Kinyo D-655 User's Manual
Contents
1. by the A and Y keys If you don t make any adjustments within 8 seconds it will quit this mode automatically b Press TEST ADJUST again to adjust volume level for CEN channel The CEN speaker will emit a test sound and then you can adjust the volume level by the A and W keys If you don t make any adjustments within 8 seconds it will quit this mode automatically C Press TEST ADJUST again to adjust volume level for FR channel The FR speaker emits test sound and then you can adjust the volume level by adjusting A and W keys If you don t do any action in 8 seconds it will quit this adjust mode automatically d Press TEST ADJUST again to adjust volume level for RR channel The RR speaker emits test sound and then you can adjust the volume level by adjusting A and W keys If you don t make any adjustments within 8 seconds it will quit this adjust mode automatically e Press TEST ADJUST again to adjust volume level for RL channel The RL speaker emits test sound and then you can adjust the volume level by adjusting A and W keys If you don t make any adjustments within 8 seconds it will quit this adjust mode automatically f Press TEST ADJUST again to adjust volume level for SUB channel The SUB speaker emits sound and then you can adjust the volume level by adjusting A and W keys If you don t make any adjustments within 8 seconds it will quit this mode automatically g Press TEST ADJUST again to quit this function 92. output power 20W RMS 60Hz 300Hz L F E Impedance 4 ohm SW 5000 external dimensions W 280 x H 230 x D 297 mm 1114 x 9x 1134 inch
3. 6 KINYO 5 1CH HOME THEATER SPEAKER SYSTEM D 655 Important Safety Instructions 1 Read Instructions All the safety and operating instructions should be read before the speaker is operated 2 Retain Instructions The safety and operating instructions should be retained for future reference 3 Heed Warning All warnings on the speaker and in the operating instructions shouki be adhered to 4 Follow Instructions Ali operation and use instructions should be followed 5 Water and Moisture The speaker should not be used near water for example near a bathtub washbow kitchen sink in a wet basement or near a swimming pool and that alike 6 Ventilation The speaker should be situated so that it s location or position does not interfere with its proper ventilation For example the speake should not be situated on the bed sofa rug or similar surface that may block the ventilation openings or placed in a confined area such as bookcase or cabinet that may impede the flow of air through the ventilation opening 7 Heat The speaker should be situated away from heat sources such as radiators heat registers stoves or other speaker including amplifier that produce heat 8 Power Sources The speaker should be connected to a power supply only of Ihe type described in the operating instructions or as marked on the speaker 9 Grounding or Polarization Precaution should be taken so that the grounding or polarization means of the speaker is n
4. TEST ADJUST LED When LED is flashing you can adjust the volume level of each channel Press TEST ADJUST When LED is flashing you can adjust the volume level of each channel BALANCE by pressing the A and W keys OPTICAL COAXIAL ANALOG DOLBY DIGITAL and PRO LOGIC SPEAKE R MODE all have different LED indicators When lit they will indicate what volume level you adjusted See table blow uis vee pem co ne ee e GP XD GR CAE RECON S Fe pene me me me Dm T m wor I I CEI 10 MUTE Switches the system to mute mode 11 4 UP KEY Adjusts the level of delay time volume in test mode and volume in listening mode 12 DOWN KEY Adjusts the level of delay time volume in test mode and volume in listening mode 13 MASTER VOLUME Adjusts the system volume level 1 Power Press the red power key to switch it to on or off mode 2 Reset Press the Reset key to make it return to the default setting 3 Delay Press this cycle key to adjust Center Adjustment Surround Adjustment Quit this function See the details as above 4 Listening Mode Press it to select the listening mode Maximum Standard and Late night See details as above 5 Mute Switches the system to mute mode 6 Input Select the exact input cable according to the audio device you are using ie Optical Digital Coaxial Digital or Analog 7 Test To test and adjust the volume level of each chann
5. el See details as above 8 Pro Logic CFG Switch the Pro Logic function On or Off Stereo mode 9 Volume Adjust the Volume level by using the A UP KEY and Y DOWN KEY Note The function can only be used when the Volume turntable on the panel is in Minimum position DOLBY DIGITAL DECODER C 60 BACK INPUTS COAXIAL Accepts RCA plugs Coaxial input from audio source DVD player or Sound card coaxial digital output OPTICAL Accepts OPTICAL Fiber plugs TOSLINK input from audio sources DVD player or Sound card optical digital output ANALOG RCA JACKS Accepts RCA plugs input from audio source analog input OUTPUTS FL FR Accepts 3 5 mm stereo mini plug connected to Subwoofer via G9 DIN cable RL RR Accepts 3 5 mm stereo mini plug connected to Subwoofer via G9 DIN cable CEN SUB Accepts 3 5 mm stereo mini plug connected to Subwoofer via G9 DIN cable POWER DC 9V Accepts input from power adapter DC 9V 800 mA INPUT SUBWOOFER G9 DIN jack Accepts the outputs signals from the decoder OUTPUT Subwoofer FL Accepts RCA cable connected to the Front Left Speaker FR Accepts RCA cable connected to the Front Right Speaker RL Accepts RCA cable connected to the Rear Left Speaker RR Accepts RCA cable connected to the Rear Right Speaker CEN Accepts RCA cable connected to the Center Speaker Speaker Power Switch When it is switched t
6. f Dolby Laboratories Confidential unpublished works c 1992 1997 Dolby Laboratories All right reserved WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE NO USER CAUTION PILOT LAMP SOLOERED IN PLACE TO REDUCE THE RISK OF ELECTRIC SHOCK REFER TO REFER SERVICING TO QUALIFIED SERVICE PERSONNEL QUALIFIED SERVICE PERSONNEL The lighting flash with arrowhead symbol with an equilateral The exciamation point within an equilateral triangle triangle is intended to alert the user to the presence of is intended to alert the user to the presence of important uninsulated dangerous voltage within the product s enclosure operating and maintenance servicing instructions in the that may be of sufficient magnitude to constitute a risk of literature accompanying the appliance electric shock to persons DOLBY DIGITAL DECODER C 60 PRO LOGIC LISTENING STEREO MODE SPEAKER DELAY MUTE SETUP TIME FRONT 1 STANDBY When pressed the decoder is turned on and receives power a STANDBY LED Red light means in standby mode green light means ready for use 2 INPUT Select different input modes optical coaxial or anaglog a OPTICAL LED When light is on input mode is optical digital b COAXIAL LED When light is on input mode is coaxial digital 6 ANALOG LED When light is on input mode is analog 3 DOLBY DIGITAL LED When light is on Dolby digital sound effec
7. he LED is light and receiving power the speaker system is turned on NOTE If you want to delete the setting from memory unplug the adapter and the unit will return to the original factory default setting ASSEMBLING DESCRIPTION WOOFER FRONT RIGHT SPEAKER CS i CD VCD PLAYER CENTER SPEAKER DVD PLAYER PC DVD 1 E SPECIFICATIONS 3 C 60 Decoder Center Frequency Input Mode Analog Signals Use 2 RCA terminator stereo signal input Digital Signals Use coaxial cable and fiber optical cable input mode Externally equipped with eleven buttons for STANDBY INPUT PRO LOGIC STEREO SPEAKER SETUP LISTENING MODE DELAY TIME TEST ADJUST MUTE A UP Button W DOWN Button MASTER VOLUME function Output 3 stereo outputs FL FR RL RR CEN SUB Joints Front left and right analog signal output Rear left and right surround analog signal output Central and Super Bass analog signal output External Dimensions W 268 x H 90 x D 193mm 1012 x 31 2 x 7213 inch Center speaker 3 Full Range speaker 120 Hz 20KHz response frequency Impedance 4 ohm Standard output power 5 Watts Front Satellite Speaker and Surround Speaker RS 55 satellite speaker Standard output power of each channel 5Watts 3 Full Range speaker 120Hz 20KHz response frequency Impedance 4 ohm External dimensions W 90 x H 90 D 90mm 31 2 x 312 x 31 2 inch Subwoofer 14 subwoofer standard
8. ot defeated 10 Power Cord The power supply cord should be routed so that they are not likely to be walked on or pinched by items place upon or against them Do not overload wall outlets and extension cords as this can result in risk of fire or electrical shock 11 Cleaning The unit should be unplug from the power outlet before cleaning Use a dampened cloth to clean the surface of the unit Do not use liquid cleaners or aerosol cleaner Newer insert object of any kind into the unit through its opening as they may touch dangerous voltage points Or short out parts that could result in fire or electrical shock 12 Object and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings 13 Damage Requiring Service The speaker should be serviced by qualified service personnel when A The power supply cord or the plug has been damaged or B Objects have fallen or liquid has been spilled into the speaker or C The speaker has been exposed to rain or D The speaker has been dropped or the enclosure damaged E The speaker does not appear to operate normally or exhibits noticeable change in performance 14 Service The user should not attempt to service beyond that described in the user s guide All other servicing should be referred to qualified service personnel Manufactured under license from Dolby Laboratories Dolby Pro Logic and the double D symbol are trademarks o
9. ss the Delay Time key for the first time and the LISTENING MODE amp DELAY TIME LED s will flash Now you can adjust the delay time for the Center channel by using the A and W buttons When adjusting the OPTICAL COAXIAL ANALOG DOLBY DIGITAL and PRO LOGIC STEREO LED s are used to indicate the delay time you have selected See table below LISTENING DELAYTI TIME DOLBY b SURROUND DELAY TIME Press the Delay Time key for the first the time and the TEST ADJUST amp DELAY TIME LED s will flash Now you can adjust the delay time for Surround channel by using the A and W button When adjusting the OPTICAL COAXIAL ANALOG DOLBY DIGITAL and PRO LOGIC STEREO LED s are used to indicate the delay time you have selected See table blow DELA ons us L RROUND TIME DELAY GR i E p I e Press DELAY TIME again to exit this function n n I t 8 TEST ADJUST Press it and the decoder will send a signal to check each channel one at a time Channel FL CEN FR RR RL SUB Then you may start to adjust the volume level of each channel starting from FL channel If you want to skip TEST function during this cycle press TEST ADJUST again It will skip the cycle test and allow you to adjust the volume level of each channel from the first channel FL You may also press MUTE any time to quit the adjust function a The FL speaker will emit a test sound and then you can adjust the volume level
10. t is enabled Only available when the input mode is Optical or Coaxial connected to DVD player 4 PRO LOGIC STEREO Enables the Dolby Pro logic 5 1 sound effect Only available when the input mode is analog from 2 CH audio devices or SPDIF PCM from DVD a PRO LOGIC STEREO LED When light is on Pro Logic is enabled Pro Logic is the factory default setting Note Prologic function is available only for selected input sources such as Dolby 2 0 PCM or Analog Please check the signal type 5 SPEAKER SETUP Switch to or from the big or small speaker it will enhance bass effect when in small speaker mode a SPEAKER SETUP LED When light is on Dolby small speaker is on 6 LISTENING MODE Press it then you may select the listening mode Maximum standard or late night a LISTENING MODE LED Press the listening mode key the flashing LED means you can now select different modes Maximum standard or late night Press LISTENING MODE key and then adjust A and W key to select the mode you prefer At this time the OPTICAL COAXIAL and ANALOG LED will have different indications and will show you what mode you have selected See table below LISTENING LISTENING MODE LED OPTICAL LED COAXAL LED ANALOG LED MODE Press LISTENING MODE again to exit setup 7 DELAY TIME Press this cycle key to adjust Center Adjustment Surround Adjustment Quit this function a CENTER DELAY TIME Pre
Download Pdf Manuals
Related Search