Kupa X15 Quick Start Guide
Contents
1. the life of the camera circuitry Protecting X15 body Avoid place X15 on top of hard objects to prevent abrasions or dents Do not block ventilation vents on the back and the side of X15 Avoid to lay the tablet KUPArecommend using special stand Cleaning and maintenance Please follow below steps before performing any cleaning or maintenance Step 1 Turn off the power remove the connected power adapter and any externally attached devices and cables Step 2 Blow dust out of ports and openings Step 3 Use a soft cloth to wipe the surface of the tablet Be careful not to allow any water or cleaning agent inside X15 Step 4 Only turn on X15 when it is completely dry Please note If X15 hasn t been used for an extended time we recommend running touch screen calibration in Windows control panel again 3 Others SIM card overheating 3G version It is normal for SIM card generates heat when working Mobile Phone Using mobile phone can affect the audio system of the tablet but not the operation the tablet KUPA recommends users to keep a minimal 30cm distance between the mobile phone and tablet CPU Performance CPU performance of the tablet may vary in the following conditions Externally attached devices Number of opened programs Abnormal air pressure or temperature level X15 may attempt automatic shutdown to protect itself EMC compatibility X15 applies to the EMC environment for civil use business and light industr2. prevent dust and impact to happen Please do not overload the bag to prevent the display screen from bending 3 Take power adapter and user manuals along for extended trip 2 Daily Maintenance KUPA X15 is high precision equipment please be careful when handling and avoid any incorrect operation in humid or sandy condition Maintenance of touch screen Due to its crystal glass structure the LED touch screen is the most vulnerable part ofX15 Oniy use Kupa X15 pen and fingertips on X15 s touch screen DO NOT use other sharp objects or market to write on the touch screen or use excessive force DO NOT place any objects on the screen Place X15 in the protective case or backpack when traveling with it Do not put too many stuff between the backpack and the LCD display screen to avoid crushing The surface of the LCD will attract dust due to static so the user is recommended to buy LCD cleaning cloth to clean the LCD screen DO NOT use general cleaning agents to clean the LCD screen only use clean agents that are specifically made to clean LCD screen Avoid having water on the internal LCD screen and wipe any water off immediately from X15 Camera Lens Care To ensure clarity of pictures and videos please wipe away dirt and fingerprints offthe lens cover Only use soft cotton clothes for wiping no hard objects or abrasive chemicals shall be used Do not use the camera for an extended time the heat generated from overuse may shorten
3. 244mm KUPA X15 Specification Notice There are several KUPA X15 models with different configurations Specific configuration will be subject to the certain models Please consult your vendor for most up to date product information 1 Open packing X15 box contents listed in the table Any changes on specification configuration system components optional parts will be without prior notice Please refer to the standard model X15 Tablet 1 Standard Power Adapter amp Connector 1 Standard Removable Battery 1 Standard Digitizer Holder amp Charger 1 Standard KUPA Warranty Card q Standard 2 Check package contents Please check and make sure all items you get in good condition If any items are missed or the package box is damaged please contact your seller immediately Front Camera USB3 0 HDMI port Reset Button Microphone Audio port 3 5mm Sim Card Slot y Volume Control Brightness Control k Multifunction Key Air Intake Vent Power Button Air Blowout Vent Rear Camera Battery Lock J If user can change audio volume by pressing the Volume Control up or down User can also change screen brigtness level by holding multifunction key and press Volume Control up or down 3 Select PPPOE and input password then click connect button 4 Input ADSL ID and password then click complete Windows did not detect any networking hardware User name Broadband PP
4. 3G Buetooth Wi Fi supports 802 11B G N Bluetooth 4 0 3G optional CDMA2000 WCDMA TD SCDMA Wired connection Connect to a network using a RJ45 network cable if user installs an USB Ethernet adapter Sensor G Sensor Light Sensor Gyroscope GPS optional Camera Front 1 3MP 720P 30f s Rear 5 0MP 720P 30f s Battery and Power 45WHr swappable lithium ion polymer battery Battery life up to 7 hours Power Supply 100 240V 50 60Hz 1 0A Max Power Output 19 0V 2 1A Ports 2 USB 3 0 1 HDMI 3 5 mm Headset Jack for both audio out and microphone in SIM slot Copyright and Declaration Copyright This manual is published by KUPA AMERICA Company with all rights reserved Under the copyright laws this manual cannot be reproduced in any form without the prior written consent Trademarks The product names and trademarks covered in this manual are only for illustrative purposes All other brand and product names are trademarks or registered trademarks of their respective companies Damage Waiver KUPA is not responsible damages caused by natural disasters intentional or unintentional negligence third party misconduct user accident or other abnormal conditions KUPA is also not responsible for damages caused by non compliance with this instruction manual or unintended uses that is not of the X15 original product design
5. PoE Connect using DSL or cable that requires a user name and password _ asswor C Show characters Remember this password ing a dial up modem or ISDN Connection name Broadband Connection 9 C Allow other people to use This option allows anyone to this computer to use this connection show connection options that this computer is not set up to use Additional Information 1 Front Rear Camera Both cameras have AF function support 720P 30f s video capture best shooting distance is within 1 5m 2 HDMI output HDMI port allows transmission of video and audio signals up to 1080P to other devices such as LCD TV projector etc X15 supports two USB 3 0 ports with speed up to 5Gbps and be downward compatible with USB 1 1 USB 2 0 Please note If the external device does not support USB 3 0 it will not reach 5Gbps Ldon t have an ISP Connect Cancel 4 Pen and digitizer The pen can inserted into the digitizer and attached on any side of the tablet It is portable 4 1 Oerate pen Please refer to the user manual for pen in box Press the button of the pen to start it When the pen is close to the screen it will appear an induction point on the screen 4 2 Announcement for operating pen The pen comes with a built in battery it can be charged by USB charger If the pen doesn t work please check to see the battery is charged The indicator will flash red when power is low Please make the pe
6. actory To start manual calibrating please refer to the following steps 1 Go into Control Panel select Hardware 2 In Tablet Setting select Pen and Touch and Sound TEE CFE EE Realtek HD Audio Manager 3 Select Calibrate 4 Select Pen or Touch Input Display Other Configure What type of screen do you want to Configure your pen and touch displays calibrate Display options Display 1 Mobile PC Display Pen input Details Pen and Limited Touch Support Touch input Calibrate Choose the order in which your screen rotates Go to Cancel Orientation 5 During calibration process please click the center of the cross line once it presents Please do not change the screen orientation before the calibration is completed If use wants to exit calibration please press ESC button Note This means user cannot exit calibration without connecting a keyboard or docking In this case we recommend finish Calibration and then reset To provide calibration samples tap the crosshair each time that it appears on the screen Right click anywhere on the screen to retum to the last calibration point Press the Esc button to close the tool Do not change your screen orientation until you have completed the calibration process To use X15 outdoor KUPA recommends 1 Make sure that the battery is full 2 Place X15 inside of the protective case or the holster to
7. le optional KUPA can create customized external module for X15 based on specific client use Both right side and left side of the tablet have latches that can be used to attach modules Examples of modular functionalities are barcode scanner Id card reader IC card reader etc Please contact KUPA for further information Troubleshooting 1 Easy way for troubleshooting The tablet went through strict quality control before shipping out of the factory Some issues may arise to incorrect operation or shipping damages Please first refer to the following section to solve issues you are experiencing If problem persists please contact KUPA service on www kupaworld com for further support How to force X15 to power off in case X15 becomes unresponsive Press and hold the power button for 3 4 second to perform force shutdown X15 will not boot after power button is pressed Battery may be drained Please check the battery signal connect the power adapter and try again Please Make sure power adapter connection is plugged in correctly and securely Use may want to disconnect all the external devices before trying again What to do If water got into the X15 Don t power on X15 or that will cause more serious damages Remove as much water out of X15 as you can and find a soft cloth or dry tissue to wipe off the water gently be cautious not to damage the display screen surface Then use an electric fan blowing at low speed to dry X15 off a
8. n touch the screen first and then use your wrest to press on the screen and write The pen can work normally when the indicator lights in blue 4 3 Right click Press and hold the screen till a circle appears then release the finger from the screen and a shortcut menu should display on the screen 4 4 Handwriting This tablet supports dual input you can write and mark with pen on Microsoft OneNote word Excel PowerPoint Outlook PDF including Text diagram picture drawing and figure Click drawing and select size of the tip you can write on OneNote like using a real pen As shown below MeOom OneNote one place for all of your notes OneNote HOME INSERT DRAW HISTORY REVIEW VIEW HG Y Yee OP SSS Type Lasso Eraser Al A A A 4 Color amp Drawwith An y Y INA AA IA AY z Sh Ah Select Thickness Touch Tools Shapes CowPeritor analy ss 458mm ELL Installation Follow the direction shown in plug digitizer holder into the X15 side To secure the holder slide it downward to secure as shown in To lock holder slide the switch on top of X15 as shown in To remove the holder simply operating in reverse of the installation From 3 Connect power cable Ways to proper power the tablet 1 Connect the cable from the power adapter to the connection adapter 2 Connect the connection adapter to the socket of the tablet that is right under the Windows button Please make sure
9. nd try booting If X15 still does not boot contact customer service immediately Battery life is too short Check to see whether the battery is fully charged Check to see whether the battery hasn t been used for a long time after fully charged if so please re charge it before using Due to the chemical feature of the charged battery the battery life may start to slowly reduce after several charges To recondition battery please completely run down the battery and fully recharge it Please follow the battery maintenance instruction in this manual For additional question please visit www kupaworld com Please note that if the packaging or shipping box was damaged please do not use it to pack the tablet for shipping handling to avoid any damage 1 When using the tablet PC outdoors 1 3 Quick Sleep Wakeup When the system is running press the power button for one second to enter standby wake up mode If user needs to set remove password to wake up including fingerprint login please go to control panel and select power option to change settings 1 4 Charging Normally the system will alert user to recharge when the battery level falls under 10 It will alert again under 7 The system will go into sleep when the battery level drops below 5 We recommended user recharge the battery if the tablet has not been used for more than 3 months 1 5 Touch screen calibration The screen has been calibrated before out of the f
10. t properties click driver then update driver choose a specific location disk symbol folder to place the drivers then select the driver and follow the prompt to operate 3 Networking 3 1 connect to Internet X15 can connect to the Internet through Wi Fi or 3G wireless network 3 2 Wi Fi connection 1 Click on at the lower right corner 2 Select the target Wireless Access Point click connect hs 3 3 wired connection X15 is also capable of connecting to a network using a RJ45 network cable if user installs an USB Ethernet adapter PPPOE network connection ADSL is a popular way to connect to Internet 1 Click networking and internet in control panel 2 Click to set new connection or networking and select to connect to Internet System Configuration Note Please contact with KUPA to confirm the configuration Parameter Operating System Microsoft Windows 8 Standard Configuration Some model may be have customized OS installation CPU Intel Ivy Bridge i3 i5 i7 dual core mobile processors ULV Chipset Intel HM77 Series Display 10 1 IPS ratio of 16 10 resolution 1920x1200 Dual Input System Support 10 points multi touch Digital stylus Electromagnetic based input offering pin point accuracy Stylus 60 tile sensitivity 1g pressure sensitivity Graphics cores Intel HD 4000 System Memory 2G 4GB 8GB Solid State Storage 32GB 64GB 128GB SSD Wirless Wi Fi
11. the small triangle icon the connector face upward to user 3 Plug the power cable to electric outlet with 220V AC the battery icon on top right corner of the screen will light up 4 Boot up A quick press onthe power button at top right side of the tablet will boot up the tablet The battery indicator should light up and then system starts Please note When you boot up X15 please do not force to shut down the tablet halfway till the system is completely boot up Failure to do so may cause damages to Operating System KUPAX15 User Manual Notice For user manual of Window 8 please check the information from our website www kupaworld com Operation Manual 1 Express Setup 1 1 Boot Up Press the power key for 2 seconds to start the tablet 1 2 Shutdown Restart Slide out the start menu Charm from the right side of screen Click on Setting choose Power to Shutdown Restart Example on OFFICE2013 Word Build new Word write in the edition area Mus 00a Dounant Word rmx PBT ove sr orson pace avout REFERENCES MALINGS REVIEW VIEW sonn A D R MY4V444 e Objects set AAA A eed A g ree To write and draw with pen on Daily Note In windows Note you can use Tablet PC to write note with handwriting 5 Sensor The X15 typically comes with G Sensor Ambient Light Sensor and Gyroscope Individual model may be modified to suit local market please check with your vendor 6 Multifunctional Modu
12. y Operating temperature Operating temperature 32 to 104 F 0 to 40 C Please ensure x15 is running or stored within this temperature range to avoid any instability or damage 6 Click Yes to save data after calibration completed 1 6 Setting display resolution Please use recommended display resolution In situation where user need to change resolution please use control panel or follow instruction in Addition Information sec 4 3 1 7 Adjust display orientation This tablet comes with G sensor It will automatically adjust the display orientation accordingly for optimal view If you want to prevent system from automatically changing screen orientation please click control panel select adjust screen resolution then click orientation to set display orientation 2 Drivers 2 1 Default Device Driver KUPA has installed all necessary drivers You don t need additional installation Please note The tablet has been optimized on driver for hardware feature KUPA does not recommend users to update or install non official updated driver Any improper operation is taken at user s own risk and may void warranty 2 2 Install Update Driver 1 The official driver may contain Setup exe file Please dual click to operate default installation 2 If without Setup exe file please long press computer icon then click properties to select device management Right click the device and selec
Download Pdf Manuals
Related Search