Kettler CHAIR 2566 User's Manual
Contents
1. Ocean Comfort products are constructed from HDPE High Density Polyethelene primarily a recycled material UV inhibitors are also added to resist fading Simply maintain your furniture by cleaning with soap and warm water to ensure its long lasting beauty A soft bristle brush can be used on any tough to clean stains Stainless steel hardware is used in the assembly of these products and should be rinsed regularly with fresh water if being used in a coastal environment KETTLER Limited Warranty Ocean Comfort products are guaranteed for a period of 20 years for residential use and 5 years for commercial use starting from original purchase date This warranty covers defects in materials and or workmanship and does not apply to the hardware Warranty not applicable to any products deemed as misused abused or damaged due to an uncontrollable act of nature For Parts and Service please contact us directly at 866 804 0440 or email parts kettlerusa com KETTLER Made in the U S A KETTLER International Inc 1355 London Bridge Road Virginia Beach VA 23453 www kettlerusa com info kettlerusa com2. Contents 1 Seat 1 Back 2 Arm Rests 2 Front Chair legs 2 Back Chair legs 2 Cross Braces 2 Rocker Feet Tools Required 16 1 4 20 x 2 Bolts 6 1 4 20 x 2 1 2 Bolts 10 Washers 10 Locknuts Locknut Washer Bolt ff O CC 3 Phillips Head Screwdriver 7 16 Wrench to attach front legs a Align predrilled holes then insert bolts b Align predrilled holes then insert bolts to attach back legs Place arm rest on top of chair legs align front Properly Seated Washer and Nut Copyright Kettler USA 309 01 ey lt predrilled holes insert bolt Attach the back of the chair by aligning holes on Attach the braces to the legs by aligning holes and inserting a 2 bolt Attach the rocker to the legs by aligning holes to metal insert A use a3 bolt v Slide washer then locknut onto end of bolt then tighten S the arm and the seat to insert bolt Assembly Instructions G a With the wing on the post facing front align the predrilled holes on front leg to the seat and insert the 1 4 20 x 2 Bolts through the leg in thru the seat Clean any plastic residue from the bolt then slide a washer on Screw on the locknut and then tighten it with the wrench and phillips screwdriver b Align the predrilled holes on the back leg to the seat and insert the 1 4 20 x 2 Bolts through the leg in
3. thru the seat Clean any plastic residue from the bolt then slide a washer on Screw on the locknut and then tighten it with the wrench and phillips screwdriver Repeat on the other front leg 2 Place arm rest on top of chair legs align the front predrilled holes and insert the 1 4 20 x 2 Bolts through the leg and in thru the arm Clean off any plastic residue then slide a washer on the end of bolt Screw on the locknut and then tighten it with the wrench and phillips screwdriver G a Attach the back of the chair to the seat by aligning holes and inserting a 1 4 20 x 2 Bolt then tighten with a phillips screwdriver b Attach the back of the chair to the arm by aligning holes and inserting a 1 4 20 x 2 1 2 Bolt thru the arm leg and into the chair back then tighten with a phillips screwdriver Repeat on both sides 4 attach the cross braces of the chair to the legs by aligning holes and inserting a 1 4 20 x 2 Bolt through the leg into the cross brace and tighten with a phillips screwdriver Repeat on other leg Do Front and Back cross braces ore the rocker for the chair Align the predrilled hole on the rocker to the metal isert at the bottom of the leg and insert a 1 4 20 x 2 1 2 bolt then tighten with the screwdriver Bolt both front and back legs KETTLER Made in the U S A www kettlerusa com info kettlerusa com www kettlerusa com ats ECO RESPONS Care amp Maintenance
Download Pdf Manuals
Related Search