Keating Of Chicago Bob Evans Farm Series 2000 User's Manual
Contents
1. SERVICE INSTRUCTIONS C arneo KEATING on y OF CHICAGO INC THERMOSTAT CALIBRATION SERIES 2000 GAS FRYERS Bob Svaus FARMS Calibration is not covered under warranty Tools Accurate fryer thermometer Standard screwdriver Standard Phillips Head screwdriver Note Thermostat is pre set to 350 at Factory See note eee 4 amp 6 OF CHICAGO INC Turn on fryer Allow fryer burners to cycle on and off three times Place an accurate thermometer in the oil Locate thermometer in same position for every calibration Left rear corner of fryer vessel is recommended 4 Remove 2 Pan Head Phillips screws from control panel front Put screws in secure place Lower control panel front Thermostatcalibration Thermostat knob removed to reveal calibration screws 5 If temperature of fryer is found to be less than 15 F off remove the thermostat knob Loosen the two screws in the thermostat dial plate Replace knob Reset the dial plate to match the thermometer reading 6 Put control panel in upright position Fasten 2 Pan Head Phillips screws into holes on control panel For calibration over 15 F difference contact a qualified service company BEFCal2000GasFry 10 08
Download Pdf Manuals
Related Search