Lexmark X342 User's Manual
Contents
1. Start to resume printing assembly exposed to direct light for an extended period of time Extended light exposure can cause 202 Paper Jam print quality problems CAUTION The fuser area is hot Avoid contact 3 Remove the jammed paper by gently pulling it with the fuser area to prevent burns Straight out 1 Open the rear cover 2 Remove the jammed paper by gently pulling it 3 Insert the paper tray straight out 4 Press Start to resume printing Note If you receive a 241 18 paper jam at the start of a print job verify that the media settings match the acutal media size 3 Close the rear cover 4 Press Start to resume printing 241 242 Paper Jam 1 Open the appropriate paper tray 251 Paper Jam 1 Remove the jammed paper by gently pulling it straight out of the MFP 2 Remove the jammed paper by gently pulling it straight out 2 Press Start to resume printing 290 291 292 Scanner Jam 1 Open the ADF top cover 2 Remove the jammed paper by gently pulling it straight out 3 Close the ADF top cover and then load the documents back into the ADF Note To prevent document jams use the scanner glass rather than the ADF for thick thin or a mixed set of documents 4 Press Start to resume2. Lexmark X342 Clearing Jams Guide Avoiding jams The following hints can help you avoid jams Use only recommended print media Do not overload the print media sources Make sure the stack height does not exceed the maximum height indicated by the stack line on the labels in the sources Do not load wrinkled creased damp or curled print media Flex fan and straighten print media before you load it If jams do occur with print media try feeding one sheet at a time through the multipurpose feeder Do not use print media that you have cut or trimmed yourself Do not mix print media sizes weights or types in the same print media source Make sure the recommended print side is loaded in the source according to your simplex or duplex needs Keep print media stored in an acceptable environment Do not remove trays during a print job Push all trays in firmly after loading them Make sure the guides in the trays are properly positioned for the size of print media you have loaded Make sure the guides are not placed too tightly against the stack of print media Clearing Jams 200 201 Paper Jam CAUTION The fuser area is hot Avoid contact with the fuser area to prevent burns 1 Press the access button on the left side of the 4 Reinsert the print cartridge assembly MFP and open the front cover 4 2 Pull on the handle to remove the print cartridge assembly Warning Do not leave the print cartridge 6 Press
Download Pdf Manuals
Related Search