Kompernass A1 User's Manual
Contents
1. Fill the skins with sausage meat as de tailed see chapter Preparing sausage and make sausages of ca 25 cm in length Grill the sausages well and eat them on the same day Biscuits Ingredients 125g Butter 125g Sugar 1 Packet of Vanilla sugar 1 pinch Salt 1 Egg 1 Egg white 250g Plain flour 1 Tbsp Baking powder Scraped peel of half a lemon Beat the butter until foamy Add the sugar vanilla sugar lemon peel and the eggs Mix the flour baking powder and salt and with a mixing spoon stir it into the mixture Allow the pastry to stand for ca 30 minutes in the refrigerator Then pass it through the meat grinder with the biscuit attachment fitted Lay the biscuits on a baking tray lined with baking paper Bake the biscuits in a pre heated oven at 180 C for ca 10 15 minutes until golden brown2. If the power cable is damaged or the accessories are visibly damaged e Immediately switch the appliance off by pressing the OFF button e If there is no risk to personal safety unplug the appliance e Arrange for the defective parts be repaired by Customer Services before re using the appliance 8 Cleaning A Warning Pull out the plug from the socket before cleaning the appliance In this way accidents caused by the unexpected switching on of the machine and electric shocks can be prevented a Cleaning the motor block e Clean the exterior surfaces and the power cable with a slighly damp cloth Dry the appliance well before re using it W Warning Never immerse the motor block in water or any other liquid Should this occur you are at risk of a potentially fatal electric shock if permeating moisture makes contact with the electrical wiring e Never use detergents abrasive cleaners or sol vents These could damage the appliance and leave residues on the foodstuffs b Cleaning the accessories Note Do not clean the accessories in a dishwasher This could cause damage to them e Clean the accessories that could come in contact with foodstuffs by hand only the accessories are not dish washer safe with hot water and a household detergent suitable for use with foods A Caution The cross blade is very sharp Risk of injury e Dry all parts thoroughly before re using the appliance
3. be trapped or clamped e Arrange for damaged power cables and or plugs to be replaced as soon as possible by a qualified specialist or by Customer Services e Use the appliance only in dry rooms not outdoors e Never immerse the motor in water or other liquids If you do you risk receiving a potentially fatal electric shock A Warning Never use the appliance for purposes other than those listed here There will be a major risk of serious accidents should you try to neutralise the safety devices on the appliance AA To avoid the risk of accidents and injuries e Never put your hand into the openings of the ap pliance Do not insert any objects of any kind into the openings except for the appropriate stodger and the foodstuff to be processed If you do there will be a serious risk of accidents e Unplug the appliance from the power source be fore attaching or removing accessories e Do not leave the appliance unsupervised when it is ready for use To avoid it being switched on accidentally always unplug the appliance after use or during breaks e Use only original accessories for this appliance Other accessories may not meet the safety requirements This appliance is not intended for use by individuals including children with restricted physical physio lo gical or intellectual abilities or deficiences in experience and or knowledge unless they are supervised by a person responsible for their safety or receive fr
4. Note After every cleaning apply a light coating of cooking oil to all metallic components 9 Storage e Push the power cable but not the plug into the cable storage shaft under the appliance base There it is protected from damage Store the two cutting discs that are not currently fitted into the appliance in the small compartment Fig on the appliance e Store the appliance in a dry place e After drying the metal attachments coat them lightly with a little cooking oil if you are not go ing to use the device immediately This will pro tect them from corrosion Store the appliance where it will be out of reach of children and people requiring supervision They are not always able to correctly assess the potential risks involved with using electrical appliances 10 Disposal R Do not dispose of the appliance in your normal domestic waste This appliance mum is subject to the European Guidelines 2002 96 EC Dispose o the appliance through an approved dis posal centre or at your community waste facility Observe the currently applicable regulations In case of doubt please contact your waste disposal centre Oe Dispose of all packaging materials in an environmentally friendly manner 11 Warranty and service The warranty for this appliance is for 3 years from the date of purchase The appliance has been ma nufactured with care and meticulously examined be fore delivery Please retai
5. SILVER CREST 6 0 Mincer SFW 250 A1 Mincer Operating instructions KOMPERNASS GMBH BURGSTRASSE 21 D 44867 BOCHUM www kompernass com ID Nr SFW250A1 09 10 V1 IAN 62025 SFW 250 Al Content Page 1 Intended use 2 Technical data 2 2 Technical data 3 ltems supplied 2 4 Safety Instructions O 2 3 5 Assembly Disassembly a Assembling the meat Grinder n c ccccccccsesscscsssscsesesscsesecsesesecsesescscsesscsesscscseeecseseecsesessesesesseseeass 3 b Assembling the sausage GHOCHIMEND assess ada awe WA EEEE 4 c Assembling the kubbe attachment c ccccccccscsesscsesscscscsecscseeecseseescsesscsesesecsesecscsesecseseeseseeeeeeass 4 d Assembling the biscuit pastry attachments ccccccssssssessssesccesesesseseseseseeeeseseseseeseseseecseeeseseeeees 4 6 Operation 5 a Operaling Ihe appliance ee a a een ee ee en eee ee eres 5 By PIOCCSANG TNS MN er E aeassscssatoamsacacansacanconeoaneiaesestece 5 el Processing sausage MEGA O O OJ O Eu Ain 6 d Using the kubbe GCC NIA azot o EA COO PZW 6 FVII Or GONE OSB PRN PE CORE 6 7 Troubleshooting 7 8 Cleaning 7 al Cleaning the motor Blook aaa wasze OOO UE a rj Zedo 7 DI CLS GI Ht RC CSS ES i EO EE GEO OO odd 7 9 Storage 8 10 Disposal 8 11 Warranty and service 8 12 Importer 9 13 Recipes 9 SSJ of PPP PEC PEC 9 Fe SA CPI ste of OC 10 Di GB e A OOO AAA 10 Read the operating instructions carefully before using the a
6. com 13 Recipes Kubbe Ingredients for the wrapping 450g of lean mutton veal or beef 150g flour 1 Tsp Pimento type of pepper 1 Tsp Nutmeg 1 Pinch Chili powder 1 Pinch Pepper Ingredients for the meat filling 700g Mutton 1 1 2 Tbsp olive oil 1 1 2 Tbsp Onions finely chopped 1 2 Tsp Pimento type of pepper 1 2 Tsp Salt 1 1 2 Tbsp Flour Pass the meat for the wrapping through the meat grinder twice first with the coarse and then with the fine cutting discs and then combine it with the in gredients Then pass this mixture through the meat grinder twice Exchange the cutting disc for the Kubbe attachment see chapter Assembling the kubbe attachment Shape the Kubbe wrappers with the Kubbe attachment then freeze them Filling Pass the meat through the meat grinder twice first with the coarse and then with the fine cutting discs Saute the onions and then mix them well with the meat and other ingredients Fill the Kubbe wrap pers and fry until done Alternative Fillings 250g steamed broccoli or 250g steamed zucchini or 250g cooked rice Fresh Grill Sausages Ingredients 300g lean Beef 500g lean Pork 200g Shoulder bacon 20g Salt 1 2 Tbsp ground white Pepper 1 Tsp Caraway 1 2 Tsp Nutmeg Pass the beef pork and bacon through the meat grinder twice Add the mixed spices and salt and thoroughly knead for 5 minutes Place the sausage filling in the refrigerator for ca 30 minutes
7. ctivate the buttons ON or REV with a change of rotation direction if the appliance motor has not come to a complete stop This could damage the motor A Warning NEVER open the housing of the motor block it does not contain any user serviceable elements If the housing is opened the warranty becomes void If the housing is opened there is a risk of receiving a potentially fatal electric shock a Operating the appliance Once the appropriate attachments have been fixed e Place the appliance where it will at all times be absolutely stable and under no circumstances could it fall off of the work surface or in any way come into contact with water due to vibrations or becoming snagged in the power cable Vi bration is unavoidable when it is working A Warning Never touch a machine which is plugged in or is operational when it happens to fall or land in water or in the case of other emergencies First unplug the appliance in all emergency situations Otherwise one runs the risk of serious injury or loss of life e Place the food to be processed into the feed tray and position a container under the exit ope ning to collect the processed food e First press the OFF button to check that the appli ance is still switched off Otherwise there is a risk that the appliance could unintentionally start when the plug is inserted into the power socket Then put the plug into the socket e Press the button ON to start the ap
8. h greaseproof paper and place or hold it directly under the exit opening at the front of the appliance Press pastry evenly into the meat grinder casing the transport screw then pushes it through the design on the pattern strip of the biscuit at tachment e When the biscuit is the required length stop the appliance and break the pastry off at the exit opening Lay the biscuits on the baking tray 7 Troubleshooting If the drive is blocked by accumulated food e Press the OFF button to stop the meat grinder e Hold the REV button pressed down The app liance will now run in the reverse direction This enables you to transport the food which has be come stuck a short way backwards and the motor to run freely again When the drive runs smoothly again release the REV button Press the ON button to re start the meat grinder e If you do not succeed in getting the drive free with this clean the appliance as described in chapter 8 Cleaning Should the motor suddenly stop it could be due to automatic activation of the internal overload device This is intended to protect the motor e Switch the appliance off and allow it cool down for approximately 30 minutes before continuing to use it e Should this time period not be sufficient wait for a further 15 minutes e Fit still does not function at the end of this period this indicates a technical problem In this case contact the Service Centre
9. hat the indentations on the cutting disc lie on the fixing points in the meat grinder casing When everything has been correctly assembled screw the ring clamp on until it is handtight e The assembled meat grinder is connected to the motor block by a bayonet connector Insert the meat grinder casing into the motor block such that the arrow on the feeding shaft lies against the symbol U on the motor block The locking button presses itself in Fig O Lightly press the meat grinder casing in and at the same time turn the feeding shaft on the meat grinder casing into the middle position Fig so that the arrow on the feeding shaft lies against the symbol Q When the meat grinder casing engages the locking button springs out Finally place the feed tray on top of the feeding funnel To dismantle it press the locking button and turn the feeding funnel to the right Fig U You can now pull the meat grinder casing out b Assembling the sausage attachment Unfold the fold out side There you will find the step by step illustrations for assembling the appliance e Remove the meat grinder casing as described under a e Disassemble any attachments that might be fitted and clean the meat grinder casing Note The cross blade with the spring is not requi red for the sausage attachment If need be re move them both from the meat grinder casing e Coat all me
10. it out before fixing it This will make the natural sausage skin more elastic Natural sausage skins are available from butcher suppliers close to slaughter houses or from your family butcher e The sausage mixture will be pressed through the sausage attachment and into the sausage skin When it is long enough switch the appliance off press the sausage together at the ends and rotate it a couple of times along its longitudinal axis Tip Sausage meat tends to expand when cooked or fro zen Therefore to prevent it from bursting it is best not to overstuff the sausage When you have read all of the instructions about the topic Sausage you can take the appliance into use as described under 6 a d Using the kubbe attachment With the kubbe attachment foodstuffs can be processed to form hollow rolls of meat or vegeta bles which can then be stuffed as desired Put the meat through the meat grinder twice be fore pressing it through the kubbe attachment When you have read all the instructions about the topic Kubbe attachment you can take the appliance into use as described under 6 a e Making biscuit pastry When you have prepared a biscuit pastry accor ding to your recipe and have fixed the biscuit at tachment When you have read all the instructions about the topic biscuit attachment you can take the appliance into use as described under 6 a e Line a small baking tray wit
11. n your receipt as proof of purchase In the event of a warranty claim please make contact by telephone with our Service Depart ment Only in this way can a post free despatch for your goods be assured The warranty covers only claims for material and maufacturing defects but not for transport damage for wearing parts or for damage to fragile compo nents e g buttons or batteries This product is for private use only and is not intended for commercial use The warranty is void in the case of abusive and improper handling use of force and internal tampe ring not carried out by our authorized service branch Your statutory rights are not restricted in any way by this warranty The warranty period will not be extended by repairs made under warranty This applies also to replaced and repaired parts Any damage and defects extant on purchase must be reported immediately after un packing the appliance at the latest two days after the purchase date Repairs made after the expira tion of the warranty period are subject to payment DES UK LTD Tel 0871 5000 700 0 10 minute e mail support uk kompernass com CIE Kompernass Service Ireland Tel 1850 930 412 0 082 EUR Min Standard call rates apply Mobile operators may vary e mail support ie kompernass com CY Kompernass Service Cyprus Tel 800 9 44 01 e mail support cyQkompernass com 12 Importer KOMPERNASS GMBH BURGSTRASSE 21 D 44867 BOCHUM www kompernass
12. nder a Disassemble any attachments that might be fitted and clean the meat grinder casing O Note The cross blade with the spring is not requi red for the biscuit attachment If need be remo ve them both from the meat grinder casing e Coat all metal parts with cooking oil e Remove the pattern strips from the front of the biscuit attachment e First place the plastic disc and then the metal disc of the biscuit attachment into the meat grinder casing see fold out side Position the biscuit attachment so that the indentations on the biscuit attachment lie on the fixing points in the meat grinder casing When everything has been correctly assembled screw the ring clamp on until it is handtight e Re attach the pattern strips to the front part of the biscuit attachment Ensure that the grip on the pattern strips points away from the appliance If it does not you will not be able to adjust the pattern which is located directly on the grip e Assemble the meat grinder casing as described under a e To dismantle it you must first remove the pattern strips before you can screw open the ring clamp and take the biscuit attachment out 6 Operation A Important Do not use the appliance for longer than 15 minutes continuously To avoid an overheating of the app liance after such a period switch it off and allow it to cool down for ca 30 minutes A Important NEVER a
13. om this person instruction in how the appliance is to be used e Children should be supervised to ensure that they do not play with the appliance e Never operate the appliance in a no load condi tion This could irreparably damage the appliance 5 Assembly Disassembly A IMPORTANT All accessories are coated with a thin film of oil to protect them from corrosion Therefore carefully clean all of the parts before using the appliance for the first time as com prehensively described on chapter 8 Clea ning After subsequent usage always apply a light coating of cooking oil to the metallic components a Assembling the meat grinder Unfold the fold out side There you will find the step by step illustrations for assembling the appliance e Place the transport screw into the mincer casing e Place the spring onto the transport screw Then place on the cross blade so that the sharp side points away from the spring A Caution The cross blade is very sharp Risk of injury A Important The appliance will be damaged if the cross blade is inserted the other way around e Select the desired cutting disc The cutting discs that are not required can be stored in the small compartment on the appliance Fig To open it press on the symbol on the cover The cover can now be opened Insert the two unrequired cutting discs e Insert the selected cutting disc into the meat grinder casing so t
14. pliance A Important Now push the foodstuff into the feeding shaft ONLY with the round stodger NEVER with one s fingers forks spoonhandles or similar objects This could lead to injury and also damage the appliance A Important Do not ever press so hard that the motor gets audibly slower This could overburden the machine under pressure and damage it b Processing meat e Use pieces of meat that fit without problem into the feeding shaft If needs be cut the meat up into smaller pieces Check that the meat does not have any bones and or tendons A Caution Minced meat is very prone to bacterial contamina tion Therefore take care to maintain good hygiene when processing meat When you have read all the instructions on the topic Meat you can take the appliance into use as described under 6 a c Processing sausage meat e Pass meat through the meat grinder twice before using it as sausage stuffing e To make sausage stuffing add some chopped onions spices and other ingredients to the minced meat as per your recipe and knead the mixture well Refrigerate it for 30 minutes before proces sing it further e Position the sausage skin natural or artificial on the sausage attachment and close the other end with a knot For 1 kg of the filling you will need approximately 1 60 m of sausage skin Tip Soak the natural sausage skin in lukewarm water for about 3 hours before using it and wring
15. ppliance for the first time and preserve this booklet for later reference Pass the manual on to whomsoever might acquire the appliance at a later date 1 MINCER 1 Intended use This appliance is intended for use in domestic house holds and for the processing of foodstuffs in small quantities e Mincing fresh meat e Making sausages with natural or artificial sausage skin e Making shortbread biscuits This appliance is not intended for the processing of frozen foods or other hard foodstuffs e g bones or nuts or for use in commercial or industrial environ ments 2 Technical data Voltage 220 240 V 50 Hz Power consumption 250 W Protection class II E C O time 15 minutes C O Time The C O Time Continuous Operation details how long an appliance may be used without the motor overheating and being damaged When the given C O Time has lapsed the appliance must be switched off until the motor has cooled itself down 3 Items supplied Biscuit attachment with pattern strips Stodger Feed tray Motor block Meat grinder casing made of metal Transport screw Spring Cross blade Coarse and fine cutting discs Clamping ring Sausage attachment Sausage disc Kubbe attachment A Safety Instructions A To avoid potentially fatal electric shocks e Ensure that the power cable does not become damaged Protect the cable from heat and ensure that it cannot
16. tal parts with cooking oil e Take the sausage disc from the small com partment on the top of the appliance Fig Position the sausage disc so that the indenta tions in the sausage disc lie on the fixing points in the meat grinder casing Then place the sausage attachment before the sausage disc Screw the ring clamp on hand tight e Assemble the meat grinder casing as described under a c Assembling the kubbe attachment Unfold the fold out side There you will find the step by step illustrations for assembling the appliance e Disassemble the meat grinder casing as de scribed under a Disassemble any attachments that might be fitted and clean the meat grinder casing Note The cross blade with the spring is not requi red for the Kubbe attachment If need be remo ve them both from the meat grinder casing e Coat all metal parts with cooking oil e Insert both plastic parts of the Kubbe attachment so that the indentations on the Kubbe attach ment lie on the fixing points in the meat grin der casing When everything has been correctly assembled screw the ring clamp on until it is handtight e Assemble the meat grinder casing as described under a d Assembling the biscuit pastry attachments Unfold the fold out side There you will find the step by step illustrations for assembling the appliance e Remove the meat grinder casing as described u
Download Pdf Manuals
Related Search