 4 5 M PI not connected If applicable connect M PI cable to M PI device Encrypted program Try another channel Wrong tuning band Adjust Installer menu settings XIGN4ddV a 69 APPENDIX Erratic Operation Installer menu setup Wrong Installer menu settings Software problem Adjust Installer menu settings as required Remove TV power cord for 15 seconds Remote Control Remote doesn t work Remote not in TV mode Use Mode key to select TV puts remote into 26LH1DC3 4 5 mode Not aimed at IR remote sensor Point remote at TV s IR receiver on TV Remote too far from IR sensor Move remote closer to TV s IR receiver or darken room IR path to TV s receiver obstructed
53. enu items to the configuration required of your institution c It is important to set the tuning band at this time see Installer menu item 03 BAND AFC d Set Installer menu item 28 CH OVERIDE to 001 to allow access to the Auto Program and Channel List Channel Label features in the Channel Menu Exit the Installer menu 2 Access the Master TV menus and set the clonable options on the menus to the desired configuration Refer to the Clonable Menu Features Chart on the see page 63 3 Run Auto Program 4 Enter the Channel List Channel Label menu and edit the channel line up to include the Free To Guest labels are not correctly added then the cloned 26LH1DC3 4 5s TVs will all have problems As the cloning procedure is being performed specific steps need to be done at the indicated times to achieve the desired result Be sure to do each task as indicated If a procedure or step is left out or not performed completely cloning may not work At each step pay attention to assure the TV screen shows the proper message when cloning If the message indicated does not appear there is a problem with that step and cloning may not be successful Cloning is only possible when the signal source is an Analog channel not a digital channel Channels only 5 Assign ICONs to the channels using the Channel Label Menu Note You can add Channel ICONS typically network logos like ABC NBC PBS etc in this step Or in Step 7 add Channel I
54. eo 2 input on display panel If set to 0 Video 2 input on display panel is not functional 035 COMPPORT EN Computer Port Enable Enable disables display panel HDMI input jack Set to O to disable set to 1 to enable Note The setting above is ignored if Installer item 093 RJP AVAIL ABLE is set to 1 038 YPrPb EN Rear Component Video Enable Set to 1 to enable display panel rear Component Video 1 input Set to O to disable display panel rear Component Video 1 input 039 REAR AUX EN Rear Aux Enable Set to 1 to enable display panel rear AUX Video 1 input Set to O to disable display panel rear AUX Video 1 input 040 AUTO CAMPORT Set to 1 to automatically switch to Camport when equipment is connected to front Video input Set to O to disable front Video automatic source selection Note This item must be set to O in order to enable item 093 RJP AVAILABLE to be set to 1 046 STRT AUX SRCE Start Aux Source Sets the starting AUX source Start source if start channel O 1 Videol 4 RGBI1 7 Video 3 S Video 2 Video2 5 Component 2 255 Last Aux 3 HDMI 1 6 Component 1 047 AUX STATUS Set to 1 for M PI AUX source to be reported as a channel number instead of channel 0 Set to O to disable AUX identification change Controls M PI status channel response for AUX inputs Continued on next page INSTALLER MENU 053 DIS CH TIME Disable Channel Time Set to 1 to disable the Cha
55. er button Use the ADJ A or buttons to choose a preset screen format Set By Program 16 9 Zoom1 Zoom2 or 4 3 When finished press the OK Enter button When finished press MENU repeatedly to remove the menus 11 20 PM Sep 11 2006 Mode Standard Color Temperature Screen Format Noise Reduction Film Mode Mode Contrast Brightness Sharpness Tint Color Temperature Temperature gt Screen Format 16 9 Noise Reduction Film Mode Mode AY Move Cok J Select menu Back Color Temperature v Sei By Peretti Screen Format 16 9 Noise Reduction ee Zoom1 Film Mode O Pe 43 menu Noise Reduction The user can watch movies with a more realistic picture on analog channels Press the MENU button and then use the ADJ A or Y button to highlight the Picture menu and press the OK gt Color Temperature Ente r button Picture Screen Format Noise Reduction Off Use the ADJ A or Y button to choose Noise Reduction and press the OK Enter button Use the ADJ A or YW button to choose On or Off When finished press the OK Enter button When finished press MENU repeatedly to remove the Mode Color Temper Noise Reduction V of Film Mode On menus Wi Sep 11 2006 Menu Film Mode Options The user can watch movies with a more realistic picture on analog channels Turn Film Mode On to view movies with
56. ess the POWER button to turn the TV on Press the MENU button and then use the ADJ A or Y button to highlight the Channel menu and press the OK Enter button Press the OK Enter button to highlight Auto program Press the OK Enter button to start the channel search After finding all available channels a display appears briefly showing the number of analog and digital channels found When finished press MENU repeatedly to remove the menus NOTE gt gt Auto Program finds channels being received by the TV s analog and digital tuners Cable will not work unless you subscribe to a cable service NW Auto Program gt _ Channel Label Channel List F FieTune Auto TSW HEREC O vere YNCOCR gt Program j aiea Press OK to Search N Auto Program Channel Label Searching Channel List ANALOG34 Added 4 D 30 Cee e Channel List After the channel search remove unwanted channels Press the MENU button and then use the ADJ A or V button to highlight the Channel menu and press the OK Enter button Use the ADJ A or Y button to highlight Channel List and press the OK Enter button G Use the ADJ A or Y button to highlight the channel you wish to delete and press the ADJ gt button The ADJ button toggles the check mark on and off If the check mark appears next to the channel number the channel appears in the
57. g mode Change setting TV off and shows remaining time the audio language in DTV mode before TV shutoff CURREN GUIDE No Information Alarm Timer EE No ormari Current Time 11 17 AM E44 E gt M n n lt caPTiON ia gt ea lt gt Move avAdust KD Exit m Caption Display Alarm Display Guide Display Press the CC Press the ALARM Press the GUIDE to view DTV Turns selected option on or off See Set a time for the TV to turn itself program information Closed Captions page to select on options Antenna TR Avo Auto Program G SWZ al Channel Label MERETE ANALOG 16 EE 1920 1080 60Hz r Channel List iii Menu Language om NA DIGITAL 88 1 X Av gt OR C3 CHPREVIEW Channel Preview V Chip INFO Press the CH PREVIEW Press the CC Press the INFO Displays available TV channels Move to the V Chip menu Check the current program information TOYLNOD TANNVHD AL ONIHDLVM a 25 WATCHING TV CHANNEL CONTROL TOULNOD TANNVHD AL DNIHD LVM U 26 CHANNEL SEARCH Auto Program Channel Search Use Auto Program to automatically find and store all of the channels available in the selected Tuning Band Q NOTE gt Tuning Band must be set before doing the channel search See Installer menu item 003 Band AFC Default setting is 1 for CATV When Auto Program is run any assigned channel labels are automatically removed With the optional Installer remote control in hand and pr
58. he ADJ A or button to choose Service 1 Service 6 and press the OK Enter button When finished press MENU repeatedly to remove the menus Digital Font Options Press the MENU button and then use the ADJ A or Y button to highlight the Caption menu and press the OK Enter button Use the ADJ A or Y button to highlight Digital Font Options and press the OK Enter button Use the ADJ A V lt P buttons to customize each option Font Size Font Style Foreground Color etc When finished press MENU repeatedly to remove the menus O NOTE gt If the digital options custom settings are to be cloned all menu options should be set to any option other than Default If Default is left set for any one option then all the options will be reset to default after cloning Analog Mode Mode Jq Digital Mode Service1 Digital Font Option Digital Font Option MIEDEN Analog Mode S Digital Mode Service2 11 20 PM Sep 11 2006 Sep 11 2006 Digital Font Optio Sanies Service4 Service5 Service6 mo f Analog Mode j Digital Mode Digital Font Option Font Size Default Foreground Color Background Color Edge Color Foreground Opacity Background Opaci Edge Style Preset Sound Settings Match the sound mode to the program s character Music Movie Sports or News This is Feature operates only in DTV mode Press the MENU button and then use the
59. he TV e However the user s remote is included with the TV Purchase the Optional Installer s Remote and Clone Programmer To perform a normal installation set up you need an installer s remote and the LT2002 Quickset II Clone Programmer both are shown and described in later sections See your LG dealer if you wish to purchase the Installer remote and LT2002 The installer remote allows access to the Installer menus User menus in the Manual Channel Set options on the Setup menu The installer remote has Menu Select and Adjust Keys The LT2002 Quickset II Clone Programmer is used to duplicate a TV s setup and install it on another identical TV Q NOTE gt Design and specifications are subject to change without prior notice FRONT PANEL INFORMATION m Here shown may be somewhat different from your TV a Using the front control panel to operate the TV Front Panel Controls B Remote Control Sensor lt lt __ 4 TV Operation Press the POWER button to turn the TV on from standby mode Press MENU repeatedly to scroll through menus Q NOTE gt With Installer menu item 11 buttons Defeat Power Standby Indicator Glows red in Standby mode Glows green when the TV is turned on Glows orange in Sleep Timer and or Alarm mode NOILVUVda ud a A vo V lt d cH gt TV AV MENU l set to 000 the default setting Menu and TV AV buttons are disabled C D Displays th
60. inition television signals which have higher resolution than ordinary analog TV signals INPUT Refers to the input jack that receives a signal from a TV VCR DVD Player or other Audio Video device JACK An input or output connector on the back of a TV VCR DVD Player or other Audio Video device MONO SOUND Mono monaural sound is one channel of sound On more than one speaker all the speakers play the same audio OUTPUT Refers to the output jack that sends a signal out of a VCR DVD or other A V device PHYSICAL CHANNEL NUMBER Actual digital major dashed minor channel number that a station is broadcasting on RGB Red Green Blue Connection input or output port available for producing a video image using three separate colors Red Green and Blue 2ND AUDIO PROGRAMMING SAP Second Audio Programming SAP is another separate audio channel available with some programming Choosing SAP often refers to listening to audio in another language such as Spanish or French SIGNAL Picture and sound traveling through a cable or over the air to the TV STEREO SOUND Stereo Stereophonic sound refers to audio that s divided into right and left sides XIGNiddV a TUNER Device that picks up the broadcast signal and turns it into picture and sound VIRTUAL CHANNEL NUMBER The arbitrarily assigned digital dashed minor channel number that a station is broadcasting on 75 APPENDIX INSTALLER Q
61. ious page The value range is O to 63 with 63 as the default which gives the user the full range of volume control if item 008 MIN VOLUME is also set at 0 Change values with ADJ Left Right arrow keys It may be best to set the same value on every 26LH1DC3 4 5 Note The maximum volume level cannot have a value setting lower than the MIN VOLUME level described previously 010 MUTE DISABLE Enables or disables sound mute function If set to 1 sound cannot be muted mute is disabled If set to O sound can be muted 011 KEY DEFEAT Keyboard Defeat If set to 1 key defeat prevents the end user from accessing the onscreen menus with the display front panel MENU SELECT and Left Right arrow keys and TV AV do not function If set to 0 those keys do func tion Note The menus can always be accessed by pressing MENU on the Installer remote 015 SLEEP TIMER If set to 1 the SLEEP TIMER feature may be used If set to 0 the Sleep Timer is not available 016 EN TIMER Enable On Off Timers If set to 1 Timer function is available to user Set to O to disable On Off Timer functions Clock must be set in order to use Timers 017 ALARM Gives the installer the option of making the Alarm function available to the end user If set to 1 Alarm function is available to end user Set to O to disable the Alarm function Note Clock must be set before the Alarm function will work 021 V CHIP Parental Control
62. key in the Main channel number followed by the gt gt then the sub channel number Analog channels do not contain a sub channel number GUIDE Use to view DTV program information Press INFO for additional information cc Press to activate English subtitles VOLUME CHANNEL OK Enter Increase or decrease the volume Change channels Select on screen menu items and change menu values NUMBER BUTTONS Use for direct channel entry FLASHBK FLASHBACK Use to return to the last channel viewed ALARM Use to go to the Alarm menu Set a time for the TV to turn itself on TIMER Press repeatedly to select a preset time to automatically shut the TV off User Remote Control TOYLNOD TANNVHD AL ONIHD LVM a 23 WATCHING TV CHANNEL CONTROL TOYLNOD TANNVHD AL ONIHDLVM U 24 INSTALLER REMOTE CONTROL BUTTON FUNCTIONS A brief list of the buttons on the optional installers remote and what they do POWER Turns TV On or Off CC Closed Captioning Press to access closed captions FLASHBK Flashback Returns to the previous channel viewed POWER TV FM Not application VOLUME Decreases increases sound level NUMBER KEYPAD When selecting a digital broadcast channel key in the Main channel number followed by the gt gt then the sub channel number Analog
63. language Press the MENU button and then use the ADJ A or Y button to highlight the Sound menu and press the OK Enter button Use the ADJ A or Y button to highlight Multi Track and press the OK Enter button Use the ADJ A or button to choose English Spanish or French and press the OK Enter button When finished press MENU repeatedly to remove the menus Using External Speakers Set the internal speaker to Off to listen to the TV through an external audio system the TV sound will not be heard Press the MENU button and then use the ADJ A or V button to highlight the Sound menu and press the OK Enter button Use the ADJ A or Y button to highlight Internal Speaker and press the OK Enter button Use the ADJ A or Y button to choose On or Off and press the OK Enter button When finished press MENU repeatedly to remove the menus 11 20 PM Sep 11 2006 11 20 PM Sep 11 2006 Balance Digital Output Auto Volume Multi Track English Internal Speaker oe OK select Mena Back _ j Digital Output Auto Volume J English Multi Track Spanish French Y select memu Back Balance Digital Output Auto Volume Multi Track Internal Speaker On _ Digital Output Sep 11 2006 Auto Volume Multi Track AY Select Menu Back Menu Language The menus can be shown on the screen inter selected language First select your language
64. mer LT2002 possible when the signal source is an Analog channel not a digital channel 52 COMMERCIAL MODE SETUP This page provides an overview of the TV configuration See the pages listed below for more specific detailed instructions at each step how to access and use the Installer menu etc Note1 Disconnect all Aux inputs Under certain conditions Auto Program Channel search is disabled if there is an Aux input active Note2 Under certain conditions changes to the input mode of the RGB inputs will not take effect until the power is cycled TV is turned Off and On To avoid confusion disconnect all RGB inputs before entering the Installer menu Overview Commercial Mode Setup Procedure 1 Set Installer Menu Items Enter Installer Menu see page 42 for detailed instructions a Set Installer menu item 117 FACT DEFAULT to 001 and press ENTER This clears all installer menu items custom settings channel labels icons and reloads the factory default settings b Set Item 003 BAND AFC Broadcast set to 000 HRC set to 002 CATV set to 001 IRC set to 003 c Set item 028 CH OVERIDE to 001 This allows access to Auto Program Channel Labels and Channel List options in the Channel Menu d Set other particular installer items that affect your TV programming network See pages 57 62 e After all required installer menu item settings have been adjusted press ENTE
65. mer Use After replacing exhausted batteries or if the programmer the printed menu illustrations on the quick setup sheet supplied behaves strangely after a static shock activate the with the Clone as an aid to making your programming choices internal reset switch and restore normal operation Although the menus are not all displayed the clone functions After a reset check the real time clock setting It may be necessary to reset the Clone Programmer clock from a TV containing the correct time all operate normally Remote does not operate clone Wrong Installer remote Only use an appropriate Installer remote to operate clone programmer with 26LH1DC3 4 5 LED does not blink M PI cord not connected Connect MPI cord 26LH1DC3 4 5 not 26LH1DC3 4 5 must be powered On for clone to work turned on Weak batteries Install 4 fresh AA high quality alkaline batteries Clone menu hard to read Weak signal Connect 26LH1DC3 4 5 to a reliable Analog channel signal source Time not available Set time ona TV copy time to Clone Programmer XIGNdddV a 71 APPENDIX CLONING PROCEDURE TROUBLESHOOTING Clone not working Try a different T2002 Clone programmer Clone programmer problem Reset Clone Programmer Clone Scans Channels more than once Clone should only scan channels once Retry cloning again Master and Other 26LH1DC3 4 5 Cloning did no
66. minutes or more or if no button is pressed for more than 3 hours this function turns off the TV automatically Press the MENU button and then use the ADJ A or Y button to highlight the Setup menu and press the OK Enter button Use the ADJ A or Y button to the Time 3 Press the OK Enter button to highlight Clock Use the ADJ A or button to highlight Auto Off and press the OK Enter button Use the ADJ A or Y button to choose On or Off 6 When finished press MENU repeatedly to remove the menus 11 20 PM Sep 11 2006 11 20 PM Sep 11 2006 Time gt Menu Language Menu Transparency Daylight Saving Auto Off AY Select eru Back PARENTAL CONTROL RATINGS SET PASSWORD amp LOCK SYSTEM Entering a PIN Password This option sets up or changes the password for blocking program ratings Press the MENU button and then use the ADJ A or V button to highlight the Setup menu and press the OK V Chip Enter button ro Ci Menu Language Language Use the ADJ A or Y button to highlight V Chip and Menu Transparency press the OK Enter button Use the ADJ A or Y button to highlight On Off and press the OK Enter button 11 20 PM Sep 11 2006 4 Use the ADJ A or Y button to highlight On and press the OK Enter button If a password has been entered key it in using the number keypad If no password has been set enter the 4 digits password 0 9 u
67. mmer LT2002 Clone Programmer r CLONE SELECTION MENU 1 LEARN FROM TV 2 TEACH TO TV 3 SET CLONE CLOCK FROM TV 4 SET TV CLOCK FROM CLONE 5 DISPLAY TV SETUP 6 DISPLAY CLONE SETUP TO CHANGE MENU ITEMS PRESS CHANNEL KEYS OR DIGITS TO EXECUTE ITEM PRESS ON OFF POWER OR ENTER This menu should appear after any key is pressed on the Installer remote r TEACHING IN PROGRESS the new 26LH1DC3 4 5 Teaching usually takes 2 3 minutes After the TEACHING COMPLETE message is displayed press any button to return to the Clone menu then press ON OFF POWER or ENTER If finished detach M PI cable from the target newly cloned 26LH1DC3 4 5 Disconnect 26LH1DC3 4 5 Power for 15 Seconds Unplug the AC power cord of the newly cloned 26LH1DC3 4 5 from the power outlet for about 15 seconds to activate the newlycopied setup PLEASE WAIT N This display will appear during Teaching function TEACHING COMPLETE This display will appear after Teaching is complete Use the Installer s Menu to set up or change operational settings See more detailed descriptions of the Installer menu items on the following pages Accessing the Installer s Menu Make sure TV is on Installers menu items can be accessed by using an installer s remote control Just press MENU repeatedly at least 10 times until the TV seems to stop responding then press 9 8
68. n off if user held speaker channel button down for 2 seconds 078 UPN MSB UPN Most Significant Byte User programmable number most significant byte readable by M PI command Note Not linked to serial number 079 UPN MSB 1 UPN Most Significant Byte 1 User programmable number most significant byte 1 readable by M PI command Not linked to serial number 080 UPN MSB 2 UPN Most Significant Byte 2 User programmable number most significant byte 2 readable by M P command Not linked to serial number 081 UPN LSB UPN Least Significant Byte User programmable number least significant byte readable by M PI command Not linked to serial number 082 CHKSM ERROR Checksum Error Enforces rigid M PI checksum validation Set to 1 for validation Set to O to disable does not check checksum on M PI async port SPI is always checked 083 HANDSHK TIME Handshake Time Adds an additional delay to the handshake time which is 64 msec thus relaxing M PI timing requirements to be compatible with PC based Windows controlled systems range is O 5 Timeout 25 5MS 25 5 MS Handshake time 084 PERMANENT BLK Permanent Block Allows Lock Parental Control blocking schemes to be permanent by disabling the blocking hours function Set to 1 to install Parental Control restrictions permanently Set to O for user specified hours control of blocking schemes 087 REAR RGB EN Rear RGB1 Enable Controls
69. n setting the clock or the wake up alarm ONILLIS IWIL A 31 TIME SETTING ONILLAS AWIL Hl 32 Daylight Saving Installer can select to use Daylight Savings to adjust the clock time This is operated from the Automatic Time Settings Press the MENU button and then use the ADJ A or V button to highlight the Setup menu and press the OK Enter button 2 Use the ADJ A or Y button to the Time Press the OK Enter button to highlight Clock 4 Use the ADJ A or Y button to highlight the Daylight Saving and press the OK Enter button O Use the ADJ A or Y button to choose Yes or No When finished press MENU repeatedly to remove the menus Time Zone Settings Installer can set the Time Zone This is operated from the Automatic Time Settings Press the MENU button and then use the ADJ A or Y button to highlight the Setup menu and press the OK Enter button Use the ADJ A or Y button to the Time Press the OK Enter button to highlight Clock Use the ADJ A or Y button to highlight Time Zone and press the OK Enter button Use the ADJ lt or gt button to select the Time Zone and press the OK Enter button When finished press MENU repeatedly to remove the menus 11 20 PM Sep 11 2006 Sep 11 2006 11 20 PM Sep 11 2006 Sep 11 2006 DEW lel nl asr W 701 Time Zone On Timer Off Timer Auto Off Sea Time gt Time Zone
70. nnel Time display Channel Time display will not appear Set to O to enable the Channel Time display 069 EN CH T COL Enable Channel Time Custom Color Set to 1 to enable custom color for the Channel Time display Set to O to disable custom color for the Channel Time display 070 FOR CH TIME Channel Time Display Foreground Color Set according to Color Chart O Black 3 Yellow 6 Cyan 1 Red 4 Blue 7 White 2 Green 5 Violet Note If foreground and background colors are the same menu background is transparent 071 BCK CH TIME Channel Time Display Background Color Set according to Color Chart O Black 3 Yellow 6 Cyan 1 Red 4 Blue 7 White 2 Green 5 Violet Note If foreground and background colors are the same menu background is transparent 073 CH NOT AVBLE Channel Not Available If set to 1 and item 028 CHANNEL OVERRIDE is set to O NOT AVAILABLE message is displayed when directly accessing a channel not in the channel scan list available in memory 075 REVERT CH Revert to Start Channel If set to 1 and loss of M PI communication occurs TV automatically tunes to the specified Start Channel 077 QUICK SHUTOFF Allows TV power off to be controlled by the pillow speaker channel selection button User would press and hold button down for time required to have TV turn off Value Range O 17 each number represents 1 2 second For example if set to 4 TV would tur
71. oaxial Wire 75 ohm UHF Antenna i Signal a Amplifier VHF m To improve the picture quality in a poor signal area please purchase a signal amplifier and install properly m If the antenna needs to be split for two TV s install a 2 Way Signal Splitter a If the antenna is not installed properly contact your dealer for assistance NOTE P The TV will let you know when the analog cable and digital channel scans are complete a To prevent the equipment damage never plug in any power cords until you have finished connecting all equipment HD RECEIVER SETUP This TV can receive Digital Over the air Cable signals without an external digital set top box However if you do receive digital signals from a digital set top box or other digital external device refer to the figure as shown below When connecting Component cable 1 How to connect COMPONENT DVD DTV 1 ay Connect the video outputs Y PB PR of the digital set AUDIO IN VIDEO IN top box to the COMPONENT DVD DTYV 1 jacks on the set Match the jack colors Y green PB blue and PR red 2 Connect the audio output of the digital set top box to the COMPONENT DVD DTV 1 jacks on the set 2 How to use m Turn on the digital set top box Refer to the owner s manual for the digital set top box operation m Select Component input source by using the TV AV
72. ocassettes and for higher quality picture and sound from other A V devices A V DEVICE Any device that produces video or sound VCR DVD cable box or television AMPLIFIER An electronic device that amplifies sound from a television CD player VCR DVD or other Audio Video device ANTENNA The physical receiver of television signals sent over the air A large metal piece of equipment does not always have to be visible to be using an antenna CABLE Cable service box Refers to the descrambler box cable subscribers use to receive cable programming signals DVD cable box or television CATV Programming provided by a cable service DIGITAL TELEVISION High resolution cinema quality television signals transmitted digitally DVI Digital Video Interface Accommodates analog and digital interfaces with a single connector COMPOSITE VIDEO Typical video jack uses one wire for transporting three color video signals COMPONENT VIDEO Uses three wires for transporting three color video signals The end result is usually better video quality DELETED Lets you remove channels from the list that the end user can scroll through using CH Channel Up Down HDMI High definition multimedia interface HDTV High definition television Refers to television signals that have higher resolution than ordinary analog TV signals HDSTB High definition set top box Refers to a tuner device that receives high def
73. oise Reduction Mode Standard Color Temperature MEEGA Noise Reduction RJE Film Mode Color Tint LAP move P select lem Back Color Temperature Cool Screen Format Noise Reduction Film Mode E Color Temperature 11 20 PM Sep 11 2006 Screen Format Noise Reduct Norma loise Reduction VY col 07070 Film Mode Warm Quenu 104LNOD JN Lld E 49 PICTURE CONTROL TOYLNOD JYNLIId if 50 Manual Picture Adjustment To make custom picture settings set the Mode to Manual on the menu Use the Manual settings for the best presentation of movies The patient will then be able to view movies with more realism Press the MENU button and then use the ADJ A or V button to highlight the Picture menu and press the OK Enter button Use the ADJ A or Y button to highlight Mode and press the OK Enter button 11 20 PM a a a on a TIET Use the ADJ button to choose Manual and use ADJ A V lt P buttons to set your own settings for the options When finished press the MENU button When finished press MENU repeatedly to remove the menus 11 20 PM Sep 11 2006 Screen Format Adjustments The user can choose preset formats for the picture on analog channels Press the MENU button and then use the ADJ A or Y button to highlight the Picture menu and press the OK Enter button Use the ADJ A or button to highlight Screen Format and press the OK Ent
74. omewhat different from your TV There are several Vesa standard mounts available that can be used with this TV The mount shown to the right would be installed on the TV back using required bolts in the four pre threaded holes provided Follow any instructions supplied with the Vesa mount if one is to be used for the TV installation TV Swivel Stand Swivel Stand Typical Vesa The TV can be conveniently swiveled on its stand 30 to the left or right to provide optimum viewing angles Vesa Standard Mounting Holes NOILVYVda ud B EXTERNAL EQUIPMENT SETUP dNLIS LNIWdINOA TWNYILXI al 10 ANTENNA OR CABLE CONNECTION 1 Antenna Analog or Digital Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections For optimum picture quality adjust antenna direction if needed Multi family Dwellings Apartments Wall Connect to wall antenna socket Antenna Socket Outdoor RF Coaxial Wire 75 ohm Antenna VHF UHF Single family Dwellings Houses Copper Wire Connect to wall jack for outdoor antenna 2 Cable Be careful not to bend the bronze wire when connecting the antenna Cable TV Wall Jack c RF Coaxial Wire 75 ohm 3 Using both cable and antenna Antenna Diplexer RF Coaxial Wire 75 ohm Signal Combiner Cable TV Wall Jack RF C
75. optimum preset picture settings Press the MENU button and then use the ADJ A or Y button to highlight the Picture menu and press the OK Color Temperature E nte r button A picture Screen Format Noise Reduction Use the ADJ A or Y button to choose Film Mode and EE Ot press the OK Enter button Use the ADJ A or Y button to choose On or Off Cok menu When finished press the OK Enter button When finished press MENU repeatedly to remove the Mode menus Noise Reduction J oft Film Mode an Sep 11 2006 Menu _ TOYLNOD IYNLDId E 51 COMMERCIAL MODE INSTALLER OVERVIEW Following is the Commercial Mode Operation Setup LODGING PTC INSTALLER MENU Operating Installer Menu To set up the controls for the TV you will need to know how to enter 000 INSTALLER SEQ the 26LH1DC3 4 5 Installer menu and make changes to the default values as required If necessary familiarize yourself with the 26LH1DC3 4 5 Installer menu and how to make and save changes in the menu UPN 000 000 000 000 FPGA 09F1 PTC V1 00 000 CPU V1 01 00 Optional Installer Remote You will need an Installer remote control similar to the one shown to the i Typical Installer Menu right The TV s clonable features need to be set up before 2 5 5 Menu is done This is a critical step If the Master TV display panel s clonable features like Clock Set adding channel icons and channel labels etc
76. or operation Q NOTE gt When connecting with external audio equipments such as amplifiers or speakers please turn the TV speakers off gt p 46 A CAUTION gt Do not look into the optical output port Looking at the laser beam may damage your vision PC SETUP This TV provides Plug and Play capability meaning that the PC adjusts automatically to the TV s settings When connecting D sub 15pin cable 1 How to connect 1 Connect the RGB output of the PC to the PC IN jack on the set 2 Connect the PC audio output to the DVI PC AUDIO IN jack on the set 2 How to use Turn on the PC and the TV ma Select PC input source by using the TV AV button on the remote control When connecting HDMI to DVI cable 1 How to connect Connect the DVI output of the PC to the HDMI DVI IN jack on the set 2 Connect the PC audio output to the DVI PC AUDIO IN jack on the set 2 How to use Turn on the PC and the TV a Select HDMI input source by using the TV AV button on the remote control DVI PC AUDIO HDMVOY IN IN DVI PC AUDIO HDMI DVI IN IN Al DVI PC OUTPUT Q RGB OUTPUT AUDIO dNLIS LNIWdINOA IWNYILX a 19 EXTERNAL EQUIPMENT SETUP O NOTE gt To get the the best picture quality adjust the PC VIDEO menu until the picture is clear If the graphics car
77. r requirement Television System Program Coverage External Antenna Impedance Operating Temperature Operating Humidity Environment condition Storage Temperature Storage Humidity 27 01 x 22 0 x 9 97 inches 686 0 x 558 7 x 253 2 mm 33 95 pounds 15 4 kg AC100 240V 50 60Hz NTSC M ATSC 64 amp 256 QAM VHF 2 13 UHF 14 69 CATV 1 135 DTV 2 69 CADTV 1 135 75 ohm 32 104 F 0 40 C Less than 80 4 140 F 20 60 C Less than 85 79 LG Electronics Inc
78. red CAMPORT Operation PPV The operation will be similar to that of the Stand Alone mode However the PPV providers may send different commands to the TV for the same user commands For instance some providers will always send a direct tune command when it receives a channel up down or a flashback command while other PPV providers will just send a key command CAMPORT Front Video Functionality Control Item 34 Item 40 Front Video CAMPORT EN AUTO CAMPORT Operation 0 0 Disabled 0 1 Disabled 1 0 Selectable 1 1 Auto Sense Previous State Operation State State Before Inserting While CAMPORT Upon Removal CAMPORT Is Active Of CAMPORT Aux or RF Channel None Previous Aux or RF Channel Aux or RF Channel Direct Access Last Requested RF or Aux Channel Aux or RF Channel Ch Up Down Flashback and TV AV Keys Previous Aux or RF Channel Previous State Operation State Before Inserting While CAMPORT Upon Removal CAMPORT Is Active Of CAMPORT Aux or RF Channel None Previous Aux or RF Channel Aux or RF Channel Direct Access Last Requested RF or Aux Channel Aux or RF Channel Ch Up Down Flashback and TV AV Keys Last Requested Channel if PPV translates it to direct access tuning command Otherwise goes to Previous Aux or RF Channel JAGOW 1VIDYAWWOD a 67 COMMERCIAL MODE AGOW 1VIDYAWWOD i 68 PEFERENCE 26LH1DC
79. s 007 STRT VOLUME Start Volume This function allows the Installer to determine the initial volume level setting when the 26LH1DC3 4 5 is turned On This feature is useful for an in house information channel since the 26LH1DC3 4 5 would always select that volume level when it is turned On The range of values are O 63 255 If 255 is selected the current volume level will be retained in memory when the 26LH1DC3 4 5 is turned Off at turn On the volume level will be automatically set at the previous or last level JAGOW 1VIDYAWWOD a 008 MIN VOLUME Minimum Volume This function determines the minimum volume level allowable with the VOLUME VOL Up Down control In this way for example someone cannot set the volume too low to hear The value range is from 0 to 63 change values with AD Left Right arrow The factory default is O which provides the full range of volume control if item 009 MAX VOLUME is also set to 63 It may be best to set the same value on every 26LH1DC3 4 5 Note The minimum volume level cannot have a value setting higher than the MAX VOLUME level described below 009 MAX VOLUME Maximum Volume This function determines the maximum volume level allowable with the VOLUME VOL Up Down controls In this way for example someone can not set the volume level high enough to disturb others Continued on next page 59 COMMERCIAL MODE AGOW 1VIDYAWWOD A 60 Continued from prev
80. ser programmable number least significant byte 082 CHKSM ERROR 0 1 1 Enforces rigid M PI checksum 083 HANDSHK TIME O 5 5 Relaxes M P timing to be compatible with PC based Windows controlled systems 084 PERMANENT BLK 0 1 0 Removes block hours setting for Parental Control and makes block permanent 087 REAR RGB EN 0 1 1 Enables RGB1 input Set to 1 to enable set to O to disable 088 EN NOISE MUTE 0 1 1 If set to 1 mutes audio if no signal is present 090 KEY LOCK 0 1 0 If set to 1 keyboard is locked out IR is still functional 091 YPrPb2 EN 0 1 1 Set to 1 to enable Component 2 input jacks 092 RGB2 ENABLE 0 2 2 Enables Video 3 input Set to 1 for Composite Video or 2 for S Video Set to 0 to disable 093 RJP AVAILABLE 0 1 0 Set to 1 to enable 094 SAP MENU EN 0 1 1 Set to 0 to disable feature on Function menu Set to 1 to enable feature on Function menu 096 DEF ASP RATIO 0 1 2 4 5 2 Sets default aspect ratio at power up See detailed descriptions and item 106 102 ATSC BAND O 4 4 Selects ATSC band 103 ATSC TUNE MODE 0 1 1 Sets ATSC tuning mode Set to O for virtual channels set to 1 for physical channels 104 START MINOR CH 0 255 0 Selects Minor start channel Set O for NTSC Not O sets Minor channel number 106 ASP RATIO LOCK 0 1 0 To retain set aspect ratio on power cycle set to 1 Set to O for default ratio on power cycle 107 BANNER SELECT N A N A Not applicable 116 VIDEO MUTE EN 0 1 0 Set to O for normal set to 1 for Blank
81. sing the remote control This NO is the PIN Each time the menu is entered the Seni Ae password will be required until the block time expires The TV is set up with the default password 0 0 0 0 E ngin Use the ADJ A or Y button to highlight Changing PIN e t 2 and press the OK Enter button Enter the digits password Bee As soon as the 4 digits are entered re enter the same item e E 4 digits on the Confirm PIN AY Move Cok Select menu Back 8 When finished press MENU repeatedly to remove the menus On Off Changing PIN New PIN eae Confirm PIN E NOTE 11 20 PM gt If you ever forget your password key in 7 7 7 7 on Sep 11 2006 the remote control SONILVY TIOULNOD TVLNAUVd E 35 36 SONILVY TOULNOD TVLNAUVd U PARENTAL CONTROL RATINGS Set Block Hour Press the MENU button and then use the ADJ A or Y button to highlight the Setup menu and press the OK Enter button Use the ADJ A or Y button to highlight V Chip and press the OK Enter button 3 Enter the 4 digits password Hour and press the OK Enter button Use the ADJ A or Y button to choose 1 12 hours and press the OK Enter button When finished press MENU repeatedly to remove the menus Use the ADJ A or Y button to highlight Set Block 11 20 PM Sep 11 2006 11 20 PM Sep 11 2006 ime Menpe SE Menu Language Language Changing PIN
82. suggested Children under 13 should be accompanied by an adult NC 17 Not classified Viewers should be 17 or older X Adults only e MPAA ratings The selected rating will be locked In addition any ratings that are more restrictive will also be blocked 11 20 PM Sep 11 2006 11 20 PM Sep 11 2006 11 20 PM Sep 11 2006 SetiD Can English Ratin Can French Rating D L Rating aY lt gt move Cok select renu Back Canadian English Ratings Press the MENU button and then use the ADJ A or Y button to highlight the Setup menu and press the OK Enter button Use the ADJ A or Y button to highlight V Chip and press the OK Enter button Enter the 4digits password Use the ADJ A or Y button to highlight the Can English Rating and press the OK Enter button O Use the ADJ A V lt P buttons to choose and set up the menu options for Can English Rating When finished press MENU repeatedly to remove the menus Canadian English Ratings E Expect No restriction C Children C8 Viewers should be 8 or older G General Audience PG Parental guidance suggested Children under 14 should be accompanied by an adult 14 Restricted Viewers should be 14 or older 18 Restricted Viewers should be 18 or older Canadian French Ratings Press the MENU button and then use the ADJ A or V button to highlight the Setup menu and press the OK Enter button Use
83. t Mode POM AY Select Weru Bak Automatic Volume Control Settings Have the TV automatically maintain the sound level between different channels Press the MENU button and then use the ADJ A or Y button to highlight the Sound menu and press the OK Enter button Use the ADJ A or Y button to highlight Auto Volume and press the OK Enter button 3 Use the ADJ A or Y button to choose On or Off 4 When finished press MENU repeatedly to remove the menus Analog Audio Settings You can set analog audio settings Press the MENU button and then use the ADJ A or V button to highlight the Sound menu and press the OK Enter button Use the ADJ A or Y button to highlight Multi Track and press the OK Enter button Use the ADJ A or button to choose Mono Stereo or SAP and press the OK Enter button When finished press MENU repeatedly to remove the menus 11 20 PM Sep 11 2006 11 20 PM Sep 11 2006 Sep 11 2006 Mode Balance Digital Output Output Auto Volume On gt Internal Speaker Auto Volume Multi Track Menu Balance Digital Output Auto Volume Multi Track Stereo Internal Speaker COK_ Select Menu Multi Track Internal Speaker o Back TOYLNOD JDVNONVI 8 ANNOS a 45 SOUND amp LANGUAGE CONTROL TOYLNOD JDVNONVI B ANNOS a 46 Digital Audio Language Settings You can set digital audio
84. t work Procedure interrupted Wait until procedure complete message is displayed XIGN4dddV E Different TV models Cloning is only possible with identical model TVs Step s omitted or not performed Reread 54 55 56 pages to be sure all tasks were performed Insufficient cloning time Redo cloning and be sure learning teaching time is about 1 min and 5 to15 seconds 75 seconds Cloning erratic Reset Clone Programmer Clone time disappeared Batteries were removed Batteries must remain installed to retain time settings New Setup not present 26LH1DC3 4 5 not reset Disconnect newly cloned unit from power for 5 seconds e After cloning operations are complete just unplug the LT2002 from the 26LH1DC3 4 5 e If the 26LH1DC3 4 5 does not display a picture on the TV blank screen after a few seconds just change channels 72 Controller Quick Connected to AC Power DTV Board Blinking 1 Bad PPV Board 2 Bad DTV Board Cycle the power by removing and re connecting the AC power cord Observe the POWER LED and TV screen as soon as AC power is re applied DTV Board POWER LED Turn On lomentarily 2 Did TV Turn On Momentarily No Check to see if TV is in Commercial Mode See Commercial Mode Check chart Plug into AC Power Outlet CLONE TROUBLESHOOTING FLOW CHART Press POWER or ON OFF key on TV
85. te the labels menu When the label is highlighted you want for the channel shown in the screen and press OK Enter button to add the label to the channel O Select the next channel to label with Channel A or V button to or if finished channel labeling When finished press MENU repeatedly to remove the menus PERU MCE lt gt CH 8 Change Ch Co AddiDelete Unstable Screen If a dashed line or no color appears the screen is unstable therefore try channel adjustments This is only available for analog broadcasting Press the MENU button and then use the ADJ A or Y button to highlight the Channel menu and press the OK Enter button Use the ADJ A or button to highlight Fine Tune and press the OK Enter button 3 Press the ADJ lt or gt button to adjust When finished press MENU repeatedly to remove the menus Checking the Strength of the Digital Signal This shows the current digital signal strength as a picture This is only available for digital broadcasting Press the MENU button and then use the ADJ A or V button to highlight the Channel menu and press the OK Enter button Use the ADJ A or Y button to highlight Signal Strength and press the OK Enter button View the on screen signal strength monitor to see the quality of the signal being received When finished press MENU repeatedly to remove the menus Auto Program Channel Label
86. ter 26LH1DC3 4 5 MPI Port If there is a good connection THE CLONE HAS CONTROL OF TV message will appear Press any button on the Installer remote Learn Setup from Master 26LH1DC3 4 5 Press 1 to select the LEARN FROM TV option then press ON OFF POWER or ENTER to go to the Memory Bank Selection Menu Pick the Memory Bank you want to store the master 26LH1DC3 4 5 s setup in by pressing either Channel button repeatedly to choose Memory 1 2 or 3 If you choose a Memory Bank that has a master device s setup programmed into it that setup will be overwritten by the new master 26LH1DC3 4 5 s setup Once the Clone memory bank is selected press ON OFF POWER or ENTER The Clone memory bank you have selected will be shown Press ON OFF or POWER to begin copying the master 26LH1DC3 4 5 s setup Set the Clock Optional Set the time on a Master TV s Clock If the time has already been copied from a TV into the Clone programmer you can set a master TV s clock by copying the time from the Clone programmer The Clone Programmer can copy the current time to both a master TV and to the Clone s internal clock accurate to within one minute Another reason that the Clone programmer should be equipped with fresh high quality alkaline batteries is for it to keep the time as accurately as possible Since the Clone Programmer s time cannot be set directly the current time needs to be copied from a LG TV equipp
87. ter out port on the computer 2 Connect a computer cable between the computer and PC In on the TV 3 Make PC Audio connections as indicated to the right After all connections have been made select the PC source to display the PC image on the TV 22 Back of Computer Computer Output DVI PC AUDIO HDMI DVI IN IN 9 UPDATE IGTAL AUDIO OUT OPTICAL UPDATE DIGTAL AUDIO OUT OPTICAL WATCHING TV CHANNEL CONTROL USER REMOTE CONTROL BUTTON FUNCTIONS A brief list of the buttons on the optional user s remote and what they do MUTE Turns sound Off and On while the picture remains TV AV Displays a menu of all available input sources POWER POWER Turns TV On or Off CH TV AV PREVIEW GUIDE SAP Selects MTS sound Mono Stereo and SAP in analog mode Change the audio language in DTV mode CHANNEL PREVIEW Displays available TV channels and if active the Guest Parental Control menu set V Chip blocks to restrict both analog and digital programming e Aux Channel allows the guest to select the Audio Video inputs Use the A V jacks on the back of the TV as a source INFO Check the current program information screen status multi sound status and time Press with Guide onscreen for more Program information BUTTON When selecting a digital broadcast channel
88. the ADJ A or Y button to highlight V Chip and press the OK Enter button 3 Enter the 4digits password Use the ADJ A or Y button to highlight the Can French Rating and press the OK Enter button O Use the ADJ A V lt P buttons to choose and set up the menu options for Can French Rating When finished press MENU repeatedly to remove the menus V Chip Menu Language Language Menu Transparency Transparency Please Enter your PIN Menu Language On Off Changing PIN Set Block Hour SONILVY TIOULNOD TVLNAUVd E MPAA Rating Can English Rating Can English Rating 11 20 PM Can French Rating Sep 11 2006 1 g Cok _ menu Canadian French Ratings E Expect No restriction G For all 8 Restricted Viewers should be 8 or older 13 Restricted Viewers should be 13 or older 16 Restricted Viewers should be 16 or older 18 Restricted Viewers should be 18 or older 39 PARENTAL CONTROL RATINGS SONILVY TOULNOD TVLNAUVd E 40 a Lock menu Downloadable Rating in the CD manual is added by the information presented here Your TV s OSD On Screen Display may differ slightly from what is shown in this manual Downloadable Rating Press the MENU button and then use the ADJ A or Y button to highlight the Setup menu and press the OK Enter button Use the ADJ A or Y button to highlight V Chip and press the OK Enter button 3 Enter the 4 digits password
89. to respond to MENU key presses Then press 9 8 7 6 OK Enter Select LODGING PTC INSTALLER MENU 000 INSTALLER SEQ UPN 000 000 000 000 FPGA 09F1 PTC V1 00 000 CPU V1 01 00 Typical Installer Menu AGOW 1VIDYAWWOD A 66 PEFERENCE 26LH1DC3 4 5 Camport Auto Sense Operation The CAMPORT Auto Sense function is enabled when 1 Installer Menu Item 34 CAMPORT EN is set to 1 AND 2 Installer Menu Item 40 AUTO CAMPORT is enabled 1 Selectable Can be accessed with TV AV key direct access etc Auto Sense Switches to this input when connector is inserted The camport Front Video has the highest priority and will override any commands including tuning to the Start Channel CAMPORT Operation Stand Alone When Camport Auto Sense is enabled as above the TV s source will switch to the front video whenever a plug is inserted into any of the front panel video inputs either composite Video or S Video When the plug is removed the TV will switch back to the Previous channel or input source that the TV was using before the Plug was inserted However if any direct access to an RF channel or Aux channel is requested while the camport is active then when the camport plug is removed the TV will switch to the last requested channel Source changes using any Source Keys TV AV are ignored Channel Up Channel Down and Flashback Commands are not direct access tuning commands and they are also igno
90. uction eee 51 Film Mode Options 51 COMMERCIAL MODE Installer Overview e eee 52 Commercial Mode Setup 0 53 Cloning Connections Learning Setup 54 Clone Programmer Learning Setup 55 Cloning Connections Teaching Setup 56 Installer Menu 0 cece eee 58 Peference sitoi niie iiaiai taeerp ad and 63 APPENDIX Troubleshooting eee 69 Cloning Procedure Troubleshooting 71 Clone Troubleshooting Flow Chart 73 TV Operating Check 0 eeee 74 Glossary of Terms 0 00 sees 75 Installer Quick Setup Guide 76 NOILVYVd4d dd E PREPARATION ACCESSORIES Ensure that the following accessories are included with your product If an accessory is missing please contact the dealer where you purchased the product User must use shielded signal interface cables with ferrite cores to maintain standard compliance for the product CD Manual cd Installer Remote Control Batteries Batteries Optional User Remote Control Power Cord Optional Installer Remote Control for Model No Series 26LH1DC3 4 5 Shown herein is an optional Installer remote control available for the 26LH1DC3 4 5 models only The installer remote control is NOT included with t
91. umber Press the MENU button and then use the ADJ A or Y button to highlight the Setup menu and press the OK Enter button Use the ADJ A or Y button to highlight Set ID and press the OK Enter button 3 Use the ADJ A or Y button to adjust Set ID to choose the desired monitor ID number When finished press MENU repeatedly to remove the menus Sep 11 2006 PICTURE CONTROL PRESET PICTURE SETTINGS Picture Preset Set the picture mode to the program content e g Dynamic or Mild etc Press the MENU button and then use the ADJ A or Y button to highlight the Picture menu and press the OK Enter button Use the ADJ A or Y button to highlight Mode and press the OK Enter button Use the ADJ button to choose a preset picture setup When finished press the OK Enter button When finished press MENU repeatedly to remove the menus Color Temperature Settings Choose one of three automatic color adjust ment Press the MENU button and then use the ADJ A or Y button to highlight the Picture menu and press the OK Enter button Use the ADJ A or Y button to choose Color Temperature and press the OK Enter button Use the ADJ A or Y button to choose Normal Cool or Warm When finished press the OK Enter button 4 When finished press MENU repeatedly to remove the menus 11 20 PM Sep 11 2006 Mode Standard Color Temperature Screen Format N
92. ved by the party responsible for compliance could void the user s authority to operate the equipment THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE LG Electronics U S A Inc 2000 Millbrook Drive TELEPHONE NO 1 847 941 8000 CAUTION WARNING Do not attempt to modify this product in any way Apparatus shall not be exposed to dripping or without written authorization from LG Electronics splashing and no objects filled with liquids such as Corporation vases shall not be placed on the apparatus Unauthorized modification could void the user s authority to operate this product CAUTION CAUTION When used outside of the U S it may be used HAR cord with fitting of an approved agency is employed THESE SERVICING INSTRUCTIONS ARE FOR USE BY When used outside of U S other power supply cords QUALIFIED SERVICE PERSONNEL ONLY TO REDUCE may be used if the cord is approved by the local THE RISK OF ELECTRIC SHOCK DO NOT PERFORM regulating agency ANY SERVICING OTHER THAN THAT CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO CLEANING AND DISINFECTION Clean the exterior of this television by removing dust with a lint free cloth CAUTION To avoid damage to the surface of the television do not use abrasive or chemical cleaning agents IMPORTANT SAFEGUARDS FOR YOU AND YOUR NEW PRODUCT YOUR PRODUCT HAS BEEN MANUFACTURED AND TESTED WITH YOUR SAFETY IN MIND HOWEVER IMPROPER USE CAN RESULT IN POT

LG 26LH1DC3 User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents